Vitals sekss.
Esmu visseksigaka latviete uz shis planetas. Esmu profesionaala pornozvaigzne. Tagad stradaa pirma man veltita majas lapa latviesu valoda. Esi viesis saitaa un ieveertee 3 labakaas filmas no visas manas porno kolekcijas. Nopietns meistardarbs - seksigi, atklati, erotiski. Tas links aizvedis tevi pie manis: www. latvianpornstar. lv (izmet tuksumus un iekopee) -- To UNSUBSCRIBE, email to debian-user-catalan-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113153007.5393613a4...@liszt.debian.org
Re: SID : Extinction de l'écran du portable dès l'utilisation du second écran avec xrandr
Le 13/01/2011 08:57, Denis Rampnoux a écrit : Bonjour, Bonjour Dans le cadre de mon travail, j'utilise un portable Dell avec un chipset video intel sur lequel est branché un écran. L'écran supplémentaire est utilisé comme écran principal et j'utilise xrandr pour étendre le bureau sur les deux écrans (lors du boot les deux écrans sont un clone l'un de l'autre). J'utilise SID et depuis 2 jours, quelques secondes après le lancement de la commande xrandr, l'écran du portable s'éteint définitivement : pas moyen de le rallumer (même lors d'un passage sur la console). Le problème arrive sous XFCE et Gnome. Est-ce que quelqu'un observe un comportement similaire et/ou aurait une idée de solution pour corriger le problème ? Je ne sais pas quelle version de kernel tu as. Sous SID en 2.6.32 par ex (Dell Latitude chipset Intel) s2disk/s2ram fonctionnent parfaitement. Lorsque je démarre avec le 2.6.37 d'experimental, mon écran reste déséspérément noir au réveil :-( Je n'ai pas d'écran externe branché. -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2eba31.3010...@tootai.net
Re: ? montages samba/NFS
Le Thu, 13 Jan 2011 01:10:01 +0100, miluz a écrit : elle est capable de faire des manips ... Sa copine a même tourné l'image sur l'écran (sous Win$ c'est vrai). Alors je me protège. On ne peut être que saisi par la logique du raisonnement. la bétise est le fruit de la division du travail.. Karl Marx (d'après SCHERER, séminaire Jacques Derrida, 2009) je n'irai pas plus loin dans la discussion : - elle est HS (là n'est pas le sujet) - certaines personnes ne veulent pas apprendre (comprendre) les bases de l'informatique. Il faut faire avec. Si tu veux on peut très bien continuer la discussion en privé C Hiebel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2eb7b7$0$21511$426a7...@news.free.fr
Re: pas troll montages samba/NFS
Le Wed, 12 Jan 2011 22:50:01 +0100, Yves Rutschle a écrit : En distant sur l'Internet, en local sur un réseau potentiellement malicieux à cause d'un wifi non controlé ou d'un virus sur un poste, la différence est souvent moins grande qu'on ne veut bien le croire... Peut-être une limitation pas la MAC adresse à ce moment là si on veut être vraiment pur ? le paquet hostapd le permettrait mais est-ce nécessaire ? Comme pour une assurance non prise : je peux pleurer après :-(( À coté de moi il y a tant de réseaux Wifi mal protégés ... que cela me protège. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2eb95d$0$21511$426a7...@news.free.fr
Re: pas troll montages samba/NFS
Le 13 janvier 2011 09:35, moi-meme chie...@free.fr a écrit : Le Wed, 12 Jan 2011 22:50:01 +0100, Yves Rutschle a écrit : En distant sur l'Internet, en local sur un réseau potentiellement malicieux à cause d'un wifi non controlé ou d'un virus sur un poste, la différence est souvent moins grande qu'on ne veut bien le croire... Peut-être une limitation pas la MAC adresse à ce moment là si on veut être vraiment pur ? oh l'adresse MAC ca se trafique aussi... À coté de moi il y a tant de réseaux Wifi mal protégés ... que cela me protège. Des leurres ou des sacrifices ? Interessante approche En wifi, un truc simple contre l'intrusion par des script-kiddies c'est de se choisir un sous-réseau exotique, couper le DHCP et mettre seulement des adresses fixe. ça en arrête pas mal puisqu'ils ne pensent pas à ça tout simplement. Tu peux aussi te faire un vpn local et un partage NFS accessible seulement dans le vpn avec quelques règles iptables.
Re: SID : Extinction de l'écran du portable dès l'utilisation du second écran avec xrandr
J'utilise le noyau 2.6.32-30 bigmem. Je n'utilise pas l'hibernation ni sur disque, ni en RAM. Denis. 2011/1/13 Daniel Huhardeaux no-s...@tootai.net Le 13/01/2011 08:57, Denis Rampnoux a écrit : Bonjour, Bonjour Dans le cadre de mon travail, j'utilise un portable Dell avec un chipset video intel sur lequel est branché un écran. L'écran supplémentaire est utilisé comme écran principal et j'utilise xrandr pour étendre le bureau sur les deux écrans (lors du boot les deux écrans sont un clone l'un de l'autre). J'utilise SID et depuis 2 jours, quelques secondes après le lancement de la commande xrandr, l'écran du portable s'éteint définitivement : pas moyen de le rallumer (même lors d'un passage sur la console). Le problème arrive sous XFCE et Gnome. Est-ce que quelqu'un observe un comportement similaire et/ou aurait une idée de solution pour corriger le problème ? Je ne sais pas quelle version de kernel tu as. Sous SID en 2.6.32 par ex (Dell Latitude chipset Intel) s2disk/s2ram fonctionnent parfaitement. Lorsque je démarre avec le 2.6.37 d'experimental, mon écran reste déséspérément noir au réveil :-( Je n'ai pas d'écran externe branché. -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2eba31.3010...@tootai.net
at et alias
Bonjour à tous, voilà, j'ai une petite question assez simple : peut-on, en lancer une commande avec 'at -f monfichier.sh now', faire appel à des alias? J'ai un alias nommé 'toto', définit et fonctionnel, dans mon fichier d'alias '~/.monfichiedalias'. Si je mets 'toto' dans le fichier 'monfichier.sh' et que je fais un 'at -f monfichier.sh now', j'ai un message d'erreur de commande 'toto' inconnue. J'ai essayé plusieurs choses, notamment de mettre dans 'monfichier.sh' un 'source ~/.monfichiedalias' mais ça ne donne rien. Des idées là-dessus? Merci d'avance, -- TISSET Mathieu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110113093157.gc7...@serveur.lutix.org
Magic SysRQ + Xen + screen + Putty
Bonjour la liste, J'ai un serveur de test qui me fait un kernel panic régulier au reboot. Rien de bien méchant (c'est une machine de test après tout), mais j'ai un soucis pour envoyer les Magic SysRQ. Ce serveur est contrôlé par port série depuis une machine Debian. Sur cette dernière, je lance screen /dev/ttyUSB2 115200. En local depuis la machine Debian, les Magic SysRQ marchent bien. Lorsque j'accède à cette machine à distance depuis un windows par SSH (Putty), ça ne passe pas. J'ai pensé à un problème de mapping clavier entre Windows et Linux, mais je ne trouve pas d'option particulière dans Putty. Une idée ? Cordialement, JB -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2ec86b.7060...@jbfavre.org
Re: at et alias
On Thursday 13 January 2011 à 10:31:57AM, TISSET Mathieu wrote: Bonjour à tous, voilà, j'ai une petite question assez simple : peut-on, en lancer une commande avec 'at -f monfichier.sh now', faire appel à des alias? J'ai un alias nommé 'toto', définit et fonctionnel, dans mon fichier d'alias '~/.monfichiedalias'. Si je mets 'toto' dans le fichier 'monfichier.sh' et que je fais un 'at -f monfichier.sh now', j'ai un message d'erreur de commande 'toto' inconnue. J'ai essayé plusieurs choses, notamment de mettre dans 'monfichier.sh' un 'source ~/.monfichiedalias' mais ça ne donne rien. Des idées là-dessus? Merci d'avance, Sur le chan irc #bash, y'a un adage à propos des alias : Si tu dois poser la question, utilise plutôt une fonction. $ toto(){ echo Bonjour, $USER; }; $ toto Bonjour, matthieu $ Les alias n'ont pas été imaginés pour être utilisés dans un script, mais interactivement. Si tu y tiens craiment, regarde du côté de la commande builtin '.' pour charger manuellement ce fichier, et du côté de shopt expand_aliases (bash). -- Free software, free society. Jérémie Courrèges-Anglas GPG key : 06A11494 pgplom7gtZZr1.pgp Description: PGP signature
Re: pas troll montages samba/NFS
On Thu, Jan 13, 2011 at 08:35:41AM +, moi-meme wrote: Peut-être une limitation pas la MAC adresse à ce moment là si on veut être vraiment pur ? Changer son adresse MAC est très très simple, je ne pense pas que ça accroisse la sécurité. le paquet hostapd le permettrait mais est-ce nécessaire ? Faut pas s'énerver: les chances qu'on te casse ton WPA2 pour écouter le traffic de ton NFS pour te faire qqch de mal sont très très faibles :-) Y. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110113095510.gg...@naryves.com
Re: at et alias
TISSET Mathieu a écrit : Des idées là-dessus? Bonjour, il faut mettre expand_aliases on avec shopt PS: question HS, il y a une liste pour les scripts. -- Bien cordialement, Stephane Ascoet -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2ec94a.5090...@ac-orleans-tours.fr
Re: ClamaV et les PDFs
Re, On Thu, Jan 13, 2011 at 08:38:23AM +0100, Bernard Schoenacker wrote: serait il possible de réaliser l'essai avec un bout de signature injecté dans une image, malheureusement je doute que clamav arrive à détecter la présence ... Faudrait essayer... Si tu as un bout de code qui fait ça (injecter), j'ai toujours les deux machines de test de ClamAV en place pour leur soumettre le fichier. A+ -- JFS. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110113101726.gb31...@jones.jfs.dt
Des log au kilomètre !
Bonjour, J'ai installé très récemment Debian 5.0.7 puis j'ai fais quelques mises à jour (j'utilise les dépôts testing et backports). Depuis quelques temps, le système remplit des logs au kilomètre dans /var/log/syslog à propos de la gestion USB: Jan 13 11:39:39 euphorie kernel: [92249.792025] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:39 euphorie kernel: [92249.808996] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:39 euphorie kernel: [92249.928921] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:40 euphorie kernel: [92250.031613] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:40 euphorie kernel: [92250.143437] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:40 euphorie kernel: [92250.160539] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:40 euphorie kernel: [92250.280343] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:40 euphorie kernel: [92250.383065] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:40 euphorie kernel: [92250.494895] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:40 euphorie kernel: [92250.511961] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:40 euphorie kernel: [92250.631763] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:40 euphorie kernel: [92250.734527] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:40 euphorie kernel: [92250.846374] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:40 euphorie kernel: [92250.863382] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:40 euphorie kernel: [92250.983185] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:41 euphorie kernel: [92251.085988] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:41 euphorie kernel: [92251.085996] hub 1-0:1.0: unable to enumerate USB device on port 3 Jan 13 11:39:41 euphorie kernel: [92251.086001] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:43 euphorie kernel: [92253.833773] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:43 euphorie kernel: [92253.850836] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:43 euphorie kernel: [92253.970639] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:44 euphorie kernel: [92254.073406] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:44 euphorie kernel: [92254.187101] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:44 euphorie kernel: [92254.206254] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:44 euphorie kernel: [92254.326178] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:44 euphorie kernel: [92254.428863] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:44 euphorie kernel: [92254.540717] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:44 euphorie kernel: [92254.557797] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:44 euphorie kernel: [92254.678597] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:44 euphorie kernel: [92254.780326] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:44 euphorie kernel: [92254.895511] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:44 euphorie kernel: [92254.909466] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:45 euphorie kernel: [92255.029147] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:45 euphorie kernel: [92255.131818] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:45 euphorie kernel: [92255.131825] hub 1-0:1.0: unable to enumerate USB device on port 3 Jan 13 11:39:45 euphorie kernel: [92255.131828] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:47 euphorie kernel: [92257.827646] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:47 euphorie kernel: [92257.844765] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:47 euphorie kernel: [92257.964571] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:48 euphorie kernel: [92258.067278] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:48 euphorie kernel: [92258.179105] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:48 euphorie kernel: [92258.196410] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:48 euphorie kernel: [92258.315981] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:48 euphorie kernel: [92258.418736] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:48 euphorie kernel: [92258.530567] usb 1-3: new high speed USB device using xhci_hcd and address 0 Jan 13 11:39:48 euphorie kernel: [92258.547584] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:48 euphorie kernel: [92258.667536] usb 1-3: device descriptor read/8, error -61 Jan 13 11:39:48 euphorie kernel: [92258.770206] hub 1-0:1.0: cannot disable port 3 (err = -32) Jan 13 11:39:48 euphorie kernel:
[Résolu]Re: at et alias
Merci pour l'aide qui m'a mis sur la bonne piste dont voici les résultats: dans mon fichier appelé par 'at -f', j'ai du ajouter : code bash# ben oui, at appelle ksh dans mon entreprise (quel couillon cet at... ;) ) shopt -s expand_aliases # pour rendre les aliases utilisables hors shell intéractif source ~/.bashrc# pour lire les aliases monalias /code Merci pour l'aide et désolé pour le HS Stéphane (je ne savais pas qu'il y avait une liste spéciale pour les scripts) ++ mat On Thu, Jan 13, 2011 at 11:07:40AM +0100, Jeremie COURREGES-ANGLAS wrote: On Thursday 13 January 2011 à 10:31:57AM, TISSET Mathieu wrote: Bonjour à tous, voilà, j'ai une petite question assez simple : peut-on, en lancer une commande avec 'at -f monfichier.sh now', faire appel à des alias? J'ai un alias nommé 'toto', définit et fonctionnel, dans mon fichier d'alias '~/.monfichiedalias'. Si je mets 'toto' dans le fichier 'monfichier.sh' et que je fais un 'at -f monfichier.sh now', j'ai un message d'erreur de commande 'toto' inconnue. J'ai essayé plusieurs choses, notamment de mettre dans 'monfichier.sh' un 'source ~/.monfichiedalias' mais ça ne donne rien. Des idées là-dessus? Merci d'avance, Sur le chan irc #bash, y'a un adage à propos des alias : Si tu dois poser la question, utilise plutôt une fonction. $ toto(){ echo Bonjour, $USER; }; $ toto Bonjour, matthieu $ Les alias n'ont pas été imaginés pour être utilisés dans un script, mais interactivement. Si tu y tiens craiment, regarde du côté de la commande builtin '.' pour charger manuellement ce fichier, et du côté de shopt expand_aliases (bash). -- Free software, free society. Jérémie Courrèges-Anglas GPG key : 06A11494 -- TISSET Mathieu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110113110026.ga9...@serveur.lutix.org
Re: Des log au kilomètre !
