kernel version of woody 2.3.6
Hi! Does anybody know which kernel version is on disks-i386 of woody 2.3.6? Is 2.2 or 2.4? Thanks!
how to add application to icewm menu bar
Hi! I am using icewm window manager, how to add application (freeamp) to the menu bar of icewm, I don't want type 'freeamp' on the xterm every time. Thanks! Alex
Re: how to add application to icewm menu bar *n
Kevin, Done! Thanks! but I only have a text mode toolbar right now, Another question, how can I use a M$Windows98's icon to be my freeamp's icon? Alex On Wed, Jun 13, 2001 at 07:07:27PM +0800, Alex Kwan wrote: Hi! I am using icewm window manager, how to add application (freeamp) to the menu bar of icewm, I don't want type 'freeamp' on the xterm every time. vi ~/.icewm/toolbar then add: prog freeamp (icon name) freeamp You may need to make your own icon. Icewm needs the icons to be in a set of two sizes like: freeamp_16x16.xpm freeamp_32x32.xpm. I've used icons from different Windowmaker before and just changed the size to 16x16 and 32x32 with gimp, then added them to ~/.icewm/icons/. If you do make icons labeled freeamp_16x16.xpm and freeamp_32x32.xpm it will look like: prog freeamp freeamp freeamp then save and restart icewm.
Freeamp MP3 player problem
Hi! I have used apt to installed the Freeamp, the sound is good but have following problems: (1) only can play at root, other users can't (can open the freeamp but can't play), how to fix it? (2) can't create or save the playing list, how to fix it? Thanks! Alex
Sound Config Problem
I used my new compiled kernel to bootup the system, I checked the dmesg found that my sound card was detected: SB3.01 detected ok (220) SB DSP versions is just 3.01.. YM3812 and OPL-3 driver when I try to test the driver as follows: (1) # cat english.au /dev/audio /dev/audio No such device (2) # cat /dev/sndstat /dev/sndstat: No such device but I ls /dev I can found the sndstat and audio, what is going wrong?
How to enable some specify users to run pon and poff?
Hi! My dialup ppp connection only can run by root, How to config to enable some specify (not all) users to run pon and poff ? Thanks
Is this a bug of potato (2..2.15-2000-06-07)
Hi! I installed the basic debian potato system on my laptop by disks-i386/2.2.15-2000-06-07, my pcmcia ethernet card is working fine, but the pcmcia modem card can't ppp dial-out (no dial tone, but can bring up the /dev/modem device), than I downgrade to installed the slink 2.1R5, everything is alright, I can dialout to my ISP now (exactly same configuration and process as install the potato). Is this a bug of potato-2.2.15-2000-06-07 or only my system's problem? Thanks!
Re: How to complete sources.list?
(1) I have download the debian packages on a MS Windows partition as follows: C:\potato\main\*.deb C:\potato\contrib\*.deb C:\potato\non-free\*.deb How to complete the sources.list? (2) CDROM burned by official iso images. How to complete the sources.list?
True Type Support of Xfree86 4.0
I have seen the release notes of XFree86 4.0 said that it will supported the True Type Fonts. Is it mean that if I have installed the 4.0R and I don't need to install the xfs or xtt server to support true type fonts any more?
which SQL database?
Hi! I wanted to setup a Apache+PHP3 Intranet Database Server, Orcale, MySQL or PostgreSQL, which one is more easy to learn and config also better supported by Apache+PHP3 ?
Basic question abount apt install
Hi! (1) If I use apt-get to install a package, the package's name is simple or full? apt-get install apache or apt-get install apache_1.3.12-1.deb ? (2) If I only want to upgrade a package not whole system, Is the command apt-get upgrade package or apt-get install package_newversion.deb? Thanks
RFC 1878 documents for subnet
Where to got RFC 1878 documents for subnet mask and the valid addresses.
easy configue www server package
I want to setup intranet server for a small office, which easy configue is recommand?
