Bug#1043031: Probably not a bug in xserver-xorg
I found the external monitor working when booting linux-image-6.3.0-2-amd64. It doesn't work with linux-image-6.4.0-1-amd64 or linux-image-6.4.0-2-amd64. So probably this bug should be reassigned to the kernel package
Bug#1043031: xserver-xorg: second monitor not working
Package: xserver-xorg Version: 1:7.7+23 Severity: normal Working on a thinkpad, external monitor (the dell monitor listed in Xorg.0.log below) attached via docking station. When booting, output up to and including grub is shown on the external monitor. xrandr shows the connected monitor, but it can't be enabled. -- Package-specific info: /etc/X11/X does not exist. /etc/X11/X is not a symlink. /etc/X11/X is not executable. VGA-compatible devices on PCI bus: -- 06:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Picasso/Raven 2 [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15d8] (rev d2) /etc/X11/xorg.conf does not exist. Contents of /etc/X11/xorg.conf.d: - total 0 /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): --- Linux version 6.4.0-1-amd64 (debian-ker...@lists.debian.org) (gcc-13 (Debian 13.1.0-9) 13.1.0, GNU ld (GNU Binutils for Debian) 2.40.90.20230720) #1 SMP PREEMPT_DYNAMIC Debian 6.4.4-2 (2023-07-30) Xorg X server log files on system: -- -rw-r--r-- 1 root root 55487 Jul 6 21:40 /var/log/Xorg.1.log -rw-r--r-- 1 root root 53152 Aug 4 19:34 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): - [ 9.123] X.Org X Server 1.21.1.8 X Protocol Version 11, Revision 0 [ 9.123] Current Operating System: Linux gandalf 6.4.0-1-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.4.4-2 (2023-07-30) x86_64 [ 9.123] Kernel command line: BOOT_IMAGE=/vmlinuz-6.4.0-1-amd64 root=/dev/mapper/gandalf--vg-root ro quiet [ 9.123] xorg-server 2:21.1.8-1 (https://www.debian.org/support) [ 9.123] Current version of pixman: 0.42.2 [ 9.123] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 9.123] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 9.123] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 4 19:07:18 2023 [ 9.124] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 9.124] (==) No Layout section. Using the first Screen section. [ 9.124] (==) No screen section available. Using defaults. [ 9.124] (**) |-->Screen "Default Screen Section" (0) [ 9.124] (**) | |-->Monitor "" [ 9.125] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 9.125] (==) Automatically adding devices [ 9.125] (==) Automatically enabling devices [ 9.125] (==) Automatically adding GPU devices [ 9.125] (==) Automatically binding GPU devices [ 9.125] (==) Max clients allowed: 256, resource mask: 0x1f [ 9.126] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 9.126] Entry deleted from font path. [ 9.127] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 9.127] (==) ModulePath set to "/usr/lib/xorg/modules" [ 9.127] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 9.127] (II) Loader magic: 0x55ee0211df00 [ 9.127] (II) Module ABI versions: [ 9.127] X.Org ANSI C Emulation: 0.4 [ 9.127] X.Org Video Driver: 25.2 [ 9.127] X.Org XInput driver : 24.4 [ 9.127] X.Org Server Extension : 10.0 [ 9.128] (++) using VT number 7 [ 9.128] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 9.130] (II) xfree86: Adding drm device (/dev/dri/card0) [ 9.130] (II) Platform probe for /sys/devices/pci:00/:00:08.1/:06:00.0/drm/card0 [ 9.161] (--) PCI:*(6@0:0:0) 1002:15d8:17aa:5125 rev 210, Mem @ 0xc000/268435456, 0xd000/2097152, 0xd050/524288, I/O @ 0x1000/256, BIOS @ 0x/131072 [ 9.161] (II) LoadModule: "glx" [ 9.162] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 9.167] (II) Module glx: vendor="X.Org Foundation" [ 9.167] compiled for 1.21.1.8, module version = 1.0.0 [ 9.167] ABI class: X.Org Server Extension, version 10.0 [ 9.167] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0 [ 9.167] loading driver: amdgpu [ 9.167] (==) Matched amdgpu as autoconfigured driver 0 [ 9.167] (==) Matched ati as autoconfigured driver 1 [ 9.167] (==) Matched modesetting as autoconfigured driver 2 [ 9.167] (==) Matched fbdev as autoconfigured driver 3 [
Bug#902295: Fixed with 4.17.0-1
The problem no longer appears with linux-image-4.17.0-1-amd64 and nvidia-kernel-dkms 390.67-3.