Le jeudi 13 janvier 2011 à 11:59 +0100, Luxpopuli Open source a écrit : Bonjour, Depuis quelques temps, le système remplit des logs au kilomètre dans /var/log/syslog à propos de la gestion USB: Que dois-je faire pour mettre un terme à cette logorrhée informatique ? au hazard ... changer de cable USB ? Julien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/1294916527.3976.1.camel@pc-julien.office
Re: ClamaV et les PDFs
Le Thu, 13 Jan 2011 11:17:26 +0100, JF Straeten jfstrae...@scarlet.be a écrit : Re, On Thu, Jan 13, 2011 at 08:38:23AM +0100, Bernard Schoenacker wrote: serait il possible de réaliser l'essai avec un bout de signature injecté dans une image, malheureusement je doute que clamav arrive à détecter la présence ... Faudrait essayer... Si tu as un bout de code qui fait ça (injecter), j'ai toujours les deux machines de test de ClamAV en place pour leur soumettre le fichier. A+ bonjour, pour info victor stinner a déjà réalisé ce genre d'essai et malheureusument l'équipe en charge de clamAV ne bouge pas ses fesses depuis plusieures années et que à un momment cela devient trop criant lien : http://www.haypocalc.com/wiki/Mes_contributions_aux_logiciels_libres slt bernard -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110113131259.26f4c279.bernard.schoenacker_free.fr@hamtaro
Re: Magic SysRQ + Xen + screen + Putty
Le Thu, 13 Jan 2011 10:39:55 +0100, Jean Baptiste Favre a écrit : Bonjour la liste, J'ai un serveur de test qui me fait un kernel panic régulier au reboot. Rien de bien méchant (c'est une machine de test après tout), mais j'ai un soucis pour envoyer les Magic SysRQ. Ce serveur est contrôlé par port série depuis une machine Debian. Sur cette dernière, je lance screen /dev/ttyUSB2 115200. En local depuis la machine Debian, les Magic SysRQ marchent bien. Lorsque j'accède à cette machine à distance depuis un windows par SSH (Putty), ça ne passe pas. J'ai pensé à un problème de mapping clavier entre Windows et Linux, mais je ne trouve pas d'option particulière dans Putty. Le problème vient plus probablement de screen qui n'envoie pas la bonne séquence d'échappement. Je ne sais pas comment régler le problème avec screen, en revanche j'utilise console-server (et console-client) pour gérer mes serveurs via les ports série, et la séquence CTRLEcl0magic key fonctionne parfaitement via ce biais. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/igmqj5$g85$1...@dough.gmane.org
crash avec virtualisation kvm / lenny
Bonjour, Nous avons quelques machines virtuelles sous lenny qui tournent sur une machine hôte en lenny aussi. La virtualisation est faire à la main avec des commandes kvm de base De temps à autre ( désolé, on a pas encore pu isoler de cause spécifique ), une machine virtuelle plante : - elle devient inaccessible - elle ne répond plus au system_powerdown qu on peut passer via le monitor - elle prend toutes les ressources CPU proposées par l'hôte ( bref, il reste kill -9 pour tuer le process ) Au reboot, nous avons en général constaté dans les logs que les dernières lignes de log écrites ont une date farfelue ( du style 15 jours ds le futur ) puis .. plus rien .. Nos machines virtuelles sont synchronisées côté temps par NTP Avez-vous rencontré ce genre de problème et sauriez-vous le contourner ? Merci, Fred -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/830820.40455...@web29515.mail.ird.yahoo.com
Re: Magic SysRQ + Xen + screen + Putty
Le 13/01/2011 13:18, Eric Belhomme a écrit : Le Thu, 13 Jan 2011 10:39:55 +0100, Jean Baptiste Favre a écrit : Bonjour la liste, J'ai un serveur de test qui me fait un kernel panic régulier au reboot. Rien de bien méchant (c'est une machine de test après tout), mais j'ai un soucis pour envoyer les Magic SysRQ. Ce serveur est contrôlé par port série depuis une machine Debian. Sur cette dernière, je lance screen /dev/ttyUSB2 115200. En local depuis la machine Debian, les Magic SysRQ marchent bien. Lorsque j'accède à cette machine à distance depuis un windows par SSH (Putty), ça ne passe pas. J'ai pensé à un problème de mapping clavier entre Windows et Linux, mais je ne trouve pas d'option particulière dans Putty. Le problème vient plus probablement de screen qui n'envoie pas la bonne séquence d'échappement. Je ne sais pas comment régler le problème avec screen, en revanche j'utilise console-server (et console-client) pour gérer mes serveurs via les ports série, et la séquence CTRLEcl0magic key fonctionne parfaitement via ce biais. Bonjour, Merci pour la réponse. Je ne connaissais pas conserver-server et conserver-client et vais donc les tester. Juste une question à propos de CTRLEcl0. le CRTL, ok je vois. Mais la suite ? Il s'agit de lettre (e majuscule, c minuscule, l minuscule et 0) à taper les unes après les autres, ou d'une séquence simultanée ? ET si j'ai bien suivi, ceci remplace le Alt+Syst des Magic SysRQ classiques ? Néanmoins, dans la mesure où en local sur ma machine les séquences SysRQ fonctionnent correctement, je me dis que screen n'est pas concerné. Cordialement, JB -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2efecc.6090...@jbfavre.org
Re: crash avec virtualisation kvm / lenny
Le 13/01/2011 13:41, gnafou a écrit : Bonjour, Bonjour Nous avons quelques machines virtuelles sous lenny qui tournent sur une machine hôte en lenny aussi. La virtualisation est faire à la main avec des commandes kvm de base De temps à autre ( désolé, on a pas encore pu isoler de cause spécifique ), une machine virtuelle plante : - elle devient inaccessible - elle ne répond plus au system_powerdown qu on peut passer via le monitor - elle prend toutes les ressources CPU proposées par l'hôte Toujours la même? ( bref, il reste kill -9 pour tuer le process ) virsh -c qemu:///system destroy Nom de la VM Au reboot, nous avons en général constaté dans les logs que les dernières lignes de log écrites ont une date farfelue ( du style 15 jours ds le futur ) puis .. plus rien .. Nos machines virtuelles sont synchronisées côté temps par NTP Oui, mais une seule fois par jour je suppose. Avez-vous rencontré ce genre de problème et sauriez-vous le contourner ? Oui, mais uniquement avec des Win XP ou Server 2008, jamais avec une VM Linux. Parcontre, tous nos serveurs hotes Lenny (ceux qui accueillent les VM) sont en 2.6.32 de Backport. -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f0288.1080...@tootai.net
Re: Des log au kilomètre !
Merci Julien, J'ai débranché le disque dur externe en prenant soin de me placer sur le terminal tty1 car l'expérience m'a montré que (dé)brancher ce disque provoque le freeze total de kde (sauf si je (dé)branche juste après m'être logué). Et du coup, effectivement, le système arrête de loguer. Pascal Le 13 janvier 2011 12:02, Julien jul...@nura.eu a écrit : Le jeudi 13 janvier 2011 à 11:59 +0100, Luxpopuli Open source a écrit : Bonjour, Depuis quelques temps, le système remplit des logs au kilomètre dans /var/log/syslog à propos de la gestion USB: Que dois-je faire pour mettre un terme à cette logorrhée informatique ? au hazard ... changer de cable USB ? Julien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/1294916527.3976.1.camel@pc-julien.office
[HS] Load Balancing Disques Durs
Bonjour à tous ! On vient de me faire une demande interessante et assez théorique et j'aimerais vos avis puisqu'on trouve des experts en tout ici. Je dois remettre à zéro une lame de serveur pour y mettre une Debian et plusieurs OS invités avec KVM (Il y aurait dessus 2 à 10 invités). A priori le serveur tiendra la charge pour le processeur et la mémoire mais quelqu'un doute de la performance des disques durs dessus et me demande de chercher une solution de répartition de charge sur les deux disques. Il y a bien l'idée de mettre un LVM avec Stripping sur les deux disques ou un RAID 0 logiciel mais a votre avis sont-ce de bonnes idées question performance ? J'ai l'impression que ça générera de la charge supplémentaire pour le système hote. PS : Les considérations de sauvegardes (redondance, miroir...) n'ont pas d'intérêts dans ce cas ci. Les images seraient là a des fin de tests et seraient injectés au besoin dans la machine. -- Kévin
Re: [HS] Load Balancing Disques Durs
Le 13/01/2011 15:04, Kevin Hinault a écrit : Bonjour à tous ! Bonjour On vient de me faire une demande interessante et assez théorique et j'aimerais vos avis puisqu'on trouve des experts en tout ici. Je dois remettre à zéro une lame de serveur pour y mettre une Debian et plusieurs OS invités avec KVM (Il y aurait dessus 2 à 10 invités). A priori le serveur tiendra la charge pour le processeur et la mémoire mais quelqu'un doute de la performance des disques durs dessus et me demande de chercher une solution de répartition de charge sur les deux disques. Il y a bien l'idée de mettre un LVM avec Stripping sur les deux disques ou un RAID 0 logiciel mais a votre avis sont-ce de bonnes idées question performance ? J'ai l'impression que ça générera de la charge supplémentaire pour le système hote. LVM sur chaque disque, puis créer un LV par VM. A ta charge -ou celle de l'administrateur- de créer les VM en les répartissant sur les VG des deux disques. -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f07af.4010...@tootai.net
Re: pas troll montages samba/NFS
Le 12 Jan 2011 20:05:47 GMT, moi-meme a écrit : Le Wed, 12 Jan 2011 18:40:03 +0100, Papinux a écrit : pour les montages distants (tout serveur avec openssh-server - client Linux), je n'utilise plus que sshfs. je suis en local mais merci pour le tuyau. La réponse est ambiguë: ici nous parlons du montage d'une partition située sur une autre machine, donc il s'agit d'un montage distant (et peu importe si les machines sont sur le réseau *local* ou ailleurs). ssfhs, même sur un réseau de type LAN ou WLAN, est très facile et souple à mettre en œuvre, indépendamment du fait que les données qui circulent sur le réseau sont chiffrées. A+ -- Px -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110113174643.2ec5b78e@lucifer
Re: [HS] Load Balancing Disques Durs
Le 13/01/11 à 15:09, Daniel Huhardeaux no-s...@tootai.net a écrit : DH Il y a bien l'idée de mettre un LVM avec Stripping sur les deux DH disques ou un RAID 0 logiciel mais a votre avis sont-ce de bonnes DH idées question performance ? J'utilise du lvm avec des LV sur deux disques (--stripes 2 à la création du lv) et j'ai pas constaté de charge énorme, mais je sollicite probablement pas assez mes disques pour que ça se voit. J'avais hésité à l'époque en lvm par dessus raid0 ou lvm seul avec du --stripes 2 et demandé ici (y'avait qq mesures de perfs, tu peux rechercher, c'était de mémoire l'été dernier). DH J'ai l'impression que ça générera de la charge supplémentaire pour le DH système hote. AMHA elle sera pas si énorme, à moins d'avoir une machine qui ne fasse que ça (un filer), je pense que la conso CPU liée au stripping lvm sera quasi négligeable devant celles des VM. DH LVM sur chaque disque, puis créer un LV par VM. A ta charge -ou celle de DH l'administrateur- de créer les VM en les répartissant sur les VG des DH deux disques. Ça sécurise un peu mieux (si un disque crash, y'a encore les VM de l'autre) mais ça complique peut-être bcp pour pas tellement d'avantages non ? (par rapport à du lvm global sur les 2 disques). -- Daniel J'aurais voulu être un espion, mais il fallait avaler des microfilms et mon médecin me l'a déconseillé. Woody Allen -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110113190748.0257a...@quad.lairdutemps.org
Re: [HS] Load Balancing Disques Durs
Tu as un problème avec ton mailer: je ne suis pas l'auteur du fil comme le laisse penser ton message! ;-) Le 13/01/2011 19:07, Daniel Caillibaud a écrit : Le 13/01/11 à 15:09, Daniel Huhardeauxno-s...@tootai.net a écrit : DHIl y a bien l'idée de mettre un LVM avec Stripping sur les deux DHdisques ou un RAID 0 logiciel mais a votre avis sont-ce de bonnes DHidées question performance ? J'utilise du lvm avec des LV sur deux disques (--stripes 2 à la création du lv) et j'ai pas constaté de charge énorme, mais je sollicite probablement pas assez mes disques pour que ça se voit. J'avais hésité à l'époque en lvm par dessus raid0 ou lvm seul avec du --stripes 2 et demandé ici (y'avait qq mesures de perfs, tu peux rechercher, c'était de mémoire l'été dernier). DHJ'ai l'impression que ça générera de la charge supplémentaire pour le DHsystème hote. AMHA elle sera pas si énorme, à moins d'avoir une machine qui ne fasse que ça (un filer), je pense que la conso CPU liée au stripping lvm sera quasi négligeable devant celles des VM. DH LVM sur chaque disque, puis créer un LV par VM. A ta charge -ou celle de DH l'administrateur- de créer les VM en les répartissant sur les VG des DH deux disques. Ça sécurise un peu mieux (si un disque crash, y'a encore les VM de l'autre) mais ça complique peut-être bcp pour pas tellement d'avantages non ? (par rapport à du lvm global sur les 2 disques). -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f454f.3060...@tootai.net
Re: rapport rkhunter
Le 5 janvier 2011 20:41, Jean-Yves F. Barbier 12u...@gmail.com a écrit : Deuxièmement ,si non comment supprimer ces alertes du rapport car la commande rkhunter --propupd ni fait rien. laisse tomber cette daube: il ne fait que te renvoyer des faux positifs. une alternative ? Cheers.
