Re: SMS

[G2PC]

> C'est ton droit de refuser de payer, mais
> dans ce cas ne reproche pas aux autres de parler d'argent. Quant à
> valoriser ou dévaloriser le travail des autres, exiger un service
> gratuit c'est exactement du même niveau (il y a des gens qui
> travaillent dans les télécoms - et comme tu sembles assez enclin à
> faire des procès d'intention, je précise que je n'en fais pas partie)
> et exiger de bénéficier de leurs services gratuitement, c'est
> dévaloriser leur travail.
>
> bonne journée
>
> Éric Dégenètais

Pour ma part la demande est claire, je cherche une solution gratuite,
car, clairement, je n'ai pas les moyens financiers pour investir dans
des solutions payantes à droite à gauche.

En plus de ne pas vouloir comprendre que je n'ai pas de revenu, tu
expliques que le travail peut être mis hors ligne et que ce n'est pas un
problème, c'est TON point de vue.

En ce qui concerne les pertes humaines, je crois qu'en travaillant
bénévolement, il y a déjà des pertes humaines dans la communauté, ce
serait dommage d'y ajouter de la perte d'accessibilité.

Pour ce qui est des procès d'intention, je crois avoir à faire à un
sophiste spécialiste.
Si ma question porte sur la façon de monter son serveur, ou, de trouver
une alternative gratuite, il faut comprendre que dès le départ, les
autres solutions ne m'intéressent pas, car, surtout, elles ne me sont
pas accessibles.

Re: best Debian available package to sync files

[0...@caiway.net]

> Please run it on a solar powered raspberry pi to keep it really
> absolute free ;-) 
> 
A few fun projects I host are some live distros:

https://sposkpat2.freedombox.rocks/

https://sposkmahjongg.freedombox.rocks/

https://sposkdegames.freedombox.rocks/

Re: best Debian available package to sync files

[0...@caiway.net]

On Mon, 27 Apr 2020 02:47:35 +0200
"0...@caiway.net" <0...@caiway.net> wrote:

> 
> https://freedombox.org/
> 
A good thing about freedombox is that you can register your own server
at XXXYYYZZZ.freedombox.rocks for free.

So you don't have to pay for DNS.

You can register at:

https://gnudip.datasystems24.net/gnudip/cgi-bin/gnudip.cgi

with ez-ipupdate you can keep your address when your provider changes
your ip

sudo apt install ez-ipupdate

Now you have your absolute free internet server.

Please run it on a solar powered raspberry pi to keep it really
absolute free ;-) 

Re: Herencia de IPCop (OT)

[Luis Enrique Araneda]

Gracias, pero una duda @Camaleon.. según el site de ip cop
http://www.ipcop.org/ indica que The latest *stable* IPCop version is
*2.1.9*, released on 2019-02-23.

me confunde un poco con las fechas que señalan algunos

El vie., 24 abr. 2020 a las 3:57, Camaleón () escribió:

> El 2020-04-22 a las 17:57 -0400, Luis Enrique Araneda escribió:
>
> >   Amigos,
> > he heredado un IPCop 1.4.21, por lo que veo es añejo.. no lo conozco muy
> > bien, pero por lo que veo es antiguo.
> > Quisiera saber si alguno de ustedes tiene algun dato de como hacerle un
> > update para pasar a la versión mas nueva y estable, o en su defecto
> quizás
> > tendré que reinstalar ( con los contro que esto implica).
> > Estoy viendo la alternativa de echar a andar la VPN, pero por lo que veo
> > esta versión antigua no tiene la opción de habilitar OpenVpn.
> > Desde ya agradecido por su auida!
>
> Si quieres mantenerlo (actualizarlo), yo empezaría leyendo el manual
> del administrador:
>
> IPCop v2.0.0 Administration Manual
> http://www.ipcop.org/2-0-0/en/admin/html/system-updates.html
>
> Pero no parece que el proyecto siga en desarrollo, y tratándose de una
> solución de seguridad, conviene apostar por un entorno que se mantenga
> actualizada:
>
> The closing of IPCop
> https://marc.info/?l=ipcop-user=150724971822628=2
>
> Saludos,
>
> --
> Camaleón
>
>

-- 
Luis Enrique Araneda
Ingeniero en sistemas

Re: best Debian available package to sync files

[0...@caiway.net]

On Mon, 27 Apr 2020 02:30:53 +0200
"0...@caiway.net" <0...@caiway.net> wrote:

> On Sun, 26 Apr 2020 18:30:10 -0500
> Anil F Duggirala  wrote:
> 
> > I know I may be misusing the word "sync".
> > I would like to ask if anyone can recommend the easy, yet "free" way
> > of getting some kind of file synchronization with a remote (like
> > dropbox, or onedrive). What would be the best way to set this up
> > using packages readily available in Debian. Can someone recommend an
> > alternative to dropbox, onedrive or google drive, which maybe
> > provides more control of my data to me?
> > thank you,
> > 
> > 
> 
> Sorry, my mistake,
> 
> To have a running FreedomBox, first install Debian (Buster or higher)
> on a clean machine. 
> 
> Then run:
> 
> $ sudo apt install freedombox
> 

https://salsa.debian.org/freedombox-team/plinth

FreedomBox is a community project to develop, design and promote
personal servers running free software for private, personal
communications. It is a networking appliance designed to allow
interfacing with the rest of the Internet under conditions of protected
privacy and data security. It hosts applications such as blog, wiki,
website, social network, email, web proxy and a Tor relay, on a device
that can replace your Wi-Fi router, so that your data stays with you.

I can tell you it is really nice.

Only problem I had: it is based on Apache, and I am used to nginx.

Re: best Debian available package to sync files

[0...@caiway.net]

On Sun, 26 Apr 2020 18:30:10 -0500
Anil F Duggirala  wrote:

> I know I may be misusing the word "sync".
> I would like to ask if anyone can recommend the easy, yet "free" way
> of getting some kind of file synchronization with a remote (like
> dropbox, or onedrive). What would be the best way to set this up
> using packages readily available in Debian. Can someone recommend an
> alternative to dropbox, onedrive or google drive, which maybe
> provides more control of my data to me?
> thank you,
> 
> 
Perhaps freedombox is what you are looking for:

in buster:

sudo apt install freedombox

https://freedombox.org/

Good luck!

