Re: SSH - ssh-add est ce normal?
Bonjour Merci de ta reponse. Il existe su sous debian. Cordialement Hugues Le 17 mai 2012 22:15, mi demur mi.de...@tinet.cat a écrit : sous UNIX il existe la commande sudo; je ne sais pas si elle existe sous linux debian. il n'est pas si dangereux de travailler sous root quand on est conscient de ses actes. Le 17 mai 2012 21:24, Hugues MORIN mor...@gmail.com a écrit : Salut Je sais que c'est toujours dangereux d'utiliser root mais dans le cas present je ne vois pas comment faire autrement. J'ai besoin de pourvoir modifier la configuration du serveur. Il faut donc que je sois root sur le serveur. Comme je veux tester diverses solutions pour la configuration, j'ai besoin de pouvoir modifier les fichiers facilement. D'ou le choix de monter le serveur dans un dossier de ma machine locale. Ce n'est qu'une solution temporaire qui ne doit durer que le temps de la mise en place du serveur. Mais voila, sur ma machine locale il faut aussi que j'utilise aussi les droit de root pour pouvoir faire le montage. Je travaille sur ma machine locale en utilisant mon compte user (et pas le root) Le ssh-add doit etre refait en root lors de chaque session afin que je puisses connecter mon user. J'aimerai ne pas avoir a refaire cette operation a chaque redemarrage ou ouverture de session. Merci Cordialement Hugues Le 16 mai 2012 07:45, Yves Rutschle debian.anti-s...@rutschle.net a écrit : On Tue, May 15, 2012 at 04:43:16PM +0200, Sébastien NOBILI wrote: Autoriser root à se connecter en SSH n'est pas une bonne idée... Plusieurs raisons à ça : - dans les tentatives d'intrusion par force brute sur un SSH, il n'est pas rare de voir des tentatives avec l'utilisateur root, un jour ou l'autre l'une aboutira, Avec un mot de passe et fail2ban, c'est pratiquement impossible. Avec une clé, c'est pire. C'est une fausse raison. Par contre si on a peu confiance dans les utilisateurs locaux, si l'un d'entre arrive à prendre root sur la machine de départ, il l'a automatiquement sur la machine d'arrivée. Ou bien si un service root est compromis sur la machine de départ, pareil. Y. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120516054547.gp25...@naryves.com -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/cameenc3s53+w2fpajyfyq8mtyv0z+6otougttqhmvn1dm_f...@mail.gmail.com
Re: [HS] PB de compilation kernel 2.6
On 17/05/12 15:49, Bzzz wrote: Salut liste, étant donné que la plupart des kernels V.3.n ralentissent énormément mon vieux mono-cpu, j'ai voulu compiler un V.2.6 (2.6.39.4); cependant la compilation plante au bout de ~1'. Quelle architecture as-tu défini dans le fichier de configuration ? -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4fb767e7.1080...@free.fr
Re: Comment ne générer que les paquets binaires avec pbuilder
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 19/05/2012 01:39, Charles Plessy wrote: Le Fri, May 18, 2012 at 07:17:38PM +0200, Jean Baptiste FAVRE a écrit : Y-a-t'il moyen de dire à pbuilder de ne générer que les paquets binaires, si oui comment (je n'ai pas vu l'option dans le man et Google n'est pas prolixe sur le sujet). Bonjour, Il faut dire à pbuilder de le dire à dpkg-buildpackage avec l'option --debbuildopts. Ah ben oui, forcément... bon, je retourne à la lecture du man alors :-) Merci, JB -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk+3dyMACgkQM2eZoKJfKd2yvQCeNtTcdDCVue977voHajS8AnH7 fm0An36rCBwYLqQwKX3TAHatmDR5weJZ =A35t -END PGP SIGNATURE- -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4fb77723.9040...@jbfavre.org
ram qui ne diminue pas
bonjour, je viens vous exposer un petit soucis j'ai une debian squeeze a jour avec le noyaux 3.2.0 mais depuis toujours j'ai constaté que la mémoire avec la comande free -m ne diminuais jamais même après avoir tout stopé (bureau gnome, cups etc) quand je fais free -m ça me donne ça :: total used free sharedbuffers cached Mem: 7915 6348 1567 0 90 5985 -/+ buffers/cache:271 7644 Swap: 2008 0 2008 mon fichier ps aux en pièce jointe merci d'avance jérémy USER PID %CPU %MEMVSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 8544 808 ?Ss May17 0:02 init [2] root 2 0.0 0.0 0 0 ?SMay17 0:00 [kthreadd] root 3 0.0 0.0 0 0 ?SMay17 0:02 [ksoftirqd/0] root 6 0.0 0.0 0 0 ?SMay17 0:00 [migration/0] root 7 0.0 0.0 0 0 ?SMay17 0:00 [watchdog/0] root 8 0.0 0.0 0 0 ?SMay17 0:00 [migration/1] root10 0.0 0.0 0 0 ?SMay17 0:00 [ksoftirqd/1] root12 0.0 0.0 0 0 ?SMay17 0:00 [watchdog/1] root13 0.0 0.0 0 0 ?SMay17 0:00 [migration/2] root15 0.0 0.0 0 0 ?SMay17 0:00 [ksoftirqd/2] root16 0.0 0.0 0 0 ?SMay17 0:00 [watchdog/2] root17 0.0 0.0 0 0 ?SMay17 0:00 [migration/3] root19 0.0 0.0 0 0 ?SMay17 0:00 [ksoftirqd/3] root20 0.0 0.0 0 0 ?SMay17 0:00 [watchdog/3] root21 0.0 0.0 0 0 ?S May17 0:00 [cpuset] root22 0.0 0.0 0 0 ?S May17 0:00 [khelper] root23 0.0 0.0 0 0 ?SMay17 0:00 [kdevtmpfs] root24 0.0 0.0 0 0 ?S May17 0:00 [netns] root25 0.0 0.0 0 0 ?SMay17 0:00 [sync_supers] root26 0.0 0.0 0 0 ?SMay17 0:00 [bdi-default] root27 0.0 0.0 0 0 ?S May17 0:00 [kintegrityd] root28 0.0 0.0 0 0 ?S May17 0:00 [kblockd] root29 0.0 0.0 0 0 ?SMay17 0:00 [khungtaskd] root30 0.0 0.0 0 0 ?SMay17 0:00 [kswapd0] root31 0.0 0.0 0 0 ?SN May17 0:00 [ksmd] root32 0.0 0.0 0 0 ?SN May17 0:00 [khugepaged] root33 0.0 0.0 0 0 ?SMay17 0:00 [fsnotify_mark] root34 0.0 0.0 0 0 ?S May17 0:00 [crypto] root 135 0.0 0.0 0 0 ?SMay17 0:00 [khubd] root 178 0.0 0.0 0 0 ?S May17 0:00 [ata_sff] root 200 0.0 0.0 0 0 ?SMay17 0:00 [scsi_eh_0] root 201 0.0 0.0 0 0 ?SMay17 0:14 [scsi_eh_1] root 202 0.0 0.0 0 0 ?SMay17 0:00 [scsi_eh_2] root 203 0.0 0.0 0 0 ?SMay17 0:00 [scsi_eh_3] root 204 0.0 0.0 0 0 ?SMay17 0:00 [scsi_eh_4] root 205 0.0 0.0 0 0 ?SMay17 0:00 [scsi_eh_5] root 209 0.0 0.0 0 0 ?SMay17 0:00 [kworker/u:4] root 210 0.0 0.0 0 0 ?SMay17 0:02 [kworker/u:5] root 257 0.0 0.0 0 0 ?SMay17 0:00 [kjournald] root 341 0.0 0.0 17412 1364 ?Ss May17 0:00 udevd --daemon root 526 0.0 0.0 0 0 ?S May17 0:00 [cfg80211] root 606 0.0 0.0 0 0 ?S May17 0:00 [led_workqueue] root 619 0.0 0.0 0 0 ?S May17 0:00 [ttm_swap] root 694 0.0 0.0 0 0 ?S May17 0:00 [hd-audio0] root 735 0.0 0.0 0 0 ?S May17 0:00 [hci0] root 760 0.1 0.0 46984 1600 ?Ssl May17 3:53 /sbin/brltty -q root 938 0.0 0.0 0 0 ?SMay17 0:01 [jbd2/sda5-8] root 939 0.0 0.0 0 0 ?S May17 0:00 [ext4-dio-unwrit] root 1196 0.0 0.0 0 0 ?SN May17 0:00 [speakup] root 1204 0.0 0.0 120284 2032 ?Sl May17 0:00 /usr/sbin/rsyslogd -c4 root 1206 0.0 0.0 30196 924 ?Ss May17 0:00 /usr/bin/speechd-up -l1 102 1242 0.0 0.0 24056 1596 ?Ss May17 0:01 /usr/bin/dbus-daemon --system root 1249 0.0 0.0 390480 ?Ss May17 0:00 /usr/sbin/acpi_fakekeyd root 1279 0.0 0.0 0 0 ?SMay17 0:03 [flush-8:0] root 1286 0.0 0.0 4504 1104 ?Ss May17 0:01 /usr/sbin/acpid root 1401 0.0 0.0 6940 1056
Re: [HS] PB de compilation kernel 2.6
On Sat, 19 May 2012 11:29:11 +0200 Fabien R theedge...@free.fr wrote: Quelle architecture as-tu défini dans le fichier de configuration ? ? j'ai repassé en revue les options mais rien de spécifique sur l'archi; si tu veux dire le CPU, c'est athlon/duron/k7. -- BOFH excuse #367: Webmasters kidnapped by evil cult. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519133358.0d396b5b@anubis.defcon1
Re: ram qui ne diminue pas
On Sat, 19 May 2012 13:21:01 +0200 prego jérémy jer...@prego-network.net wrote: toujours j'ai constaté que la mémoire avec la comande free -m ne diminuais jamais même après avoir tout stopé (bureau gnome, cups etc) quand je fais free -m ça me donne ça :: total used free shared buffers cached Mem: 7915 6348 1567 0 90 5985 -/+ buffers/cache: 271 7644 Swap: 2008 0 2008 Ta mémoire doit être gelée, faut changer la carte-mère. Mouhahaharff -- All the passions make us commit faults; love makes us commit the most ridiculous ones. -- La Rochefoucauld -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519133816.082b9d2e@anubis.defcon1
Re: ram qui ne diminue pas
Le 19/05/2012 13:38, Bzzz a écrit : On Sat, 19 May 2012 13:21:01 +0200 prego jérémyjer...@prego-network.net wrote: toujours j'ai constaté que la mémoire avec la comande free -m ne diminuais jamais même après avoir tout stopé (bureau gnome, cups etc) quand je fais free -m ça me donne ça :: total used free shared buffers cached Mem: 7915 6348 1567 0 90 5985 -/+ buffers/cache: 271 7644 Swap: 2008 0 2008 Ta mémoire doit être gelée, faut changer la carte-mère. comment ça ? si ça peut aider si je regarde la température du proc avec acpi en ce moment il est encore a 78 ° c'est un pc portable ASUS K53SC merci pour les renseignements complémentaires -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4fb78850.9010...@prego-network.net
Re: ram qui ne diminue pas
On Sat, May 19, 2012 at 01:21:01PM +0200, prego jérémy wrote: bonjour, Bonjour, j'ai une debian squeeze a jour avec le noyaux 3.2.0 mais depuis toujours j'ai constaté que la mémoire avec la comande free -m ne diminuais jamais Ce n'est pas un problème en soit. total used free sharedbuffers cached Mem: 7915 6348 1567 0 90 5985 Le noyau maintient un cache des derniers fichiers lus ou écrits en mémoire (colonne cached), ce qui permet accélerer les traitements. C'est tout à fait normal. Il n'est pas nécessaire d'y changer quoi que ce soit. -- Nicolas -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519115245.ga11...@petole.demisel.net
Re: ram qui ne diminue pas
On Sat, 19 May 2012 13:47:28 +0200 prego jérémy jer...@prego-network.net wrote: Ta mémoire doit être gelée, faut changer la carte-mère. comment ça ? si ça peut aider si je regarde la température du proc avec acpi en ce moment il est encore a 78 ° c'est un pc portable ASUS K53SC Nan, j'déconne (faut dérouler les emails jusqu'au bout...) C'est normal: le système ne libère la RAM préemptée pour le cache que lorsque c'est réellement nécessaire, ce qui te permet d'avoir une conso de swap = 0. Par contre, 78°C, ça fait bcp, même pour un portable; il n'y aurait pas des moutons sur les radiateurs? -- Home on the Range was originally written in beef-flat. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519135833.6ab86886@anubis.defcon1
Re: ram qui ne diminue pas
Salut, Le 19/05/2012 13:21, prego jérémy a écrit : j'ai une debian squeeze a jour avec le noyaux 3.2.0 mais depuis toujours j'ai constaté que la mémoire avec la comande free -m ne diminuais jamais Linux est malin : tu as de la ram, il l'utilise (principalement pour les caches dans ton cas, vu qu'il n'a rien d'autre à mettre dedans). Où est le problème ? cf http://sourcefrog.net/weblog/software/linux-kernel/free-mem.html et plein d'autres liens similaires en cherchant un peu. ++ KP -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4fb78833.7070...@gmail.com
Re: ram qui ne diminue pas
Le 19/05/2012 13:58, Bzzz a écrit : On Sat, 19 May 2012 13:47:28 +0200 prego jérémyjer...@prego-network.net wrote: Ta mémoire doit être gelée, faut changer la carte-mère. comment ça ? si ça peut aider si je regarde la température du proc avec acpi en ce moment il est encore a 78 ° c'est un pc portable ASUS K53SC Nan, j'déconne (faut dérouler les emails jusqu'au bout...) oui désolé, vu que mon lecteur d'écrant me disais que vite vide je penser que le mail était terminé je les vu par la suite mes excuses C'est normal: le système ne libère la RAM préemptée pour le cache que lorsque c'est réellement nécessaire, ce qui te permet d'avoir une conso de swap = 0. ok Par contre, 78°C, ça fait bcp, même pour un portable; il n'y aurait pas des moutons sur les radiateurs? ça je peux pas trop dire je viens de passer un petit coup d'aspirateur, je vais voir par la suite. merci en tout cas pour vos réponses -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4fb78f4c.2060...@prego-network.net
Re: ram qui ne diminue pas
Le 19/05/2012 13:46, Ken-Patrick Lehrmann a écrit : Salut, Le 19/05/2012 13:21, prego jérémy a écrit : j'ai une debian squeeze a jour avec le noyaux 3.2.0 mais depuis toujours j'ai constaté que la mémoire avec la comande free -m ne diminuais jamais Linux est malin : tu as de la ram, il l'utilise (principalement pour les caches dans ton cas, vu qu'il n'a rien d'autre à mettre dedans). Où est le problème ? non non je penser que ça avai un lien avec la temperature de mon processeur donc je penser que quelque chose prenais de la ram cf et plein d'autres liens similaires en cherchant un peu. oui j'ai cherché mais en français j'ai pas trouver grand chose désolé merci en tout cas problème résolu. ++ KP -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4fb790b9.3010...@prego-network.net
Re: ram qui ne diminue pas
On Sat, 19 May 2012 14:17:16 +0200 prego jérémy jer...@prego-network.net wrote: Par contre, 78°C, ça fait bcp, même pour un portable; il n'y aurait pas des moutons sur les radiateurs? ça je peux pas trop dire je viens de passer un petit coup d'aspirateur, je vais voir par la suite. Souvent, ça ne suffit pas et il faut ouvrir la bête parce que les ailettes des radiateurs sont tellement serrées (moins de 2mm d'interstice) que si la poussière a été aspirée par le dessous elle bloque à la sortie - ça dépend aussi du sens de ventilation, mais il est à 99% en aspiration dessous et expulsion latérale/arrière. -- You can't depend on the man who made the mess to clean it up. -- Richard Nixon, 1952 -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519142539.7ad3e247@anubis.defcon1
Re: ram qui ne diminue pas
Le 19/05/2012 14:25, Bzzz a écrit : On Sat, 19 May 2012 14:17:16 +0200 prego jérémyjer...@prego-network.net wrote: Par contre, 78°C, ça fait bcp, même pour un portable; il n'y aurait pas des moutons sur les radiateurs? ça je peux pas trop dire je viens de passer un petit coup d'aspirateur, je vais voir par la suite. Souvent, ça ne suffit pas et il faut ouvrir la bête parce que les ailettes des radiateurs sont tellement serrées (moins de 2mm d'interstice) que si la poussière a été aspirée par le dessous elle bloque à la sortie - ça dépend aussi du sens de ventilation, mais il est à 99% en aspiration dessous et expulsion latérale/arrière. et niveau garenti cela ce passe comment ? puisque je suppose que l'on peut pas le faire nous même si le pc est sous garenti est-ce un motif légitime pour le renvoyé sous prétexte qu'il chauffe pas mal ? en tout cas pour le moment il a l'aire d'avoir apprécier ce que je lui est fais il tourne a 50 / 52 ° Jérémy -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4fb79281.6090...@prego-network.net
Re: ram qui ne diminue pas
Le 19/05/2012 14:30, prego jérémy a écrit : Le 19/05/2012 14:25, Bzzz a écrit : On Sat, 19 May 2012 14:17:16 +0200 prego jérémyjer...@prego-network.net wrote: Par contre, 78°C, ça fait bcp, même pour un portable; il n'y aurait pas des moutons sur les radiateurs? ça je peux pas trop dire je viens de passer un petit coup d'aspirateur, je vais voir par la suite. Souvent, ça ne suffit pas et il faut ouvrir la bête parce que les ailettes des radiateurs sont tellement serrées (moins de 2mm d'interstice) que si la poussière a été aspirée par le dessous elle bloque à la sortie - ça dépend aussi du sens de ventilation, mais il est à 99% en aspiration dessous et expulsion latérale/arrière. et niveau garenti cela ce passe comment ? puisque je suppose que l'on peut pas le faire nous même si le pc est sous garenti est-ce un motif légitime pour le renvoyé sous prétexte qu'il chauffe pas mal ? en tout cas pour le moment il a l'aire d'avoir apprécié ce que je lui ai fait il tourne a 50 / 52 ° Jérémy -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4fb793a3.2050...@prego-network.net
Re: ram qui ne diminue pas
On Sat, 19 May 2012 14:30:57 +0200 prego jérémy jer...@prego-network.net wrote: en tout cas pour le moment il a l'aire d'avoir apprécier ce que je lui est fais il tourne a 50 / 52 ° C'est déjà bcp plus raisonnable; essaye de voir avec d'autre possesseurs du même portable si des pointes à 78°C sont monnaie courante ou non. Vivement les portables équipés de plusieurs ARM multi-cores qui ne dépasseront pas les 40°C avec tout le monde à 100% :-) -- Let's show this prehistoric bitch how we do things downtown! -- The Ghostbusters -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519143814.4dfa5501@anubis.defcon1