Re: rapport rkhunter
Bonsoir, Le Thursday 13 January 2011 23:16:50 Cornichon, vous avez écrit : Le 5 janvier 2011 20:41, Jean-Yves F. Barbier 12u...@gmail.com a écrit : Deuxièmement ,si non comment supprimer ces alertes du rapport car la commande rkhunter --propupd ni fait rien. laisse tomber cette daube: il ne fait que te renvoyer des faux positifs. une alternative ? chkrootkit Cheers. Chüss -- Serge -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201101140001.17158.debse...@free.fr
Re: rapport rkhunter
merci. Le 14 janvier 2011 00:01, Serge Cavailles debse...@free.fr a écrit : Bonsoir, Le Thursday 13 January 2011 23:16:50 Cornichon, vous avez écrit : Le 5 janvier 2011 20:41, Jean-Yves F. Barbier 12u...@gmail.com a écrit : Deuxièmement ,si non comment supprimer ces alertes du rapport car la commande rkhunter --propupd ni fait rien. laisse tomber cette daube: il ne fait que te renvoyer des faux positifs. une alternative ? chkrootkit Cheers. Chüss -- Serge -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201101140001.17158.debse...@free.fr
Re: certaines personnes seraient HS sur debian? montages samba/NFS
- Mail Original - De: moi-meme chie...@free.fr À: debian-user-french@lists.debian.org Envoyé: Jeudi 13 Janvier 2011 09h28:39 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / Vienne Objet: Re: ? montages samba/NFS je n'irai pas plus loin dans la discussion : - elle est HS (là n'est pas le sujet) - certaines personnes ne veulent pas apprendre (comprendre) les bases de l'informatique. Il faut faire avec. Ah? Et depuis quand? certaines personnes...vous vous foutez de qui? Quelqu'un balance sur la liste des propos sexistes et il est HS de réagir? Il est HORS DE QUESTION d'en faire une affaire privée. Si tu veux on peut très bien continuer la discussion en privé C Hiebel Tu peux t'appeller comme tu veux, ce qui est HS c'est de dire pourquoi on demande de l'aide sur la liste si ce n'est pas nécessaire. Encore plus de justifier l'urgence du problème parce qu'une femme risque de bousiller vos précieuses parti-tions. Vous vous croyez entre mecs? Ou vous tenez à le rester avec ce genre de propos? C'est la communauté toute entière qui ne vas pas plus loin à cause de ça. Ce mail explicite n'a besoin d'aucun mépris supplémentaire. M. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/1102904184.4083791294975190983.javamail.r...@zimbra2-e1.priv.proxad.net
Re: crontab -e
El Wed, 12 Jan 2011 18:00:19 -0600, rantis cares escribió: El día 10 de enero de 2011 16:55, Camaleón escribió: #!/bin/bash ALTA=`date +%d%m%Y-%k%M%S` gnokii --getsms IN 1 /home/usuario/mensajes/$ALTA gnokii --deletesms IN Eso es todo lo que hace mi script Hum... ¿y si ejecutas manualmente el comando para que use la salida estándar en lugar de enviarlo a un archivo, tampoco se queja de la codificación? :-? gnokii --getsms IN 1 No me sale ningun error, de hecho antes de comenzar a hacer el script, lo utilizaba asi. Despues use solo el script y lo ejecutaba cuando lo necesitaba. Solo despues hice que cron lo ejecutara y ahi es donde la puerca torcio el rabo. Haz una pruebas más. Ejecuta el script desde la línea de comandos pero forzando un cambio de locale: LANG=POSIX; sh tuscript.sh ¿Te aparece el error? Se trata de reproducir el mismo error que te aparece cuando quien ejecuta el script es cron y lo único que se me ocurre que pueda causar ese mensaje de error es que cron no tome alguna variable de entorno que necesita para el script... Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.01.13.12.24...@gmail.com
Sobre LDAP
Buenas amigos, Bueno he montado un PDC con samba y ldap ya saben lo tipico y todo va bien. La cuestion es la siguiente ya que estamos migrando la red windows a linux, entonces 2 cositas: 1) Conocen alguna pagina de autenticar linux contra ldap porque con windows ya se hacerlo, he buscado en internet y he conseguido y he probado algunas pero no han funcionado algunos saben de alguna que funcione. 2) Comparto carpetas mediante NFS quisiera saber si yo puedo asignarle permisos a esas carpetas a traves de los usuarios que estan en el ldap, por supuesto si conocen alguna pagina diganme, ya que he buscado y no he encontrado ldap con nfs. Gracias de antemano. Nicolás Disquin
Re: Sobre LDAP
El 13/01/11 11:34, Nicolas escribió: Buenas amigos, Bueno he montado un PDC con samba y ldap ya saben lo tipico y todo va bien. La cuestion es la siguiente ya que estamos migrando la red windows a linux, entonces 2 cositas: 1) Conocen alguna pagina de autenticar linux contra ldap porque con windows ya se hacerlo, he buscado en internet y he conseguido y he probado algunas pero no han funcionado algunos saben de alguna que funcione. En linux puedes autenticar perfectamente contra ldap, puedes hacerlo a través de nss y pam que tienen soporte para ldap. Ahora si lo que quieres es utilizar la autenticación de samba puedes utilizar winbind en conjunto con pam. 2) Comparto carpetas mediante NFS quisiera saber si yo puedo asignarle permisos a esas carpetas a traves de los usuarios que estan en el ldap, por supuesto si conocen alguna pagina diganme, ya que he buscado y no he encontrado ldap con nfs. Configura nss para que mapee los usuarios remotos (ldap) a usuarios del sistema, luego es cuestión de utilizar dichos usuarios en la configuración de nfs. Gracias de antemano. Nicolás Disquin Saludos -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f113d.8000...@uncu.edu.ar
Squeeze se acerca...
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hola, Hoy se ha liberado la primera versión candidata del instalador de Squeeze. http://www.debian.org/News/2011/20110113 Un saludo -BEGIN PGP SIGNATURE- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk0vI+wACgkQN4Xu4S1+RIvVkgCfQpRfsPsOGQvyMxblaztK9pKq 6S8AoK883+gQLqYAqs4RCZ4oZb8vm7o7 =Agw1 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f23ec.60...@escomposlinux.org
Re: Squeeze se acerca...
Que bien. hay amigos locos por usarlo. -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hola, Hoy se ha liberado la primera versión candidata del instalador de Squeeze. http://www.debian.org/News/2011/20110113 Un saludo -BEGIN PGP SIGNATURE- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk0vI+wACgkQN4Xu4S1+RIvVkgCfQpRfsPsOGQvyMxblaztK9pKq 6S8AoK883+gQLqYAqs4RCZ4oZb8vm7o7 =Agw1 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f23ec.60...@escomposlinux.org -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/a942b99608dcc07f35ec1f18c9f902d2.squir...@mail.ci.cf.rimed.cu
Re: Squeeze se acerca...
On 01/13/2011 01:10 PM, JulHer wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hola, Hoy se ha liberado la primera versión candidata del instalador de Squeeze. http://www.debian.org/News/2011/20110113 Más indicio es el mensaje de los otros días de mi rkhunter: The O/S name or version has changed since the last run Old O/S value: Debian squeeze/sidNew value: Debian 6.0 Esto pasó al actualizar desktop-base en testing :D Saludos, Toote -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f319c.7080...@gmail.com
Re: Consulta: ¿Que Notebook o Laptop es buena para instalarle Debian Lenny/Squeeze?
El 11/01/11 14:17, Odair Augusto Trujillo Orozco escribió: El día 11 de enero de 2011 11:53, Trujillo Carmona, Antonio antonio.trujillo.s...@juntadeandalucia.es escribió: Mensaje original Asunto: Consulta: ¿Que Notebook o Laptop es buena para instalarle Debian Lenny/Squeeze? Resent-Date: Mon, 10 Jan 2011 12:46:21 + (UTC) Resent-From: debian-user-spanish@lists.debian.org Fecha: Mon, 10 Jan 2011 09:49:02 -0300 De: Sergio Vernissver...@gmail.com Para: Debian User Spanishdebian-user-spanish@lists.debian.org Estimados: Vivo en la ciudad de Buenos Aires, Argentina y estoy pensando en comprarme una Notebook o Laptop y estoy con dudas. Por lo que les pregunto en que computadora portátil han podido instalar Debian Lenny/Squeeze sin problemas para que reconozca el hardware. En muchos lugares veo que recomiendan Lenovo, pero también veo que hay problemas de sonido o touchpad en algunos modelos. Me inclino por una portátil con 2 o más GB de memoria, en lo posible 500GB de disco rígido, pantalla de 15,6 pulgadas, procesador intel, placa gráfica nVidia. Desde ya muchas gracias por sus comentarios. Saludos. Yo he instalado debian en un HP, acer aspire 1, asus (netbook), toshiba (laptop) y no he tenido problemas con ninguno mas alla de los tipicos de configurar los módulos apropiados de las tarjetas gráficas. Creo que en el fondo todo depende de los elementos que tenga instalados, si existen modulos para ellos o no, por lo general los muy nuevos pueden dar problemas, pero si puedes prueba lo con una live, como no tienes ni que registrarte es posible que te dejen en la tienda. Por cierto el HP y el Toshiba los instale en 64 bits. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2c8b22.4060...@juntadeandalucia.es Cualquiera con video intel y red atheros. Buenas tardes Sergio. Yo tambien soy argentino. Me hice traer una Asus G60JX de miami por una amiga. Tengo instalado win7 que vino y squeeze x64. Me reconocio todo. Le instale los drivers propietarios de nvidia sin ningun inconveniente. Uso compiz sin sin problema.
man bija neliela izklaide braucot
Esmu uz seksu pasista latviete. Esmu pieprasita pornozvaigzne. Ja tu veel nezinaaji, tad sodien ir atverta man veltita majas lapa latvju meelee. Nac un noskaties 3 seksigakas filmas no manas kolekcijas. Profu darbs - seksigi, atklati, erotiski. Uzspied te: HTTP://WWW.latvianpornstar.lv -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113180021.155ff13a4...@liszt.debian.org
Re: Consulta: ¿Que Notebook o Laptop es buena para instalarle Debian Lenny/Squeeze?