Bug#902295: linux-image-4.16.0-2-amd64: invalid opcode / general protection fault with nvidia graphics module
Package: src:linux Version: 4.16.16-2 Severity: normal Dear kernel maintainers, with kernel 4.16.0-2-amd64, the nvidia module produces the following errors. Screen remains blank instead of graphical login mask. Same nvidia modules with kernel 4.16.0-1-amd64 works fine (which is why I'm using that configuration for reporting the bug). /var/log/syslog: Jun 24 17:31:44 localhost kernel: [ 33.374712] [ cut here ] Jun 24 17:31:44 localhost kernel: [ 33.374714] Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLUB object 'nvidia_stack_cache' (offset 11440, size 3)! Jun 24 17:31:44 localhost kernel: [ 33.374723] WARNING: CPU: 2 PID: 985 at /build/linux-hny3SU/linux-4.16.5/mm/usercopy.c:81 usercopy_warn+0x7e/0xa0 Jun 24 17:31:44 localhost kernel: [ 33.374723] Modules linked in: btusb btrtl btbcm btintel bluetooth drbg ansi_cprng ecdh_generic iTCO_wdt snd_hda_codec_hdmi arc4 iTCO_vendor_support intel_rapl iwldvm snd_hda_codec_realtek mac80211 iwlwifi snd_hda_codec_generic x86_pkg_temp_thermal snd_hda_intel intel_powerclamp snd_hda_codec thinkpad_acpi coretemp cfg80211 wmi_bmof kvm_intel pktcdvd tpm_tis tpm_tis_core mei_me nvram snd_hda_core mei kvm rfkill irqbypass shpchp snd_hwdep snd_pcm snd_timer sg snd soundcore video battery tpm lpc_ich ac rng_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate button joydev evdev serio_raw wmi intel_uncore intel_rapl_perf pcspkr nvidia_drm(PO) drm_kms_helper drm nvidia_modeset(PO) nvidia(PO) ipmi_devintf ipmi_msghandler parport_pc ppdev sunrpc lp parport loop dm_crypt ip_tables x_tables Jun 24 17:31:44 localhost kernel: [ 33.374757] autofs4 ext4 crc16 mbcache jbd2 fscrypto ecb dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_cherry raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod hid_generic usbhid hid sr_mod cdrom sd_mod crc32c_intel ahci libahci aesni_intel ehci_pci aes_x86_64 sdhci_pci xhci_pci crypto_simd cqhci xhci_hcd libata ehci_hcd firewire_ohci cryptd glue_helper sdhci psmouse scsi_mod i2c_i801 firewire_core mmc_core usbcore crc_itu_t e1000e usb_common thermal Jun 24 17:31:44 localhost kernel: [ 33.374784] CPU: 2 PID: 985 Comm: Xorg Tainted: P O 4.16.0-1-amd64 #1 Debian 4.16.5-1 Jun 24 17:31:44 localhost kernel: [ 33.374784] Hardware name: LENOVO 2392CTO/2392CTO, BIOS G4ET62WW (2.04 ) 09/13/2012 Jun 24 17:31:44 localhost kernel: [ 33.374786] RIP: 0010:usercopy_warn+0x7e/0xa0 Jun 24 17:31:44 localhost kernel: [ 33.374787] RSP: 0018:b2ba8168fb60 EFLAGS: 00010282 Jun 24 17:31:44 localhost kernel: [ 33.374788] RAX: RBX: 939ac0d92cb0 RCX: 0006 Jun 24 17:31:44 localhost kernel: [ 33.374789] RDX: 0007 RSI: 0096 RDI: 939addc96730 Jun 24 17:31:44 localhost kernel: [ 33.374789] RBP: 0003 R08: 0362 R09: 0004 Jun 24 17:31:44 localhost kernel: [ 33.374790] R10: a5c769d0 R11: 0001 R12: 0001 Jun 24 17:31:44 localhost kernel: [ 33.374791] R13: 939ac0d92cb3 R14: R15: 939ac0d92cf8 Jun 24 17:31:44 localhost kernel: [ 33.374792] FS: 7f866b1b26c0() GS:939addc8() knlGS: Jun 24 17:31:44 localhost kernel: [ 33.374792] CS: 0010 DS: ES: CR0: 80050033 Jun 24 17:31:44 localhost kernel: [ 33.374793] CR2: 7f86650bfdc0 CR3: 000182b0a004 CR4: 001606e0 Jun 24 17:31:44 localhost kernel: [ 33.374794] Call Trace: Jun 24 17:31:44 localhost kernel: [ 33.374799] __check_object_size+0x9c/0x1a0 Jun 24 17:31:44 localhost kernel: [ 33.374915] os_memcpy_to_user+0x21/0x40 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.375075] _nv009383rm+0xbf/0xe0 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.375219] ? _nv028084rm+0x79/0x90 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.375359] ? _nv028084rm+0x55/0x90 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.375493] ? _nv013694rm+0xee/0x100 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.375625] ? _nv015342rm+0x154/0x270 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.375782] ? _nv008316rm+0x134/0x1a0 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.375935] ? _nv008295rm+0x29c/0x2b0 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.376087] ? _nv001072rm+0xe/0x20 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.376239] ? _nv007322rm+0xd8/0x100 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.376383] ? _nv001171rm+0x627/0x830 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.376525] ? rm_ioctl+0x73/0x100 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.376616] ? nvidia_ioctl+0xf0/0x720 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.376706] ? nvidia_ioctl+0x519/0x720 [nvidia] Jun 24 17:31:44 localhost kernel: [ 33.376708] ? kmem_cache_free+0x19c/0x1d0 Jun 24 17:31:44 lo
Bug#692008: ifupdown: Bugfix to 679549 breaks systems not using upstart
Package: ifupdown Version: 0.7.3 Severity: grave Justification: renders package unusable Hi, the modifications introduced to close bug 679549 don't work on systems which don't use upstart, making it impossible to bring interfaces up or down. Could you please install the upstart hooks only if the system actually uses upstart? Thanks, Benjamin (Not sending this mail from the affected machine, so don't rely on the version information below. The version of ifupdown introducing the problem is 0.7.3.) -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages ifupdown depends on: ii dpkg 1.16.9 ii initscripts 2.88dsf-32 ii iproute 20120521-3 ii libc62.13-36 ii lsb-base 4.1+Debian7 ifupdown recommends no packages. Versions of packages ifupdown suggests: ii isc-dhcp-client [dhcp-client] 4.2.4-3 ii net-tools 1.60-24.2 pn ppp pn rdnssd -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#627984: Restrict versions of libsasl2-2 slapd depends on
