iwlwifi instal.lat però la tarja wifi no funciona
Bones, Acabo d'instal.lar un impressionant Wheezy amb Openbox, tot va de maravella excepte la tarja wifi. He instal.lat el paquet firmware-ilwifi 0.34 i m'agradaria utilitzar wicd com a gestor de xarxes. Us adjunto les sortides dels comandaments que sembla que poden ajudar a resoldre el problema. He buscat i rebuscat a la xarxa però no dono amb la solució. # modprobe -l | grep iwlagn kernel/drivers/net/wireless/ iwlwifi/iwlagn.ko root@debian:/home/alfons# ifconfig wlan0 up root@debian:/home/alfons# dmesg | grep wlan [20317.076795] ADDRCONF(NETDEV_UP): wlan0: link is not ready root@debian:/home/alfons# dmesg | grep iwl3945 [7.003289] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [7.003292] iwl3945: Copyright(c) 2003-2011 Intel Corporation [7.003479] iwl3945 :06:00.0: PCI INT A - GSI 18 (level, low) - IRQ 18 [7.003495] iwl3945 :06:00.0: setting latency timer to 64 [7.058840] iwl3945 :06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [7.058844] iwl3945 :06:00.0: Detected Intel Wireless WiFi Link 3945ABG [7.058996] iwl3945 :06:00.0: irq 47 for MSI/MSI-X [20317.003552] iwl3945 :06:00.0: loaded firmware version 15.32.2.9 Aquí adjunto una part de /var/log/messages Dec 26 12:10:50 debian kernel: [7.003289] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s Dec 26 12:10:50 debian kernel: [7.003292] iwl3945: Copyright(c) 2003-2011 Intel Corporation Dec 26 12:10:50 debian kernel: [7.003479] iwl3945 :06:00.0: PCI INT A - GSI 18 (level, low) - IRQ 18 Dec 26 12:10:50 debian kernel: [7.058840] iwl3945 :06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels Dec 26 12:10:50 debian kernel: [7.058844] iwl3945 :06:00.0: Detected Intel Wireless WiFi Link 3945ABG Dec 26 17:49:16 debian kernel: [20317.003552] iwl3945 :06:00.0: loaded firmware version 15.32.2.9 Dec 26 17:49:16 debian kernel: [20317.076795] ADDRCONF(NETDEV_UP): wlan0: link is not ready root@debian:/home/alfons# lsmod Module Size Used by ip6t_LOG 12609 4 xt_hl 12449 6 ip6t_rt12499 3 nf_conntrack_ipv6 13316 7 nf_defrag_ipv6 12788 1 nf_conntrack_ipv6 ipt_REJECT 12502 1 ipt_LOG12605 5 xt_limit 12638 12 xt_tcpudp 12570 18 xt_addrtype12557 4 xt_state 12503 14 ip6table_filter12540 1 ip6_tables 22175 3 ip6t_LOG,ip6t_rt,ip6table_filter nf_conntrack_netbios_ns12445 0 nf_conntrack_broadcast12365 1 nf_conntrack_netbios_ns nf_nat_ftp 12460 0 nf_nat 18242 1 nf_nat_ftp nf_conntrack_ipv4 14078 9 nf_nat nf_defrag_ipv4 12483 1 nf_conntrack_ipv4 nf_conntrack_ftp 12605 1 nf_nat_ftp nf_conntrack 52720 8 nf_conntrack_ipv6,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp iptable_filter 12536 1 ip_tables 22042 1 iptable_filter x_tables 19028 13 ip6t_LOG,xt_hl,ip6t_rt,ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables acpi_cpufreq 12935 1 mperf 12453 1 acpi_cpufreq cpufreq_stats 12866 0 cpufreq_powersave 12454 0 cpufreq_conservative13147 0 cpufreq_userspace 12576 0 uinput 17440 1 loop 22597 0 firewire_sbp2 18077 0 snd_hda_codec_realtek 272344 1 arc4 12458 2 snd_hda_codec_idt 53748 1 joydev 17266 0 iwl394551641 0 iwl_legacy 48145 1 iwl3945 tifm_7xx1 12923 0 pcmcia 32691 0 mac80211 183093 2 iwl3945,iwl_legacy cfg80211 132703 3 iwl3945,iwl_legacy,mac80211 snd_hda_intel 26182 4 tifm_core 13365 1 tifm_7xx1 sony_laptop36225 0 snd_hda_codec 72920 3 snd_hda_codec_realtek,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13186 1 snd_hda_codec rfkill 19012 2 cfg80211,sony_laptop snd_pcm63744 3 snd_hda_intel,snd_hda_codec snd_timer 22917 2 snd_pcm yenta_socket 22899 0 nouveau 521365 2 ttm48725 1 nouveau uvcvideo 57788 0 drm_kms_helper 27227 1 nouveau videodev 70858 1 uvcvideo drm 167371 4 nouveau,ttm,drm_kms_helper media 18148 2 uvcvideo,videodev v4l2_compat_ioctl3216567 1 videodev i2c_algo_bit 12841 1 nouveau ac 12624 0 mxm_wmi12473 1 nouveau iTCO_wdt 17081 0 snd52798 13
Point de montage usb étrange
Bonjour,
Mon téléphone branché comme périphérique ubs se monte sur le point de montage
/media/lar}
\end{d
(avec même un saut de ligne mais ce n'est pas cela qui importe).
J'aimerais comprendre où debian va chercher cela (1).
Je ne me souviens pas avoir été éditer (en root en plus) quoi que ce soit
relatif aux points de montage ou udev.
Une idée pour m'aider à chercher d'où cela vient ? (2)
Pour compléter, ls -hal /dev/disk/by-label/ me fournit, entre autres,
lrwxrwxrwx 1 root root 10 déc 26 11:23 lar\x7d\x0a\x5cend\x7bd - ../../sdb1
La vraie question est donc peut-être de savoir comment sont définis les labels.
Il est certain que je n'ai pas formaté la mémoire du téléphone et ne lui ai
pas attribué de label.
Merci.
(1)
Je reconnais bien là-dedans un bout de fichier latex, par exemple un extrait
de
\end{tabular}
\end{document}
mais cela ne m'aide pas à comprendre d'où cela vient.
(2)
J'insiste, je ne demande pas comment imposer un autre nom de point de montage
pour ce périphérique, je sais le faire (et ne l'ai pas fait); je voudrais
juste comprendre où mon système a été cherché ce truc.
--
Eddy F.
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
vers debian-user-french-requ...@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org
Archive: http://lists.debian.org/201112261240.20149.edfnet-...@yahoo.fr
Kernel panic sur testing
Bonjour, Suite à une mise à jour hier soir, j'ai eu quelques kernel panic de façon relativement aléatoire sur l'installation de testing sur mon macbook. C'est la première fois que je suis confronté à des kernel panic et je ne sais pas trop comment interpréter ces choses là. J'ai fais une photo (désolé pour la qualité qui n'est pas fameuse, mais c'est lisible) http://furry.goldenfish.info/kernel_panic.jpeg J'ai essayé de changer de noyaux (en repassant à la version 3.0), mais le problème s'est produit une nouvelle fois (la photo correspond à cette version du noyaux). Pour l'instant je touche du bois, mais je pense que ça va se produire à nouveau. Je ne sais pas trop comment faire un rapport de bug pour ce problème, si quelqu'un pouvait m'aider pour ça, ça serait l'idéal. Merci d'avance Christophe -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4ef885ef.4050...@goldenfish.info
Re: Point de montage usb étrange
Eddy F., 2011-12-26 12:40+0100:
Une idée pour m'aider à chercher d'où cela vient ? (2)
De l'étiquette du système de fichiers, comme tu l'avais soupçonné.
La vraie question est donc peut-être de savoir comment sont définis les
labels.
Dans le système de fichiers, cf. les options des différents mkfs.*.
Je reconnais bien là-dedans un bout de fichier latex, par exemple un extrait
de
\end{tabular}
\end{document}
mais cela ne m'aide pas à comprendre d'où cela vient.
Manifestement d'une corruption du système de fichiers, parce que pour
qu'un bout de contenu de fichier se retrouve dans l'étiquette du SF il a
dû lui en arriver une sévère…
--
,--.
: /` ) Tanguy Ortolo xmpp:tan...@ortolo.eu irc://irc.oftc.net/Elessar
| `-'Debian Maintainer
\_
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
vers debian-user-french-requ...@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org
Archive: http://lists.debian.org/jda5oe$mql$1...@dough.gmane.org
Re: Kernel panic sur testing
On Mon, 26 Dec 2011 15:34:23 +0100 Goldy go...@goldenfish.info wrote: C'est la première fois que je suis confronté à des kernel panic et je ne sais pas trop comment interpréter ces choses là. Il faut en faire une mauvaise interprétation. J'ai essayé de changer de noyaux (en repassant à la version 3.0), mais le problème s'est produit une nouvelle fois (la photo correspond à cette version du noyaux). Les kworkers sont des placeholders pour les threads du kernel,soit la majorité de ses traitements (c'est pour cette raison qu'un KP provoque un trace, sinon on ne saurait pas où donner de la tête). Apparemment quelque chose ayant trait au WiFi (IEEE802.11) a fait capoter le thread. Il faut que tu vérifies: * s'il faut un firmware pour ta Cte, * s'il est chargé, * s'il est à jour, * quel est le driver chargé, et s'il ne peut pas y avoir un conflit entre 2 drivers différents, * quels sont les switches du driver nécessaires au chipset de ta Cte, en commençant par 'gader s'il n'y en a pas un pour le debugging histoire d'avoir des traces dans les logs, * que ton macbook n'a pas ses règles. Pour l'instant je touche du bois, mais je pense que ça va se produire à nouveau. Le don de double-vue, c'est courant... surtout le lendemain de noël. Je ne sais pas trop comment faire un rapport de bug pour ce problème, si quelqu'un pouvait m'aider pour ça, ça serait l'idéal. Avant de considérer que c'est un bug il faut vérifier que tout est fait dans les règles. -- Lavish spending can be disastrous. Don't buy any lavishes for a while. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20111226171140.7a1286a0@anubis.defcon1
Re: Point de montage usb étrange
Le lundi 26 décembre 2011 17:01:18, Tanguy Ortolo a écrit :
Eddy F., 2011-12-26 12:40+0100:
Une idée pour m'aider à chercher d'où cela vient ? (2)
De l'étiquette du système de fichiers, comme tu l'avais soupçonné.
La vraie question est donc peut-être de savoir comment sont définis les
labels.
Dans le système de fichiers, cf. les options des différents mkfs.*.
Oui mais la commande
mlabel -si /dev/sdb1 ::
me dit « Volume has no label ».
Je reconnais bien là-dedans un bout de fichier latex, par exemple un
extrait de
\end{tabular}
\end{document}
mais cela ne m'aide pas à comprendre d'où cela vient.
Manifestement d'une corruption du système de fichiers, parce que pour
qu'un bout de contenu de fichier se retrouve dans l'étiquette du SF il a
dû lui en arriver une sévère…
Mouais. Sans compter une utilisation d'espace que je ne parviens pas à
m'expliquer. M'en vais sauvegarder le contenu de la carte puis la reformater.
J'en profiterai pour lui donner un label qui aura du sens pour moi.
Merci.
--
Eddy F.
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
vers debian-user-french-requ...@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org
Archive: http://lists.debian.org/201112261725.50859.edfnet-...@yahoo.fr
Impossible de réinstaller google-chrome
Bonsoir à tous, Je suis sous Debian Lenny, bureau KDE 3. Alors que Google-Chrome fonctionnait très bien, d'un coup il n'affichait plus correctement les pages web. Je l'ai donc supprimé par la commande : aptitude remove google-chrome-stable Maintenant, que ce soit avec apt-get, aptitude, synaptic, dpkg (.deb), je ne peux plus l'installer et voici les messages d'erreur : - Certains paquets ne peuvent être installés. Ceci peut signifier que vous avez demandé l'impossible, ou bien, si vous utilisez la distribution unstable, que certains paquets n'ont pas encore été créés ou ne sont pas sortis d'Incoming. L'information suivante devrait vous aider à résoudre la situation : Les paquets suivants contiennent des dépendances non satisfaites : google-chrome-stable: Dépend: libasound2 ( 1.0.22) mais 1.0.16-2 devra être installé Dépend: libc6 (= 2.11) mais 2.7-18lenny7 devra être installé Dépend: libcups2 (= 1.4.0) mais 1.3.8-1+lenny9 devra être installé Dépend: libdbus-1-3 (= 1.2.14) mais 1.2.1-5+lenny2 devra être installé Dépend: libfontconfig1 (= 2.8.0) mais 2.6.0-3 devra être installé Dépend: libfreetype6 (= 2.3.9) mais 2.3.7-2+lenny5 devra être installé Dépend: libgconf2-4 (= 2.27.0) mais 2.22.0-1 devra être installé Dépend: libgcrypt11 (= 1.4.2) mais 1.4.1-1 devra être installé Dépend: libglib2.0-0 (= 2.18.0) mais 2.16.6-3 devra être installé Dépend: libgtk2.0-0 (= 2.18.0) mais 2.12.12-1~lenny2 devra être installé Dépend: libnspr4-0d (= 4.7.3-0ubuntu1~) mais 4.7.1-5 devra être installé ou libnspr4 (= 4.8.7-0ubuntu1) mais il n'est pas installable Dépend: libstdc++6 (= 4.4.0) mais 4.3.2-1.1 devra être installé Dépend: libatk1.0-0 (= 1.30.0) mais 1.22.0-1 devra être installé E: Paquets défectueux - et plus de possibilités ... Merci d'une aide ! ajh -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201112262326.59059.ajh.val...@free.fr
Re: Impossible de réinstaller google-chrome
Salut, Le 26/12/2011 18:26, ajh.val...@free.fr a écrit : Je suis sous Debian Lenny, bureau KDE 3. Lenny, c'est oldstable, et ne le sera même plus dans un peu plus d'un mois (« Moritz Muehlenhoff a rappelé que le suivi en sécurité de Debian GNU/Linux 5.0 « Lenny » s'achèvera le 6 février 2012. » [0]). 0 : http://www.debian.org/News/weekly/2011/15/#dsa aptitude remove google-chrome-stable Maintenant, que ce soit avec apt-get, aptitude, synaptic, dpkg (.deb), je ne peux plus l'installer Ce n'est pas un paquet de l'archive Debian, je ne sais pas d'où il vient, mais si tu veux l'installer sur Lenny, il va falloir trouver la version qui convient. Il y a bien sûr la sage solution de passer à Squeeze (la version stable de Debian) avant la fin du suivi en sécurité de Lenny, et d'y installer par exemple Chromium (la version libre du navigateur de Gogole) qui est inclus dans Debian, ou le paquet d'une autre origine que tu essayes d'installer. Amicalement David signature.asc Description: OpenPGP digital signature
Re: ¡¡¡ Felicidades !!!
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 José Manuel (EB8CXW) escribió: El 24/12/11 14:53, Ricardo Adolfo Sánchez Arboleda escribió: 2011/12/24 enodisarpiz enodisar...@ziprasidone.com.ar On Sat, Dec 24, 2011 at 12:28:37PM +0100, Lucas Sánchez Sagrado wrote: En Sat, 24 Dec 2011 11:47:35 +0100, Ramses Buenas... Felices fiestas y buena entrada y salida de años a tod@s. Un saludete - -- Si los tontos volaran, el cielo se oscurecería No me envié correos en formatos propietarios http://www.gnu.org/philosophy/no-word-attachments.es.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJO+DQwAAoJEOWNzQnqy+fzZkwIAIMxVICl1UG7q2uwdX9i5EEw G7ZBLjQ/1QDO9+hDxnuDidiW7ylcTUcRYsmeoMEjfN8QQtkebLm+2DnDbbf6OpAS RFxHbu+RM3d6U8Wb+bceGRIO2zSiIR3TPHRvAlQhy8ZfvQGcD2+OK8Ja7vHA5WqG bMmSv3OS0ajoCwmUPlg/kYigyj1g6HY1gr3JpuXhpFGNP+lYeRSwocdW/VNJ3Nai /1XnlA1FWASOYByYs7Ahz8uattfo/PGjJpDiSTZWL63nZHZJgc2X2YU1uRC0C0gg iqowZslUEyJSZtS36dedcRUPy41SXoo3j2L/+fU/GGaHz7xR9y1tnrlmPt+Y+4A= =Kytg -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0-smtp410f080b8f9c49ffdea715fb1...@phx.gbl
Re: [OT]GNOME 3 en Debian Wheezy?
El 21/12/2011 13:29, Camaleón noela...@gmail.com escribió: El Mon, 19 Dec 2011 15:57:54 +0100, dayer escribió: El día 16 de diciembre de 2011 16:40, Camaleón noela...@gmail.com escribió: El Tue, 13 Dec 2011 21:43:52 +0100, Lucas Sánchez Sagrado escribió: Lo que no te gusta es gnome-shell no GNOME3 ;-) Y eso que el gnome-shell de openSUSE está muy pulido... En Debian Squeeze estoy genial con GNOME 2, pero ¿se Sí, lo llevará. Seguramente GNOME3 con gnome-shell en su versión 3.2 o la 3.4. Espero que sea la 3.4, que llevará multi-seat activo ;-) Como ya han dicho algunos de ustedes, es cuestión de acostumbrarse, además de que llegue a estar completa la migración de GNOME 2 a GNOME 3 y en una versión que permita más personalizaciones, como la 3.2 o superiores. No me parece justo comparar el GNOME 3 que hay a día de hoy en «testing» con el que está en Arch o Fedora 16. En estas últimas distribuciones las versiones son más recientes que las de Debian y se puede, por ejemplo, añadir extensiones. Creo que el GNOME de Sid está más actualizado. Saludos, -- Camaleón Gnome 3 lleva un completo manual de ayuda, que tras dedicarle unos minutos, nos facilitará enormemente la vida dentro del nuevo entorno. En poco menos de 1 hora podemos estar trabajando con el entorno, utilizando sus teclas rápidas y atajos de manera eficiente. Yo no vuelvo a Gnome 2 y mucho menos voy a cambiar de escritorio, bien es cierto que necesita algunas correcciones, pero... ¿qué no necesita de algunas correcciones? --- Saludos, Javier Silva.
