Bug#1028155: systemd-networkd resolves issue

[LeJacq, Jean Pierre]

The core issue is that the nginx is starting before the IPv6 address is bound.

systemd-networkd has a specific service, systemd-networkd-wait-online.service, 
that will force all online services to wait until the network interfaces are 
configured.

After switching to systemd-networkd from ifupdown, nginx now comes up 
reliably.

I'm not sure if this is a bug in nginx. It may be worth an addition to the 
documentation about this potential issue.

-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#1032399: linux-image-6.0.0-0.deb11.6-amd64: Please provide think-lmi.ko module.

[LeJacq, Jean Pierre]

Package: src:linux
Version: 6.0.12-1~bpo11+1
Severity: wishlist

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
   * What was the outcome of this action?
   * What outcome did you expect instead?

*** End of the template - remove these template lines ***


-- Package-specific info:
** Version:
Linux version 6.0.0-0.deb11.6-amd64 (debian-ker...@lists.debian.org) (gcc-10 
(Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 
SMP PREEMPT_DYNAMIC Debian 6.0.12-1~bpo11+1 (2022-12-19)

** Command line:
BOOT_IMAGE=/@/vmlinuz-6.0.0-0.deb11.6-amd64 
root=UUID=ce14d94e-5f4c-4b1e-9ba7-1f39243a40de ro rootflags=subvol=@ quiet

** Tainted: O (4096)
 * externally-built ("out-of-tree") module was loaded

** Kernel log:
[   39.729511] sof-audio-pci-intel-cnl :00:1f.3: firmware: direct-loading 
firmware intel/sof-tplg/sof-hda-generic-4ch.tplg
[   39.729517] sof-audio-pci-intel-cnl :00:1f.3: Topology: ABI 3:18:1 
Kernel ABI 3:23:0
[   39.729740] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not 
yet available, widget card binding deferred
[   39.812365] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC285: 
line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[   39.812368] snd_hda_codec_realtek ehdaudio0D0:speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[   39.812369] snd_hda_codec_realtek ehdaudio0D0:hp_outs=1 
(0x21/0x0/0x0/0x0/0x0)
[   39.812370] snd_hda_codec_realtek ehdaudio0D0:mono: mono_out=0x0
[   39.812371] snd_hda_codec_realtek ehdaudio0D0:inputs:
[   39.812372] snd_hda_codec_realtek ehdaudio0D0:  Mic=0x19
[   39.947121] systemd-journald[971]: Received client request to flush runtime 
journal.
[   39.988802] audit: type=1400 audit(1678077048.865:2): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="lsb_release" pid=1311 
comm="apparmor_parser"
[   39.989068] audit: type=1400 audit(1678077048.865:3): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1313 
comm="apparmor_parser"
[   39.989073] audit: type=1400 audit(1678077048.865:4): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="man_filter" pid=1313 
comm="apparmor_parser"
[   39.989075] audit: type=1400 audit(1678077048.865:5): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="man_groff" pid=1313 
comm="apparmor_parser"
[   39.989142] audit: type=1400 audit(1678077048.865:6): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1312 
comm="apparmor_parser"
[   39.989145] audit: type=1400 audit(1678077048.865:7): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" 
pid=1312 comm="apparmor_parser"
[   39.990052] audit: type=1400 audit(1678077048.869:8): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="libreoffice-oosplash" 
pid=1321 
comm="apparmor_parser"
[   39.990538] audit: type=1400 audit(1678077048.869:9): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" 
pid=1314 
comm="apparmor_parser"
[   39.990709] audit: type=1400 audit(1678077048.869:10): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=1316 
comm="apparmor_parser"
[   39.991069] audit: type=1400 audit(1678077048.869:11): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=1317 
comm="apparmor_parser"
[   40.315240] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   40.315244] Bluetooth: BNEP filters: protocol multicast
[   40.315249] Bluetooth: BNEP socket layer initialized
[   40.412458] loop: module loaded
[   40.412836] loop0: detected capacity change from 0 to 8
[   40.484966] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   40.523267] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX 
overwritten
[   40.523273] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX 
overwritten
[   40.523387] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 
overwritten
[   40.523391] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 
overwritten
[   40.523394] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 
overwritten
[   40.523397] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget 
Codec Output Pin1 overwritten
[   40.523400] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget 
Codec Input Pin1 overwritten
[   40.523404] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget 
Analog Codec Playback overwritten
[   40.523408] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget 
Digital Codec Playback overwritten
[   40.523412] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt 
Analog Codec Playback overwritten
[   40.523416] skl_hda_dsp_generic skl_hda_d

Bug#1028155: nginx now starting

[LeJacq, Jean Pierre]

On Thursday, January 19, 2023 7:11:49 AM EST LeJacq, Jean Pierre wrote

This problem reoccurred after updates to my system, none related to nginx.

It appears to be an ordering or race condition in the startup scripts.

thanks

-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#1028155: nginx now starting

[LeJacq, Jean Pierre]

Tags: fixed ipv6

While nginx has not changed and I have not changed my nginx configuration, 
nginx now comes up successfully on reboot.

thanks

-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#1028155: nginx-common: nginx fails to start on reboot when IPv6 enabled.

[LeJacq, Jean Pierre]

Package: nginx-common
Version: 1.22.1-5
Severity: normal

Dear Maintainer,

* What led up to the situation?

I have a dual IPv4/IPv6 server with nginx listening on both with the following 
directive:

server
  {
server_name "example.org";
listen 144.202.24.41:443 default_server ssl http2;
listen [2001:19f0:5401:58:5400:3ff:fe59:e2b1]:443 default_server ssl http2;

...
  }

When I reboot the server and login, systemctl report the following:

$ systemctl status nginx.service 
× nginx.service - A high performance web server and a reverse proxy server
 Loaded: loaded (/lib/systemd/system/nginx.service; enabled; preset: 
enabled)
 Active: failed (Result: exit-code) since Sat 2023-01-07 16:17:40 EST; 50s 
ago
   Docs: man:nginx(8)
Process: 481 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; 
master_process on; (code=exited, status=1/FAILURE)
CPU: 49ms

Jan 07 16:17:40 lj01 systemd[1]: Starting A high performance web server and a 
reverse proxy server...
Jan 07 16:17:40 lj01 nginx[481]: nginx: [emerg] bind() to 
[2001:19f0:5401:58:5400:3ff:fe59:e2b1]:443 failed (99: Cannot assign requested 
address)
Jan 07 16:17:40 lj01 nginx[481]: nginx: configuration file 
/etc/nginx/nginx.conf test failed
Jan 07 16:17:40 lj01 systemd[1]: nginx.service: Control process exited, 
code=exited, status=1/FAILURE
Jan 07 16:17:40 lj01 systemd[1]: nginx.service: Failed with result 'exit-code'.
Jan 07 16:17:40 lj01 systemd[1]: Failed to start A high performance web server 
and a reverse proxy server.

* What exactly did you do (or not do) that was effective (or
   ineffective)?

Restarting the nginx service resolves the issue.

This appears to be a dependency issue in the nginx.service file.

-- System Information:
Debian Release: 11.4 (Qinux 3.2)
  APT prefers stable-security
  APT policy: (1000, 'stable-security'), (1000, 'stable'), (500, 
'stable-updates'), (100, 'bullseye-fasttrack'), (100, 
'bullseye-backports-staging'), (100, 'unstable'), (10, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-0.deb11.6-amd64 (SMP w/12 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Thank you for using reportbug

-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#1028153: libnginx-mod-http-brotli-static: "brotli_static on;" causes "Vary: Accept-Encoding" to be added to every file (including images)

[LeJacq, Jean Pierre]

Package: libnginx-mod-http-brotli-static
Version: 1.0.0~rc-1+b1
Severity: normal

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?

Installed package and enabled following configuration.

brotli_static on;

# brotli off;
# brotli_types
#   application/xhtml+xml
#   application/xml
#   image/svg+xml
#   text/css
#   text/javascript
#   text/plain
#   ;

   * What was the outcome of this action?

brotli compressed files properly served with the header Vary: Accept-Encoding". 
However, all other files that are not compressed also have this header set with 
the same value.

   * What outcome did you expect instead?

Module should only set Vary for brotli compressed files.

This is a known issue:

https://github.com/google/ngx_brotli/issues/97

And there is patch available:

https://github.com/google/ngx_brotli/pull/98

Please consider applying to the Debian release. Without this fix, the module is 
essentially useless.

-- System Information:
Debian Release: 11.4 (Qinux 3.2)
  APT prefers stable-security
  APT policy: (1000, 'stable-security'), (1000, 'stable'), (500, 'stable-
updates'), (100, 'bullseye-fasttrack'), (100, 'bullseye-backports-staging'), 
(100, 'unstable'), (10, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-0.deb11.6-amd64 (SMP w/12 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not 
set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#1028144: nginx-commmon: Add additional entries for video types to mime.types.

[LeJacq, Jean Pierre]

Package: nginx-commmon
Version: 1.22.1-5
Severity: wishlist

Dear Maintainer,

The attached patch file adds entries for ogv amd mkv video types, both popular 
open source video formats used commonly on the web.

-- System Information:
Debian Release: 11.4 (Qinux 3.2)
  APT prefers stable-security
  APT policy: (1000, 'stable-security'), (1000, 'stable'), (500, 'stable-
updates'), (100, 'bullseye-fasttrack'), (100, 'bullseye-backports-staging'), 
(100, 'unstable'), (10, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-0.deb11.6-amd64 (SMP w/12 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not 
set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

-- 
JP
diff --git a/src/etc/nginx/mime.types b/src/etc/nginx/mime.types
index 692b16c..0702420 100644
--- a/src/etc/nginx/mime.types
+++ b/src/etc/nginx/mime.types
@@ -85,10 +85,12 @@ types {
 video/mp2tts;
 video/mp4 mp4;
 video/mpegmpeg mpg;
+video/ogg ogv;
 video/quicktime   mov;
 video/webmwebm;
 video/x-flv   flv;
 video/x-m4v   m4v;
+video/x-matroska  mkv
 video/x-mng   mng;
 video/x-ms-asfasx asf;
 video/x-ms-wmvwmv;


signature.asc
Description: This is a digitally signed message part.