es as de bueno? yo estoy con ubuntu 10.10 y hasta ahora normal.. eso si sea debian/ubuntu mi XFCE no me lo quita nadie jajajaja Saludos! El 13/01/2011 14:23, Andres Giribaldi escribi: El 11/01/11 14:17, Odair Augusto Trujillo Orozco escribi: El da 11 de enero de 2011 11:53, Trujillo Carmona, Antonio antonio.trujillo.s...@juntadeandalucia.es escribi: Mensaje original Asunto: Consulta: Que Notebook o Laptop es buena para instalarle Debian Lenny/Squeeze? Resent-Date: Mon, 10 Jan 2011 12:46:21 + (UTC) Resent-From: debian-user-spanish@lists.debian.org Fecha: Mon, 10 Jan 2011 09:49:02 -0300 De: Sergio Vernis sver...@gmail.com Para: Debian User Spanish debian-user-spanish@lists.debian.org Estimados: Vivo en la ciudad de Buenos Aires, Argentina y estoy pensando en comprarme una Notebook o Laptop y estoy con dudas. Por lo que les pregunto en que computadora porttil han podido instalar Debian Lenny/Squeeze sin problemas para que reconozca el hardware. En muchos lugares veo que recomiendan Lenovo, pero tambin veo que hay problemas de sonido o touchpad en algunos modelos. Me inclino por una porttil con 2 o ms GB de memoria, en lo posible 500GB de disco rgido, pantalla de 15,6 pulgadas, procesador intel, placa grfica nVidia. Desde ya muchas gracias por sus comentarios. Saludos. Yo he instalado debian en un HP, acer aspire 1, asus (netbook), toshiba (laptop) y no he tenido problemas con ninguno mas alla de los tipicos de configurar los mdulos apropiados de las tarjetas grficas. Creo que en el fondo todo depende de los elementos que tenga instalados, si existen modulos para ellos o no, por lo general los muy nuevos pueden dar problemas, pero si puedes prueba lo con una live, como no tienes ni que registrarte es posible que te dejen en la tienda. Por cierto el HP y el Toshiba los instale en 64 bits. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2c8b22.4060...@juntadeandalucia.es Cualquiera con video intel y red atheros. Buenas tardes Sergio. Yo tambien soy argentino. Me hice traer una Asus G60JX de miami por una amiga. Tengo instalado win7 que vino y squeeze x64. Me reconocio todo. Le instale los drivers propietarios de nvidia sin ningun inconveniente. Uso compiz sin sin problema. -- lvaro Flores Daz. Depto. de Sistemas Golden Line Antonia Lpez de Bello 162, Recoleta Tel Mesa Central : (562) 3275600 Anexo 6001 Directo 3275606 / 3275605 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f43f5.60...@gmail.com
Re: [OT] Lentitud al recibir los correos de la lista
Hola. La lista tiene greylist, has mirado eso? es un retardo de 5-10 minutos. Saludos El lun, 10-01-2011 a las 21:35 +0100, JulHer escribió: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hola, ¿Soy solo yo al que le pasa...? Desde hace unos días noto que yo envío los correos a la lista, salen de mi servidor a toda pastilla y tardan un buen rato en volver... cuando normalmente era bastante rápido. Al principio pensé que podría haber mucho tráfico en otras listas, pero me estoy empezando a mosquear por si es otra cosa... un saludo JulHer -BEGIN PGP SIGNATURE- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk0rbaIACgkQN4Xu4S1+RIvOcQCeL5FQY4jX/6FS2IvEIM/9xUjN /usAniG0VrmR5N5yfD0ZxDyKrTVrJIV4 =seCJ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1294948457.15338.0.ca...@mail.navegants.net
Re: Squeeze se acerca...
Hola a Todos Soy principiante de linux y querria instalar la version Squeeze, he entrado a la pagina de debian y no encuentro una iso para x86 para instalar en el rigido. Alguien me puede mandar el link de la ido booteable ? Gracias de antemano CP -- Forwarded message -- From: Matías A. Bellone matiasbell...@gmail.com Date: 2011/1/13 Subject: Re: Squeeze se acerca... To: debian-user-spanish@lists.debian.org On 01/13/2011 01:10 PM, JulHer wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hola, Hoy se ha liberado la primera versión candidata del instalador de Squeeze. http://www.debian.org/News/2011/20110113 Más indicio es el mensaje de los otros días de mi rkhunter: The O/S name or version has changed since the last run Old O/S value: Debian squeeze/sidNew value: Debian 6.0 Esto pasó al actualizar desktop-base en testing :D Saludos, Toote -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f319c.7080...@gmail.com
Re: Squeeze se acerca...
El 13/01/11 17:13, Cristian Prado escribió: Hola a Todos Soy principiante de linux y querria instalar la version Squeeze, he entrado a la pagina de debian y no encuentro una iso para x86 para instalar en el rigido. Alguien me puede mandar el link de la ido booteable ? Gracias de antemano CP -- Forwarded message -- From: *Matías A. Bellone* matiasbell...@gmail.com mailto:matiasbell...@gmail.com Date: 2011/1/13 Subject: Re: Squeeze se acerca... To: debian-user-spanish@lists.debian.org mailto:debian-user-spanish@lists.debian.org On 01/13/2011 01:10 PM, JulHer wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hola, Hoy se ha liberado la primera versión candidata del instalador de Squeeze. http://www.debian.org/News/2011/20110113 Más indicio es el mensaje de los otros días de mi rkhunter: The O/S name or version has changed since the last run Old O/S value: Debian squeeze/sidNew value: Debian 6.0 Esto pasó al actualizar desktop-base en testing :D Saludos, Toote -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org mailto:debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org mailto:listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f319c.7080...@gmail.com Hola Cristian. Estas buscando una iso para 32bits o 64bits? Te paso los links del cd1 o dvd1 para 32 o 64. Debian Testing amd64 dvd1 http://cdimage.debian.org/cdimage/weekly-builds/amd64/iso-dvd/debian-testing-amd64-DVD-1.iso Debian Testing amd64 cd1 http://cdimage.debian.org/cdimage/weekly-builds/amd64/iso-cd/debian-testing-amd64-CD-1.iso Debian Testing i386 dvd1 http://cdimage.debian.org/cdimage/weekly-builds/i386/iso-dvd/debian-testing-i386-DVD-1.iso Debian Testing i386 cd1 http://cdimage.debian.org/cdimage/weekly-builds/i386/iso-cd/debian-testing-i386-CD-1.iso Saludos
Descarga cerrada
Hola a todos. primeramente agradecerles a todos el apoyo y la contribucion al desarrollo de SL. Les estoy escribiendo poruqe nesecito descargar la ultima version de Ajaxplorer y por vivir en cuba miren lo que me dice el sitio: Report Not Being From a Blocked Country If you are not from one of the countries banned from accessing this site, please submit us a Support Request including your IP address (200.55.156.166) and country of origin. Me pregunto: ¿Porque mesclan un asunto con otro? Encontré otros sitios donde aparece pero son versiones mas antigua. Si algunos de ustedes pudieran ponerla en elgun lugar??? o si se saben algun otro enlace que no sea bloqueado Se los agradeceria bastante. Quiero usar esta aplicacion porque ciertos usuarios tienen que subir sus sitios web hacia determinado servidor y con esta via es mas facil el proceso. Sé que puedo usar protocolo ftp pero esto es una alternativa más de las tanta que nos brinda el Soft Libre. Un agradecimiento y un saludo para todos Yoandy Melero. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/d838a82dfeedcdf2886e461a2ed17bcb.squir...@mail.ci.cf.rimed.cu
Re: Descarga cerrada
vaya putada... tienes acceso a fileshare o megaupload o ese tipo de servidores?, quizás te podamos ayudar subiendo el fichero para que lo puedas descargar. Una pena estimado, nadie elije donde nacir ni donde vivir. Saludos y mucha suerte. El 13/01/2011 17:33, Yoandy Melero escribió: Hola a todos. primeramente agradecerles a todos el apoyo y la contribucion al desarrollo de SL. Les estoy escribiendo poruqe nesecito descargar la ultima version de Ajaxplorer y por vivir en cuba miren lo que me dice el sitio: Report Not Being From a Blocked Country If you are not from one of the countries banned from accessing this site, please submit us a Support Request including your IP address (200.55.156.166) and country of origin. Me pregunto: ¿Porque mesclan un asunto con otro? Encontré otros sitios donde aparece pero son versiones mas antigua. Si algunos de ustedes pudieran ponerla en elgun lugar??? o si se saben algun otro enlace que no sea "bloqueado" Se los agradeceria bastante. Quiero usar esta aplicacion porque ciertos usuarios tienen que subir sus sitios web hacia determinado servidor y con esta via es mas facil el proceso. Sé que puedo usar protocolo ftp pero esto es una alternativa más de las tanta que nos brinda el Soft Libre. Un agradecimiento y un saludo para todos Yoandy Melero. -- Álvaro Flores Díaz. Depto. de Sistemas Golden Line Antonia López de Bello 162, Recoleta Tel Mesa Central : (562) 3275600 Anexo 6001 Directo 3275606 / 3275605 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f64d6.10...@gmail.com
Re: [OT] Lentitud al recibir los correos de la lista
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 El 13/01/11 20:54, Josep M. Gasso escribió: La lista tiene greylist, has mirado eso? es un retardo de 5-10 minutos. Si, los correos salen de mi servidor inmediatamente. Como comenté en otro correo creo que se basan en algo de las cabeceras para pasar por mas o menos controles de spam, virus, etc. Un saludo JulHer -BEGIN PGP SIGNATURE- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk0vYb8ACgkQN4Xu4S1+RIuPLwCgn6cdijcDZGX3Z0Tz0twmYbBw XEEAn2CX5afYgDnyGrddMaCn4PunZJSV =eng+ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f61bf.5090...@escomposlinux.org
Re: Descarga cerrada
Aqui tienes la ultima versiona que aparece en la pagina para que la descargues esto es un servidor mio en venezuela http://200.90.24.219/ajaxplorer-core-3.2.zip espero te sirva El día 13 de enero de 2011 16:03, Yoandy Melero yoa...@ci.cf.rimed.cu escribió: Hola a todos. primeramente agradecerles a todos el apoyo y la contribucion al desarrollo de SL. Les estoy escribiendo poruqe nesecito descargar la ultima version de Ajaxplorer y por vivir en cuba miren lo que me dice el sitio: Report Not Being From a Blocked Country If you are not from one of the countries banned from accessing this site, please submit us a Support Request including your IP address (200.55.156.166) and country of origin. Me pregunto: ¿Porque mesclan un asunto con otro? Encontré otros sitios donde aparece pero son versiones mas antigua. Si algunos de ustedes pudieran ponerla en elgun lugar??? o si se saben algun otro enlace que no sea bloqueado Se los agradeceria bastante. Quiero usar esta aplicacion porque ciertos usuarios tienen que subir sus sitios web hacia determinado servidor y con esta via es mas facil el proceso. Sé que puedo usar protocolo ftp pero esto es una alternativa más de las tanta que nos brinda el Soft Libre. Un agradecimiento y un saludo para todos Yoandy Melero. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/d838a82dfeedcdf2886e461a2ed17bcb.squir...@mail.ci.cf.rimed.cu -- George Hernández Telf 0414.5859332 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikhmanqse+gz0pc6z_qw4zmxuerp7dsa7ux7...@mail.gmail.com
Re: Descarga cerrada