Re: splash imagen
Hola, Trujillo Carmona, Antonio escribió, El 23/12/11 12:54: Feliz Saturnalia. He creado un sistema con debian para arranque por pxe, va muy bien. He metido una imagen gráfica de inicio con el vesamenu.c32 y perfecto. pero no se como poner la imagen de arranque en el nucleo. me refiero a la que se pone en las opciones de splash : append initrd=aulas-i386/initrd.img quiet splash=silent console=tty10 root=/dev/nfs ip=dhcp boot=nfs nfsr ¿Donde se pone?, que caracteristicas de be de tener? Lo he instalado con wheezy (porque necesito el paquete spice-client) y en esta distribución los paquetes splasy y usplash no están (solo están en la obsoleta). P.D. como es un proyecto del curro no podre leer las respuestas hasta el martes o el miércoles que viene. no os lo toméis a mal. En wheeze tienes empaquetados gfxboot y plymouth para lo que comentas. Quizás te puedan servir. Luego si quieres decorar el terminal, puedes usar el fbsplash de gentoo: http://jeandamiendurand.free.fr/debian/splashutils/ ciao -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef84a17.9070...@gmail.com
Web mail multicuentas
Buenos Dias Tengo un seridor de mails instalado desde ace unos años con un webmail (squirrel mail) anda todo ok lo que nesesitaria es remplazar, adicionar o agregar un plugin al squirrel para tener webmail multicuentas alguien conoce algo por el estilo , por que estado buscando y no encuentro lo que nesesito desde ya muchas gracias -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CALvB54YciviYsnxexQSWDUeOd6sWfxXi61TAoCR=wbwhyom...@mail.gmail.com
Re: Web mail multicuentas
Creo que la forma mas optima de hacer esto en realidad es no usar varias cuentas, sino forwards o alias para una sola cuenta. Asi un mismo usuario puede enviar y recibir correos de virias direcciones en una sola cuenta saludos.. R El día 26 de diciembre de 2011 10:14, Cristian Mitchell mitchell6...@gmail.com escribió: Buenos Dias Tengo un seridor de mails instalado desde ace unos años con un webmail (squirrel mail) anda todo ok lo que nesesitaria es remplazar, adicionar o agregar un plugin al squirrel para tener webmail multicuentas alguien conoce algo por el estilo , por que estado buscando y no encuentro lo que nesesito desde ya muchas gracias -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/calvb54yciviysnxexqswdueod6swfxxi61taocrwbwhyom...@mail.gmail.com -- Rodolfo D. Arce S. web: rodolfoarce.com twitter: @rodolfoarces -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cahgppmvjqrtfaeus33q0-+mhcy+uxy9pufvfwwc+dhrjbq+...@mail.gmail.com
Re: Web mail multicuentas
El día 26 de diciembre de 2011 10:16, Rodolfo D. Arce S. rodolfo.arc...@gmail.com escribió: Creo que la forma mas optima de hacer esto en realidad es no usar varias cuentas, sino forwards o alias para una sola cuenta. Asi un mismo usuario puede enviar y recibir correos de virias direcciones en una sola cuenta saludos.. R El día 26 de diciembre de 2011 10:14, Cristian Mitchell mitchell6...@gmail.com escribió: Buenos Dias Tengo un seridor de mails instalado desde ace unos años con un webmail (squirrel mail) anda todo ok lo que nesesitaria es remplazar, adicionar o agregar un plugin al squirrel para tener webmail multicuentas alguien conoce algo por el estilo , por que estado buscando y no encuentro lo que nesesito desde ya muchas gracias -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/calvb54yciviysnxexqswdueod6swfxxi61taocrwbwhyom...@mail.gmail.com -- Rodolfo D. Arce S. web: rodolfoarce.com twitter: @rodolfoarces El tema es que forware o alias es que me ace una galleta de mails en una sola cuenta lo que nesesito es que siga todo donde llego lo que busco es tipo el thunderbird que mantiene todo donde esta pero lo veo en una sola pantala pero diferntes opciones -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CALvB54Zcm0zD=g8fpuhib0bzfko9luwivzxp0g09q4wnxg1...@mail.gmail.com
Instalar IBM x3550 M3 en Debian Squeeze
Hola a todos. Estoy intentando instalar Squeeze en un Servidor Debian con una placa de RAID 9240-4i. Hace poco tuve un problema que no me detectaba los discos durante la instalación pero era por una mala configuración del RAID en la BIOS. Ahora ya los detecta, pero cuando creo las particiones y comienza a intentar formatearlas me da el siguiente error: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Probé realizar la instalación de Debian Testing y funciona correctamente, pero el problema que yo necesito utilizar Debian Stable. Yo creo que es un problema con el kernel. ¿Qué alternativas puedo llegar a realizar? ¿Puedo instalar Squeeze pero con el kernel 3.0? O sea, ¿viene alguna imagen armada ya con ese kernel? La otra idea que se me ocurre es instalar Testing y después realizar un downgrade a Stable. Ya lo probé, pero tengo problemas con algunos paquetes como por ejemplo grub. ¿Alguien tiene alguna otra idea mejor? Muchas gracias. Saludos. Mauro Sánchez. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzr3p2tpnporexlfkaduozd+cblokem3rvoge3z1h+...@mail.gmail.com
como montar un mp4 player en debian 6
Estimados amigos compre para mi hija un mp4 player chino con 4Gigas de memoria como venia con conector usb lo conecte para copiar las fotos que se había tomado, al cabo de unos segundos reconoce el dispositivo de almacenamiento pero no me permite ver el contenido en las carpetas. como es la correcta manera de montar este dispositivo de almacenamiento saludos @cvargasc
Re: como montar un mp4 player en debian 6
El día 26 de diciembre de 2011 15:39, Constantino Vargas consvar...@gmail.com escribió: Estimados amigos compre para mi hija un mp4 player chino con 4Gigas de memoria como venia con conector usb lo conecte para copiar las fotos que se había tomado, al cabo de unos segundos reconoce el dispositivo de almacenamiento pero no me permite ver el contenido en las carpetas. como es la correcta manera de montar este dispositivo de almacenamiento saludos @cvargasc Deberías empezar por dar mas información ( Aquí no hay adivinos aunque a veces lo parezca :-) ). ¿Por qué dices que lo reconoce? enchufa el aparato y ejecuta el comando dmesg y manda la salida (la parte final que se refiere al aparato) a la lista. S2. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAGw=rHgcy1Uzn_wGvwYwTRcHL-7m0y3ilwoqxz90y2ch...@mail.gmail.com
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 11:22, Mauro Sánchez maur...@gmail.com escribió: Hola a todos. Estoy intentando instalar Squeeze en un Servidor Debian con una placa de RAID 9240-4i. Hace poco tuve un problema que no me detectaba los discos durante la instalación pero era por una mala configuración del RAID en la BIOS. Ahora ya los detecta, pero cuando creo las particiones y comienza a intentar formatearlas me da el siguiente error: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Probé realizar la instalación de Debian Testing y funciona correctamente, pero el problema que yo necesito utilizar Debian Stable. Yo creo que es un problema con el kernel. ¿Qué alternativas puedo llegar a realizar? ¿Puedo instalar Squeeze pero con el kernel 3.0? O sea, ¿viene alguna imagen armada ya con ese kernel? La otra idea que se me ocurre es instalar Testing y después realizar un downgrade a Stable. Ya lo probé, pero tengo problemas con algunos paquetes como por ejemplo grub. ¿Alguien tiene alguna otra idea mejor? Muchas gracias. Saludos. Mauro Sánchez. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzr3p2tpnporexlfkaduozd+cblokem3rvoge3z1h+...@mail.gmail.com Hola: raro lo que te pasa. por que en el laburo instalamos 9 sin problemas comentame como preparaste el raid que opciones usas al instalar debian la unica diferencia qua aplique al instalar es que use raid por software para la portabilidad de los disco tenes discos sata o sas? -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/calvb54bbduos3i4doan_wum9azj+_lso6rfvmy3bcyh0hsu...@mail.gmail.com
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 11:52, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 11:22, Mauro Sánchez maur...@gmail.com escribió: Hola a todos. Estoy intentando instalar Squeeze en un Servidor Debian con una placa de RAID 9240-4i. Hace poco tuve un problema que no me detectaba los discos durante la instalación pero era por una mala configuración del RAID en la BIOS. Ahora ya los detecta, pero cuando creo las particiones y comienza a intentar formatearlas me da el siguiente error: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Probé realizar la instalación de Debian Testing y funciona correctamente, pero el problema que yo necesito utilizar Debian Stable. Yo creo que es un problema con el kernel. ¿Qué alternativas puedo llegar a realizar? ¿Puedo instalar Squeeze pero con el kernel 3.0? O sea, ¿viene alguna imagen armada ya con ese kernel? La otra idea que se me ocurre es instalar Testing y después realizar un downgrade a Stable. Ya lo probé, pero tengo problemas con algunos paquetes como por ejemplo grub. ¿Alguien tiene alguna otra idea mejor? Muchas gracias. Saludos. Mauro Sánchez. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzr3p2tpnporexlfkaduozd+cblokem3rvoge3z1h+...@mail.gmail.com Hola: raro lo que te pasa. por que en el laburo instalamos 9 sin problemas comentame como preparaste el raid que opciones usas al instalar debian la unica diferencia qua aplique al instalar es que use raid por software para la portabilidad de los disco tenes discos sata o sas? Hola Cristian. Utilicé RAID 5 por hardware con las opciones por defecto que me propuso durante su creación. Tengo 3 discos SAS 6Gb de 600 GB cada uno. ¿Alguna sugerencia para la configuración del RAID? Gracias. Mauro. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMCF3yxiavhW53L4CR9ELMi-JQ0-EtziLdÏxabzvblfng...@mail.gmail.com
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 11:57, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 11:52, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 11:22, Mauro Sánchez maur...@gmail.com escribió: Hola a todos. Estoy intentando instalar Squeeze en un Servidor Debian con una placa de RAID 9240-4i. Hace poco tuve un problema que no me detectaba los discos durante la instalación pero era por una mala configuración del RAID en la BIOS. Ahora ya los detecta, pero cuando creo las particiones y comienza a intentar formatearlas me da el siguiente error: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Probé realizar la instalación de Debian Testing y funciona correctamente, pero el problema que yo necesito utilizar Debian Stable. Yo creo que es un problema con el kernel. ¿Qué alternativas puedo llegar a realizar? ¿Puedo instalar Squeeze pero con el kernel 3.0? O sea, ¿viene alguna imagen armada ya con ese kernel? La otra idea que se me ocurre es instalar Testing y después realizar un downgrade a Stable. Ya lo probé, pero tengo problemas con algunos paquetes como por ejemplo grub. ¿Alguien tiene alguna otra idea mejor? Muchas gracias. Saludos. Mauro Sánchez. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzr3p2tpnporexlfkaduozd+cblokem3rvoge3z1h+...@mail.gmail.com Hola: raro lo que te pasa. por que en el laburo instalamos 9 sin problemas comentame como preparaste el raid que opciones usas al instalar debian la unica diferencia qua aplique al instalar es que use raid por software para la portabilidad de los disco tenes discos sata o sas? Hola Cristian. Utilicé RAID 5 por hardware con las opciones por defecto que me propuso durante su creación. Tengo 3 discos SAS 6Gb de 600 GB cada uno. ¿Alguna sugerencia para la configuración del RAID? Gracias. Mauro. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMCF3yxiavhW53L4CR9ELMi-JQ0-EtziLdÏxabzvblfng...@mail.gmail.com armaste despues de hacer el raid los discos virtuales? dentro de la bios de las SCSI -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CALvB54Z4grb615qLu4=OvdAODdk=y5e4pchzf8vtu+centr...@mail.gmail.com
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 12:09, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 11:57, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 11:52, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 11:22, Mauro Sánchez maur...@gmail.com escribió: Hola a todos. Estoy intentando instalar Squeeze en un Servidor Debian con una placa de RAID 9240-4i. Hace poco tuve un problema que no me detectaba los discos durante la instalación pero era por una mala configuración del RAID en la BIOS. Ahora ya los detecta, pero cuando creo las particiones y comienza a intentar formatearlas me da el siguiente error: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Probé realizar la instalación de Debian Testing y funciona correctamente, pero el problema que yo necesito utilizar Debian Stable. Yo creo que es un problema con el kernel. ¿Qué alternativas puedo llegar a realizar? ¿Puedo instalar Squeeze pero con el kernel 3.0? O sea, ¿viene alguna imagen armada ya con ese kernel? La otra idea que se me ocurre es instalar Testing y después realizar un downgrade a Stable. Ya lo probé, pero tengo problemas con algunos paquetes como por ejemplo grub. ¿Alguien tiene alguna otra idea mejor? Muchas gracias. Saludos. Mauro Sánchez. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzr3p2tpnporexlfkaduozd+cblokem3rvoge3z1h+...@mail.gmail.com Hola: raro lo que te pasa. por que en el laburo instalamos 9 sin problemas comentame como preparaste el raid que opciones usas al instalar debian la unica diferencia qua aplique al instalar es que use raid por software para la portabilidad de los disco tenes discos sata o sas? Hola Cristian. Utilicé RAID 5 por hardware con las opciones por defecto que me propuso durante su creación. Tengo 3 discos SAS 6Gb de 600 GB cada uno. ¿Alguna sugerencia para la configuración del RAID? Gracias. Mauro. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMCF3yxiavhW53L4CR9ELMi-JQ0-EtziLdÏxabzvblfng...@mail.gmail.com armaste despues de hacer el raid los discos virtuales? dentro de la bios de las SCSI Sí, lo armé y me quedó un disco virtual de 1.089 TB. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzv-2vxd7zu2a7nienyerabyksmq6-4ncee6hmkr_r...@mail.gmail.com
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 12:14, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 12:09, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 11:57, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 11:52, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 11:22, Mauro Sánchez maur...@gmail.com escribió: Hola a todos. Estoy intentando instalar Squeeze en un Servidor Debian con una placa de RAID 9240-4i. Hace poco tuve un problema que no me detectaba los discos durante la instalación pero era por una mala configuración del RAID en la BIOS. Ahora ya los detecta, pero cuando creo las particiones y comienza a intentar formatearlas me da el siguiente error: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Probé realizar la instalación de Debian Testing y funciona correctamente, pero el problema que yo necesito utilizar Debian Stable. Yo creo que es un problema con el kernel. ¿Qué alternativas puedo llegar a realizar? ¿Puedo instalar Squeeze pero con el kernel 3.0? O sea, ¿viene alguna imagen armada ya con ese kernel? La otra idea que se me ocurre es instalar Testing y después realizar un downgrade a Stable. Ya lo probé, pero tengo problemas con algunos paquetes como por ejemplo grub. ¿Alguien tiene alguna otra idea mejor? Muchas gracias. Saludos. Mauro Sánchez. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzr3p2tpnporexlfkaduozd+cblokem3rvoge3z1h+...@mail.gmail.com Hola: raro lo que te pasa. por que en el laburo instalamos 9 sin problemas comentame como preparaste el raid que opciones usas al instalar debian la unica diferencia qua aplique al instalar es que use raid por software para la portabilidad de los disco tenes discos sata o sas? Hola Cristian. Utilicé RAID 5 por hardware con las opciones por defecto que me propuso durante su creación. Tengo 3 discos SAS 6Gb de 600 GB cada uno. ¿Alguna sugerencia para la configuración del RAID? Gracias. Mauro. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMCF3yxiavhW53L4CR9ELMi-JQ0-EtziLdÏxabzvblfng...@mail.gmail.com armaste despues de hacer el raid los discos virtuales? dentro de la bios de las SCSI Sí, lo armé y me quedó un disco virtual de 1.089 TB. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzv-2vxd7zu2a7nienyerabyksmq6-4ncee6hmkr_r...@mail.gmail.com lo que no me queda claro es el disco te lo reconoce o no en la instalacion de queeze -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/calvb54yrqxndxv9xzlpzsxmtc75bzu3mmjxwm8ajyv78jns...@mail.gmail.com
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 12:26, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 12:22, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 12:14, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 12:09, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 11:57, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 11:52, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 11:22, Mauro Sánchez maur...@gmail.com escribió: Hola a todos. Estoy intentando instalar Squeeze en un Servidor Debian con una placa de RAID 9240-4i. Hace poco tuve un problema que no me detectaba los discos durante la instalación pero era por una mala configuración del RAID en la BIOS. Ahora ya los detecta, pero cuando creo las particiones y comienza a intentar formatearlas me da el siguiente error: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Probé realizar la instalación de Debian Testing y funciona correctamente, pero el problema que yo necesito utilizar Debian Stable. Yo creo que es un problema con el kernel. ¿Qué alternativas puedo llegar a realizar? ¿Puedo instalar Squeeze pero con el kernel 3.0? O sea, ¿viene alguna imagen armada ya con ese kernel? La otra idea que se me ocurre es instalar Testing y después realizar un downgrade a Stable. Ya lo probé, pero tengo problemas con algunos paquetes como por ejemplo grub. ¿Alguien tiene alguna otra idea mejor? Muchas gracias. Saludos. Mauro Sánchez. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzr3p2tpnporexlfkaduozd+cblokem3rvoge3z1h+...@mail.gmail.com Hola: raro lo que te pasa. por que en el laburo instalamos 9 sin problemas comentame como preparaste el raid que opciones usas al instalar debian la unica diferencia qua aplique al instalar es que use raid por software para la portabilidad de los disco tenes discos sata o sas? Hola Cristian. Utilicé RAID 5 por hardware con las opciones por defecto que me propuso durante su creación. Tengo 3 discos SAS 6Gb de 600 GB cada uno. ¿Alguna sugerencia para la configuración del RAID? Gracias. Mauro. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMCF3yxiavhW53L4CR9ELMi-JQ0-EtziLdÏxabzvblfng...@mail.gmail.com armaste despues de hacer el raid los discos virtuales? dentro de la bios de las SCSI Sí, lo armé y me quedó un disco virtual de 1.089 TB. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzv-2vxd7zu2a7nienyerabyksmq6-4ncee6hmkr_r...@mail.gmail.com lo que no me queda claro es el disco te lo reconoce o no en la instalacion de queeze Hola Cristian. Gracias por responder. Sí, a los discos los reconoce y yo llego a crear las particiones pero al momento de comenzar a formateralas es cuando da ese error que copié en el primer mail. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3ywrmmnrxasvyp0mmm_vyqydu2nf1qef+h-gcdeoz4t...@mail.gmail.com en el momento que va a formatear , en la instalacion fijate que te permite abrir una consola en f2 fijate hacer mkfs -t (el formato elegido ext3 4 etc) /dev/sda1 (ejemplo) para ver que hace con esto nos damos cuenta si es error de instalacion o configuracion de hardware no soportada -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CALvB54ai4YuoELk1SX8gk91ks2-WfGSjz=ryy36r9kngsct...@mail.gmail.com