Package: slapd Version: 2.4.25-1+b1 Severity: important Tags: sid slapd does not work with the latest version of libsasl2-2 in sid (2.1.24~rc1.dfsg1-1): slapd[2816]: @(#) $OpenLDAP: slapd 2.4.25 (May 3 2011 23:46:04) $ ^Ibuildd@biber:/build/buildd-openldap_2.4.25-1+b1-i386-QCBDvS/openldap-2.4.25/debian/b uild/servers/slapd slapd[2816]: slap_sasl_init: auxprop add plugin failed slapd[2816]: slapd stopped. Please add version information to the dependency on libsasl2-2 (<=2.1.13 should be fine) -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.39-1-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages slapd depends on: ii adduser 3.112+nmu2 add and remove users and groups ii coreutils 8.5-1 GNU core utilities ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy ii libc6 2.13-4 Embedded GNU C Library: Shared lib ii libdb4.8 4.8.30-8 Berkeley v4.8 Database Libraries [ ii libgcrypt11 1.4.6-5LGPL Crypto library - runtime libr ii libgnutls26 2.10.5-1+b1the GNU TLS library - runtime libr ii libldap-2.4-2 2.4.25-1+b1OpenLDAP libraries ii libltdl7 2.4-2 A system independent dlopen wrappe ii libperl5.12 5.12.3-7 shared Perl library ii libsasl2-22.1.23.dfsg1-7 Cyrus SASL - authentication abstra ii libslp1 1.2.1-7.8 OpenSLP libraries ii libwrap0 7.6.q-19 Wietse Venema's TCP wrappers libra ii lsb-base 3.2-27 Linux Standard Base 3.2 init scrip ii perl [libmime-base64-perl 5.12.3-7 Larry Wall's Practical Extraction ii psmisc22.13-1utilities that use the proc file s ii unixodbc 2.2.14p2-2 ODBC tools libraries Versions of packages slapd recommends: pn libsasl2-modules (no description available) Versions of packages slapd suggests: ii ldap-utils 2.4.25-1+b1 OpenLDAP utilities -- Configuration Files: /etc/default/slapd changed [not included] -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#624185: linux-image-2.6.38-2-686: fuse module does not load
Package: linux-2.6 Version: 2.6.38-4 Severity: important Tags: sid The fuse module cannot be loaded due to unknown symbol "_kstrtoul". -- Package-specific info: ** Version: Linux version 2.6.38-2-686 (Debian 2.6.38-3) (b...@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-686 root=UUID=fd22fa0f-d09c-4828-8f01-e87d21e05601 ro vga=791 quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 28.497639] XFS mounting filesystem dm-0 [ 28.632602] Ending clean XFS mount for filesystem: dm-0 [ 28.713611] XFS mounting filesystem dm-1 [ 28.900230] Ending clean XFS mount for filesystem: dm-1 [ 30.214824] fuse init (API version 7.16) [ 31.110147] tun: Universal TUN/TAP device driver, 1.6 [ 31.110150] tun: (C) 1999-2004 Max Krasnyansky [ 32.601145] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14 [ 36.49] lp: driver loaded but no devices found [ 36.948641] ppdev: user-space parallel port driver [ 38.111441] tg3 :09:00.0: irq 48 for MSI/MSI-X [ 38.146445] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 41.239778] tg3 :09:00.0: eth0: Link is up at 1000 Mbps, full duplex [ 41.239781] tg3 :09:00.0: eth0: Flow control is on for TX and on for RX [ 41.239916] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 50.943445] Disabling lock debugging due to kernel taint [ 50.943453] nvidia: module license 'NVIDIA' taints kernel. [ 51.915612] nvidia :01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 51.915623] nvidia :01:00.0: setting latency timer to 64 [ 51.915629] vgaarb: device changed decodes: PCI::01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 51.915775] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.44 Sun Feb 27 21:30:31 PST 2011 [ 53.257393] ip_tables: (C) 2000-2006 Netfilter Core Team [ 410.663886] keyboard: can't emulate rawmode for keycode 240 [ 410.663914] keyboard: can't emulate rawmode for keycode 240 [ 411.104246] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 411.286271] usb 3-2: New USB device found, idVendor=413c, idProduct=8140 [ 411.286280] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 411.349336] Bluetooth: Core ver 2.15 [ 411.349359] NET: Registered protocol family 31 [ 411.349361] Bluetooth: HCI device and connection manager initialized [ 411.349363] Bluetooth: HCI socket layer initialized [ 411.434565] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 411.436792] usbcore: registered new interface driver btusb [ 412.047407] iwl3945 :0c:00.0: loaded firmware version 15.32.2.9 [ 412.120502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 414.748120] iwl3945 :0c:00.0: Card state received: HW:Kill SW:On [ 414.748241] iwl3945 :0c:00.0: Not sending command - RF KILL [ 414.748251] iwl3945 :0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [ 414.748260] iwl3945 :0c:00.0: Error setting new configuration (-5). [ 414.748272] iwl3945 :0c:00.0: Not sending command - RF KILL [ 414.748281] iwl3945 :0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [ 414.748287] iwl3945 :0c:00.0: Error setting new configuration (-5). [ 414.748684] keyboard: can't emulate rawmode for keycode 240 [ 414.748709] keyboard: can't emulate rawmode for keycode 240 [ 414.762321] iwl3945 :0c:00.0: Not sending command - RF KILL [ 414.762332] iwl3945 :0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [ 414.762342] iwl3945 :0c:00.0: Error setting new configuration (-5). [ 414.766297] iwl3945 :0c:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x040003DD [ 414.824104] usb 3-2: USB disconnect, address 2 [ 415.441003] keyboard: can't emulate rawmode for keycode 240 [ 415.441028] keyboard: can't emulate rawmode for keycode 240 [ 416.056166] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 416.234505] usb 3-2: New USB device found, idVendor=413c, idProduct=8140 [ 416.234515] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 417.066726] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 422.389988] wlan0: authenticate with 00:03:52:ad:25:84 (try 1) [ 422.395332] wlan0: authenticated [ 422.396549] wlan0: associate with 00:03:52:ad:25:84 (try 1) [ 422.399022] wlan0: RX AssocResp from 00:03:52:ad:25:84 (capab=0xc31 status=0 aid=2) [ 422.399029] wlan0: associated [ 422.400909] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 424.397760] iwl3945 :0c:00.0: Card state received: HW:Kill SW:On [ 424.397882] iwl3945 :0c:00.0: Not sending command - RF KILL [ 424.397890] iwl3945 :0c:00.0: Error sending REPLY_QOS_PARAM: enqueue_hcmd failed: -5 [ 424.397907] iwl3945 :0c:00.0: Not sending command - RF KILL [ 424.397914] iwl3945 :0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [ 4
