Bug#950616: linux-image-5.4.0-3-686-pae: very slow speed for wired ethernet (upload)
Package: src:linux Version: 5.4.13-1 Severity: normal Dear Maintainer, after the latest upgrade, the upload speed with this 32-bit kernel became very slow. Downgrading to kernel linux-image-4.19.0-6-686-pae solves the problem. speed linux-image-5.4.0-3-686-pae 700-750 KB/s speed linux-image-4.19.0-6-686-pae90-95 MB/s Packages r8168-dkms and firmware-realtek are not installed. lsmod |grep r8169 r8169 73728 0 libphy 57344 2 r8169,realtek lshw -class network *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@:04:00.0 logical name: eth0 version: 02 serial: 00:19:99:7e:c1:a1 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 duplex=full ip=131.211.154.187 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:16 ioport:2000(size=256) memory:fc40-fc400fff memory:fc90-fc90 memory:fc42-fc43 *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@:05:00.0 logical name: eth1 version: 02 serial: 00:19:99:7e:de:b4 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 latency=0 link=no multicast=yes port=MII resources: irq:17 ioport:3000(size=256) memory:fc50-fc500fff memory:fca0-fca0 memory:fc52-fc53 -- Package-specific info: ** Version: Linux version 5.4.0-3-686-pae (debian-ker...@lists.debian.org) (gcc version 9.2.1 20200110 (Debian 9.2.1-23)) #1 SMP Debian 5.4.13-1 (2020-01-19) ** Command line: BOOT_IMAGE=/vmlinuz-5.4.0-3-686-pae root=UUID=be578b7d-8d8d-4905-b653-290d1eafa4c3 ro ** Not tainted ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information ** Loaded modules: nfsv3 nfs_acl nfs lockd grace fscache ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nf_tables nfnetlink rfkill snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio joydev snd_hda_intel snd_intel_nhlt coretemp snd_hda_codec kvm snd_hda_core r8169 sg realtek snd_hwdep libphy tpm_infineon snd_pcm_oss tpm_tis serio_raw snd_mixer_oss tpm_tis_core snd_pcm iTCO_wdt irqbypass ppdev iTCO_vendor_support fschmd watchdog snd_timer pcspkr tpm snd parport_pc parport rng_core soundcore evdev acpi_cpufreq sunrpc loop ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic hid_cherry sr_mod sd_mod cdrom hid_generic usbhid hid i915 ata_generic ata_piix libata psmouse scsi_mod lpc_ich mfd_core i2c_i801 video i2c_algo_bit drm_kms_helper ehci_pci uhci_hcd ehci_hcd drm usbcore usb_common button ** Network interface configuration: *** /etc/network/interfaces: auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet static address 131.211.154.187 netmask 255.255.254.0 network 131.211.154.0 broadcast 131.211.155.255 gateway 131.211.154.1 dns-nameservers 131.211.154.162 131.211.154.5 131.211.4.5 dns-search chem.uu.nl ** Network status: *** IP interfaces and addresses: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:19:99:7e:c1:a1 brd ff:ff:ff:ff:ff:ff inet 131.211.154.187/23 brd 131.211.155.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::219:99ff:fe7e:c1a1/64 scope link valid_lft forever preferred_lft forever 3: eth1: mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether 00:19:99:7e:de:b4 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive| Transmit face |bytespackets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth1: 0 0000 0 0 00 0 3200 0 0 0 lo: 4799442146000 0 0 0
Bug#929701: pymol: missing module Pmw
Package: pymol Version: 2.2.0+dfsg-4 Severity: normal Dear Maintainer, during startup of the program pymol we obtain the following warning: No module named 'Pmw' As far as I know, there is no python3 package of Pmw in the debian distribution. I had to install it using pip3. -- System Information: Debian Release: 10.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.19.0-5-amd64 (SMP w/8 CPU cores) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pymol depends on: ii python3-pymol 2.2.0+dfsg-4 Versions of packages pymol recommends: ii apbs 1.4-1+b1 pymol suggests no packages. -- no debconf information
Bug#929700: pymol: Deprecation warning during startup
Package: pymol Version: 2.2.0+dfsg-4 Severity: normal Dear Maintainer, during startup of the program pymol we obtain the following warning: -c:1: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses -- System Information: Debian Release: 10.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.19.0-5-amd64 (SMP w/8 CPU cores) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pymol depends on: ii python3-pymol 2.2.0+dfsg-4 Versions of packages pymol recommends: ii apbs 1.4-1+b1 pymol suggests no packages. -- no debconf information
Bug#920257: python3-fabio: program fails with Nexus data from Diamond Light Source
Package: python3-fabio Version: 0.8.0+dfsg-1 Severity: normal Dear Maintainer, I have tried to reproduce the hdf5 example from the fabio manual on data from the Diamond Light Source and ran into errors. The data can be obtained from https://zenodo.org/record/2529979#.XEhDGpwo_zJ This is what I did: >>> import fabio, h5py >>> h5_file = h5py.File("thaumatin_9_1_master.h5") >>> print(list(h5_file.keys())) ['entry'] >>> print(list(h5_file["entry"].keys())) ['data', 'definition', 'end_time', 'instrument', 'sample', 'start_time'] >>> print(h5_file["entry/data_01"].shape) Traceback (most recent call last): File "", line 1, in File "h5py/_objects.pyx", line 54, in h5py._objects.with_phil.wrapper File "h5py/_objects.pyx", line 55, in h5py._objects.with_phil.wrapper File "/usr/lib/python3/dist-packages/h5py/_hl/group.py", line 177, in __getitem__ oid = h5o.open(self.id, self._e(name), lapl=self._lapl) File "h5py/_objects.pyx", line 54, in h5py._objects.with_phil.wrapper File "h5py/_objects.pyx", line 55, in h5py._objects.with_phil.wrapper File "h5py/h5o.pyx", line 190, in h5py.h5o.open KeyError: "Unable to open object (object 'data_01' doesn't exist)" -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.19.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages python3-fabio depends on: ii libc6 2.28-5 ii python3 3.7.1-3 ii python3-h5py2.8.0-3 ii python3-lxml4.3.0-1 ii python3-matplotlib 3.0.2-2 ii python3-numpy [python3-numpy-abi9] 1:1.16.0-1 ii python3-pil 5.4.1-1 ii python3-pkg-resources 40.6.3-1 ii python3-pyqt5 5.11.3+dfsg-1+b3 ii python3-six 1.12.0-1 python3-fabio recommends no packages. Versions of packages python3-fabio suggests: pn python-fabio-doc -- no debconf information
Bug#918836: ncompress: failure with soft links
Package: ncompress Version: 4.2.4.5-1 Severity: normal Dear Maintainer, the command "compress -dc file.Z > t.t" fails if file.Z is a soft link. The error message is: "file.Z is not a directory or a regular file - ignored". Before the latest update this command worked without problems. -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.19.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages ncompress depends on: ii libc6 2.28-2 ncompress recommends no packages. ncompress suggests no packages. -- no debconf information
Bug#910576: libreoffice-base: in my form, all entries are "input required"
Package: libreoffice-base Version: 1:6.1.2-1 Severity: normal Dear Maintainer, since the last update of libreoffice-base, all entries in my form are suddenly "input required". When saving my changes I get the error message "Error writing to database. Input required in field 'fieldname'. Please enter a value". In the corresponding table, all fields are still on the status "input required" --> no. Saving an entry with empty fields is not a problem, there. The database is mysql which is running on a different computer. -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.18.