Re: ram qui ne diminue pas
Le 19/05/2012 14:38, Bzzz a écrit : On Sat, 19 May 2012 14:30:57 +0200 prego jérémyjer...@prego-network.net wrote: en tout cas pour le moment il a l'aire d'avoir apprécier ce que je lui est fais il tourne a 50 / 52 ° C'est déjà bcp plus raisonnable; essaye de voir avec d'autre possesseurs du même portable si des pointes à 78°C sont monnaie courante ou non. Vivement les portables équipés de plusieurs ARM multi-cores qui ne dépasseront pas les 40°C avec tout le monde à 100% :-) re, apres tout depend de ce qui tourne sur ton pc en meme temps pour la temp du processeur, et si carte graphique séparée ou meme processeur ;) mes 2 centimes -- --- Les fautes d'orthographes de mes propos sont sous licence Ane bâté 1.0 « Je pense que la liberté est plus importante que les avancées technologiques. Je choisirai toujours un logiciel libre moins avancé du point de vue technologique à un logiciel non libre plus avancé parce ça ne vaudrait pas que je renonce à ma liberté. Je m’en tiens à cette règle : je ne prends rien que je ne puisse partager. » ( Richard Matthew Stallman ) Stallman is a saint in the Church of Emacs---Saint IGNUcius. --- -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4fb7979a.6070...@gmail.com
Re: ram qui ne diminue pas
On Sat, 19 May 2012 14:52:42 +0200 Sébastien Delbarre sebastien.delba...@gmail.com wrote: apres tout depend de ce qui tourne sur ton pc en meme temps pour la temp du processeur, et si carte graphique séparée ou meme processeur ;) Wai, mais 78°C c'est bcp, disons que jusqu'à 70°C en pointe ça peut encore passer, mais plus c'est risqué. Un simple mouton de la taille de l'ongle du petit doigt peut provoquer ça s'il s'est bloqué à l'entrée du radiateur de sortie. -- BOFH excuse #58: high pressure system failure -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519153343.5526ea90@anubis.defcon1
Re: ram qui ne diminue pas
Bonjour, Le 19 mai 2012, prego jérémy a écrit : non non je penser que ça avai un lien avec la temperature de mon processeur donc je penser que quelque chose prenais de la ram lancer en ligne de commande top. Il montre la RAM utilisée et les processus gourmands en ressources donc qui pourraient faire chauffer le CPU. En cas d'emballement d'une tâche qui ne veut pas s'arrêter normalement, il est possible de la tuer sous top. Une idée. -- Alain Rpnpif -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519135933.b5ca0d7...@chro.home
Re: ram qui ne diminue pas
On Sat, 19 May 2012 15:59:33 +0200 Alain Rpnpif rpn...@free.fr wrote: En cas d'emballement d'une tâche qui ne veut pas s'arrêter normalement, il est possible de la tuer sous top. wai, j'ai un faible pour killall -9 init, c'est radical :) -- Decorate your home. It gives the illusion that your life is more interesting than it really is. -- C. Schulz -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519161214.57e05d78@anubis.defcon1
Re: ram qui ne diminue pas
Le Sat, 19 May 2012 16:12:14 +0200, Bzzz lazyvi...@gmx.com a écrit : On Sat, 19 May 2012 15:59:33 +0200 Alain Rpnpif rpn...@free.fr wrote: En cas d'emballement d'une tâche qui ne veut pas s'arrêter normalement, il est possible de la tuer sous top. wai, j'ai un faible pour killall -9 init, c'est radical :) bonjour, avez-vous essayé vmstat? un exemple: root@alpha30:/etc# vmstat 2 désolé, je n'ai pas joint les résultats les colonnes ne sont pas alignées A+ JB1 -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519163125.0c46f67b.jacques.briq...@orange.fr
netbase 5 - plus de réseau
Bonjour, Suite à la mise de jour de Netbase dans testing, je n'ai plus de réseau. attention à : #672851 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672851 [*C*| |=] [netbase http://bugs.debian.org/cgi-bin/pkgreport.cgi?package=netbase] netbase 5.0: network connection does not come up upon reboothttp://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672851
Re: netbase 5 - plus de réseau
Le Sat, 19 May 2012 21:46:04 +0200 Orion tatacoco...@gmail.com a écrit: Bonjour, Suite à la mise de jour de Netbase dans testing, je n'ai plus de réseau. attention à : #672851 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672851 #[*C*| |=] [netbase http://bugs.debian.org/cgi-bin/pkgreport.cgi?package=netbase] netbase 5.0: network connection does not come up upon reboothttp://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672851 ça m'a semblé louche quand j'ai vu que la mise à jour de netbase forçait la suppression de ifupdown alors je n'ai pas fait la mise à jour de netbase. Manifestement il y a un problème de dépendance. Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519223117.bda731f798fa8ff0b8957...@neuf.fr
Re: netbase 5 - plus de réseau
Le Sat, 19 May 2012 22:31:17 +0200 Gaëtan PERRIER gaetan.perr...@neuf.fr a écrit: Le Sat, 19 May 2012 21:46:04 +0200 Orion tatacoco...@gmail.com a écrit: Bonjour, Suite à la mise de jour de Netbase dans testing, je n'ai plus de réseau. attention à : #672851 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672851 #[*C*| |=] [netbase http://bugs.debian.org/cgi-bin/pkgreport.cgi?package=netbase] netbase 5.0: network connection does not come up upon reboothttp://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672851 ça m'a semblé louche quand j'ai vu que la mise à jour de netbase forçait la suppression de ifupdown alors je n'ai pas fait la mise à jour de netbase. Manifestement il y a un problème de dépendance. Gaëtan D'ailleurs je viens juste de voir que la dernière version de ifupdown a été poussé dans testing en urgence ... La mise à jour de netbase devrait donc bien se passer maintenant (c'est le cas pour moi). Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519224025.c7b4a603027b064b1bffb...@neuf.fr
Re: netbase 5 - plus de réseau
On Sat, 19 May 2012 21:46:04 +0200 Orion tatacoco...@gmail.com wrote: Suite à la mise de jour de Netbase dans testing, je n'ai plus de réseau. attention à : #672851 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672851 Indisponibilité d'ifupdown, comme s/ sid il-y-a 48H, ça ne pose aucun PB, il suffit de lancer le réseau manuellement. -- A male gynecologist is like an auto mechanic who has never owned a car. -- Carrie Snow -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20120519224449.29ed5035@anubis.defcon1
Re: ram qui ne diminue pas
Hello Il y a quelques temps, je pondais un pavé (non ça fait pas mal...) pour expliquer la gestion de la mémoire sous Linux ; maintenant : http://www.linuxatemyram.com/ Bruno -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/2cb804be-f074-4519-bcee-c65118f77...@inertiacreeps.net
Re: regular ancho de banda postfix
El Fri, 18 May 2012 17:10:41 -0400, lester escribió: Quiero regular el ancho de banda de mi server postfix para que el envio smtp de mi relay_host se por ejemplo 20 KB, y asi no me ocupe todo el canal o alguna herramienta como QoS o CBQ pero mas sencilla y documentada para darle prioridad a los paquetes. No es necesario que abras otro hilo para preguntar lo mismo, sigue en el que estabas y si tienes alguna duda con las respuestas que has recibido, pregunta. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7hol$27j$1...@dough.gmane.org
Re: Hibernar en un fichero swap
El Sat, 19 May 2012 01:30:43 +0200, tahawk tahawk escribió: Hola, Ese html... Normalmente utilizo pm-hibernate en mi PC con debian testing para hibernar. Lo que quiero hacer es especificar yo donde quiero guardar los datos para haceelo en un fichero swap en vez de en la particion swap. He estado leyendo los mans pero no pone nada al respecto. http://wiki.debian.org/Hibernation/Hibernate_Without_Swap_Partition Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7htn$27j$2...@dough.gmane.org
Re: Repositorios en Lenny
El Fri, 18 May 2012 18:41:08 -0500, Martin Edmundo Barriga Orozco escribió: (ese html...) Hace unas semanas me encontré con unos mensajes queriendo hacer un update de mis sources list, en mi Debian Lenny del trabajo, a los pocos días, otro Debian lenny de mi casa presento el mismo síntoma. user@localhost:~$ sudo apt-get update (...) Err http://ftp.es.debian.org lenny/main Packages 404 Not Found W: Imposible obtener http://ftp.de.debian.org/debian/dists/lenny/main/binary-i386/Packages 404 Not Found. En el servidor, veo que el directorio [ http://ftp.de.debian.org/debian/ dists/lenny ] ya no existe. Seguro se preguntaran por mi archivo de configuración, para delimitar el problema y siendo mas simple únicamente deje la siguiente linea- deb http://ftp.de.debian.org/ debian lenny main. Esa ya no te va a servir, tienes que usar: deb http://archive.debian.org/debian/ lenny main non-free contrib A pensar de que logre hacer este update con la siguiente linea:- deb http://ftp.de.debian.org/debian stable main contrib non-free Lo dudo :-) Mi pregunta es muy simple, ¿Por que ya no existe el directorio http:/ /ftp.es.debian.org/debian/dists/lenny y sus subdirectorios? Ya no existe en esa ruta, se ha movido al archivo donde están las distribuciones que ya no tiene soporte (archive.debian.org). Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7ibd$27j$3...@dough.gmane.org
Re: [Noticia] Vuelve OpenOffice de la mano de Apache y con récord de descargas
El Fri, 18 May 2012 22:16:01 -0430, Miguel Matos escribió: Enlace: http://www.redusers.com/noticias/vuelve-openoffice-de-la-mano-de-apache-y-con-descargas-records/ Abro el hilo de mensajes para que escriban lo que se les ocurra. Para mí OpenOffice ha muerto. Viva LibreOffice :-) P.S. No sé por qué pero a mí me da que esa millonada de descargas tiene un gran porcentaje de usuarios que no saben siquiera que existe Libre Office, son personas que conocen la marca OOo como la alternativa gratuita al MS Office, buscan en la web y llegan al OOo, lo descargan lo instalan y listo. Personalmente creo que es una lástima que estos dos proyectos, ahora más compatibles y libres que nunca (y con menos fricciones), no unan sus esfuerzos y se centren en crear y desarrollar la mejor suite ofimática para todos los usuarios. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7iso$27j$4...@dough.gmane.org
Re: direct rendering off with xorg intel video driver
El Fri, 18 May 2012 22:57:08 -0500, Carlos Alberto Guzmán Murillo escribió: Saludos lista, (ese html...) Aunque he gastado bastante tiempo intentando solucionarlo, no he logrado activar el direct render en mi laptop. Uso debian(testing) con kernel Linux-2.6.32.5-amd64 y el chip de video es intel: En primer lugar, si tienes un adaptador intel, no tienes que hacer nada, se habilita automáticamente. En caso contrario, lo más probable es que se trate de un bug. Y en segundo lugar, wheezy (testing) lleva un kernel 3.2. ¿Estás seguro de que usas testing, no será squeeze (estable)? 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) (...) Kernel driver in use: i915 y ya tengo instalado el driver de xorg para intel. También tengo instalado los paquetes mesa-utils, glx-diversions, libgl1-mesa-glx y libg1-mesa-dri. Cuando hago glxinfo con LIBGL_DEBUG=verbose obtengo lo siguiente: name of display: :0.0 libGL: OpenDriver: trying /usr/lib32/dri/tls/i965_dri.so libGL: OpenDriver: trying /usr/lib32/dri/i965_dri.so libGL error: dlopen /usr/lib32/dri/i965_dri.so failed (/usr/lib32/dri/i965_dri.so: wrong ELF class: ELFCLASS32) (...) Ese tipo de error (wrong ELF class: ELFCLASS32) indica que el paquete es de la arquitectura incorrecta (32 bits cuando debería ser 64 bits). Y el resto de mensaje apuntan a un problema con las bibliotecas, no las encuentra... mira a ver si puedes subir el archivo /var/log/Xorg.0.log a algún sitio para que lo podamos ver. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7k08$27j$5...@dough.gmane.org
Re: Emparejar dispositivos bluetooth
El día 18 de mayo de 2012 19:46, Camaleón noela...@gmail.com escribió: El Fri, 18 May 2012 19:16:17 +0200, J. OCTAVIO Avalos escribió: El día 18 de mayo de 2012 16:40, Camaleón noela...@gmail.com escribió: A ver si lo entiendo... si no inicias NUNCA el MacOS: 1/ ¿No te funciona el ratón ni el teclado en la BIOS/REFIT ni en GRUB2? No. Solo funciona si previamente ha sido emparejado en Mac. Tan pronto como lo emparejo en Linux deja de funcionar en el REFIT y en el GRUB2. Pues vaya... pero entonces ¿de qué te sirve iniciar directamente en una sesión de GNOME sin pasar por la pantalla de inicio de sesión? El problema lo vas a seguir teniendo igual. Porque el demonio bluetooth cuando detectaba un dispositivo que aún no estaba emparejado emitía un mensaje emergente de solicitud de emparejamiento. El teclado para que funcione no necesita estar emparejado, tan solo que esté detectado, con la orden hidd --connect dirección mac ya funciona. Para emparejar un teclado no se necesita otro usb porque el demonio te indica que introduzcas el pin (por omisión, 8 dígitos en mac, 6 en linux) en el teclado bluetooth y pulses intro. El teclado comienza a funcionar. Pero entonces ¿Donde radica el problema? Mac no lo tiene. Si es configuración inicial en linux la situación es salvable. La dificultad aparece cuando los servicios ya están añadidos en Debian y la sesión anterior fue de Mac, única posibilidad que funcione en REFIT y GRUB2, Debian trata de activar los servicios intermitentemente con un encendido y apagado continuo. Sin resultado positivo. Creo que funciona con Ubuntu y con Mint. 2/ ¿No puedes configurar el menú de REFIT para que cargue el sistema que elijas de manera predeterminada para no tener que usar el teclado? Porque GRUB2 sí lo permite. Con REFIT no lo se. Pero si quiero entrar en con el GRUB2 en modo recovery deja de funcionar y ya no deja introducir la contraseña o darle el Crtl+D para que continúe. Lo que te permite GRUB2 es definir como predeterminada una de las opciones del menú y que cuando termine el contador lo arranque sin necesidad de que lo selecciones con el teclado, que no te funciona en este estadio del arranque. Obviamente, si el teclado no te funciona en GRUB2 no puedes elegir ninguna otra de las opciones del menú, eso está claro. Es como un maletín prácticamente sin tornillos, puedes cambiar cualquier dispositivo en menos que canta un gallo y 27 ' . Pero ... cuesta 3000,00 euros. Si los Mac analizados friamente, analizando componentes, diseño, funcionamiento etc. No son caros. Pues como en los HP pero estos son 100 veces más compatibles que los Mac. No digo que no, pero en este equipo funcionó todo a la primera. No tuve que tocarle nada. De aquí viene mi cabreo. El problema es cuando algo no funciona a la primera -como en este caso- que estás pillado por todos los lados: no puedes contactar con Apple porque no dan soporte a Linux y los desarrolladores (de refit o de linux) no pueden hacer nada porque Apple no les da las especificaciones. Así que al final lo que tienes es una bonita pieza de museo, preciosa y bellísima, pero que no puedes usar. Lo que pasa es que conociendo Debian tiene que haber alguna instrucción que cargue el bluetooth en el inicio. Te ha dado fuerte ¿eh? :-) A ver, el BT se carga al inicio y se carga en el GDM3, otra cosa es que sea capaz de emparejarse con tu teclado/ratón, que eso es otro cantar y por eso mismo deberías abrir un informe de fallo, para ver qué es lo que pasa en el iMac. Pero por lo menos tendría que funcionar con GRUB2, cosa que no sucede. Tendría que hacerlo antes del GDM3. Pues *eso* es lo único que podrías reportar, pero si se trata de un problema puro y duro de hardware, mal asunto, porque los desarrolladores no pueden hacer nada y Apple pasa de linux. Sin embargo en este equipo ya no se necesita bootcamp para instalar linux. Se hace como en cualquier otro PC. En lo que se refiere al REFIT, este ya contempla el arranque dual con linux o incluso triple. Lo que si existe es la posibilidad de que todo el sistema arranque desde GRUB2, sustituyendo a REFIT pero ignoro el resultado e incidencia en el funcionamiento del bluetooth. Si solo tuviese linux instalado me iba a suceder lo mismo porque en GDM3 si funciona porque previamente estuvieron emparejados en Linux, pero en GRUB2, No. Pues ya sabes... bug al canto. Así le vas cogiendo el gustillo :-) Entiendo que en modo recovery, igualmente tendría que funcionar. El modo de recuperación carga un entorno con los servicios mínimos, tendrás que ver si el servicio de BT para que funcionen estos dispositivos está activado, aunque lo dudo :-? Claro, pero según he leído en algún google-articulo de los pocos que hay es un fallo común con los teclados bluetooth. Aunque te comento que hay distribuciones que consiguieron hacerlo funcionar sin demasiadas complicaciones: Arch ... Un saludo -- Octavio Ávalos -- To UNSUBSCRIBE, email