Bug#581937: Acknowledgement (inn2: nnrpd (still) missing SSL support)
Attached please find a patch proposal which solves the issue. Saluti, Benjamin --- inn-2.5.2-debian/debian/rules 2010-05-17 20:57:05.803848629 +0200 +++ inn-2.5.2/debian/rules 2010-05-17 20:43:13.053870834 +0200 @@ -102,6 +102,7 @@ --with-sasl=/usr \ --with-sendmail=/usr/sbin/sendmail \ --with-zlib=/usr \ + --with-openssl \ $($*_configure_flags) $(configure_flags) touch $@
Bug#581937: inn2: nnrpd (still) missing SSL support
Package: inn2 Version: 2.5.2-1 Severity: important Tags: squeeze sid With the last package update, nnrpd-ssl was replaced by a symlink to nnrpd. nnrpd is, however, missing SSL support: $ /usr/lib/news/bin/nnrpd -S /usr/lib/news/bin/nnrpd: invalid option -- 'S' Usage error. Cheers, Benjamin -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages inn2 depends on: ii cron3.0pl1-111 process scheduling daemon ii inn2-inews 2.5.2-1 NNTP client news injector, from In ii libc6 2.10.2-8 Embedded GNU C Library: Shared lib ii libdb4.84.8.30-1 Berkeley v4.8 Database Libraries [ ii libmime-tools-perl 5.427-2 Perl5 modules for MIME-compliant m ii libpam0g1.1.1-3 Pluggable Authentication Modules l ii libperl5.10 5.10.1-12shared Perl library ii libsasl2-2 2.1.23.dfsg1-5 Cyrus SASL - authentication abstra ii perl5.10.1-12Larry Wall's Practical Extraction ii perl-base [perlapi-5.10 5.10.1-12minimal Perl system ii postfix [mail-transport 2.7.0-1 High-performance mail transport ag ii procps 1:3.2.8-9/proc file system utilities ii time1.7-23 The GNU time program for measuring ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime inn2 recommends no packages. Versions of packages inn2 suggests: ii gnupg 1.4.10-3 GNU privacy guard - a free PGP rep ii libcomerr2 1.41.11-1common error description library pn libgd-gd2-noxpm-perl (no description available) ii libkrb5-3 1.8.1+dfsg-2 MIT Kerberos runtime libraries ii wget1.12-2 retrieves files from the web -- Configuration Files: /etc/news/incoming.conf [Errno 13] Permission denied: u'/etc/news/incoming.conf' -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#573261: cryptsetup: change of default cipher breaks systems
Package: cryptsetup Version: 2:1.1.0~rc2-1 Severity: important With the plain default cipher change from 1.1.0~rc2-1 to 1.1.0-1, "starting" encrypted partitions with plain and default cipher will fail. The package should at least give a warning when such a setup is detected while upgrading. Moreover, the Debian changelog just says "changed default to ...". Naming the old default value would be extremely helpful. -- Package-specific info: -- /proc/cmdline BOOT_IMAGE=/vmlinuz-2.6.32-2-686 root=UUID=fd22fa0f-d09c-4828-8f01-e87d21e05601 ro vga=791 quiet -- /etc/crypttab # # swap /dev/sda3 /dev/urandomswap home/dev/sda5 noneloud -- /etc/fstab # /etc/fstab: static file system information. # # proc/proc proc defaults0 0 /dev/sda2 / xfs defaults,noatime0 1 /dev/sda1 /boot ext3 defaults,noatime0 2 /dev/sda3 noneswapsw 0 0 /dev/mapper/home/home xfs defaults0 2 /dev/hda/media/cdrom0 udf,iso9660 user,noauto 0 0 -- lsmod Module Size Used by tun 8728 0 nvidia 8783671 32 ppdev 4058 0 lp 5570 0 parport22554 2 ppdev,lp xt_multiport1775 1 vboxnetadp 5154 0 vboxnetflt 10202 0 vboxdrv 114333 2 vboxnetadp,vboxnetflt cpufreq_powersave602 0 cpufreq_conservative 4018 0 cpufreq_userspace 1444 0 cpufreq_stats 1940 0 uinput 4796 1 fuse 43554 1 aes_i5866816 2 aes_generic25738 1 aes_i586 cbc 2047 2 iptable_filter 1790 1 ip_tables 7690 1 iptable_filter x_tables8335 2 xt_multiport,ip_tables ext3 93828 1 jbd31965 1 ext3 mbcache 3762 1 ext3 acpi_cpufreq4907 0 firewire_sbp2 9575 0 loop9721 0 dm_crypt9059 2 dm_mod 45878 5 dm_crypt arc4 974 2 ecb 1405 2 snd_hda_codec_idt 35245 1 iwl394545717 0 joydev 6771 0 iwlcore67306 1 iwl3945 snd_hda_intel 16211 1 mac80211 122058 2 iwl3945,iwlcore snd_hda_codec 46002 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 4054 1 snd_hda_codec pcmcia 17442 0 i2c_i8016442 0 usb_storage29773 0 snd_pcm_oss28671 0 snd_mixer_oss 10461 1 snd_pcm_oss cdc_acm11463 0 snd_pcm47362 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi3576 0 snd_rawmidi12505 1 snd_seq_midi snd_seq_midi_event 3684 1 snd_seq_midi yenta_socket 16403 1 rsrc_nonstatic 7057 1 yenta_socket usbhid 27756 0 dell_laptop 1533 0 led_class 1757 2 iwl3945,iwlcore snd_seq35327 2 snd_seq_midi,snd_seq_midi_event hid50593 1 usbhid i2c_core 12612 2 nvidia,i2c_i801 wmi 3575 0 snd_timer 12258 2 snd_pcm,snd_seq snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq pcmcia_core20414 3 pcmcia,yenta_socket,rsrc_nonstatic evdev 5609 25 psmouse44381 0 serio_raw 2916 0 pcspkr 1207 0 dcdbas 3860 1 dell_laptop snd34327 13 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 86918 3 iwl3945,iwlcore,mac80211 soundcore 3450 1 snd snd_page_alloc 4977 2 snd_hda_intel,snd_pcm ac 1640 0 battery 3782 0 processor 25811 3 acpi_cpufreq rfkill 10196 3 dell_laptop,cfg80211 xfs 414276 3 exportfs2586 1 xfs sd_mod 25717 6 crc_t10dif 1012 1 sd_mod ide_cd_mod 21044 0 cdrom 26487 1 ide_cd_mod ata_generic 2015 0 uhci_hcd 15977 0 ide_pci_generic 1924 0 ahci 26590 5 intel_agp 20165 0 libata114180 2 at
Bug#528160: cherokee: Upgrade to 0.99.14-2 still fails silently