Bug#1023603: virtualbox-dkms: virtualbox dkms fails to build with vmlinuz-5.19.0-0.deb11.2-amd64

[LeJacq, Jean Pierre]

Package: virtualbox-dkms
Version: 6.1.40-dfsg-1~fto11+1
Severity: normal

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?

I am trying to build the virtualbox modules for kernel  5.19.0-0.deb11.2-amd64


   * What exactly did you do (or not do) that was effective (or
 ineffective)?

$ sudo dpkg-reconfigure virtualbox-dkms Insert authentication card for user 
`jplejacq'
Trying authentication as user `jplejacq'...

--
Deleting module version: 6.1.40
completely from the DKMS tree.
--
Done.
Loading new virtualbox-6.1.40 DKMS files...
Building for 5.19.0-0.deb11.2-amd64
Module build for kernel 5.19.0-0.deb11.2-amd64 was skipped since the
kernel headers for this kernel does not seem to be installed.
Job for virtualbox.service failed because the control process exited with 
error code.
See "systemctl status virtualbox.service" and "journalctl -xeu 
virtualbox.service" for details.
invoke-rc.d: initscript virtualbox, action "restart" failed.
× virtualbox.service - LSB: VirtualBox Linux kernel module
 Loaded: loaded (/etc/init.d/virtualbox; generated)
 Active: failed (Result: exit-code) since Mon 2022-11-07 08:16:01 EST; 7ms 
ago
   Docs: man:systemd-sysv-generator(8)
Process: 8607 ExecStart=/etc/init.d/virtualbox start (code=exited, 
status=1/FAILURE)
CPU: 45ms

Nov 07 08:16:01 qipf1y4mle systemd[1]: Starting LSB: VirtualBox Linux kernel 
module...
Nov 07 08:16:01 qipf1y4mle virtualbox[8607]: Loading VirtualBox kernel 
modules...No suitable module for running kernel found ...
Nov 07 08:16:01 qipf1y4mle virtualbox[8616]:  failed!
Nov 07 08:16:01 qipf1y4mle virtualbox[8617]:  failed!
Nov 07 08:16:01 qipf1y4mle systemd[1]: virtualbox.service: Control process 
exited, code=exited, status=1/FAILURE
Nov 07 08:16:01 qipf1y4mle systemd[1]: virtualbox.service: Failed with result 
'exit-code'.
Nov 07 08:16:01 qipf1y4mle systemd[1]: Failed to start LSB: VirtualBox Linux 
kernel module.

   * What was the outcome of this action?

Failed to build due to missing header files. I do have the installed the two 
header packages for this kernle.

$ apt-cache policy linux-headers-5.19.0-0.deb11.2-amd64 linux-
headers-5.19.0-0.deb11.2-common
linux-headers-5.19.0-0.deb11.2-amd64:
  Installed: 5.19.11-1~bpo11+1
  Candidate: 5.19.11-1~bpo11+1
  Version table:
 *** 5.19.11-1~bpo11+1 1100
   1100 https://mirrors.edge.kernel.org/debian bullseye-backports/main 
amd64 Packages
100 /var/lib/dpkg/status
linux-headers-5.19.0-0.deb11.2-common:
  Installed: 5.19.11-1~bpo11+1
  Candidate: 5.19.11-1~bpo11+1
  Version table:
 *** 5.19.11-1~bpo11+1 1100
   1100 https://mirrors.edge.kernel.org/debian bullseye-backports/main 
amd64 Packages
100 /var/lib/dpkg/status

   * What outcome did you expect instead?

Modules built.

*** End of the template - remove these template lines ***


-- System Information:
Debian Release: 11.4 (Qinux 3.2)
  APT prefers stable-security
  APT policy: (1000, 'stable-security'), (1000, 'stable'), (500, 'stable-
updates'), (100, 'bullseye-fasttrack'), (100, 'bullseye-backports-staging'), 
(100, 'unstable'), (10, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 5.19.0-0.deb11.2-amd64 (SMP w/12 CPU threads; PREEMPT)
Kernel taint flags: TAINT_WARN
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not 
set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages virtualbox-dkms depends on:
ii  dkms  2.8.4-3

Versions of packages virtualbox-dkms recommends:
ii  virtualbox  6.1.40-dfsg-1~fto11+1

virtualbox-dkms suggests no packages.

-- no debconf information

Bug#980982: New upstream version 2.0.18

[LeJacq, Jean Pierre]

Hello Javier,

There has been several releases of flawfinder,  Version 2.01.8 released 
2021-06-25 is the latest at the time of this report.

-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#888222: systemd: invalid mount order of btrfs subvolumes after apt upgrade and reboot

[LeJacq, Jean Pierre]

On Saturday, March 9, 2019 6:10:16 PM EDT Michael Biebl wrote:
> Control: tags -1 + moreinfo
> 
> On Fri, 16 Nov 2018 00:52:56 +0100 Michael Biebl  wrote:
> > Hi
> > 
> > On Tue, 23 Jan 2018 19:39:29 -0500 "LeJacq, Jean Pierre"
> > 
> >  wrote:
> > > Package: systemd
> > > Version: 236-3~bpo9+1
> 
> This version is rather old, could you please try with v241 and report back
> 

Hi Michael,

I can confirm that this is no longer an issue with the version in testing:

$ apt-cache policy systemd
systemd:
  Installed: 241-1
  Candidate: 241-1
  Version table:
 *** 241-1 500
500 http://ftp.us.debian.org/debian buster/main amd64 Packages
  2 http://ftp.us.debian.org/debian unstable/main amd64 Packages
100 /var/lib/dpkg/status

I suggest that this bug can be closed.

Thanks for supporting this package.

-- 
JP

Bug#922049: #include

[LeJacq, Jean Pierre]

Dear Maintainer,

I've isolated where this is failing when using ed25519 keys.

The call to gcry_pk_verify() in the function challenge_verify_sexp() in the 
file src/util/support.c fails with the error value 1677782. I believe the 
issue is related to the hard-coding of the s-expression for the signature in 
this line:

err = gcry_sexp_build (&sexp_signature, NULL, "(sig-val (rsa (s %m)))",
   mpi_signature);

I believe it needs to be generalized to support alternate signature 
algorithms. For example, ed25519 requires the following s-expression:

   "(sig-val (ecdsa (r %?) (s %?)))";

The ECDSA signature is formed from two non-negative integers. I don't 
understand the crypto well enough to map these to the RSA signature values.

If the maintainer could provide some pointers I may be able to provide a 
patch.

-- 
JP

Bug#730048: kmail does not properly quote From field when replying

[LeJacq, Jean Pierre]

Here's an update for kmail in buster which is at the following version:

$ apt-cache policy kmail
kmail:
  Installed: 4:18.08.1-1
  Candidate: 4:18.08.1-1
  Version table:
 *** 4:18.08.1-1 500
500 http://ftp.us.debian.org/debian buster/main amd64 Packages
  2 http://ftp.us.debian.org/debian unstable/main amd64 Packages
100 /var/lib/dpkg/status

The bug continues to exist. Unfortunately, the option to make the identity 
sticky is gone rendering my workaround unusable.

-- 
JP

Bug#893914: libcgicc3: Add contrib/FCgiIO functionality

[LeJacq, Jean Pierre]

Package: libcgicc3
Version: 3.2.16-0.1
Severity: wishlist

Dear Maintainer,

Many users of libcgicc require the FastCGI interface. The upstream
source provides this in the contrib directory. It is relatively simple
to enable this with minimal overhead added to users that only require
CGI.

-- System Information:
Debian Release: 9.4
  APT prefers stable
  APT policy: (1000, 'stable'), (500, 'stable-updates'), (2, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.15.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US 
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages libcgicc3 depends on:
ii  libc6   2.24-11+deb9u3
ii  libgcc1 1:6.3.0-18+deb9u1
ii  libstdc++6  6.3.0-18+deb9u1

libcgicc3 recommends no packages.

libcgicc3 suggests no packages.

-- no debconf information

Bug#887304: linux-image-4.14.0-0.bpo.2-amd64: Error crypto/algapi.c:348 and a long system boot.

[LeJacq, Jean Pierre]

I've tested the following two kernels from sid on a stretch system and they 
both DO NOT exhibit this bug:

linux-image-4.15.0-1-amd64
linux-image-4.15.0-2-amd64

Instead of the kernel null pointer exception, I see the following in the boot 
log:

kernel: usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
kernel: usb 1-7: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
kernel: alg: ecdh: test failed on vector 3, err=-14
kernel: Bluetooth: Core ver 2.22

My bluetooth devices now work while they didn't with the 4.14.0 kernels.

-- 
JP

Bug#887304: linux-image-4.14.0-0.bpo.2-amd64: Error crypto/algapi.c:348 and a long system boot.

[LeJacq, Jean Pierre]

Package: src:linux
Followup-For: Bug #887304

Dear Maintainer,

This issue exists in the latest version, linux-image-4.14.0-0.bpo.3-amd64, as 
well.

-- System Information:
Debian Release: 9.4
  APT prefers stable
  APT policy: (1000, 'stable'), (500, 'stable-updates'), (2, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.14.0-0.bpo.3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US 
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

-- 
JP

Bug#870443: ITP: cjson -- Ultralightweight JSON parser in ANSI C

[LeJacq, Jean Pierre]

Hi Yanhoo,

I wanted to check on the status of this bug.

We've packaged cJSON (1.5.9) for an internal project and are willing to either 
maintain this ourselves or provide you and the collab-maint team with our 
packaging.

-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#807676: [gnupg2] Update to 2.1.10 break hidden-encrypt-to with groups

[LeJacq, Jean Pierre]

Package: gnupg2
Version: 2.1.10-1
Severity: normal

--- Please enter the report below this line. ---

Decryption fails if the group mechanism is used by the sender when encrypting 
when \ a users ~/.gnupg/gpg.conf file with the hidden-encrypt-to option.

group mygr...@acme.org=0x 0x
hidden-encrypt-to mygr...@acme.org

This worked for the 2.0.x and version 2.1.9 and below.