El día 13 de enero de 2011 17:47, Alvaro Flores aflores.goldenl...@gmail.com escribió: Por favor estimado evite el top posting Hola a todos. primeramente agradecerles a todos el apoyo y la contribucion al desarrollo de SL. Les estoy escribiendo poruqe nesecito descargar la ultima version de Ajaxplorer y por vivir en cuba miren lo que me dice el sitio: Report Not Being From a Blocked Country If you are not from one of the countries banned from accessing this site, please submit us a Support Request including your IP address (200.55.156.166) and country of origin. Me pregunto: ¿Porque mesclan un asunto con otro? Eso mismo debes preguntarlo en tu país. Encontré otros sitios donde aparece pero son versiones mas antigua. Si algunos de ustedes pudieran ponerla en elgun lugar??? o si se saben algun otro enlace que no sea bloqueado intenta bajarlo desde aquí: http://k-plaza.no-ip.org/ajaxexplorer/ajaxplorer-core-3.2.zip lo dejaré 24 horas. Se los agradeceria bastante. Quiero usar esta aplicacion porque ciertos usuarios tienen que subir sus sitios web hacia determinado servidor y con esta via es mas facil el proceso. Sé que puedo usar protocolo ftp pero esto es una alternativa más de las tanta que nos brinda el Soft Libre. tu lo has dicho una alternativa más y debes escoger la más fácil y la que te sea posible de obtener, no siempre tenemos todo lo que queremos. En la red esta lleno de scripts en php que hacen lo que dices, solo debes buscar. Saludos y suerte. -- usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTi=4gwg3hzdevgxw+z-bp5xu_ww62ve-dczek...@mail.gmail.com
Re: Descarga cerrada
Hola a todos. primeramente agradecerles a todos el apoyo y la contribucion al desarrollo de SL. Les estoy escribiendo poruqe nesecito descargar la ultima version de Ajaxplorer y por vivir en cuba miren lo que me dice el sitio: Report Not Being From a Blocked Country If you are not from one of the countries banned from accessing this site, please submit us a Support Request including your IP address (200.55.156.166) and country of origin. Me pregunto: ¿Porque mesclan un asunto con otro? Eso mismo debes preguntarlo en tu país. Encontré otros sitios donde aparece pero son versiones mas antigua. Si algunos de ustedes pudieran ponerla en elgun lugar??? o si se saben algun otro enlace que no sea bloqueado ¿Utilizando un proxy no se puede saltar ese bloqueo? Saludos. -- ** Hector Colina. Linux counter id 131637 Debian user, aka e1th0r Mérida-Venezuela http://e1th0r.gulmer.org.ve Key fingerprint = 6FA1 6D2F CF9E 5C86 7DC5 EF2C 881F 07E7 D12F 702D LA REVOLUCIÓN NO SE HACE UNICAMENTE CON LAS ARMAS -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimt8otgkrxqgdwsdfezwa0hgty2atvia6iud...@mail.gmail.com
Re: Plugins de Gstreamer - msg#00456
Saludes segun el mensaje, el problema es que al eliminar el usuario este pierde propiedades en ciertos grupos, por lo tanto solo tienes que agregar tu usuario a dichos grupos y woala, el archivo a editar es /etc/group, si tu usuario es carlos por ejemplo entonces solo debes de agregarlo en los siguientes grupossi existe otro usuario lo agregas separado por comas, los grupos son los siguientes. adm:x:4:carlos voice:x:22:carlos cdrom:x:24:carlos audio:x:29:carlos dip:x:30:carlos video:x:44:carlos plugdev:x:36:carlos netdev:x:110:carlos gdm:x:112:carlos powerdev:x:115:carlos Si queres agregar otro usuario entonces lo agregas con una coma, pedro por ejemplo: adm:x:4:carlos,pedro voice:x:22:carlos,pedro cdrom:x:24:carlos,pedro audio:x:29:carlos,pedro dip:x:30:carlos,pedro video:x:44:carlos,pedro plugdev:x:36:carlos,pedro netdev:x:110:carlos,pedro gdm:x:112:carlos,pedro powerdev:x:115:carlos,pedro Al menos asi lo solucione yo. -- Roberto blandino === Busque y Encuentre http://www.clasificados.com.ni
Re: Plugins de Gstreamer - msg#00456
El día 13 de enero de 2011 20:23, Roberto José Blandino Cisneros rojobland...@gmail.com escribió: Saludes segun el mensaje, el problema es que al eliminar el usuario este pierde propiedades en ciertos grupos, por lo tanto solo tienes que agregar tu usuario a dichos grupos y woala, el archivo a editar es /etc/group, si tu usuario es carlos por ejemplo entonces solo debes de agregarlo en los siguientes grupossi existe otro usuario lo agregas separado por comas, los grupos son los siguientes. adm:x:4:carlos voice:x:22:carlos cdrom:x:24:carlos audio:x:29:carlos dip:x:30:carlos video:x:44:carlos plugdev:x:36:carlos netdev:x:110:carlos gdm:x:112:carlos powerdev:x:115:carlos Si queres agregar otro usuario entonces lo agregas con una coma, pedro por ejemplo: adm:x:4:carlos,pedro voice:x:22:carlos,pedro cdrom:x:24:carlos,pedro audio:x:29:carlos,pedro dip:x:30:carlos,pedro video:x:44:carlos,pedro plugdev:x:36:carlos,pedro netdev:x:110:carlos,pedro gdm:x:112:carlos,pedro powerdev:x:115:carlos,pedro Al menos asi lo solucione yo. -- usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTi=nwS8npsy96H1iTSJ0r-U=njfrtdwgj6gwk...@mail.gmail.com
¿DRM en el modulo AGP de Intel?
Buenas, compilando el nuevo kernel me he tropezado con esto: Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! La ultima linea es la unica visible al arrancar el kernel 2.6.37. El grupo de las tres lineas esta sacado de /var/log/dmesg Segun veo por Google, es algo de la tarjeta de video. Al principio pense que se referia a que uso el driver que trae el propio kernel y que no aprovecha al 100% la tarjeta PERO a ver drm me ha dado mala espina por lo de Digital Rights Management o como se escriba.
Tu esi mans kaiminsh?
Esmu latvieshu nimfomane. Esmu porno-zvaigzne. Priecajos tev pateikt, ka tagad stradaa pirma, man veltita, majas lapa latviesu valoda. Ienaac un paskaties pirmaas 3 filmas no manas kolekcijas. Patiess meistardarbs - seksigi, atklati, erotiski. Tas links aizvedis tevi pie manis: http://www.google.lv/#q=www.latvianpornstar.lvhl=ltbiw=1020bih=592sa=2fp=50e1679c21cab404 (izvelies google pirmo atradumu) -- To UNSUBSCRIBE, email to debian-user-danish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113150347.bf15c13a4...@liszt.debian.org
Re: Computador compartilhado por 2 pessoas?
Olá! Não pode não, os binários de kernel são gerados pelo dkms a partir do fonte e os outros são dependências, precisa de todos esses pacotes para funcionar e configurar o Xorg com nVidia. Experimente excluir um e verá o que vem em cascata. []'s Junior Polegato Marcelo Luiz de Laia marcelol...@gmail.com escreveu: Junior Polegato - Linux linux at juniorpolegato.com.br writes: Uso somente placas da nVidia, (...) Para configurar vários monitores no X, instalo o driver proprietário da nVidia via pacote fonte (...) e instalo o pacote nvidia-settings (...) pacotes dkms e nvidia-kernel-dkms Oi Junior, Tive uma duvida aqui. Minha placa é uma GeForce 8500 GT e os pacotes instalados sao: :~$ dpkg -l \*nvidia\* | awk '{print $2}' libgl1-nvidia-alternatives libgl1-nvidia-glx libglx-nvidia-alternatives nvidia-glx nvidia-kernel-2.6.32-5-686 nvidia-kernel-2.6.32-5-686-bigmem nvidia-kernel-common nvidia-kernel-dkms nvidia-settings nvidia-vdpau-driver nvidia-xconfig Pelo que entendi, voce instala somente os pacotes: nvidia-kernel-source nvidia-settings dkms nvidia-kernel-dkms É isso mesmo? Posso remover todos os outros que tenho instalado e ficar so com esses 4 (es respectivas dependencias)? É melhor usar o source do que os binarios (nvidia-kernel-2.6.32-5-686-bigmem). Meu sistema tem 4 Gb de RAM. Obrigado Marcelo -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/loom.20110113t010447-...@post.gmane.org
Re: Computador compartilhado por 2 pessoas?
Em 12-01-2011 22:27, Marcelo Luiz de Laia escreveu: Junior Polegato - Linux linux at juniorpolegato.com.br writes: Uso somente placas da nVidia, (...) Para configurar vários monitores no X, instalo o driver proprietário da nVidia via pacote fonte (...) e instalo o pacote nvidia-settings (...) pacotes dkms e nvidia-kernel-dkms Oi Junior, Tive uma duvida aqui. Minha placa é uma GeForce 8500 GT e os pacotes instalados sao: Já que é para instalar os drivers proprietários, baixe direto da NVidia: http://www.nvnews.net/vbulletin/showthread.php?t=122606 Att, Renato -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2ecd15.8020...@diamondcut.com.br
Imagem_Inicialização
Bom dia pessoal, Alguém sabe como alterar aquela imagem de inicialização (aquela primeira, na bios) onde geralmente os fabricantes dos computadores colocar seu logo ? Att, -- _Christian Rosa - °v° Porto Alegre - RS - BRAZIL /(_)\ (51) 92670189 ^ ^ MSN - rosa_christ...@hotmail.com Seja Livre, use GNU/LINUX !
Re: Computador compartilhado por 2 pessoas?
Em 13-01-2011 07:59, Renato S. Yamane escreveu: Já que é para instalar os drivers proprietários, baixe direto da NVidia: http://www.nvnews.net/vbulletin/showthread.php?t=122606 Olá, Não aconselho baixar do site da nVidia, compilar e instalar, pois a cada nova atualização de kernel terá que refazer o processo, algo que o dkms já resolve, além de que ele se instala sem controle do gerenciador de pacotes e pode alterar arquivos que não tem mais recuperação ao desinstalar o driver da nVidia ou quando atualizar o pacote com o arquivo alterado este voltará ao seu estado original criando outros problemas. []'s Junior Polegato -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2ee45a.2000...@juniorpolegato.com.br
Re: Computador compartilhado por 2 pessoas?
Em 13-01-2011 09:39, Junior Polegato - Linux escreveu: Em 13-01-2011 07:59, Renato S. Yamane escreveu: Já que é para instalar os drivers proprietários, baixe direto da NVidia: http://www.nvnews.net/vbulletin/showthread.php?t=122606 Não aconselho baixar do site da nVidia, compilar e instalar, pois a cada nova atualização de kernel terá que refazer o processo Para instalar um driver nvidia, basta: # chmod +x NVIDIA-Linux-x86-260.19.29.run ./NVIDIA-Linux-x86-260.19.29.run Ou seja, dar permissão para execução e depois basta executar. Att, Renato -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2ee72f.7040...@diamondcut.com.br
Re: Imagem_Inicialização
2011/1/13 Christian Rosa christiant.i...@gmail.com: Bom dia pessoal, Alguém sabe como alterar aquela imagem de inicialização (aquela primeira, na bios) onde geralmente os fabricantes dos computadores colocar seu logo ? Bom dia Christian, não sei se é igual em todos as marcas de placas, mas nas placas da Asus, existe o Asus MyLogo que realiza essa operação. -- Rafael Teixeira Duarte - www.rafaelduarte.org Grupo de Usuári@s Debian em Goiás - www.debian-go.org Projeto Software Livre - Goiás - wiki.softwarelivre.org/PSLGO Associação Software Livre de Goiás - www.aslgo.org.br -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTi=GfAHAnWN-u4=u4rnamzvdpg-6doeuxcxxf...@mail.gmail.com
Re: Imagem_Inicialização
Pois é pelo pesquisei no google, o que encontrei são que muda a forma de placa para placa. Gostaria de informções tais como, resolução, tamanho e por ai vai Grato Em 13 de janeiro de 2011 09:56, Rafael Teixeira Duarte rafaeltdua...@gmail.com escreveu: 2011/1/13 Christian Rosa christiant.i...@gmail.com: Bom dia pessoal, Alguém sabe como alterar aquela imagem de inicialização (aquela primeira, na bios) onde geralmente os fabricantes dos computadores colocar seu logo ? Bom dia Christian, não sei se é igual em todos as marcas de placas, mas nas placas da Asus, existe o Asus MyLogo que realiza essa operação. -- Rafael Teixeira Duarte - www.rafaelduarte.org Grupo de Usuári@s Debian em Goiás - www.debian-go.org Projeto Software Livre - Goiás - wiki.softwarelivre.org/PSLGO Associação Software Livre de Goiás - www.aslgo.org.br -- _Christian Rosa - °v° Porto Alegre - RS - BRAZIL /(_)\ (51) 92670189 ^ ^ MSN - rosa_christ...@hotmail.com Seja Livre, use GNU/LINUX !