Re: Software web (simil webmin) para reiniciar servicio
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Carlos Miranda Molina (Mstaaravin) escribió: Buenas... Alguien conoce algún software parecido a webmin que me permita dar acceso via web a un usuario y que sólo tenga permitido reiniciar un determinado servicio? Aunque webmin permite hacer esto (crear un usuario restringido) y en combinación con los custom commands puede ver sólo lo que yo quiero que vea... Pero esta funcionalidad tiene una falla, permite al usuario poder editar el comando (/etc/init.d/servicio start|stop|restart) y como webmin ejecutacomo root es un peligro (tampoco se puede esperar menos con el historial de webmin) Tampoco quiero darle shell porque sería complicar las cosas.. Buenas... Y eso de ejecutar una serie de peticiones al servidor ( en un orden ) para que haga una acción determinada. ¿te puede valer?. (no encuentro lo que te digo, pero seguro que alguien nos ayuda, es hacer unas peticiones vía web en el orden que tu las has definido, si se cumple hace la acción que pusiste) He visto esto otro, pero supongo que si has descartado el uso de la shell, este no te gustara. http://ubuntulife.wordpress.com/2010/08/03/sencillo-script-en-bash-para-ejecutar-un-comando-remoto-mediante-ssh/ Evidentemente tendrás que retocarlo, para que solo hagan lo que tu quieres... Saludos Otro para ti - -- Si los tontos volaran, el cielo se oscurecería No me envié correos en formatos propietarios http://www.gnu.org/philosophy/no-word-attachments.es.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJO+JUEAAoJEOWNzQnqy+fzFS8IAIg18dELgcuwPDn0g2dRbOrj w0QqIWx/d2QszsWj6CLz+P4YaxeqI+vUfHOHu63qEzRoff2G8B1EUyhBpsRhyDvQ PdtJ+pNXU0ztvhZ/vwWFZDVII6bdK0YfV6Mc9EOQwsseQjxsIrgAsLtBN61aJDbG sn5DpkNtdm+t5RE8400kt9QhvR5MN5mYXwdrqQHtraz8SHtMihpz2VwlK7ujBXUd FEkdh0uowlw0ZZ0pub+nbsqwyQNIcfq/xKwkTd2PbT3SSyuCNJb8Vbfaty2uViZu sC2SMpHcN9yKPXMF37WHUoTvCwEOeJqOk7sSByH00XxserlXrmfntys/xp0CYcM= =5zcH -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0-smtp1557915533f76511d1083e0b1...@phx.gbl
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 12:31, Cristian Mitchell mitchell6...@gmail.com escribió: en el momento que va a formatear , en la instalacion fijate que te permite abrir una consola en f2 fijate hacer mkfs -t (el formato elegido ext3 4 etc) /dev/sda1 (ejemplo) para ver que hace con esto nos damos cuenta si es error de instalacion o configuracion de hardware no soportada Bueno, ahi intenté hacerlo desde la consola y me da el mismo error que antes: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Después de eso se reinicia el servidor. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMCF3yyNHg4NZRUK2dgdnJgPusyRK1W7QsPG=hdf+vac+qa...@mail.gmail.com
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 12:51, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 12:31, Cristian Mitchell mitchell6...@gmail.com escribió: en el momento que va a formatear , en la instalacion fijate que te permite abrir una consola en f2 fijate hacer mkfs -t (el formato elegido ext3 4 etc) /dev/sda1 (ejemplo) para ver que hace con esto nos damos cuenta si es error de instalacion o configuracion de hardware no soportada Bueno, ahi intenté hacerlo desde la consola y me da el mismo error que antes: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Después de eso se reinicia el servidor. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yynhg4nzruk2dgdnjgpusyrk1w7qspghdf+vac+qa...@mail.gmail.com La unica diferencia entre lo que vos tenes y lo que yo tengo es el modelo de la scsci y la configuracion de el raid de disco por que no porbas con un disco sin raid -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/calvb54ypjs+qzzaauqdhmxrr_usjtponendv_hvcnyx+yhg...@mail.gmail.com
Re: Software web (simil webmin) para reiniciar servicio
2011/12/26 jmramirez (mas_ke_na) mas_ke...@hotmail.com: He visto esto otro, pero supongo que si has descartado el uso de la shell, este no te gustara. http://ubuntulife.wordpress.com/2010/08/03/sencillo-script-en-bash-para-ejecutar-un-comando-remoto-mediante-ssh/ Gracias por responder... shell está descartado, accederían desde windows y no quiero complicarla con putty y demás. Tiene que ser web para que entren (autenticados SSL) y puedan con algún botón stop|start|restart hacer lo que necesitan. Otros usuarios que tienen que hacer lo mismo y ya tienen shell lo hacen a través de sudo con: sudo ALL=(ALL) NOPASSWD: /etc/init.d/catalina.sh Saludos -- La Voluntad es el único motor de nuestros logros http://ngen.com.ar/blog -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cacjp8-rp+dpfhtjtorxxlzjqm6tm0upmeacswcrhnznjlrk...@mail.gmail.com
Re: [OT] Qué netbook recomiendan para usar Debian?
- Original Message - From: Javier Silva To: debian-user-spanish Sent: Sunday, December 25, 2011 4:37 AM Subject: Re: [OT] Qué netbook recomiendan para usar Debian? Este año que entra, veremos ultrabooks sin unidad óptica y con un peso muy contenido. Saludos, Javier Silva. Javier por casualidad conoces que tamaño de pantallas tendrán estas ultrabooks? y porque precio más o menos deben salir? Gracias = || ISMAEL || = PD: No tengo acceso a Internet. Estoy considerando mandar a comprar una para mi hija de 10 años. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/3857aa5c9cb2414aa4703c5929c17...@eicc.citricos.cu
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 13:01, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 12:51, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 12:31, Cristian Mitchell mitchell6...@gmail.com escribió: en el momento que va a formatear , en la instalacion fijate que te permite abrir una consola en f2 fijate hacer mkfs -t (el formato elegido ext3 4 etc) /dev/sda1 (ejemplo) para ver que hace con esto nos damos cuenta si es error de instalacion o configuracion de hardware no soportada Bueno, ahi intenté hacerlo desde la consola y me da el mismo error que antes: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Después de eso se reinicia el servidor. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yynhg4nzruk2dgdnjgpusyrk1w7qspghdf+vac+qa...@mail.gmail.com La unica diferencia entre lo que vos tenes y lo que yo tengo es el modelo de la scsci y la configuracion de el raid de disco por que no porbas con un disco sin raid Hola. Configuré 1 disco sin raid pero no me lo detecta la instalación. Sin embargo probé con la misma configuración de 1 solo disco y sin raid en Debian Testing y sí lo detecta. ¿Será problema de drivers con los discos? Los discos son estos: IBM 600GB 10K 6Gbps SAS 2.5 SFF Slim-HS HDD Gracias. Saludos. Mauro. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yxnow6czvmxdc2akw_pftsoe+fh1soafnt26qh3fmy...@mail.gmail.com
Re: [OT] Qué netbook recomiendan para usar Debian?
El lun, 26 dic, 2011, a las 12:34 , Ismael L. Donis Garcia escribió: - Original Message - From: Javier Silva To: debian-user-spanish Sent: Sunday, December 25, 2011 4:37 AM Subject: Re: [OT] Qué netbook recomiendan para usar Debian? Este año que entra, veremos ultrabooks sin unidad óptica y con un peso muy contenido. Saludos, Javier Silva. Javier por casualidad conoces que tamaño de pantallas tendrán estas ultrabooks? y porque precio más o menos deben salir? Gracias = || ISMAEL || = PD: No tengo acceso a Internet. Estoy considerando mandar a comprar una para mi hija de 10 años. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/3857aa5c9cb2414aa4703c5929c17...@eicc.citricos.cu Me parece que para las ultrabooks hay que esperar un poco para los usuarios finales. Hay que ver si todo el hardware está disponible para Debian. ¿qué les parece? -- Sergio Bessopeanetto Buenos Aires, Argentina Skype: sergio.bess msn: sergieb...@hotmail.com Jabber: sergio.b...@jabber.org -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1324922482.21559.140661016111...@webmail.messagingengine.com
Re: [OT] Qué netbook recomiendan para usar Debian?
El día 26 de diciembre de 2011 19:01, sergio.b...@ymail.com escribió: El lun, 26 dic, 2011, a las 12:34 , Ismael L. Donis Garcia escribió: - Original Message - From: Javier Silva To: debian-user-spanish Sent: Sunday, December 25, 2011 4:37 AM Subject: Re: [OT] Qué netbook recomiendan para usar Debian? Este año que entra, veremos ultrabooks sin unidad óptica y con un peso muy contenido. Saludos, Javier Silva. Javier por casualidad conoces que tamaño de pantallas tendrán estas ultrabooks? y porque precio más o menos deben salir? Se esperan para este año que entra. El tamaño de la pantalla no debería ser mayor de 13,3 o 14, aunque hay fabricantes que desean que existan de 15, aunque supongo que dificilmente se las deberá llamar ultrabooks. Gracias = || ISMAEL || = PD: No tengo acceso a Internet. Estoy considerando mandar a comprar una para mi hija de 10 años. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/3857aa5c9cb2414aa4703c5929c17...@eicc.citricos.cu Me parece que para las ultrabooks hay que esperar un poco para los usuarios finales. Hay que ver si todo el hardware está disponible para Debian. ¿qué les parece? El hardware no parece que vaya a ser muy diferente, salvo que la CPU será ULV, el disco SSD y sin unidad óptica, pero como bien dice Sergio, tal vez sea prudente esperar por si incluyen alguna sorpresa. Para saber algo más sobre estos equipos, podemos dirigirnos a Wikipedia: http://en.wikipedia.org/wiki/Ultrabook Un saludo, Javier Silva. -- Sergio Bessopeanetto Buenos Aires, Argentina Skype: sergio.bess msn: sergieb...@hotmail.com Jabber: sergio.b...@jabber.org -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1324922482.21559.140661016111...@webmail.messagingengine.com -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caog_h5ay7sfddo56gubkhwu-hsm3ptr2oxssquder4k-wsq...@mail.gmail.com
Problemas de reproducción con Exaile
Hola colegas, Siempre he usado Exaile como reproductor de sonido, que lo he tratado de instalar en Squeeze, Mint, Ubuntu, Slackware y en las 4 distros me da el mismo error, cuando reproduce se queda congelado, a tal punto que tengo que darle un killall por consola porque no deja de reproducir la múisica pero bloqueado, he revisado varias listas, Internet y no se cuantos lados y no aparece ningún reporte de Bug, ni siquiera información sobre el tema, a alguien le ocurre lo mismo... Me gustaría dar mas datos sobre el error pero es que no sale nada, simplemente se bloquea, sin error alguno. Alguien me puede decir si le sucede lo mismo? saludos y graxias de antemano -- Lic. Yasniel López Argüez. Administrador de Red. Empresa Servicentros de Cupet. Oficina Central, Avenida 70, No.29, esq. 29b. Buena Vista. Municipio Playa, La Habana. Cuba. Teléfono: 204-0185 Fax: 204-0433 Teléfono: 204-0405 Ext.121 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef8c635.4090...@servi.cupet.cu
Re: Problemas de reproducción con Exaile
El día 26 de diciembre de 2011 20:08, YaSnIeL LóPeZ ArGüEz yasn...@servi.cupet.cu escribió: Hola colegas, Siempre he usado Exaile como reproductor de sonido, que lo he tratado de instalar en Squeeze, Mint, Ubuntu, Slackware y en las 4 distros me da el mismo error, cuando reproduce se queda congelado, a tal punto que tengo que darle un killall por consola porque no deja de reproducir la múisica pero bloqueado, he revisado varias listas, Internet y no se cuantos lados y no aparece ningún reporte de Bug, ni siquiera información sobre el tema, a alguien le ocurre lo mismo... Me gustaría dar mas datos sobre el error pero es que no sale nada, simplemente se bloquea, sin error alguno. Alguien me puede decir si le sucede lo mismo? saludos y graxias de antemano -- Lic. Yasniel López Argüez. Administrador de Red. Empresa Servicentros de Cupet. Oficina Central, Avenida 70, No.29, esq. 29b. Buena Vista. Municipio Playa, La Habana. Cuba. Teléfono: 204-0185 Fax: 204-0433 Teléfono: 204-0405 Ext.121 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef8c635.4090...@servi.cupet.cu Por que no pruebas a lanzarlo desde consola? Sin saber que error te muestra es complicado que se te pueda ayudar. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CA+FbNVjmMD71wixCnePzJeeLgG2jhk8tXmm=0ibr+22u0ce...@mail.gmail.com
Sistema de ficheros clustering
Buenas a tod@s. Cada vez que he tenido que compartir discos entre las máquinas, siempre me he decantado por NFS, con su pros y sus contras, pero ahora necesito montar un cluster de servidores de mapas y dichos servidores van a compartir un espacio de unos 600 Gb donde estará repleto de imágenes. Ante este reto me ha parecido que NFS puede ser un poco arriesgado por aquello de que ambos servidores deberán poder escribir y leer al mismo espacio y que necesito alto rendimiento y fiabilidad. Entonces me estoy planteando algún sistema de ficheros para clustering (ejem: GFS2). Que me recomendais? Saludos. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CA+FbNVisnwxD1kr3Ka5WUfJqN5C¬0ptk2a257ydsvzvbd...@mail.gmail.com
Re: Problemas de reproducción con Exaile
El 26/12/11 14:31, Esteban Torres Rodríguez escribió: El día 26 de diciembre de 2011 20:08, YaSnIeL LóPeZ ArGüEz yasn...@servi.cupet.cu escribió: Hola colegas, Siempre he usado Exaile como reproductor de sonido, que lo he tratado de instalar en Squeeze, Mint, Ubuntu, Slackware y en las 4 distros me da el mismo error, cuando reproduce se queda congelado, a tal punto que tengo que darle un killall por consola porque no deja de reproducir la múisica pero bloqueado, he revisado varias listas, Internet y no se cuantos lados y no aparece ningún reporte de Bug, ni siquiera información sobre el tema, a alguien le ocurre lo mismo... Me gustaría dar mas datos sobre el error pero es que no sale nada, simplemente se bloquea, sin error alguno. Alguien me puede decir si le sucede lo mismo? saludos y graxias de antemano -- Lic. Yasniel López Argüez. Administrador de Red. Empresa Servicentros de Cupet. Oficina Central, Avenida 70, No.29, esq. 29b. Buena Vista. Municipio Playa, La Habana. Cuba. Teléfono: 204-0185 Fax: 204-0433 Teléfono: 204-0405 Ext.121 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef8c635.4090...@servi.cupet.cu Por que no pruebas a lanzarlo desde consola? Sin saber que error te muestra es complicado que se te pueda ayudar. Esa fue mi primera opción, el problema es ese, que no me ningún problema y como dije he buscado y rebuscado... y no existe reporte de bugs ni nada parecido... por si acaso acá pongo lo que me dice cuando lo corro por consola. yasniel@isabella ~ $ exaile INFO: Loading Exaile 0.3.2.1... INFO: Loading settings... INFO: Loading plugins... INFO: Loading collection... INFO: Loading devices... INFO: Loading interface... INFO: Loading main window... INFO: Connecting main window events... INFO: Loading panels... INFO: Connecting panel events... INFO: Done loading main window... INFO: Exaile is shutting down... INFO: Disabling plugins... INFO: Saving state... Como puedes ver todo normal... salu2 -- Lic. Yasniel López Argüez. Administrador de Red. Empresa Servicentros de Cupet. Oficina Central, Avenida 70, No.29, esq. 29b. Buena Vista. Municipio Playa, La Habana. Cuba. Teléfono: 204-0185 Fax: 204-0433 Teléfono: 204-0405 Ext.121 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef8cc14.2090...@servi.cupet.cu
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 15:48, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 13:01, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 12:51, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 12:31, Cristian Mitchell mitchell6...@gmail.com escribió: en el momento que va a formatear , en la instalacion fijate que te permite abrir una consola en f2 fijate hacer mkfs -t (el formato elegido ext3 4 etc) /dev/sda1 (ejemplo) para ver que hace con esto nos damos cuenta si es error de instalacion o configuracion de hardware no soportada Bueno, ahi intenté hacerlo desde la consola y me da el mismo error que antes: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Después de eso se reinicia el servidor. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yynhg4nzruk2dgdnjgpusyrk1w7qspghdf+vac+qa...@mail.gmail.com La unica diferencia entre lo que vos tenes y lo que yo tengo es el modelo de la scsci y la configuracion de el raid de disco por que no porbas con un disco sin raid Hola. Configuré 1 disco sin raid pero no me lo detecta la instalación. Sin embargo probé con la misma configuración de 1 solo disco y sin raid en Debian Testing y sí lo detecta. ¿Será problema de drivers con los discos? Los discos son estos: IBM 600GB 10K 6Gbps SAS 2.5 SFF Slim-HS HDD Gracias. Saludos. Mauro. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yxnow6czvmxdc2akw_pftsoe+fh1soafnt26qh3fmy...@mail.gmail.com Te diria que por que unica diferencia con respecto a los disco que tenemos de difernte es la capasidad lo otro que me llama la atencion es que no te los detecte los discos en la instalacion cuando usas uno solo actualizaste el firmware del equipo por que fue lo primero que isimos y otra que me acabo de dar cuentas es que no tenemos la misma scsi aca la pidieron con un upgrade cache y otro prosesador scsi lo raro es que no te reconosca el disco solo despues de instalar la testing no intentaste ejecutar la instalacion estable para ver si reconoce los disco? -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/calvb54yrszkqpczv4ddo4bt0ovucbjznpzlxpwz7o-h46wf...@mail.gmail.com
Re: Sistema de ficheros clustering
2011/12/26 Esteban Torres Rodríguez mortenol.tor...@gmail.com: Buenas a tod@s. Cada vez que he tenido que compartir discos entre las máquinas, siempre me he decantado por NFS, con su pros y sus contras, pero ahora necesito montar un cluster de servidores de mapas y dichos servidores van a compartir un espacio de unos 600 Gb donde estará repleto de imágenes. Ante este reto me ha parecido que NFS puede ser un poco arriesgado por aquello de que ambos servidores deberán poder escribir y leer al mismo espacio y que necesito alto rendimiento y fiabilidad. Entonces me estoy planteando algún sistema de ficheros para clustering (ejem: GFS2). Que me recomendais? Saludos. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CA+FbNVisnwxD1kr3Ka5WUfJqN5C¬0ptk2a257ydsvzvbd...@mail.gmail.com Cluster puede ser de varias cosas (sono orrible pero bueno) por lo que veo el tullo no es de almacenamiento pero no queda claro de que tipo es de aplicacion de prosesamiento etc. segun sea es lo que te conviene como alamsenamiento, igual tenes que pensar que mucho cluster y un solo punto de almasenamiento ! -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/calvb54a38mnxu5qa2fpjtszeprfnf++amr+ou7js+p_95pi...@mail.gmail.com
Re: [OT] Qué netbook recomiendan para usar Debian?