Hidden File
Hi! (1) How to make a normal file to a Hidden File ? (2) How to view and edit a Hidden File? (3) How to make a Hidden File to a normal File? Thanks
Default Fonts of X Window
Hi! Is the default Fonts of X Window setting by the first line of FontPath of /etc/XF68Config? Thanks
Re: Default Fonts of X Window
Hi! Eric, It was because after I have installed X window 3.3.6 on my laptop, (not yet install any Window Manager and Application), I found that the fonts of xterm is big and ugly (titlle of the xterm window and display what I type) so I wanted to change it, how to? Thanks - Original Message - From: Eric G . Miller egm2@jps.net To: debian-user@lists.debian.org Sent: Saturday, May 27, 2000 10:16 AM Subject: Re: Default Fonts of X Window On Sat, May 27, 2000 at 08:54:37AM +0800, Alex Kwan wrote: Hi! Is the default Fonts of X Window setting by the first line of FontPath of /etc/XF68Config? Not sure what you mean by default. However, I believe X will give preference to the first version of a font that it finds (like, if you have TTF and Postscript versions of the same fonts, or 75dpi and 100dpi versions). X will bitch and complain if it can't find the fixed font which usually lives in the /misc font dir. However, the fonts that particular applications or window manager use are dependent on those apps. -- ¶ One·should·only·use·the·ASCII·characterset·when·compos » ing·email·messages. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
PPP dial-up client + PPP dial-in server on same PC
Hi! Can I setup two ppp connections (one client, one server ) on same PC at my office? One for dial-up to ISP to connect internet (I have already setup this one) and the other as a PPP Server to let me dial-in for remote access at home after the business hour. If can, How to set up? Thanks
which sound configuration utility?
Hi! 1) I am looking for a sound configuration utility (like sndconfig on Red Hat), which is it? 2) can I use the sndconfig of Red Hat on potato? thanks!
Re: Can I install Woody's packages on Slink?
Hi! Can I install Woody's packages (eg. kernel-2.2.14, XFree86-3.3.3.6) on a Slink System (because these packages of Slink is too old)? Thanks
Re: Basic Question fot apt-get
Hi! If I use apt-get to install a .deb package, does the apt will find the dependent package and install it, and check the conflict? Thanks
Re: How to upgrade from slink to potato
Hi! Because I am afraid the upgrade will loss my nstalled application and user's information. What is the safe way to upgrade slink to potato? Thanks
Re: Do I need modify lilo.conf after install new kernel image ?
Hi! After I using dpkg -i to install kernel image (kernel-image-2.2.14-ide_2.2.14-3.deb), Do I need modify the /etc/lilo.conf to config the system to use this new kernel? Thanks
Re: Only the PCMCIA Ethernet Card not Work
Hi! I have installed potato (floppies set base system) on my laptop, the modem card, scsi-2 card, and pcmcia CDROM all work fine, only the pcmcia ethernet card won't, (I have try two cards: 3com574TX and Melco LPC2-TX), If I inserted the modem card, scsi-2 card or pcmcia CDROM, then I executed lsmod I can all found the drive: serial_cs, aha152x_cs and ide_cs, but when I insert ethernet cards, that is no driver for ethernet card to be found. Would some one tell me why and how to slove? Thanks and have a nice weekend!
Re: pcmcia ethernet card module problem
Hi! I install potato on a laptop, following error message was displayed at the booting time: calculating module dependencies... depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/3c575_cb.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/tulip_cb.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/epic_cb.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/pcnet_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/3c589_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/nmclan_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/fmvj18x_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/smc91c92_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/netwave_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/wavelan_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/xirc2ps_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/3c574_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/ibmtr_cs.o depmod: ***Unresolved symbols in /lib/modules/2.2.14/pcmcia/8390.o please note these drivers are all for ethernet card, and now I can use all the supported pcmcia card except ethernet card. What is the problem? How to solve it? Thanks.