Re: Emparejar dispositivos bluetooth
El Sat, 19 May 2012 11:52:30 +0200, J. OCTAVIO Avalos escribió: El día 18 de mayo de 2012 19:46, Camaleón noela...@gmail.com escribió: No. Solo funciona si previamente ha sido emparejado en Mac. Tan pronto como lo emparejo en Linux deja de funcionar en el REFIT y en el GRUB2. Pues vaya... pero entonces ¿de qué te sirve iniciar directamente en una sesión de GNOME sin pasar por la pantalla de inicio de sesión? El problema lo vas a seguir teniendo igual. Porque el demonio bluetooth cuando detectaba un dispositivo que aún no estaba emparejado emitía un mensaje emergente de solicitud de emparejamiento. Octavio, cuando estás en rEFIT o en GRUB no hay demonio bluetooh que valga, el sistema operativo no se ha cargado aún, así que estás en las mismas. Una vez dentro de GNOME (o en la pantalla de inicio de sesión) entonces sí puedes jugar con eso pero no antes. El teclado para que funcione no necesita estar emparejado, tan solo que esté detectado, con la orden hidd --connect dirección mac ya funciona. Y dale... a ver, ya sabemos que en linux funciona, el problema lo tienes antes de cargar linux, lo tienes en la BIOS del iMac y en GRUB. Es un problema de hardware. Para emparejar un teclado no se necesita otro usb porque el demonio te indica que introduzcas el pin (por omisión, 8 dígitos en mac, 6 en linux) en el teclado bluetooth y pulses intro. El teclado comienza a funcionar. Pero entonces ¿Donde radica el problema? El problema radica en que el teclado no funciona en rEFIT una vez que ha sido detectado, emparejado y configurado desde Linux. Mac no lo tiene. No, hombre, claro... ya sólo faltaría eso :-) Si es configuración inicial en linux la situación es salvable. La dificultad aparece cuando los servicios ya están añadidos en Debian y la sesión anterior fue de Mac, única posibilidad que funcione en REFIT y GRUB2, Debian trata de activar los servicios intermitentemente con un encendido y apagado continuo. Sin resultado positivo. Yo creo que se trata de un problema de hardware que se queda muerto (indetectable, imparejable, inútil) tras haberlo configurado desde linux. Lo único que se me ocurre es que antes de cerrar Debian desemparejes el teclado y el ratón, a ver si así, volviendo a una especie de reseteo, te vuelve a funcionar en rEFIT (auqnue tendrás que volver a emparejarlo en Debian). Creo que funciona con Ubuntu y con Mint. ¿Crees? Carga una LiveCD, prueba y con los resultados que obtengas te vas director al BTS de Debian. Llevamos más de 20 correos intercambiados y aún no has hecho ninguna prueba. ¡¡Hace falta acción!! El problema no se va a solucionar solo :-) Pero por lo menos tendría que funcionar con GRUB2, cosa que no sucede. Tendría que hacerlo antes del GDM3. Pues *eso* es lo único que podrías reportar, pero si se trata de un problema puro y duro de hardware, mal asunto, porque los desarrolladores no pueden hacer nada y Apple pasa de linux. Sin embargo en este equipo ya no se necesita bootcamp para instalar linux. Se hace como en cualquier otro PC. En lo que se refiere al REFIT, este ya contempla el arranque dual con linux o incluso triple. Lo que si existe es la posibilidad de que todo el sistema arranque desde GRUB2, sustituyendo a REFIT pero ignoro el resultado e incidencia en el funcionamiento del bluetooth. Ya sabes lo que opina rEFIT de los equipos de Apple: que los teclados y ratones vía BT sólo tienen soporte para MacOS y/o Windows. Entiendo que en modo recovery, igualmente tendría que funcionar. El modo de recuperación carga un entorno con los servicios mínimos, tendrás que ver si el servicio de BT para que funcionen estos dispositivos está activado, aunque lo dudo :-? Claro, pero según he leído en algún google-articulo de los pocos que hay es un fallo común con los teclados bluetooth. Aunque te comento que hay distribuciones que consiguieron hacerlo funcionar sin demasiadas complicaciones: Arch ... ¿A qué te refieres? Obviamente puedes cargar los demonios manualmente para que funcione el teclado/ratón BT en el modo de recuperación pero necesitarás hacerlo con un teclado con cable, naturalmente. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7tn4$27j$9...@dough.gmane.org
captura de pantalla - instalación debian 6
Buenas amigos, cuando se instala debian 6 hay una opción para hacer capturas de pantallas de la secuencia de la instalación que los va guardando en /var/log/archivo-de-la-imagen-capturado, pero después de terminar la instalación uno quiere ver pero no encuentra nada de la imágenes capturados. alguien me indicar como recuperar las imágenes capturados de la instalación, gracias -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cagbsza8uboaop5-c4s9v60cs7_u7vpecca-nyorbsirtc3-...@mail.gmail.com
Re: captura de pantalla - instalación debian 6
El 19/05/12, Constantino Vargas consvar...@gmail.com escribió: Buenas amigos, cuando se instala debian 6 hay una opción para hacer capturas de pantallas de la secuencia de la instalación que los va guardando en /var/log/archivo-de-la-imagen-capturado, pero después de terminar la instalación uno quiere ver pero no encuentra nada de la imágenes capturados. alguien me indicar como recuperar las imágenes capturados de la instalación, gracias -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cagbsza8uboaop5-c4s9v60cs7_u7vpecca-nyorbsirtc3-...@mail.gmail.com Hola! Pues yo no tuve ningún problema. Recuerdo haberlo hecho la última vez y encontrarlas sin ningún impedimento. Además las nombra según el paso de instalación en que se hacen. Seguro estás buscando en la ruta correcta? Ahora mismo ni la recuerdo ni la encuentro en Google. Saludos! Alfonso -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMZtU=8pqiHbNHERBHbhgVWXFo=zsdcrmooyzmum1bxcgsr...@mail.gmail.com
Re: captura de pantalla - instalación debian 6
El Sat, 19 May 2012 10:26:36 -0500, Constantino Vargas escribió: Buenas amigos, cuando se instala debian 6 hay una opción para hacer capturas de pantallas de la secuencia de la instalación que los va guardando en /var/log/archivo-de-la-imagen-capturado, pero después de terminar la instalación uno quiere ver pero no encuentra nada de la imágenes capturados. alguien me indicar como recuperar las imágenes capturados de la instalación, gracias Si has activado la opción de depuración, los registros deberían estar en /var/log/installer/. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8g05$27j$1...@dough.gmane.org
ls y break
Hola a todos. Me interesaría que en un script se utilizase el primer elemento de una carpeta únicamente para llevar a cabo una acción. Es decir si: $ ls carpeta aa bb cc busco una orden que devuelva aa. Buscando con ls --help, man ls y google lo más parecido que he encontrado es romper un ciclo for con break: for i in `ls carpeta`; do echo $i break done pero me parece raro que no haya una opción de ls para listar únicamente el primer elemento... sabéis si la hay? Muchas gracias de antemano a todos. Alfonso PD: si no quisiese hacer más operaciones después del done, que cambia entre el break y un exit 0? Gracias de nuevo. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMZtU=-YPDVWu3+uVA7R9yxHZMCi5jrHrkBp-qxdmtf4=za...@mail.gmail.com
RE: captura de pantalla - instalación debian 6
si persisten las molestias, esas capturas yo las haría con VirtualBox..., sin estress. Todo depende del uso que quieras darle, podría servirte o no. Saludos. Date: Sat, 19 May 2012 17:55:24 +0200 Subject: Re: captura de pantalla - instalación debian 6 From: a.egeacalle...@gmail.com To: consvar...@gmail.com CC: debian-user-spanish@lists.debian.org El 19/05/12, Constantino Vargas consvar...@gmail.com escribió: Buenas amigos, cuando se instala debian 6 hay una opción para hacer capturas de pantallas de la secuencia de la instalación que los va guardando en /var/log/archivo-de-la-imagen-capturado, pero después de terminar la instalación uno quiere ver pero no encuentra nada de la imágenes capturados. alguien me indicar como recuperar las imágenes capturados de la instalación, gracias -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cagbsza8uboaop5-c4s9v60cs7_u7vpecca-nyorbsirtc3-...@mail.gmail.com Hola! Pues yo no tuve ningún problema. Recuerdo haberlo hecho la última vez y encontrarlas sin ningún impedimento. Además las nombra según el paso de instalación en que se hacen. Seguro estás buscando en la ruta correcta? Ahora mismo ni la recuerdo ni la encuentro en Google. Saludos! Alfonso -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMZtU=qiHbNHERBHbhgVWXFo=dcrmooyzmum1bxcgsr...@mail.gmail.com
Re: ls y break
On 05/19/2012 01:06 PM, Alfonso Egea Callejas wrote: Hola a todos. Me interesaría que en un script se utilizase el primer elemento de una carpeta únicamente para llevar a cabo una acción. Es decir si: $ ls carpeta aa bb cc busco una orden que devuelva aa. Buscando con ls --help, man ls y google lo más parecido que he encontrado es romper un ciclo for con break: for i in `ls carpeta`; do echo $i break done pero me parece raro que no haya una opción de ls para listar únicamente el primer elemento... sabéis si la hay? no que yo sepa, pero podés encadenar comandos y para sacar los elementos del tope de una lista, tenés head: $ ls carpeta | head -n1 aa Saludos, Toote PD: si no quisiese hacer más operaciones después del done, que cambia entre el break y un exit 0? Gracias de nuevo. Depende del modo del shell. Tengo entendido que hay shells en el que si no especificás el código de salida con exit, no es lo mismo que hacer exit 0. En particular, creo que el código de salida sería el código de salida de lo último ejecutado o algo así (vas a tener que confirmar) Saludos, Toote -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4fb7c727.8030...@gmail.com
Re: ls y break
El Sat, 19 May 2012 18:06:37 +0200, Alfonso Egea Callejas escribió: Me interesaría que en un script se utilizase el primer elemento de una carpeta únicamente para llevar a cabo una acción. Es decir si: $ ls carpeta aa bb cc busco una orden que devuelva aa. Buscando con ls --help, man ls y google lo más parecido que he encontrado es romper un ciclo for con break: for i in `ls carpeta`; do echo $i break done pero me parece raro que no haya una opción de ls para listar únicamente el primer elemento... sabéis si la hay? Bueno, eso no es tarea para el comando ls, recuerda que en linux se prefiere aplicaciones pequeñas y muy especializadas para cada cosa :-) Muchas gracias de antemano a todos. Alfonso PD: si no quisiese hacer más operaciones después del done, que cambia entre el break y un exit 0? Gracias de nuevo. Aquí tienes la explicación de cada uno de ellos: http://www.gnu.org/software/bash/manual/html_node/Bourne-Shell-Builtins.html#Bourne-Shell-Builtins break break [n] Exit from a for, while, until, or select loop. If n is supplied, the nth enclosing loop is exited. n must be greater than or equal to 1. The return status is zero unless n is not greater than or equal to 1. exit exit [n] Exit the shell, returning a status of n to the shell's parent. If n is omitted, the exit status is that of the last command executed. Any trap on EXIT is executed before the shell terminates. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8hod$27j$2...@dough.gmane.org
Re: ls y break
El 19/05/12, Matías A. Bellone matiasbell...@gmail.com escribió: On 05/19/2012 01:06 PM, Alfonso Egea Callejas wrote: Hola a todos. Me interesaría que en un script se utilizase el primer elemento de una carpeta únicamente para llevar a cabo una acción. Es decir si: $ ls carpeta aa bb cc busco una orden que devuelva aa. Buscando con ls --help, man ls y google lo más parecido que he encontrado es romper un ciclo for con break: for i in `ls carpeta`; do echo $i break done pero me parece raro que no haya una opción de ls para listar únicamente el primer elemento... sabéis si la hay? no que yo sepa, pero podés encadenar comandos y para sacar los elementos del tope de una lista, tenés head: $ ls carpeta | head -n1 aa Sí, acabo de encontrarlo también. Usando pipes entre ls y head o tail puedes obtener todas las combinaciones posibles. Ejemplo: $ ls carpeta | head -2#muestra los dos primeros aa bb $ ls carpeta | tail -1 #muestra el último cc $ ls carpeta | head -2 | tail -1 #muestra el segundo bb Lástima no poder acceder a la posición deseada directamente con ls para que quedase más limpio :( pero bueno, todo tiene solución :D Saludos y muchas gracias Toote! Alfonso -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMZtU=_eds8n1jms8yjvvmlijgjw836gpu+zyaprd+6ojo+...@mail.gmail.com
Re: ls y break
El 19/05/12, Camaleón noela...@gmail.com escribió: El Sat, 19 May 2012 18:06:37 +0200, Alfonso Egea Callejas escribió: Me interesaría que en un script se utilizase el primer elemento de una carpeta únicamente para llevar a cabo una acción. Es decir si: $ ls carpeta aa bb cc busco una orden que devuelva aa. Buscando con ls --help, man ls y google lo más parecido que he encontrado es romper un ciclo for con break: for i in `ls carpeta`; do echo $i break done pero me parece raro que no haya una opción de ls para listar únicamente el primer elemento... sabéis si la hay? Bueno, eso no es tarea para el comando ls, recuerda que en linux se prefiere aplicaciones pequeñas y muy especializadas para cada cosa :-) Cierto, y de hecho me parece muy bien, pero como últimamente me paso el día en R esperaba algo como carpeta[1] o carpeta[2] :P del estilo $ ls carpeta -1 o $ ls carpeta --position=1 Muchas gracias de antemano a todos. Alfonso PD: si no quisiese hacer más operaciones después del done, que cambia entre el break y un exit 0? Gracias de nuevo. Aquí tienes la explicación de cada uno de ellos: http://www.gnu.org/software/bash/manual/html_node/Bourne-Shell-Builtins.html#Bourne-Shell-Builtins break break [n] Exit from a for, while, until, or select loop. If n is supplied, the nth enclosing loop is exited. n must be greater than or equal to 1. The return status is zero unless n is not greater than or equal to 1. exit exit [n] Exit the shell, returning a status of n to the shell's parent. If n is omitted, the exit status is that of the last command executed. Any trap on EXIT is executed before the shell terminates. Ok, en el caso de mi aplicación no tiene mucha importancia, pero muchas gracias! Me has hecho descubrir select :) Saludos, Alfonso -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAMZtU=-c_tQn-yDaP2RoPxZpu75u8DyAtmSygk=wfjya5qt...@mail.gmail.com
Problema con mysql cluster
Hola muy buenas, he implementado mysql cluster en debian lenny y la verdad es que va bastante bien. Estoy tratando de importar una bbdd que es bastante grande, ocupa 16 GB. Al hacer un: mysql -u root -p database mysql.sql Me reporta el siguiente error: Table is full... He estado mirando desde el cliente management de administración ejecutando este comando: ALL REPORT MEMORY USAGE Y se ve como poco a poco va subiendo el index y el data: ndb_mgm ALL REPORT MEMORY USAGE Node 2: Data usage is 80%(63 32K pages of total 8192) Node 2: Index usage is 7%(60 8K pages of total 8224) Node 3: Data usage is 81%(63 32K pages of total 8192) Node 3: Index usage is 7%(60 8K pages of total 8224) Cuando llega ya cerca del 91% se cae la importación del sql y devuelve: ERROR 1114 (HY000) at line 227: The table 'table_log' is full He estado mirando en la documentación de mysql y dice que el mysql cluster soporta comom áximo 8192MB de Data Memory. He probado a subirle el IndexMemory y el DataMemory a por ejemplo 16000 pero sigue con el mismo error. Es más, al ejecutarle el ALL REPORT MEMORY USAGE sigue teniendo 8192. Alguien me puede hechar una mano?? Saludos.