Depurar opção de teclado altwin:meta_win no Squeeze
Boa tarde! Acabo de voltar ao Debian, depois de um longo exílio forçado nas terras sombrias do tio Portões. Uma coisa que sempre usou antes não funcionou numa instalação do Squeeze, anterior ao candidato ao lançamento destes últimos dias. Sempre usei XkbOptions altwin:meta_win, para ter a tecla Logo (Windows) para ser o meta no GNU Emacs e para usar o Sawfish, deixando o Alt para os aplicativos e para atalhos de usuário no GNU Emacs. Desta vez, constatei que um antigo desejo meu foi satisfeito: o console-setup passou a configurar o teclado do console também, assim como o do X11. Maravilha. Só que essa configuração, assim como as outras do XkbOptions (compose:rwin,nbsp:level3n), não funcionam no X, me forçando a voltar ao setxkbmap. O que é ainda pior é que, agora, embora o setxkbmap funcione para as opções compose e nbsp, cria a maior bagunça com a altwin:meta_win. Ela é aplicada, mas cria uma bagunça em que, por exemplo, perco completamente o Alt, que passa a produzir somente Meta. Antes que alguém pergunte, já tentei também sem o compose:rwin, e com altwin:left_meta_win. Mesmo resultado. Como meu conhecimento de Xkb é completamente superficial, e do console-setup nulo, pergunto: Há um bom tutorial ou manual de Xkb e console-setup? De qualquer maneira, como depurar o problema, talvez até para gerar um relato de erro? Obrigado antecipadamente! -- skype:leandro.gfc.dutra?chat Yahoo!: ymsgr:sendIM?lgcdutra +55 (61) 3546 7191 gTalk: xmpp:leand...@jabber.org +55 (11) 9406 7191 ICQ/AIM: aim:GoIM?screenname=61287803 BRAZIL GMT-3 MSN: msnim:chat?contact=lean...@dutra.fastmail.fm -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikarl4x7xhvjvadijsewtwoh7pmtttjjudm-...@mail.gmail.com
usb harici disk takıldığını anlamak
Merhaba, Bir usb storage takıldığını anlayıp bir bash scripti nasıl tetikleyebilirim. Amacım marka ve modeli belli usbstorage takıldığında, sistemde belli bir noktaya bağlayıp çesitli servislerin yedeklerini almak. Teşekkürler -- Ali Deniz EREN ali.deniz.e...@gmail.com -- To UNSUBSCRIBE, email to debian-user-turkish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinnupdg1nwfz9xrsved_oefp97-nv2xatsod...@mail.gmail.com
Re: usb harici disk takıldığını anlamak
2011/1/13 Ali Deniz EREN ali.deniz.e...@gmail.com: Merhaba, Selam Bir usb storage takıldığını anlayıp bir bash scripti nasıl tetikleyebilirim. Amacım marka ve modeli belli usbstorage takıldığında, sistemde belli bir noktaya bağlayıp çesitli servislerin yedeklerini almak. udev ile yapabilirsiniz belki: http://reactivated.net/writing_udev_rules.html#external-run -- Selçuk -- To UNSUBSCRIBE, email to debian-user-turkish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikybqtxebfan2wrdxz44cm8f0scwq2wo4uw3...@mail.gmail.com
Re: linux on windows
On Thu, 13 Jan 2011 08:07:06 +0100 abdelkader belahcene abelahc...@gmail.com dijo: I have installed for a friend of me, ubuntu on windows, (ubuntu has this option). I lost the password, and tried to fix it, so I tried booting from CD, to fix the problem as usual, (I mean mount HD, and chroot ). There is no linux partition visible, just the ntfs partition, ( in fact the linux partition ???!!! if any is in the ntfs partition!!). any idea to fix it. Ubuntu is a debian based distribution of Linux, but they add a lot of their own things. One thing that they add is called Wubi. Wubi was written by the Ubuntu team. Wubi is a Windows program that allows you to install Ubuntu within Windows. When you install Ubuntu with Wubi it does not create a separate partition, that is, it is all inside the Windows NTFS file system. It is very easy to uninstall because all you have to do is uninstall the Wubi program. When you uninstall the Wubi program it also uninstalls Ubuntu. After you uninstall the Wubu program you can just reinstall it the same way you did the first time. But when you reinstall it I suggest you write down the password someplace where you will not lose it. :) On my laptop, running debian (same problem with ubuntu and al) the CAPS key is enabled I can't disable it, to do it , I go to the text screen, (ctrl+alt+F1), to disable it, after that I come back to the graphical interface. What is the problem ?? It sounds like the problem is a BIOS setting. I say that because you said it happens with Ubuntu and Debian, so the problem is not likely to be in the kernel. I would suggest getting some live CDs of other Linux distributions - like Fedora, Knoppix, Mint, among others. Boot to the live CDs and see if you still have the caps lock key problem. If you do, it is surely a BIOS setting. If it does not happen with other live CDs, then come back and maybe someone can give you other suggestions. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113000744.71f8c...@mailhost.pdx.edu
Re: linux on windows
FYI, first link when I Google 'wink reset password' : http://ubuntuforums.org/showthread.php?t=1041232
Re: linux on windows
On 13.1.2011 9:07, abdelkader belahcene wrote: Hi, I have 2 pbs: I have installed for a friend of me, ubuntu on windows, (ubuntu has this option). I lost the password, and tried to fix it, so I tried booting from CD, to fix the problem as usual, (I mean mount HD, and chroot ). There is no linux partition visible, just the ntfs partition, ( in fact the linux partition ???!!! if any is in the ntfs partition!!). any idea to fix it. On my laptop, running debian (same problem with ubuntu and al) the CAPS key is enabled I can't disable it, to do it , I go to the text screen, (ctrl+alt+F1), to disable it, after that I come back to the graphical interface. What is the problem ?? thanks a lot best regards Ubuntu is installed on the windows parition (C:\ubuntu iirc). The linux filesystem is located in a container file that you can mount as loopback. I guess the file command should identify the container file if you can't find it (should be easy, it's the large one...) -- Juha Tuuna -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2eb709.60...@iki.fi
Re: DD To a Smaller Partition
On 10 January 2011 05:21, Hal Vaughan h...@halblog.com wrote: Is there a way to copy an image of just the files from one drive to another? For example, an intelligent DD that won't copy unused sectors, or will create an archive of just the files? Is there a reason why dump and restore won't fill the bill? Adrian -- 24x7x365 != 24x7x52 Stupid or bad maths? erno hm. I've lost a machine.. literally _lost_. it responds to ping, it works completely, I just can't figure out where in my apartment it is. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktin3x_vedfajhea1ct8msfru8jn-3t44sqoqs...@mail.gmail.com
Re: need help making shell script use two CPUs/cores
Bob Proulx put forth on 1/12/2011 2:48 PM: That makes a lot of sense to me. And also when cpu time divides by 1/N where N is the number of processes then if you have more convert processes running then effectively that task will get more total time than will the other tasks. A little bit more here and a little bit less there on the other tasks running. If you had two converts running and one mail task then the mail task would get 1/3rd and the two converts would get 2/3rds. As opposed to one convert and one mail task with 1/2 and 1/2. The math isn't quite that simple as it's a 2-way SMP box, and Linux can't perfectly schedule compute intensive and non compute intensive processes across CPUs. And context switching on a 550 MHz CPU with only 128K L2 cache is going to be expensive when two compute intensive tasks are running. I commend you on keeping that machine running. My main mail and web server was, until the motherboard died very recently, a 400 MHz P2. I was sad to see it go since it had been such a good performer for so many years. I'll be _very_ sad when this one dies. The Abit BP6 is the only dual Celeron motherboard ever made. It is legendary among over clockers due to the SMP nature, the fact that Celerons were 1/3rd the price of PIIs at the time, and that 333s were easily bumped to 500, and 366s easily bumped to 550--a 50% increase in clock speed, usually achievable with stock heat sinks. No modern chip will do that AFAIK. Thus, you got _more_ performance than an equivalent dual PII workstation which topped out at 450 MHz, for less than 1/3rd the price. This single board prompted Intel to disable the SMP circuitry on all future Celerons. They'd left it enabled assuming no one would actually build such a board. Abit did, and using the venerable Intel 440BX northbridge no less. :) The BP6 also has a lot of features most other boards were lacking at that time (1999), including jumperless BIOS configuration of CPU FSB and multiplier, independent CPU voltage adjustment, a Winbond voltage, thermal, and fan speed monitoring chip, a dual channel 4 port HighPoint UDMA/66 chip yielding a board with 8 HDD capability with 4 at UDMA/66 which no other board offered, and an SMBus header, which _NO_ other consumer board had at that time. The BP6 was the most exotic high end board on the market for at least a couple of years. It used a low end chip, but was faster than anything else at the time. Too bad Abit is no more: http://www.theinquirer.net/inquirer/news/1051283/the-abit-obit -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2ec415.9080...@hardwarefreak.com
Kernel bug in Squeeze
I have had 2 freezes recently with a kernel bug reported on the screen. One was at the end of shutdown (on a reboot) and the other just now on bootup (not the same reboot). I had a look in syslog for some info but I suspect that the output wasn't able to be added due to the system halting. I don't know if there's any other place the output could have been saved. Also how/where could I report this bug? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTi=Tz1groX1=x-rx=qw85qytymnqwz_akjrqk...@mail.gmail.com
Re: Re: linux on windows
Thanks to all the question is : is there a possibility to change the password, from windows or via a CD live thanks again
Re: mail to debian-user bounces
El 2011-01-12 a las 16:03 -0500, Steve Kleene escribió: (I am sending this message on behalf of Steve who seems to have some sort of problem for getting his posts reach the list) I am running Lenny, and when I attempt to post a question by e-mailing debian-user@lists.debian.org, the post never shows up. I send mail from an X console with /usr/sbin/sendmail. When I check /var/log/mail.log, I see this: Jan 11 20:33:05 syrano sm-mta[20348]: p0C1X5id020346: \ to=debian-user@lists.debian.org, ctladdr=sk...@syrano.acb.uc.edu \ (1054/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=121020, \ relay=smtp.uc.edu. [10.23.4.95], dsn=2.0.0, stat=Sent (ok: Message \ 78046533 accepted) Jan 11 20:33:10 syrano sm-mta[20351]: p0C1X9CU020351: \ prvs=986f23af3=sk...@syrano.acb.uc.edu... User unknown Jan 11 20:33:10 syrano sm-mta[20351]: p0C1X9CU020351: \ from=double-bou...@liszt.debian.org, size=271, class=0, nrcpts=0, \ proto=ESMTP, daemon=MTA-v4, relay=liszt.debian.org [82.195.75.100] I do not get an e-mail announcing that it was bounced. The problem started last May, which may be when my employer (uc.edu) starting prepending a BATV tag to my e-mail address (prvs=...). I wonder if this tag has something to do with the User unknown complaint. I am not aware that any other recipients are bouncing my e-mails. My wife also works at uc.edu. She uses Windows 7 and Outlook. She succeeded in posting a test mail today: Subject: Please ignore this test. but when she tried to send the real question it also was never posted. Her e-mails to me also show a BATV tag on the From: line of the mail header. I would appreciate any suggestions on how to get my e-mails accepted at this group. Thanks. Steve Kleene (sk...@syrano.acb.uc.edu) Looks like the bounced message gets redirected to prvs=986f23af3=sk...@syrano.acb.uc.edu and such user (or expanded address) does not exist neither as alias nor as normal mailbox and this is something the mail admins of the syrano.acb.uc.edu site should check. OTOH, I would contact the Debian mailing list admin (listmaster[at]lists.debian.org) so he/she can check the internal mailing lit server logs to find out why are your messages bounced. In the meantime, you can try to use another e-mail account (aka: another smtp server) for posting or even use the Gmane web interface: http://news.gmane.org/gmane.linux.debian.user Remember that you are not required to be subscribed to the list for sending e-mails. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113110958.ga5...@stt008.linux.site
Re: linux on windows
On Thu, 13 Jan 2011 11:22:57 +0100, abdelkader belahcene wrote: Thanks to all the question is : is there a possibility to change the password, from windows or via a CD live thanks again Shawn already told you how. The answser is there awaiting for you to read ;-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.01.13.12.35...@gmail.com
hp dj 2050
hi list, a friend of mine with a standard gnome-desktop-lenny-net-installation does not get his hp deskjet 2050 j510 working. lenny tells him: 'no cups printing filter'. allthough tasksel installed the printer software and i (for him) installed at localhost:631 a seemingly appropriate printer driver. what can be wrong??? somebody who can help us out? regards, steef -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2ef36e.6060...@home.nl
Re: Kernel bug in Squeeze
On Thu, 13 Jan 2011 09:35:04 +, Russell Gadd wrote: I have had 2 freezes recently with a kernel bug reported on the screen. One was at the end of shutdown (on a reboot) and the other just now on bootup (not the same reboot). I had a look in syslog for some info but I suspect that the output wasn't able to be added due to the system halting. I don't know if there's any other place the output could have been saved. Also how/where could I report this bug? If you had a kernel panic or oops it should have been logged under /var/ log/syslog. Next time it happens, take a photo, just in case. You can report these errors to Debian BTS against the kernel package (linux-latest-2.6 or linux-2.6, I'd say :-?) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.01.13.12.52...@gmail.com
Re: hp dj 2050
Dne, 13. 01. 2011 13:43:26 je steef napisal(a): hi list, a friend of mine with a standard gnome-desktop-lenny-net-installation does not get his hp deskjet 2050 j510 working. lenny tells him: 'no cups printing filter'. allthough tasksel installed the printer software and i (for him) installed at localhost:631 a seemingly appropriate printer driver. what can be wrong??? somebody who can help us out? regards, steef Check whether hplip is installed; some hp printers need it. -- Cheerio, Klistvud http://bufferoverflow.tiddlyspot.com Certifiable Loonix User #481801 Please reply to the list, not to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1294923369.9919.0@compax
Re: hp dj 2050
Klistvud schreef: Dne, 13. 01. 2011 13:43:26 je steef napisal(a): hi list, a friend of mine with a standard gnome-desktop-lenny-net-installation does not get his hp deskjet 2050 j510 working. lenny tells him: 'no cups printing filter'. allthough tasksel installed the printer software and i (for him) installed at localhost:631 a seemingly appropriate printer driver. what can be wrong??? somebody who can help us out? regards, steef Check whether hplip is installed; some hp printers need it. yes, hplip is installed. reg., steef -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2ef716.3050...@home.nl
Re: mail to debian-user bounces
(I am sending this message on behalf of Steve who seems to have some sort of problem for getting his posts reach the list) Thank you very much, Camaleón. I would contact the Debian mailing list admin I just did that. In the meantime, you can try to use another e-mail account (aka: another smtp server) for posting or even use the Gmane web interface: http://news.gmane.org/gmane.linux.debian.user As you see, the Gmane suggestion worked. Thanks again. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/loom.20110113t140142-...@post.gmane.org
Re: hp dj 2050
Can you provide log output? yes, hplip is installed. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2ef716.3050...@home.nl
Re: hp dj 2050
On Thu, 13 Jan 2011 13:59:02 +0100, steef wrote: Klistvud schreef: a friend of mine with a standard gnome-desktop-lenny-net-installation does not get his hp deskjet 2050 j510 working. lenny tells him: 'no cups printing filter'. allthough tasksel installed the printer software and i (for him) installed at localhost:631 a seemingly appropriate printer driver. what can be wrong??? somebody who can help us out? Check whether hplip is installed; some hp printers need it. yes, hplip is installed. Which version? Your printer seems to need hplip 3.10.6 (excerpt from hplip log¹): *** HPLIP 3.10.6 Release Added Support for the Following New Printers: --- - HP Deskjet 2050 j510 All-in-one Printer *** ¹http://sourceforge.net/news/?group_id=149981 Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.01.13.13.09...@gmail.com
Re: hp dj 2050
On the 13/01/2011 13:43, steef wrote: hi list, a friend of mine with a standard gnome-desktop-lenny-net-installation does not get his hp deskjet 2050 j510 working. lenny tells him: 'no cups printing filter'. allthough tasksel installed the printer software and i (for him) installed at localhost:631 a seemingly appropriate printer driver. what can be wrong??? somebody who can help us out? regards, steef Hi, you could try to run hp-check -r to see if it find any obvious problem (package missing, wrong permissions...). -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2efb6e.9070...@googlemail.com
Re: Please ignore this test.