El lun, 26 dic, 2011, a las 07:18 , Javier Silva escribió: El día 26 de diciembre de 2011 19:01, sergio.b...@ymail.com escribió: El lun, 26 dic, 2011, a las 12:34 , Ismael L. Donis Garcia escribió: - Original Message - From: Javier Silva To: debian-user-spanish Sent: Sunday, December 25, 2011 4:37 AM Subject: Re: [OT] Qué netbook recomiendan para usar Debian? Este año que entra, veremos ultrabooks sin unidad óptica y con un peso muy contenido. Saludos, Javier Silva. Javier por casualidad conoces que tamaño de pantallas tendrán estas ultrabooks? y porque precio más o menos deben salir? Se esperan para este año que entra. El tamaño de la pantalla no debería ser mayor de 13,3 o 14, aunque hay fabricantes que desean que existan de 15, aunque supongo que dificilmente se las deberá llamar ultrabooks. Gracias = || ISMAEL || = PD: No tengo acceso a Internet. Estoy considerando mandar a comprar una para mi hija de 10 años. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/3857aa5c9cb2414aa4703c5929c17...@eicc.citricos.cu Me parece que para las ultrabooks hay que esperar un poco para los usuarios finales. Hay que ver si todo el hardware está disponible para Debian. ¿qué les parece? El hardware no parece que vaya a ser muy diferente, salvo que la CPU será ULV, el disco SSD y sin unidad óptica, pero como bien dice Sergio, tal vez sea prudente esperar por si incluyen alguna sorpresa. Para saber algo más sobre estos equipos, podemos dirigirnos a Wikipedia: http://en.wikipedia.org/wiki/Ultrabook Un saludo, Javier Silva. Acá está la Asus. En principio no parece que vaya a dar problemas pero por las dudas.. http://www.pcworld.com.mx/Articulos/18902.htm -- Sergio Bessopeanetto Buenos Aires, Argentina Skype: sergio.bess msn: sergieb...@hotmail.com Jabber: sergio.b...@jabber.org -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1324942402.32144.140661016185...@webmail.messagingengine.com
Re: Instalar IBM x3550 M3 en Debian Squeeze
El día 26 de diciembre de 2011 17:07, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 15:48, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 13:01, Cristian Mitchell mitchell6...@gmail.com escribió: El día 26 de diciembre de 2011 12:51, Mauro Sánchez maur...@gmail.com escribió: El día 26 de diciembre de 2011 12:31, Cristian Mitchell mitchell6...@gmail.com escribió: en el momento que va a formatear , en la instalacion fijate que te permite abrir una consola en f2 fijate hacer mkfs -t (el formato elegido ext3 4 etc) /dev/sda1 (ejemplo) para ver que hace con esto nos damos cuenta si es error de instalacion o configuracion de hardware no soportada Bueno, ahi intenté hacerlo desde la consola y me da el mismo error que antes: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Después de eso se reinicia el servidor. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yynhg4nzruk2dgdnjgpusyrk1w7qspghdf+vac+qa...@mail.gmail.com La unica diferencia entre lo que vos tenes y lo que yo tengo es el modelo de la scsci y la configuracion de el raid de disco por que no porbas con un disco sin raid Hola. Configuré 1 disco sin raid pero no me lo detecta la instalación. Sin embargo probé con la misma configuración de 1 solo disco y sin raid en Debian Testing y sí lo detecta. ¿Será problema de drivers con los discos? Los discos son estos: IBM 600GB 10K 6Gbps SAS 2.5 SFF Slim-HS HDD Gracias. Saludos. Mauro. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yxnow6czvmxdc2akw_pftsoe+fh1soafnt26qh3fmy...@mail.gmail.com Hola Cristian. Te diria que por que unica diferencia con respecto a los disco que tenemos de difernte es la capasidad lo otro que me llama la atencion es que no te los detecte los discos en la instalacion cuando usas uno solo actualizaste el firmware del equipo No, no actualicé ningún firmware. Me fijé en la web de la placa de RAID ( http://www.lsi.com/support/products/Pages/MegaRAIDSAS9240-4i.aspx ) y hay una actualización de firmware para la misma, ¿la aplico? Yo tengo el firmware de Mar 04, 2011 y hay una versión de Oct 14, 2011. por que fue lo primero que isimos y otra que me acabo de dar cuentas es que no tenemos la misma scsi aca la pidieron con un upgrade cache y otro prosesador scsi lo raro es que no te reconosca el disco solo despues de instalar la testing no intentaste ejecutar la instalacion estable para ver si reconoce los disco? No, no lo probé todavía, mañana lo hago y te aviso como me fue. Gracias por la respuesta. Saludos. Mauro Sánchez. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yw9ldisl+glqbcdxkmbwdz4krb+ohmb-z+2e0usl+2...@mail.gmail.com
Re: Software web (simil webmin) para reiniciar servicio
2011/12/26 Carlos Miranda Molina (Mstaaravin) mstaara...@gmail.com: 2011/12/26 jmramirez (mas_ke_na) mas_ke...@hotmail.com: He visto esto otro, pero supongo que si has descartado el uso de la shell, este no te gustara. http://ubuntulife.wordpress.com/2010/08/03/sencillo-script-en-bash-para-ejecutar-un-comando-remoto-mediante-ssh/ Gracias por responder... shell está descartado, accederían desde windows y no quiero complicarla con putty y demás. Tiene que ser web para que entren (autenticados SSL) y puedan con algún botón stop|start|restart hacer lo que necesitan. La verdad no parece muy complicado de implementar con un simple cgi. -- Marc -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ca+dcn_vpaq03ofqckqefwmgoaemvwyh7yro7_z3bkwu6ird...@mail.gmail.com
Re: Instalar IBM x3550 M3 en Debian Squeeze
Hola a tod@s El día 26 de diciembre de 2011 08:22, Mauro Sánchez maur...@gmail.com escribió: Hola a todos. Estoy intentando instalar Squeeze en un Servidor Debian con una placa de RAID 9240-4i. Hace poco tuve un problema que no me detectaba los discos durante la instalación pero era por una mala configuración del RAID en la BIOS. Ahora ya los detecta, pero cuando creo las particiones y comienza a intentar formatearlas me da el siguiente error: nmi received for unknown reason 3d on cpu 0 Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Probé realizar la instalación de Debian Testing y funciona correctamente, pero el problema que yo necesito utilizar Debian Stable. Yo creo que es un problema con el kernel. ¿Qué alternativas puedo llegar a realizar? ¿Puedo instalar Squeeze pero con el kernel 3.0? O sea, ¿viene alguna imagen armada ya con ese kernel? La otra idea que se me ocurre es instalar Testing y después realizar un downgrade a Stable. Ya lo probé, pero tengo problemas con algunos paquetes como por ejemplo grub. ¿Alguien tiene alguna otra idea mejor? Yo instale es ese mismo servidor con una configuración diferente de HDD (SATA 250 GB) utilizando Debian 6.0 (squeeze-amd64-firmware), ¿qué versión de la distro estas utilizando Mauro? creo que ese puede ser uno de los problemas igual falta algún controlador privativo y por eso anda fallando la instalación. Muchas gracias. Saludos. Mauro Sánchez. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camcf3yzr3p2tpnporexlfkaduozd+cblokem3rvoge3z1h+...@mail.gmail.com -- Atte: Mario Rivas Medrano Laboratorio de Origen de la Vida Departamento de Biología Evolutiva Facultad de Ciencias, UNAM Telefono: 55-56224823 Celular: 55-23083095 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cae+sjbcxjatch3mo63t-omjyi_6+yfhqfs4e+yqrygzqz4d...@mail.gmail.com
Re: ¡¡¡ Felicidades !!!
Linuxeros: Felicidades a todos y que la pasen muy bien. Rantiscares -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cal0xakbsscq_dkbkyearx47mjwkxqa-iaf_hbmgaeepeuct...@mail.gmail.com
Re: SSH mediante no-ip [SOLUCIONADO]
LISTEROS: Agradezco su atencion, gracias a sus post, he mirado el error que tenia. Lo solucione entrando a la configuracion de mi router, y abri el puerto 1320 del mismo para que escuchara las peticiones desde fuera de la red. Ahora si me puedo conectar desde culaquier parte de la siguiente manera. ssh -p 1320 usua...@burrito.zapto.org Gracias Rantiscares -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cal0xakbszfjqnh_jg4_tnkw9_6exnoc_0enfkhmer0wk2pd...@mail.gmail.com
Re: Sobre grup
El 20/12/2011 09:12 a.m., Ismael L. Donis Garcia escribió: - Original Message - From: Luis este...@princesa.pri.sld.cu To: debian-user-spanish@lists.debian.org Sent: Tuesday, December 20, 2011 9:48 AM Subject: Re: Sobre grup Hola, Ahora va en serio. La SuperNOVA Linux, durante el proceso de instalación, no pide contraseñas para root; solo pide contraseñas para otro usuario que podemos crear definiendo su login y password, al cual le asigna derechos administrativos. Mi pregunta es: cómo saber el password de root?. Y sin embargo, al parecer crea la cuenta de root pues hay una entrada para él en /etc/pssword. Qué me dicen, no está graciosa la estrellita? Parece que aquí dejaron un huequito para poder sentarse a tu PC y administrarla, ya que ellos deben conocer la contraseña que le ponen al root por defecto. No crees? Eso sin pensar que de seguro dejaron otros huequitos para mirar. jajaja Saludos, Luis Saludos = || ISMAEL || = Ya el tema tiene unos días, pero defendiendo un poco a los UCI (que Dios me lo tenga en cuenta, o me lo perdone, jejeje), si mal no recuerdo de una época antigua en la que jugué con Ubuntu (muy mu lejana), Ubuntu no te pide password para root porque el primer usuario que creas tiene por defecto el poder del sudo (utiliza la fuerza Luke), al parecer nuestros queridos amigos cuando clonaron a la bestia lo dejaron así, yo prefiero decir que root es root (Unix´s God) hasta que se demuestre lo contrario, No tendrás otros dioses aparte de root ;) pero para gustos colores. Así que no es para tanto, aunque Nova tenga la santa bendición del Ministerio del Interior no nos dejemos llevar por las teorías de la conspiración. En cuanto a la gasolina, jejeje, ya yo me acostumbré a andar con un extintor a cuestas, por si acaso. Bueno, les dejo que me toca rendir cuentas ante el Gran Hermano por tener instalado Debian y no Nova ;) S@lu2 wzaldivar -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas Infomed: http://www.sld.cu/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef9582a.1090...@infomed.sld.cu
Re: Problemas de reproducción con Exaile
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
YaSnIeL LóPeZ ArGüEz escribió:
El 26/12/11 14:31, Esteban Torres Rodríguez escribió:
El día 26 de diciembre de 2011 20:08, YaSnIeL LóPeZ ArGüEz
yasn...@servi.cupet.cu escribió:
Hola colegas,
Siempre he usado Exaile como reproductor de sonido, que lo he tratado de
instalar en Squeeze, Mint, Ubuntu, Slackware y en las 4 distros me da el
mismo error, cuando reproduce se queda congelado, a tal punto que
tengo que
darle un killall por consola porque no deja de reproducir la múisica
pero
bloqueado, he revisado varias listas, Internet y no se cuantos lados
y no
aparece ningún reporte de Bug, ni siquiera información sobre el tema, a
alguien le ocurre lo mismo... Me gustaría dar mas datos sobre el
error pero
es que no sale nada, simplemente se bloquea, sin error alguno.
Alguien me
puede decir si le sucede lo mismo?
saludos y graxias de antemano
--
Lic. Yasniel López Argüez.
Administrador de Red.
Empresa Servicentros de Cupet.
Oficina Central, Avenida 70, No.29, esq. 29b. Buena Vista.
Municipio Playa, La Habana. Cuba.
Teléfono: 204-0185 Fax: 204-0433
Teléfono: 204-0405 Ext.121
--
To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
listmas...@lists.debian.org
Archive: http://lists.debian.org/4ef8c635.4090...@servi.cupet.cu
Por que no pruebas a lanzarlo desde consola? Sin saber que error te
muestra es complicado que se te pueda ayudar.
Esa fue mi primera opción, el problema es ese, que no me ningún problema
y como dije he buscado y rebuscado... y no existe reporte de bugs ni
nada parecido... por si acaso acá pongo lo que me dice cuando lo corro
por consola.
yasniel@isabella ~ $ exaile
INFO: Loading Exaile 0.3.2.1...
INFO: Loading settings...
INFO: Loading plugins...
INFO: Loading collection...
INFO: Loading devices...
INFO: Loading interface...
INFO: Loading main window...
INFO: Connecting main window events...
INFO: Loading panels...
INFO: Connecting panel events...
INFO: Done loading main window...
INFO: Exaile is shutting down...
INFO: Disabling plugins...
INFO: Saving state...
Como puedes ver todo normal...
Buenas.
Lanzalo en modo debug:
jmramirez@jmramirez:~$ exaile --v
/usr/lib/exaile/xl/library.py:17: DeprecationWarning: the md5 module is
deprecated; use hashlib instead
import md5, os, random, re, threading, time, traceback, gc, sys
Exaile 0.2.14
/usr/lib/exaile/xl/gui/tray.py:177: DeprecationWarning: Use the new
widget gtk.Tooltip
self.tips = gtk.Tooltips()
/usr/lib/exaile/xl/gui/tray.py:222: DeprecationWarning: Use the new
widget gtk.Tooltip
self.tips.set_tip(self.icon, tip)
Plugins 'Accesos Rápidos Globales' version '0.6.2' loaded successfully
Plugins '¡Streamripper!' version '0.1.4' loaded successfully
Plugins 'Lista de paneles' version '0.1.3' loaded successfully
Plugins 'Current song' version '0.1' loaded successfully
Plugins 'Enviar por Bluetooth' version '0.2.1' loaded successfully
Plugins 'Accesos Rápidos' version '0.1.6' loaded successfully
Plugins 'Consola Python' version '0.1.2' loaded successfully
Plugins 'MTP Device Manager' version '0.4.0' loaded successfully
Plugins 'Reanudar la Reproducción' version '0.2.3' loaded successfully
Plugins 'Complemento LibNotify' version '0.1.6' loaded successfully
Plugins 'Modo Mini' version '0.4.9' loaded successfully
Plugins 'Estado de la MI' version '0.12.1' loaded successfully
Plugins 'Alarma' version '0.2' loaded successfully
Plugins 'No mostrar en la Barra de Tareas' version '0.1.2' loaded
successfully
Plugins 'Add Directory' version '0.1' loaded successfully
Plugins 'Controlador de Almacenamiento Masivo' version '0.3.4' loaded
successfully
Plugins 'Controlador de dispositivo iPod' version '0.4.6' loaded
successfully
Plugins 'Carátulas en el Escritorio' version '0.3.3' loaded successfully
Activated gnome mmkeys for gnome 2.22.x
Using multimedia keys from: gnome
Plugins 'Botones de Bandeja' version '0.7.3' loaded successfully
Plugins 'Avant Window Navigator' version '0.7.4' loaded successfully
Plugins 'Radio Shoutcast' version '0.4.7' loaded successfully
Created db for thread Thread-1
{'Thread-1': sqlite3.Connection object at 0xaeeac20}
loading tracks...