Sorry, my mistake,

To have a running FreedomBox, first install Debian (Buster or higher)
on a clean machine. 

Then run:

$ sudo apt install freedombox

Re: best Debian available package to sync files

[0...@caiway.net]

On Sun, 26 Apr 2020 18:30:10 -0500
Anil F Duggirala  wrote:

> I know I may be misusing the word "sync".
> I would like to ask if anyone can recommend the easy, yet "free" way
> of getting some kind of file synchronization with a remote (like
> dropbox, or onedrive). What would be the best way to set this up
> using packages readily available in Debian. Can someone recommend an
> alternative to dropbox, onedrive or google drive, which maybe
> provides more control of my data to me?
> thank you,
> 
> 

Sorry, my mistake,

To have a running FreedomBox, first install Debian (Buster or higher)
on a clean machine. 

Then run:

$ sudo apt install freedombox

Re: best Debian available package to sync files

[0...@caiway.net]

On Sun, 26 Apr 2020 16:44:02 -0700
Peter Ehlert  wrote:

> syncthing
> 
> On April 26, 2020 4:30:21 PM Anil F Duggirala
>  wrote:
> 
> > I know I may be misusing the word "sync".
> > I would like to ask if anyone can recommend the easy, yet "free"
> > way of getting some kind of file synchronization with a remote
> > (like dropbox, or onedrive). What would be the best way to set this
> > up using packages readily available in Debian. Can someone
> > recommend an alternative to dropbox, onedrive or google drive,
> > which maybe provides more control of my data to me?
> > thank you,
> 
> 
> 

In my experience syncthing is not good at syncing 10 devices (amd64
debian, 32 bits raspbian, android) and 10 directories.

During tests I pushed syncthing to its limits.

Better restrict it to a few.

Re: best Debian available package to sync files

[Peter Ehlert]

syncthing

On April 26, 2020 4:30:21 PM Anil F Duggirala  
wrote:



I know I may be misusing the word "sync".
I would like to ask if anyone can recommend the easy, yet "free" way of
getting some kind of file synchronization with a remote (like dropbox,
or onedrive). What would be the best way to set this up using packages
readily available in Debian. Can someone recommend an alternative to
dropbox, onedrive or google drive, which maybe provides more control of
my data to me?
thank you,

best Debian available package to sync files

[Anil F Duggirala]

I know I may be misusing the word "sync".
I would like to ask if anyone can recommend the easy, yet "free" way of
getting some kind of file synchronization with a remote (like dropbox,
or onedrive). What would be the best way to set this up using packages
readily available in Debian. Can someone recommend an alternative to
dropbox, onedrive or google drive, which maybe provides more control of
my data to me?
thank you,

Re: Package integration date into repository

[l0f4r0]

Hi Andrei,

26 avr. 2020 à 09:09 de andreimpope...@gmail.com:

> The changelog does not necessarily show when the package was uploaded, 
> e.g. the package maintainer could prepare an upload (including the 
> changelog entry) and upload days/weeks/months later.
>
> After uploading the package also has to be (re)built before becoming 
> available on the mirrors.
>
Interesting. I'm not sure it makes things easier for me... ;)

> What are you trying to achieve?
>
I just would like to make some correlation between when new code is publicly 
available (through GitHub for example) and when it's integrated into official 
Debian repositories.

Maybe I can use section "news" on https://tracker.debian.org/pkg/my_package? I 
suppose there is no mention of stable (only experimental, unstable, testing and 
backports) into this section because testing becomes stable when the latter is 
released? If true, it would be handy to mark somewhere the transition between 
both repositories though.

NB: we can take a common example if it's easier to understand each other: copyq

Best regards,
l0f4r0

pip

[ghe]

> The package you want is python3-pip (already installed?), and the
executable is /usr/bin/pip3.

Thanks Liam. Works like a champ...

-- 
Glenn English

Re: python pip trouble

[Liam O'Toole]

On Sun, 26 Apr, 2020 at 16:13:28 -0600, ghe wrote:
> Buster, Supermicro workstation
> 
> I wanted to install pip (python3 is installed and working well and my
> apt mirrors are up to date):
> 
> root@sbox:~# apt install pip
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> E: Unable to locate package pip
> 
> I went to Synaptic to look around a bit. It installed (pip for
> pythion3). I went to man pip, and was told I could enter a command
> followed by --help:
> 
> root@sbox:~# pip install --help
> -bash: pip: command not found
> 
> root@sbox:~# whereis pip
> pip: /usr/bin/X11/pip
> 
> root@sbox:~# /usr/bin/X11/pip
> Traceback (most recent call last):
>   File "/usr/bin/X11/pip", line 9, in 
> from pip import main
> ImportError: No module named pip
> 
> root@sbox:~# cd /usr/bin/X11/
> 
> root@sbox:/usr/bin/X11# ls -lh pip
> -rwxr-xr-x 1 root root 292 Feb 24 16:14 pip
> 
> root@sbox:/usr/bin/X11# ./pip
> Traceback (most recent call last):
>   File "./pip", line 9, in 
> from pip import main
> ImportError: No module named pip
> 
> root@sbox:/usr/bin/X11# python pip
> Traceback (most recent call last):
>   File "pip", line 9, in 
> from pip import main
> ImportError: No module named pip
> 
> root@sbox:/usr/bin/X11# python3 pip
> Traceback (most recent call last):
>   File "pip", line 9, in 
> from pip import main
> ImportError: cannot import name 'main' from 'pip'
> (/usr/lib/python3/dist-packages/pip/__init__.py)
> 
> 
> What's it doing off everybody's $PATH? What's bent? My brain???
> 
> -- 
> Glenn English
> 

The package you want is python3-pip (already installed?), and the
executable is /usr/bin/pip3.

python pip trouble

[ghe]

Buster, Supermicro workstation

I wanted to install pip (python3 is installed and working well and my
apt mirrors are up to date):

root@sbox:~# apt install pip
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package pip

I went to Synaptic to look around a bit. It installed (pip for
pythion3). I went to man pip, and was told I could enter a command
followed by --help:

root@sbox:~# pip install --help
-bash: pip: command not found

root@sbox:~# whereis pip
pip: /usr/bin/X11/pip

root@sbox:~# /usr/bin/X11/pip
Traceback (most recent call last):
  File "/usr/bin/X11/pip", line 9, in 
from pip import main
ImportError: No module named pip

root@sbox:~# cd /usr/bin/X11/

root@sbox:/usr/bin/X11# ls -lh pip
-rwxr-xr-x 1 root root 292 Feb 24 16:14 pip

root@sbox:/usr/bin/X11# ./pip
Traceback (most recent call last):
  File "./pip", line 9, in 
from pip import main
ImportError: No module named pip

root@sbox:/usr/bin/X11# python pip
Traceback (most recent call last):
  File "pip", line 9, in 
from pip import main
ImportError: No module named pip

root@sbox:/usr/bin/X11# python3 pip
Traceback (most recent call last):
  File "pip", line 9, in 
from pip import main
ImportError: cannot import name 'main' from 'pip'
(/usr/lib/python3/dist-packages/pip/__init__.py)


What's it doing off everybody's $PATH? What's bent? My brain???