Package: cherokee Version: 0.99.14-2 Severity: normal I'm sorry, but the right-away fix doesn't seem to work for me. After upgrading from 0.99.14-1+b1 to 0.99.14-2, there is again no trailing newline in cherokee.conf, and the deamon again silently fails to start. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (x86_64) Kernel: Linux 2.6.29-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages cherokee depends on: ii libc6 2.9-12 GNU C Library: Shared libraries ii libcherokee-base0 0.99.14-2 Cherokee web server - Base librari ii libcherokee-config0 0.99.14-2 Cherokee web server - Configuratio ii libcherokee-mod-server-info 0.99.14-2 Cherokee web server - Server infor ii libcherokee-server0 0.99.14-2 Cherokee web server - Server libra ii libssl0.9.8 0.9.8g-16 SSL shared libraries ii logrotate 3.7.7-3Log rotation utility Versions of packages cherokee recommends: ii libcherokee-mod-admin 0.99.14-2 Cherokee web server - Administrati Versions of packages cherokee suggests: pn cherokee-doc (no description available) pn libcherokee-mod-geoip (no description available) pn libcherokee-mod-libssl (no description available) pn libcherokee-mod-streaming (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#528160: cherokee: Upgrade to 0.99.14-1+b1 fails silently
Package: cherokee Version: 0.99.14-1+b1 Severity: normal After upgrading to 0.99.14-1+b1, cherokee fails to start again, with error message rule_extensions.c:70: Rule prio=9 needs an 'extensions' property Couldn't read the config file: /etc/cherokee/cherokee.conf This error is however silently ignored by the startup script. Adding a trailing newline to the config file solves the problem. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (x86_64) Kernel: Linux 2.6.29-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages cherokee depends on: ii libc6 2.9-12 GNU C Library: Shared libraries ii libcherokee-base0 0.99.14-1+b1 Cherokee web server - Base librari ii libcherokee-config0 0.99.14-1+b1 Cherokee web server - Configuratio ii libcherokee-mod-server-info 0.99.14-1+b1 Cherokee web server - Server infor ii libcherokee-server0 0.99.14-1+b1 Cherokee web server - Server libra ii libssl0.9.8 0.9.8g-16SSL shared libraries ii logrotate 3.7.7-3 Log rotation utility Versions of packages cherokee recommends: ii libcherokee-mod-admin 0.99.14-1+b1 Cherokee web server - Administrati Versions of packages cherokee suggests: pn cherokee-doc (no description available) pn libcherokee-mod-geoip (no description available) pn libcherokee-mod-libssl (no description available) pn libcherokee-mod-streaming (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#524958: cherokee: Upgrade to 0.99.11-1 fails
Package: cherokee Version: 0.99.11-1 Severity: important Upgrading from 0.99.10-3 to 0.99.11-1 causes the server to silently not start afterwards. When invoking "cherokee" from command line, this is the error message: # cherokee rule_extensions.c:70: Rule prio=9 needs an 'extensions' property Couldn't read the config file: /etc/cherokee/cherokee.conf As with previous upgrades, purging the old package, then installing the new one solves the problem - but the need to do so is starting to get boring... -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-vserver-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages cherokee depends on: ii libc6 2.9-7 GNU C Library: Shared libraries ii libcherokee-base0 0.99.11-1 Cherokee web server - Base librari ii libcherokee-config0 0.99.11-1 Cherokee web server - Configuratio ii libcherokee-mod-server-info 0.99.11-1 Cherokee web server - Server infor ii libcherokee-server0 0.99.11-1 Cherokee web server - Server libra ii libssl0.9.8 0.9.8g-16 SSL shared libraries ii logrotate 3.7.7-3Log rotation utility Versions of packages cherokee recommends: ii libcherokee-mod-admin 0.99.11-1 Cherokee web server - Administrati Versions of packages cherokee suggests: pn cherokee-doc (no description available) pn libcherokee-mod-geoip (no description available) pn libcherokee-mod-libssl (no description available) pn libcherokee-mod-streaming (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#524129: cherokee 0.99.10-1 does not install
Package: cherokee Severity: normal cherokee 0.99.10-1 seems to first remove /etc/cherokee/cherokee.conf, and then try to access it: cat: /etc/cherokee/cherokee.conf: No such file or directory dpkg: error processing /var/cache/apt/archives/cherokee_0.99.10-1_i386.deb (--unpack): subprocess pre-installation script returned error exit status 1 (even if restoring the config file from backup before trying to install the package) -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-vserver-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages cherokee depends on: ii libc6 2.9-7 GNU C Library: Shared libraries pn libcherokee-base0 (no description available) ii libcherokee-config0 0.99.10-1 Cherokee web server - Configuratio pn libcherokee-mod-server-info(no description available) pn libcherokee-server0(no description available) ii libssl0.9.8 0.9.8g-16 SSL shared libraries ii logrotate 3.7.7-3Log rotation utility Versions of packages cherokee recommends: pn libcherokee-mod-admin (no description available) Versions of packages cherokee suggests: pn cherokee-doc (no description available) pn libcherokee-mod-geoip (no description available) pn libcherokee-mod-libssl (no description available) pn libcherokee-mod-streaming (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#521789: cryptsetup: starting non-luks partitions fails