Re: HELP documents about APT for beginners
Hi! Where is the HELP documenst talking about APT for beginners. Thanks
Re: Problems of Potato on Toshiba Tecra510CDT
Hi! I have installed Potato on my laptop Toshiba Tecra510CDT (Card Controller: ToPIC95 Card Bus), but the PC Card Services are not work, I have follow the document PCMCIA How To to checked the information as follows: (1) When I insert or remove card, I can hear the beep sound. (2) The dmesg: Linux PCMCIA CARD Services 3.1.8 kernel build: 2.2.14 unknown options: [pci] [cardbus][apm] ToPIC95-B PCI-to-CardBus at bus 0 slot2, mem0x6800, 2 sockets host opts [0]: [slot 0xf0][ccr 0x1c][cdr 0x86] [[rcc 0x82][no pci irq][lat 168/176][bus 20/20] host opts [1]: [slot 0xf0][ccr 0x2c][cdr 0x86] [[rcc 0x82][no pci irq][lat 168/176][bus 21/21] ISA irqs (default) = 3,4,5,7,9,10,11,12 pollery interval=1000ms (3) lsmod ModuleSizeUsed by ds66002 i82365284842 pcmcia-core443840 (memory_cs ds i82365) (4) The socket status file, stab (I have inserted the 3com574TX) Can't found this file, because it is no sub-directory pcmcia on /var/state or /var/lib (5) cardctl config (I have inserted the 3com574TX): Socket 0: Vcc 5.0VVpp1 5.0V Vpp2 5.0V memory 0x0013-0x1012 @0x000d1000 (6) cardctl ident (I have inserted the 3com574TX): no product info available Would someone tell me what is the problem and how to slove? Thanks! Alex
Re: Basic PPP dialup to ISP question
Hi! I have configured the ppp dialup connection with pppconfig, (for example the connection named: MYISP), Now how do I establish and shut down the ppp dialup connection (not under GNOME)? Thanks! Alex
Install XFree86 4.0 on Potato
Hi! Debian Friends, Thank you all the help of yours, the ppp dial-out now work! Now I have another lesson to learn, it's install the XFree86 4.0 (non .deb packages) on Potato. I have already download the necessary binary files of Free86 4.0 (following to the XFree86's document), but I am afraid that if I follow the instruction of XFree86 to install (us Xinstall), it will make the dkpg system confuse (my debian box do not have X Window right now), which way is the better way to install the XFree86 4.0 on Potato? Thanks and have a nice weekend! Alex
Re: GUI FTP package
Hi! I am looking for a GUI FTP download software with resume broken download fuction (like Gozilla under MS Windows), Does anybody know which and where? Thanks! Alex
Updated Kernel and KDE
Hi! I have download the floppies from ftp.us.debian.org and installed a basic debian linux (potato) box, and now I want to complete thesystem and have following questions: (1) updated the kernel to (official release 2.2.14) which packages do I need? (2) I can't found the KDE packages in .deb format at ftp.us.debian.org, does the KDE supported by debian? Thanks
Updated Kernel and KDE
Hi! I have download the floppies from ftp.us.debian.org and installed a basic debian linux (potato) box , and now I want to complete the system and have following questions: (1) updated the kernel to (official release 2.2.14) which packages do I need ? (2) I can't found the KDE packages in .deb format at ftp.us.debian.org, does the KDE supported by debian? Thanks
How to setup NE-2000 PCI Ethernet Card
My LAN card was NE-2000 PCI (Realtek RTL-8029) How to set up the Command Line Argument on ne2k_pci module? Does anybody has this card too, would you please share your experience with me? Thanks
Re: How to setup NE-2000 PCI Ethernet Card
Hi! Marcelo, When I execute lspci, the display shown bash: lspci: command not found and I check the irq io on Windows98, the datas are: irq=9 io=7F80-7F9F My trouble is when I install the Base System of Hamm, at step Install Operation System Kernel and Modules, If I wanted to install the module of the NE-2000 PCI's driver, the installation program asked me to enter the command on the command line, if I let it blank, the installation of this modules will failed, of course my ethernet won't work. The question is: How to completed the Command Line Argument to make the ethernet cards's work? simply and step by step please, I am only a newbie. Thank You Very Much! Use lspci, like this: $ lspci [...] 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 8029 $ lspci -v -s 00:0b.0 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 8029 Subsystem: Unknown device 10ec:8029 Flags: medium devsel, IRQ 10 I/O ports at d000 Problem is: [507 pollux:~] dpkg -s pciutils Package: pciutils [...] Description: PCI Utilities for 2.1.82 and later This package contains various utilities for inspecting and setting of devices connected to the PCI bus. Requires kernel version 2.1.82 or newer (supporting the /proc/bus/pci interface). Anyway, I remember I just did modprobe ne_pci and it worked (kernel 2.1.1xx) Marcelo
ne2k_pci and other Modules question