-- 
Glenn English

Re: vidéo conférence à plus de deux en peer-to-peer.

[Barthelemy Gabillaud]

Bonsoir,

Un petit Jitsi sur un simple VPS fait l'affaire si tu ne veux pas utiliser
Framasoft.

Très simple à mettre en place qui plus est.

Bonne soirée,

Le dim. 26 avr. 2020 à 20:27,  a écrit :

>
> À moins de faire de l’auto hébergement, la plupart de ces services
> sont actuellement saturés, malgré les efforts de Framasoft et autres
> pour multiplier les serveurs derrière ces services.
>
> Par exemple Qtox est-il dépendant d’un serveur centralisé ?
>
> https://packages.debian.org/buster/qtox
>
> Pour ne pas être tributaire de services centralisés saturés quelles
> sont les solutions peer-to-peer ?
>
> Merci d'avance.
>
> --
> Benoit
>
> Bonjour,
>
> Et sur https://tox.chat/ :
>
> *Distributed*
>
> *Tox has no central servers that can be raided, shut down, or forced to
> turn over data — the network is made up of its users. Say goodbye to server
> outages !*
>
> Reste à trouver des volontaires pour tester.
>
> Personnellement, je meurs d'envie de trouver enfin un logiciel de
> visioconférence libre que je pourrai recommander sans hésiter. Une envie
> certainement partagée.
>
> Je suis disponible pour tester.
>
> Nom d'utilisateur qTox : firenzert
>
> Bonne soirée
>
>
>
>
>

-- 
Barthelemy GABILLAUD.

Re: problème de connexion avec Wicd

[Vincent Lefevre]

On 2020-04-25 20:57:53 +0200, ajh-valmer wrote:
> On Saturday 25 April 2020 02:15:56 Vincent Lefevre wrote:
> > Le premier est qu'il ne se connecte pas automatiquement quand
> > l'interface graphique est ouverte. J'ai écrit un patch pour
> > corriger ce problème, cf
> >   https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=833929
> 
> Pourtant, il y a une case à cocher "Connexion automatique".
> Chez moi, Wicd me connecte bien au boot sans action manuelle.
> (Buster 32 bits).

sauf que comme indiqué, il y a des conditions "not self.gui_open"
qui font que quand l'interface graphique est ouverte, la connexion
automatique (en fait, reconnexion automatique) ne se fait pas.

-- 
Vincent Lefèvre  - Web: 
100% accessible validated (X)HTML - Blog: 
Work: CR INRIA - computer arithmetic / AriC project (LIP, ENS-Lyon)

Re: firefox 75 pulseaudio sound suddenly stopped working [SOLVED]

[Marco Möller]

I created a new profile only once.

I then copied the old directories and their contents (recursive)
to the new profile, *not* the files (approx. 64) in the profile's root
directory.

Then I followed
https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
to get most of my settings back.


Good that the problem could be solved like this, although not nice that 
the problem appeared at all.

Thanks a lot for having taken the time for clarification!

Re: firefox 75 pulseaudio sound suddenly stopped working [SOLVED]

[0...@caiway.net]

On Sun, 26 Apr 2020 19:40:14 +0200
Marco Möller  wrote:

> 
> >> I copied recursive all directories
> > 
> > I had to reinstall the extensions, they were still listed under
> > Extensions, but not working and the icons were gone
> 
> I am glad that you have solved you problem!
> 
> 
> For understanding:
> (1) So, for testing purpose you simply copied ALL the content of the
> old profile's directory to the new profile's directory.

I created a new profile only once.

I then copied the old directories and their contents (recursive)
to the new profile, *not* the files (approx. 64) in the profile's root
directory.

Sound worked again.

So fault must be in a/some file(s) in the root directory of the
old profile.


Then I followed 
https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
to get most of my settings back.

Bookmarks, open tabs, passwords, history, all reappeared.

My extensions showed up, greyed out, I had to reinstall them
manually. This was easy with approx. 10 extensions.

The icons in my bookmarks had disappeared, I use Checkmarks extension
to get most of them back automatically.

So far everything is OK.

(I could check out every file in the profile's root directory to find
the real problem, but that takes lots of time.)

My problem is solved, I have  a running firefox 75 with sound again.

> (2) And after this test showed promising results then you once more 
> created a new profile, but this time have only copied the files of 
> interest to it, the ones which are explicitly emphasized on the
> support page: 
> https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
> Finally, as announced on the support page, the extensions still
> needed to become reinstalled.
> 
> Did I understand it correctly?
 

Re: vidéo conférence à plus de deux en peer-to-peer.

[firenze . rt]

À moins de faire de l’auto hébergement, la plupart de ces services
sont actuellement saturés, malgré les efforts de Framasoft et autres
pour multiplier les serveurs derrière ces services.

Par exemple Qtox est-il dépendant d’un serveur centralisé ?

https://packages.debian.org/buster/qtox

Pour ne pas être tributaire de services centralisés saturés quelles
sont les solutions peer-to-peer ?

Merci d'avance.

--
Benoit

Bonjour,

Et sur https://tox.chat/ :

/Distributed//
/

/Tox has no central servers that can be raided, shut down, or forced to
turn over data — the network is made up of its users. Say goodbye to
server outages !/

Reste à trouver des volontaires pour tester.

Personnellement, je meurs d'envie de trouver enfin un logiciel de
visioconférence libre que je pourrai recommander sans hésiter. Une envie
certainement partagée.