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages libreoffice-base depends on: ii libc6 2.27-6 ii libgcc1 1:8.2.0-7 ii libreoffice-base-core 1:6.1.2-1 ii libreoffice-base-drivers 1:6.1.2-1 ii libreoffice-core 1:6.1.2-1 ii libstdc++68.2.0-7 ii uno-libs3 6.1.2-1 ii ure 6.1.2-1 Versions of packages libreoffice-base recommends: ii default-jre [java6-runtime] 2:1.10-68 ii libreoffice-java-common 1:6.1.2-1 ii libreoffice-writer 1:6.1.2-1 ii openjdk-10-jre [java6-runtime] 10.0.2+13-1 ii openjdk-8-jre [java6-runtime] 8u171-b11-2 ii openjdk-9-jre [java6-runtime] 9.0.4+12-4 Versions of packages libreoffice-base suggests: pn libreoffice-report-builder pn unixodbc Versions of packages libreoffice-core depends on: ii fontconfig2.13.1-1 ii fonts-opensymbol 2:102.10+LibO6.1.2-1 ii libboost-date-time1.62.0 1.62.0+dfsg-10 ii libboost-locale1.62.0 1.62.0+dfsg-10 ii libc6 2.27-6 ii libcairo2 1.15.12-1 ii libclucene-contribs1v52.3.3.4+dfsg-1 ii libclucene-core1v52.3.3.4+dfsg-1 ii libcmis-0.5-5v5 0.5.1+git20160603-3+b1 ii libcups2 2.2.8-5 ii libcurl3-gnutls 7.61.0-1 ii libdbus-1-3 1.12.10-1 ii libdbus-glib-1-2 0.110-3 ii libdconf1 0.30.0-1 ii libeot0 0.01-5 ii libepoxy0 1.5.2-0.3 ii libexpat1 2.2.6-1 ii libexttextcat-2.0-0 3.4.5-1 ii libfontconfig12.13.1-1 ii libfreetype6 2.8.1-2 ii libgcc1 1:8.2.0-7 ii libglib2.0-0 2.58.1-2 ii libgpgmepp6 1.11.1-1 ii libgraphite2-31.3.12-1 ii libharfbuzz-icu0 1.9.0-1 ii libharfbuzz0b 1.9.0-1 ii libhunspell-1.6-0 1.6.2-1+b1 ii libhyphen02.8.8-5 ii libice6 2:1.0.9-2 ii libicu60 60.2-6 ii libjpeg62-turbo 1:1.5.2-2+b1 ii liblcms2-22.9-3 ii libldap-2.4-2 2.4.46+dfsg-5 ii libmythes-1.2-0 2:1.2.4-3 ii libneon27-gnutls 0.30.2-2 ii libnspr4 2:4.20-1 ii libnss3 2:3.39-1 ii libnumbertext-1.0-0 1.0-3 ii libodfgen-0.1-1 0.1.7-1 ii liborcus-0.13-0 0.14.0+really0.13.4-1 ii libpng16-16 1.6.34-2 ii libpoppler74 0.63.0-2 ii librdf0 1.0.17-1.1 ii libreoffice-common1:6.1.2-1 ii librevenge-0.0-0 0.0.4-6 ii libsm62:1.2.2-1+b3 ii libstdc++68.2.0-7 ii libx11-6 2:1.6.6-1 ii libxext6 2:1.3.3-1+b2 ii libxinerama1 2:1.1.4-1 ii libxml2 2.9.4+dfsg1-7+b1 ii libxmlsec11.2.26-3 ii libxmlsec1-nss1.2.26-3 ii libxrandr22:1.5.1-1 ii libxrender1 1:0.9.10-1 ii libxslt1.11.1.32-2 ii uno-libs3 6.1.2-1 ii ure 6.1.2-1 ii zlib1g1:1.2.11.dfsg-1 Versions of packages libreoffice-core recommends: ii libpaper-utils 1.1.24+nmu5 Versions of packages libreoffice-base is related to: pn libmyodbc ii libmysql-java 5.1.45-1 ii libpostgresql-jdbc-java [libpg-java] 42.2.5-1 pn libsapdbc-java pn libsqliteodbc pn mdbtools pn odbc-postgresql pn tdsodbc pn unixodbc -- no debconf information
Bug#901378: jabref: wrong syntax after import of arxiv reference
Package: jabref Version: 3.8.2+ds-5 Severity: minor Dear Maintainer, with the button "New BibTeX entry" and then "ID-based entry generator" it is possible to import an ArXiv reference. The resulting bibtex entry starts with @Article. The correct syntax would be @Online. (With @Article, jabref complains about an incomplete entry. The journal name is missing.) -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.16.0-2-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages jabref depends on: ii java-wrappers 0.3 ii libandroid-json-java7.0.0+r33-1 ii libantlr3-runtime-java 3.5.2-9 ii libantlr4-runtime-java 4.5.3-2 ii libbcprov-java 1.59-1 ii libcommons-cli-java 1.4-1 ii libcommons-lang3-java 3.7-1 ii libcommons-logging-java 1.2-2 ii libglazedlists-java 1.9.1-2 ii libguava-java 19.0-1 ii libhttpasyncclient-java 4.1.3-1 ii libhttpclient-java 4.5.5-1 ii libhttpmime-java4.5.5-1 ii libjava-string-similarity-java 0.24-1 ii libjempbox-java 1:1.8.13-2 ii libjgoodies-common-java 1.8.1-2 ii libjgoodies-forms-java 1.9.0-3 ii libjgoodies-looks-java 2.7.0-3 ii libjhlabs-filters-java 2.0.235-3 ii libjsoup-java 1.10.2-2 ii liblog4j2-java 2.10.0-2 ii libmicroba-java 1:0.4.4.3-5 ii libpdfbox-java 1:1.8.13-2 ii libreoffice-java-common 1:6.0.5~rc1-2 ii libspin-java1.5+dfsg-8 ii libswing-layout-java1.0.4-4 ii libswingx-java 1:1.6.2-3 ii libunirest-java-java1.4.8-2 Versions of packages jabref recommends: ii libmysql-java5.1.45-1 ii libpostgresql-jdbc-java 42.2.2-4 ii libreoffice-writer 1:6.0.5~rc1-2 ii xdg-utils1.1.3-1 Versions of packages jabref suggests: ii evince [postscript-viewer] 3.28.2-1 ii ghostscript [postscript-viewer] 9.22~dfsg-2.1 ii gv [postscript-viewer] 1:3.7.4-1+b1 pn xpdf | pdf-viewer -- no debconf information
Bug#893615: problem solved
The problem is solved in the latest update. The update included a new version of the package python-zmq, which is now in version 17.0.0-1. I assume that this contained the fix. Best wishes, Martin
Bug#893615: additional information
Perhaps my bug report is related to bug 893474, where similar problems are reported. Best wishes, Martin
Bug#893615: spyder: ipython console does not start
Package: spyder Version: 3.2.6+dfsg1-2 Severity: important Dear Maintainer, when starting spyder, the ipython console does not start. Code cannot be executed. "An error ocurred while starting the kernel" Traceback (most recent call last): File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 268, in main() File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 252, in main kernel.initialize() File "", line 2, in initialize File "/usr/lib/python2.7/dist?packages/traitlets/config/application.py", line 87, in catch_config_error return method(app, *args, **kwargs) File "/usr/lib/python2.7/dist?packages/ipykernel/kernelapp.py", line 452, in initialize zmq_ioloop.install() File "/usr/lib/python2.7/dist?packages/zmq/eventloop/ioloop.py", line 210, in install assert (not ioloop.IOLoop.initialized()) or \ AttributeError: type object 'IOLoop' has no attribute 'initialized' Traceback (most recent call last): File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 268, in main() File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 252, in main kernel.initialize() File "", line 2, in initialize File "/usr/lib/python2.7/dist?packages/traitlets/config/application.py", line 87, in catch_config_error return method(app, *args, **kwargs) File "/usr/lib/python2.7/dist?packages/ipykernel/kernelapp.py", line 452, in initialize zmq_ioloop.install() File "/usr/lib/python2.7/dist?packages/zmq/eventloop/ioloop.py", line 210, in install assert (not ioloop.IOLoop.initialized()) or \ AttributeError: type object 'IOLoop' has no attribute 'initialized' Traceback (most recent call last): File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 268, in main() File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 252, in main kernel.initialize() File "", line 2, in initialize File "/usr/lib/python2.7/dist?packages/traitlets/config/application.py", line 87, in catch_config_error return method(app, *args, **kwargs) File "/usr/lib/python2.7/dist?packages/ipykernel/kernelapp.py", line 452, in initialize zmq_ioloop.install() File "/usr/lib/python2.7/dist?packages/zmq/eventloop/ioloop.py", line 210, in install assert (not ioloop.IOLoop.initialized()) or \ AttributeError: type object 'IOLoop' has no attribute 'initialized' Traceback (most recent call last): File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 268, in main() File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 252, in main kernel.initialize() File "", line 2, in initialize File "/usr/lib/python2.7/dist?packages/traitlets/config/application.py", line 87, in catch_config_error return method(app, *args, **kwargs) File "/usr/lib/python2.7/dist?packages/ipykernel/kernelapp.py", line 452, in initialize zmq_ioloop.install() File "/usr/lib/python2.7/dist?packages/zmq/eventloop/ioloop.py", line 210, in install assert (not ioloop.IOLoop.initialized()) or \ AttributeError: type object 'IOLoop' has no attribute 'initialized' Traceback (most recent call last): File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 268, in main() File "/usr/lib/python2.7/dist?packages/spyder/utils/ipython/start_kernel.py", line 252, in main kernel.initialize() File "", line 2, in initialize File "/usr/lib/python2.7/dist?packages/traitlets/config/application.py", line 87, in catch_config_error return method(app, *args, **kwargs) File "/usr/lib/python2.7/dist?packages/ipykernel/kernelapp.py", line 452, in initialize zmq_ioloop.install() File "/usr/lib/python2.7/dist?packages/zmq/eventloop/ioloop.py", line 210, in install assert (not ioloop.IOLoop.initialized()) or \ AttributeError: type object 'IOLoop' has no attribute 'initialized' -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.14.0-3-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages spyder depends on: ii python 2.7.14-4 ii python-spyder 3.2.6+dfsg1-2 ii python2.7 2.7.14-7 spyder recommends no packages. spyder suggests no packages. Versions of packages python-spyder depends on: ii libjs-jquery3.2.1-1 ii libjs-mathjax 2.7.3+dfsg-1 ii pylint 1.8.1-1 ii python 2.7.14-4 ii python-chardet 3.0.4-1 ii python-cloudpickle 0.5.2-2 ii python-jedi 0.11.1-1 ii python-nbconvert5.3.1-1 ii python-numpydoc 0.7.0-1 ii python-pickleshare 0.7.4-2 ii python-psutil 5.4.2-1 ii python-pycodestyle 2.3.1-2 ii python-pyflakes 1.6.0-1 ii python-pygments 2.2.0+dfsg-1 ii python-qtawesome
Bug#887594: update of package "blt" fixes the problem
This bug is obviously related to bug report 18. Updating the package "blt" to version 2.5.3+dfsg-4 fixes the problem.