/usr/lib/exaile/xl/media/__init__.py:61: DeprecationWarning:
object.__init__() takes no parameters
long.__init__(self, num)
Closed db for thread Thread-1
done loading tracks...
loading songs
Clearing tracks cache
Importing /home/jmramirez/.exaile/saved/playlist.m3u
/usr/lib/exaile/xl/xlmisc.py:462: DeprecationWarning: Use the new widget
gtk.Tooltip
self.tips = gtk.Tooltips()
/usr/lib/exaile/xl/xlmisc.py:476: DeprecationWarning: Use the new widget
gtk.Tooltip
self.tips.set_tip(btn, _(Close this tab))
Last playlist loaded
Loading page 0
salu2
Menos mal que no lo uso XD, me quede en el audacious hace años
Un saludo
- --
Si los tontos
Re: Software web (simil webmin) para reiniciar servicio
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Carlos Miranda Molina (Mstaaravin) escribió: 2011/12/26 jmramirez (mas_ke_na) mas_ke...@hotmail.com: He visto esto otro, pero supongo que si has descartado el uso de la shell, este no te gustara. http://ubuntulife.wordpress.com/2010/08/03/sencillo-script-en-bash-para-ejecutar-un-comando-remoto-mediante-ssh/ Gracias por responder... shell está descartado, accederían desde windows y no quiero complicarla con putty y demás. Tiene que ser web para que entren (autenticados SSL) y puedan con algún botón stop|start|restart hacer lo que necesitan. Otros usuarios que tienen que hacer lo mismo y ya tienen shell lo hacen a través de sudo con: sudo ALL=(ALL) NOPASSWD: /etc/init.d/catalina.sh Buenas Hoy si que di con lo que decía, creo que por aquí puedes hacer algo que no sea muy complicado, creas un .bat con la secuencia de arranque/para/reinicio del servicio y listo, al fin y al cabo es un telnet. http://www.taringa.net/posts/info/786901/Port-Knocking---Oculta-puertos-_linux_.html Para la web, supongo que puede armarte algo como lo de esta web: http://www.taringa.net/posts/linux/2428505/Ejecutar-comandos-shell-mediante-php.html Pero sin dejar que pongan lo que quieran, vamos que te creas la web, pones dos botoncitos o 3 si quieres el reinicio y la proteges con usuario y password. http://www.taringa.net/posts/linux/2428505/Ejecutar-comandos-shell-mediante-php.html Saludos PD: No me mola taringa, pero hoy encontré todo allí XD Saludetes - -- Si los tontos volaran, el cielo se oscurecería No me envié correos en formatos propietarios http://www.gnu.org/philosophy/no-word-attachments.es.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJO+XnGAAoJEOWNzQnqy+fzuWcH/iGbNolsDPhoEf34RGoxfeG2 72dPS1gnFopFi5J4vwq700Wo1vIrK5JCDRv2dR2iEZHO3BH3w+rwYGxQ+JRda1Ee 9dRIT4ipPTSc3rU83CoT0kv4J/uorKyUdGCCVMrrelno6rc8SNvOXPUY6SmSsSRb xSB1DEKMUvcVrKCWfM8TflPd2vZ42W2uK2Xb9GdvppRdu48JLd0YEFdnUzRRJTt0 J9c7ts9MSzAd7o/hJPRhnD6QBiqiTojSWza5i33Mq/v6at9v9lU5erws5xpcTOH8 6UWSeZJwuw8QNJg6OpMqk0k4N6xhyDFtElxex0xNz/UX4uIzn8HmMRJ3ooV29Lg= =hea5 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0-smtp1497ad5bb345dcf0b85091eb1...@phx.gbl
Re: Sistema de ficheros clustering
El 26/12/11 20:39, Esteban Torres Rodríguez escribió: Buenas a tod@s. Cada vez que he tenido que compartir discos entre las máquinas, siempre me he decantado por NFS, con su pros y sus contras, pero ahora necesito montar un cluster de servidores de mapas y dichos servidores van a compartir un espacio de unos 600 Gb donde estará repleto de imágenes. Ante este reto me ha parecido que NFS puede ser un poco arriesgado por aquello de que ambos servidores deberán poder escribir y leer al mismo espacio y que necesito alto rendimiento y fiabilidad. Entonces me estoy planteando algún sistema de ficheros para clustering (ejem: GFS2). Que me recomendais? Saludos. Hola, No tienes muchas mas opciones, gfs2 u ocfs2. He usado los dos y no he visto ninguna diferencia significativa en el rendimiento, aunque tampoco ha sido en sistemas con una carga demasiado grande. En la actualidad si mantengo un cluster de imap con OCFS2 y aunque no son muchas cuentas, 30 o 40, la respuesta es buena y sobre todo la robustez, quiero decir, tras varias caidas de los nodos el sistema de archivos no ha tenido problemas de corrupción. Por último los dos son igual de fácil de configurar. Un saludo. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef97a16.2010...@limbo.ari.es
Gnash version ?
God fortsättning! Jag blir inte riktigt klok på det här. När jag läser på Insticksmoduler under tillågg i IceWeasel, så står det att Gnash är kompatibel med Shockwave Flash 10.1 r999. Men om jag kollar browser-plugin-gnash, så står det: GNU Gnash is based on GameSWF and supports most SWF v7 features and some SWF v8 and v9. SWF v10 is not supported by GNU Gnash. Vilket är det som gäller egentligen ? -- /Rolf -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cadt_qguk0+-u0wscaxgmuar1vkxzp6fdcxktsxvasqnsvr3...@mail.gmail.com
Ativar o ip_forward
Olá pessoal! Como eu ativo o redirecionamento no debian? Eu alterei o arquivo /proc/sys/net/ipv4/ip_forward tanto por um editor quanto pelo sysctl depois de um tempo seu valor muda automaticamente de 1 para 0? Obs.: Estou usando o Mint Debian Edition, que usa o Debian Whezzy Desde já agradeço suas respostas.
Re: Ativar o ip_forward
Bom dia . Edite o etc/sysctrl.conf # Uncomment the next line to enable packet forwarding for IPv4 net.ipv4.ip_forward=1 Fábio Rabelo Em 26 de dezembro de 2011 07:09, Cleriston Martinelo cleris...@gmail.comescreveu: Olá pessoal! Como eu ativo o redirecionamento no debian? Eu alterei o arquivo /proc/sys/net/ipv4/ip_forward tanto por um editor quanto pelo sysctl depois de um tempo seu valor muda automaticamente de 1 para 0? Obs.: Estou usando o Mint Debian Edition, que usa o Debian Whezzy Desde já agradeço suas respostas.
Re: Ativar o ip_forward
On 26-12-2011 07:09, Cleriston Martinelo wrote: Olá pessoal! Como eu ativo o redirecionamento no debian? Eu alterei o arquivo /proc/sys/net/ipv4/ip_forward tanto por um editor quanto pelo sysctl depois de um tempo seu valor muda automaticamente de 1 para 0? Obs.: Estou usando o Mint Debian Edition, que usa o Debian Whezzy Desde já agradeço suas respostas. O antigo pergaminho do grande sábio MAN diz o seguinte sobre sysctl : sysctl -w net.ipv4.ip_forward=1 -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef85553.40...@gmail.com
Re: Ativar o ip_forward
Olá pessoal. Eu tinha feito essas opções. Eu descobri que o KVM que está alterando esta opção. Quando o KVM/libvirt está parado ele altera para 0 novamente. Alguém sabe como desativo isso no libvirt? 2011/12/26 Fábio Rabelo fa...@fabiorabelo.wiki.br Bom dia . Edite o etc/sysctrl.conf # Uncomment the next line to enable packet forwarding for IPv4 net.ipv4.ip_forward=1 Fábio Rabelo Em 26 de dezembro de 2011 07:09, Cleriston Martinelo cleris...@gmail.comescreveu: Olá pessoal! Como eu ativo o redirecionamento no debian? Eu alterei o arquivo /proc/sys/net/ipv4/ip_forward tanto por um editor quanto pelo sysctl depois de um tempo seu valor muda automaticamente de 1 para 0? Obs.: Estou usando o Mint Debian Edition, que usa o Debian Whezzy Desde já agradeço suas respostas.
Re: How to apply grsec patch to debian kernel
On Mon, 2011-12-26 at 06:23 +0330, a dehqan wrote: [snip] Have told debian kernel , not upstream kernel , so my kernel source is in /usr/src , do you mean they are the same in applying patch way ? On Mon, Dec 26, 2011 at 12:09 AM, Ralf Madorf [snip] http://www.crucialp.com/resources/tutorials/server-administration/linux-kernel-2.6-compilation-compile-with-grsecurity-grsec-2.6.5-2.6.7-2.6.8-2.6.8.1-2.6.9-2.6.10-2.6.11.6-tutorial-how-to.php The howto missed to cd into the kernel source directory. cd /path/to/wherever/the/kernel/source/is patch -p0 /path/to/the/patch/grsecurity-VERSION.patch A side note [1] Than you can run ... make oldconfig make-kpkg clean make-kpkg --rootcmd fakeroot --initrd kernel-image kernel-headers ... or anything else. The way you build the kernel is independent of building the patch. - Ralf [1] I'm not using this patch, hence I don't know it, but I'm using other patches. Btw. I'm even not using Debian. If needed try -p1 instead of -p0. -pnum or --strip=num Strip the smallest prefix containing num leading slashes from each file name found in the patch file. A sequence of one or more adjacent slashes is counted as a single slash. This controls how file names found in the patch file are treated, in case you keep your files in a different directory than the person who sent out the patch. For example, supposing the file name in the patch file was /u/howard/src/blurfl/blurfl.c setting -p0 gives the entire file name unmodified, -p1 gives u/howard/src/blurfl/blurfl.c without the leading slash, -p4 gives blurfl/blurfl.c and not specifying -p at all just gives you blurfl.c. Whatever you end up with is looked for either in the current directory, or the directory specified by the -d option. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1324885178.1242.15.camel@localhost.localdomain
Re: How to apply grsec patch to debian kernel
On Mon, 2011-12-26 at 08:39 +0100, Ralf Madorf wrote: On Mon, 2011-12-26 at 06:23 +0330, a dehqan wrote: [snip] Have told debian kernel , not upstream kernel , so my kernel source is in /usr/src , do you mean they are the same in applying patch way ? On Mon, Dec 26, 2011 at 12:09 AM, Ralf Madorf [snip] http://www.crucialp.com/resources/tutorials/server-administration/linux-kernel-2.6-compilation-compile-with-grsecurity-grsec-2.6.5-2.6.7-2.6.8-2.6.8.1-2.6.9-2.6.10-2.6.11.6-tutorial-how-to.php The howto missed to cd into the kernel source directory. cd /path/to/wherever/the/kernel/source/is patch -p0 /path/to/the/patch/grsecurity-VERSION.patch A side note [1] Than you can run ... make oldconfig make-kpkg clean make-kpkg --rootcmd fakeroot --initrd kernel-image kernel-headers ... or anything else. The way you build the kernel is independent of building the patch. *chuckle* adding the patch - Ralf [1] I'm not using this patch, hence I don't know it, but I'm using other patches. Btw. I'm even not using Debian. If needed try -p1 instead of -p0. -pnum or --strip=num Strip the smallest prefix containing num leading slashes from each file name found in the patch file. A sequence of one or more adjacent slashes is counted as a single slash. This controls how file names found in the patch file are treated, in case you keep your files in a different directory than the person who sent out the patch. For example, supposing the file name in the patch file was /u/howard/src/blurfl/blurfl.c setting -p0 gives the entire file name unmodified, -p1 gives u/howard/src/blurfl/blurfl.c without the leading slash, -p4 gives blurfl/blurfl.c and not specifying -p at all just gives you blurfl.c. Whatever you end up with is looked for either in the current directory, or the directory specified by the -d option. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1324885330.1242.17.camel@localhost.localdomain
Re: displaying Japanese in the virtual consoles/terminals in squeeze
Ouch. [...] For example, Debian console installer runs on virtual console with japanese display or any fancy characters. This is because they run special terminal program. Should be the same set of issues, except for the specific parameters, for any large-character-set language. jfbterm fbterm-ucimf fbterm bogl-bterm apt-get show fbterm tells me fbterm is installed, but I don't see any .fbtermrc files in the user directories when I login to the virtual consoles. user@deb:~$ dmesg ... [ 38.475382] [drm] Initialized via 2.11.1 20070202 for :01:00.0 on minor 0 [ 38.584875] agpgart-via :00:00.0: AGP 3.5 bridge [ 38.584902] agpgart-via :00:00.0: bridge is in legacy mode, falling back to 2.x [ 38.584910] agpgart-via :00:00.0: putting AGP V2 device into 4x mode [ 38.584965] pci :01:00.0: putting AGP V2 device into 4x mode [ 2380.669109] fbterm[2816]: segfault at 18 ip 08050653 sp bfefa670 error 4 in fbterm[8048000+13000] [ 4485.968858] mtrr: no MTRR for e800,400 found [ 4486.381984] agpgart-via :00:00.0: AGP 3.5 bridge [ 4486.382012] agpgart-via :00:00.0: bridge is in legacy mode, falling back to 2.x [ 4486.382019] agpgart-via :00:00.0: putting AGP V2 device into 4x mode [ 4486.382075] pci :01:00.0: putting AGP V2 device into 4x mode ... Possibly relevant lines: - ... [0.00] NR_IRQS:1280 [0.00] Console: colour VGA+ 80x25 [0.00] console [tty0] enabled [0.00] Fast TSC calibration using PIT [0.00] Detected 1833.246 MHz processor. ... [0.082677] CPU0: AMD Sempron(tm) 2600+ stepping 01 [0.084001] Brought up 1 CPUs [0.084001] Total of 1 processors activated (3666.49 BogoMIPS). [0.084001] CPU0 attaching NULL sched-domain. [0.084001] devtmpfs: initialized [0.084001] regulator: core version 0.5 [0.084001] NET: Registered protocol family 16 ... [0.142147] vgaarb: device added: PCI::01:00.0,decodes=io+mem,owns=io+mem,locks=none [0.142151] vgaarb: loaded ... [0.879403] Linux agpgart interface v0.103 [0.879550] agpgart: Detected VIA KM400/KM400A chipset [0.887935] agpgart-via :00:00.0: AGP aperture is 128M @ 0xe000 ... - Checking in /dev , I do not have any /dev/fb-whatever device. Should that have been built by the installer when I installed squeeze? So: - user@deb:~$ echo $LANG ja_JP.UTF-8 - And, - user@deb:~$ ls /lib/modules/`uname -r`/kernel/drivers/video arcfb.ko console geodemacmodes.ko neofb.ko s1d13xxxfb.ko sstfb.kotdfxfb.ko vga16fb.ko arkfb.ko cyber2000fb.ko hecubafb.ko matrox nvidia s3fb.kosvgalib.ko tridentfb.ko vgastate.ko aty display hgafb.ko mb862xx output.ko savage syscopyarea.ko uvesafb.kovia backlightfb_ddc.ko i810 metronomefb.ko pm2fb.ko sissysfillrect.ko vermilion vt8623fb.ko cirrusfb.ko fb_sys_fops.ko kyro n411.ko pm3fb.ko sm501fb.ko sysimgblt.kovfb.ko user@deb:~$ ls -la /lib/modules/`uname -r`/kernel/drivers/video/via 合計 112 drwxr-xr-x 2 root root 4096 2011-11-29 21:04 . drwxr-xr-x 16 root root 4096 2011-11-29 21:04 .. -rw-r--r-- 1 root root 98560 2011-11-03 18:17 viafb.ko user@deb:~$ ls -l /lib/modules/`uname -r`/kernel/drivers/video/display 合計 8 -rw-r--r-- 1 root root 7496 2011-11-03 18:17 display.ko user@deb:~$ ls -l /lib/modules/`uname -r`/kernel/drivers/video/console 合計 12 -rw-r--r-- 1 root root 8900 2011-11-03 18:17 mdacon.ko - And, - user@deb:~$ cat /etc/default/console-setup # Change to yes and setupcon will explain what is being doing VERBOSE_OUTPUT=no # Setup these consoles. Most people do not need to change this. ACTIVE_CONSOLES=/dev/tty[1-6] # Put here your encoding. Valid charmaps are: UTF-8 ARMSCII-8 CP1251 # CP1255 CP1256 GEORGIAN-ACADEMY GEORGIAN-PS IBM1133 ISIRI-3342 # ISO-8859-1 ISO-8859-2 ISO-8859-3 ISO-8859-4 ISO-8859-5 ISO-8859-6 # ISO-8859-7 ISO-8859-8 ISO-8859-9 ISO-8859-10 ISO-8859-11 ISO-8859-13 # ISO-8859-14 ISO-8859-15 ISO-8859-16 KOI8-R KOI8-U TIS-620 VISCII CHARMAP=UTF-8 # The codeset determines which symbols are supported by the font. # Valid codesets are: Arabic Armenian CyrAsia CyrKoi CyrSlav Ethiopian # Georgian Greek Hebrew Lao Lat15 Lat2 Lat38 Lat7 Thai Uni1 Uni2 Uni3 # Vietnamese. Read README.fonts for explanation. CODESET=Uni2 # Valid font faces are: VGA (sizes 8, 14 and 16), Terminus (sizes # 12x6, 14, 16, 20x10, 24x12, 28x14 and 32x16), TerminusBold (sizes # 14, 16, 20x10, 24x12, 28x14 and 32x16), TerminusBoldVGA (sizes 14 # and 16) and Fixed (sizes 13, 14, 15, 16 and
Re: Getting runparts if-up.d, etc to execute
On Monday 30 Kislev 5772 04:18:08 debian-user-digest-requ...@lists.debian.org wrote: Re: Getting runparts if-up.d, etc to execute From: Brian a...@cityscape.co.uk To: debian-user@lists.debian.org On Sun 25 Dec 2011 at 21:58:18 +0200, David Baron wrote: Somehow, the scripts in the if-up.d, if-down.d directories are net being executed. I have a farely standard interfaces for a router. What am I missing? How do you know this? One of the scripts has echo text in it, did not see this. What is the output of 'ifup -v eth2'?~$ $ sudo ifup -v eth2 Configuring interface eth2=eth2 (inet) run-parts --verbose /etc/network/if-pre-up.d run-parts: executing /etc/network/if-pre-up.d/bridge run-parts: executing /etc/network/if-pre-up.d/ethtool run-parts: executing /etc/network/if-pre-up.d/linux-wlan-ng_pre-up run-parts: executing /etc/network/if-pre-up.d/uml-utilities run-parts: executing /etc/network/if-pre-up.d/vde2 run-parts: executing /etc/network/if-pre-up.d/wireless-tools run-parts: executing /etc/network/if-pre-up.d/wpasupplicant ifconfig eth2 10.100.101.101 netmask 255.255.255.0 broadcast 10.100.101.255 up route add default gw 10.100.101.1 eth2 SIOCADDRT: File exists Failed to bring up eth2. It IS up! Where is this file--simply get rid of it? sudo ifdown eth2 said: ifdown: interface eth2 not configured Rerunning ifup, no change. It IS up! I had seen that error message with problems with the older mouse drivers. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201112261014.47650.d_ba...@012.net.il
Re: Getting runparts if-up.d, etc to execute