Re: Problema con mysql cluster
2012/5/19 Maykel Franco Hernández may...@maykel.sytes.net: Hola muy buenas, he implementado mysql cluster en debian lenny y la verdad es que va bastante bien. Estoy tratando de importar una bbdd que es bastante grande, ocupa 16 GB. Al hacer un: mysql -u root -p database mysql.sql Me reporta el siguiente error: Table is full... He estado mirando desde el cliente management de administración ejecutando este comando: ALL REPORT MEMORY USAGE Y se ve como poco a poco va subiendo el index y el data: ndb_mgm ALL REPORT MEMORY USAGE Node 2: Data usage is 80%(63 32K pages of total 8192) Node 2: Index usage is 7%(60 8K pages of total 8224) Node 3: Data usage is 81%(63 32K pages of total 8192) Node 3: Index usage is 7%(60 8K pages of total 8224) Eso aparentemente te dice la cantidad de páginas que tiene, no la cantidad de memoria utilizada. Cuando llega ya cerca del 91% se cae la importación del sql y devuelve: ERROR 1114 (HY000) at line 227: The table 'table_log' is full He estado mirando en la documentación de mysql y dice que el mysql cluster soporta comom áximo 8192MB de Data Memory. Depende de la versión, por lo que dice el manual de MySQL 5.0[1] tanto DataMemory como IndexMemory pueden ser entre 1Mb y 1Tb [1] http://dev.mysql.com/doc/refman/5.0/en/mysql-cluster-ndbd-definition.html#ndbparam-ndbd-datamemory He probado a subirle el IndexMemory y el DataMemory a por ejemplo 16000 pero sigue con el mismo error. Es más, al ejecutarle el ALL REPORT MEMORY USAGE sigue teniendo 8192. Estás leyendo mal los números reportados. Creo que la siguiente aclaración del manual podría ser lo que ocurre en tu caso: Currently, MySQL Cluster can use a maximum of 512 MB for hash indexes per partition, which means in some cases it is possible to get Table is full errors in MySQL client applications even when ndb_mgm -e ALL REPORT MEMORYUSAGE shows significant free DataMemory. This can also pose a problem with data node restarts on nodes that are heavily loaded with data. You can force NDB to create extra partitions for MySQL Cluster tables and thus have more memory available for hash indexes by using the MAX_ROWS option for CREATE TABLE. In general, setting MAX_ROWS to twice the number of rows that you expect to store in the table should be sufficient. Eso quiere decir que si tenés demasiadas filas en una sola partición con índices de ese tipo, estás llegando a ese límite. Saludos, Toote -- Web: http://www.enespanol.com.ar -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CANk6MLb6CVvhWMZhQCHqQfoQSHSmvfCjuEQic_QoyzSE56o5=q...@mail.gmail.com
Que alternativas a apache recomiendan para linux
Saludos a todos. Estaba buscando una alternativa al servidor web apache para usar en tanto en debian como windows, realmente mi pregunta es si hay uno mejor que apache, pues siempre he usado apache pero no se si me estoy perdiendo de algo al no usar otro servidor, que me recomiendan seguir con apache o buscar otras alternativas mejores? Buscando en la web encontré una comparación entre Apache y Nginx, en la cual se destacaba Nginx pero no muestran en que se basa la comparación. Que recomiendan para utilizar con linux... -- El desarrollo no es material es un estado de conciencia metal -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cadptstyyz6u7koj7x_1hc2nhknkzu5-pc4l1-zu5fhlke-y...@mail.gmail.com
Re: Que alternativas a apache recomiendan para linux
2012/5/20 Carlos Carcamo eazyd...@gmail.com: Saludos a todos. Estaba buscando una alternativa al servidor web apache para usar en tanto en debian como windows, realmente mi pregunta es si hay uno mejor que apache, pues siempre he usado apache pero no se si me estoy perdiendo de algo al no usar otro servidor, que me recomiendan seguir con apache o buscar otras alternativas mejores? Buscando en la web encontré una comparación entre Apache y Nginx, en la cual se destacaba Nginx pero no muestran en que se basa la comparación. Que recomiendan para utilizar con linux... Apache es el servidor web más usado y flexible. Otros como ngnix, cherokee o lighttpd son más ligeros, lo que normalmente se refleja en mejor desempeño (manejan más peticiones por segundo) cuando se comparan con Apache. Aunque no me extrañaría que un Apache pelado, es decir, con los mínimos módulos y funciones activas, rinda equivalente o mejor que sus compañeros. Realmente si no te obsesiona el rendimiento lo mejor es quedarse con Apache, ya que es de lejos el más ampliamente soportado y documentado. -- Marc -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ca+dcn_sxpjn80lymfwxdi9wy4xeez9fjef+kbcj2kxm_4jw...@mail.gmail.com
Re: Que alternativas a apache recomiendan para linux
On Sat, May 19, 2012 at 04:05:50PM -0600, Carlos Carcamo wrote: Saludos a todos. Estaba buscando una alternativa al servidor web apache para usar en tanto en debian como windows, realmente mi pregunta es si hay uno mejor que apache, pues siempre he usado apache pero no se si me estoy perdiendo de algo al no usar otro servidor, que me recomiendan seguir con apache o buscar otras alternativas mejores? Buscando en la web encontré una comparación entre Apache y Nginx, en la cual se destacaba Nginx pero no muestran en que se basa la comparación. Que recomiendan para utilizar con linux... ¿Tienes claras todas tus necesidades respecto a un servidor web? Porque eso condiciona bastante la respuesta, junto al tema del sistema operativo que mencionas. Saludos. -- Pablo Jiménez -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519235329.gd3...@emblema.fh.vtr.net
Re: Que alternativas a apache recomiendan para linux
El 19 de mayo de 2012 18:05, Carlos Carcamo eazyd...@gmail.com escribió: Saludos a todos. Estaba buscando una alternativa al servidor web apache para usar en tanto en debian como windows, realmente mi pregunta es si hay uno mejor que apache, pues siempre he usado apache pero no se si me estoy perdiendo de algo al no usar otro servidor, que me recomiendan seguir con apache o buscar otras alternativas mejores? Buscando en la web encontré una comparación entre Apache y Nginx, en la cual se destacaba Nginx pero no muestran en que se basa la comparación. Que recomiendan para utilizar con linux... -- El desarrollo no es material es un estado de conciencia metal -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cadptstyyz6u7koj7x_1hc2nhknkzu5-pc4l1-zu5fhlke-y...@mail.gmail.com depende para para que lo necesites, tienes monkey, cherokee, nginx, etc. -- Atte. Pablo Zúñiga E (+56 9) - 75195192 MSN Gtalk: pabl...@gmail.com | Skype: ed00m_ ===
Re: Que alternativas a apache recomiendan para linux
El 19 de mayo de 2012 19:54, Pablo Zuñiga pabl...@gmail.com escribió: El 19 de mayo de 2012 18:05, Carlos Carcamo eazyd...@gmail.com escribió: Saludos a todos. Estaba buscando una alternativa al servidor web apache para usar en tanto en debian como windows, realmente mi pregunta es si hay uno mejor que apache, pues siempre he usado apache pero no se si me estoy perdiendo de algo al no usar otro servidor, que me recomiendan seguir con apache o buscar otras alternativas mejores? Buscando en la web encontré una comparación entre Apache y Nginx, en la cual se destacaba Nginx pero no muestran en que se basa la comparación. Que recomiendan para utilizar con linux... -- El desarrollo no es material es un estado de conciencia metal -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cadptstyyz6u7koj7x_1hc2nhknkzu5-pc4l1-zu5fhlke-y...@mail.gmail.com depende para para que lo necesites, tienes monkey, cherokee, nginx, etc. -- Atte. Pablo Zúñiga E (+56 9) - 75195192 MSN Gtalk: pabl...@gmail.com | Skype: ed00m_ === Tambien tienes http://lmgtfy.com/?q=servidores+web+en+linux -- Atte. Pablo Zúñiga E (+56 9) - 75195192 MSN Gtalk: pabl...@gmail.com | Skype: ed00m_ ===
Re: ls y break
2012/5/19 Alfonso Egea Callejas a.egeacalle...@gmail.com: El 19/05/12, Camaleón noela...@gmail.com escribió: El Sat, 19 May 2012 18:06:37 +0200, Alfonso Egea Callejas escribió: Me interesaría que en un script se utilizase el primer elemento de una carpeta únicamente para llevar a cabo una acción. Es decir si: $ ls carpeta aa bb cc busco una orden que devuelva aa. Buscando con ls --help, man ls y google lo más parecido que he encontrado es romper un ciclo for con break: for i in `ls carpeta`; do echo $i break done pero me parece raro que no haya una opción de ls para listar únicamente el primer elemento... sabéis si la hay? Bueno, eso no es tarea para el comando ls, recuerda que en linux se prefiere aplicaciones pequeñas y muy especializadas para cada cosa :-) Cierto, y de hecho me parece muy bien, pero como últimamente me paso el día en R esperaba algo como carpeta[1] o carpeta[2] :P del estilo $ ls carpeta -1 o $ ls carpeta --position=1 Muchas gracias de antemano a todos. Alfonso PD: si no quisiese hacer más operaciones después del done, que cambia entre el break y un exit 0? Gracias de nuevo. Aquí tienes la explicación de cada uno de ellos: http://www.gnu.org/software/bash/manual/html_node/Bourne-Shell-Builtins.html#Bourne-Shell-Builtins break break [n] Exit from a for, while, until, or select loop. If n is supplied, the nth enclosing loop is exited. n must be greater than or equal to 1. The return status is zero unless n is not greater than or equal to 1. exit exit [n] Exit the shell, returning a status of n to the shell's parent. If n is omitted, the exit status is that of the last command executed. Any trap on EXIT is executed before the shell terminates. Ok, en el caso de mi aplicación no tiene mucha importancia, pero muchas gracias! Me has hecho descubrir select :) Saludos, Alfonso -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/camztu-c_tqn-ydap2ropxzpu75u8dyatmsygkwfjya5qt...@mail.gmail.com puedes mesclar ls con awk, es mas fácil. -- Carlos Albornoz C. Linux User #360502 Fono: +56997864420 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAJzi=f-smq6x4cjwpr3zx0zhh24rvrhmjgqxt_4h1yerurf...@mail.gmail.com
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Fri, May 18, 2012 at 3:25 PM, Arnt Karlsen a...@c2i.net wrote: On Fri, 18 May 2012 17:04:02 + (UTC), Camaleón wrote in message jp5ve2$jg9$1...@dough.gmane.org: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free ..if you _never_ install source, you don't need deb-src lines. True, but aptitude changelog ... seems to require deb-src ... entries: Without deb-src ... # aptitude changelog grub-pc Err Changelog of grub-pc E: You must put some 'source' URIs in your sources.list E: Changelog download failed: Download queue destroyed. E: Couldn't find a changelog for grub-pc With deb-src ... # aptitude changelog grub-pc Err Changelog of grub-pc E: Changelog download failed: 404 Not Found E: Couldn't find a changelog for grub-pc -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOdo=SxrT0Qr-4L7ug5qLdtz7XTe4qcoA=rsjlx1oj2vq8y...@mail.gmail.com
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Fri, 18 May 2012 17:57:56 -0500, Stan Hoeppner wrote: On 5/18/2012 9:39 AM, Shane Johnson wrote: After that I would look to see if something isn't shorting out a USB port. Yes, USB is the cause of the over-current errors, which is plainly evident in his screen shot. But we don't yet know if this USB problem is what's hanging the system. Further troubleshooting is required. The strange thing is as I mentioned in another post is that on the mb usb port 8 there's nothing attached and I haven't found where port 7 is :-? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7jgc$cje$1...@dough.gmane.org
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Fri, 18 May 2012 21:25:25 +0200, Arnt Karlsen wrote: On Fri, 18 May 2012 17:04:02 + (UTC), Camaleón wrote in message jp5ve2$jg9$1...@dough.gmane.org: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free ..if you _never_ install source, you don't need deb-src lines. (...) If you want to get rid of the above error, yes _you do_ (see Tom's comment) ;-) Anyway, I guess that can be a comestic error, the main problem was already reported in BTS (#669569). Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7ko0$27j$6...@dough.gmane.org
Re: Wheezy: aptitude update fails
On Fri, 18 May 2012 15:20:24 -0700, T Elcor wrote: --- On Fri, 5/18/12, Camaleón noela...@gmail.com wrote: Get: 3 http://ftp.us.debian.org wheezy/non-free Translation-en [61.5 kB] Err http://ftp.us.debian.org wheezy/main Translation-en 404 Not Found [IP: 128.61.240.89 80] Is this still hitting you? It could have been a transient error :-? Still having this problem. Weird, IPs change, so it doesn't look like a single failed server problem. Weird... I'm also using wheezy and haven't experienced any problem though I use apt-get update apt-get -V dist-upgrade to update the system. Are you (or your ISP) behind some kind of proxy? Tip: you can use a one-liner instead: deb http://ftp.us.debian.org/debian/ wheezy main non-free Tried it, the error is still there. Yes, it was just a cosmetic tip. I like having things ordered O:-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7lkl$27j$7...@dough.gmane.org
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Fri, 18 May 2012 21:55:36 +, Ramon Hofer wrote: On Fri, 18 May 2012 20:18:46 +, Camaleón wrote: Are you running Squeeze? Yes, sorry forgot to mention. I installed squeeze amd64 yesterday on a raid1 (just to try). Today when the card was here I put it in and couldn't boot. Then I installed squeeze with the card present without problems but booting afterwards didn't work again. Without the card installed bpo amd64 kernel but couldn't boot again. You have to be extremely precise while describing the situation because there are missing pieces in the above stanza and the whole steps you followed :-) Okay, let's start over. You installed the lsi card in one of the motherboard slots, configured the BIOS to use a JBOD disk layout and then boot the installation CD for Squeeze, right? The installation proccess was smoothly (you selected a mdadm configuration for the disks and then formatted them with no problems), when the installer finished and the system first rebooted, you selected the new installed system from GRUB2's menu and then, the booting proccess halted displaying the mentioned messages in the screen, right? And you installed the system with no glitches and then it hangs? Without the LSI card there are no problems (except the over-current message which is also present with only the mb and a disk). Installation works ok with and without card. So you think the system stalls because of the raid card despite you get the same output messages at boot and there's no additional evidence of a problem related to the hard disks or the controller. Mmm... weird it is, my young padawan :-) that's for sure but it can be something coming from your Supermicro motherboard's BIOS and the raid controller. Check if there's a BIOS update for your motherboard (but just check, don't install!) and if so, ask Supermicro technical support about the exact problems it corrects and tell them you are using a LSI raid card and you're having problems to boot your system from it. What's the point for listing the USB devices? :-? Because I thought I should mention the over-current message and it's related to usb. But I think it's a completely different thing. And I don't even know where port 7 is but port 8 is definitely empty :-? Yes, I agree. It seems an unrelated problem that you can try to solve once you correct the booting issue if the error still persists. Something wrong with udevd when listing an usb?? device or hub. Ok, unfortunately I have no clue what this means. But this message isn't there without card but it's pci-e? Ah, that's a very interesting discovery, man. To me it can mean the motherboard is not correctly detecting the card, hence a BIOS issue. Those messages are coming from the kernel side but I can't guess the source that trigger them. How can I find out what they mean? It seems as if many different problems lead to such messages? I would center first in solving the core of the problem. Mmm... the strange here is that there is no clear indication about the nature of the problem, that is, what's preventing your system from booting. Can you at least get into the single-user mode? I can't get to any login. Or is there a way to get into single-user mode? If you mean recovery mode: no luck either :-( Are you reaching the GRUB2 menu? If yes, you can select recovery mode/ single-user mode. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7o10$27j$8...@dough.gmane.org
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On 5/19/2012 2:52 AM, Ramon Hofer wrote: On Fri, 18 May 2012 17:57:56 -0500, Stan Hoeppner wrote: On 5/18/2012 9:39 AM, Shane Johnson wrote: After that I would look to see if something isn't shorting out a USB port. Yes, USB is the cause of the over-current errors, which is plainly evident in his screen shot. But we don't yet know if this USB problem is what's hanging the system. Further troubleshooting is required. The strange thing is as I mentioned in another post is that on the mb usb port 8 there's nothing attached and I haven't found where port 7 is :-? I wouldn't worry about the USB errors at this point. Unless there is some larger issue with insufficient power on the motherboard causing the USB current error, it's likely unrelated to the storage hardware issue. Fix it first, then worry about the USB errors. Given you have no device plugged into those ports, it could be a phantom error. -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4fb765a5.1020...@hardwarefreak.com