Bug#887594: python-tk: segfault in pmw
Package: python-tk Version: 2.7.14-1 Severity: normal Dear Maintainer, if I execute the example program /usr/share/doc/python-pmw-doc/examples/Dialog.py and klick on the buttons, the programs ends in a segmentation fault. (The example is part of the Debian package python-pmw-doc). This situation occurs with python-tk version 2.7.14-1, but not with version 2.7.13-1. We could pinpoint the problem to the module /usr/share/pyshared/Pmw/Pmw_1_3/lib/PmwBlt.py and the segmentation fault happens within the following python function: def busy_hold(window, cursor = None): _loadBlt(window) if cursor is None: window.tk.call(_busyCommand, 'hold', window._w) else: window.tk.call(_busyCommand, 'hold', window._w, '-cursor', cursor) I am not sure if this related to the very old bug report 524149. -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.14.0-2-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages python-tk depends on: ii blt 2.5.3+dfsg-3 ii libc6 2.26-2 ii libtcl8.6 8.6.8+dfsg-2 ii libtk8.6 8.6.8-2 ii libx11-6 2:1.6.4-3 ii python2.7.14-4 ii tk8.6-blt2.5 2.5.3+dfsg-3 python-tk recommends no packages. Versions of packages python-tk suggests: pn python-tk-dbg pn tix -- no debconf information
Bug#872418: additional information
in addition to my bug report. If I press the right mouse button in the main window, then About --> Jmol --> http://www.jmol.org the following message appears: Java 6 Desktop.browse() capability unavailable. Could not open http://www.jmol.org
Bug#872418: jmol: Weblinks in Help do not work
Package: jmol Version: 14.6.4+2016.11.05+dfsg1-3 Severity: normal Dear Maintainer, the weblinks in the Help of Jmol do not work. They should start a webbrowser and display the help pages. In my case, nothing happens when I click on the weblinks. Help --> Jmol Wiki Help --> About Jmol --> several weblinks (I am working on an xfce desktop) -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.11.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages jmol depends on: ii default-jre 2:1.8-59 ii libjmol-java 14.6.4+2016.11.05+dfsg1-3 jmol recommends no packages. jmol suggests no packages. -- no debconf information
Bug#866203: shelxle: upstream info has changed
Package: shelxle Version: 1.0.816-1 Severity: minor Dear Maintainer, the upstream website for the program has changed. The new site is: https://www.shelxle.org -- System Information: Debian Release: 9.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-3-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages shelxle depends on: ii libc6 2.24-11+deb9u1 ii libgcc1 1:6.3.0-18 ii libgl1-mesa-glx [libgl1] 13.0.6-1+b2 ii libglu1-mesa [libglu1]9.0.0-2.1 ii libgomp1 6.3.0-18 ii libqt4-network4:4.8.7+dfsg-11 ii libqt4-opengl 4:4.8.7+dfsg-11 ii libqtcore44:4.8.7+dfsg-11 ii libqtgui4 4:4.8.7+dfsg-11 ii libstdc++66.3.0-18 shelxle recommends no packages. shelxle suggests no packages. -- no debconf information
Bug#857351: jabref: permissions of bib-file
Package: jabref Version: 3.8.1+ds-3 Severity: minor Dear Maintainer, bib-files that are newly created in jabref have the permissions 777 (rwxrwxrwx). Because these are pure text files, they should not be executable. DEBUG_WRAPPER=1 jabref --debug [debug] /usr/bin/jabref: Found JAVA_HOME = '/usr/lib/jvm/java-8-openjdk-amd64' [debug] /usr/bin/jabref: Found JAVA_CMD = '/usr/lib/jvm/java-8-openjdk-amd64/bin/java' [debug] /usr/bin/jabref: Environment variable CLASSPATH is '' [debug] /usr/bin/jabref: Runnning /usr/lib/jvm/java-8-openjdk-amd64/bin/java -classpath /usr/share/java/jabref.jar:/usr/share/java/bcprov.jar:/usr/share/java/antlr3-runtime.jar:/usr/share/java/antlr4-runtime.jar:/usr/share/java/com.android.json.jar:/usr/share/java/commons-cli.jar:/usr/share/java/commons-codec.jar:/usr/share/java/commons-lang3.jar:/usr/share/java/commons-logging.jar:/usr/share/java/fontbox.jar:/usr/share/java/glazedlists.jar:/usr/share/java/guava.jar:/usr/share/java/httpasyncclient.jar:/usr/share/java/httpclient.jar:/usr/share/java/httpcore.jar:/usr/share/java/httpcore-nio.jar:/usr/share/java/httpmime.jar:/usr/share/java/java-string-similarity.jar:/usr/share/java/jempbox.jar:/usr/share/java/jgoodies-common.jar:/usr/share/java/jgoodies-forms.jar:/usr/share/java/jgoodies-looks.jar:/usr/share/java/jhlabs-filters.jar:/usr/share/java/jsoup.jar:/usr/share/java/juh.jar:/usr/share/java/jurt.jar:/usr/share/java/log4j-api.jar:/usr/share/java/log4j-core.jar:/usr/share/j ava/log4j-jcl.jar:/usr/share/java/microba.jar:/usr/share/java/mysql-connector-java.jar:/usr/share/java/pdfbox.jar:/usr/share/java/postgresql.jar:/usr/share/java/ridl.jar:/usr/share/java/spin.jar:/usr/share/java/swingx.jar:/usr/share/java/swing-layout.jar:/usr/share/java/unirest-java.jar:/usr/share/java/unoil.jar net.sf.jabref.JabRefMain --debug dpkg -l "openjdk*" ||/ Name Version Architecture Description +++-=-=-=- un openjdk-6-jre (no description available) un openjdk-6-jre-headless (no description available) un openjdk-7-jre (no description available) un openjdk-7-jre-headless (no description available) ii openjdk-8-jre:amd64 8u121-b13-3 amd64 OpenJDK Java runtime, using Hotspot JIT ii openjdk-8-jre-headless:amd64 8u121-b13-3 amd64 OpenJDK Java runtime, using Hotspot JIT (headless) -- System Information: Debian Release: 9.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages jabref depends on: ii default-jre [java8-runtime] 2:1.8-58 ii java-wrappers 0.1.28 ii libandroid-json-java7.0.0+r3-1 ii libantlr3-runtime-java 3.5.2-6 ii libantlr4-runtime-java 4.5.3-1 ii libbcprov-java 1.56-1 ii libcommons-cli-java 1.3.1-3 ii libcommons-lang3-java 3.5-1 ii libcommons-logging-java 1.2-1 ii libglazedlists-java 1.9.1-2 ii libguava-java 19.0-1 ii libhttpasyncclient-java 4.1.2-1 ii libhttpclient-java 4.5.2-2 ii libhttpmime-java4.5.2-2 ii libjava-string-similarity-java 0.19-1 ii libjempbox-java 1:1.8.12-1 ii libjgoodies-common-java 1.8.1-2 ii libjgoodies-forms-java 1.9.0-3 ii libjgoodies-looks-java 2.7.0-2 ii libjhlabs-filters-java 2.0.235-3 ii libjsoup-java 1.10.2-1 ii liblog4j2-java 2.7-1 ii libmicroba-java 1:0.4.4.3-5 ii libpdfbox-java 1:1.8.12-1 ii libreoffice-java-common 1:5.2.5-2 ii libspin-java1.5+dfsg-8 ii libswing-layout-java1.0.4-4 ii libswingx-java 1:1.6.2-2 ii libunirest-java-java1.4.8-2 ii openjdk-8-jre [java8-runtime] 8u121-b13-3 Versions of packages jabref recommends: ii libmysql-java5.1.40-1 ii libpostgresql-jdbc-java 9.4.1212-1 ii libreoffice-writer 1:5.2.5-2 ii xdg-utils1.1.1-1 Versions of packages jabref suggests: ii evince [postscript-viewer] 3.22.1-3 ii ghostscript [postscript-viewer] 9.20~dfsg-2 ii gv [postscript-viewer] 1:3.7.4-1+b1 pn xpdf | pdf-viewer -- no debconf information
Bug#853837: drawxtl: wrong path
Package: drawxtl Version: 5.5-3+b1 Severity: normal Dear Maintainer, if the configuration file ~/.drawxtlrc does not exist, it will be newly generated by the program and will contain the line: /usr/share/povray/include/colors.inc Starting the program povray from within drawxtl will then fail because the file "colors.inc" is not found. The correct path on a debian installation using the package "povray-includes" should be: /usr/share/povray-3.7/include/colors.inc -- System Information: Debian Release: 9.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages drawxtl depends on: ii libc6 2.24-8 ii libfltk1.11.1.10-22+b1 ii libgl1-mesa-glx [libgl1] 13.0.3-1 ii libgl2ps1 1.3.9-4 ii libglu1-mesa [libglu1]9.0.0-2.1 ii libstdc++66.3.0-5 ii libxpm4 1:3.5.12-1 drawxtl recommends no packages. Versions of packages drawxtl suggests: pn openvrml-lookat -- no debconf information
Bug#853829: drawxtl: SEGFAULT when leaving the program
Package: drawxtl Version: 5.5-3+b1 Severity: normal Dear Maintainer, when I change parameters in drawxtl and then leave the program, a dialog window appears where I can save the changes. Selecting "save" leads to a SEGFAULT. Example: switch on/off the edges of the unit cell. The last statements in strace are: open("l0873a.tmp", O_RDONLY)= 13 open("l0873a.tmpa", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 14 fstat(13, {st_mode=S_IFREG|0644, st_size=1524, ...}) = 0 read(13, "title l0873a\ncell 8.6618 16.2610"..., 4096) = 1524 fstat(14, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 read(13, "", 4096) = 0 close(13) = 0 write(14, "title l0873a\ncell 8.6618 16.2610"..., 1524) = 1524 close(14) = 0 unlink("l0873a.str")= 0 rename("l0873a.tmpa", "l0873a.str") = 0 open("/home/lutz/.drawxtlrc", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 13 fstat(13, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 write(13, "\n/usr/bin/povray\n\n\n\n+W600 +H600 "..., 230) = 230 close(13) = 0 unlink("l0873a.frm1") = 0 unlink("l0873a.save") = -1 ENOENT (No such file or directory) unlink("l0873a.tmp")= 0 unlink("l0873a.cns")= 0 --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=NULL} --- +++ killed by SIGSEGV +++ -- System Information: Debian Release: 9.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages drawxtl depends on: ii libc6 2.24-8 ii libfltk1.11.1.10-22+b1 ii libgl1-mesa-glx [libgl1] 13.0.3-1 ii libgl2ps1 1.3.9-4 ii libglu1-mesa [libglu1]9.0.0-2.1 ii libstdc++66.3.0-5 ii libxpm4 1:3.5.12-1 drawxtl recommends no packages. Versions of packages drawxtl suggests: pn openvrml-lookat -- no debconf information