--- System information. ---
Architecture: amd64
Kernel:   Linux 4.3.0-trunk-amd64

Debian Release: stretch/sid
  800 unstableftp.us.debian.org 
  500 testing ftp.us.debian.org 
  500 stable  dl.google.com 
  100 experimentalftp.us.debian.org 

--- Package information. ---
Depends(Version) | Installed
-+-=
gnupg-agent (= 2.0.26-1) | 2.1.10-1
libassuan0(>= 2.0.1) | 2.4.2-1
libbz2-1.0   | 1.0.6-8
libc6  (>= 2.15) | 
libcurl3-gnutls  (>= 7.16.2) | 
libgcrypt20   (>= 1.6.1) | 
libgpg-error0  (>= 1.10) | 
libksba8  (>= 1.2.0) | 
libreadline6(>= 6.0) | 
zlib1g  (>= 1:1.1.4) | 
dpkg(>= 1.15.4)  | 
 OR install-info | 


Recommends (Version) | Installed
-+-===
libldap-2.4-2 (>= 2.4.7) | 2.4.42+dfsg-2


Suggests(Version) | Installed
=-+-===
gnupg-doc | 
parcimonie| 
xloadimage| 

-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#794237: openconnect: Does not work with network-manager 1.0.4

[LeJacq, Jean Pierre]

On Tue, 01 Sep 2015 14:24:25 -0400 "LeJacq, Jean Pierre" "LeJacq, Jean 
"LeJacq, Jean Pierre"  wrote:
> On Fri, 7 Aug 2015 19:13:15 -0400 Mike Miller  wrote:
> > Control: reassign -1 network-manager 1.0.4-1
> > Control: retitle -1 network-manager: sets VPN tunnel MTU incorrectly
> > 
> > On Fri, Aug 07, 2015 at 22:31:44 +0300, Matti Koskimies wrote:
> > > On Fri, 2015-08-07 at 09:19 -0400, Mike Miller wrote:
> > > > On Fri, Aug 7, 2015 at 13:53:49 +0100, David Woodhouse wrote:
> > > > > I blame NM.
> > > > 
> > > > Fair enough. Matt already said that reverting to NM 1.0.2 was enough
> > > > to restore his connection, but that was while running openconnect
> > > > standalone. Matt, can you verify that going back to NM 1.0.2 and
> > > > connecting to the VPN via NM now sets the proper MTU on tun0 and your
> > > > connection works again?
> > > 
> > > 
> > > I can verify that going back to NM 1.0.2 and connecting to VPN via NM
> > > sets the proper MTU on vpn0 and my connection works.
> > 
> > Ok, thanks, regression seems to be squarely on NM, reassigning again.
> 
> I've done some limited testing with the latest version 1.0.6-1 from 
> unstable.
> 
> So far, the issue seems to be resolved.

Further testing shows the issue continues with 1.0.6. ssh works fine in most 
cases. scp fails in all cases. Reverting back to 1.0.2 resolves the problem.

-- 
JP

Bug#794237: openconnect: Does not work with network-manager 1.0.4

[LeJacq, Jean Pierre]

On Fri, 7 Aug 2015 19:13:15 -0400 Mike Miller  wrote:
> Control: reassign -1 network-manager 1.0.4-1
> Control: retitle -1 network-manager: sets VPN tunnel MTU incorrectly
> 
> On Fri, Aug 07, 2015 at 22:31:44 +0300, Matti Koskimies wrote:
> > On Fri, 2015-08-07 at 09:19 -0400, Mike Miller wrote:
> > > On Fri, Aug 7, 2015 at 13:53:49 +0100, David Woodhouse wrote:
> > > > I blame NM.
> > > 
> > > Fair enough. Matt already said that reverting to NM 1.0.2 was enough
> > > to restore his connection, but that was while running openconnect
> > > standalone. Matt, can you verify that going back to NM 1.0.2 and
> > > connecting to the VPN via NM now sets the proper MTU on tun0 and your
> > > connection works again?
> > 
> > 
> > I can verify that going back to NM 1.0.2 and connecting to VPN via NM
> > sets the proper MTU on vpn0 and my connection works.
> 
> Ok, thanks, regression seems to be squarely on NM, reassigning again.

I've done some limited testing with the latest version 1.0.6-1 from unstable.

So far, the issue seems to be resolved.

-- 
JP

Bug#787033: [calligra] New release 2.9.4 available upstream

[LeJacq, Jean Pierre]

Package: calligra
Version: 1:2.8.5+dfsg-1+b2
Severity: wishlist

--- Please enter the report below this line. ---

New release 2.9.4 available upstream.


--- System information. ---
Architecture: amd64
Kernel:   Linux 4.0.0-1-amd64

Debian Release: stretch/sid
  800 unstableftp.us.debian.org 
  500 testing ftp.us.debian.org 
  500 stable  dl.google.com 
  100 experimentalftp.us.debian.org 

--- Package information. ---
Package's Depends field is empty.

Package's Recommends field is empty.

Package's Suggests field is empty.

-- 
JP


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#785378: [dbus] dbus-uuidgen: undefined symbol: dbus_internal_do_not_use_create_uuid

[LeJacq, Jean Pierre]

On Friday 15 May 2015 09:51:28 LeJacq, Jean Pierre wrote:
> On Friday 15 May 2015 14:48:15 Simon McVittie wrote:
> > On 15/05/15 14:45, Simon McVittie wrote:
> > > Do you have libdbus-1-3 version 1.9.16 (from experimental) installed? I
> > > suspect you might?
> > 
> > If my guess is correct, then this is really a bug in
> > libdbus-1-3/1.9.16-1 (which should have a Breaks relationship with older
> > dbus versions), and you should be able to work around it by either
> > upgrading dbus to the matching version, or downgrading libdbus-1-3.
> 
> Yes I do indeed have libdbus-1-3 version 1.9.16 from experimental.
> 
> I'm not sure how I got dbus from sid but libdbus-1-3 from experimental. I
> will attempt getting them to the same version - 1.9.16.

I can confirm that the issue is resolved when both dbus and libdbus-1-3 are at 
version 1.9.16 - both from experimental.

-- 
JP


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#785378: [dbus] dbus-uuidgen: undefined symbol: dbus_internal_do_not_use_create_uuid

[LeJacq, Jean Pierre]

On Friday 15 May 2015 14:48:15 Simon McVittie wrote:
> On 15/05/15 14:45, Simon McVittie wrote:
> > Do you have libdbus-1-3 version 1.9.16 (from experimental) installed? I
> > suspect you might?
> 
> If my guess is correct, then this is really a bug in
> libdbus-1-3/1.9.16-1 (which should have a Breaks relationship with older
> dbus versions), and you should be able to work around it by either
> upgrading dbus to the matching version, or downgrading libdbus-1-3.

Yes I do indeed have libdbus-1-3 version 1.9.16 from experimental.

I'm not sure how I got dbus from sid but libdbus-1-3 from experimental. I will 
attempt getting them to the same version - 1.9.16.

-- 
JP


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#785378: [dbus] dbus-uuidgen: undefined symbol: dbus_internal_do_not_use_create_uuid

[LeJacq, Jean Pierre]

Package: dbus
Version: 1.8.18-1
Severity: important

--- Please enter the report below this line. ---

Recent upgrade from version 1.8.16 to 1.8.18 leads to the following error 
during the boot process:

/usr/bin/dbus-uuidgen: symbol lookup error: /usr/bin/dbus-uuidgen: undefined 
symbol: dbus_internal_do_not_use_create_uuid

This leads to many applications failing to run properly including kde, 
network-manager, power.

Downgrading to 1.8.16 resolves the issues.


--- System information. ---
Architecture: amd64
Kernel:   Linux 4.0.0-1-amd64

Debian Release: stretch/sid
  800 unstableftp.us.debian.org 
  500 testing ftp.us.debian.org 
  500 stable  dl.google.com 
  100 experimentalftp.us.debian.org 

--- Package information. ---
Depends(Version) | Installed
-+-=
libaudit1   (>= 1:2.2.1) | 1:2.4-1+b1
libc6  (>= 2.17) | 
libcap-ng0   | 
libdbus-1-3   (>= 1.7.6) | 
libexpat1 (>= 2.0.1) | 
libselinux1  (>= 2.0.65) | 
libsystemd-journal0  (>= 38) | 
libsystemd-login0(>= 31) | 
adduser  | 
lsb-base (>= 3.2-14) | 


Package Status  (Version) | Installed
=-+-===
systemd   | 215-17
systemd-sysv  | 
dbus-x11  | 1.8.16-1


Package's Recommends field is empty.

Suggests  (Version) | Installed
===-+-===
dbus-x11| 1.8.16-1

-- 
JP


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#781636: [doxygen] SVG function caller graph incorrectly includes a $ character instead of relative path in xlink::href

[LeJacq, Jean Pierre]

Package: doxygen
Version: 1.8.8-5
Severity: normal

--- Please enter the report below this line. ---

Generated function caller graphs in SVG have an invalid xlink:href. It starts 
the href with a '$' character instead of the relative path.

An example is:



This should be:



--- System information. ---
Architecture: amd64
Kernel:   Linux 3.18.0-trunk-amd64

Debian Release: 8.0
  800 unstableftp.us.debian.org 
  500 testing ftp.us.debian.org 
  500 stable  dl.google.com 
  100 experimentalftp.us.debian.org 

--- Package information. ---
Depends   (Version) | Installed
===-+-=
libc6 (>= 2.14) | 
libgcc1(>= 1:4.1.1) | 
libstdc++6   (>= 4.1.1) | 


Package's Recommends field is empty.

Suggests   (Version) | Installed
-+-===
doxygen-latex| 
doxygen-doc  | 1.8.8-5
doxygen-gui  | 1.8.8-5
graphviz | 2.38.0-7

-- 
JP


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#730048: kmail does not properly quote From field when replying

[LeJacq, Jean Pierre]

On Saturday 31 January 2015 23:10:07 Sandro Knauß wrote:
> Hey,
> 
> can you help me how i do get to this on my own kmail? What I have to do to
> see this behaviour? I tried to set the name in the identity to Knauß,
> Sandro (without quotes) and it updates the email adress after save
> correctly to "Knauß, Sandro" 
> 
> Maybe opening the edit dialog of the identity and close it afterwards
> helps...

Hi Sandro,

Here's a few observations. First my configuration:

- I have multiple identities and multiple accounts.
- One of the identities is set as the default.
- The sticky flag is not set on identity.

If I create a new email, the From address is properly quoted.

If I reply to an email in an account where the identity is not the default, it 
is properly quoted.

If I reply to an email in an account where the identity is the default, it is 
NOT properly quoted.

Try this combination.