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Fri, 18 May 2012 18:28:05 -0500, Stan Hoeppner wrote: On 5/18/2012 4:55 PM, Ramon Hofer wrote: I installed squeeze amd64 yesterday on a raid1 (just to try). You need to explain this in detail: installed on raid1 Installed onto what raid1? Does this mean you created an mdadm raid1 pair during the Squeeze installation process, and installed to that? To what SAS/SATA controller are these two disks attached? Please provide as much detail as possible about this controller chip and if it is on the motherboard. If so, please provide the motherboard brand/model. Sorry I try to give you some more details. But to be honest I'm just an interested consumer ;-) What I want to say is that probably I just don't know how to get the information. Like I can't get to the syslog when the system doesn't boot. But I hope with your help I can learn about ways on how to get to the information :-) I installed Squeeze AMD64 Netinstall to a raid1 with the disks directly attached to the mainboard. During installation I partitioned the disks, set the filesystem to raid and created md raids during the installation then chose the md raids to be mounted as /boot, swap, /, /var, /usr, /tmp and /home. This was just done because of curiosity. Now the same system partitions are directly on one of the disks. It is still attached directly to the mainboard The mainboard is a Supermicro C7P67 with a Marvel 88SE91xx adapter onboard. Then I installed squeeze with the card present without problems but booting afterwards didn't work again. Detail, detail detail! To what did you install Squeeze? Which disks, attached to which controller? We *NEED* these details to assist you. The system was installed to a disk directly attached to the mainboard. I thought it might be a good idea anyway to use the SATA ports on the mainboard for the os disk. Without the card installed bpo amd64 kernel but couldn't boot again. If you installed to disks attached to the expander/9240 and then yanked the card, of course it wouldn't boot. Again, this is why we need *details*. ALWAYS supply the details! No, sorry for all the misunderstanding. Even if I only have the os disks (attached to the mainboard), the lsi card and the expander (both mounted on pci-e x16 ports on the mainboard) the system hangs on after the first three messages (megasas: INIT adapter done and the two over-current messages). And when I remove the LSI card only I see the over-current messages and the system boot just fine. As well when I remove the expander as well I see the over-current messages and the system boots fine. Without the LSI card there are no problems (except the over-current message which is also present with only the mb and a disk). Installation works ok with and without card. Ok, so the USB over-current error has nothing to do with the hang during boot. Yes, this is what I think as well but didn't want to keep quiet about that. Nevertheless I think the module for the card should be loaded but then it somehow hangs. Only full dmesg output will tell us this. Yes. Unfortunately I don't know how to get the output when I can't login. Oh ok, now I have removed the card again and found some interesting logs. /var/log/syslog: http://pastebin.com/raw.php?i=00rN1X8s /var/log/installer/syslog: http://pastebin.com/raw.php?i=sDmjbeey /var/log/installer/hardware-summary: http://pastebin.com/raw.php?i=V8fX4F0W Ok. But I have no clue either how to find this out. Maybe you could point into the right direction :-) Again, do not flash the HBA firmware at this point. Provide the details I requested and we'll move forward from there. It may very well be that the RAID firmware is causing the boot problem and you need the straight JBOD firmware, but lets get all the other details first so we can determine that instead of making wild guesses. BTW, did you disable all boot related options in the 9240 BIOS and force it to JBOD mode? Did you read the instructions in their entirety before mounting the HBA into the machine? This isn't a $20 SATA card you simply slap in and go. It's an SAS RAID controller. More care/learning is required. To be honest I have never worked with anything else than the usual consumer products. So the most of the terms I don't understand. But I will work harder I read how to disable these options. What I saw is that it sets the disks connected to the expander to jbod mode. And I disbled the cards BIOS completely but with no luck. I hope this helps a bit but please be gentle with a hobbyist :-) Best regards Ramon -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7pi1$iik$1...@dough.gmane.org
Re: Wheezy: aptitude update fails
--- On Sat, 5/19/12, Camaleón noela...@gmail.com wrote: Weird... I'm also using wheezy and haven't experienced any problem though I use apt-get update apt-get -V dist-upgrade to update the system. Are you (or your ISP) behind some kind of proxy? Not that I know of. Besides, I can access the following URLs from the browser without any problems: http://ftp.us.debian.org/debian/dists/wheezy/main/ http://ftp.us.debian.org/debian/dists/wheezy/non-free/ It's beginning to look like an aptitude problem to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1337420336.92200.yahoomailclas...@web121901.mail.ne1.yahoo.com
problem with power button
I install squeeze, the power button on front panel of PC works I can shutdown squeeze by pressing button but later it doesn't work, I'm not sure of the cause maybe it's caused by removing/reinstalling kernel that is, I remove the default kernel to install kernel 2.4 kernel 2.4 doesn't look OK, so I install kernel 2.6.32-5-686 every thing else works fine, except power button I have to enter shutdown -h now Can you help me? or I have to reinstall squeeze -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cab-gxzbdhdvqqfacc0hz-vvqpr-bskmey1lcf4qwbtuuc7h...@mail.gmail.com
Re: problem with power button
On Sb, 19 mai 12, 06:13:14, Long Wind wrote: I install squeeze, the power button on front panel of PC works I can shutdown squeeze by pressing button but later it doesn't work, I'm not sure of the cause maybe it's caused by removing/reinstalling kernel that is, I remove the default kernel to install kernel 2.4 kernel 2.4 doesn't look OK, so I install kernel 2.6.32-5-686 every thing else works fine, except power button I have to enter shutdown -h now AFAIR the power button is generating some ACPI events, which are then interpreted by software to trigger some action (e.g. shutdown -h now). While experimenting with 2.4 did you: - uninstall packages? (check apt/aptitude/dpkg logs) - change BIOS options? - ... Just booting with another kernel (even if 2.4) should not trigger such permanent changes unless files were corrupted (fsck ok?) or you damaged your hardware (highly unlikely), but you might want to try completely unplugging your computer. Hope this helps, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Fri, 18 May 2012 17:47:54 -0500, Stan Hoeppner wrote: On 5/18/2012 9:23 AM, Ramon Hofer wrote: Hi all I finally got my LSI 9240-4i and the Intel SAS expander. Unfortunately it prevents the system from booting. I only got this message on the screen: megasas: INIT adapter done hub 4-1:1.0 over-current condition on port 7 hub 4-1:1.0 over-current condition on port 8 These over-current errors are reported by USB, not megasas. Unplug all of your USB devices until you get everything else running. Even when I plug out the chassis usb connector and only have the onboard usb connectors from the mainboard without connected anything to it the message remains. This is the device 1 on bus 4 right? So it should be ID 1d6b:0002 Linux Foundation 2.0 root hub Bus? I also got the over-current messages when the LSI card is removed. Here's the output of lsusb: Bus 004 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Again, this is because the over-current issue has nothing to with the HBA, but the USB subsystem. Yes this might have nothing to do with the problem. But I still wanted to mention it because I didn't know if it's related or not. Or if I should worry about it. Mainboards somethimes say strange things :-) On my htpc I always have the message cpu fan error probably because I have a big passive cooler and use the chassis fans to cool them. And this was no problems so far too. Nevertheless I think the module for the card should be loaded but then it somehow hangs. You're assuming it's the HBA/module hanging the system. I see no evidence of that so far. I came to that conclusion because when the card is mounted to system stops during booting. When the card is remove the system boots. There's this over-current problem that could cause something. And maybe the pci-e slots have to do something with it. But I have plugged the lsi card to both pci-e x16 slots on the mainboard but both times the system didn't boot. And the expander only uses the slot to draw it's power. And I tried to switch the LSI bios off. These are the things I tried to isolate the problem but unfortunately I don't have any other ideas. I will now thoroughly study the lsi documentary... And after a while there are more messages which I don't understand. I have taken a picture: http://666kb.com/i/c3wf606sc1qkcvgoc.jpg It shows that udev is having serious trouble handling one of the USB devices. Yes but only when the lsi card is attached. When it's removed the messages don't appear. And I don't even have anything connected to the usb ports. Really confusing... I thought I had the same messages with the Supermicro AOC-SASLP-MV8 cards :-? But when I switched to the bpo amd64 kernel it _seemed_ ok. This is why I hoped with the megaraid module it would be the same. Btw just left of the Ext. LED connector there's the CR1 LED constantly (from the moment the system is powered) blinking with a 1 sec on / 1 sec off period. I couldn't find the meaning of this LED in the LSI documents. But to be honest I didn't read through the 500 page manual. Which I will do now :-) Then there are lots of messages like this: INFO: task modprobe:123 blocked for more than 120 seconds. echo 0... disables this message Instead of modprobe:123 also modprobe:124, 125, 126, 127, 135, 137 and kworker/u:1:164, 165 are listed. Posting log snippets like this is totally useless. Please post your entire dmesg output to pastebin and provide the link. I didn't have the idea yesterday that I could use the files under /var/ log. I was only missing the possibility to type dmesg in a terminal when the error occurs. But I have posted some logs in my previous post. I hope these help more. I can enter the BIOS of the card just fine. It detect the disks and by defaults sets jbod option for them. This is fine because I want to use linux RAID. Sure, because the card and expander are working properly. Yes, now I only have to convice the os to accept this :-) May this problem be the same: http://www.spinics.net/lists/raid/msg30359.html Should I try a firmware upgrade? Your hang problem seems unrelated to the HBA. Exhaust all other possibilities before attempting a firmware upgrade. If there is some other system level problem, it could botch the FW upgrade and brick the card, leaving you in a far worse situation than you are now. Post your FW version here. It's likely pretty recent already. The FW version is 2.70.04-0862. I have a little confusion with the versioning
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Sat, 19 May 2012 04:19:33 -0500, Stan Hoeppner wrote: On 5/19/2012 2:52 AM, Ramon Hofer wrote: On Fri, 18 May 2012 17:57:56 -0500, Stan Hoeppner wrote: On 5/18/2012 9:39 AM, Shane Johnson wrote: After that I would look to see if something isn't shorting out a USB port. Yes, USB is the cause of the over-current errors, which is plainly evident in his screen shot. But we don't yet know if this USB problem is what's hanging the system. Further troubleshooting is required. The strange thing is as I mentioned in another post is that on the mb usb port 8 there's nothing attached and I haven't found where port 7 is :-? I wouldn't worry about the USB errors at this point. Unless there is some larger issue with insufficient power on the motherboard causing the USB current error, it's likely unrelated to the storage hardware issue. Fix it first, then worry about the USB errors. Given you have no device plugged into those ports, it could be a phantom error. Yes I hope you're right with the phantom error :-) Especially because I can't find port 7. No label on the mb pcb nor in it's documentation. Best regards Ramon -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7t1k$iik$3...@dough.gmane.org
Re: Wheezy: aptitude update fails
On Sat, 19 May 2012 02:38:56 -0700, T Elcor wrote: --- On Sat, 5/19/12, Camaleón noela...@gmail.com wrote: Weird... I'm also using wheezy and haven't experienced any problem though I use apt-get update apt-get -V dist-upgrade to update the system. Are you (or your ISP) behind some kind of proxy? Not that I know of. Besides, I can access the following URLs from the browser without any problems: http://ftp.us.debian.org/debian/dists/wheezy/main/ http://ftp.us.debian.org/debian/dists/wheezy/non-free/ Oh, of course the file is there and accesible via browser, but that tells you little because you are connected to a dynamic mirror, it redirects you to a different server every time: sm01@stt008:~$ host ftp.us.debian.org ftp.us.debian.org has address 128.61.240.89 ftp.us.debian.org has address 199.6.12.70 ftp.us.debian.org has address 35.9.37.225 ftp.us.debian.org has address 64.50.233.100 ftp.us.debian.org has address 64.50.236.52 ftp.us.debian.org has address 128.30.2.36 ftp.us.debian.org has IPv6 address 2610:148:1f10:3::89 ftp.us.debian.org has IPv6 address 2001:500:61:28::70 Okay, you can try with a different mirror. Edit your sources.list file and keep only this line (comment out # the rest): deb http://ftp.de.debian.org/debian/ wheezy main non-free Then jump to a console and run: apt-get update apt-get -V dist-upgrade And put here the output. It's beginning to look like an aptitude problem to me. That would make sense if apt-get worked. If apt-get fails in the same way, you're stuck at the same unknown point :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7ugm$27j$1...@dough.gmane.org
Re: problem with power button
On Sat, 19 May 2012 06:13:14 -0400, Long Wind wrote: I install squeeze, the power button on front panel of PC works I can shutdown squeeze by pressing button but later it doesn't work, I'm not sure of the cause maybe it's caused by removing/reinstalling kernel that is, I remove the default kernel to install kernel 2.4 kernel 2.4 doesn't look OK, so I install kernel 2.6.32-5-686 every thing else works fine, except power button I have to enter shutdown -h now - So you installed squeeze → it worked - Then you installed an old kernel (you self-compiled it?) → nothing worked (that's normal...) - Then you reinstalled squeeze's stock kernel but the power button is still not working Can you help me? or I have to reinstall squeeze Check whether the associated event has been registered correctly: dmesg | grep -i power Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp7vce$27j$1...@dough.gmane.org
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Sat, 19 May 2012 09:09:52 +, Camaleón wrote: On Fri, 18 May 2012 21:55:36 +, Ramon Hofer wrote: On Fri, 18 May 2012 20:18:46 +, Camaleón wrote: Are you running Squeeze? Yes, sorry forgot to mention. I installed squeeze amd64 yesterday on a raid1 (just to try). Today when the card was here I put it in and couldn't boot. Then I installed squeeze with the card present without problems but booting afterwards didn't work again. Without the card installed bpo amd64 kernel but couldn't boot again. You have to be extremely precise while describing the situation because there are missing pieces in the above stanza and the whole steps you followed :-) Ok, sorry for that! I try to improve :-) Okay, let's start over. You installed the lsi card in one of the motherboard slots, configured the BIOS to use a JBOD disk layout and then boot the installation CD for Squeeze, right? Yes, but I didn't set the LSI BIOS to use the cards as jbod it did it automatically. In the cards BIOS I saw that virtual drives can be setup. But since I want to use them as jbod I don't think I have to set virtual drives. The Controller Property pages are very hard to understand. So I tried with the factory default. The installation proccess was smoothly (you selected a mdadm configuration for the disks and then formatted them with no problems), when the installer finished and the system first rebooted, you selected the new installed system from GRUB2's menu and then, the booting proccess halted displaying the mentioned messages in the screen, right? Exactly. I only saw the three messages (megasas: INIT adapter done and the over- currents) for some time. Then the screen was filled with the timeout and udev messages. And you installed the system with no glitches and then it hangs? Without the LSI card there are no problems (except the over-current message which is also present with only the mb and a disk). Installation works ok with and without card. So you think the system stalls because of the raid card despite you get the same output messages at boot and there's no additional evidence of a problem related to the hard disks or the controller. I only get the two over current lines always. The timeout and udev errors don't appear when the card is removed. Mmm... weird it is, my young padawan :-) that's for sure but it can be something coming from your Supermicro motherboard's BIOS and the raid controller. Check if there's a BIOS update for your motherboard (but just check, don't install!) and if so, ask Supermicro technical support about the exact problems it corrects and tell them you are using a LSI raid card and you're having problems to boot your system from it. Thanks Master Camaleón :-D The mb BIOS version is 2.10.1206. But I couldn't find the current version. They only write R 2.0. And the readmes in the firmware zip don't tell me more. I will email Supermicro to ask them. What's the point for listing the USB devices? :-? Because I thought I should mention the over-current message and it's related to usb. But I think it's a completely different thing. And I don't even know where port 7 is but port 8 is definitely empty :-? Yes, I agree. It seems an unrelated problem that you can try to solve once you correct the booting issue if the error still persists. Will do that :-) Something wrong with udevd when listing an usb?? device or hub. Ok, unfortunately I have no clue what this means. But this message isn't there without card but it's pci-e? Ah, that's a very interesting discovery, man. To me it can mean the motherboard is not correctly detecting the card, hence a BIOS issue. Ah yes, maybe it thinks it's a usb device? I have tried to check if I can see something in the mb BIOS to see if it can tell me anything about the connected hardware. But I didn't find anything in the PCI settings. (...) Mmm... the strange here is that there is no clear indication about the nature of the problem, that is, what's preventing your system from booting. Can you at least get into the single-user mode? I can't get to any login. Or is there a way to get into single-user mode? If you mean recovery mode: no luck either :-( Are you reaching the GRUB2 menu? If yes, you can select recovery mode/ single-user mode. Ah ok. Yes I have tried that with both kernels in recovery mode but without luck. There are alot more messages with the last two of them the over-current messages :-o Best regards Ramon -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp800h$sd8$1...@dough.gmane.org