Bug#846918: interface opens, but no menus and no action on button clicks
Package: jabref Version: 2.10+ds-7 Followup-For: Bug #846918 Dear Maintainer, after an update yesterday, jabref fails to start. ERROR while starting or running JabRef: java.lang.NoSuchFieldError: DIALOG Searching through the debian bug list, I find bug 846503 with a similar problem. I looked through my updated package list, and these packages were updated yesterday (among others): libgcj-common libgcj17 gcj-6-jre-lib libglazedlists-java libjgoodies-common-java jabref libjgoodies-forms-java libjgoodies-looks-java libmicroba-java libbcprov-java libbcpkix-java libbcmail-java libgcj-bc Here is the full output during jabref startup: log4j:WARN No appenders could be found for logger (org.java.plugin.ObjectFactory). log4j:WARN Please initialize the log4j system properly. log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more info. Found 2 plugin(s): - net.sf.jabref.export.misq (jar:file:/usr/share/jabref/JabRef-2.10.jar!/plugins/net.sf.jabref.export.misq/plugin.xml) - net.sf.jabref.core (jar:file:/usr/share/jabref/JabRef-2.10.jar!/plugins/net.sf.jabref.core/plugin.xml) Opening: /home/lutz/ZnSal/ZnSal.bib Opening: /home/lutz/Fe-salicylate/Fe-salicylate.bib Opening: /home/lutz/CuSal/CuSal.bib Could not get key binding for "Open folder" ERROR while starting or running JabRef: java.lang.NoSuchFieldError: DIALOG at net.sf.jabref.gui.CleanUpAction.initOptionsPanel(CleanUpAction.java:140) at net.sf.jabref.gui.CleanUpAction.(CleanUpAction.java:112) at net.sf.jabref.BasePanel.setupActions(BasePanel.java:348) at net.sf.jabref.BasePanel.init(BasePanel.java:276) at net.sf.jabref.BasePanel.(BasePanel.java:257) at net.sf.jabref.JabRefFrame.addTab(JabRefFrame.java:1745) at net.sf.jabref.JabRefFrame.addParserResult(JabRefFrame.java:1502) at net.sf.jabref.JabRef.openWindow(JabRef.java:790) at net.sf.jabref.JabRef.(JabRef.java:201) at net.sf.jabref.JabRef.main(JabRef.java:84) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:498) at net.sf.jabref.JabRefMain.main(Unknown Source) Please first check if this problem and a solution is already known. Find our... * ...FAQ at http://jabref.sf.net/faq.php and our... * ...user mailing-list at http://sf.net/mailarchive/forum.php?forum_name=jabref-users If you do not find a solution there, please let us know about the problem by writing a bug report. You can find our bug tracker at http://sourceforge.net/p/jabref/bugs/ * If the bug has already been reported there, please add your comments to the existing bug. * If the bug has not been reported yet, then we need the complete error message given above and a description of what you did before the error occured. We also need the following information (you can copy and paste all this): * Java Version: 1.8.0_111 * Java Vendor: Oracle Corporation * Operating System: Linux (4.7.0-1-amd64) * Hardware Architecture: amd64 We are sorry for the trouble and thanks for reporting problems with JabRef! -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.7.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages jabref depends on: ii antlr 2.7.7+dfsg-7 ii antlr3 3.5.2-6 ii default-jre [java6-runtime]2:1.8-57 ii java-wrappers 0.1.28 ii libcommons-logging-java1.2-1 ii libglazedlists-java1.9.1-2 ii libjempbox-java1:1.8.12-1 ii libjgoodies-common-java1.8.1-2 ii libjgoodies-forms-java 1.9.0-3 ii libjgoodies-looks-java 2.7.0-2 ii libjpf-java1.5.1+dfsg-4 ii libjpfcodegen-java 0.4+dfsg1-1 ii libmicroba-java1:0.4.4.3-5 ii libmysql-java 5.1.40-1 ii libpdfbox-java 1:1.8.12-1 ii libpostgresql-jdbc-java9.2-1002-1 ii libspin-java 1.5+dfsg-8 ii openjdk-8-jre [java6-runtime] 8u111-b14-3 ii velocity 1.7-5 Versions of packages jabref recommends: ii libreoffice-java-common 1:5.2.3-2 ii libreoffice-writer 1:5.2.3-2 ii xdg-utils1.1.1-1 Versions of packages jabref suggests: ii evince [postscript-viewer] 3.22.1-2 ii ghostscript [postscript-viewer] 9.20~dfsg-1 ii gv [postscript-viewer] 1:3.7.4-1 pn xpdf-reader | pdf-viewer -- no debconf information
Bug#835185: mysql-workbench: Segfault when opening connection
The same problem here. On 6-Sep-2016 I updated libmysqlcppconn7v5 (sid), which solved the problem with Segfault. On 16-Sep-2016 I updated libreoffice (stretch) and the connection to the mysql server crashes again with SIGSEGV. Here is gdbtrace.log: warning: Currently logging to gdbtrace.log. Turn the logging off and on to make the new setting effective. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". [New Thread 0x7fffe11a3700 (LWP 7867)] [New Thread 0x7fffdd17d700 (LWP 7868)] [New Thread 0x7fffdc97c700 (LWP 7869)] [New Thread 0x7fffd70e8700 (LWP 7870)] [New Thread 0x7fffd68e7700 (LWP 7871)] [New Thread 0x7fffd5754700 (LWP 7872)] [New Thread 0x7fffc3fff700 (LWP 7873)] [New Thread 0x7fffc37fe700 (LWP 7874)] [New Thread 0x7fffc2ffd700 (LWP 7877)] [Thread 0x7fffc2ffd700 (LWP 7877) exited] [Thread 0x7fffc37fe700 (LWP 7874) exited] [New Thread 0x7fffc37fe700 (LWP 7878)] [Thread 0x7fffdd17d700 (LWP 7868) exited] Thread 1 "soffice.bin" received signal SIGSEGV, Segmentation fault. 0x in ?? () #0 0x in ?? () #1 0x7fffc09d1464 in ?? () from /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/mysqlc.uno.so #2 0x7fffc09d249a in ?? () from /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/mysqlc.uno.so #3 0x7fffc09b3769 in ?? () from /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/mysqlc.uno.so #4 0x7fffd4798f85 in ?? () from /usr/lib/libreoffice/program/../program/libdbalo.so #5 0x7fffd479bf1d in ?? () from /usr/lib/libreoffice/program/../program/libdbalo.so #6 0x7fffd47da532 in ?? () from /usr/lib/libreoffice/program/../program/libdbalo.so #7 0x7fffd47daa50 in ?? () from /usr/lib/libreoffice/program/../program/libdbalo.so #8 0x7fffd47dae4a in ?? () from /usr/lib/libreoffice/program/../program/libdbalo.so #9 0x7fffd47db401 in ?? () from /usr/lib/libreoffice/program/../program/libdbalo.so #10 0x7fffd47dbdcf in ?? () from /usr/lib/libreoffice/program/../program/libdbalo.so #11 0x7fffc2421f7d in ?? () from /usr/lib/libreoffice/program/../program/libdbulo.so #12 0x7fffc242373e in ?? () from /usr/lib/libreoffice/program/../program/libdbulo.so #13 0x7fffc23436f0 in dbaui::OGenericUnoController::connect(rtl::OUString const&, rtl::OUString const&, dbtools::SQLExceptionInfo*) () from /usr/lib/libreoffice/program/../program/libdbulo.so #14 0x7fffc22e039f in ?? () from /usr/lib/libreoffice/program/../program/libdbulo.so #15 0x7fffc22cbfd7 in ?? () from /usr/lib/libreoffice/program/../program/libdbulo.so #16 0x7fffc22feedf in ?? () from /usr/lib/libreoffice/program/../program/libdbulo.so #17 0x7578c5ed in ?? () from /usr/lib/libreoffice/program/libmergedlo.so #18 0x7578c712 in ?? () from /usr/lib/libreoffice/program/libmergedlo.so #19 0x75791088 in ?? () from /usr/lib/libreoffice/program/libmergedlo.so #20 0x75794c28 in SvtIconChoiceCtrl::MouseButtonDown(MouseEvent const&) () from /usr/lib/libreoffice/program/libmergedlo.so #21 0x7636a8e3 in ?? () from /usr/lib/libreoffice/program/libmergedlo.so #22 0x7636c1f6 in ?? () from /usr/lib/libreoffice/program/libmergedlo.so #23 0x7fffdff21b2d in ?? () from /usr/lib/libreoffice/program/libvclplug_gtklo.so #24 0x7fffdf9b299c in ?? () from /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0 #25 0x71483f85 in g_closure_invoke () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 #26 0x71495f92 in ?? () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 #27 0x7149e68f in g_signal_emit_valist () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 #28 0x7149efcf in g_signal_emit () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 #29 0x7fffdfaca31c in ?? () from /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0 #30 0x7fffdf9b1134 in gtk_propagate_event () from /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0 #31 0x7fffdf9b14eb in gtk_main_do_event () from /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0 #32 0x7fffdf625c9c in ?? () from /usr/lib/x86_64-linux-gnu/libgdk-x11-2.0.so.0 #33 0x711ac697 in g_main_context_dispatch () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #34 0x711ac900 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #35 0x711ac9ac in g_main_context_iteration () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #36 0x7fffdff058a3 in ?? () from /usr/lib/libreoffice/program/libvclplug_gtklo.so #37 0x7654e8b1 in Application::Yield() () from /usr/lib/libreoffice/program/libmergedlo.so #38 0x76550d25 in Application::Execute() () from /usr/lib/libreoffice/program/libmergedlo.so #39 0x7562fbfc in ?? () from /usr/lib/libreoffice/program/libmergedlo.so #40 0x765545b6 in ?? () from /usr/lib/libreoffice/program/libmergedlo.so #41 0x765546b2 in SVMain() () from
Bug#833532: Rebuild against libicu57 causes icedove to crash
On Tue, 09 Aug 2016 09:14:00 + =?UTF-8?B?VmlrdG9yIErDpGdlcnNrw7xwcGVy?=wrote: In case anyone is not able to use a version prior to 1:45.2.0-2+b1, and since this version is in testing now, I tried a workaround and set "javascript.options.baselinejit" to "false" in about:config. This worked for me so far. This workaround solves my problems as well. Iceowl-extension works fine. calendar-google-provider is not installed.