On 2011-01-12 23:13:13 GMT, Simon Hollenbach ionpowered at googlemail.com wrote: Debian Mailing lists are not there to test if you can post to them, that's highly unwanted, as stated on debian.org . You have my apologies. Posts from my organization are being bounced recently by debian-user. I induced my wife to see if she could succeed with a test post. (See today's thread mail to debian-user bounces.) I wonder if you will ever post again... Please do so, if you've got an issue or even better, a solution ... I certainly will. I've been posting occasionally for three years, mostly with questions but occasionally with solutions. Thanks. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/loom.20110113t141612-...@post.gmane.org
Re: hp dj 2050
Camaleón schreef: On Thu, 13 Jan 2011 13:59:02 +0100, steef wrote: Klistvud schreef: a friend of mine with a standard gnome-desktop-lenny-net-installation does not get his hp deskjet 2050 j510 working. lenny tells him: 'no cups printing filter'. allthough tasksel installed the printer software and i (for him) installed at localhost:631 a seemingly appropriate printer driver. what can be wrong??? somebody who can help us out? Check whether hplip is installed; some hp printers need it. yes, hplip is installed. Which version? Your printer seems to need hplip 3.10.6 (excerpt from hplip log¹): *** HPLIP 3.10.6 Release Added Support for the Following New Printers: --- - HP Deskjet 2050 j510 All-in-one Printer *** ¹http://sourceforge.net/news/?group_id=149981 Greetings, well: here the output of hp-check -r: jaap@debian:~$ hp-check -r HP Linux Imaging and Printing System (ver. 3.10.9) Dependency/Version Check Utility ver. 14.0 Copyright (c) 2001-8 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... warning: Invalid ppd_dir value: None --- | SYSTEM INFO | --- Basic system information: Linux debian 2.6.26-2-amd64 #1 SMP Thu Nov 25 04:30:55 UTC 2010 x86_64 GNU/Linux Distribution: debian 5.0.7 HPOJ running? No, HPOJ is not running (OK). Checking Python version... OK, version 2.5.2 installed Checking PyQt version... error: NOT FOUND OR FAILED TO LOAD! Checking SIP version... error: SIP not installed or version not found. Checking for CUPS... Status: scheduler is running Version: 1.3.8 error_log is set to level: debug Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.82.4 | RUNTIME DEPENDENCIES | Checking for dependency: cups - Common Unix Printing System... OK, found. Checking for dependency: cups-ddk - CUPS driver development kit... OK, found. Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... OK, found. Checking for dependency: ppdev - Parallel port support kernel module OK, found. Checking for dependency: PyQt - Qt interface for Python... error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. Checking for dependency: python-ctypes - A foreign function library for Python... OK, found. Checking for dependency: python-dbus - Python bindings for dbus... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Reportlab - PDF library for Python... OK, found. Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. -- | HPLIP INSTALLATION | -- Currently installed HPLIP version... HPLIP 3.10.9 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.10.9 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hpijs/HP ppdbase=/usr/share/ppd/hpijs doc=/usr/share/doc/hplip-3.10.9 icon=/usr/share/applications cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv/hp # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=no foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=no cups-drv-install=no
Re: hp dj 2050
On Thu, 13 Jan 2011 15:07:47 +0100, steef wrote: Camaleón schreef: yes, hplip is installed. Which version? Your printer seems to need hplip 3.10.6 (excerpt from hplip log¹): (...) well: here the output of hp-check -r: jaap@debian:~$ hp-check -r HP Linux Imaging and Printing System (ver. 3.10.9) The release in use should be fine. (...) -- | DISCOVERED USB DEVICES | -- No devices found. :-? - | INSTALLED CUPS PRINTER QUEUES | - Deskjet-2050-J510-series Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: usb://HP/Deskjet%202050%20J510%20series?serial=CN08227G3H05D1 PPD: /etc/cups/ppd/Deskjet-2050-J510-series.ppd PPD Description: HP Deskjet 2050 j510 Series hpijs, 3.10.9.11 Printer status: printer Deskjet-2050-J510-series disabled since Thu 13 Jan 2011 02:23:57Filter foomatic-rip-hplip for printer Deskjet-2050-J510-series not available: No such file or directory warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. Here is the problem. You have used CUPS to setup the printer instead using the hplip utility. Try to setup the printer using the hplip wizard, if the printer needs to get any additional plugin, firmware or filter they should be automatically fetched when using hplip. Or you can also try with hp-plugin -i command. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.01.13.14.32...@gmail.com
Grub2 reinstall on raid1 system.
I have a raid1 based W/S running Debian Squeeze uptodate. (was until ~7 days ago) There are 4 drives, 2 of which had never been used or formatted. I configured a new array using Disk Utility from a live Ubuntu CD. That's where I screwed up... The end result was the names of the arrays were changed on the working 2 drives. IE: /dev/md0 to /dev/126 and /dev/md1 became md127. Strangely the md2 array which I setup on the added drives remains as /dev/md2. My root partition is/was on /dev/md0. The result is that Grub2 fails to boot the / array. I have tried three REINSTALLING GRUB procedures from Sysresccd online docs and many others GNU.org, Ubuntu etc. The errors occur when I try to mount the partition with the /boot directory. 'Complains about file system type 'linux_raid_member' This machine has worked for 3 years flawlessly.. Can anyone help with this? Or point me to a place or link to get this fixed. Google doesn't help... I can't find a article/posting where it ended successfully. I have considered a full reinstall after Squeeze goes stable, since this O/S is a crufty upgrade from sarge over time. But useless now.. TIA, Jack -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113082311.6ad80...@torrid.volunteerwireless.net
Re: hp dj 2050
On the 13/01/2011 15:07, steef wrote: Answering in-line Camaleón schreef: On Thu, 13 Jan 2011 13:59:02 +0100, steef wrote: Klistvud schreef: a friend of mine with a standard gnome-desktop-lenny-net-installation does not get his hp deskjet 2050 j510 working. lenny tells him: 'no cups printing filter'. allthough tasksel installed the printer software and i (for him) installed at localhost:631 a seemingly appropriate printer driver. what can be wrong??? somebody who can help us out? Check whether hplip is installed; some hp printers need it. yes, hplip is installed. Which version? Your printer seems to need hplip 3.10.6 (excerpt from hplip log¹): *** HPLIP 3.10.6 Release Added Support for the Following New Printers: --- - HP Deskjet 2050 j510 All-in-one Printer *** ¹http://sourceforge.net/news/?group_id=149981 Greetings, well: here the output of hp-check -r: jaap@debian:~$ hp-check -r Checking PyQt version... error: NOT FOUND OR FAILED TO LOAD! This is for the hp toolbox gui, not strictly required for printer setup. -- | HPLIP INSTALLATION | -- Currently installed HPLIP version... HPLIP 3.10.9 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.10.9 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hpijs/HP ppdbase=/usr/share/ppd/hpijs doc=/usr/share/doc/hplip-3.10.9 icon=/usr/share/applications cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv/hp -- | DISCOVERED USB DEVICES | -- No devices found. - | INSTALLED CUPS PRINTER QUEUES | - Deskjet-2050-J510-series Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: usb://HP/Deskjet%202050%20J510%20series?serial=CN08227G3H05D1 ^^^ You need to use the correct hp back-end, which starts with url like : hp:/usb/ PPD: /etc/cups/ppd/Deskjet-2050-J510-series.ppd PPD Description: HP Deskjet 2050 j510 Series hpijs, 3.10.9.11 Printer status: printer Deskjet-2050-J510-series disabled since Thu 13 Jan 2011 02:23:57Filter foomatic-rip-hplip for printer Deskjet-2050-J510-series not available: No such file or directory The printer is configured to use a foomatic filter, look if there's a hplip recommended driver for the printer, together with the hp back-end it should do the trick. warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. -- | SANE CONFIGURATION | -- 'hpaio' in '/etc/sane.d/dll.conf'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). This is another story, the scanner isn't properly set up either, maybe try : sane-find-scanner as root and see what it says. - | USB I/O SETUP | - Checking for permissions of USB attached printers... HP Device 0x8711 at 005:005: warning: Device URI: (Makeuri FAILED) Have no idea what this is, maybe just related to the wrong back-end (device url) being used. Device node: /dev/bus/usb/005/005 Mode: 0664 --- | SUMMARY | --- error: 4 errors and/or warnings. Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f1627.2030...@googlemail.com
Re: convert \u markup codes for xemacs
On Thu, 13 Jan 2011 07:53:53 +, Russell L. Harris wrote: (...) Is there a facility within Emacs to do the conversion? or perhaps a stand-alone utility? Is there a tutorial which explains all this? Maybe this helps: Q1.8.8: Does XEmacs support Unicode? http://www.xemacs.org/Documentation/21.5/html/xemacs-faq_2.html#SEC72 Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.01.13.15.19...@gmail.com
OT: Sort Of Re: USB stick Security
I recently lost a USB stick. It didn't have any thing of a security concern on it but got me to thinking. Does anyone know of an application that will; encrypt the drive completely; start at boot time; ask for a secure log in if after say 2 or 3 tries; with appropriate warnings of impending doom; will not only lock the person out but completely destroy the drive, so it can never be recovered. Oh and of course works on any OS? Yes I know its a lot but just wondering?? John -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1294927864.6319.9.ca...@beast.home
Re: OT: Sort Of Re: USB stick Security
https://www.ironkey.com/ They claim it works on linux as well. Cheers, JW On Thu, Jan 13, 2011 at 09:11, John W Foster jfoster81...@verizon.net wrote: I recently lost a USB stick. It didn't have any thing of a security concern on it but got me to thinking. Does anyone know of an application that will; encrypt the drive completely; start at boot time; ask for a secure log in if after say 2 or 3 tries; with appropriate warnings of impending doom; will not only lock the person out but completely destroy the drive, so it can never be recovered. Oh and of course works on any OS? Yes I know its a lot but just wondering?? John -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1294927864.6319.9.ca...@beast.home -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTikVxSBop3bOdDaGUfJOF-sQb=aDcen0e==_q...@mail.gmail.com
Re: OT: Sort Of Re: USB stick Security
On Thu, 13 Jan 2011 10:43:01 -0500, Jimmy Wu wrote: On Thu, Jan 13, 2011 at 09:11, John W Foster wrote: I recently lost a USB stick. It didn't have any thing of a security concern on it but got me to thinking. Does anyone know of an application that will; encrypt the drive completely; start at boot time; ask for a secure log in if after say 2 or 3 tries; with appropriate warnings of impending doom; will not only lock the person out but completely destroy the drive, so it can never be recovered. Oh and of course works on any OS? Yes I know its a lot but just wondering?? https://www.ironkey.com/ They claim it works on linux as well. Adding Corsair Padlock: http://www.corsair.com/usb-drives/padlock/flash-padlock-2-8gb-usb-flash-drive.html But it should be nice to have such facility on any flash key, regardless of the hardware. I also read some articles¹ on these type of keys that claimed to be unbreakable and miserably failed in its purpose (the password was easily by-passed due a flaw in their software). ¹http://www.h-online.com/security/news/item/NIST-certified-USB-Flash-drives-with-hardware-encryption-cracked-895308.html Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.01.13.15.58...@gmail.com
Re: hp dj 2050
On 01/13/2011 09:32 AM, Camaleón wrote: Here is the problem. You have used CUPS to setup the printer instead using the hplip utility. Try to setup the printer using the hplip wizard, if the printer needs to get any additional plugin, firmware or filter they should be automatically fetched when using hplip. Or you can also try with hp-plugin -i command. Greetings, Yup. My experience with several different multi-function devices from HP in Debian is that it works best to run # hp-setup -i ip address of multi-function device This leads through a rather ugly CLI dialog. You just answer the questions as you go along, and hp-setup configures the printer / fax / scanner. Trying other approaches has sometimes netted me no results at all, and sometimes it has given me the printer functionality, but not the scanner functions. (SANE couldn't find the scanners until hp-setup was run in interactive mode.) Note that it is _important_ to delete any instance of the new printer / fax from the CUPS localhost:631 location before attempting to run hp-setup. After hp-setup has been run you should see both the printer and the fax device (if any) in the CUPS printers page. I hope this is helpful. I won't pretend to be an expert on this at all. I just know that it has worked for me for every support HP MFD I've had to install. Best regards, Gilbert -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f21ab.60...@comcast.net