Re: Wheezy: aptitude update fails
--- On Sat, 5/19/12, Camaleón noela...@gmail.com wrote: Okay, you can try with a different mirror. Edit your sources.list file and keep only this line (comment out # the rest): deb http://ftp.de.debian.org/debian/ wheezy main non-free Then jump to a console and run: apt-get update apt-get -V dist-upgrade And put here the output. Here it is: # apt-get update Hit http://security.debian.org wheezy/updates InRelease Ign http://security.debian.org wheezy/updates/main TranslationIndex Err http://security.debian.org wheezy/updates/main amd64 Packages 404 Not Found [IP: 128.31.0.36 80] Ign http://security.debian.org wheezy/updates/main Translation-en_US Ign http://security.debian.org wheezy/updates/main Translation-en Hit http://ftp.de.debian.org wheezy InRelease Get:1 http://ftp.de.debian.org wheezy/main amd64 Packages/DiffIndex [7,876 B] Get:2 http://ftp.de.debian.org wheezy/main TranslationIndex [2,295 B] Ign http://ftp.de.debian.org wheezy/non-free TranslationIndex Get:3 http://ftp.de.debian.org wheezy/non-free amd64 Packages [90.9 kB] Ign http://ftp.de.debian.org wheezy/main Translation-en Ign http://ftp.de.debian.org wheezy/non-free Translation-en_US Ign http://ftp.de.debian.org wheezy/non-free Translation-en Fetched 10.2 kB in 2s (4,211 B/s) W: Failed to fetch http://security.debian.org/dists/wheezy/updates/main/binary-amd64/Packages 404 Not Found [IP: 128.31.0.36 80] W: Failed to fetch gzip:/var/lib/apt/lists/partial/ftp.de.debian.org_debian_dists_wheezy_non-free_binary-amd64_Packages Hash Sum mismatch E: Some index files failed to download. They have been ignored, or old ones used instead. # cat /etc/apt/sources.list deb http://ftp.de.debian.org/debian/ wheezy main deb http://ftp.de.debian.org/debian/ wheezy non-free deb http://security.debian.org/ wheezy/updates main -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1337426827.74136.yahoomailclas...@web121901.mail.ne1.yahoo.com
Re: problem with power button
Thank Camaleón! dmesg | grep -i power [0.148304] ACPI: Power Resource [URP1] (off) [0.148367] ACPI: Power Resource [URP2] (off) [0.148426] ACPI: Power Resource [FDDP] (off) [0.148485] ACPI: Power Resource [LPTP] (off) [7.837926] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [7.837945] ACPI: Power Button [PWRB] [7.838267] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [7.838276] ACPI: Power Button [PWRF] -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAB-gxZD=wGWCibEexk_5s5i2CY98AO-HZiTvha5Fh7Bp-6=p...@mail.gmail.com
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Sat, 19 May 2012 10:33:06 +, Ramon Hofer wrote: On Fri, 18 May 2012 17:47:54 -0500, Stan Hoeppner wrote: Post your FW version here. It's likely pretty recent already. The FW version is 2.70.04-0862. I have a little confusion with the versioning from LSI. On their homepage [1] they list the firmware name 4.6 - 10M09 P24 as the newest. The filename of this file is 20.10.1-0077_SAS_2008_FW_Image_APP-2.120.244-1482.zip. The starting number 20.10.1-0777 is the newest version according to the readme. The filename ends with 2.120.244-1482 which seems more in the format the version listed in my cards BIOS. [1] http://www.lsi.com/downloads/Public/MegaRAID%20Common% 20Files/20.10.1-0077_SAS_2008_FW_Image_APP-2.120.244-1482.zip When I start the system the card shows it's version before it start detecting the disks. It's 4.14.00 and the date it shows is 29.1.2010. So it seems a bit old? Best regards Ramon -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8080$sd8$2...@dough.gmane.org
Re: problem with power button
Thank Andrei POPESCU! I install kernel 2.4 with apt-get install ... the package conflicts with other package(s) so other package(s) have to be removed then I install kernel 2.6 with apt-get install ..., the command remove some packages and install some packages -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAB-gxZDXQUdmp=nfvbvkfiigtwz8d_9e+a1ivwjn9ypkigs...@mail.gmail.com
Re: Wheezy: aptitude update fails
On Sat, 19 May 2012 04:27:07 -0700, T Elcor wrote: (...) And put here the output. Here it is: # apt-get update (...) Hit http://ftp.de.debian.org wheezy InRelease Get:1 http://ftp.de.debian.org wheezy/main amd64 Packages/DiffIndex [7,876 B] Get:2 http://ftp.de.debian.org wheezy/main TranslationIndex [2,295 B] Ign http://ftp.de.debian.org wheezy/non-free TranslationIndex Get:3 http://ftp.de.debian.org wheezy/non-free amd64 Packages [90.9 kB] Ign http://ftp.de.debian.org wheezy/main Translation-en Ign http://ftp.de.debian.org wheezy/non-free Translation-en_US Ign http://ftp.de.debian.org wheezy/non-free Translation-en Fetched 10.2 kB in 2s (4,211 B/s) (...) Okay, much better now :-) security still fails because you did not commented out... W: Failed to fetch gzip:/var/lib/apt/lists/partial/ftp.de.debian.org_debian_dists_wheezy_non-free_binary-amd64_Packages Hash Sum mismatch E: Some index files failed to download. They have been ignored, or old ones used instead. Clean your local apt cache: apt-get clean # cat /etc/apt/sources.list deb http://ftp.de.debian.org/debian/ wheezy main deb http://ftp.de.debian.org/debian/ wheezy non-free deb http://security.debian.org/ wheezy/updates main Then, put these two lines *as is* in your sources.list: deb http://ftp.de.debian.org/debian/ wheezy main contrib non-free #deb http://security.debian.org/ wheezy/updates main Finally, refresh your repo cache (apt-get update) and resend the output. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp81d9$27j$1...@dough.gmane.org
Re: problem with power button
On Sat, 19 May 2012 07:29:04 -0400, Long Wind wrote: Thank Camaleón! dmesg | grep -i power (...) [7.837926] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [7.837945] ACPI: Power Button [PWRB] (...) Looks right, there it is. What happens when you press the power button? Nothing? Also, is the machine fully up and running when you press the button or has it returned from hibernation/suspension? Ensure you have an updated system and if you are curious enough, there's a litte program you can install (kacpimon) to monitor the acpi events. It will tell you what's going on when you press the power button. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp829s$27j$1...@dough.gmane.org
Re: problem with power button
On 5/19/12, Camaleón noela...@gmail.com wrote: Looks right, there it is. What happens when you press the power button? Nothing? Also, is the machine fully up and running when you press the button or has it returned from hibernation/suspension? Ensure you have an updated system and if you are curious enough, there's a litte program you can install (kacpimon) to monitor the acpi events. It will tell you what's going on when you press the power button. Greetings, -- Camaleón Nothing seems to happen when I press power button I install kacpimon, pressing power button or moving mouse can cause it to print some msg I'd better reinstall squeeze. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cab-gxzbn3flbz3-n5uftodaro2aot8p5nwmglmw22tdast_...@mail.gmail.com
Re: problem with power button
On Sat, 19 May 2012 08:35:01 -0400, Long Wind wrote: On 5/19/12, Camaleón noela...@gmail.com wrote: Looks right, there it is. What happens when you press the power button? Nothing? Also, is the machine fully up and running when you press the button or has it returned from hibernation/suspension? Ensure you have an updated system and if you are curious enough, there's a litte program you can install (kacpimon) to monitor the acpi events. It will tell you what's going on when you press the power button. Nothing seems to happen when I press power button I install kacpimon, pressing power button or moving mouse can cause it to print some msg What messages, what's the output? I'd better reinstall squeeze. You seem to enjoy reinstalling linux distributions every day :-) but before doing do, ensure you have these packages installed: acpi acpi-support acpi-support-base acpid Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp85gs$27j$1...@dough.gmane.org
(solved)Re: problem with power button
On 5/19/12, Camaleón noela...@gmail.com wrote: You seem to enjoy reinstalling linux distributions every day :-) but before doing do, ensure you have these packages installed: acpi acpi-support acpi-support-base acpid Greetings, Thank Camaleón! You finally hit the point During installing 2.4 and reinstalling 2.6, acpid is removed I install acpid and power button works now -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cab-gxzau86d_h+rrxdp6krjrzqezjgxtozcrw-oo3cgdn4b...@mail.gmail.com
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Sat, 19 May 2012 11:26:09 +, Ramon Hofer wrote: On Sat, 19 May 2012 09:09:52 +, Camaleón wrote: You installed the lsi card in one of the motherboard slots, configured the BIOS to use a JBOD disk layout and then boot the installation CD for Squeeze, right? Yes, but I didn't set the LSI BIOS to use the cards as jbod it did it automatically. I guess that's the default. In the cards BIOS I saw that virtual drives can be setup. But since I want to use them as jbod I don't think I have to set virtual drives. The Controller Property pages are very hard to understand. So I tried with the factory default. It's important that you first read and get a global understanding about the capabilities (and possibilities) of your card. A raid card is almost a small computer by itself (it has the logic and the wires to act as such), they're a very complex piece of hardware. Moreover, the raid card has to stablish a perfect dialog with your motherboard and the rest of the system components (OS, hard disks...), and every single item in this chain (a BIOS problem, firmware glitch) can fail or make the computer behave weirdly. So you think the system stalls because of the raid card despite you get the same output messages at boot and there's no additional evidence of a problem related to the hard disks or the controller. I only get the two over current lines always. The timeout and udev errors don't appear when the card is removed. Okay. Mmm... weird it is, my young padawan :-) that's for sure but it can be something coming from your Supermicro motherboard's BIOS and the raid controller. Check if there's a BIOS update for your motherboard (but just check, don't install!) and if so, ask Supermicro technical support about the exact problems it corrects and tell them you are using a LSI raid card and you're having problems to boot your system from it. Thanks Master Camaleón :-D The mb BIOS version is 2.10.1206. But I couldn't find the current version. They only write R 2.0. And the readmes in the firmware zip don't tell me more. I will email Supermicro to ask them. Yes, do it ASAP. Look, Supermicro is somehow special in this regard. They have top-quality motherboards which allows special configuration and setups and thus they work very closely with the rest of the hardware manufacturers (memory modules, HBA providers...). Should there's any specific problem with your raid card and any of their boards they'll tell the steps to follow. Something wrong with udevd when listing an usb?? device or hub. Ok, unfortunately I have no clue what this means. But this message isn't there without card but it's pci-e? Ah, that's a very interesting discovery, man. To me it can mean the motherboard is not correctly detecting the card, hence a BIOS issue. Ah yes, maybe it thinks it's a usb device? Yes, sort of. It could be that the motherboard is having problems to address some resources provided by your raid card. I have tried to check if I can see something in the mb BIOS to see if it can tell me anything about the connected hardware. But I didn't find anything in the PCI settings. Mmm, have you tried to set a RAID level instead using JBOD? It's just for testing... although this can only be done in a very early stage when the disks are completely empty with no data on them because I'm afraid changing this will destroy whatever contains. Are you reaching the GRUB2 menu? If yes, you can select recovery mode/ single-user mode. Ah ok. Yes I have tried that with both kernels in recovery mode but without luck. There are alot more messages with the last two of them the over-current messages :-o If you could upload an image with the screen you get, it would be great :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp87ud$27j$1...@dough.gmane.org
Re: need help on using ffmpeg for video grab
On Sat, 19 May 2012 05:51:51 +1200, Chris Bannister wrote: On Wed, May 16, 2012 at 12:59:52AM -0400, Long Wind wrote: I have bt848 card and watch TV with xawtv As another application shows: Device 00: BT848A video (Lifeview FlyVideo /dev/video0) Port 00: Television Port 01: Composite1 Port 02: S-Video Port 03: Composite3 I select Composite1 in xawtv I try ffmpeg with this command: ffmpeg -s vga -f video4linux2 -i /dev/video0 t2.mpg then I ffplay t2.mpg, it shows green screen maybe I didn't specify Composite1 in ffmpeg command, but how to do that? or maybe I didn't specify PAL, but how to do that? FFmpeg is very powerful but you have to carefully read the docs and search for command line samples when something goes wrong, e.g.: http://ffmpeg.org/ffmpeg.html#Examples From there it can be read: (...) Note that you must activate the right video source and channel before launching ffmpeg with any TV viewer such as xawtv by Gerd Knorr. You also have to set the audio recording levels correctly with a standard mixer. Maybe is that you missed the -channel argument? Anyway, you can also consider in using a different application such as VideoLAN which is simpler to use and can also grab the video from the TV card. Wrong list! Please direct your question to a ffmpeg users list. I don't think so. It could be somehow [OT] but this list is okay for that kind of questions. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8cgq$27j$1...@dough.gmane.org
Changes In udev?
In /dev cdrom4, cdrw4, dvd4 and dvdrw4 all point to sr1 and cdrom6, cdrw6, dvd6 and dvdrw6 all point to sr0 I just replaced a dying motherboard - the ethernet circuit failed - and on boot up found the above soft links. Perhaps this was changed in a recent dist-upgrade and I only now noticed the changes. Either way my /dev/fstab file was out of date as it contained entries like /dev/sca1 /media/cdrom1 udf,iso9660 user,noauto 0 0 so my dvdrw drives were not found. In trying to identify the problem I found /dev/disk/by-name reported the name of the cd in the drive. /dev/bus contains a usb directory. Previously there was a directory in /dev which would list the hard drives in a directory by-uuid but I can't find this anymore. Having found all this I have made changes in /etc/fstab and cdplay -d /dev/sr0 will play a cd but there is no sound. The sound system works, an online video with sound plays perfectly. Question: What are the best practice /etc/fstab entries given the changes in /dev? Tom -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519150402.ga9...@tomgeorge.info
Re: Wheezy: aptitude update fails
--- On Sat, 5/19/12, Camaleón noela...@gmail.com wrote: security still fails because you did not commented out... In theory, security may fail because there are no security updates for wheezy yet, in practice that line was working fine for months without any problems until several days ago. Clean your local apt cache: apt-get clean # cat /etc/apt/sources.list deb http://ftp.de.debian.org/debian/ wheezy main deb http://ftp.de.debian.org/debian/ wheezy non-free deb http://security.debian.org/ wheezy/updates main Then, put these two lines *as is* in your sources.list: deb http://ftp.de.debian.org/debian/ wheezy main contrib non-free #deb http://security.debian.org/ wheezy/updates main Finally, refresh your repo cache (apt-get update) and resend the output. # apt-get clean # apt-get update Hit http://ftp.de.debian.org wheezy InRelease Hit http://ftp.de.debian.org wheezy/main amd64 Packages/DiffIndex Get:1 http://ftp.de.debian.org wheezy/contrib amd64 Packages/DiffIndex [6,991 B] Ign http://ftp.de.debian.org wheezy/contrib TranslationIndex Hit http://ftp.de.debian.org wheezy/main TranslationIndex Ign http://ftp.de.debian.org wheezy/non-free TranslationIndex Get:2 http://ftp.de.debian.org wheezy/non-free amd64 Packages [90.9 kB] Ign http://ftp.de.debian.org wheezy/contrib Translation-en_US Ign http://ftp.de.debian.org wheezy/contrib Translation-en Ign http://ftp.de.debian.org wheezy/main Translation-en Ign http://ftp.de.debian.org wheezy/non-free Translation-en_US Ign http://ftp.de.debian.org wheezy/non-free Translation-en Fetched 6,992 B in 1s (3,569 B/s) W: Failed to fetch gzip:/var/lib/apt/lists/partial/ftp.de.debian.org_debian_dists_wheezy_non-free_binary-amd64_Packages Hash Sum mismatch E: Some index files failed to download. They have been ignored, or old ones used instead. # cat /etc/apt/sources.list deb http://ftp.de.debian.org/debian/ wheezy main contrib non-free -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1337441595.73667.yahoomailclas...@web121906.mail.ne1.yahoo.com
Re: Changes In udev?