Bug#801093: povray: dependency problem
Package: povray Version: 1:3.7.0.0-8+b1 Severity: normal Dear Maintainer, installation of povray is impossible because of dependency problems. # apt-get install povray Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: povray : Depends: libilmbase6v5 (>= 1.0.1) but it is not going to be installed Depends: libopenexr6v5 (>= 1.6.1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 4.2.0-1-686-pae (SMP w/4 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages povray depends on: pn libboost-system1.55.0 pn libboost-thread1.55.0 ii libc6 2.19-22 ii libgcc11:5.2.1-17 ii libilmbase61.0.1-6.1 ii libjpeg8 8d1-2 ii libopenexr61.6.1-8 ii libpng12-0 1.2.50-2+b2 ii libsdl1.2debian1.2.15-11 ii libstdc++6 5.2.1-17 ii libtiff5 4.0.5-1 ii zlib1g 1:1.2.8.dfsg-2+b1 Versions of packages povray recommends: pn povray-includes Versions of packages povray suggests: ii povray-doc 1:3.6.1-12 pn povray-examples
Bug#751767: partially solved
updating the package python-tk to version 2.7.7-2 solves the import error. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#752548: python-matplotlib: Segmentation fault in show()
Package: python-matplotlib Version: 1.3.1-1+b2 Severity: important Dear Maintainer, the update of package python-tk to version 2.7.7-2 solves the import error of matplotlib (Debian bug 751767) but gives a segmentation fault in matplotlib: import matplotlib.pyplot as plt plt.plot([0,1],[0,1]) plt.show() Segmentation fault -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 3.14-1-686-pae (SMP w/4 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages python-matplotlib depends on: ii libatk1.0-0 2.12.0-1 ii libc6 2.19-3 ii libcairo2 1.12.16-2 ii libfontconfig12.11.0-5 ii libfreetype6 2.5.2-1 ii libgcc1 1:4.9.0-7 ii libgdk-pixbuf2.0-02.30.7-1 ii libglib2.0-0 2.40.0-3 ii libgtk2.0-0 2.24.23-1 ii libpango-1.0-01.36.3-1 ii libpangocairo-1.0-0 1.36.3-1 ii libpangoft2-1.0-0 1.36.3-1 ii libpng12-01.2.50-1 ii libstdc++64.9.0-7 ii libtcl8.5 8.5.15-4 ii libtk8.5 8.5.15-4 ii python2.7.6-2 ii python-dateutil 1.5+dfsg-1 ii python-matplotlib-data1.3.1-1 ii python-numpy [python-numpy-abi9] 1:1.8.1-1+b1 ii python-pyparsing 2.0.2+dfsg1-1 ii python-support1.0.15 ii python-tz 2012c-1 Versions of packages python-matplotlib recommends: ii python-glade2 2.24.0-3+b1 ii python-imaging 2.4.0-2 ii python-tk 2.7.7-2 Versions of packages python-matplotlib suggests: ii dvipng 1.14-2 ii ghostscript9.05~dfsg-8.1 ii gir1.2-gtk-3.0 3.12.2-1+b1 ii inkscape 0.48.4-5 ii ipython2.1.0-1 ii librsvg2-common2.40.2-1 ii python-cairo 1.8.8-1+b2 ii python-configobj 4.7.2+ds-5 pn python-excelerator none ii python-gobject 3.12.1-1 ii python-gtk22.24.0-3+b1 pn python-matplotlib-doc none pn python-nosenone ii python-qt4 4.11+dfsg-2 ii python-scipy 0.13.3-2+b1 ii python-sip 4.16.1+dfsg-1 pn python-tornado none pn python-traits none ii python-wxgtk2.82.8.12.1+dfsg2-1 ii texlive-extra-utils2014.20140528-2 ii texlive-latex-extra2014.20140528-2 pn ttf-staypuft none -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#751767: blt and Tkinter
import Tkinter gives the traceback: File t.py, line 1, in module import Tkinter File /usr/lib/python2.7/lib-tk/Tkinter.py, line 42, in module raise ImportError, str(msg) + ', please install the python-tk package' ImportError: libBLT.2.4.so.8.5: cannot open shared object file: No such file or directory, please install the python-tk package -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#751767: blt breaks python-matplotlib
Package: blt Version: 2.4z-9 Severity: important Dear Maintainer, after upgrading blt to version 2.4z-9 the package python-matplotlib becomes unusable. My program t.py contains one single line: import matplotlib.pylab as plt Running the program gives the following traceback: File t.py, line 1, in module import matplotlib.pylab as plt File /usr/lib/pymodules/python2.7/matplotlib/pylab.py, line 269, in module from matplotlib.pyplot import * File /usr/lib/pymodules/python2.7/matplotlib/pyplot.py, line 98, in module _backend_mod, new_figure_manager, draw_if_interactive, _show = pylab_setup() File /usr/lib/pymodules/python2.7/matplotlib/backends/__init__.py, line 28, in pylab_setup globals(),locals(),[backend_name],0) File /usr/lib/pymodules/python2.7/matplotlib/backends/backend_tkagg.py, line 8, in module import Tkinter as Tk, FileDialog File /usr/lib/python2.7/lib-tk/Tkinter.py, line 42, in module raise ImportError, str(msg) + ', please install the python-tk package' ImportError: libBLT.2.4.so.8.5: cannot open shared object file: No such file or directory, please install the python-tk package Note 1: the package python-tk is already installed. Note 2: currently, there is the file /usr/lib/libBLT.2.4.so.8.6 -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 3.14-1-686-pae (SMP w/4 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages blt depends on: ii libc6 2.19-1 ii libtcl8.6 8.6.1-6 ii libtk8.6 8.6.1-5 ii libx11-6 2:1.6.2-2 blt recommends no packages. Versions of packages blt suggests: pn blt-demo none -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#621073: libreoffice-mysql-connector: registration fails during install
Thank you for resetting the severity. I indeed think that this bug breaks the installation of the package. (reportbug did not allow me to assign the severity to serious.) I am not aware of problems with my filesystem. The problem can not be solved by completely removing and purging libreoffice and then start a clean installation. Best wishes, Martin On 04/12/2011 12:08 PM, Rene Engelhard wrote: severity 621073 serious tag 621073 + unreproducible tag 621073 + moreinfo thanks Hi, On Wed, Apr 06, 2011 at 11:30:03AM +0200, Martin Lutz wrote: ERROR: (com.sun.star.deployment.DeploymentException) { { Message = An error occurred while enabling: mysqlc.uno.so, Context = (com.sun.star.uno.XInterface) @9c64938 }, Cause = (any) { (com.sun.star.registry.CannotRegisterImplementationException) { { Message = loading component library failed: file:///usr/lib/libreoffice/program/../share/extensions/mysql-connector-ooo/mysqlc.uno.so, Context = (com.sun.star.uno.XInterface) @0 } } } } rollback... rollback finished. I don't believe this is a bug in the package: http://packages.debian.org/wheezy/i386/libreoffice-mysql-connector/filelist: /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/META-INF/manifest.xml /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/description.xml /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/description/description_en-US.txt /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/images/extension_32.png /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/images/extension_32_h.png /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/mysqlc.uno.so ^^^ /usr/lib/libreoffice/share/extensions/mysql-connector-ooo/registry/data/org/openoffice/Office/DataAccess/Drivers.xcu /usr/share/bug/libreoffice-mysql-connector/presubj /usr/share/bug/libreoffice-mysql-connector/script /usr/share/doc/libreoffice-mysql-connector/NEWS.gz /usr/share/doc/libreoffice-mysql-connector/README.Debian.gz /usr/share/doc/libreoffice-mysql-connector/README_en-US.gz /usr/share/doc/libreoffice-mysql-connector/changelog.Debian.gz /usr/share/doc/libreoffice-mysql-connector/copyright /usr/share/lintian/overrides/libreoffice-mysql-connector I bet you have a filesystem problem, some corrupted install and/or a corrupted extension registry. (But why did you file it as important, I mean, if t his was a real bug it would break install of the package - serious. Resetting the severity, but tagging it accordingly. Note that I will *NOT* look at this.) Grüße/Regards, René -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#621073: libreoffice-mysql-connector: registration fails during install
Package: libreoffice-mysql-connector Version: 1.0.1+LibO3.3.1-1 Severity: important apt-get install libreoffice-mysql-connector Unpacking libreoffice-mysql-connector (from .../libreoffice-mysql-connector_1.0.1+LibO3.3.1-1_i386.deb) ... Processing triggers for libreoffice-common ... Synchronizing repository for shared extensions Synchronizing repository for bundled extensions Enabling: MySQL Connector Enabling: mysqlc.uno.so ERROR: (com.sun.star.deployment.DeploymentException) { { Message = An error occurred while enabling: mysqlc.uno.so, Context = (com.sun.star.uno.XInterface) @9c64938 }, Cause = (any) { (com.sun.star.registry.CannotRegisterImplementationException) { { Message = loading component library failed: file:///usr/lib/libreoffice/program/../share/extensions/mysql-connector-ooo/mysqlc.uno.so, Context = (com.sun.star.uno.XInterface) @0 } } } } rollback... rollback finished. unopkg done. -- Package-specific info: -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libreoffice-mysql-connector depends on: ii libc6 2.11.2-11 Embedded GNU C Library: Shared lib ii libgcc11:4.5.2-4 GCC support library ii libmysqlclient16 5.1.49-3 MySQL database client library ii libmysqlcppconn5 1.1.0-2 MySQL Connector for C++ (library) ii libreoffice-core 1:3.3.1-1 office productivity suite -- arch- ii libstdc++6 4.5.2-4 The GNU Standard C++ Library v3 ii libstlport4.6ldbl 4.6.2-7 STLport C++ class library ii ure1.7.0+LibO3.3.1-1 LibreOffice UNO runtime environmen libreoffice-mysql-connector recommends no packages. Versions of packages libreoffice-mysql-connector suggests: pn mysql-server none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#531319: splix: printing from acroread fails
The printer in my bug message was a ML-2010. But I also can't reproduce the bug today. Best wishes, Martin On 03/04/2011 11:10 PM, Luca Niccoli wrote: tag 531319 +moreinfo thank you Hi Martin, Soenke, you submitted a bug report to against splix to debian some time ago. [0] I tried to reproduce it, both with acroread and using the command Soenke posted, but failed (i.e. it printed fine). Could you please try again with an up-to-date system? Splix hasn't been updated in the meanwhile, but cups has... Martin, could you tell me with which printer you hit the bug? Thanks, Luca [0] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=531319 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#610771: python-scitools: unrecognized option for gnuplot