Je suis disponible pour tester.

Nom d'utilisateur qTox : firenzert

Bonne soirée

Connexion résau sur cable + 4G

[benoit]

Bonjour,

Pour l'internet fixe, j'ai un fournisseur d'accès qui limite ma vitesse 
d'upload à 4 Mbps (si ça existe). ;-)

Mon abonnement mobile est plus rapide.

Vu que j'ai un forfait data mobile illimité, j'aimerais placer ma carte sim 
dans ma clé 4G quand je dois uploader des gros fichiers.

Existe-il une config réseau qui détecte automatiquement (avec network-manager) 
la présence de deux réseaux (4G et filaire) et qui utilise les deux de front 
pour transférer un seul gros fichier ?

Merci d'avance

--
Benoit

Sent with [ProtonMail](https://protonmail.com) Secure Email.

Re: firefox 75 pulseaudio sound suddenly stopped working

[Marco Möller]

I copied recursive all directories


I had to reinstall the extensions, they were still listed under
Extensions, but not working and the icons were gone


I am glad that you have solved you problem!


For understanding:
(1) So, for testing purpose you simply copied ALL the content of the old 
profile's directory to the new profile's directory.
(2) And after this test showed promising results then you once more 
created a new profile, but this time have only copied the files of 
interest to it, the ones which are explicitly emphasized on the support 
page: 
https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
Finally, as announced on the support page, the extensions still needed 
to become reinstalled.


Did I understand it correctly?

Re: [buster]journalctl

[Grégory Bulot]

Le Sun, 26 Apr 2020 17:58:36 +0200 (CEST),
l0f...@tuta.io a écrit :
 
> Peut-être ai-je raté une subtilité mais le genre de commande suivant
> ne conviendrait-il pas ? journalctl --since "5 minutes ago" | grep
> "postfix/" Pas assez restrictif (volonté de ne greper que la partie
> MESSAGE ?) ?


Non effectivement, je croyais avoir fait le test et avoir eu les lignes
tronquées sur la longueur

Ce qui me gêne

 * je pensais que " l'os systemctl (not kiss) " pouvait le faire
   élégamment 

 * j'aurais voulu évité de piper : si je fais pas gaffe dans mon script,
   je pourrais oublier de traiter correctement une erreur a gauche du
   pipe.

Mais à défaut la réponse est correcte

Re: [buster]journalctl

[l0f4r0]

Bonjour,

26 avr. 2020 à 16:50 de greg...@bulot-fr.com:

> existe-t-il un moyen de ne récupérer que les ¹ 
>
>  * postfix/smtpd
>  * postfix/qmgr
>  * postfix/...
>
Peut-être ai-je raté une subtilité mais le genre de commande suivant ne 
conviendrait-il pas ?
journalctl --since "5 minutes ago" | grep "postfix/"
Pas assez restrictif (volonté de ne greper que la partie MESSAGE ?) ?

Bien cordialement,
l0f4r0

Re: firefox 75 pulseaudio sound suddenly stopped working [SOLVED]

[0...@caiway.net]

On Sun, 26 Apr 2020 16:50:00 +0200
"0...@caiway.net" <0...@caiway.net> wrote:

> On Sun, 26 Apr 2020 13:51:45 +0200
> "0...@caiway.net" <0...@caiway.net> wrote:
> 
> > On Sun, 26 Apr 2020 13:05:13 +0200
> > "0...@caiway.net" <0...@caiway.net> wrote:
> > 
> >  
> > > With a new profile sound plays.
> > > 
> > > But I like to keep my settings, saved passwords etc.
> > > 
> > > I wish I could find out what file I could delete/change in my
> > > present profile.
> > > 
> > > Thanks!
> > > 
> > 
> > I "solved" the problem by rename the ~/.mozilla directory to
> > ~/.mozilla2
> > Then I started firefox 75, a new profile is created.
> > 
> > I copied recursive all directories under
> > ~/.mozilla2/firefox/.default-release to 
> > ~/.mozilla/firefox/.default-release
> > overwriting all.
> > 
> > Sounds played again!
> > 
> > Then followed this link:
> > 
> > https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
> > 
> > and I believe all settings, passwords etc. are back again, and
> > sounds keep playing.
> 
> I had to reinstall the extensions, they were still listed under
> Extensions, but not working and the icons were gone.
> 
> I have only  a number of 10 installed, so this took only a few
> minutes.
> 
> 
> 
> 

Re: vidéo conférence à plus de deux en peer-to-peer.

[benoit]

Bonjour,

Je me répond à moi-même !
Et j'aurais du poster dans le fil : Système d'audio/video call : Jami.

https://jami.net/why-is-jami-truly-distributed/

Mais si qlq à d'autres infos sur d'autres logiciels... ;-)

--
Benoit

Sent with [ProtonMail](https://protonmail.com) Secure Email.

‐‐‐ Original Message ‐‐‐
Le dimanche 26 avril 2020 16:36, benoit  a écrit :

> Bonjour,
>
> Est-il possible de faire de la vidéo-conférence à plus de deux en
> peer-to-peer ?
>
> Bien qu'il existe un client lourd pour Jitsi Meet, j’ai cru
> comprendre en lisant cet article, que lors d’une conférence à plus
> de deux ça passe obligatoirement par un serveur.
>
> https://linuxfr.org/news/organiser-des-visioconferences-de-haute-qualite-avec-le-logiciel-libre-jitsi-meet#toc-cas-dune-visioconf%C3%A9rence-%C3%A0-trois-personnes-ou-plus
>
> À moins de faire de l’auto hébergement, la plupart de ces services
> sont actuellement saturés, malgré les efforts de Framasoft et autres
> pour multiplier les serveurs derrière ces services.
>
> Par exemple Qtox est-il dépendant d’un serveur centralisé ?
>
> https://packages.debian.org/buster/qtox
>
> Pour ne pas être tributaire de services centralisés saturés quelles
> sont les solutions peer-to-peer ?
>
> Merci d'avance.
>
> --
> Benoit

Re: firefox 75 pulseaudio sound suddenly stopped working

[deloptes]

0...@caiway.net wrote:

> The problem thus was in a file(s) in the root of
> ~/.mozilla/firefox/.default-release
> 
> I could not determine which file(s), I did not want to check all 84
> files in that directory.