On Sat, 19 May 2012 11:04:02 -0400, Thomas H. George wrote: In /dev cdrom4, cdrw4, dvd4 and dvdrw4 all point to sr1 and cdrom6, cdrw6, dvd6 and dvdrw6 all point to sr0 I just replaced a dying motherboard - the ethernet circuit failed - and on boot up found the above soft links. Perhaps this was changed in a recent dist-upgrade and I only now noticed the changes. Either way my /dev/fstab file was out of date as it contained entries like /dev/sca1 /media/cdrom1 udf,iso9660 user,noauto 0 0 so my dvdrw drives were not found. Are you running squeeze, wheehy, sid? How many optical devices do you have, two (CD → sr1 and DVD → sr0)? You can run dmesg | grep sr and send the output. (...) Question: What are the best practice /etc/fstab entries given the changes in /dev? You can try with: /dev/cdrom /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/dvd /media/dvd0 udf,iso9660 user,noauto 0 0 Note that /dev/cdrom and /dev/dvd are the names udev gives to your devices based on the content of /etc/udev/rules.d/70-persistent- cdrom.rules file. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8ek1$27j$1...@dough.gmane.org
Re: Wheezy: aptitude update fails
On Sat, 19 May 2012 08:33:15 -0700, T Elcor wrote: --- On Sat, 5/19/12, Camaleón noela...@gmail.com wrote: security still fails because you did not commented out... In theory, security may fail because there are no security updates for wheezy yet, in practice that line was working fine for months without any problems until several days ago. Not at all, I also use wheezy and the security repo is working as it should. It is something failing at your side :-) Clean your local apt cache: (...) Then, put these two lines *as is* in your sources.list: (...) Finally, refresh your repo cache (apt-get update) and resend the output. # apt-get clean # apt-get update (...) W: Failed to fetch gzip:/var/lib/apt/lists/partial/ftp.de.debian.org_debian_dists_wheezy_non-free_binary-amd64_Packages Hash Sum mismatch E: Some index files failed to download. They have been ignored, or old ones used instead. I'm starting to think you are facing a pure connectivity problem. Can you use a different ISP/gateway? # cat /etc/apt/sources.list deb http://ftp.de.debian.org/debian/ wheezy main contrib non-free Any specific reason for not doing what I tell? ;-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8fkb$27j$1...@dough.gmane.org
Re: Wheezy: aptitude update fails
All of this makes me mad... # cat /etc/apt/sources.list deb http://ftp.fr.debian.org/debian/ wheezy main deb-src http://ftp.fr.debian.org/debian/ wheezy main deb http://security.debian.org/ wheezy/updates main deb-src http://security.debian.org/ wheezy/updates main # sudo aptitude update Hit http://ftp.fr.debian.org wheezy InRelease Hit http://security.debian.org wheezy/updates InRelease Hit http://ftp.fr.debian.org wheezy/main Sources/DiffIndex Hit http://ftp.fr.debian.org wheezy/main i386 Packages/DiffIndex Hit http://ftp.fr.debian.org wheezy/main Translation-fr/DiffIndex Prendre : 1 http://ftp.fr.debian.org wheezy/main Translation-en [3 834 kB] Hit http://security.debian.org wheezy/updates/main Sources Hit http://security.debian.org wheezy/updates/main i386 Packages Ign http://security.debian.org wheezy/updates/main Translation-fr_FR Ign http://security.debian.org wheezy/updates/main Translation-fr Ign http://security.debian.org wheezy/updates/main Translation-en 1 o téléchargés en 6s (0 o/s) W: Failed to fetch bzip2:/var/lib/apt/lists/partial/ftp.fr.debian.org_debian_dists_wheezy_main_i18n_Translation-en: Somme de contrôle de hachage incohérente E: Some index files failed to download. They have been ignored, or old ones used instead. E: Impossible de reconstruire le cache des paquets Try with a one-line file: # cat /etc/apt/sources.list deb http://ftp.fr.debian.org/debian/ wheezy main # sudo aptitude clean sudo aptitude update Hit http://ftp.fr.debian.org wheezy InRelease Hit http://ftp.fr.debian.org wheezy/main i386 Packages/DiffIndex Hit http://ftp.fr.debian.org wheezy/main Translation-fr/DiffIndex Prendre : 1 http://ftp.fr.debian.org wheezy/main Translation-en [3 834 kB] 1 o téléchargés en 5s (0 o/s) W: Failed to fetch bzip2:/var/lib/apt/lists/partial/ftp.fr.debian.org_debian_dists_wheezy_main_i18n_Translation-en: Somme de contrôle de hachage incohérente E: Some index files failed to download. They have been ignored, or old ones used instead. E: Impossible de reconstruire le cache des paquets Then try with another location: # cat /etc/apt/sources.list deb http://ftp.debian.org/debian/ wheezy main # sudo aptitude clean sudo aptitude update Prendre : 1 http://ftp.debian.org wheezy InRelease [190 kB] Prendre : 2 http://ftp.debian.org wheezy/main i386 Packages [5 793 kB] Prendre : 3 http://ftp.debian.org wheezy/main Translation-fr [699 kB] Prendre : 4 http://ftp.debian.org wheezy/main Translation-en [3 834 kB] 10,5 Mo téléchargés en 12s (810 ko/s) État actuel : 39 mises à jour restantes [+39], 1308 nouveaux paquets [+1286]. Re-try with the original one-line file: # cat /etc/apt/sources.list deb http://ftp.debian.org/debian/ wheezy main # sudo aptitude clean sudo aptitude update Prendre : 1 http://ftp.fr.debian.org wheezy InRelease [190 kB] Prendre : 2 http://ftp.fr.debian.org wheezy/main i386 Packages [5 796 kB] Prendre : 3 http://ftp.fr.debian.org wheezy/main Translation-fr [699 kB] Prendre : 4 http://ftp.fr.debian.org wheezy/main Translation-en [3 834 kB] 10,5 Mo téléchargés en 11s (885 ko/s) W: Failed to fetch bzip2:/var/lib/apt/lists/partial/ftp.fr.debian.org_debian_dists_wheezy_main_i18n_Translation-en: Somme de contrôle de hachage incohérente E: Some index files failed to download. They have been ignored, or old ones used instead. E: Impossible de reconstruire le cache des paquets État actuel : 2 mises à jour restantes [+2], 1308 nouveaux paquets [+1286]. Best regards, Antoine -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1337441914.4fb7be7a9e...@imp.free.fr
Re: Wheezy: aptitude update fails
On Sat, 19 May 2012 17:38:34 +0200, antoinejou wrote: All of this makes me mad... (...) W: Failed to fetch bzip2:/var/lib/apt/lists/partial/ftp.fr.debian.org_debian_dists_wheezy_main_i18n_Translation-en: Somme de contrôle de hachage incohérente E: Some index files failed to download. They have been ignored, or old ones used instead. E: Impossible de reconstruire le cache des paquets (...) Okay, okay... I'm also getting the same hash mismatch error _now_. There must be something changing at the servers, we'll have to wait. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8g8v$27j$2...@dough.gmane.org
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Sat, 19 May 2012, Ramon Hofer wrote: And after a while there are more messages which I don't understand. I have taken a picture: http://666kb.com/i/c3wf606sc1qkcvgoc.jpg It shows that udev is having serious trouble handling one of the USB devices. Yes but only when the lsi card is attached. When it's removed the Get a better PSU, and if that doesn't work, either junk the motherboard, or give up on adding any cards that require a bit more power. -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519160510.ga22...@khazad-dum.debian.net
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On Sat, 19 May 2012, Ramon Hofer wrote: On Sat, 19 May 2012 04:19:33 -0500, Stan Hoeppner wrote: On 5/19/2012 2:52 AM, Ramon Hofer wrote: On Fri, 18 May 2012 17:57:56 -0500, Stan Hoeppner wrote: On 5/18/2012 9:39 AM, Shane Johnson wrote: After that I would look to see if something isn't shorting out a USB port. Yes, USB is the cause of the over-current errors, which is plainly evident in his screen shot. But we don't yet know if this USB problem is what's hanging the system. Further troubleshooting is required. The strange thing is as I mentioned in another post is that on the mb usb port 8 there's nothing attached and I haven't found where port 7 is :-? I wouldn't worry about the USB errors at this point. Unless there is some larger issue with insufficient power on the motherboard causing the USB current error, it's likely unrelated to the storage hardware issue. Fix it first, then worry about the USB errors. Given you have no device plugged into those ports, it could be a phantom error. Yes I hope you're right with the phantom error :-) Especially because I can't find port 7. No label on the mb pcb nor in it's documentation. It might well mean one of the power planes is oversubscribed, and THAT can cause anything up to and including damage to hard disks, data corruption, and crashes. -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519160640.gb22...@khazad-dum.debian.net
Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On 5/19/2012 5:33 AM, Ramon Hofer wrote: Yes, I'm really thankful for the recommendation. And somehow I hoped you could jump in and help me :-) I'm actively working on it, have been for a couple of hours on and off. I'm reading your responses as I go before responding so I hopefully don't recommend something you've already tried. I'm still researching. In the mean time, if you can, go ahead and flash the 9240 with the latest firmware, precisely following the instructions. Also try the following: 1. Power the Intel expander with a PSU 4 pin Molex connector instead of using a PCIe slot. Molex are the large standard plugs, usually white, used to connect hard drives for the past 25 years--two black wires, one red, one yellow. With the chassis laying on your desk and the side/top cover panel removed, lay the anti-static bag the expander shipped in on top of the drive cage frame or PSU, then lay the expander card on its back on top of the bag--heat sink facing the ceiling. Make sure it doesn't fall off and ground out to the metal chassis or mobo, etc. This will eliminate a possible PCIe power bug in the mobo. 2. With the expander powered directly from the PSU, try the 9240 in each x16 slot until one works (I'm assuming you know that you must power down the system before inserting/removing cards or you'll very likely permanently damage the cards and/or mobo). If no success here... 3. Go into the mobo BIOS and set and test these options: Quiet Boot: DISABLED Interrupt 19 Capture: DISABLED --save/reboot/test-- PCI Express Port: ENABLED PEG Force Gen1: ENABLED Detect Non-Compliance Device: ENABLED --save/reboot/test-- XHCI Hand-off: ENABLED Active State Power Management: ENABLED PCIe (PCI Express) Max Read Request Size: 4096 --save/reboot/test-- If none of this works, disable both on board SATA controllers: Serial-ATA Controller 0:DISABLED Serial-ATA Controller 1:DISABLED and connect all drives to the 9240, and re-enable Interrupt 19 Capture: ENABLED This will allow booting from the 9240. In the 9240 webBIOS, create a RAID1 array device of two disks, make it bootable, save and initialize the array. Reboot into the Squeeze install disk and install onto the RAID1 device. The initialization should continue transparently in the background while you're installing Debian. When finished reboot to see if the boot hang persists. Hopefully you won't need to do all of these things as it will be very time consuming. I'm attempting to provide you a thorough troubleshooting guide that covers most/all the possible/likely causes of the hang. But I didn't know if it's ok to ask you by name. I've been doing a reply-to-all with each reply, hoping you'd follow suit. This list is very busy thus a reply-all ensures I won't miss your posts. Please feel free to address me by name and/or contact me directly off list. I recommended this storage controller/expander solution to you and it's not working yet. I'm not going to leave you twisting in the wind. That's not how I roll. ;) Besides, look at my RHS domain. I have a reputation to uphold. :) -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4fb7caf7.8060...@hardwarefreak.com
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Sat, 19 May 2012 03:05:03 -0400, Tom wrote in message CAOdo=SxrT0Qr-4L7ug5qLdtz7XTe4qcoA=rsjlx1oj2vq8y...@mail.gmail.com: On Fri, May 18, 2012 at 3:25 PM, Arnt Karlsen a...@c2i.net wrote: On Fri, 18 May 2012 17:04:02 + (UTC), Camaleón wrote in message jp5ve2$jg9$1...@dough.gmane.org: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free ..if you _never_ install source, you don't need deb-src lines. True, but aptitude changelog ... seems to require deb-src ... entries: Without deb-src ... # aptitude changelog grub-pc Err Changelog of grub-pc E: You must put some 'source' URIs in your sources.list E: Changelog download failed: Download queue destroyed. E: Couldn't find a changelog for grub-pc With deb-src ... # aptitude changelog grub-pc Err Changelog of grub-pc E: Changelog download failed: 404 Not Found E: Couldn't find a changelog for grub-pc ..aye. Now try 'apt-get changelog grub-pc ', both ways. ;o) -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519184138.79c96...@celsius.lan
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Sat, 19 May 2012 08:13:52 + (UTC), Camaleón wrote in message jp7ko0$27j$6...@dough.gmane.org: On Fri, 18 May 2012 21:25:25 +0200, Arnt Karlsen wrote: On Fri, 18 May 2012 17:04:02 + (UTC), Camaleón wrote in message jp5ve2$jg9$1...@dough.gmane.org: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free ..if you _never_ install source, you don't need deb-src lines. (...) If you want to get rid of the above error, yes _you do_ (see Tom's comment) ;-) ..really? ;o) root@celsius:~# apt-get changelog grub-pc Get:1 Changelog for grub-pc (http://packages.debian.org/changelogs/pool/main/g/grub2/grub2_1.99-21/changelog) [134 kB] Fetched 134 kB in 3s (38.5 kB/s) root@celsius:~# grep ^deb /etc/apt/sources.list deb http://192.168.1.140/debian sid main contrib non-free root@celsius:~# Anyway, I guess that can be a comestic error, the main problem was already reported in BTS (#669569). Greetings, -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519184734.50e0f...@celsius.lan
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Sat, 19 May 2012 18:47:34 +0200, Arnt Karlsen wrote: On Sat, 19 May 2012 08:13:52 + (UTC), Camaleón wrote in message jp7ko0$27j$6...@dough.gmane.org: On Fri, 18 May 2012 21:25:25 +0200, Arnt Karlsen wrote: On Fri, 18 May 2012 17:04:02 + (UTC), Camaleón wrote in message jp5ve2$jg9$1...@dough.gmane.org: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free ..if you _never_ install source, you don't need deb-src lines. (...) If you want to get rid of the above error, yes _you do_ (see Tom's comment) ;-) ..really? ;o) With aptitude, yes ;-) root@celsius:~# apt-get changelog grub-pc Get:1 Changelog for grub-pc (http://packages.debian.org/changelogs/pool/main/g/grub2/grub2_1.99-21/changelog) [134 kB] Fetched 134 kB in 3s (38.5 kB/s) root@celsius:~# grep ^deb /etc/apt/sources.list deb http://192.168.1.140/debian sid main contrib non-free root@celsius:~# sm01@stt008:~$ LANG=C; apt-get changelog grub-pc E: Invalid operation changelog And lenny does not have that option as available. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8k70$27j$2...@dough.gmane.org
Re: Changes In udev?
On Sat, May 19, 2012 at 03:35:29PM +, Camaleón wrote:
On Sat, 19 May 2012 11:04:02 -0400, Thomas H. George wrote:
In /dev cdrom4, cdrw4, dvd4 and dvdrw4 all point to sr1 and cdrom6,
cdrw6, dvd6 and dvdrw6 all point to sr0
I just replaced a dying motherboard - the ethernet circuit failed - and
on boot up found the above soft links. Perhaps this was changed in a
recent dist-upgrade and I only now noticed the changes. Either way my
/dev/fstab file was out of date as it contained entries like
/dev/sca1 /media/cdrom1 udf,iso9660 user,noauto 0 0
so my dvdrw drives were not found.