-- 
JP





> --
> 
> Am Donnerstag, 29. Januar 2015, 09:32:06 schrieb LeJacq, Jean Pierre:
> > On Thursday 29 January 2015 02:28:02 Sandro Knauß wrote:
> > > tags 730048 +moreinfo
> > > thanks
> > > 
> > > I tried to reproduced this issue but failed. Do you see this behaviour
> > > only
> > > for some emailadresses or for all and/or with the current version?
> > 
> > Hi Sandro,
> > 
> > Thanks for maintaining the package and in particular investigating this
> > bug.
> > 
> > I still see the issue with version 4.14.2. I've attached two screen-shots
> > with and without the identity set to sticky. Only when the identity is set
> > to sticky is the proper quoting working.
> > 
> > Our policy is to have the From address formatted as "Family, Given" which
> > is why the quotes are necessary.


-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#766383: [make] make version 4.1 available

[LeJacq, Jean Pierre]

Package: make
Version: 4.0-8
Severity: wishlist

--- Please enter the report below this line. ---

GNU Make 4.1 was released 2014-Oct-05. This is mostly a bug fix release but 
there are a few user visible changes.

http://savannah.gnu.org/forum/forum.php?forum_id=8112

--- System information. ---
Architecture: amd64
Kernel:   Linux 3.17-1-amd64

Debian Release: jessie/sid
  800 unstableftp.us.debian.org 
  500 testing ftp.us.debian.org 
  500 stable  dl.google.com 
  100 experimentalftp.us.debian.org 

--- Package information. ---
Depends  (Version) | Installed
==-+-===
libc6(>= 2.17) | 


Package's Recommends field is empty.

Suggests  (Version) | Installed
===-+-===
make-doc| 4.0-2

-- 
JP


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#758062: [eclipse-cdt] New project wizard result in null pointer exception when populating project types

[LeJacq, Jean Pierre]

Package: eclipse-cdt
Version: 8.4.0-1
Severity: normal

--- Please enter the report below this line. ---

Upgrade from 8.3 to 8.4 results in a null pointer exception when using the new 
project wizard. The project type list is empty preventing creation of a new 
project.

The following stack trace is stream to ~/workspace/.metadata/.log

!ENTRY org.eclipse.ui 4 0 2014-08-12 13:34:16.551
!MESSAGE Unhandled event loop exception
!STACK 0
java.lang.NullPointerException
at 
org.eclipse.cdt.ui.wizards.CDTMainWizardPage.switchTo(CDTMainWizardPage.java:432)
at 
org.eclipse.cdt.ui.wizards.CDTMainWizardPage.createControl(CDTMainWizardPage.java:89)
at org.eclipse.jface.wizard.Wizard.createPageControls(Wizard.java:174)
at 
org.eclipse.jface.wizard.WizardDialog.createPageControls(WizardDialog.java:736)
at 
org.eclipse.jface.wizard.WizardDialog.setWizard(WizardDialog.java:1182)
at 
org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:1241) 
 
at 
org.eclipse.jface.wizard.WizardDialog.access$4(WizardDialog.java:1238)  
 
at org.eclipse.jface.wizard.WizardDialog$8.run(WizardDialog.java:1227)  

at 
org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)   
 
at 
org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:1225)  
 
at 
org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:915)
 
at 
org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:428)  
 
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)   

at 
org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:248)   
 
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) 

at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1276)   

at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3562) 

at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3186)   

at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)

at org.eclipse.jface.window.Window.open(Window.java:801)
at 
org.eclipse.ui.actions.NewProjectAction.run(NewProjectAction.java:117)
at 
org.eclipse.team.internal.ccvs.ui.wizards.CheckoutAsWizard.getNewProject(CheckoutAsWizard.java:296)
at 
org.eclipse.team.internal.ccvs.ui.wizards.CheckoutAsWizard.performConfigureAndCheckout(CheckoutAsWizard.java:199)
at 
org.eclipse.team.internal.ccvs.ui.wizards.CheckoutAsWizard.performFinish(CheckoutAsWizard.java:131)
at 
org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:827)
at 
org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:432)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
at 
org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:248)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1276)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3562)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3186)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at 
org.eclipse.team.internal.ccvs.ui.actions.CheckoutAsAction.execute(CheckoutAsAction.java:43)
at 
org.eclipse.team.internal.ccvs.ui.actions.CVSAction.run(CVSAction.java:117)
at 
org.eclipse.team.internal.ui.actions.TeamAction.runWithEvent(TeamAction.java:549)
at 
org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:241)
at 
org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:584)
at 
org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at 
org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1276)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3562)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3186)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2701)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2665)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2499)
at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:679)
at 
org.

Bug#750016: chromium: pepper and hangout plugins no longer working after update

[LeJacq, Jean Pierre]

Is the proposed solution for the flash plugin applicable to hangouts?

-- 
JP


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#748073: chromium 35.x still does not work with hangouts

[LeJacq, Jean Pierre]

I'm testing with chromium  35.0.1916.153-2.

The pepper flash plugin is now working.

hangouts still fails with a message saying to install even when it is already 
installed.

Downgrading to 34.x resolves the problem.

-- 
JP


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#750016: chromium: pepper and hangout plugins no longer working after update

[LeJacq, Jean Pierre]

Package: chromium
Version: 36.0.1985.18-2
Severity: normal

Dear Maintainer,

After upgrading to versions 35.0.1916.114-2 (sid) or 36.0.1985.18-2
(experimental), neither the pepper or hangout plugin are no longer
functional. The hangout plug is shown on install but when trying to
invoke, it prompts to install the plugin again.


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.14-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages chromium depends on:
ii  gconf-service3.2.6-2
ii  libasound2   1.0.27.2-4
ii  libc62.18-7
ii  libcairo21.12.16-2
ii  libcap2  1:2.22-1.2
ii  libcups2 1.7.2-3
ii  libdbus-1-3  1.8.2-1
ii  libevent-2.0-5   2.0.21-stable-1
ii  libexpat12.1.0-5
ii  libflac8 1.3.0-2
ii  libfontconfig1   2.11.0-5
ii  libfreetype6 2.5.2-1
ii  libgcc1  1:4.9.0-5
ii  libgconf-2-4 3.2.6-2
ii  libgcrypt20  1.6.1-2
ii  libgdk-pixbuf2.0-0   2.30.7-1
ii  libglib2.0-0 2.40.0-3
ii  libgtk2.0-0  2.24.23-1
ii  libharfbuzz0b0.9.28-2
ii  libicu52 52.1-3
ii  libjpeg8 8d-2
ii  libnspr4 2:4.10.4-1
ii  libnspr4-0d  2:4.10.4-1
ii  libnss3  2:3.16-1
ii  libopus0 1.1-1
ii  libpango-1.0-0   1.36.3-1
ii  libpangocairo-1.0-0  1.36.3-1
ii  libpng12-0   1.2.50-1
ii  libprotobuf8 2.5.0-9
ii  libsnappy1   1.1.2-1
ii  libspeechd2  0.8-6
ii  libspeex11.2~rc1.1-1
ii  libstdc++6   4.9.0-5
ii  libudev1 204-10
ii  libwebp5 0.4.0-4
ii  libwebpdemux10.4.0-4
ii  libx11-6 2:1.6.2-2
ii  libxcomposite1   1:0.4.4-1
ii  libxcursor1  1:1.1.14-1
ii  libxdamage1  1:1.1.4-1
ii  libxext6 2:1.3.2-1
ii  libxfixes3   1:5.0.1-1
ii  libxi6   2:1.7.2-1
ii  libxml2  2.9.1+dfsg1-3
ii  libxrandr2   2:1.4.2-1
ii  libxrender1  1:0.9.8-1
ii  libxslt1.1   1.1.28-2
ii  libxss1  1:1.2.2-1
ii  libxtst6 2:1.2.2-1
ii  xdg-utils1.1.0~rc1+git20111210-7.1

chromium recommends no packages.

Versions of packages chromium suggests:
ii  chromium-inspector  36.0.1985.18-2
ii  chromium-l10n   36.0.1985.18-2
ii  mozplugger  1.14.5-2

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#730048: kmail does not properly quote From field when replying

[LeJacq, Jean Pierre]

Package: kmail
Version: 4:4.11.3-1
Severity: normal

When sending a new message, the "From" field is properly quoted. For example:

  From: "LeJacq, Jean Pierre" 

When replying to a message, the "From" field in not quoted, resulting
in an incorrect address in the receipient's email client.

  From: LeJacq, Jean Pierre 

If the Identity selection is toggled, the proper quoting is
applied. This is the workaround I am using.


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.11-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages kmail depends on:
ii  kde-runtime   4:4.11.3-1
ii  kdepim-runtime4:4.11.3-1
ii  kdepimlibs-kio-plugins4:4.11.3-1
ii  libakonadi-calendar4  4:4.11.3-1
ii  libakonadi-contact4   4:4.11.3-1
ii  libakonadi-kde4   4:4.11.3-1
ii  libakonadi-kmime4 4:4.11.3-1
ii  libakonadiprotocolinternals1  1.10.2-2
ii  libc6 2.17-96
ii  libcalendarsupport4   4:4.11.3-1
ii  libgcc1   1:4.8.2-5
ii  libgpgme++2   4:4.11.3-1
ii  libgrantlee-core0 0.3.0-5
ii  libincidenceeditorsng44:4.11.3-1
ii  libkabc4  4:4.11.3-1
ii  libkalarmcal2 4:4.11.3-1
ii  libkcalcore4  4:4.11.3-1
ii  libkcalutils4 4:4.11.3-1
ii  libkcmutils4  4:4.11.3-2
ii  libkdecore5   4:4.11.3-2
ii  libkdepim44:4.11.3-1
ii  libkdeui5 4:4.11.3-2
ii  libkio5   4:4.11.3-2
ii  libkleo4  4:4.11.3-1
ii  libkmime4 4:4.11.3-1
ii  libknewstuff3-4   4:4.11.3-2
ii  libknotifyconfig4 4:4.11.3-2
ii  libkontactinterface4  4:4.11.3-1
ii  libkparts44:4.11.3-2
ii  libkpgp4  4:4.11.3-1
ii  libkpimidentities44:4.11.3-1
ii  libkpimtextedit4  4:4.11.3-1
ii  libkpimutils4 4:4.11.3-1
ii  libkprintutils4   4:4.11.3-2
ii  libksieveui4  4:4.11.3-1
ii  libktnef4 4:4.11.3-1
ii  libmailcommon44:4.11.3-1
ii  libmailimporter4  4:4.11.3-1
ii  libmailtransport4 4:4.11.3-1
ii  libmessagecomposer4   4:4.11.3-1
ii  libmessagecore4   4:4.11.3-1
ii  libmessagelist4   4:4.11.3-1
ii  libmessageviewer4 4:4.11.3-1
ii  libnepomukcore4   4:4.11.3-1
ii  libpimcommon4 4:4.11.3-1
ii  libqt4-dbus   4:4.8.5+git121-g2a9ea11+dfsg1-2
ii  libqt4-network4:4.8.5+git121-g2a9ea11+dfsg1-2
ii  libqt4-xml4:4.8.5+git121-g2a9ea11+dfsg1-2
ii  libqtcore44:4.8.5+git121-g2a9ea11+dfsg1-2
ii  libqtgui4 4:4.8.5+git121-g2a9ea11+dfsg1-2
ii  libqtwebkit4  2.2.1-7
ii  libsendlater4 4:4.11.3-1
ii  libsolid4 4:4.11.3-2
ii  libsoprano4   2.9.4+dfsg-1
ii  libstdc++64.8.2-5
ii  libtemplateparser44:4.11.3-1
ii  perl  5.18.1-4