Package: cryptsetup Version: 2:1.0.6-7 Severity: important Tags: patch Cryptsetup for non-luks devices calls udev's vol_id to check for existing file systems. udev 0.140-1, however, changed its return messages, so the check doesn't properly work. The new message should presumably be incorporated in /lib/cryptsetup/checks/un_vol_id: 23c23 < if [ "$vol_id" != "$dev: unknown volume type" ] && [ "$vol_id" != "minix" ] && [ -z "$fs" ] && [ "$vol_id" != "unknown or non-unique volume type (--probe-all lists possibly conflicting types)" ]; then --- > if [ "$vol_id" != "$dev: unknown volume type" ] && [ "$vol_id" != "minix" ] > && [ -z "$fs" ]; then Benjamin -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-vserver-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages cryptsetup depends on: ii dmsetup 2:1.02.30-3 The Linux Kernel Device Mapper use ii libc62.9-6 GNU C Library: Shared libraries ii libdevmapper1.02.1 2:1.02.30-3 The Linux Kernel Device Mapper use ii libpopt0 1.14-4 lib for parsing cmdline parameters ii libuuid1 1.41.3-1universally unique id library cryptsetup recommends no packages. Versions of packages cryptsetup suggests: pn dosfstools (no description available) ii initramfs-tools [linux-initra 0.93.1 tools for generating an initramfs ii udev 0.140-1/dev/ and hotplug management daemo -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#474139: libneon27-gnutls: Same problem again
Package: libneon27-gnutls Version: 0.28.2-2 Followup-For: Bug #474139 Hi, same problem on my box - when using svn, I get: [EMAIL PROTECTED]:~/am$ svn up svn: PROPFIND request failed on '/repo/hb/src/am/trunk' svn: PROPFIND of '/repo/hb/src/am/trunk': SSL negotiation failed: SSL error: Key usage violation in certificate has been detected. (https://***) Benjamin -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-vserver-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libneon27-gnutls depends on: ii libc6 2.7-11GNU C Library: Shared libraries ii libcomerr2 1.40.8-2 common error description library ii libgnutls262.2.5-1 the GNU TLS library - runtime libr ii libkrb53 1.6.dfsg.3-2 MIT Kerberos runtime libraries ii libxml22.6.32.dfsg-2 GNOME XML library ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages libneon27-gnutls recommends: ii ca-certificates 20080514 Common CA certificates -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#459529: icedove: All http links are opened in browser
Package: icedove Version: 2.0.0.9-2 Severity: normal Since updating from 2.0.0.9-1 to 2.0.0.9-2, _every_ http link is opened in the configured browser application, even rss feed articles (which should be shown in the message pane, as before) and plugin update pages (which shouldn't be shown at all). I believe this was introduced with the bug fix 452882. Benjamin -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-vserver-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages icedove depends on: ii debianutils 2.28.2 Miscellaneous utilities specific t ii fontconfig 2.5.0-2 generic font configuration library ii libatk1.0-0 1.20.0-1 The ATK accessibility toolkit ii libc6 2.7-5GNU C Library: Shared libraries ii libcairo2 1.4.12-2 The Cairo 2D vector graphics libra ii libfontconfig1 2.5.0-2 generic font configuration library ii libfreetype62.3.5-1+b1 FreeType 2 font engine, shared lib ii libgcc1 1:4.3-20080102-1 GCC support library ii libglib2.0-02.14.4-2 The GLib library of C routines ii libgtk2.0-0 2.12.3-2 The GTK+ graphical user interface ii libhunspell-1.1-0 1.1.9-1 spell checker and morphological an ii libjpeg62 6b-14The Independent JPEG Group's JPEG ii libnspr4-0d 4.7.0~1.9b1-2NetScape Portable Runtime Library ii libnss3-1d 3.12.0~1.9b1-2 Network Security Service libraries ii libpango1.0-0 1.18.3-1 Layout and rendering of internatio ii libstdc++6 4.3-20080102-1 The GNU Standard C++ Library v3 ii libx11-62:1.0.3-7X11 client-side library ii libxft2 2.1.12-2 FreeType-based font drawing librar ii libxinerama11:1.0.2-1X11 Xinerama extension library ii libxrender1 1:0.9.4-1X Rendering Extension client libra ii libxt6 1:1.0.5-3X11 toolkit intrinsics library ii psmisc 22.6-1 Utilities that use the proc filesy ii zlib1g 1:1.2.3.3.dfsg-8 compression library - runtime icedove recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#452882: #452882: "Bugfix" introduces new bug
Hi there, the changes introduced with icedove 2.0.0.9-2 in order to solve bug 452882 cause rss feed articles to be opened in the browser instead of the message pane - even without clicking the link, just selecting an article is sufficient. Benjamin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#448586: "No such file or directory" misleading
Hi, On 2007-10-30 09:36, [EMAIL PROTECTED] wrote: > This message made by several programs is misleading: > # ed /etc/fonts/conf.d/61-traditional.conf > /etc/fonts/conf.d/61-traditional.conf: No such file or directory I don't agree. > # ls /etc/fonts/conf.d/61-traditional.conf > ls: /etc/fonts/conf.d/61-traditional.conf: No such file or directory > It should be just "no such file" as indeed there is such a directory: There is a directory named "/etc/fonts/conf.d/61-traditional.conf"? I don't think so, at least not on your system, according to the above. Background: Since there is no "61-traditional.conf" in /etc/fonts/conf.d, who can tell whether that should be a file or a directory (or a pipe, or a socket, or a device, or whatever else)? Thus the general message. Benjamin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#445779: changing environment language helps a little
Package: rdesktop Version: 1.5.0-2+cvs20071006 Followup-For: Bug #445779 Indeed, setting LANG=C allows me to start rdesktop, and exactly as you're describing, by hitting the enter key, it crashes again. Benjamin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#445779: rdesktop: Segfaults on startup
Package: rdesktop
Version: 1.5.0-2+cvs20071006
Severity: grave
Justification: renders package unusable
When trying to connect to any machine (rdesktop -g 1280x1024 host), I
get a segfault.