On 26/12/11 18:37, David Baron wrote: On Sunday 29 Kislev 5772 21:58:18 David Baron wrote: Somehow, the scripts in the if-up.d, if-down.d directories are net being executed. I have a farely standard interfaces for a router. What am I missing? # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # The loopback interface # automatically added when upgrading iface lo inet loopback iface eth2 inet static address 10.100.101.101 netmask 255.255.255.0 network 10.100.101.0 broadcast 10.100.101.255 gateway 10.100.101.1 Actually, whole business seems broken. The above file is not really used anywhere, it seems. NO eth2 at all. I have to rerun netcardconfig to get this back every startup, last couple of days. After doing that and restarting tinyproxy, dovecot, etc., things work. Otherwize, network unreachable. If I simply run network-manager restart, I get incorrect paramters. Perhaps because by default Network Manager does *not* manage /etc/network/interfaces Pick one - Network Manager OR /etc/network/interfaces (automated or manual). Cheers -- Iceweasel/Firefox extensions for finding answers to Debian questions:- https://addons.mozilla.org/en-US/firefox/collections/Scott_Ferguson/debian/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef8331f.8070...@gmail.com
Re: Getting runparts if-up.d, etc to execute
David Baron wrote: Actually, whole business seems broken. The above file is not really used anywhere, it seems. NO eth2 at all. Do you get a network device? If so what is the name? I gather from your messages that it isn't called eth2. Note that /etc/udev/rules.d/70-persistent-net.rules keeps a cache of your network devices. If you have changed network devices then this will cause the name to be a different name from the previous network interface device. It will cache the ethernet address in that file and map it to a unique device name. If you delete that file and reboot then a new file will be created at boot time with the current devices listed in it. I have to rerun netcardconfig to get this back every startup, last couple of I have never used that utility. Are you sure you need it? Are you sure it isn't simply confusing things? days. After doing that and restarting tinyproxy, dovecot, etc., things work. Otherwize, network unreachable. Is it setting up a dynamic address using dhcp? If so then it would be better to simply set up a dhcp address in /etc/network/interfaces. Here is a standard tempate. auto eth0 allow-hotplug eth0 iface eth0 inet dhcp If I simply run network-manager restart, I get incorrect paramters. Use of NetworkManager is a controversial topic. It is discussed and flamed very often on this mailing list. Search the archives for an education of it. There are strong feelings on all sides. Personally I think it was ill conceived and I always remove it. Bob signature.asc Description: Digital signature
Re: Frequent disk full crashes with KDE Nepomuk
The 6% use of / still appears to be stable, with the complete directory # /home/username/.kde/share/apps/nepomuk/repository/main/data/virtuosobackend now owned by root, so username is unable to write to it. -- Chris Bell www.chrisbell.org.uk Microsoft sells you Windows ... Linux gives you the whole house. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/marcel-1.53-1226082833-313h...@riscpc.main
Re: How to apply grsec patch to debian kernel
On Mon, 2011-12-26 at 08:42 +0100, Ralf Madorf wrote: On Mon, 2011-12-26 at 08:39 +0100, Ralf Madorf wrote: On Mon, 2011-12-26 at 06:23 +0330, a dehqan wrote: [snip] Have told debian kernel , not upstream kernel , so my kernel source is in /usr/src , do you mean they are the same in applying patch way ? On Mon, Dec 26, 2011 at 12:09 AM, Ralf Madorf [snip] http://www.crucialp.com/resources/tutorials/server-administration/linux-kernel-2.6-compilation-compile-with-grsecurity-grsec-2.6.5-2.6.7-2.6.8-2.6.8.1-2.6.9-2.6.10-2.6.11.6-tutorial-how-to.php The howto missed to cd into the kernel source directory. cd /path/to/wherever/the/kernel/source/is patch -p0 /path/to/the/patch/grsecurity-VERSION.patch A side note [1] Than you can run ... make oldconfig make-kpkg clean make-kpkg --rootcmd fakeroot --initrd kernel-image kernel-headers ... or anything else. The way you build the kernel is independent of building the patch. *chuckle* adding the patch - Ralf [1] I'm not using this patch, hence I don't know it, but I'm using other patches. Btw. I'm even not using Debian. If needed try -p1 instead of -p0. -pnum or --strip=num Strip the smallest prefix containing num leading slashes from each file name found in the patch file. A sequence of one or more adjacent slashes is counted as a single slash. This controls how file names found in the patch file are treated, in case you keep your files in a different directory than the person who sent out the patch. For example, supposing the file name in the patch file was /u/howard/src/blurfl/blurfl.c setting -p0 gives the entire file name unmodified, -p1 gives u/howard/src/blurfl/blurfl.c without the leading slash, -p4 gives blurfl/blurfl.c and not specifying -p at all just gives you blurfl.c. Whatever you end up with is looked for either in the current directory, or the directory specified by the -d option. Since my description is a little bit confusing, please post the output of cat grsecurity-VERSION.patch and [snip] everything but the path to one of the headers that should be patched. I assume that you have got /usr/src/linux-VERSION, right? Usually you should be inside the linux-VERSION directory and use the -p1 option. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1324889035.1242.24.camel@localhost.localdomain
Re: Getting runparts if-up.d, etc to execute
On Monday 30 Kislev 5772 04:18:08 debian-user-digest-requ...@lists.debian.org wrote: Somehow, the scripts in the if-up.d, if-down.d directories are net being executed. Very unexpected. I have a farely standard interfaces for a router. What am I missing? # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # The loopback interface # automatically added when upgrading iface lo inet loopback In addition to the above there should be a line for the loopback driver like this one: auto lo They usually appear like this: auto lo iface lo inet loopback iface eth2 inet static address 10.100.101.101 netmask 255.255.255.0 network 10.100.101.0 broadcast 10.100.101.255 gateway 10.100.101.1 You have a very common but undesired inclusion of both netmask and broadcast and network. This is due to the documentation including all as an example and then many people followed the example. This has gotten cleaned up most places but the cleanup is continuing. The program can calculate the broadcast and network from the netmask. The netmask is the most desirable source for all of the rest and it would be very unusual to need to include all three. It is much more desired to list only netmask in the file and let the program calculate the rest because it eliminates a source of human data entry error. Then at the minimum you want 'allow-hotplug eth2' on the interface too. Additionally 'auto eth2' is also useful for old timers such as myself that want to have the network cycle when running 'service networking restart'. auto eth2 allow-hotplug eth2 iface eth2 inet static address 10.100.101.101 netmask 255.255.255.0 gateway 10.100.101.1 I think that the missing 'allow-hotplug eth2' line might be your problem with scripts. Because it was probably more than simply scripts that was not being configured. The above is documented here: http://www.debian.org/doc/manuals/debian-reference/ch05.en.html#_the_basi c_syntax_of_etc_network_interfaces And here: http://wiki.debian.org/NetworkConfiguration OK! This and a reboot (with a series of iptables temporarily unavailable messages) got it working and I saw the text that expected to see. The network was working correctly on startup. BTW, the netcardconfig utility asks for and places all three lines, not just the netmask, and also removes/omits the other, auto and allow lines. So replacing this very very old utility is part of the cleanup. The scripts are run fine. I still cannot get my imap server from outside (formerly corrected by (re-)running the rc.firewall script (from guarddog) but that may be another problem. I do have port 143 forwarded in the router. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201112261046.49864.d_ba...@012.net.il
Re: No sound on AC'97 Audio Controller
On Mon, 26 Dec 2011 00:00:57 -0500 Kyle Schwarz kyle.r.schw...@gmail.com wrote: On 12/25/2011 09:51 AM, Rob Owens wrote: On Sun, Dec 25, 2011 at 09:22:20AM +0100, Ralf Madorf wrote: On Sun, 2011-12-25 at 09:11 +0100, Ralf Madorf wrote: [off] Is there a mute option? Perhaps you need to un-mute the channels? The faders might be at 100%, anyway the channels can be muted. I'm using professional sound cards, that need special mixers, so I don't know what options are for such on-board devices and alsamixer. [off] seems to lead to a mute option?! To unmute: run alsamixer, go to the channel you want (master, etc) and hit m. pulseaudio is gone, all channels are turned up and not muted. Another thought I had: do you have an /etc/asound.conf or ~/.asoundrc ? I have no /etc/asound.conf or ~/.asoundrc I still have no sound, any other ideas? Thanks for the continued help. Best regards Kyle Schwarz Here's a real long shot Kyle, Winblows allows the switching between headphone and speakers. Have a look in the bios settings on default audio somewhere. Some allow switching of headphone to line out and default to speakers. -- Happy Christmas and a Happy New Year Best wishes / 73 Richard Bown e-mail: rich...@g8jvm.com or richard.b...@blueyonder.co.uk nil carborundum a illegitemis ## Ham Call G8JVM . OS Debian Wheezy/Sid amd64 on a Dual core AMD Athlon 5200, 4 GB RAM Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W ( degs mins ) QRV HF + VHF Microwave 23 cms:140W,13 cms:100W,6 cms:10W 3 cms:5W ## -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20111226091711.62242...@g8jvm.com
Re: Gnome 3 update makes PDFs open in inkscape
On 23/12/11 15:05, Ross Vandegrift wrote: Hello all, I recently pulled in the updates that brought Gnome 3. Now, anytime I try to open a PDF in iceweasel, they are opened with inkscape instead of evince. There's a bug filed on this problem (#613752), but it includes no workaround. gnome-control-center lets me specify preferred applications for only a scant few things, but not PDFs. Setting iceweasel's application/pdf to /usr/bin/evince doesn't help. I would be happy to remove inkscape, but gnome and gnome-desktop-environment depend on it. What is the right way around this? Right click on the file in Nautilus and choose properties. Select the Open With tab Either pick an application from the list and click the Set as Default button, or if its not there you will have to Show Other Applications first and select one from there. If its not in the Show Other Applications it a bit harder because I think you have to set up a desktop file with the right info in. (Take a look at the files in /usr/share/applications - which has the ones which should be installed on your system) -- Alan Chandler http://www.chandlerfamily.org.uk -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef83286.6030...@chandlerfamily.org.uk
Re: OT programming languages/ systems for advanced applications on Linux
* 2011-12-25T12:46:07-08:00 * David Christensen wrote: I'm looking for a language/ system that is general-purpose in scope and supports historical through recent paradigms: procedural, structured, modular, and OO. The applications I want to build include web content management systems and web portals. Other wish-list features include FOSS, rigorous language/ library design and documentation, a comprehensive and easily extended library, support for automated testing, robust interoperability with OS, local resources, and remote services, and deep integration with the FOSS ecosystem. Built-in mini-languages for regular expressions, documentation, formatting/ templating, SQL, etc., are a conundrum; libraries would suit me fine. Agreed. (The language/ system I'm seeking should be capable of implementing application-specific languages.) That's Common Lisp. I think SBCL is the most popular free-software implementation for the language. Emacs+Slime is the most popular development environment. Usenet group comp.lang.lisp is a good place for discussing Common Lisp. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87d3bbbsrt@mithlond.arda
Re: OT: deferring gmail's new look
On Du, 25 dec 11, 11:58:55, Tony Baldwin wrote: Or, you could just get your gmail with mutt over imap. I'm doing this and I have to say it is not the best combo. Sure, you can tweak mutt to do almost everything, but gmail does so many non-standard things that you still can't get it quite right. And gmail's search is superior. I wish mutt would be integrated with sup/notmuch, THAT would be a killer combo ;) Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
clamscan to check dos .exe files
Good time of the day. How do I scan dos .exe files w/ clamscan? Or it is impossible? I have downloaded a windos exe and want to try it w/ wine. But first I want to check it but clamscan seems does not scan it - in its statistics it shows zero data scanned. Thanks for Your time. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef84f34.6551b40a.79e9.8...@mx.google.com
Re: clamscan to check dos .exe files
On 26/12/11 21:40, Sthu Deus wrote: Good time of the day. How do I scan dos .exe files w/ clamscan? Or it is impossible? I have downloaded a windos exe and want to try it w/ wine. But first I want to check it but clamscan seems does not scan it - in its statistics it shows zero data scanned. Thanks for Your time. Have you run the updates? It should just work. eg.:- scott@work:~/.cxoffice/default/drive_c/Program Files/Internet Explorer$ clamscan iexplore.exe iexplore.exe: OK --- SCAN SUMMARY --- Known viruses: 1097623 Engine version: 0.97.3 Scanned directories: 0 Scanned files: 1 Infected files: 0 Data scanned: 0.02 MB Data read: 0.02 MB (ratio 1.00:1) Time: 10.355 sec (0 m 10 s) Cheers -- Iceweasel/Firefox extensions for finding answers to Debian questions:- https://addons.mozilla.org/en-US/firefox/collections/Scott_Ferguson/debian/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef853b1.7080...@gmail.com
Re: Dell Latitude E6410 - Upgrading to Backports Kernel
On Mon, Dec 26, 2011 at 12:20:36PM +1000, Ashton Fagg wrote: Hi all, I have a Dell Latitude E6410 with nVidia graphics, and I would like to upgrade to a backports kernel. I currently run the proprietary nVidia drivers on the stock Squeeze kernel, because they seem to just work. It's my understanding that I will not be able to install these from repositories, as the necessary modules are not offered for backports kernels. I believe there are ways around this I believe that is true. I'd also like to get off the proprietary drivers if I can, however I'm unsure of the Nouveau route. I've generally had success with Nouveau. The exception is a couple of old video chips (one a laptop, the other a desktop). I had to revert to the nv driver, which worked fine in those cases. The other option is rather than going the Squeeze + backports route, should I merely upgrade my entire machine to Wheezy or even Sid? I like the stability that Squeeze offers, but there are a few incompatibilities (lack of touchpad scrolling in particular) which are beginning to annoy me with the stock Squeeze kernel. I run Wheezy on a machine that needed it because of this very issue. It was on a MythTV machine, and I needed the proprietary nVidia driver. Wheezy runs fine, but the constant updates (or should I say temptation of updates) is getting annoying. But I like to set it and forget it more than I like getting the latest and greatest. -Rob -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20111226135916.ga15...@aurora.owens.net
Re: Menu Editor for KDE Launchpad on siduction is missing
Scott Ferguson wrote: On 25/12/11 10:23, Dr Sian Mountbatten wrote: But I would like to use the menu. So what has happened to the menu editor? A. Ask the people who made your product (siduction.org is *not* debian.org) OR B. Right-click on the KMenu Icon (bottom-left of the pane) and see if there's an entry there. C. type kmenuedit at a cli Installed kmenuedit and the Edit Applications ... line appeared on the klauncher. Edited the menu and saved, but when I actioned the menu, my new entry was not there. Still, progress of some kind. -- Dr Sian Mountbatten siduction user -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jd9u02$ano$1...@speranza.aioe.org
port direction definition