Versions of packages kmail recommends:
ii  gnupg-agent   2.0.22-1
ii  gnupg22.0.22-1
ii  pinentry-gtk2 [pinentry-x11]  0.8.1-1
ii  pinentry-qt4 [pinentry-x11]   0.8.1-1

Versions of packages kmail suggests:
ii  bogofilter1.2.4+dfsg1-2
ii  clamav0.97.8+dfsg-1
ii  kaddressbook  4:4.11.3-1
ii  kleopatra 4:4.11.3-1
ii  procmail  3.22-21

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#689224: [libboost-all-dev] Version 1.53 is available

[LeJacq, Jean Pierre]

Package: libboost-all-dev
Version: 1.50

--- Please enter the report below this line. ---


--- System information. ---
Architecture: amd64
Kernel:   Linux 3.6-trunk-amd64

Debian Release: 7.0
  500 unstableftp.us.debian.org 
1 experimentalftp.us.debian.org 

--- Package information. ---
Package's Depends field is empty.

Package's Recommends field is empty.

Package's Suggests field is empty.

-- 
JP

m: +1 609 468 6172


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#685240: [live-build] init respawing too fast - unable to cd to '/home/user'

[LeJacq, Jean Pierre]

Package: live-build
Version: 3.0~a57-1
Severity: important

--- Please enter the report below this line. ---

Configuring debian-live using the git rescue configuration and building an hdd 
image, results in an usable system.

On booting using kvm init is disabled after attempting to login as "user" with 
the error message:

  Unable to cd to '/home/user'

After waiting 5 minutes, init attempts and fails again.


--- System information. ---
Architecture: amd64
Kernel:   Linux 3.4-trunk-amd64

Debian Release: wheezy/sid
  500 unstableftp.us.debian.org 
1 experimentalftp.us.debian.org 

--- Package information. ---
Depends  (Version) | Installed
==-+-===
debootstrap| 1.0.42
 OR cdebootstrap   | 
 OR cdebootstrap-static| 


Recommends(Version) | Installed
===-+-===
live-boot-doc   | 3.0~b1-1
live-config-doc | 3.0.3-1
live-manual-html| 1:3.0~a15-1
 OR live-manual | 
cpio| 2.11-8
gnu-fdisk   | 1.2.4-3.1


Suggests(Version) | Installed
=-+-===
dosfstools| 3.0.13-1
genisoimage   | 9:1.1.11-2
git   | 1:1.7.10.4-1
memtest86+| 4.20-1.1
 OR memtest86 | 
mtools| 4.0.17-1
parted| 2.3-10
squashfs-tools| 
 OR mtd-tools | 
sudo  | 1.8.5p2-1
 OR fakeroot  | 1.18.4-2
syslinux  | 
 OR grub  | 
uuid-runtime  | 2.20.1-5.1
win32-loader  | 



--- Output from package bug script ---

-- 
JP

m: +1 609 468 6172


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#684624: [chromium] Does nostart due to incorrect assumption about permission of /run/shm

[LeJacq, Jean Pierre]

Package: chromium
Version: 21.0.1180.75~r150248-1
Severity: normal
Tags: security
X-Debbugs-CC: secure-testing-t...@lists.alioth.debian.org

--- Please enter the report below this line. ---

On startup, chromium reports the following error:

[16213:16229:21996263860:ERROR:shared_memory_posix.cc(171)] Creating shared 
memory in /dev/shm/.org.chromium.Chromium.mmqQyr failed: Permission denied
[16213:16229:21996263931:ERROR:shared_memory_posix.cc(174)] Unable to 
access(W_OK|X_OK) /dev/shm: Permission denied
[16213:16229:21996263956:FATAL:shared_memory_posix.cc(176)] This is frequently 
caused by incorrect permissions on /dev/shm.  Try 'sudo chmod 1777 /dev/shm' 
to fix. 
  
Aborted 
   

However, the debian initscript package in /lib/init/mount-functions.sh sets 
the permission to 755.

The recommendation made by chromium seems potentially dangerous since it 
allows anyone to write to this directory.


--- System information. ---
Architecture: amd64
Kernel:   Linux 3.4-trunk-amd64

Debian Release: wheezy/sid
  500 unstableftp.us.debian.org 
  500 stable  deb.opera.com 
1 experimentalftp.us.debian.org 

--- Package information. ---
Depends (Version) | Installed
=-+-===
gconf-service | 3.2.5-1+build1
libasound2(>= 1.0.16) | 1.0.25-4
libatk1.0-0   (>= 1.12.4) | 2.4.0-2
libbz2-1.0| 1.0.6-4
libc6   (>= 2.11) | 2.13-35
libcairo2  (>= 1.6.0) | 1.12.2-2
libcups2   (>= 1.4.0) | 1.5.3-2
libdbus-1-3   (>= 1.2.14) | 1.6.2-2
libevent-2.0-5 (>= 2.0.10-stable) | 2.0.19-stable-3
libexpat1  (>= 2.0.1) | 2.1.0-1
libflac8   (>= 1.2.1) | 1.2.1-6
libfontconfig1 (>= 2.9.0) | 2.9.0-7
libfreetype6   (>= 2.3.9) | 2.4.9-1
libgcc1  (>= 1:4.1.1) | 1:4.7.1-6
libgconf-2-4  (>= 2.31.1) | 3.2.5-1+build1
libgcrypt11(>= 1.4.5) | 1.5.0-3
libgdk-pixbuf2.0-0(>= 2.22.0) | 2.26.1-1
libglib2.0-0  (>= 2.18.0) | 2.32.3-1
libgnome-keyring0 (>= 2.22.2) | 3.4.1-1
libgtk2.0-0   (>= 2.24.0) | 2.24.10-2
libjpeg8  (>= 8c) | 8d-1
libnspr4(>= 2:4.9-2~) | 2:4.9.2-1
libnss3 (>= 2:3.13.4-2~)  | 2:3.13.5-1
 OR libnss3-1d(>= 3.12.3) | 2:3.13.5-1
libpango1.0-0 (>= 1.22.0) | 1.30.0-1
libpng12-0  (>= 1.2.13-4) | 1.2.49-2
libpulse0 (>= 0.99.1) | 2.0-5
libspeex1(>= 1.2~beta3-1) | 1.2~rc1-6
libstdc++6   (>= 4.6) | 4.7.1-6
libudev0 (>= 146) | 175-5
libx11-6  | 2:1.5.0-1
libxcomposite1   (>= 1:0.3-1) | 1:0.4.3-2
libxext6  | 2:1.3.1-2
libxfixes3| 1:5.0-4
libxml2(>= 2.7.4) | 2.8.0+dfsg1-5
libxrender1   | 1:0.9.7-1
libxslt1.1(>= 1.1.25) | 1.1.26-13
libxss1   | 1:1.2.2-1
zlib1g   (>= 1:1.2.0) | 1:1.2.7.dfsg-13
xdg-utils | 1.1.0~rc1+git20111210-6
chromium-inspector| 21.0.1180.75~r150248-1


Package's Recommends field is empty.

Suggests   (Version) | Installed
-+-===
chromium-l10n| 21.0.1180.75~r150248-1


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#665494: [cryptsetup] decrypt_gnupg incorrectly assumes /usr/bin/gpg is available on root partition

[LeJacq, Jean Pierre]

Package: cryptsetup
Version: 2:1.4.1-2
Severity: normal

--- Please enter the report below this line. ---

On systems that use separate encrypted logical volumes for "/" and "/usr', the 
decrypt_gnupg will fail due to the unavailability of gpg since it is not 
available.

Note that the gpg executable copied into the initramfs image is not available 
after the root volume is decrypted. 


--- System information. ---
Architecture: amd64
Kernel:   Linux 3.2.0-2-amd64

Debian Release: wheezy/sid
  500 unstableftp.us.debian.org 
  500 stable  deb.opera.com 

--- Package information. ---
Depends (Version) | Installed
=-+-===
libc6(>= 2.8) | 2.13-27
libcryptsetup4 (>= 2:1.4) | 2:1.4.1-2
libpopt0(>= 1.14) | 1.16-3
debconf (>= 0.5)  | 1.5.42
 OR debconf-2.0   | 
dmsetup   | 2:1.02.67-2


Package's Recommends field is empty.