This is great. Can you mark the thread as solved, please.

Re: firefox 75 pulseaudio sound suddenly stopped working

[0...@caiway.net]

On Sun, 26 Apr 2020 13:51:45 +0200
"0...@caiway.net" <0...@caiway.net> wrote:

> On Sun, 26 Apr 2020 13:05:13 +0200
> "0...@caiway.net" <0...@caiway.net> wrote:
> 
>  
> > With a new profile sound plays.
> > 
> > But I like to keep my settings, saved passwords etc.
> > 
> > I wish I could find out what file I could delete/change in my
> > present profile.
> > 
> > Thanks!
> > 
> 
> I "solved" the problem by rename the ~/.mozilla directory to
> ~/.mozilla2
> Then I started firefox 75, a new profile is created.
> 
> I copied recursive all directories under
> ~/.mozilla2/firefox/.default-release to 
> ~/.mozilla/firefox/.default-release
> overwriting all.
> 
> Sounds played again!
> 
> Then followed this link:
> 
> https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
> 
> and I believe all settings, passwords etc. are back again, and sounds
> keep playing.

I had to reinstall the extensions, they were still listed under
Extensions, but not working and the icons were gone.

I have only  a number of 10 installed, so this took only a few minutes.

[buster]journalctl

[Grégory Bulot]

Hello, 

avec ce x de systemd je m'arrache les cheveux depuis quelques
temps, cette fois-ci c'est la lecture de logs postfix 

  journalctl --since "5 minutes ago" -g "postfix/qmgr"

ne me retourne rien, par contre  : 

  journalctl --since "5 minutes ago" -grep "postfix/qmgr"

Compiled without pattern matching support, j'ai essayé de lire le
rapport de bug
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=890265... ce que j'en
comprends c'est que c'est pas gagné ...

existe-t-il un moyen de ne récupérer que les ¹ 

 * postfix/smtpd
 * postfix/qmgr
 * postfix/...

Note le journalctl -u postfix  est vierge excepté les stop/start de
postfix.

sinon, je pense aller vers un échec supplémentaire pour accepter
systemd et installer sysv a la place.


¹ : mon but final est de sortir les stats (différentiels) sur les mails
(accepted, noqueue, ...) toutes les 5 minutes 


Note : non y'a rien dans /var/log/mail* 



Merkiii 

vidéo conférence à plus de deux en peer-to-peer.

[benoit]

Bonjour,

Est-il possible de faire de la vidéo-conférence à plus de deux en
peer-to-peer ?

Bien qu'il existe un client lourd pour Jitsi Meet, j’ai cru
comprendre en lisant cet article, que lors d’une conférence à plus
de deux ça passe obligatoirement par un serveur.

https://linuxfr.org/news/organiser-des-visioconferences-de-haute-qualite-avec-le-logiciel-libre-jitsi-meet#toc-cas-dune-visioconf%C3%A9rence-%C3%A0-trois-personnes-ou-plus

À moins de faire de l’auto hébergement, la plupart de ces services
sont actuellement saturés, malgré les efforts de Framasoft et autres
pour multiplier les serveurs derrière ces services.

Par exemple Qtox est-il dépendant d’un serveur centralisé ?

https://packages.debian.org/buster/qtox

Pour ne pas être tributaire de services centralisés saturés quelles
sont les solutions peer-to-peer ?

Merci d'avance.

--
Benoit

Re: Sécuriser une clé USB

[Dethegeek]

Bonjour

Si je me souviens bien le format veracrypt est reconnu par LUKS. 

LUKS est aussi une option pour faire un chiffrement FDE (Full Disk Encryption)

Le 24 avril 2020 20:53:14 GMT+02:00, Rand Pritelrohm  
a écrit :
>On 2020-04-24 at 20:17(+0200),
>kaliderus  wrote:
>
>>Bonjour,
>>
>>Je voudrai :
>>Pouvoir chiffrer le contenu d'une clé USB (partition de type HPFS /
>>NTFS / exFAT).
>>Y avoir accès à partir d'une machine micro$oft.
>>
>>Quels outils me conseillez-vous ?
>>
>
>Bonsoir,
>
>Comme outils intéressants j'en connais deux :
>   — veracrypt (containers chiffrés)
>   https://www.veracrypt.fr/en/Home.html
>   — encfs
>   
> https://www.howtogeek.com/121737/how-to-encrypt-cloud-storage-on-linux-and-windows-with-encfs/
>
>Les deux sont multiplateforme et testés avec succès.
>
>Rand.

-- 
Envoyé de mon appareil Android avec Courriel K-9 Mail. Veuillez excuser ma 
brièveté.

Re: Système d'audio/video call : Jami

[firenze . rt]

Bonjour,

Ce n'est peut-être qu'une impression, mais si Jami est activement
développé, pourquoi la version stable n'est pas privilégiée pour Debian
au téléchargement sur leur site ? Elle ne date que du 27 décembre 2019
(la version nightly est du 21 avril 2020 au moment où j'écris ce
message, tandis que celle du dépôt officiel de Debian date du 15 février
2019). Quelle version faut-il préférer au bout du compte ?

En outre, est-ce que quelqu'un pourrait donner quelques conseils pour
configurer manuellement jami graphiquement ou en ligne de commande, afin
d'en tirer le meilleur quand on n'a pas la chance d'avoir la fibre
(ADSL/Wi-Fi/4G) ?

Je souhaite vraiment à l'équipe de Savoir-faire Linux de parvenir à
mettre en place un logiciel de visioconférence GNU que l'on pourra
préférer à Skype et ses semblables.

Bon dimanche.

Re: firefox 75 pulseaudio sound suddenly stopped working

[0...@caiway.net]

On Sun, 26 Apr 2020 13:05:13 +0200
"0...@caiway.net" <0...@caiway.net> wrote:

 
> With a new profile sound plays.
> 
> But I like to keep my settings, saved passwords etc.
> 
> I wish I could find out what file I could delete/change in my present
> profile.
> 
> Thanks!
> 

I "solved" the problem by rename the ~/.mozilla directory to
~/.mozilla2
Then I started firefox 75, a new profile is created.

I copied recursive all directories under
~/.mozilla2/firefox/.default-release to 
~/.mozilla/firefox/.default-release
overwriting all.