I have laptop - router - internet. The router is Westell A90-750015-07. I am using Verizon DSL High Speed Internet. I have set up the apache server on port 8088. It works internally but not externally. So http://192.168.1.21:8088 works. However, I am not able to access the site if I try http://192.168.1.1:8088 or http://72.88.231.219:8088 I tried to set up the port forwarding in the router, but this process is very confusing. Consider these snapshots for example... snapshot1.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZYTcyNzNjNTYtZDY5OC00YTMzLWIxM2YtYTVmMTZkZjk3YmRh snapshot2.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZMzc3NWY1OTItMjYxMi00M2VmLThjMjEtNDRiZTc2ZDM4YTM3 snapshot3.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZM2Y4MzBjNDMtOTM4Yy00NmU4LTliZGEtMjkzMzJlYzk2NDAw In the router configuration (192.168.1.1), I chose Firewall Settings - Port Forwarding and I get snapshot1.jpeg. I then choose Add. This gives snapshot2.jpeg. There is no rule relevant to forwarding of http packets, so I click on create which gives snapshot3.jpeg. In snapshot3.jpeg, the field (1) Enter a name for the custom service: can be any random name. But what about (2)? Should I choose Port Forwarding or Port Triggering. The options in section 3 of snapshot3.jpeg are even more confusing. Under the Protocol, there are three options - tcp, udp, both. I guess I should choose both? For Global PortStart, Global PortEnd should I choose 8088? For Base HostPort, should I choose 8088? What about Direction? In/Out? If the Direction is In, then Port Direction can only be Dst. If the Direction is Out, then Port Direction can be Dst or Src. Which Port direction should I choose? Thanks for any help. This is utterly confusing to me. No amount of googling helped me. There is no help page for this router. Did anyone get this working or is my best choice to buy another router? thanks for any help raju -- Kamaraju S Kusumanchi http://malayamaarutham.blogspot.com/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jda0il$or9$1...@dough.gmane.org
Re: [OT] web email acct compromised
T o n g wrote: On Sun, 25 Dec 2011 07:47:42 -0600, hvw59601 wrote: Recently one of my Yahoo accts was compromised. Mail was sent all over the place with nonsense, to LDU also. [. . . ] And how is an account compromised? Looks like it's a growing trend to me. One of my friend was hit a while ago as well. Because she is not that tech savvy, I couldn't figure out how it actually happened either. Do you have any clue yourself? snip It's a seldomly used Yahoo! account. It happened once before also with a Yahoo! account. AFAIK never with gmail. Hugo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jda1kf$tdo$1...@dough.gmane.org
Re: Gnome 3 update makes PDFs open in inkscape
On Mon, 2011-12-26 at 08:38 +, Alan Chandler wrote: On 23/12/11 15:05, Ross Vandegrift wrote: Hello all, I recently pulled in the updates that brought Gnome 3. Now, anytime I try to open a PDF in iceweasel, they are opened with inkscape instead of evince. There's a bug filed on this problem (#613752), but it includes no workaround. gnome-control-center lets me specify preferred applications for only a scant few things, but not PDFs. Setting iceweasel's application/pdf to /usr/bin/evince doesn't help. I would be happy to remove inkscape, but gnome and gnome-desktop-environment depend on it. What is the right way around this? Right click on the file in Nautilus and choose properties. Select the Open With tab Either pick an application from the list and click the Set as Default button, or if its not there you will have to Show Other Applications first and select one from there. Alan, So far, it looks like this works perfectly. I'll post your info on the bug so others that hit this issue can find the solution in the future. Thanks a bunch! Ross signature.asc Description: This is a digitally signed message part
Re: [OT] web email acct compromised
On Monday 26 December 2011 14:50:56 hvw59601 wrote: T o n g wrote: On Sun, 25 Dec 2011 07:47:42 -0600, hvw59601 wrote: Recently one of my Yahoo accts was compromised. Mail was sent all over the place with nonsense, to LDU also. [. . . ] And how is an account compromised? Looks like it's a growing trend to me. One of my friend was hit a while ago as well. Because she is not that tech savvy, I couldn't figure out how it actually happened either. Do you have any clue yourself? snip It's a seldomly used Yahoo! account. It happened once before also with a Yahoo! account. AFAIK never with gmail. I once had a password changed. As far as I could tell, my account had not yet been used when I noticed and reclaimed the account. Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201112261514.26763.lisi.re...@gmail.com
Re: Menu Editor for KDE Launchpad on siduction is missing
On 27/12/11 00:48, Dr Sian Mountbatten wrote: Scott Ferguson wrote: On 25/12/11 10:23, Dr Sian Mountbatten wrote: But I would like to use the menu. So what has happened to the menu editor? A. Ask the people who made your product (siduction.org is *not* debian.org) OR B. Right-click on the KMenu Icon (bottom-left of the pane) and see if there's an entry there. C. type kmenuedit at a cli Installed kmenuedit In Debian Sid kmenuedit is available as a package for Motorola CPU (Amiga et al). If Siduction was identical to Sid it *would* be Sid ;-p and the Edit Applications ... line appeared on the klauncher. Edited the menu and saved, but when I actioned the menu, my new entry was not there. Still, progress of some kind. Not sure... logout and log back in (shouldn't be necessary). Check /var/log Check that it isn't a hidden menu entry. eg.:- $ grep -i showhidden .kde/share/config/kmenueditrc ShowHidden=true Then look in kmenuedit and ensure the Hidden entry isn't ticked. Backup up ~/.config/menus then check entries beneath there - modify as necessary. It's possible you didn't fill out all the required fields... perhaps retry (if your menu entry has vanished from kmenueditor) by copying an existing menu entry and editing, then saving. Cheers -- Iceweasel/Firefox extensions for finding answers to Debian questions:- https://addons.mozilla.org/en-US/firefox/collections/Scott_Ferguson/debian/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef89025.9010...@gmail.com
install and configuration network adapter
hi i have Debian 6.0.3 1.how can i check my network adapter install? 2.how can i configuration my network adapter? Intel Centrino Advanced-N 6205 Wireless Network Adapter Intel 82579LM 1000 Ethernet
Re: OT: deferring gmail's new look
Ashton Fagg wrote: On 26/12/11 06:19, Kelly Clowers wrote: Still no desktop app is as good as gmail. The searching and Conversations still have not been done right anywhere else. I'd agree if Gmail supported a plain-text only view setting, along with the use of a fixed-width font. Although the latter can be rectified with the help of Greasemonkey script. Of course there is no disputing that for people like me who are too lazy to maintain their own mail server, using Google Apps/Gmail for mail is the way to go (and the spam filtering is nice). I've recently started using Thunderbird (err...Icedove) over the web interface because I'm annoyed with many of the changes in the new look. (And the fact that I miss being able to set messages to be viewed in plain text only). And when you set up the old look, you are forever prompted to go to the new one :-( Hugo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jdaata$lav$1...@dough.gmane.org
Re: OT: deferring gmail's new look
On Sunday 25 December 2011 20:19:25 Kelly Clowers wrote: Still no desktop app is as good as gmail. The searching and Conversations still have not been done right anywhere else. One man's meat is another man's poison! The Conversations are the single thing I most dislike on GMail. They make such a mess of threading. To each his - or her - own. :-) Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201112261744.31318.lisi.re...@gmail.com
Re: port direction definition
On Lu, 26 dec 11, 09:32:51, Kamaraju S Kusumanchi wrote: I have laptop - router - internet. The router is Westell A90-750015-07. I am using Verizon DSL High Speed Internet. I have set up the apache server on port 8088. It works internally but not externally. So http://192.168.1.21:8088 works. However, I am not able to access the site if I try http://192.168.1.1:8088 or http://72.88.231.219:8088 I tried to set up the port forwarding in the router, but this process is very confusing. Consider these snapshots for example... snapshot1.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZYTcyNzNjNTYtZDY5OC00YTMzLWIxM2YtYTVmMTZkZjk3YmRh snapshot2.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZMzc3NWY1OTItMjYxMi00M2VmLThjMjEtNDRiZTc2ZDM4YTM3 snapshot3.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZM2Y4MzBjNDMtOTM4Yy00NmU4LTliZGEtMjkzMzJlYzk2NDAw In the router configuration (192.168.1.1), I chose Firewall Settings - Port Forwarding and I get snapshot1.jpeg. I then choose Add. This gives snapshot2.jpeg. There is no rule relevant to forwarding of http packets, so I click on create which gives snapshot3.jpeg. In snapshot3.jpeg, the field (1) Enter a name for the custom service: can be any random name. But what about (2)? Should I choose Port Forwarding or Port Triggering. I'd say Port Forwarding. The options in section 3 of snapshot3.jpeg are even more confusing. Under the Protocol, there are three options - tcp, udp, both. I guess I should choose both? I don't think you need both, tcp should be enough For Global PortStart, Global PortEnd should I choose 8088? For Base HostPort, should I choose 8088? Yes. Note: since I have to mess with the ports when doing the port forwarding I prefer to let the service always run on it's default port. Makes things easier in a lot of cases. What about Direction? In/Out? If the Direction is In, then Port Direction can only be Dst. If the Direction is Out, then Port Direction can be Dst or Src. Which Port direction should I choose? I think it should be In. Thanks for any help. This is utterly confusing to me. No amount of googling helped me. There is no help page for this router. Did anyone get this working or is my best choice to buy another router? No, there certainly is a way and other routers I've dealt with are just as confusing. This is one reason I welcome the switch to IPv6. Hope this helps, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: port direction definition
Kamaraju S Kusumanchi wrote: In snapshot3.jpeg, the field (1) Enter a name for the custom service: can be any random name. But what about (2)? Should I choose Port Forwarding or Port Triggering. Select Port Forwarding. Port Triggering is used to dynamically make a selection based upon outbound activity. But in this case you want to make a static configuration. The options in section 3 of snapshot3.jpeg are even more confusing. Under the Protocol, there are three options - tcp, udp, both. I guess I should choose both? Select TCP. Both is okay. HTTP for your web server is a TCP protocol and does not use UDP. Therefore the exact match is TCP. Specifying BOTH will allow both TCP and UDP and since you are not using UDP it won't hurt but will create a UDP route anyway. But since nothing is listening for UDP packets it won't hurt anything. For Global PortStart, Global PortEnd should I choose 8088? For Base HostPort, should I choose 8088? Yes to both. It is allowing you to specify a range of ports. For something like bittorrent you would need to specify a range of ports. Since you only have one port you should give the same port number to both ends of the range. What about Direction? In/Out? If the Direction is In, then Port Direction can only be Dst. If the Direction is Out, then Port Direction can be Dst or Src. Which Port direction should I choose? That is very confusing to me. I vote to select In. But I do not understand why it would provide an option for Out. After setting this up it is possible that the port forwarding will only work from the external network inbound to your internal network. That is, testing from your internal network may not be possible. This is because it would require your packages to exit your internal network, then be translated through the NAT function of your router to the external router address, then the router would need to realize that it matches the external router address and route it back down the same interface. That feature is often not allowed. Meaning that you will only be able to test if this is working from an external network. I often do this using an ssh connection to a text terminal and then using lynx, w3m, or elinks to poke at the web site. Thanks for any help. This is utterly confusing to me. No amount of googling helped me. There is no help page for this router. Did anyone get this working or is my best choice to buy another router? Those pages were confusing to me too. :-) Try the above suggestions first. Try testing only from a remote network. The odds are good that you will have this working with this modem. If all else fails then I would fallback to setting up your Debian machine as a DMZ host. DMZ host was one of the other options from the menu showed in your first screen image. A DMZ host forwards all incoming connections to the designated host. This means that your host machine will need to be secure against the hostile Internet. It will appear as if it is placed on the Internet directly. But Debian hosts are quite secure by default and are very suitable for that purpose. Review the open ports on your machine and if desired install a firewall (I recommend Shorewall) to block inbound access from your router to all but the web server. This is quite easy and adds a layer of protection. Bob signature.asc Description: Digital signature
makeinfo - which package?
Does anybody know in which package the program makeinfo can be found? Regards -- Dr Sian Mountbatten siduction user -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jdadq7$cjc$1...@speranza.aioe.org
Re: port direction definition
On Mon, Dec 26, 2011 at 11:00:37AM -0700, Bob Proulx wrote: Kamaraju S Kusumanchi wrote: In snapshot3.jpeg, the field (1) Enter a name for the custom service: can be any random name. But what about (2)? Should I choose Port Forwarding or Port Triggering. clippage q After setting this up it is possible that the port forwarding will only work from the external network inbound to your internal network. That is, testing from your internal network may not be possible. This is because it would require your packages to exit your internal network, then be translated through the NAT function of your router to the external router address, then the router would need to realize that it matches the external router address and route it back down the same interface. That feature is often not allowed. Meaning that you will only be able to test if this is working from an external network. I often do this using an ssh connection to a text terminal and then using lynx, w3m, or elinks to poke at the web site. I have server running on a little machine here, and I have a domain forwarded from dydns: http://tonybaldwin.homelinux.net but I can also view the stuff there via http://192.168.1.100:80 or, from http://localhost:80, and, even http://tattoine:80 (tattoine being the hostname for said machine on my network). A screenshot of my portforwarding: http://tonybaldwin.homelinux.net/images/portforwardls.jpg This is a linksys router, but not so different. ./tony -- http://www.baldwinsoftware.com sent using mutt --- ssh-rsa B3NzaC1yc2EDAQABAAAB AQC36TvTIaCR5Ft2nGWGcmRHKW6m3 ugvGXhP6gGjzfRZPD5rnExPMRJwle Wv4f5r4WZvtHIbFfrpxfX+DIaplx nilQWSSLclDynxeELjb7oXHrDw7V lqipUCohFq7U86lecT57yXoEmHNMH bzXY1f97nQN7iYW2+ZAjc+PWypwx+ Amr6dD9fuwCkg4O8j/HCVlp9hTdh GGT28YJG50joPiT5iueyKUvdkpyV Y0wOqSPSjiOFH/HFEaEN4fE0BmdXl Z+5up/bAgxLUdLim7mNoqA8ePfOnl 9/EknMK8fEz3NsNybFlCvKSPpmgc 40/Ubc8SI/dUfT2DmoBTRY7Y2xHH+p t...@baldwinsoftware.com - -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20111226190349.ga23...@deathstar.hsd1.ct.comcast.net
Re: Menu Editor for KDE Launchpad on siduction is missing
Scott Ferguson wrote: On 27/12/11 00:48, Dr Sian Mountbatten wrote: Scott Ferguson wrote: On 25/12/11 10:23, Dr Sian Mountbatten wrote: But I would like to use the menu. So what has happened to the menu editor? A. Ask the people who made your product (siduction.org is *not* debian.org) OR B. Right-click on the KMenu Icon (bottom-left of the pane) and see if there's an entry there. C. type kmenuedit at a cli Installed kmenuedit In Debian Sid kmenuedit is available as a package for Motorola CPU (Amiga et al). If Siduction was identical to Sid it *would* be Sid ;-p and the Edit Applications ... line appeared on the klauncher. Edited the menu and saved, but when I actioned the menu, my new entry was not there. Still, progress of some kind. Not sure... logout and log back in (shouldn't be necessary). Check /var/log Check that it isn't a hidden menu entry. eg.:- $ grep -i showhidden .kde/share/config/kmenueditrc ShowHidden=true Then look in kmenuedit and ensure the Hidden entry isn't ticked. Backup up ~/.config/menus then check entries beneath there - modify as necessary. It's possible you didn't fill out all the required fields... perhaps retry (if your menu entry has vanished from kmenueditor) by copying an existing menu entry and editing, then saving. Looked at the file in ~/.config/menus and the entry is there but it does not appear in the menu when actuated. Your comments are welcome. -- Dr Sian Mountbatten siduction user -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jdafes$g7h$1...@speranza.aioe.org
Re: makeinfo - which package?