Suggests(Version) | Installed
=-+-===
udev  | 175-3.1
initramfs-tools(>= 0.91)  | 0.101
 OR linux-initramfs-tool  | 
busybox   | 1:1.19.3-5
dosfstools| 3.0.12-1
liblocale-gettext-perl| 1.05-7+b1



--- Output from package bug script ---
-- /proc/cmdline
BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=/dev/mapper/vg0-lv3-crypt ro quiet

-- /etc/crypttab
#
vg0-lv3-crypt/dev/mapper/vg0-lv3/etc/keys/cryptkey.gpg 
luks,keyscript=decrypt_gnupg
vg0-lv1-crypt/dev/mapper/vg0-lv1/etc/keys/cryptkey.gpg 
luks,keyscript=decrypt_gnupg
vg0-lv4-crypt/dev/mapper/vg0-lv4/etc/keys/cryptkey.gpg 
luks,keyscript=decrypt_gnupg
vg0-lv5-crypt/dev/mapper/vg0-lv5/etc/keys/cryptkey.gpg 
luks,keyscript=decrypt_gnupg
vg0-lv6-crypt/dev/mapper/vg0-lv6/etc/keys/cryptkey.gpg 
luks,keyscript=decrypt_gnupg
vg0-lv7-crypt/dev/mapper/vg0-lv7/etc/keys/cryptkey.gpg 
luks,keyscript=decrypt_gnupg
vg0-lv8-crypt/dev/mapper/vg0-lv8/etc/keys/cryptkey.gpg 
luks,keyscript=decrypt_gnupg
vg0-lv9-crypt/dev/mapper/vg0-lv9/etc/keys/cryptkey.gpg 
luks,keyscript=decrypt_gnupg
vg0-lv12-crypt   /dev/mapper/vg0-lv12   /etc/keys/cryptkey.gpg 
luks,keyscript=decrypt_gnupg


-- /etc/fstab
/dev/mapper/vg0-lv3-crypt  / ext4defaults   0   

2
proc   /proc procdefaults   0   

0
/dev/mapper/vg0-lv1-crypt  none  swapsw 
0   0
/dev/mapper/vg0-lv4-crypt  /tmp  ext4nodev,nosuid,noexec0   

2
/dev/mapper/vg0-lv5-crypt  /var  ext4nodev,nosuid   0   

2
/dev/mapper/vg0-lv6-crypt  /var/tmp  ext4nodev,nosuid,noexec
0   2
/dev/mapper/vg0-lv7-crypt  /var/log  ext4nodev,nosuid,noexec0   

2
/dev/mapper/vg0-lv8-crypt  /var/mail ext4nodev,nosuid,noexec0   

2
/dev/mapper/vg0-lv9-crypt  /srv  ext4nodev,nosuid,noexec,ro 0   

2
/dev/mapper/vg0-lv10   /usr  ext4nodev,ro   0   

2
/dev/mapper/vg0-lv11   /opt  ext4nodev,nosuid,ro0   

2
/dev/mapper/vg0-lv12-crypt /home ext4defaults,nosuid0   

2
/dev/mapper/vg0-lv2/boot ext4nodev,nosuid,ro0   

1
/dev/scd0  /media/cdrom0 udf,iso9660 user,noauto0   

0

-- lsmod
Module  Size  Used by
hidp   22012  0 
pci_stub   12429  1 
vboxpci19066  0 
vboxnetadp 13155  0 
vboxnetflt 23571  0 
vboxdrv   190057  3 vboxnetflt,vboxnetadp,vboxpci
parport_pc 22364  0 
ppdev  12763  0 
lp 17149  0 
parport31858  3 lp,ppdev,parport_pc
rfcomm 33656  14 
bnep   17567  2 
binfmt_misc12957  1 
fuse   61981  1 
snd_hda_codec_hdmi 30783  1 
snd_hda_codec_realtek   188748  1 
joydev 17266  0 
arc4   12458  2 
iwlwifi   166703  0 
snd_hda_intel  26345  7 
snd_hda_codec  78031  3 
snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
uvcvideo   57744  0 
videodev   70889  1 uvcvideo
snd_hwdep  13186  1 snd_hda_codec
snd_pcm63900  5 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
mac80211  192768  1 iwlwifi
snd_page_alloc 13003  2 snd_pcm,snd_hda_intel
i915  351780  3 
drm_kms_helper 27227  1 i915
drm   167670  4 drm_kms_helper,i915
ac 12624  0 
dell_wmi   12477  0 
sparse_keymap  12760  1 dell_wmi
snd_seq

Bug#663370: [package:gnupg-agent] gnupg-agent does not support openssh certificates

[LeJacq, Jean Pierre]

Package: package:gnupg-agent
Severity: normal

--- Please enter the report below this line. ---

OpenSSH has supported certificates since version 5.6p1. gnupg-agent does not 
appear to support 
certificates as of 2.0.18.

When trying to add a private key that has both a standard public key and a 
signed certificate, the 
public key is added properly, but the certificate fails. A typical session is:

$ ls ~/.ssh/
-rw--- 1 jplejacq jplejacq  1743 Nov  5 10:45 id_rsa
-rw--- 1 jplejacq jplejacq  1525 Mar  9 01:18 id_rsa-cert.pub
-rw--- 1 jplejacq jplejacq   403 Nov  5 10:45 id_rsa.pub

$ ssh-add -l
The agent has no identities.

$ ssh-add ~/.ssh/id_rsa
Enter passphrase for /home/jplejacq/.ssh/id_rsa: 
# ... the window pinentry screen opens at this point for confirmation ...
Identity added: /home/jplejacq/.ssh/id_rsa (/home/jplejacq/.ssh/id_rsa)
SSH_AGENT_FAILURE
Certificate /home/jplejacq/.ssh/id_rsa-cert.pub (com.quoininc.jplejacq) add 
failed
Certificate added: /home/jplejacq/.ssh/id_rsa-cert.pub (com.quoininc.jplejacq)

$ ssh-add -l
2048 4a:e8:77:8e:30:61:c3:15:e4:a0:fd:ca:cf:e2:fa:b2 /home/jplejacq/.ssh/id_rsa 
(RSA)

$ ssh-add -L
ssh-rsa 
B3NzaC1yc2EBIwAAAQEAx1XcYOKi4wj99vfZ3XoFlX7WAm10y0GHtUXlikXf+yGYrMwKPY9BpnVq1eJ8zcwH01J3qIUmLr/YW0MumwKgBq3wo6olyb1gKPrCiLz0JDtDzG/HZMWpsABakCCz8RaBB8XpUIv+4QdJNF/5bHJ7fDKvDq/Bsr1Az/x3VRTvd7SGwWo8C6qS2/JTuAjdTVJ4BWxaeXIUCCsPS1f86z6x7AtLpRrEjLykrf6buFkuEshzXTLSEvcKPJ+8irFot6nJhWQL7bYwCYwFMhfScT5l76poJ4BeM/ViLCnmXzBW89MUIIkhAja0rZNchLjkxmNyCEh2+FQAeSyzakcgTpIeYQ==
 
/home/jplejacq/.ssh/id_rsa


--- System information. ---
Architecture: amd64
Kernel:   Linux 3.2.0-2-amd64

Debian Release: wheezy/sid
  500 unstableftp.us.debian.org 

--- Package information. ---
Package's Depends field is empty.

Package's Recommends field is empty.

Package's Suggests field is empty.

-- 
JP

m: +1 609 468 6172



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#615990: linux-image-2.6.37-2-amd64: b44 driver causes panic when using swiotlb

[LeJacq, Jean Pierre]

Package: linux-2.6
Version: 2.6.37-2
Severity: important
Tags: upstream

There is a know bug with the b44 driver that causes a kernel panic on boot.
This may be limited to the Dell Vostro 1500 with more than 2 Gb of memory and
64 bit kernel. The following link describes the problem and a proposed patch:

https://patchwork.kernel.org/patch/522971/




-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: Dell Inc.
product_name: Vostro 1500 
product_version: 
chassis_vendor: Dell Inc.
chassis_version: 
bios_vendor: Dell Inc.
bios_version: A06
board_vendor: Dell Inc.
board_name: 0NX907
board_version:

** Network interface configuration:


auto lo
iface lo inet loopback


iface eth0 inet dhcp
  hwaddress ether 00:1E:37:86:3A:0F

iface lowesguest inet dhcp
  pre-up ip link set wlan0 up
  wireless-mode master
  wireless-essid LOWESGUEST

iface princeton inet dhcp
  pre-up ip link set wlan0 up
  wireless-mode master
  wireless-essid linksys

iface cltnet inet dhcp
  pre-up ip link set wlan0 up
  wireless-mode master
  wireless-essid CLTNET

iface conch inet dhcp
  pre-up ip link set wlan0 up
  wireless-mode master
  wireless-essid 'Conch Key Cottages'
wireless-key ***

iface serranet inet dhcp
  pre-up ip link set wlan0 up
  wpa-driver wext
  wpa-ssid: private
wpa-psk: ***



** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory 
Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:0228]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller 
(primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0228]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-  [disabled]
Capabilities: 
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller 
(secondary) [8086:2a03] (rev 0c)
Subsystem: Dell Device [1028:0228]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #4 [8086:2834] (rev 02) 
(prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0228]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
SERR- TAbort- 
SERR- TAbort- 
SERR- 
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio 
Controller [8086:284b] (rev 02)
Subsystem: Dell Device [1028:0228]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 1 [8086:283f] (rev 02) (prog-
if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 2 [8086:2841] (rev 02) (prog-
if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 4 [8086:2845] (rev 02) (prog-
if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #1 [8086:2

Bug#602725: gconf2: upgrade failure

[LeJacq, Jean Pierre]

On Sunday 07 November 2010 13:25:42 Josselin Mouette wrote:
> Le dimanche 07 novembre 2010 à 10:39 -0500, LeJacq, Jean Pierre a
> 
> écrit :
> > Preparing to replace gconf2 2.28.1-5 (using
> > .../gconf2_2.28.1-6_amd64.deb) ... Unpacking replacement gconf2 ...
> > 
> > dpkg: error processing /var/cache/apt/archives/gconf2_2.28.1-6_amd64.deb 
(--unpack):
> >  unable to create updated files list file for package gconf2:
> >  Input/output error
> 
> This is not related to gconf2, this is a (bad) dpkg error. I hope for
> you that you have backups.
> 
> You should see the errors appear in the output of “dmesg”.

You are correct. Thanks for the help.

I will close the bug.