Sounds played again!

Then followed this link:

https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile

and I believe all settings, passwords etc. are back again, and sounds
keep playing.

The problem thus was in a file(s) in the root of 
~/.mozilla/firefox/.default-release

I could not determine which file(s), I did not want to check all 84
files in that directory.


Thanks to all!

Re: firefox 75 pulseaudio sound suddenly stopped working

[0...@caiway.net]

On Sun, 26 Apr 2020 13:46:46 +0300
Andrei POPESCU  wrote:

> On Du, 26 apr 20, 12:24:11, 0...@caiway.net wrote:
> > 
> > My firefox settings, permissions:
> > 
> > Default for all websites: Allow Audio and Video
> 
> Have you tried with a new profile or in safe mode?
> 
> Kind regards,
> Andrei

In safe mode the problem persists.

With a new profile sound plays.

But I like to keep my settings, saved passwords etc.

I wish I could find out what file I could delete/change in my present
profile.

Thanks!

Re: Lancer une appli graphique en ssh : ça s'améliore

[Sébastien NOBILI]

Bonjour,

Le 2020-04-22 20:11, ajh-valmer a écrit :

Du client :
ssh -v -p  root@ -X xeyes

debug1: Requesting X11 forwarding with authentication spoofing.
debug1: Sending command: xeyes
debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 
16384

debug1: client_request_x11: request from 127.0.0.1 55856
connect localhost port 6001: Connection refused


Est-ce qu'il n'y aurait pas des règles de firewall (sur le serveur SSH) 
qui bloqueraient l'accès à ce port ?


sudo iptables -L -n -v

Est-ce que le serveur SSH a mis en place l'écoute sur ce port ?

ssh -X -p  root@
sudo netstat -peanut | grep sshd

Pourquoi est-ce que ce numéro de port vaut 6001 alors que dans la 
configuration par défaut de SSHd, il devrait être 6010 ?


ssh -X -p  root@
grep X11DisplayOffset /etc/ssh/sshd_config

Est-ce que xauth est installé sur le serveur SSH (la machine 
"") ?


dpkg -l | grep xauth

Qu'est-ce que ça donne en décomposant les étapes ?

ssh -X -p  root@
echo $DISPLAY
xeyes

Qu'est-ce que ça donne en se connectant avec un autre compte utilisateur 
?


ssh -X -p  user@
echo $DISPLAY
xeyes

Sébastien

Re: firefox 75 pulseaudio sound suddenly stopped working

[Andrei POPESCU]

On Du, 26 apr 20, 12:24:11, 0...@caiway.net wrote:
> 
> My firefox settings, permissions:
> 
> Default for all websites: Allow Audio and Video

Have you tried with a new profile or in safe mode?

Kind regards,
Andrei
-- 
http://wiki.debian.org/FAQsFromDebianUser


signature.asc
Description: PGP signature

Re: firefox 75 pulseaudio sound suddenly stopped working

[0...@caiway.net]

On Sun, 26 Apr 2020 08:05:43 +0200
deloptes  wrote:

> 0...@caiway.net wrote:
> 
> > pavucontrol shows my soundcard under Output Devices,
> 
> in the configuration tab does it say duplex?
> 

Yes, Analog Stereo Duplex.

Besides, qmmp does give sound with pulseaudio output selected.


My firefox settings, permissions:

Default for all websites: Allow Audio and Video

Re: Semaphore lifecycle?

[e...@coderhacks.com]

Thanks!

I will try the named semaphores.

And you are right, my quick sample did not have a loop.
But I use it in a "real program" that does not quit and then the effect 
is that only the semaphore disappears and the shared memory and the 
process does not.


Cheers
Christoph

On 26.04.20 11:50, Thomas Schmitt wrote:

Hi,


The semaphore should exists as long it is not
deleted or the OS restarts.

semget(2) and semctl(2) mention as explanation text sem_overview(7)
which is mainly about POSIX semaphores.

It promises persistence only for named semaphores:

   Persistence
 POSIX  named  semaphores  have  kernel  persistence:  if not removed by
 sem_unlink(3), a semaphore will exist until the system is shut down.

It fewly talks of sem*(2) calls:

   NOTES
 System V semaphores (semget(2), semop(2), etc.) are an older
 semaphore API.

It might be that the SysV variant has been re-implemented on base of
the POSIX variant and that traditional SysV persistence fell victim.
Or it might be that the usage pattern of IPC namespaces has changed
so that this statement of ipc_namespaces(7) gets into effect:

   When an IPC namespace is destroyed (i.e., when the last process that
   is a member of the namespace terminates), all IPC objects in the
   namespace are automatically destroyed.

The Linux man pages push people towards using POSIX semaphores. In your
use case probably towards named ones.



Also if I start the program with nohup and & it will stay executed.

By what loop inside ? The program you show will simply end after printing
its "OK" message.


Have a nice day :)

Thomas

Re: Semaphore lifecycle?

[Thomas Schmitt]

Hi,

> The semaphore should exists as long it is not
> deleted or the OS restarts.

semget(2) and semctl(2) mention as explanation text sem_overview(7)
which is mainly about POSIX semaphores.

It promises persistence only for named semaphores:

  Persistence
POSIX  named  semaphores  have  kernel  persistence:  if not removed by
sem_unlink(3), a semaphore will exist until the system is shut down.

It fewly talks of sem*(2) calls:

  NOTES
System V semaphores (semget(2), semop(2), etc.) are an older
semaphore API.

It might be that the SysV variant has been re-implemented on base of
the POSIX variant and that traditional SysV persistence fell victim.
Or it might be that the usage pattern of IPC namespaces has changed
so that this statement of ipc_namespaces(7) gets into effect:

  When an IPC namespace is destroyed (i.e., when the last process that
  is a member of the namespace terminates), all IPC objects in the
  namespace are automatically destroyed.

The Linux man pages push people towards using POSIX semaphores. In your
use case probably towards named ones.


> Also if I start the program with nohup and & it will stay executed.

By what loop inside ? The program you show will simply end after printing
its "OK" message.


Have a nice day :)

Thomas

Re: Please help me find a good Debian compatible video card

[tv.deb...@googlemail.com]

On 25/04/2020 19:28, Alexander V. Makartsev wrote:

On 25.04.2020 16:20, Jiangsu Kumquat wrote:

I want to get a good fast Debian compatible card for 1080p.