Package: python-scitools Version: 0.7-1 Severity: normal Example code: from scitools.std import * t=linspace(0, 1, 100) y=t plot(t, y) Behaviour: scitools.easyviz backend is gnuplot gnuplot set missing nan ^ line 0: Unrecognized option. See 'help set'. -- System Information: Debian Release: 6.0 APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages python-scitools depends on: ii python 2.6.6-3+squeeze5 interactive high-level object-orie ii python-gnuplot 1.8-1.1 A Python interface to the gnuplot ii python-numpy1:1.4.1-5Numerical Python adds a fast array ii python-support 1.0.10 automated rebuilding support for P Versions of packages python-scitools recommends: ii imagemagick8:6.6.0.4-3 image manipulation programs pn python-scientific none(no description available) ii python-scipy 0.7.2+dfsg1-1 scientific tools for Python Versions of packages python-scitools suggests: ii blt 2.4z-4.2 the BLT extension library for Tcl/ pn ffmpegnone (no description available) pn netpbmnone (no description available) pn octave3.0 | octave3.2 none (no description available) ii python-matplotlib 0.99.3-1 Python based plotting system in a ii python-pmw1.3.2-5Pmw -- Python MegaWidgets pn python-pyxnone (no description available) ii python-tk 2.6.6-1Tkinter - Writing Tk applications pn python-vtknone (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#586781: /usr/bin/jabref outputs warning if openjdk6 is missing
Package: jabref Version: 2.6+ds-2 Severity: minor the startup script /usr/bin/jabref contains the line find_java_runtime openjdk6 || find_java_runtime sun6 if the first find_java_runtime fails, a warning is given, even if the second part is successful (sun6 is installed). The warning is confusing: [warning] /usr/bin/jabref: No java runtime was found -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages jabref depends on: ii antlr 2.7.7-16 language tool for constructing rec ii antlr33.0.1+dfsg-4 language tool for constructing rec ii java-wrappers 0.1.16 wrappers for java executables ii libcommons-logging-java 1.1.1-8commmon wrapper interface for seve ii libglazedlists-java 1.8.0.dfsg-2 java list transformation library ii libjempbox-java 0.2.0.dfsg-1 XMP Compatible Java Library ii libjgoodies-forms-java1.3.0-1Framework to lay out and implement ii libjgoodies-looks-java2.3.1-1library with Swing lookfeel imple ii libjpf-java 1.5.1+dfsg-1 Java Plugin Framework: plug-in inf ii libjpfcodegen-java0.4+dfsg-1 tool for generating classes from J ii libmicroba-java 1:0.4.4.3-2set of JFC (Swing) components ii libmysql-java 5.1.10+dfsg-2 Java database (JDBC) driver for My ii libpdfbox-java1:0.7.3+dfsg-2 PDF library for Java ii libspin-java 1.5+dfsg-3 transparent threading solution for ii sun-java6-jre 6.20-dlj-1 Sun Java(TM) Runtime Environment ( ii velocity 1.6.2-4Java-based template engine for web Versions of packages jabref recommends: ii xdg-utils1.0.2+cvs20100307-1 desktop integration utilities from Versions of packages jabref suggests: ii acroread [pdf-viewer] 9.3.2-0.0Adobe Acrobat Reader: Portable Doc ii ghostscript [postscript-vie 8.71~dfsg2-3 The GPL Ghostscript PostScript/PDF ii gv [postscript-viewer] 1:3.7.1-1PostScript and PDF viewer for X ii jabref-plugin-oo0.7.4+ds-2 OpenOffice plugin for JabRef -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#559897: drawxtl: error from dhelp
Package: drawxtl Version: 5.4+dfsg-3 Severity: minor Installation of drawxtl gives an error during registering with dhelp: Unpacking drawxtl (from .../drawxtl_5.4+dfsg-3_i386.deb) ... Processing triggers for man-db ... Processing triggers for menu ... Processing triggers for desktop-file-utils ... Processing triggers for doc-base ... Processing 1 added doc-base file(s)... Registering documents with dhelp... Error (383685): Illegal character ')' Error (383687): Dictionary key must be a name object Registering documents with scrollkeeper... Setting up drawxtl (5.4+dfsg-3) ... Processing triggers for menu ... -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages drawxtl depends on: ii freeglut3 2.4.0-8 OpenGL Utility Toolkit ii libc6 2.10.2-2 GNU C Library: Shared libraries ii libfltk1.1 1.1.10~rc3-1 Fast Light Toolkit - shared librar ii libgcc1 1:4.4.2-3GCC support library ii libgl1-mesa-glx [libgl1]7.6-1A free implementation of the OpenG ii libglu1-mesa [libglu1] 7.6-1The OpenGL utility library (GLU) ii libstdc++6 4.4.2-3 The GNU Standard C++ Library v3 ii libx11-62:1.2.2-1X11 client-side library ii libxext62:1.0.4-1X11 miscellaneous extension librar ii libxft2 2.1.13-3 FreeType-based font drawing librar ii libxinerama12:1.0.3-2X11 Xinerama extension library ii libxpm4 1:3.5.7-2X11 pixmap library drawxtl recommends no packages. Versions of packages drawxtl suggests: pn openvrml-lookat | vrml-browse none (no description available) ii povray1:3.6.1-12 Persistence of vision raytracer (3 ii povray-includes 1:3.6.1-12 Persistance of vision raytracer (3 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#531319: splix: printing from acroread fails
Package: splix Version: 2.0.0-1 Severity: normal I cannot print pdf-files from acroread. Here are the corresponding lines from /var/log/cups/error_log : D [31/May/2009:16:42:06 +0200] [Job 94] SpliX SpliX filter V. 2.0.0 by Aurélien Croc (AP²C) D [31/May/2009:16:42:06 +0200] [Job 94] SpliX More information at: http://splix.ap2c.org D [31/May/2009:16:42:06 +0200] [Job 94] SpliX Compiled with: Threads=enabled (#=2, Cache=30), JBIG=disabled, BlackOptim=enabled E [31/May/2009:16:42:06 +0200] PID 4230 (/usr/lib/cups/filter/rastertoqpdl) stopped with status 2! D [31/May/2009:16:42:06 +0200] PID 4231 (/usr/lib/cups/backend/usb) exited with no errors. D [31/May/2009:16:42:06 +0200] cupsdCloseClient: 13 D [31/May/2009:16:42:06 +0200] [Job 94] Printer using device file /dev/usb/lp0... D [31/May/2009:16:42:06 +0200] [Job 94] backendRunLoop(print_fd=0, device_fd=5, use_bc=1, side_cb=0xb7ff2a80) E [31/May/2009:16:42:06 +0200] [Job 94] SpliX Cannot get paper size information. Operation aborted. E [31/May/2009:16:42:06 +0200] [Job 94] SpliX Request: cannot load printer information -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages splix depends on: ii libc6 2.9-12 GNU C Library: Shared libraries ii libcups2 1.3.10-1 Common UNIX Printing System(tm) - ii libcupsimage2 1.3.10-1 Common UNIX Printing System(tm) - ii libgcc1 1:4.4.0-5 GCC support library ii libstdc++64.4.0-5The GNU Standard C++ Library v3 splix recommends no packages. splix suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#524149: blt: zooming in a graph produces seqmentation fault
I guess, that you mean downgrading to 2.4z-4. Best regards, Martin Lutz -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525860: python-pmw triggers segmentation fault in blt
I guess that this bug report corresponds to bugs 524149. Best regards, Martin Lutz -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#500059: gfortran-4.3-doc: difference between +0.0 and -0.0 in function SIGN
Package: gfortran-4.3-doc Version: 4.3.0.nf1-1 Severity: normal According to the html manual, the intrinsic function SIGN(A,B) gives ABS(A) if B\ge 0. In gfortran-4.3 there is a difference between +0.0 and -0.0. This should be mentioned in the documentation. program t a=0.0 print *, sign(1.0,a) print *, sign(1.0,-a) end -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages gfortran-4.3-doc depends on: ii gcc-doc-base 4.3.0.nf1-1 several GNU manual pages gfortran-4.3-doc recommends no packages. Versions of packages gfortran-4.3-doc suggests: ii doc-base 0.8.16 utilities to manage online documen -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#497354: ALSA: snd_intel8x0 broken on some boots
I can confirm the original bug report: On most boots with kernel 2.6.26-1-686 sound does not work (There is no problem with kernel 2.6.25-2-686). The update to the latest alsa-base and alsa-utils does not help. cat /proc/asound/modules 0 snd_pcsp 1 snd_intel8x0 dmesg | grep pcsp [ 11.486427] Error: Driver 'pcspkr' is already registered, aborting... installed packages: alsa-base 1.0.17.dfsg-2 alsa-uitls 1.0.16-2 linux-sound-base1.0.17.dfsg-2 udev0.125-7 linux-image-2.6.26-1-6862.6.26-5 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#475671: kexi: csv import fails with type date
Package: kexi Version: 1:1.6.3-5+b1 Severity: normal If a comma-separated-value file, which contains a column of type date, is imported into kexi, the column will be changed into type text. It does not matter, whether type date is automatically recognized by the import routine or manually selected by the user, the result will always be of type text. It is not possible to change the type later into date, because then kexi will loose all data. Example: id, familyname, firstname, birthday 1, Simpson, Homer, 1970-11-11 2, Simpson, Marge, 1974-01-01 3, Simpson, Bart, 1998-04-01 4, Simpson, Lisa, 2000-05-08 5, Simpson, Maggie, 2007-05-06 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages kexi depends on: ii kdelibs4c2a 4:3.5.9.dfsg.1-2+b1 core libraries and binaries for al ii koffice-libs 1:1.6.3-5+b1common libraries and binaries for ii libacl1 2.2.45-1Access control list shared library ii libart-2.0-2 2.3.20-1Library of functions for 2D graphi ii libattr1 1:2.4.41-1 Extended attribute shared library ii libaudio21.9.1-2 Network Audio System - shared libr ii libc62.7-10 GNU C Library: Shared libraries ii libfam0 2.7.0-13.2 Client library to control the FAM ii libfontconfig1 2.5.0-2 generic font configuration library ii libfreetype6 2.3.5-1+b1 FreeType 2 font engine, shared lib ii libgcc1 1:4.3.0-1 GCC support library ii libice6 2:1.0.4-1 X11 Inter-Client Exchange library ii libidn11 1.4-1 GNU libidn library, implementation ii libjpeg626b-14 The Independent JPEG Group's JPEG ii libmysqlclient15off 5.0.51a-3 MySQL database client library ii libpng12-0 1.2.15~beta5-3 PNG library - runtime ii libpqxx-2.6.9ldbl2.6.9-5 C++ library to connect to PostgreS ii libqt3-mt3:3.3.8b-5 Qt GUI Library (Threaded runtime v ii libreadline5 5.2-3 GNU readline and history libraries ii libsm6 2:1.0.3-1+b1X11 Session Management library ii libstdc++6 4.3.0-1 The GNU Standard C++ Library v3 ii libx11-6 2:1.0.3-7 X11 client-side library ii libxcursor1 1:1.1.9-1 X cursor management library ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxft2 2.1.12-2FreeType-based font drawing librar ii libxi6 2:1.1.3-1 X11 Input extension library ii libxinerama1 2:1.0.3-1 X11 Xinerama extension library ii libxrandr2 2:1.2.2-1 X11 RandR extension library ii libxrender1 1:0.9.4-1 X Rendering Extension client libra ii libxt6 1:1.0.5-3 X11 toolkit intrinsics library ii zlib1g 1:1.2.3.3.dfsg-11 compression library - runtime kexi recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#439817: solved for me