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#602725: gconf2: upgrade failure

[LeJacq, Jean Pierre]

Package: gconf2
Version: 2.28.1-5
Severity: important

Upgrading gconf2 results in the following messages:


Preparing to replace gconf2 2.28.1-5 (using .../gconf2_2.28.1-6_amd64.deb) ...
Unpacking replacement gconf2 ...
dpkg: error processing /var/cache/apt/archives/gconf2_2.28.1-6_amd64.deb 
(--unpack):
 unable to create updated files list file for package gconf2: Input/output error
configured to not write apport reports
  Processing triggers for man-db ...
Errors were encountered while processing:
 /var/cache/apt/archives/gconf2_2.28.1-6_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages gconf2 depends on:
ii  dbus-x111.2.24-3 simple interprocess messaging syst
ii  gconf2-common   2.28.1-6 GNOME configuration database syste
ii  libc6   2.11.2-7 Embedded GNU C Library: Shared lib
ii  libgconf2-4 2.28.1-6 GNOME configuration database syste
ii  libglib2.0-02.24.2-1 The GLib library of C routines
ii  libxml2 2.7.8.dfsg-1 GNOME XML library
ii  psmisc  22.13-1  utilities that use the proc file s
ii  python  2.6.6-3+squeeze1 interactive high-level object-orie

Versions of packages gconf2 recommends:
ii  libgtk2.0-0   2.20.1-2   The GTK+ graphical user interface 

Versions of packages gconf2 suggests:
pn  gconf-defaults-service (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#570252: linux-image-2.6.32-2-vserver-amd64: unable to boot with blank screen and keyboard frozen

[LeJacq, Jean Pierre]

A recent update of another package, not linux-image-2.6.32-2-vserver-amd64,
appears to have resolved this issue.

The problem appears to have been the mode switching of
the console. The scenario is:

  1) boot with the initrd,
  2) decrypt the root partition,
  3) mount the root partition,
  4) switch console mode (previously screen went blank, now font is smaller)
  5) prompt for decrypting of remaining logical volumes. (previously invisible)

I think we can close the bug except you might want to consider
delaying the console mode switching to after all the volumes are
mounted. This would make the boot process more robust.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#570252: linux-image-2.6.32-2-vserver-amd64: unable to boot with blank screen and keyboard frozen

[LeJacq, Jean Pierre]

On Wednesday 17 February 2010 12:35:34 maximilian attems wrote:
> tags 570252 moreinfo
> stop
> 
> On Wed, Feb 17, 2010 at 11:38:07AM -0500, LeJacq, Jean Pierre wrote:
> > Package: linux-2.6
> > Version: 2.6.32-8
> > Severity: critical
> > Justification: breaks the whole system
> 
> that would be the case if it would affect many aka X > 100 boxes.
> anyway important is enough.
> 
> > grub-pc successfully loads the initrd images. After decrypting
> > the root file system, the boot fails with the screen going blank
> > and system unresponsive (keycap and Ctrl-Alt-Delete have no effect).
> >
> > The last visible line appears to be something related to [drm].
> >
> > The linux-image-2.6.32-2-amd64 has the same problem.
> >
> > I am able to boot successfully boot using linux-image-2.6.30-2-amd64.
> 
> can you access your box from the network?
> did you try to ping it or to ssh to it (do you have sshd running on it)
>
> where is the dmesg of the affected box?
> please put netconsole on it

The box is completely frozen. Only the root partition was
able to be mounted before the system froze. I know the
others aren't mounted since they require decryption.

There is no network activity and no access to the box is possible.

Earlier releases of 2.6.32 worked fine.

Thanks Maimilian for looking into this.

-- 
JP

m: +1 609 468 6172



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/201002171329.00884.jp.lej...@quoininc.com

Bug#570252: linux-image-2.6.32-2-vserver-amd64: unable to boot with blank screen and keyboard frozen

[LeJacq, Jean Pierre]

Package: linux-2.6
Version: 2.6.32-8
Severity: critical
Justification: breaks the whole system


grub-pc successfully loads the initrd images. After decrypting
the root file system, the boot fails with the screen going blank
and system unresponsive (keycap and Ctrl-Alt-Delete have no effect).

The last visible line appears to be something related to [drm].

The linux-image-2.6.32-2-amd64 has the same problem.

I am able to boot successfully boot using linux-image-2.6.30-2-amd64.

-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: Dell Inc.
product_name: Vostro 1500
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A06
board_vendor: Dell Inc.
board_name: 0NX907
board_version:

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory 
Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:0228]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
SERR- 
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA 
controller])
Subsystem: Dell Device [1028:0228]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
SERR-  [disabled]
Capabilities: 
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Dell Device [1028:0228]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
SERR- 

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0228]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
SERR- TAbort- 
SERR- TAbort- 
SERR- 
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio 
Controller [8086:284b] (rev 02)
Subsystem: Dell Device [1028:0228]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
SERR- 
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
SERR- TAbort- 
Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport-driver

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
SERR- TAbort- 
Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport-driver

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
SERR- TAbort- 
Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport-driver

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0228]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
SERR- TAbort- 
SERR- TAbort- 
SERR- TAbort- 
SERR- 
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINT

Bug#567884: solved in 1.98~20100128-1.1

[LeJacq, Jean Pierre]

Upgrading to version 1.98~20100128-1.1 solves the problem
for my configuration.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/201002170838.32825.jp.lej...@quoininc.com

Bug#524350: update - success using ubuntu kopete-cryptography package

[LeJacq, Jean Pierre]

Downloading and installing the following ubuntu package enables gpg
in the debian kopete package:

  kopete-cryptography_1.3.0-kde4.3.0-0ubuntu2_amd64.deb

--force-depends is required since there is a dependency on libkleo4
(= 4:4.3.2-0ubuntu6). However, gpg does work fine.

I was not successful rebuilding the package on debian due to the
lack of headers for libkleo4. This clearly must be possible but
haven't worked out the details.

-- 
JP



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#525427: kvpnc: Upgrade breaks Cisco support

[LeJacq, Jean Pierre]

Version 0.9.3-1 in sid resolves this bug. Cisco now works.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#545423: kdenlive: segfault on initial startup

[LeJacq, Jean Pierre]

On Monday 2009 September 07 01:23:52 Patrick Matthäi wrote:
> LeJacq, Jean Pierre schrieb:
> >
> > Versions of packages kdenlive depends on:
> > ii  ffmpeg 5:0.5+svn20090906-0.0 audio/video encoder,
> > streaming ser
> 
> You are using the debian-multimedia.org ffmpeg packages, they break many
> applications. Please downgrade every ffmpeg and libav* package to the
> sid version and try again.

Hi Patrick,

Thanks for your quick response. Downgrading the packages did indeed
work and kdenlive now starts and basic operations appears to work.

Is a change in the library dependencies warranted? Or possibly a
warning in the README.Debian file?

Thank you for your work packaging kdenlive.

-- 
JP



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#545423: kdenlive: segfault on initial startup

[LeJacq, Jean Pierre]

Package: kdenlive
Version: 0.7.5-1 
Severity: grave  
Justification: renders package unusable


On initial startup, the configuration wizard is successful run
with a few warnings (for example, Avformat module not installed though all
debian dependencies are satified). After selecting "finish", kdenlive
crashes with a segmentation fault. strace shows it was last trying to
open the .Xdefaults- file.

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.30-qi.workstation (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages kdenlive depends on:
ii  ffmpeg 5:0.5+svn20090906-0.0 audio/video encoder, streaming ser
ii  kdebase-runtime4:4.3.1-1 runtime components from the offici
ii  kdelibs5   4:4.3.1-1 core libraries for all KDE 4 appli
ii  kdenlive-data  0.7.5-1   a non-linear video editor (data fi
ii  libc6  2.9-26GNU C Library: Shared libraries
ii  libgcc11:4.4.1-3 GCC support library
ii  libmlt++2  1:0.4.4-0.0   MLT multimedia framework C++ wrapp
ii  libmlt11:0.4.4-0.0   multimedia framework (runtime)
ii  libqt4-dbus4:4.5.2-2 Qt 4 D-Bus module
ii  libqt4-network 4:4.5.2-2 Qt 4 network module
ii  libqt4-svg 4:4.5.2-2 Qt 4 SVG module
ii  libqt4-xml 4:4.5.2-2 Qt 4 XML module
ii  libqtcore4 4:4.5.2-2 Qt 4 core module
ii  libqtgui4  4:4.5.2-2 Qt 4 GUI module
ii  libstdc++6 4.4.1-3   The GNU Standard C++ Library v3
ii  melt   1:0.4.4-0.0   command line media player and vide

Versions of packages kdenlive recommends:
ii  dvdauthor0.6.14-3+b3 create DVD-Video file system
pn  dvgrab (no description available)
ii  frei0r-plugins   1.1.22git20090409-2 minimalistic plugin API for video
ii  genisoimage  9:1.1.9-1   Creates ISO-9660 CD-ROM filesystem
ii  recordmydesktop  0.3.8.1-2   Captures audio-video data of a Lin
ii  swh-plugins  0.4.15+1-3  Steve Harris's LADSPA plugins

kdenlive suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#525427: kvpnc: Upgrade breaks Cisco support

[LeJacq, Jean Pierre]

Package: kvpnc
Version: 0.9.1-1
Severity: important

Upgrade to package breaks Cisco support. When connecting,
kvpnc fails with the following message:

  Loading of module "tun" failed!

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-vs2.3.0.35.6-qi.workstation (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages kvpnc depends on:
ii  kdebase-runtime   4:4.2.2-1  runtime components from the offici
ii  kdelibs5  4:4.2.2-2  core libraries for all KDE 4 appli
ii  libc6 2.9-7  GNU C Library: Shared libraries
ii  libgcc1   1:4.3.3-8  GCC support library
ii  libgcrypt11   1.4.4-2LGPL Crypto library - runtime libr
ii  libqt4-dbus   4.4.3-2Qt 4 D-Bus module
ii  libqt4-network4.4.3-2Qt 4 network module
ii  libqt4-qt3support 4.4.3-2Qt 3 compatibility library for Qt
ii  libqt4-svg4.4.3-2Qt 4 SVG module
ii  libqt4-xml4.4.3-2Qt 4 XML module
ii  libqtcore44.4.3-2Qt 4 core module
ii  libqtgui4 4.4.3-2Qt 4 GUI module
ii  libstdc++64.3.3-8The GNU Standard C++ Library v3
ii  menu  2.1.41 generates programs menu for all me
ii  module-init-tools 3.7-pre9-1 tools for managing Linux kernel mo
ii  net-tools 1.60-23The NET-3 networking toolkit
ii  psmisc22.6-1 Utilities that use the proc filesy

kvpnc recommends no packages.