I was looking at this page...

Best Graphics Cards 2020 - Top Gaming GPUs for the Money | Tom's Hardware
https://www.tomshardware.com/reviews/best-gpus,4380.html

However, I think most or all of those cards won't work that great for
Linux because of compatibility issues.

Can you recommend a good card for me to use? I play windows games in
Debian with wine.

I tend to prefer AMD cards, but Nvidia cards are okay I guess as long
as they work well with Debian.

Thanks!!

_
PrivacyTools - Encryption and tools to protect against global mass
surveillance - https://www.privacytools.io -
https://www.reddit.com/r/privacytoolsIO/
--
More secure, more flexible, and completely free video conferencing. Go
ahead, video chat with the whole team. In fact, invite everyone you
know. Jitsi Meet is a fully encrypted, 100% open source video
conferencing solution that you can use all day, every day, for free —
with no account needed.
https://jitsi.org/jitsi-meet/


I highly recommend Nvidia-based cards, if you don't mind closed-source
drivers.
Many (Most?) games with Linux-native ports officially support only
Nvidia by game developers. I think, this is because of the drivers,
their quality and stability.
AMD-based card will usually work too, but (as long as I can remember)
quality of their drivers were something to be desired and drivers for
Linux are under heavy development, but they are open-source.
In case of Proton\WINE, you could get mixed results, because some games
(via DXVK) will work better with Nvidia and some are better with AMD.
"Better" here as in "less graphical glitches, more performance and
stability."
To play modern games in 1080p 60fps with high graphics settings you
would want minimum GTX1660 or better with 6Gb VRAM or more.



Hi, I have two kids and myself playing all kind of games on Steam 
mainly, with protonplay (Steam customized Wine version), on regular 
Wine, or standalone version (like GOG versions). All of us use AMD cards 
and we could not be happier, I would not go back to dealing with Nvidia 
drivers for anything. We used "Polaris10" generation cards (like RX570 
and RX580), "Vega10" generation (Vega RX 56), and currently "Navy10" 
(5700XT).
With Debian Stable you might have to use backports packages for optimal 
performances with the latest generation of GPU, but any 
Polaris/Vega/RadeonVII should work fine. Here we run Debian Unstable for 
the gaming/multimedia machines and everything just works without the use 
of any proprietary drivers (aside from the firmware provided by the 
non-free Debian "firmware-amd-graphics" package.


For game specific compatibility reports the "protondb" website maintains 
a good database [1], but it is only valid for Steam "Protonplay" 
platform. Of course there are many native games which run great with 
Debian and an AMD card, if you have a few specific titles in mind feel 
free to ask.


Hope it helps.


[1] https://www.protondb.com/

Re: (deb-cat) Instalacio i arrencada en el mode RST del BIOS

[Narcis Garcia]

Una petita passa més:
El disc «Hiren's PE» (suposo que pel mateix RST) no detectava la unitat
interna, i així el programa actualitzador de la BIOS no volia tirar
endavant sense trobar una partició EFI.
He fet una instal·lació de Debian d'una memòria USB sobre sí mateixa
(Live-USB arrencant amb «toram» i desmuntant el mateix USB), de manera
que ha quedat instal·lat com si fos una unitat interna amb UEFI.
Així aleshores he arrencat amb el disc «Hiren's PE» i l'actualitzador
InsydeH20 del BIOS ha accedit a tirar endavant perquè ha vist en algun
lloc una partició EFI.

Ja tinc el BIOS EH5L1 actualitzat a la versió 1.08, però segueix igual
d'inflexible: Sense alternativa a UEFI i sense alternativa a RST. La
unitat interna no arrenca amb Debian.

Mentre no aconsegueixo que el Linux de Debian (o el mdadm) suportin
aquest RST integrat al «Acer Aspire A315-54K», només veig com a solució
de què aquest ordinador utilitzi una memòria USB com si fos la unitat
Interna, amb una instal·lació EFI i el sistema de particions GPT que
requereix.
Habilitar també el «Secure boot» per a què el BIOS arrenqui el fitxer
que li selecciono: El «shimx64» que DebianInstaller desa a la partició
EFI. Dic aquest detall perquè el fitxer «grubx64» em resulta en un
«Linux (...) has invalid signature».