In my case the new version splix_1.1.1-1_i386.deb solved the problem. Best wishes, Martin Lutz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#447628: ghemical: Spin Multiplicity unknown
Package: ghemical Version: 2.10-1 Severity: minor If the quantum chemical setup is called the first time (Compute -- Setup -- all QM), the Spin Multiplicity is set to 1, which is correct. If the setup is called a second time, e.g. after geometry optimization, the Spin Multiplicity has changed to three question marks. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-686 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages ghemical depends on: ii atlas3-base [liblapack 3.6.0-20.6Automatically Tuned Linear Algebra ii freeglut3 2.4.0-5.2 OpenGL Utility Toolkit ii lapack3 [liblapack.so. 3.0.2531a-6.1 library of linear algebra routines ii libatk1.0-01.20.0-1 The ATK accessibility toolkit ii libc6 2.6.1-1+b1GNU C Library: Shared libraries ii libcairo2 1.4.10-1 The Cairo 2D vector graphics libra ii libfontconfig1 2.4.2-1.2 generic font configuration library ii libfreetype6 2.3.5-1+b1FreeType 2 font engine, shared lib ii libg2c01:3.4.6-6 Runtime library for GNU Fortran 77 ii libgcc11:4.2.1-4 GCC support library ii libghemical0c2a2.10-1Molecular Modelling Library ii libgl1-mesa-glx [libgl 7.0.1-2 A free implementation of the OpenG ii libglade2-01:2.6.2-1 library to load .glade files at ru ii libglib2.0-0 2.14.1-5 The GLib library of C routines ii libglu1-mesa [libglu1] 7.0.1-2 The OpenGL utility library (GLU) ii libgtk2.0-02.10.13-1 The GTK+ graphical user interface ii libgtkglext1 1.0.6-2.1+b1 OpenGL Extension to GTK (shared li ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libmopac7-01.11-5Semi-empirical Quantum Chemistry L ii libopenbabel1 2.0.2-1 Convert and manipulate chemical da ii libpango1.0-0 1.18.2-1 Layout and rendering of internatio ii libpng12-0 1.2.15~beta5-3PNG library - runtime ii libsc7 2.3.1-1 The Scientific Computing Toolkit ii libsm6 2:1.0.3-1+b1 X11 Session Management library ii libstdc++6 4.2.1-4 The GNU Standard C++ Library v3 ii libx11-6 2:1.0.3-7 X11 client-side library ii libxcursor11:1.1.9-1 X cursor management library ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio ii libxi6 2:1.1.3-1 X11 Input extension library ii libxinerama1 1:1.0.2-1 X11 Xinerama extension library ii libxml22.6.30.dfsg-2 GNOME XML library ii libxmu61:1.0.3-1 X11 miscellaneous utility library ii libxrandr2 2:1.2.2-1 X11 RandR extension library ii libxrender11:0.9.4-1 X Rendering Extension client libra ii libxt6 1:1.0.5-3 X11 toolkit intrinsics library ii mpqc 2.3.1-1 The Massively Parallel Quantum Che ii refblas3 [libblas.so.3 1.2-8 Basic Linear Algebra Subroutines 3 ii zlib1g 1:1.2.3.3.dfsg-6 compression library - runtime ghemical recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#393654: nedit: Search/Replace does not work
Yes, that is the problem: the dialog pops up, but I cannot type anything because the dialog is not focused. Clicking on the text field(s) of the dialog does not help because it also does not focus and I still cannot type anything. I noticed now that I can click on the title bar of the dialog. Then it is focused and can be used. After I submitted the bug report I noticed that this behavior is also in other debian packages based on the lesstif library, e.g. the program xmgrace. Martin Thorsten Haude wrote: Hi, * Martin Lutz wrote (2006-10-17 12:24): The function Search/Replace does not work, if it is started with the mouse via the menu. Does this mean the dialog won't pop up or that it is unusable? If it pops up, is it focused? Do keys work on the dialog? Thorsten -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400444: xserver-xorg-video-nv: update removes package nvidia-glx
Package: xserver-xorg-video-nv Version: 1:1.0.1.5-2 Severity: normal The update of xserver-xorg-video-nv removes the package nvidia-glx, which I need if I want to change to the commercial driver. apt-get install xserver-xorg-video-nv xserver-xorg-core The following packages will be REMOVED: freeglut3-dev libglu1-mesa-dev libglu1-xorg-dev nvidia-glx nvidia-glx-dev -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages xserver-xorg-video-nv depends on: ii libc62.3.6.ds1-8 GNU C Library: Shared libraries ii xserver-xorg-core1:1.0.2-9 X.Org X server -- core server xserver-xorg-video-nv recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#396735: bluefish: Crash trying to save a document
Package: bluefish Version: 1.0.6-1 Severity: grave Justification: renders package unusable The program bluefish crashes, if you press the button save as. The problem occurs, if the file .bluefish/session is missing in the home directory. This is the case on all new installations, because there the whole directory .bluefish is missing. See also: http://bugzilla.gnome.org/show_bug.cgi?id=360401 -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages bluefish depends on: ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libaspell150.60.4-4 GNU Aspell spell-checker runtime l ii libatk1.0-01.12.3-1 The ATK accessibility toolkit ii libbonobo2-0 2.14.0-2 Bonobo CORBA interfaces library ii libbonoboui2-0 2.14.0-5 The Bonobo UI library ii libc6 2.3.6.ds1-4 GNU C Library: Shared libraries ii libcairo2 1.2.4-4 The Cairo 2D vector graphics libra ii libfontconfig1 2.4.1-2 generic font configuration library ii libgconf2-42.16.0-2 GNOME configuration database syste ii libglib2.0-0 2.12.4-1 The GLib library of C routines ii libgnome-keyring0 0.4.9-1 GNOME keyring services library ii libgnome2-02.16.0-2 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.14.0-2 A powerful object-oriented display ii libgnomeui-0 2.14.1-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.14.2-2+b1 GNOME virtual file-system (runtime ii libgtk2.0-02.8.20-3 The GTK+ graphical user interface ii libice61:1.0.1-2 X11 Inter-Client Exchange library ii liborbit2 1:2.14.0-2libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.14.7-1 Layout and rendering of internatio ii libpcre3 6.7-1 Perl 5 Compatible Regular Expressi ii libpopt0 1.10-3lib for parsing cmdline parameters ii libsm6 1:1.0.1-3 X11 Session Management library ii libx11-6 2:1.0.3-2 X11 client-side library ii libxcursor11.1.7-4 X cursor management library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.1-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-3 X11 Input extension library ii libxinerama1 1:1.0.1-4.1 X11 Xinerama extension library ii libxml22.6.26.dfsg-4 GNOME XML library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender11:0.9.1-3 X Rendering Extension client libra bluefish recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#393654: Search/Replace does not work
The problem is not only with Search/Replace. Other features like Mark, Find, Goto Line and Save as can also not be used with the mouse and the menu. I use the window manager icewm (version 1.2.28-1 from Debian-testing). Today I tried to use nedit with kde or wmaker and there I cannot reproduce the bug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#393654: nedit: Search/Replace does not work
Package: nedit Version: 1:5.5-2 Severity: normal The function Search/Replace does not work, if it is started with the mouse via the menu. There is no problem, when the function is started via the keyboard shortcut [Shift]Ctrl+R. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages nedit depends on: ii lesstif2 1:0.94.4-2 OSF/Motif 2.1 implementation relea ii libc6 2.3.6.ds1-4GNU C Library: Shared libraries ii libice6 1:1.0.1-2 X11 Inter-Client Exchange library ii libsm61:1.0.1-3 X11 Session Management library ii libx11-6 2:1.0.0-9 X11 client-side library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxp61:1.0.0.xsf1-1 X Printing Extension (Xprint) clie ii libxt61:1.0.2-2 X11 toolkit intrinsics library nedit recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#387222: gfortran-4.1: internal compiler error: gfc_trans_deferred_array
Matthias Klose wrote: this patch is applied in the package. mhh, I obtain this error with gfortran-4.1 (version 4.1.1-13) from debian testing. Indeed the line number in the gfortran source code is different from the patch I found on the web. So, if I understand you correctly, it is just a coincidence that this error occurs during the compilation of the same package (tonto) and the internal compiler error is in the same file of the gfortran source code (trans-array.c). With the latest gcc-snapshot (version 20060912-1) from debian unstable, the compilation of tonto was successful. This version appeared after the submission of my bug report. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#387222: gfortran-4.1: internal compiler error: gfc_trans_deferred_array
Package: gfortran-4.1 Version: 4.1.1-13 Severity: normal With the Debian version of gfortran-4.1 I cannot compile the tonto package (quantum chemistry). Compilation stops with an internal compiler error: internal compiler error: in gfc_trans_deferred_array, at fortran/trans-array.c:4514 A websearch indicates that there is already a patch available for this problem: http://gcc.gnu.org/ml/fortran/2006-04/msg00121.html -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages gfortran-4.1 depends on: ii gcc-4.1 4.1.1-13 The GNU C compiler ii gcc-4.1-base 4.1.1-13 The GNU Compiler Collection (base ii libc6 2.3.6.ds1-4GNU C Library: Shared libraries ii libc6-dev 2.3.6.ds1-4GNU C Library: Development Librari ii libgfortran1-dev 4.1.1-13 GNU Fortran library development ii libgmp3c2 2:4.2.1+dfsg-4 Multiprecision arithmetic library ii libmpfr1 2.2.0.dfsg.1-8 multiple precision floating-point gfortran-4.1 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#370139: thunderbird: wrong package suggestion