Here's the last few lines from strace:
access("/usr/share/X11/locale/en_US.UTF-8/XLC_LOCALE", R_OK) = 0
open("/usr/share/X11/locale/en_US.UTF-8/XLC_LOCALE", O_RDONLY) = 6
fstat64(6, {st_mode=S_IFREG|0644, st_size=2036, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb7f3c000
read(6, "# $XFree86: xc/nls/XLC_LOCALE/e"..., 4096) = 2036
read(6, "", 4096) = 0
close(6)= 0
munmap(0xb7f3c000, 4096)= 0
read(5, "lstate\n\nKP_2 0x50 numlock\nKP_Dow"..., 4096) = 418
read(5, "", 4096) = 0
close(5)= 0
munmap(0xb7f3d000, 4096)= 0
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
Benjamin
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-2-vserver-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages rdesktop depends on:
ii libc6 2.6.1-5GNU C Library: Shared libraries
ii libssl0.9.8 0.9.8e-9 SSL shared libraries
ii libx11-6 2:1.0.3-7 X11 client-side library
rdesktop recommends no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#430921: nvidia-kernel-source: Module fails to load on 2.6.21
Package: nvidia-kernel-source Version: 100.14.09-1 Severity: grave Justification: renders package unusable I can not load the nvidia kernel module (built using module-assistant) on 2.6.21 kernels. All I get is the following error message: nvidia: disagrees about version of symbol struct_module FATAL: Error inserting nvidia (/lib/modules/2.6.21-2-vserver-686/nvidia/nvidia.ko): Invalid module format Benjamin -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (300, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21-2-vserver-686 (SMP w/1 CPU core) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages nvidia-kernel-source depends on: ii debhelper 5.0.50 helper programs for debian/rules ii dpatch2.0.26 patch maintenance system for Debia ii make 3.81-3 The GNU version of the "make" util ii sed 4.1.5-2The GNU sed stream editor Versions of packages nvidia-kernel-source recommends: ii devscripts 2.10.5 Scripts to make the life of a Debi ii kernel-package 11.001 A utility for building Linux kerne ii nvidia-glx 100.14.09-1 NVIDIA binary Xorg driver -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#425808: liblber: Assertion failed
Package: libldap2 Version: 2.1.30-13.3 Severity: grave Justification: renders package unusable We're using libldap2 in combination with kerberos for AD authentication and authorization. Often, login, id lookups and samba fail due to an assertion failure in liblber. Here's the output of a failed call to id: $ id id: /tmp/buildd/openldap2-2.1.30/libraries/liblber/sockbuf.c:82: ber_sockbuf_ctrl: Assertion `( (sb)->sb_opts.lbo_valid == 0x3 )' failed. uid=1055() gid=12000(foobar)Aborted Samba crashes, the panic action script comes up with a stack trace: 0xb7be58be in waitpid () from /lib/tls/libc.so.6 #0 0xb7be58be in waitpid () from /lib/tls/libc.so.6 #1 0xb7b8d699 in strtold_l () from /lib/tls/libc.so.6 #2 0xb7d1e56d in system () from /lib/tls/libpthread.so.0 #3 0x0822c07a in smb_panic () #4 0x0821a49a in dump_core_setup () #5 #6 0xb7b80947 in raise () from /lib/tls/libc.so.6 #7 0xb7b820c9 in abort () from /lib/tls/libc.so.6 #8 0xb7b7a05f in __assert_fail () from /lib/tls/libc.so.6 #9 0xb7eb9622 in ber_sockbuf_ctrl () from /usr/lib/liblber.so.2 #10 0xb7ec950f in ldap_msgdelete () from /usr/lib/libldap_r.so.2 #11 0xb7eca4b3 in ldap_result () from /usr/lib/libldap_r.so.2 #12 0xb775aed0 in ?? () from /lib/libnss_ldap.so.2 If we should provide further information useful to solve this issue, feel free to contact me. Regards, Benjamin -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages libldap2 depends on: ii libc6 2.3.6.ds1-13 GNU C Library: Shared libraries ii libgnutls13 1.4.4-3the GNU TLS library - runtime libr ii libsasl2-22.1.22.dfsg1-8 Authentication abstraction library libldap2 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#422052: libldap2: Assertion failure in ber_sockbuf_ctrl
Package: libldap2 Version: 2.1.30-13.4 Severity: important I'm using ldap/kerberos to provide a single sing on solution in a small network consistingof Linux and Windows machines. However, there seems to be a bug in liblber preventing me as non-root to issue the "id" command on some accounts (not on all accounts however), and samba keeps crashing every now and then, providing the following stack trace: 0xb7be58be in waitpid () from /lib/tls/libc.so.6 #0 0xb7be58be in waitpid () from /lib/tls/libc.so.6 #1 0xb7b8d699 in strtold_l () from /lib/tls/libc.so.6 #2 0xb7d1e56d in system () from /lib/tls/libpthread.so.0 #3 0x0822c07a in smb_panic () #4 0x0821a49a in dump_core_setup () #5 #6 0xb7b80947 in raise () from /lib/tls/libc.so.6 #7 0xb7b820c9 in abort () from /lib/tls/libc.so.6 #8 0xb7b7a05f in __assert_fail () from /lib/tls/libc.so.6 #9 0xb7eb9622 in ber_sockbuf_ctrl () from /usr/lib/liblber.so.2 #10 0xb7ec950f in ldap_msgdelete () from /usr/lib/libldap_r.so.2 #11 0xb7eca4b3 in ldap_result () from /usr/lib/libldap_r.so.2 #12 0xb775aed0 in ?? () from /lib/libnss_ldap.so.2 #13 0x083ed0b8 in ?? () #14 0x004d in ?? () #15 0x in ?? () Cheers, Benjamin -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages libldap2 depends on: ii libc6 2.3.6.ds1-13 GNU C Library: Shared libraries ii libgnutls13 1.4.4-3the GNU TLS library - runtime libr ii libsasl2-22.1.22.dfsg1-8 Authentication abstraction library libldap2 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#410879: xserver-xorg-core: Dual-screen problem
On 2007-02-23 03:12, David Nusinow wrote: > Can you add the linke 'Load "vm86"' to your modules section and let us know > if that works? Tried that, with as well as without the int10 module. It's always the same result as if I hadn't loaded none of these two modules. Benjamin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#410879: xserver-xorg-core: Dual-screen problem