Narcis Garcia

__
I'm using this dedicated address because personal addresses aren't
masked enough at this mail public archive. Public archive administrator
should fix this against automated addresses collectors.
El 25/4/20 a les 20:18, Narcis Garcia ha escrit:
> Ahir es va començar a publicar Ubuntu 20.04 , la qual tampoc no detecta
> la unitat interna d'aquest portàtil, però el seu instal·lador ja m'ha
> descobert el problema amb un missatge d'alerta i un enllaç:
> https://help.ubuntu.com/rst
> 
> Però la configuració d'aquest BIOS no té previst canviar la modalitat
> RST per AHCI ni cap altra. Així que haig de trobar manera de suportar el
> mode «RST» en una instal·lació.
> A debian.org no hi trobo cap documentació sobre el tema.
> Segons Intel, això ja hauria d'estar suportat per mdadm des de fa anys i
> panys:
> https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/rst-linux-paper.pdf
> 
> Intentaré alimentar-me d'aquests apunts antics:
> https://tobestool.net/using-intels-rst-with-linux/
> Tot i que d'entrada amb aquestes comandes:
> $ sudo apt install mdadm
> $ sudo mdadm --assemble --scan
> $ sudo dmraid -ay
> No aconsegueixo detecció en una sessió «Live»
> 
> 
> Narcis Garcia
> 
> __
> I'm using this dedicated address because personal addresses aren't
> masked enough at this mail public archive. Public archive administrator
> should fix this against automated addresses collectors.
> El 25/4/20 a les 17:59, Narcis Garcia ha escrit:
>> També tinc la sensació de què el portàtil té problemes més enllà del UEFI.
>> He provat CentOS, i el mateix: Com si no hi hagués unitat interna.
>> He provat a bolcar Debian-Live a la unitat «M.2» i no aconsegueix
>> arrencar més enllà del initramfs perquè no troba el promi «media» d'on
>> treure el sistema de fitxers Live/squashfs. També ho he provat amb el
>> paràmetre «toram», amb idèntic resultat.
>>
>> No sembla un problema de maquinari, perquè un grub preinstal·lat sempre
>> funciona, i carrega vmlinuz/initramfs, i la consola de Busy Box hi
>> funciona perfectament (amb ls /dev no es troba cap unitat interna).
>> És a dir, que la BIOS sí que li passa el control al programari
>> instal·lat; després aquest no se'n surt a continuar.
>>
>> Com que aquest portàtil no té CD/DVD propi, li he hagut de connectar un
>> aparell de DVD extern per a provar més mitjans:
>> He arrencar el disc «Hiren's PE» versió Windows 10, i tampoc no detecta
>> la unitat interna. També he provat a actualitzar-li el BIOS amb aquesta
>> sessió «Live» de Windows 10, però el propi actualitzador «insyde»
>> proporcionat per Acer diu «mount the EFI System Partition failed».
>>
>> He provat un disc original de Windows 10 però aquest no l'he aconseguit
>> iniciar (ni amb secure boot ni sense...).
>>
>> El «Setup» d'aquest BIOS el pitjor que té és que al paràmetre «Boot
>> mode» només té previst el valor «UEFI»; no es pot canviar. I no
>> aconsegueixo actualitzar-li la versió 1.05 amb la versió 1.08 que és la
>> més recent publicada per Acer.
>>
>>
>> Narcis Garcia
>>
>> __
>> I'm using this dedicated address because personal addresses aren't
>> masked enough at this mail public archive. Public archive administrator
>> should fix this against automated addresses collectors.
>> El 25/4/20 a les 16:00, Alex Muntada ha escrit:
>>> Hola Narcis,
>>>
 No puc fer-hi un chroot al mateix portàtil des d'una arrencada
 «Live» perquè no detecta la unitat quan és en aquest portàtil.
>>>
>>> Jo he instal·lat sense problemes la Debian 10 a l'ordinador de la
>>> feina i al meu portàtil personal, tots dos amb discos M.2 i UEFI.
>>>
>>> Val a dir que cal arrencar l'USB d'instal·lació en mode UEFI si

Semaphore lifecycle?

[e...@coderhacks.com]

Hello!

I have a problem with a semaphore and I am not sure whats the problem. 
Its about the lifecycle of a semaphore after logout.




The workflow:
A program creates a semaphore and exits.
It is executed by a non-root user.
After execution the user quits the session (logout).



If I do the workflow on Debian 8 the semaphore is still here if I relogin.
Thats what I would expect. The semaphore should exists as long it is not 
deleted or the OS restarts.


If I do it on Debian 9 the semaphore is deleted after I relogin and 
check (ipcs).


If I do it on Debian 9 with root or sudo the behaviour the same as it is 
on Debian 8.




Heres a little programm in C++ for testing.
sem.cpp
int main (void)
{
    printf ("\n*** SEM ***");
    long semkey = 0x99112233;
    printf ("\nkey=%x", semkey);
    long sem = semget (semkey, 1, IPC_CREAT | IPC_EXCL | 0666);
    if (sem == -1)
    {
    printf ("\nunable to create SEM (perhaps an old exists, try to 
delete)");

    sem = semget (semkey, 1, 0666);
    if (sem == -1)
    {
    printf ("\nunable to get old SEM");
    }
    else
    {
    if (semctl (sem, 0, IPC_RMID) == 0)
    {
    printf ("\nold SEM deleted");
    }
    else
    {
    printf ("\nunable to delete old SEM\n");
    return 1;
    }
    }

    printf ("\nretry to create SEM");
    sem = semget (semkey, 1, IPC_CREAT | IPC_EXCL | 0666);
    if (sem == -1)
    {
    printf ("\nunable to create SEM\n");
    return 1;
    }
    }
    if (semctl (sem, 0, SETVAL, 1) == -1)        // exactly 1 in 
critical-section

    {
    printf ("\nunable to init SEM\n");
    return 1;
    }

    printf ("\nOK\n");
    return 0;
}
---

Compile with g++ sem.cpp.


If the program also creates a shared memory that will stay after logout 
if executed by non-root.

Also if I start the program with nohup and & it will stay executed.
But the semaphore disappears.

???

Cheers,
CH

Re: Package integration date into repository

[Andrei POPESCU]

On Sb, 25 apr 20, 22:53:07, l0f...@tuta.io wrote:
> 
> Just a simple question: is there a CLI command to get the date from 
> which a specific package is available through my configured 
> repositories please?
> Or am I expected to directly check dates in "versioned links > 
> changelog" at https://tracker.debian.org/pkg/ 
> my_package?

The changelog does not necessarily show when the package was uploaded, 
e.g. the package maintainer could prepare an upload (including the 
changelog entry) and upload days/weeks/months later.

After uploading the package also has to be (re)built before becoming 
available on the mirrors.

What are you trying to achieve?

Kind regards,
Andrei
-- 
http://wiki.debian.org/FAQsFromDebianUser


signature.asc
Description: PGP signature

Re: /etc/default/keyboard not loaded at startup

[Andrei POPESCU]

On Sb, 25 apr 20, 16:39:24, gwinship wrote:
> I added following configuration to my /etc/default/keyboard

Hint: you can use 'dpkg-reconfigure keyboard-configuration' to get a 
text-mode wizard.

> XKBMODEL="pc105"
> XKBLAYOUT="gb,de"
> XKBVARIANT=""
> XKBOPTIONS="grp:win_space_toggle"
> 
> BACKSPACE="guess"
> 
> however. This does not load at boot.

What is "this" that doesn't load at boot? How do you check?

As per your Xorg.log below the configuration is applied.
 
[...]
 
> The /var/log/Xorg.log is
> 
> [   268.781] (**) Option "xkb_model" "pc105"
> [   268.781] (**) Option "xkb_layout" "gb,de"
> [   268.781] (WW) Option "xkb_variant" requires a string value
> [   268.781] (**) Option "xkb_options" "grp:win_shift_toggle"

Kind regards,
Andrei
-- 
http://wiki.debian.org/FAQsFromDebianUser


signature.asc
Description: PGP signature

Re: firefox 75 pulseaudio sound suddenly stopped working

[deloptes]

0...@caiway.net wrote:

> pavucontrol shows my soundcard under Output Devices,

in the configuration tab does it say duplex?