Are you running squeeze, wheehy, sid?
Wheezy
How many optical devices do you have, two (CD → sr1 and DVD → sr0)? You
can run dmesg | grep sr and send the output.
(...)
[1.802349] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[1.802964] sr 5:0:0:0: Attached scsi CD-ROM sr0
[2.936691] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[2.936900] sr 6:0:0:0: Attached scsi CD-ROM sr1
The dvdrw is a sata drive and the cdrw is a usb drive
changes in /dev?
You can try with:
/dev/cdrom /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/dvd /media/dvd0 udf,iso9660 user,noauto 0 0
The problem is that udev has chosen to link cdrom4 to sr1 and to link
dvdrw6 to sr0 so there are no /dev/cdrom /dev/dvd entries.
Note that /dev/cdrom and /dev/dvd are the names udev gives to your
devices based on the content of /etc/udev/rules.d/70-persistent-
cdrom.rules file.
Now that you direct me to the content of the
/etc/udev/rules.d/70-persistent-cdrom.rules file (attached below) it is
clear why the assignments cdrom4 and dvdrw6 were made but
where did all the extra entries in this file come from? Can I just
delete them? Will they be regenrated by future updates?
# This file was automatically generated by the /lib/udev/write_cd_rules
# program, probably run by the cd-aliases-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line
# and set the $GENERATED variable.
# DRW-2014L1T (pci-:00:05.0-scsi-1:0:0:0)
ENV{ID_CDROM}==?*, ENV{ID_PATH}==pci-:00:05.0-scsi-1:0:0:0,
SYMLINK+=cdrom, ENV{GENERATED}=1
ENV{ID_CDROM}==?*, ENV{ID_PATH}==pci-:00:05.0-scsi-1:0:0:0,
SYMLINK+=cdrw, ENV{GENERATED}=1
ENV{ID_CDROM}==?*, ENV{ID_PATH}==pci-:00:05.0-scsi-1:0:0:0,
SYMLINK+=dvd, ENV{GENERATED}=1
ENV{ID_CDROM}==?*, ENV{ID_PATH}==pci-:00:05.0-scsi-1:0:0:0,
SYMLINK+=dvdrw, ENV{GENERATED}=1
# DRX-510UL (pci-:00:02.1-usb-0:1:1.0-scsi-0:0:0:0)
ENV{ID_CDROM}==?*, ENV{ID_PATH}==pci-:00:02.1-usb-0:1:1.0-scsi-0:0:0:0,
SYMLINK+=cdrom1, ENV{GENERATED}=1
ENV{ID_CDROM}==?*, ENV{ID_PATH}==pci-:00:02.1-usb-0:1:1.0-scsi-0:0:0:0,
SYMLINK+=cdrw1, ENV{GENERATED}=1
ENV{ID_CDROM}==?*, ENV{ID_PATH}==pci-:00:02.1-usb-0:1:1.0-scsi-0:0:0:0,
SYMLINK+=dvd1, ENV{GENERATED}=1
ENV{ID_CDROM}==?*, ENV{ID_PATH}==pci-:00:02.1-usb-0:1:1.0-scsi-0:0:0:0,
SYMLINK+=dvdrw1, ENV{GENERATED}=1
# DRX-510UL (pci-:00:02.1-usb-0:1:1.0-scsi-0:0:0:0)
ENV{ID_CDROM}==?*, ENV{ID_SERIAL}==Sony_DRX-510UL_DRX-510UL_SYQ013324,
SYMLINK+=cdrom2, ENV{GENERATED}=1
ENV{ID_CDROM}==?*, ENV{ID_SERIAL}==Sony_DRX-510UL_DRX-510UL_SYQ013324,
SYMLINK+=cdrw2, ENV{GENERATED}=1
ENV{ID_CDROM}==?*, ENV{ID_SERIAL}==Sony_DRX-510UL_DRX-510UL_SYQ013324,
SYMLINK+=dvd2, ENV{GENERATED}=1
ENV{ID_CDROM}==?*, ENV{ID_SERIAL}==Sony_DRX-510UL_DRX-510UL_SYQ013324,
SYMLINK+=dvdrw2, ENV{GENERATED}=1
# Cruzer (pci-:00:02.1-usb-0:2:1.0-scsi-0:0:0:1)
ENV{ID_CDROM}==?*, ENV{ID_PATH}==pci-:00:02.1-usb-0:2:1.0-scsi-0:0:0:1,
SYMLINK+=cdrom, ENV{GENERATED}=1
# Cruzer (pci-:00:02.1-usb-0:2:1.0-scsi-0:0:0:1)
ENV{ID_CDROM}==?*, ENV{ID_SERIAL}==SanDisk_Cruzer_08778113C0C349E1-0:1,
SYMLINK+=cdrom, ENV{GENERATED}=1
# DVD_RW_DRU-510A (pci-:00:02.0-usb-0:1:1.0-scsi-0:0:0:0)
SUBSYSTEM==block, ENV{ID_CDROM}==?*,
ENV{ID_PATH}==pci-:00:02.0-usb-0:1:1.0-scsi-0:0:0:0, SYMLINK+=cdrom3,
ENV{GENERATED}=1
SUBSYSTEM==block, ENV{ID_CDROM}==?*,
ENV{ID_PATH}==pci-:00:02.0-usb-0:1:1.0-scsi-0:0:0:0, SYMLINK+=cdrw3,
ENV{GENERATED}=1
SUBSYSTEM==block, ENV{ID_CDROM}==?*,
ENV{ID_PATH}==pci-:00:02.0-usb-0:1:1.0-scsi-0:0:0:0, SYMLINK+=dvd3,
ENV{GENERATED}=1
SUBSYSTEM==block, ENV{ID_CDROM}==?*,
ENV{ID_PATH}==pci-:00:02.0-usb-0:1:1.0-scsi-0:0:0:0, SYMLINK+=dvdrw3,
ENV{GENERATED}=1
# DVD_RW_DRU-510A (pci-:00:02.0-usb-0:1:1.0-scsi-0:0:0:0)
SUBSYSTEM==block, ENV{ID_CDROM}==?*,
ENV{ID_SERIAL}==SONY_DVD_RW_DRU-510A_DRX-510UL_SYQ013324-0:0,
SYMLINK+=cdrom4, ENV{GENERATED}=1
SUBSYSTEM==block, ENV{ID_CDROM}==?*,
ENV{ID_SERIAL}==SONY_DVD_RW_DRU-510A_DRX-510UL_SYQ013324-0:0,
SYMLINK+=cdrw4, ENV{GENERATED}=1
SUBSYSTEM==block, ENV{ID_CDROM}==?*,
ENV{ID_SERIAL}==SONY_DVD_RW_DRU-510A_DRX-510UL_SYQ013324-0:0,
SYMLINK+=dvd4, ENV{GENERATED}=1
SUBSYSTEM==block, ENV{ID_CDROM}==?*,
ENV{ID_SERIAL}==SONY_DVD_RW_DRU-510A_DRX-510UL_SYQ013324-0:0,
Re: need help on using ffmpeg for video grab
On Sat, May 19, 2012 at 02:59:39PM +, Camaleón wrote: On Sat, 19 May 2012 05:51:51 +1200, Chris Bannister wrote: Wrong list! Please direct your question to a ffmpeg users list. I don't think so. It could be somehow [OT] but this list is okay for that kind of questions. No it is not! I know you mean well, but please don't encourage this type of behaviour, especially when there are lists available especially for these type of questions. -- If you're not careful, the newspapers will have you hating the people who are being oppressed, and loving the people who are doing the oppressing. --- Malcolm X -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519172832.GA19637@tal
Re: Changes In udev?
On Sat, 19 May 2012 13:12:49 -0400, Thomas H. George wrote: On Sat, May 19, 2012 at 03:35:29PM +, Camaleón wrote: (...) /dev/sca1 /media/cdrom1 udf,iso9660 user,noauto 0 0 so my dvdrw drives were not found. Are you running squeeze, wheehy, sid? Wheezy Ah... I thought it was squeeze. How many optical devices do you have, two (CD → sr1 and DVD → sr0)? You can run dmesg | grep sr and send the output. (...) [1.802349] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [1.802964] sr 5:0:0:0: Attached scsi CD-ROM sr0 [2.936691] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [2.936900] sr 6:0:0:0: Attached scsi CD-ROM sr1 The dvdrw is a sata drive and the cdrw is a usb drive Okay. You can try with: /dev/cdrom /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/dvd /media/dvd0 udf,iso9660 user,noauto 0 0 The problem is that udev has chosen to link cdrom4 to sr1 and to link dvdrw6 to sr0 so there are no /dev/cdrom /dev/dvd entries. That's editable. Note that /dev/cdrom and /dev/dvd are the names udev gives to your devices based on the content of /etc/udev/rules.d/70-persistent- cdrom.rules file. Now that you direct me to the content of the /etc/udev/rules.d/70-persistent-cdrom.rules file (attached below) it is clear why the assignments cdrom4 and dvdrw6 were made but where did all the extra entries in this file come from? Can I just delete them? Will they be regenrated by future updates? As the same file says at the top, yes, you can edit to fit your naming needs (or even try to delete it to see if it is auto re-generated after booting with the right device names), but before making any modification or deletion, back it up first :-) # This file was automatically generated by the /lib/udev/write_cd_rules # program, probably run by the cd-aliases-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single line # and set the $GENERATED variable. (...) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8lm7$27j$2...@dough.gmane.org
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Fri, May 18, 2012 at 05:04:02PM +, Camaleón wrote: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free You don't need one. The only reason you'd need one is if you are going to be compiling any software. -- If you're not careful, the newspapers will have you hating the people who are being oppressed, and loving the people who are doing the oppressing. --- Malcolm X -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519173929.GB19637@tal
Re: need help on using ffmpeg for video grab
On Sun, 20 May 2012 05:28:33 +1200, Chris Bannister wrote: On Sat, May 19, 2012 at 02:59:39PM +, Camaleón wrote: On Sat, 19 May 2012 05:51:51 +1200, Chris Bannister wrote: Wrong list! Please direct your question to a ffmpeg users list. I don't think so. It could be somehow [OT] but this list is okay for that kind of questions. No it is not! ? Then kindly explain why you think so. FFmpeg is a program like any other available and packaged for Debian (29,000 and increasing), if a user has problems for using it, what do you suggest then? Send every user to every single list of every single package? With all the due respects, that's nonsense. I know you mean well, but please don't encourage this type of behaviour, especially when there are lists available especially for these type of questions. Sorry, but to be sincere, I don't see the problem. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8m7r$27j$2...@dough.gmane.org
Re: Wheezy: aptitude update fails
On Sat, May 19, 2012 at 12:03 PM, Camaleón noela...@gmail.com wrote: On Sat, 19 May 2012 17:38:34 +0200, antoinejou wrote: All of this makes me mad... (...) W: Failed to fetch bzip2:/var/lib/apt/lists/partial/ftp.fr.debian.org_debian_dists_wheezy_main_i18n_Translation-en: Somme de contrôle de hachage incohérente E: Some index files failed to download. They have been ignored, or old ones used instead. E: Impossible de reconstruire le cache des paquets (...) Okay, okay... I'm also getting the same hash mismatch error _now_. There must be something changing at the servers, we'll have to wait. This wasn't happening to me yesterday but it happened to me earlier today. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOdo=SxpzjhYweDKQ2vrRTpWe72kFgtPOd4TnQfTd=4=dkb...@mail.gmail.com
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Sun, 20 May 2012 05:39:29 +1200, Chris Bannister wrote: On Fri, May 18, 2012 at 05:04:02PM +, Camaleón wrote: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free You don't need one. The only reason you'd need one is if you are going to be compiling any software. Try yourself and then comment on the results. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp8ma1$27j$2...@dough.gmane.org
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Sat, May 19, 2012 at 12:41 PM, Arnt Karlsen a...@c2i.net wrote: On Sat, 19 May 2012 03:05:03 -0400, Tom wrote in message CAOdo=SxrT0Qr-4L7ug5qLdtz7XTe4qcoA=rsjlx1oj2vq8y...@mail.gmail.com: On Fri, May 18, 2012 at 3:25 PM, Arnt Karlsen a...@c2i.net wrote: On Fri, 18 May 2012 17:04:02 + (UTC), Camaleón wrote in message jp5ve2$jg9$1...@dough.gmane.org: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free ..if you _never_ install source, you don't need deb-src lines. True, but aptitude changelog ... seems to require deb-src ... entries: Without deb-src ... # aptitude changelog grub-pc Err Changelog of grub-pc E: You must put some 'source' URIs in your sources.list E: Changelog download failed: Download queue destroyed. E: Couldn't find a changelog for grub-pc With deb-src ... # aptitude changelog grub-pc Err Changelog of grub-pc E: Changelog download failed: 404 Not Found E: Couldn't find a changelog for grub-pc ..aye. Now try 'apt-get changelog grub-pc ', both ways. ;o) Thanks but I didn't say that it didn't work with apt-get only that aptitude seems to need deb-src ... entries. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOdo=Sy+8WL1a90H1rAqyhhBkmsG_3Pjw4tàicyevzucn...@mail.gmail.com
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Sat, May 19, 2012 at 1:10 PM, Camaleón noela...@gmail.com wrote: On Sat, 19 May 2012 18:47:34 +0200, Arnt Karlsen wrote: On Sat, 19 May 2012 08:13:52 + (UTC), Camaleón wrote in message jp7ko0$27j$6...@dough.gmane.org: On Fri, 18 May 2012 21:25:25 +0200, Arnt Karlsen wrote: On Fri, 18 May 2012 17:04:02 + (UTC), Camaleón wrote in message jp5ve2$jg9$1...@dough.gmane.org: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free ..if you _never_ install source, you don't need deb-src lines. (...) If you want to get rid of the above error, yes _you do_ (see Tom's comment) ;-) ..really? ;o) With aptitude, yes ;-) root@celsius:~# apt-get changelog grub-pc Get:1 Changelog for grub-pc (http://packages.debian.org/changelogs/pool/main/g/grub2/grub2_1.99-21/changelog) [134 kB] Fetched 134 kB in 3s (38.5 kB/s) root@celsius:~# grep ^deb /etc/apt/sources.list deb http://192.168.1.140/debian sid main contrib non-free root@celsius:~# sm01@stt008:~$ LANG=C; apt-get changelog grub-pc E: Invalid operation changelog And lenny does not have that option as available. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=526990 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOdo=swcjqgtrp3jtmq_vq-zy-qfnsok_zyhykyjjwxefh6...@mail.gmail.com
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Sat, May 19, 2012 at 05:46:41PM +, Camaleón wrote: On Sun, 20 May 2012 05:39:29 +1200, Chris Bannister wrote: On Fri, May 18, 2012 at 05:04:02PM +, Camaleón wrote: You have no source repo listed. deb-src http://cdn.debian.net/debian testing main contrib non-free You don't need one. The only reason you'd need one is if you are going to be compiling any software. Try yourself and then comment on the results. Having to get by on teensy-weensy amounts of bandwidth means this squeeze install has *never* had deb-src entries in sources.list. Never got an error from it... It's either a bug, or perhaps something is installed which is only available from a deb-src entry. -- ❤ ♫ ❤ ♫ ❤ ♫ ❤ Indulekha -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519181045.GA7859@radhesyama
Re: aptitude changelog gives You must put some 'source' URIs in your sources.list
On Sat, 19 May 2012 13:51:37 -0400, Tom wrote in message CAOdo=Sy+8WL1a90H1rAqyhhBkmsG_3Pjw4t=e0icyevzucn...@mail.gmail.com: Thanks but I didn't say that it didn't work with apt-get only that aptitude seems to need deb-src ... entries. ..aye, it's because apt-get and aptitude does these things _differently_, and that's handy when a bug in one program makes you try a work-around using the other. -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120519203056.49070...@celsius.lan
NFS mounts and Debian
Hi everybody... What's going on with Debian today? After the aptitude checksum fail, now comes the /etc/init.d/networking bug at startup. Description of the problem: After a pair of update of ifupdown and netbase (i think, but i'm not shure), the computer failed to start and stop init process at Configuring network interfaces... Starting rpcbind daemon... Starting NFS common utilities: statd idmapd. And nothing else... apparently... the computer actually start after a couple of minutes, after showing some timout lines. # cat /etc/network/interfaces allow-hotplug eth0 # cat /etc/fstab # serveur on Serveur 192.168.1.200:/media/serveur /media/serveur nfs rw,auto 0 0 Nothing which draws attention when reading /etc/init.d/networking nor /etc/network/if-up.d/mountnfs ... Antoine -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1337452996.4fb7e9c486...@imp.free.fr