Hi Julien, On 2007-02-20 07:35, Julien Cristau wrote: > uh, read the bug, please, this is a regression introduced by the int10 > patch in 2:1.1.1-17, so we might want to fix it. > > Benjamin, could you try commenting this line in your xorg.conf: > Option "UseInt10Module""True" > and tell us whether that fixes it? thanks for this suggestion. If I remove that line, I'm able to start the X server using xserver-xorg-core 2:1.1.1-18, but not with 2:2.1.0-3. However, what I get is not one screen next to the other as before, but a cloned output (except for the mouse pointer, which is visible only on one of the screens). Best regards, Benjamin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#410879: xserver-xorg-core: Dual-screen problem
Package: xserver-xorg-core Version: 2:1.1.1-17 Severity: important Ever since the update of xserver-xorg-core from 2:1.1.1-16 to 2:1.1.1-17, my xinerama configuration with two monitors fails to start claiming two unavaialble modules, event and wfb (which is a sub-module of the nvidia video driver, and is available at /usr/lib/xorg/modules/libnvidia-wfb.so.1.0.9746). I've also tried to go to 2:1.2.0-2 (experimental), but that didn't change anything. Benjamin -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /etc/X11/X target unchanged from checksum in /var/lib/x11/X.md5sum. X server symlink status: lrwxrwxrwx 1 root root 13 2006-08-10 13:52 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1597708 2007-02-10 21:27 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: nVidia Corporation NV34M [GeForce FX Go5200] (rev a1) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 3603 2007-02-14 08:34 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (Xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom # md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum # dpkg-reconfigure xserver-xorg Section "ServerLayout" Identifier "Default Layout" Screen "BuiltinScreen" Screen 0 "BuiltinScreen" 0 0 Screen 1 "ExternalScreen" RightOf "BuiltinScreen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "Files" FontPath"unix/:7100" FontPath"unix/:7101" EndSection Section "Module" Load"bitmap" Load"dbe" Load"ddc" Load"extmod" Load"freetype" Load"glx" Load"int10" Load"record" Load"type1" Load"vbe" EndSection Section "ServerFlags" Option "Standby Time" "20" Option "Suspend Time" "30" Option "Off Time" "45" Option "Xinerama" "1" EndSection # built-in keyboard Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant""nodeadkeys" Option "XkbOptions""compose:caps" Option "XkbOptions""mod4:lwin" EndSection # external mouse Section "InputDevice" Identifier "Configured Mouse" Driver "event" Option "Device" "/dev/input/by-id/usb-Logitec_Optical_USB_Mouse-event-mouse" Option "Protocol" "ImPS/2" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "nv_internal" Driver "nvidia" BusID "PCI:1:0:0" Screen 0 Option "NvAGP" "1" Option "NoLogo""true" Option "CursorShadow" "true" Option "RenderAccel" "true" Option "TripleBuffer" "true" EndSection Section "Device" Identifier "nv_external" Driver "nvidia" BusID "PCI:1:0:0" Screen 1 Option "NvAGP" "1" Option "NoLogo""true" Option "CursorShadow" "true" Option "RenderAccel" "true" Option "TripleBuffer" "true" EndSection Section "Monitor" Identifier "Built-In Display" Vendorname "Dell" ModelName "Dell 1680x1050 Laptop Display" HorizSync 31.5-90.0 VertRefresh 59.0-85.0 ModeLine"1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 Option "DPMS" Option "RenderAccel" EndSection Section "Monitor" Identifier "ExternalMonitor" HorizSync 31.5-90.0 VertRefresh 59.0-85.0 ModeLine"1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 Option
Bug#358752: linux-image-2.6.16-1-vserver-686: sendfile() does not work
Package: linux-image-2.6.16-1-vserver-686 Version: 2.6.16-2 Severity: normal The sendfile() system call returns with a return value signalling success (it returns the number of bytes it was requested to copy), but no data is actually copied to the destination. I recognized the same problem also in linux-image-2.6.16-1-vserver-k7, but it seems to work fine in linux-image-2.6.16-1-k7. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (300, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-vserver-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages linux-image-2.6.16-1-vserver-686 depends on: ii module-init-tools 3.2.2-2tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.12-8 Yet Another mkInitRD Versions of packages linux-image-2.6.16-1-vserver-686 recommends: ii libc6-i6862.3.6-4GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.16-1-vserver-686/postinst/depmod-error-initrd-2.6.16-1-vserver-686: false linux-image-2.6.16-1-vserver-686/preinst/initrd-2.6.16-1-vserver-686: linux-image-2.6.16-1-vserver-686/preinst/lilo-initrd-2.6.16-1-vserver-686: true linux-image-2.6.16-1-vserver-686/postinst/kimage-is-a-directory: linux-image-2.6.16-1-vserver-686/postinst/old-dir-initrd-link-2.6.16-1-vserver-686: true linux-image-2.6.16-1-vserver-686/postinst/depmod-error-2.6.16-1-vserver-686: false * linux-image-2.6.16-1-vserver-686/preinst/already-running-this-2.6.16-1-vserver-686: linux-image-2.6.16-1-vserver-686/prerm/would-invalidate-boot-loader-2.6.16-1-vserver-686: true linux-image-2.6.16-1-vserver-686/postinst/bootloader-test-error-2.6.16-1-vserver-686: linux-image-2.6.16-1-vserver-686/preinst/elilo-initrd-2.6.16-1-vserver-686: true linux-image-2.6.16-1-vserver-686/preinst/abort-install-2.6.16-1-vserver-686: linux-image-2.6.16-1-vserver-686/preinst/failed-to-move-modules-2.6.16-1-vserver-686: * linux-image-2.6.16-1-vserver-686/preinst/overwriting-modules-2.6.16-1-vserver-686: false linux-image-2.6.16-1-vserver-686/postinst/old-system-map-link-2.6.16-1-vserver-686: true linux-image-2.6.16-1-vserver-686/preinst/bootloader-initrd-2.6.16-1-vserver-686: true linux-image-2.6.16-1-vserver-686/postinst/create-kimage-link-2.6.16-1-vserver-686: true linux-image-2.6.16-1-vserver-686/postinst/bootloader-error-2.6.16-1-vserver-686: linux-image-2.6.16-1-vserver-686/preinst/abort-overwrite-2.6.16-1-vserver-686: linux-image-2.6.16-1-vserver-686/preinst/lilo-has-ramdisk: linux-image-2.6.16-1-vserver-686/postinst/old-initrd-link-2.6.16-1-vserver-686: true linux-image-2.6.16-1-vserver-686/prerm/removing-running-kernel-2.6.16-1-vserver-686: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