Versions of packages kvpnc suggests:
ii  iptables  1.4.3.2-2  administration tools for packet fi
pn  openct (no description available)
pn  opensc (no description available)
ii  openssl   0.9.8g-16  Secure Socket Layer (SSL) binary a
pn  openswan   (no description available)
pn  openvpn(no description available)
pn  pptp-linux (no description available)
pn  racoon (no description available)
ii  vpnc  0.5.3-1Cisco-compatible VPN client
pn  xl2tpd (no description available)

-- no debconf information




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#524350: closed by Lisandro Damián Nicanor Pérez Meyer (Re: Bug#524350: kopete: gpg encryption support disappeared)

[LeJacq, Jean Pierre]

On Thursday 2009 April 16 12:18:21 Debian Bug Tracking System wrote:
>
> Yes, Kopete uses OTR. Please, see:
>
> 
>
> Regards, Lisandro.

Thanks for your reply.

I'm aware that OTR but that isn't a replacement for gpg. The
lack of digital signatures is a non-starter for many organizations.

I would prefer to keep this bug open, possibly downgrading to
wishlist. There is no reason not to bundle both gpg and otr
together. Further, removing gpg during an upgrade is a significant
problem. I for one will not be upgrading to kde4 for this reason.

-- 
JP




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#524350: kopete: gpg encryption support disappeared

[LeJacq, Jean Pierre]

Package: kopete
Version: 4:4.2.2-1
Severity: normal

On update to kde4, kopete no longer includes gpg encryption
support. This is a substantial downgrade that may prevent
many individuals and organizations from migrating to kde4.

Upstream still seems to support this functionality for kde4.

http://extragear.kde.org/apps/kopete cryptography/


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-vs2.3.0.35.6-qi.workstation (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages kopete depends on:
ii  kdebase-runtime4:4.2.2-1 runtime components from the offici
ii  kdelibs5   4:4.2.2-2 core libraries for all KDE 4 appli
ii  kdepimlibs54:4.2.2-1 core libraries for KDE PIM 4 appli
ii  libasound2 1.0.19-1  shared library for ALSA applicatio
ii  libc6  2.9-7 GNU C Library: Shared libraries
ii  libglib2.0-0   2.20.1-1  The GLib library of C routines
ii  libidn11   1.12-1GNU Libidn library, implementation
ii  libkopete4 4:4.2.2-1 main Kopete library
ii  libmeanwhile1  1.0.2-3   open implementation of the Lotus S
ii  libmsn0.1  4.0~beta3-1   high-level C++ library for MSN Mes
ii  libortp8   3.0.0-3   Real-time Transport Protocol stack
ii  libotr23.2.0-1   Off-the-Record Messaging library
ii  libqca22.0.0-4   libraries for the Qt Cryptographic
ii  libqimageblitz41:0.0.4-4 QImageBlitz image effects library
ii  libqt4-dbus4.4.3-2   Qt 4 D-Bus module
ii  libqt4-network 4.4.3-2   Qt 4 network module
ii  libqt4-network 4.4.3-2   Qt 4 network module
ii  libqt4-qt3support  4.4.3-2   Qt 3 compatibility library for Qt
ii  libqt4-sql 4.4.3-2   Qt 4 SQL module
ii  libqt4-xml 4.4.3-2   Qt 4 XML module
ii  libqtcore4 4.4.3-2   Qt 4 core module
ii  libqtgui4  4.4.3-2   Qt 4 GUI module
ii  libspeex1  1.2~rc1-1 The Speex codec runtime library
ii  libstdc++6 4.3.3-7   The GNU Standard C++ Library v3
ii  libxml22.7.3.dfsg-1  GNOME XML library
ii  libxslt1.1 1.1.24-2  XSLT processing library - runtime
ii  zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime

Versions of packages kopete recommends:
ii  libqca2-plugin-ossl   0.1~20070904-3 QCA OSSL plugin for libqca2

Versions of packages kopete suggests:
ii  kdeartwork-emoticons  4:4.2.2-2  emoticon collections for KDE 4 cha
pn  khelpcenter(no description available)

-- no debconf information




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#484842: unionfs-source: Fails to compile with kernel 2.6.25

[LeJacq, Jean Pierre]

Package: unionfs-source
Version: 2.2.3-2.6.24-1
Severity: grave
Justification: renders package unusable


The following diagnostic message is produced during the build:

  CC [M]  /usr/src/modules/unionfs/inode.o
  /usr/src/modules/unionfs/inode.c: In function 'unionfs_lookup':
  /usr/src/modules/unionfs/inode.c:258: error: 'struct nameidata' has no member 
named 'dentry'
  /usr/src/modules/unionfs/inode.c:259: error: 'struct nameidata' has no member 
named 'mnt'
  /usr/src/modules/unionfs/inode.c:270: error: 'struct nameidata' has no member 
named 'dentry'
  /usr/src/modules/unionfs/inode.c:271: error: 'struct nameidata' has no member 
named 'mnt'
  /usr/src/modules/unionfs/inode.c: In function 'unionfs_permission':
  /usr/src/modules/unionfs/inode.c:864: error: 'struct nameidata' has no member 
named 'dentry'
  /usr/src/modules/unionfs/inode.c:939: error: 'struct nameidata' has no member 
named 'dentry'
  make[4]: *** [/usr/src/modules/unionfs/inode.o] Error 1

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.25-qi.workstation (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash

Versions of packages unionfs-source depends on:
ii  bzip2 1.0.5-0.1  high-quality block-sorting file co
ii  debhelper 7.0.9  helper programs for debian/rules
ii  make  3.81-5 The GNU version of the "make" util
ii  module-assistant  0.10.11.0  tool to make module package creati

Versions of packages unionfs-source recommends:
ii  unionfs-tools 1:0.2.1-1  Tools to manage unionfs filesystem

-- no debconf information




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#484838: sysprof-module-source: Fails to compile with kernel 2.6.25.

[LeJacq, Jean Pierre]

Package: sysprof-module-source
Version: 1.0.10-1
Severity: grave
Justification: renders package unusable


The source fails to compile with kernel 2.6.25. Below are the diagnostic
messages from gcc.


make[4]: Entering directory `/usr/src/linux-source-2.6.25'
  CC [M]  /usr/src/modules/sysprof-module/sysprof-module.o
  /usr/src/modules/sysprof-module/sysprof-module.c: In function ‘timer_notify’:
  /usr/src/modules/sysprof-module/sysprof-module.c:180: error: ‘struct pt_regs’ 
has no member named ‘rip’
  /usr/src/modules/sysprof-module/sysprof-module.c:182: error: ‘struct pt_regs’ 
has no member named ‘rbp’
  /usr/src/modules/sysprof-module/sysprof-module.c:186: error: ‘struct pt_regs’ 
has no member named ‘rsp’
  make[5]: *** [/usr/src/modules/sysprof-module/sysprof-module.o] Error 1


-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.25-qi.workstation (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages sysprof-module-source depends on:
ii  build-essential   11.3   informational list of build-essent
ii  bzip2 1.0.5-0.1  high-quality block-sorting file co
ii  debhelper 7.0.9  helper programs for debian/rules
ii  module-assistant  0.10.11.0  tool to make module package creati

sysprof-module-source recommends no packages.

-- no debconf information



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#473177: libboost-date-time-dev: time_formatters.hpp incorrectly formats fractional seconds using global locale

[LeJacq, Jean Pierre]

Package: libboost-date-time-dev
Version: 1.34.1-9
Severity: important
Tags: patch


The function boost::posix_time::to_iso_string_type() uses the
ostream::operator<<() function to write the time. This later function
will use the current global locale to format each of the elements of
the time. In particular, when the global locale is set to en_US, the
fractional will be formatted to be 123,456 when there are six digits,
which is incorrect.
 
The proposed solution is to temporarily imbue the ostream with the
classic locale to disable formatting. The attached patch only applies
this to the fractional seconds but it would be more robust to apply to
the other time components as well.

This defect has already been reported upstream
http://svn.boost.org/trac/boost/ticket/1726.

This defect is similar to Debian Bug#469771.

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.24-qi.workstation (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages libboost-date-time-dev depends on:
ii  libboost-date-time1.34.1  1.34.1-9   set of date-time libraries based 
o
ii  libboost-dev  1.34.1-9   Boost C++ Libraries development 
fi

libboost-date-time-dev recommends no packages.

-- no debconf information
diff -r -u boost.orig/date_time/posix_time/time_formatters.hpp boost/date_time/posix_time/time_formatters.hpp
--- boost.orig/date_time/posix_time/time_formatters.hpp	2008-03-28 18:27:41.0 -0400
+++ boost/date_time/posix_time/time_formatters.hpp	2008-03-28 18:31:09.0 -0400
@@ -144,6 +144,9 @@
 date_time::absolute_value(td.fractional_seconds());
 #endif
   if (frac_sec != 0) {
+// Temporarily switch to classic locale to prevent possible formatting
+// of frac_sec with comma or other character (for example 123,456).
+ss.imbue(std::locale::classic());
 ss  << "." << std::setw(time_duration::num_fractional_digits())
 << std::setfill(fill_char)
   
@@ -153,6 +156,7 @@
 #else
 << frac_sec;
 #endif
+ss.imbue(std::locale::locale());
   }
 }// else
 return ss.str();

Bug#471000: May be related to upstream ticket 725

[LeJacq, Jean Pierre]

A little more research shows that this bug may have already be addressed by 
the upstream ticket 725.

http://www.cvstrac.org/cvstrac/tktview?tn=725

-- 
JP


signature.asc
Description: This is a digitally signed message part.

Bug#469563: lib32ncurses5-dev: missing libcurses.so symbolic link

[LeJacq, Jean Pierre]

Package: lib32ncurses5-dev
Version: 5.6+20080203-1
Severity: important


The 32bit version of this library does not include the symbolic link
libcurses.so. This symbolic link is provided by the standard package -
libncurses5-dev.

Without this link, compilation of many software packages is not possible.

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.24-qi.workstation (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages lib32ncurses5-dev depends on:
ii  lib32ncurses5 5.6+20080203-1 Shared libraries for terminal hand
ii  libc6-dev-i386 [lib32c-de 2.7-9  GNU C Library: 32bit development l
ii  libncurses5-dev   5.6+20080203-1 Developer's libraries and docs for

lib32ncurses5-dev recommends no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]