On 12/26/2011 01:18 PM, Dr Sian Mountbatten wrote: Does anybody know in which package the program makeinfo can be found? Regards $ which makeinfo /usr/bin/makeinfo dpkg -S /usr/bin/makeinfo texinfo: /usr/bin/makeinfo WT -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef8c5f9.4070...@gmail.com
Re: port direction definition
Tony Baldwin wrote: Bob Proulx wrote: After setting this up it is possible that the port forwarding will only work from the external network inbound to your internal network. ... I have server running on a little machine here, and I have a domain forwarded from dydns: http://tonybaldwin.homelinux.net but I can also view the stuff there via http://192.168.1.100:80 or, from http://localhost:80, and, even http://tattoine:80 (tattoine being the hostname for said machine on my network). A screenshot of my portforwarding: http://tonybaldwin.homelinux.net/images/portforwardls.jpg This is a linksys router, but not so different. I didn't say that it would not work. I said it might not work. It is certainly possible it will work. But in my experience it is more likely that it will not. This can be very frustrating when trying to test if you think that it will work, test from the internal network, find that it isn't working for you, believe that it isn't working for anyone, keep changing the configuration trying to make it work, when really it was working okay from the external network. Been there, done that, trying to save others some of that thrash. Wow, your signature block is very long! -- http://www.baldwinsoftware.com sent using mutt --- ssh-rsa B3NzaC1yc2EDAQABAAAB AQC36TvTIaCR5Ft2nGWGcmRHKW6m3 ugvGXhP6gGjzfRZPD5rnExPMRJwle Wv4f5r4WZvtHIbFfrpxfX+DIaplx nilQWSSLclDynxeELjb7oXHrDw7V lqipUCohFq7U86lecT57yXoEmHNMH bzXY1f97nQN7iYW2+ZAjc+PWypwx+ Amr6dD9fuwCkg4O8j/HCVlp9hTdh GGT28YJG50joPiT5iueyKUvdkpyV Y0wOqSPSjiOFH/HFEaEN4fE0BmdXl Z+5up/bAgxLUdLim7mNoqA8ePfOnl 9/EknMK8fEz3NsNybFlCvKSPpmgc 40/Ubc8SI/dUfT2DmoBTRY7Y2xHH+p t...@baldwinsoftware.com Are you really intending to include 19 lines of signature with your email messages? That is quite a lot! Especially for something that isn't very useful to others. Bob signature.asc Description: Digital signature
Re: OT: deferring gmail's new look
Hello Lisi ?! There is this cog-wheel, above in right corner. Click on it. Menue pops up and you can change there back to old design. This is googlemail-helpcenter topic ! There you can put any question concerning gmail. Regards. Val. cv.deb...@gmail.com 2011/12/26 Lisi lisi.re...@gmail.com: On Sunday 25 December 2011 20:19:25 Kelly Clowers wrote: Still no desktop app is as good as gmail. The searching and Conversations still have not been done right anywhere else. One man's meat is another man's poison! The Conversations are the single thing I most dislike on GMail. They make such a mess of threading. To each his - or her - own. :-) Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201112261744.31318.lisi.re...@gmail.com -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CALO-Nbo1HjhOMFshTnx2JQG+J5mLuKDdCD0r6zwGRTg--5=h...@mail.gmail.com
Re: port direction definition
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 12/26/2011 08:00 PM, Andrei Popescu wrote: This is one reason I welcome the switch to IPv6. Just out of curiosity: can you be more specific on this issue? (please excuse me for being a bit off-topic). TIA, Victor -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Debian GNU/Linux - Romania iQEcBAEBAgAGBQJO+M1uAAoJEMn1b0XNY6wKmacH+QEbtdF3GRh4ac9BOK0gjOk1 n+ILvQwd4fg+xsMKNgU4GWGQ/1BOslo28ligRa1dLjRaWGps+cm3hfY7vHxO4uqq 6OfoSzwdYJoyN8o37DvWIXHJ7e0BUZZzeofe8NGFTIJKpaDSoGxzIbs0/w/mXEIS k/BIC4w0q94BxOMY5JLUZ5Il8lgNyVuadW4/UfDyIXjH5QE5geg7DFxJ29/26jL5 P7yHyPIIO+YyNn/23V9BziymbjtmWFkMH2GX0qWux/J3+N4lI4CAyQnRX0tOb7S1 Faa2qICESLP8WQ+3d67/N5kiQO83C9NvHnMD1sJgxT0k37adxmcNJ7F8jJ/ccIw= =GXSS -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef8cd6f.7010...@debian-linux.ro
Re: port direction definition
Bob Proulx wrote: Kamaraju S Kusumanchi wrote: In snapshot3.jpeg, the field (1) Enter a name for the custom service: can be any random name. But what about (2)? Should I choose Port Forwarding or Port Triggering. Select Port Forwarding. Port Triggering is used to dynamically make a selection based upon outbound activity. But in this case you want to make a static configuration. I followed yours and Andrei's suggestion and it worked like a charm. I chose Port Forwarding, Protocol=both, Global PortStart=8088, Global PortEnd=8088, BaseHostPort=8088, Direction=In. Then assigned this service to my laptop. What about Direction? In/Out? If the Direction is In, then Port Direction can only be Dst. If the Direction is Out, then Port Direction can be Dst or Src. Which Port direction should I choose? That is very confusing to me. I vote to select In. But I do not understand why it would provide an option for Out. After setting this up it is possible that the port forwarding will only work from the external network inbound to your internal network. That is, testing from your internal network may not be possible. This is because it would require your packages to exit your internal network, then be translated through the NAT function of your router to the external router address, then the router would need to realize that it matches the external router address and route it back down the same interface. That feature is often not allowed. Meaning that you will only be able to test if this is working from an external network. I often do this using an ssh connection to a text terminal and then using lynx, w3m, or elinks to poke at the web site. You are absolutely right. It does not work internally but if I go to an external machine and view the website it works. I've previously tried the same configuration but I was always testing it internally. So, it looked as if it did not work. Thanks for all the help. raju -- Kamaraju S Kusumanchi http://malayamaarutham.blogspot.com/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jdakcn$bl0$1...@dough.gmane.org
Re: port direction definition
Andrei Popescu wrote: For Global PortStart, Global PortEnd should I choose 8088? For Base HostPort, should I choose 8088? Yes. Note: since I have to mess with the ports when doing the port forwarding I prefer to let the service always run on it's default port. Makes things easier in a lot of cases. The various posts on the internet suggested that Verizon blocks port 80. To eliminate that, I was using 8088. I just now checked... the web server works on port 80 too! Thanks for all the help. raju -- Kamaraju S Kusumanchi http://malayamaarutham.blogspot.com/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jdal5h$hgt$1...@dough.gmane.org
Re: port direction definition
On Lu, 26 dec 11, 15:24:16, Kamaraju S Kusumanchi wrote: The various posts on the internet suggested that Verizon blocks port 80. To eliminate that, I was using 8088. I just now checked... the web server works on port 80 too! I meant that it is not really useful to change the port *both* in the servers config and the router. Outside hosts will see the outside port anyway and inside will just use the default (which means you don't need to access http://192.168.1.xx:8088 to test) Hope this explains, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: port direction definition
On Lu, 26 dec 11, 21:39:27, Victor Nitu wrote: On 12/26/2011 08:00 PM, Andrei Popescu wrote: This is one reason I welcome the switch to IPv6. Just out of curiosity: can you be more specific on this issue? (please excuse me for being a bit off-topic). As far as I understand the main benefit and driver for adopting IPv6 is that there are enough addresses for every host in your lan to have its own public IP address, which completely eliminates (the need for) masquerading and (D)NAT. Hope this explains, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: OT programming languages/ systems for advanced applications on Linux
On 12/25/2011 06:17 PM, Joel Rees wrote: Did you say you'd looked at Ruby? I didn't say, but, yes, I have looked at Ruby. It seems to be purpose-built for web stuff, which would help me with the web apps I'm wanting, but I don't know how well it would work for everything else. Well, lisp was mentioned. Which Debian Squeeze package do you recommend for hello, world! and STFW tutorials? Did you say you've messed around with yacc/lex and their derivatives? I've always thought of them as tools for building compilers. And there's also Forth, but you say you want support for familiar paradigms, so that may not be such a good suggestion. Forth looks similar to LISP. David -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef8f1b5.50...@holgerdanske.com
Re: OT programming languages/ systems for advanced applications on Linux
David Christensen wrote: Joel Rees wrote: Did you say you'd looked at Ruby? I didn't say, but, yes, I have looked at Ruby. It seems to be purpose-built for web stuff, which would help me with the web apps I'm wanting, but I don't know how well it would work for everything else. I like Ruby quite a bit. It wasn't designed for the web but was designed to be able to create a domain specific languages. Just like lisp and others before it. People have used that ability to target web frameworks and of late it is web frameworks that have made it extremely popular in those circles. But also other topic areas are also targeted too. It isn't just about the web. I used Ruby for a number of years before the Ruby on Rails framework existed. But Ruby suffers from being popular on platforms that lack a good package manager. That hurts it terribly on Debian because so many Ruby authors have written so much packaging code making it difficult or perhaps impossible to create a well behaved system package of it. It is difficult to use Ruby without a network connection in order to be able to download scripts on the fly from the network and run them on the fly as part of an installation. I keep waiting for Ruby to mature and get past these packaging problems. I hope that one day it will be as well packaged as Perl. But years have rolled by and still the problems continue. And there's also Forth, but you say you want support for familiar paradigms, so that may not be such a good suggestion. Forth looks similar to LISP. Hmm... Maybe in an abstract concept way. They are both small core languages and in that way are similar. But I think they are also significantly different in practical use. For example Forth's interactive shell and associated syntax is fairly suitable as a command shell. It's low memory footprint makes it ideal for small embedded machines. I have seen it used in a lot of machine control applications. Lisp isn't a language I would want to try to type in on the command line. It is a language that I would rather interact with inside an editor. Lisp depends upon dynamic strings and garbage collection to the extent that it hasn't traditionally been a choice of embedded systems developers. Bob signature.asc Description: Digital signature
Re: OT programming languages/ systems for advanced applications on Linux
On Tue, Dec 27, 2011 at 7:14 AM, David Christensen dpchr...@holgerdanske.com wrote: On 12/25/2011 06:17 PM, Joel Rees wrote: Did you say you'd looked at Ruby? I didn't say, but, yes, I have looked at Ruby. It seems to be purpose-built for web stuff, which would help me with the web apps I'm wanting, but I don't know how well it would work for everything else. Yeah, it's well advertised for webbish stuff, but the guy who wrote it did/does not intend to limit it to the web. It's worth a play or two without rails, at least. Well, lisp was mentioned. Which Debian Squeeze package do you recommend for hello, world! and STFW tutorials? Not enough experience with it to make a recommendation, so I'll defer to Teemu on that. (I already had SBCL loaded, and I'm loading emacs-slime now to take a look. Did you say you've messed around with yacc/lex and their derivatives? I've always thought of them as tools for building compilers. ergo, special purpose languages. They aren't as easy to use, for me, as Forth, but they should scale better than (existing implementations of) Forth (unless you can figure out what Chuck is doing with colorforth and ride that wave, but it looks like a wild ride to me). And there's also Forth, but you say you want support for familiar paradigms, so that may not be such a good suggestion. Forth looks similar to LISP. Sometimes I think of Forth as Lisp reversed, without the parentheses and the mathematical rigor that parentheses allow. Lacking those would contribute to the difficulty of getting Forth to scale. (I keep thinking I need to dig deeper into lisp and its progeny -- Scheme, etc..) Joel Rees -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caar43inr2ck+e5b5uhtiaym1e7frqqyh2g4exvtveeh34z1...@mail.gmail.com
Re: port direction definition
On 27/12/11 05:00, Andrei Popescu wrote: On Lu, 26 dec 11, 09:32:51, Kamaraju S Kusumanchi wrote: I have laptop - router - internet. The router is Westell A90-750015-07. I am using Verizon DSL High Speed Internet. I have set up the apache server on port 8088. It works internally but not externally. So http://192.168.1.21:8088 works. However, I am not able to access the site if I try http://192.168.1.1:8088 or http://72.88.231.219:8088 I tried to set up the port forwarding in the router, but this process is very confusing. Consider these snapshots for example... snapshot1.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZYTcyNzNjNTYtZDY5OC00YTMzLWIxM2YtYTVmMTZkZjk3YmRh snapshot2.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZMzc3NWY1OTItMjYxMi00M2VmLThjMjEtNDRiZTc2ZDM4YTM3 snapshot3.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZM2Y4MzBjNDMtOTM4Yy00NmU4LTliZGEtMjkzMzJlYzk2NDAw In the router configuration (192.168.1.1), I chose Firewall Settings - Port Forwarding and I get snapshot1.jpeg. I then choose Add. This gives snapshot2.jpeg. There is no rule relevant to forwarding of http packets, so I click on create which gives snapshot3.jpeg. In snapshot3.jpeg, the field (1) Enter a name for the custom service: can be any random name. But what about (2)? Should I choose Port Forwarding or Port Triggering. I'd say Port Forwarding. The options in section 3 of snapshot3.jpeg are even more confusing. Under the Protocol, there are three options - tcp, udp, both. I guess I should choose both? I don't think you need both, tcp should be enough For Global PortStart, Global PortEnd should I choose 8088? For Base HostPort, should I choose 8088? Yes. Note: since I have to mess with the ports when doing the port forwarding I prefer to let the service always run on it's default port. Makes things easier in a lot of cases. What about Direction? In/Out? If the Direction is In, then Port Direction can only be Dst. If the Direction is Out, then Port Direction can be Dst or Src. Which Port direction should I choose? I think it should be In. Thanks for any help. This is utterly confusing to me. No amount of googling helped me. There is no help page for this router. Did anyone get this working or is my best choice to buy another router? No, there certainly is a way and other routers I've dealt with are just as confusing. This is one reason I welcome the switch to IPv6. Hope this helps, Andrei The above sound right. Check this is there's still any confusion:- http://portforward.com/english/routers/port_forwarding/Westell/A90-750015-07/Apache.htm Cheers -- Iceweasel/Firefox extensions for finding answers to Debian questions:- https://addons.mozilla.org/en-US/firefox/collections/Scott_Ferguson/debian/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef90579.3050...@gmail.com
Re: OT programming languages/ systems for advanced applications on Linux
Which Debian Squeeze package do you recommend for hello, world! and STFW tutorials? Not enough experience with it to make a recommendation, so I'll defer to Teemu on that. (I already had SBCL loaded, and I'm loading emacs-slime now to take a look. Digging around, I find a nice surprise on the Wikipedia page for common lisp: http://en.wikipedia.org/wiki/Common_Lisp Drop down below the index and there is a nice tutorial. (It seems that, in their attempt to be rigorous and, well, Encyclopaediac, they've been abandoning these kinds of pages. That's one of my disappointments in the current directions of Wikipedia.) Joel Rees -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caar43inmtd50juys7gsjjnaep02mld+dgorgm+abpjsehfn...@mail.gmail.com
Re: OT programming languages/ systems for advanced applications on Linux
On 12/26/2011 01:12 AM, Teemu Likonen wrote: That's Common Lisp. I think SBCL is the most popular free-software implementation for the language. Emacs+Slime is the most popular development environment. I've installed all three packages and will play with them. Usenet group comp.lang.lisp is a good place for discussing Common Lisp. OK. David -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef906ba.2020...@holgerdanske.com
Re: OT programming languages/ systems for advanced applications on Linux
On 12/26/2011 02:54 PM, Bob Proulx wrote: But Ruby suffers from being popular on platforms that lack a good package manager. That hurts it terribly on Debian because so many Ruby authors have written so much packaging code making it difficult or perhaps impossible to create a well behaved system package of it. It is difficult to use Ruby without a network connection in order to be able to download scripts on the fly from the network and run them on the fly as part of an installation. Thanks for the warning. David -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef907c6.2070...@holgerdanske.com
Re: port direction definition
Scott Ferguson wrote: On 27/12/11 05:00, Andrei Popescu wrote: On Lu, 26 dec 11, 09:32:51, Kamaraju S Kusumanchi wrote: I have laptop - router - internet. The router is Westell A90-750015-07. I am using Verizon DSL High Speed Internet. I have set up the apache server on port 8088. It works internally but not externally. So http://192.168.1.21:8088 works. However, I am not able to access the site if I try http://192.168.1.1:8088 or http://72.88.231.219:8088 I tried to set up the port forwarding in the router, but this process is very confusing. Consider these snapshots for example... snapshot1.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZYTcyNzNjNTYtZDY5OC00YTMzLWIxM2YtYTVmMTZkZjk3YmRh snapshot2.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZMzc3NWY1OTItMjYxMi00M2VmLThjMjEtNDRiZTc2ZDM4YTM3 snapshot3.jpeg - https://docs.google.com/open?id=0B4J6QB3eL1ZZM2Y4MzBjNDMtOTM4Yy00NmU4LTliZGEtMjkzMzJlYzk2NDAw In the router configuration (192.168.1.1), I chose Firewall Settings - Port Forwarding and I get snapshot1.jpeg. I then choose Add. This gives snapshot2.jpeg. There is no rule relevant to forwarding of http packets, so I click on create which gives snapshot3.jpeg. In snapshot3.jpeg, the field (1) Enter a name for the custom service: can be any random name. But what about (2)? Should I choose Port Forwarding or Port Triggering. I'd say Port Forwarding. The options in section 3 of snapshot3.jpeg are even more confusing. Under the Protocol, there are three options - tcp, udp, both. I guess I should choose both? I don't think you need both, tcp should be enough For Global PortStart, Global PortEnd should I choose 8088? For Base HostPort, should I choose 8088? Yes. Note: since I have to mess with the ports when doing the port forwarding I prefer to let the service always run on it's default port. Makes things easier in a lot of cases. What about Direction? In/Out? If the Direction is In, then Port Direction can only be Dst. If the Direction is Out, then Port Direction can be Dst or Src. Which Port direction should I choose? I think it should be In. Thanks for any help. This is utterly confusing to me. No amount of googling helped me. There is no help page for this router. Did anyone get this working or is my best choice to buy another router? No, there certainly is a way and other routers I've dealt with are just as confusing. This is one reason I welcome the switch to IPv6. Hope this helps, Andrei The above sound right. Check this is there's still any confusion:- http://portforward.com/english/routers/port_forwarding/Westell/A90-750015-07/Apache.htm Interesting link. Didn't know it existed. Too bad my router model isn't on it: 2Wire model 4011G-001 (ISP: Telmex). I already figured out how to do portforwarding on it for apache2 though. Thanks. Hugo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jdb19c$iup$1...@dough.gmane.org
Re: Menu Editor for KDE Launchpad on siduction is missing
On 27/12/11 05:46, Dr Sian Mountbatten wrote: Scott Ferguson wrote: On 27/12/11 00:48, Dr Sian Mountbatten wrote: Scott Ferguson wrote: On 25/12/11 10:23, Dr Sian Mountbatten wrote: But I would like to use the menu. So what has happened to the menu editor? A. Ask the people who made your product (siduction.org is *not* debian.org) OR B. Right-click on the KMenu Icon (bottom-left of the pane) and see if there's an entry there. C. type kmenuedit at a cli Installed kmenuedit In Debian Sid kmenuedit is available as a package for Motorola CPU (Amiga et al). If Siduction was identical to Sid it *would* be Sid ;-p and the Edit Applications ... line appeared on the klauncher. Edited the menu and saved, but when I actioned the menu, my new entry was not there. Still, progress of some kind. Not sure... logout and log back in (shouldn't be necessary). Check /var/log Check that it isn't a hidden menu entry. eg.:- $ grep -i showhidden .kde/share/config/kmenueditrc ShowHidden=true Then look in kmenuedit and ensure the Hidden entry isn't ticked. Backup up ~/.config/menus then check entries beneath there - modify as necessary. It's possible you didn't fill out all the required fields... perhaps retry (if your menu entry has vanished from kmenueditor) by copying an existing menu entry and editing, then saving. Looked at the file in ~/.config/menus and the entry is there but it does not appear in the menu when actuated. Your comments are welcome. So... did you check that it's not a hidden entry? Try backing up your ~/.kde and ~/.config (rename them), deleting the originals then logging out and logging back in again. Maybe the custom theme has broken things that aren't broken in Sid. NOTE: if you managed to install kmenuedit, then Siduction isn't even built from Sid. There's no similar bugs been reported for Sid - though it appears as if Siduction is blaming a problem on Debian:- http://translate.google.com/translate?sl=detl=enjs=nprev=_thl=enie=UTF-8layout=2eotf=1u=http%3A%2F%2Fsiduction.org%2Findex.php%3Fname%3DPNphpBB2 Once again - I'd suggest you take the issue up with the distribution. Cheers -- Iceweasel/Firefox extensions for finding answers to Debian questions:- https://addons.mozilla.org/en-US/firefox/collections/Scott_Ferguson/debian/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef90dab.7090...@gmail.com
Re: port direction definition
On 27/12/11 10:51, hvw59601 wrote: Scott Ferguson wrote: On 27/12/11 05:00, Andrei Popescu wrote: On Lu, 26 dec 11, 09:32:51, Kamaraju S Kusumanchi wrote: I have laptop - router - internet. The router is Westell A90-750015-07. I am using Verizon DSL High Speed Internet. I have set up the apache server on port 8088. It works internally but not externally. So http://192.168.1.21:8088 works. However, I am not able to access the site if I try http://192.168.1.1:8088 or http://72.88.231.219:8088 snipped Hope this helps, Andrei The above sound right. Check this is there's still any confusion:- http://portforward.com/english/routers/port_forwarding/Westell/A90-750015-07/Apache.htm Interesting link. Didn't know it existed. Too bad my router model isn't on it: 2Wire model 4011G-001 Instructions for setting up port-forwarding on that device are everywhere. eg. http://www.simpleportforwarding.com/supported-routers It's a *very* common (entry level) device. (ISP: Telmex). I already figured out how to do portforwarding on it for apache2 though. Thanks. Hugo Cheers -- Iceweasel/Firefox extensions for finding answers to Debian questions:- https://addons.mozilla.org/en-US/firefox/collections/Scott_Ferguson/debian/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ef91132.5080...@gmail.com