Package: thunderbird Version: 1.5.0.2-3 Severity: minor Thunderbird (Debian testing) suggests the package thunderbird-enigmail, which does not exist in Debian testing. The correct package name would be enigmail. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-1-686 Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages thunderbird depends on: ii debconf [debconf-2.0] 1.5.1Debian configuration management sy ii libatk1.0-0 1.11.4-2 The ATK accessibility toolkit ii libc6 2.3.6-7 GNU C Library: Shared libraries ii libcairo2 1.0.4-2 The Cairo 2D vector graphics libra ii libfontconfig1 2.3.2-5.1generic font configuration library ii libgcc1 1:4.1.0-4GCC support library ii libglib2.0-02.10.2-1 The GLib library of C routines ii libgtk2.0-0 2.8.17-2 The GTK+ graphical user interface ii libjpeg62 6b-13The Independent JPEG Group's JPEG ii libpango1.0-0 1.12.1-2 Layout and rendering of internatio ii libpng12-0 1.2.8rel-5.1 PNG library - runtime ii libstdc++6 4.1.0-4 The GNU Standard C++ Library v3 ii libx11-62:1.0.0-6X11 client-side library ii libxcursor1 1.1.5.2-5X cursor management library ii libxext61:1.0.0-4X11 miscellaneous extension librar ii libxfixes3 1:3.0.1.2-4 X11 miscellaneous 'fixes' extensio ii libxft2 2.1.8.2-5.1 FreeType-based font drawing librar ii libxi6 1:1.0.0-5X11 Input extension library ii libxinerama11:1.0.1-4X11 Xinerama extension library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender1 1:0.9.0.2-4 X Rendering Extension client libra ii libxt6 1:1.0.0-5X11 toolkit intrinsics library ii myspell-de-de [myspell-dict 20051113-1 German dictionary for myspell ii myspell-en-gb [myspell-dict 1:2.0.2-3English_british dictionary for mys ii myspell-en-us [myspell-dict 1:2.0.2-3English_american dictionary for my ii zlib1g 1:1.2.3-11 compression library - runtime thunderbird recommends no packages. -- debconf information: * thunderbird/browser: Debian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365768: firefox: LD_ASSUME_KERNEL broken
Package: firefox Severity: important In the libc6 update to version 2.3.6-7, LD_ASSUME_KERNEL is broken (see also bug reports #365647, #364338, and #364516). The has also severe consequences for the startup script of firefox, which contains LD_ASSUME_KERNEL=2.2.5. Starting firefox gives the following error messages: grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory cut: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.4.27-2-686 Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#354434: Problem also shows up with nedit and xmcd
I also see this problem with nedit and with xmcd. Icewm version 1.2.25-1 shows this problem (black box instead of icon). In version 1.2.20+21pre1-3 everything is fine (no black box). The problem with nedit and xmcd also exists, when I start these applications remotely via ssh and X11-forwarding. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350211: update of mpqc removes package ghemical
Package: mpqc Version: 2.2.3-2 Severity: important I tried to update mpqc, but this would remove the package ghemical. Ghemical depends on mpqc. apt-get install mpqc Reading package lists... Done Building dependency tree... Done The following extra packages will be installed: libsc7 Suggested packages: mpqc-support The following packages will be REMOVED: ghemical libghemical0 libsc6c2 The following NEW packages will be installed: libsc7 The following packages will be upgraded: mpqc -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-1-686 Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages mpqc depends on: ii atlas3-base [liblapack.so.3] 3.6.0-19 Automatically Tuned Linear Algebra ii libc6 2.3.5-8.1 GNU C Library: Shared libraries an ii libg2c0 1:3.4.5-1 Runtime library for GNU Fortran 77 ii libgcc1 1:4.0.2-5 GCC support library ii libsc6c2 2.2.3-2The Scientific Computing Toolkit ii libstdc++64.0.2-5The GNU Standard C++ Library v3 mpqc recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#339452: readline-common: overwrite problem during install
Package: readline-common Version: 5.0-11 Severity: important The package does not install with apt-get because of an overwrite problem. I had to solve it via dpkg -i --force-overwrite. Unpacking readline-common (from .../readline-common_5.0-11_all.deb) ... dpkg: error processing /var/cache/apt/archives/readline-common_5.0-11_all.deb (--unpack): trying to overwrite `/usr/share/info/rluserman.info.gz', which is also in package libreadline-common dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/readline-common_5.0-11_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.4.27-2-686 Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#339367: quanta: Quick Start produces invalid xhtml/javascript code
Package: quanta Version: 4:3.4.2-1.1 Severity: normal If I generate an XHTML-Strict file with Quick Start of Quanta, and I include a JavaScript area the following code is generated: script language=javascript type=text/javascript /* ![CDATA[ */ /* ]] */ /script A validation of this file with the program validate gives the error message: there is no attribute language -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-1-686 Locale: LANG=C, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages quanta depends on: ii kdelibs4c2 4:3.4.2-4 core libraries for all KDE applica ii kfilereplace 4:3.4.2-1.1 batch search-and-replace component ii klinkstatus4:3.4.2-1.1 web link validity checker for KDE ii kommander 4:3.4.2-1.1 visual dialog builder and executor ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libaudio2 1.7-2 The Network Audio System (NAS). (s ii libc6 2.3.5-8 GNU C Library: Shared libraries an ii libfam0c102 [libfa 2.7.0-6 client library to control the FAM ii libfontconfig1 2.3.1-2 generic font configuration library ii libfreetype6 2.1.7-2.4 FreeType 2 font engine, shared lib ii libgcc11:4.0.2-3 GCC support library ii libice64.3.0.dfsg.1-14sarge1 Inter-Client Exchange library ii libidn11 0.5.18-1 GNU libidn library, implementation ii libjpeg62 6b-10 The Independent JPEG Group's JPEG ii libpcre3 4.5-1.2sarge1 Perl 5 Compatible Regular Expressi ii libpng12-0 1.2.8rel-5PNG library - runtime ii libqt3-mt 3:3.3.5-1 Qt GUI Library (Threaded runtime v ii libsm6 4.3.0.dfsg.1-14sarge1 X Window System Session Management ii libstdc++6 4.0.2-3 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-14sarge1 X Window System protocol client li ii libxcursor11.1.3-1 X cursor management library ii libxext6 4.3.0.dfsg.1-14sarge1 X Window System miscellaneous exte ii libxft22.1.7-1 FreeType-based font drawing librar ii libxi6 4.3.0.dfsg.1-14sarge1 X Window System Input extension li ii libxinerama1 6.8.2.dfsg.1-10 X Window System multi-head display ii libxml22.6.22-2 GNOME XML library ii libxrandr2 4.3.0.dfsg.1-14sarge1 X Window System Resize, Rotate and ii libxrender11:0.9.0-2 X Rendering Extension client libra ii libxslt1.1 1.1.15-1 XSLT processing library - runtime ii libxt6 4.3.0.dfsg.1-14sarge1 X Toolkit Intrinsics ii quanta-data4:3.4.2-1.1 data files for Quanta Plus web dev ii tidy 20050415-1HTML syntax checker and reformatte ii xlibs 4.3.0.dfsg.1-14sarge1 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-4.sarge.2 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#307286: cupsys-driver-gimpprint: apt-get upgrade fails
Package: cupsys-driver-gimpprint Version: 4.2.7-9 Severity: grave Justification: renders package unusable apt-get upgrade fails We get the following error message: Setting up cupsys-driver-gimpprint (4.2.7-9) ... Can't use an undefined value as filehandle reference at /usr/sbin/cups-genppdupdate line 95. dpkg: error processing cupsys-driver-gimpprint (--configure): subprocess post-installation script returned error exit status 255 Errors were encountered while processing: cupsys-driver-gimpprint E: Sub-process /usr/bin/dpkg returned an error code (1) -- System Information: Debian Release: 3.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.4.27-2-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages cupsys-driver-gimpprint depends on: ii cupsys 1.1.23-10Common UNIX Printing System(tm) - pn cupsys-driver-gimpprint-dat Not found. ii libc6 2.3.2.ds1-21 GNU C Library: Shared libraries an ii libcupsimage2 1.1.23-10Common UNIX Printing System(tm) - ii libcupsys2-gnutls10 1.1.23-10Common UNIX Printing System(tm) - ii libgimpprint1 4.2.7-9 The Gimp-Print printer driver libr ii perl5.6.1-8.9Larry Wall's Practical Extraction ii zlib1g 1:1.2.2-4compression library - runtime -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#307286: cupsys-driver-gimpprint: apt-get upgrade fails
Are you updating an existing testing installation, or upgrading from woody, or installing the package for the first time? I am upgrading a mixed installation of woody/testing. On two computers the update went fine, on two other computers the upgrade failed with the mentioned error message. If you are upgrading testing, when did you last do a full upgrade? I do not know for sure. Something like two weeks ago. Is the grep package installed? Yes, the grep package is installed (version 2.4.2-3). If you apt-get install cuspsys-driver-gimpprint, do you get the error again? Yes, the error remains the same. As root, what does ls -l /etc/cups/ppd show? prompt# ls -l /etc/cups/ppd total 288 -rw-r--r-- 1 root root 98459 Mar 7 17:12 duplex.ppd -rw-r--r-- 1 root root 40511 Nov 20 2003 kleurduplex.ppd -rw-r--r-- 1 root root 40481 Nov 20 2003 xraykleur.ppd -rw-r--r-- 1 root root 98451 Nov 20 2003 zeedadel.ppd Best wishes, Martin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#307286: cupsys-driver-gimpprint: apt-get upgrade fails
OK. Please could you check the versions of perl perl-base perl-modules I have $ dpkg -s perl | grep ^Vers Version: 5.8.4-8 $ dpkg -s perl-base | grep ^Vers Version: 5.8.4-8 $ dpkg -s perl-modules | grep ^Vers Version: 5.8.4-8 Right, I had version 5.6.1-8.9 of these perl packages. After upgrading to the versions from debian-testing, everything is ok, and cupsys-driver-gimpprint can be installed with apt-get !!! Thanks a lot. Best wishes, Martin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]