Re: Kernel bug in Squeeze
On Thursday 13 Jan 2011 09:35:04 Russell Gadd wrote: Also how/where could I report this bug? For the how, I suggest you look at the reportbug man page. Neil Youngman -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201101131605.38782...@youngman.org.uk
Maximum size of temporary files
Hi all. It seems that the maximum size of internet temporary files on my Debian Lenny system is 5.5MB. How can I enlarge it at my pleasure? Thanks for any help Rodolfo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/878vyoepsy@gmail.com
Re: OT: Sort Of Re: USB stick Security
Hi, On Thu, Jan 13, 2011 at 08:11:04AM -0600, John W Foster wrote: I recently lost a USB stick. It didn't have any thing of a security concern on it but got me to thinking. Does anyone know of an application that will; encrypt the drive completely; Linux kernel :-) http://wiki.debian.org/DebianInstaller/PartmanCrypto start at boot time; ask for a secure log in if after say 2 or 3 tries; Are you trying to use USB key as boot device? with appropriate warnings of impending doom; will not only lock the person out but completely destroy the drive, so it can never be recovered. Oh and of course works on any OS? Yes I know its a lot but just wondering?? John Anyway, Debian can be installed root device being encrypted in squeeze d-i. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1294927864.6319.9.ca...@beast.home -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113160941.gc12...@debian.org
Re: hp dj 2050
Gilbert Sullivan schreef: On 01/13/2011 09:32 AM, Camaleón wrote: Here is the problem. You have used CUPS to setup the printer instead using the hplip utility. Try to setup the printer using the hplip wizard, if the printer needs to get any additional plugin, firmware or filter they should be automatically fetched when using hplip. Or you can also try with hp-plugin -i command. Greetings, Yup. My experience with several different multi-function devices from HP in Debian is that it works best to run # hp-setup -i ip address of multi-function device This leads through a rather ugly CLI dialog. You just answer the questions as you go along, and hp-setup configures the printer / fax / scanner. Trying other approaches has sometimes netted me no results at all, and sometimes it has given me the printer functionality, but not the scanner functions. (SANE couldn't find the scanners until hp-setup was run in interactive mode.) Note that it is _important_ to delete any instance of the new printer / fax from the CUPS localhost:631 location before attempting to run hp-setup. After hp-setup has been run you should see both the printer and the fax device (if any) in the CUPS printers page. I hope this is helpful. I won't pretend to be an expert on this at all. I just know that it has worked for me for every support HP MFD I've had to install. Best regards, Gilbert thank you (all) very much. i'll put your messages thru to my friend who lives on his farm 30 miles from here. i think/hope we cam manage now, now we have learned to pass by cups (and localhost:631) and to use the hplip-utility. it still puzzles me why the driver on the cup website is not in working order. so i keep looking further. many regards, steef -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d2f2b1c.3030...@home.nl
Keyboard freezing/repeating endlessly
First post to Debian-Users; I hope this isn't inappropriate. In December I upgraded Ubuntu 9.04 to 10.04. The keyboard and mouse would then freeze after about five minutes of use. At that point I installed Debian 6 (another machine uses Debian, but this computer had come with Ubuntu 9.04 installed, so I used that for a year with no problems). Alas, the same thing happened with Debian 6. I have a PS/2 mouse and keyboard. I noticed that an added USB mouse would continue to operate, so replaced the mouse with that. The keyboard lockup continued, but decreased in frequency to about one a day. That is still unacceptable, but temporarily manageable. There are no indications of anything wrong in any of the logs. The O/S is fully functional; I can log into it from another machine and restart it that way. When the lockup occurs, most of the time the keyboard continually repeats a key, but not always the same key. I've seen the escape key, the l, the k, and others. Pressing the same key (to get the driver to see the release does not stop it). Other times it appears as though no key is repeating (at least nothing happens when the mouse is placed in a client). I've searched google and found quite a few descriptions of what appears similar behavior, with no solutions. Any suggestions on what I can do? Replace the PS/2 keyboard with a USB? Something I recently noticed is that $ setxkbmap -print indicates that X thinks I'm using a pc105 keyboard when in fact I have a pc104. I changed that, from the command line, with $ setxkbmap -model pc104 That didn't improve anything (I still get lockups) nor did it change the keyboard operation, as far as I can tell. However, I'm wondering why X is using the wrong keyboard model. Maybe I entered the wrong model during the installation. What sets the default value (there is no xorg.conf file)? Thanks for any suggestions. -- Joe Riel -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113090116.1f56f8de@gauss
Re: convert \u markup codes for xemacs
* Camaleón noela...@gmail.com [110113 15:21]: On Thu, 13 Jan 2011 07:53:53 +, Russell L. Harris wrote: (...) Is there a facility within Emacs to do the conversion? or perhaps a stand-alone utility? Is there a tutorial which explains all this? Maybe this helps: Q1.8.8: Does XEmacs support Unicode? http://www.xemacs.org/Documentation/21.5/html/xemacs-faq_2.html#SEC72 Yes, that helps; thanks Camaleón. After a little searching, I concluded that the problem was unicode. Then I discovered the Debian package uni2ascii, which helps -- but still leaves me with some coding to convert with search-and-replace. I have been installing the NOMULE version of XEmacs. RLH -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113170834.gb9...@rlharris.org
Re: Keyboard freezing/repeating endlessly
Joe Riel wrote: First post to Debian-Users; I hope this isn't inappropriate. In December I upgraded Ubuntu 9.04 to 10.04. The keyboard and mouse would then freeze after about five minutes of use. At that point I installed Debian 6 (another machine uses Debian, but this computer had come with Ubuntu 9.04 installed, so I used that for a year with no problems). Alas, the same thing happened with Debian 6. I have a PS/2 mouse and keyboard. I noticed that an added USB mouse would continue to operate, so replaced the mouse with that. The keyboard lockup continued, but decreased in frequency to about one a day. That is still unacceptable, but temporarily manageable. There are no indications of anything wrong in any of the logs. The O/S is fully functional; I can log into it from another machine and restart it that way. When the lockup occurs, most of the time the keyboard continually repeats a key, but not always the same key. I've seen the escape key, the l, the k, and others. Pressing the same key (to get the driver to see the release does not stop it). Other times it appears as though no key is repeating (at least nothing happens when the mouse is placed in a client). I've searched google and found quite a few descriptions of what appears similar behavior, with no solutions. Any suggestions on what I can do? Replace the PS/2 keyboard with a USB? Something I recently noticed is that $ setxkbmap -print indicates that X thinks I'm using a pc105 keyboard when in fact I have a pc104. I changed that, from the command line, with $ setxkbmap -model pc104 That didn't improve anything (I still get lockups) nor did it change the keyboard operation, as far as I can tell. However, I'm wondering why X is using the wrong keyboard model. Maybe I entered the wrong model during the installation. What sets the default value (there is no xorg.conf file)? Are you sure the keyboard is good? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ignbp7$hhv$1...@dough.gmane.org
Re: Keyboard freezing/repeating endlessly
A few details I omitted. Once the freeze occurs, the only way I've found to release it is to restart the machine. Restarting gdm3 (via a remote computer) does not help, it brings up the login screen, but the keyboard is not operational. The problem also occurs in a virtual terminal (though I've never been in a virtual terminal when it started). To get to a virtual terminal with the keyboard dead/repeating, I added a menu entry, accessible via the mouse, that calls chvt, and modified the sudoers permission to allow me to run that. In the virtual terminal I don't see the key repeating, but the keyboard does nothing. I normally run fvwm, but the problem also occurs in Gnome. If there isn't a fix, are there any ideas on how to at least clear the fault once it occurs (without restarting the machine)? As mentioned, typing the key that is repeating does not help. On Thu, 13 Jan 2011 09:01:16 -0800 Joe Riel j...@san.rr.com wrote: First post to Debian-Users; I hope this isn't inappropriate. In December I upgraded Ubuntu 9.04 to 10.04. The keyboard and mouse would then freeze after about five minutes of use. At that point I installed Debian 6 (another machine uses Debian, but this computer had come with Ubuntu 9.04 installed, so I used that for a year with no problems). Alas, the same thing happened with Debian 6. I have a PS/2 mouse and keyboard. I noticed that an added USB mouse would continue to operate, so replaced the mouse with that. The keyboard lockup continued, but decreased in frequency to about one a day. That is still unacceptable, but temporarily manageable. There are no indications of anything wrong in any of the logs. The O/S is fully functional; I can log into it from another machine and restart it that way. When the lockup occurs, most of the time the keyboard continually repeats a key, but not always the same key. I've seen the escape key, the l, the k, and others. Pressing the same key (to get the driver to see the release does not stop it). Other times it appears as though no key is repeating (at least nothing happens when the mouse is placed in a client). I've searched google and found quite a few descriptions of what appears similar behavior, with no solutions. Any suggestions on what I can do? Replace the PS/2 keyboard with a USB? Something I recently noticed is that $ setxkbmap -print indicates that X thinks I'm using a pc105 keyboard when in fact I have a pc104. I changed that, from the command line, with $ setxkbmap -model pc104 That didn't improve anything (I still get lockups) nor did it change the keyboard operation, as far as I can tell. However, I'm wondering why X is using the wrong keyboard model. Maybe I entered the wrong model during the installation. What sets the default value (there is no xorg.conf file)? Thanks for any suggestions. -- Joe Riel -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113092102.517a552f@gauss
Re: Finding kernel modication that caused the boot failure using git-bisect?
Never mind. Found it in one of the Linus' post on LKML.
Re: hp dj 2050
On Thu, 13 Jan 2011 17:41:00 +0100, steef wrote: Gilbert Sullivan schreef: (...) Note that it is _important_ to delete any instance of the new printer / fax from the CUPS localhost:631 location before attempting to run hp-setup. After hp-setup has been run you should see both the printer and the fax device (if any) in the CUPS printers page. I hope this is helpful. I won't pretend to be an expert on this at all. I just know that it has worked for me for every support HP MFD I've had to install. thank you (all) very much. i'll put your messages thru to my friend who lives on his farm 30 miles from here. i think/hope we cam manage now, now we have learned to pass by cups (and localhost:631) and to use the hplip-utility. it still puzzles me why the driver on the cup website is not in working order. so i keep looking further. There are some HP printers models out there (mostly multifunction devices) that besides the PPD file require additional blob code (closed firmware or plugins, or whatever HP name it :-P) to properly run and therefore CUPS cannot help here because it cannot download the required code to get the device up and working ;-( Best (and easiest) to setup are PostScript based printers, beyond that the linux support for each printer brand and model varies a lot! Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.01.13.17.26...@gmail.com
Re: Keyboard freezing/repeating endlessly
Are you sure the keyboard is good? No, but it would be quite the coincidence that the keyboard works fine for a year and fails within five minutes of installing a new O/S. However, to remove that possibility, I just now replaced it with another PS/2 keyboard. I'll respond when this locks up (though this old keyboard is a pain to type on). A useful suggestion, thanks. -- Joe Riel -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110113092740.0c8f0698@gauss