My Ethernet Card was NE-2000PCI (Realtek RTL-8029) (1) When I install Hamm on my system, The Installation program asked me append command on the Command Line Agruments of ne2k_pci module, If I let it empty, this module installation will failed, also I can't find any interface of the ethernet card, How to completed it? (2) some modules of the other sections (like ipv4) also needed the Command Line Agruments or parameters, where will I found the informations (The Modules HOW-TO is out dated)? Thanks Alex
Config PCMCIA-LAN card on a laptop
Hi! I want to setup a LAN on my laptop with Hamm, and I have seen the document PCMCIA How To this document said that the laptop's configuration of network is difference with desktop PC , don't configure the PCMCIA ethernet card in /etc/rc.d/rcinet.1 (I can't found it on Hamm), but in the /etc/pcmcia/network.opts. And after I have modified the /etc/pcmcia/network.opts, how to setup others network configuration, (I still have not completed the route table). If someone have the PCMCIA ethernet card on Hamm, would you please share your experience with me? I need your help, I can't go on. Many thanks Alex Alex
How to set the LAN up automatically
Every time I want to make my LAN up, I need to config as follow: # ifconfig eth0 192.168.1.0 netmask 255.255.255.0 broadcast 192.168.1.255 up and #route add -net 192.168.1.0 eth0 I have try to added these two line on /etc/init.d/network and reboot, but still failure, If I want to use the eth0 I need to config as above again. How to set my LAN up automatically when the machine is boot? Best regards,
Re: How to set the LAN up automatically
Hi! Joost,
My /etc/init.d/network is (before I added two lines):
ifconfig lo 127.0.0.1
route add -net 127.0.0.0
IPADDR=192.168.1.6
NETMASK=255.255.255.0
NETWORK=192.168.1.0
BROADCAST=192.168.1.255
GATEWAY=
- belows are same as yours -
My LAN card is 3com 3C-574 TX, PCMCIA type.
I can see the message loading device 'eth0'...done
at the boot time
Regards,
Alex
What does your /etc/init.d/network look like? Mine is:
---cut---
#!/bin/sh
ifconfig lo 127.0.0.1
route add -net 127.0.0.0
IPADDR=130.139.64.47
NETMASK=255.255.255.0
NETWORK=130.139.64.0
BROADCAST=130.139.64.255
GATEWAY=130.139.64.1
ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}
route add -net ${NETWORK}
[ ${GATEWAY} ] route add default gw ${GATEWAY} metric 1
---cut---
Maybe the module for your network card isn't loaded at boot time?
For example, I have a 3c905 network card that needs the 3c59x module
(intuitive eh?) I can do thwo things:
Either have the module inserted always at boot time:
- put the word 3c59x (without quotes) on a single line in /etc/modules.
Or have the module autoloaded by kerneld (or kmod) when it is requested:
- put the word auto on a single line in /etc/modules and comment out
all
other lines in that file. And
- put a line alias eth0 3c59x in /etc/modules.conf to let the module
autoloader know what module to load for the eth0 device.
Cheers,
Joost
How to install modules after finished the installation
Hi! After I completed the installation of the Base System of Hamm, I found that I need some modules which have not selected from Step Install Operation Kernel and the Device Driver of Installation Program, How do I install these modules? In dont' want to re-install the Base System. Thanks Regards, Alex
How to mount a vfat-32 partition at installation
I am going to install the Hamm on my laptop (without floppy drive), when the procedure is going to Step 6 Installing Operation System Kernel and Modules and I selected the installation medium Hard Disk (I download the necessary base files e.g.. resc1440.bin , drv1440.bin, base2_0.tgz, root.bin, linux, install.bat, and loadlin on a directory of the /dev/hda1), but the installation program detect the /dev/hda1, How Can I let the installation program know that the operation system kernel and modules are on /dev/hda1, Please someone help me, I can't do anything now. Thanks Regards
P/S2 Mouse can't move on X windows
Dear Fans, I have install the Hamm on my laptop Toshiba Libretto-60, Everything are o.k. But only the mouse can't move on X-Windows, (I have already configured it as P/S 2 type at installation xf86config). Would someone please give me some hints to solve this problem? Thanks regards Alex
Question of /etc/fstab
Hi! the /etc/fstab of my systems is as follows: /dev/hdb2swapswap defaults00 /dev/hdb1/ext2 defautls11 /dev/hda1/fat-c vfat defaults10 /dev/hdc /cdrom /ISO9660ro 00 none/proc procdefaults 00 would someone told me what is the meaning of: 1)defaults00 2)defaults11 3)defaults10 4)ro 00 Thank You! -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Files for Installing Hamm on Toshiba Libretto CT-70
Hi! Debian Fans, I want to install Hamm on my laptop - Toshiba Libretto CT-70, but this model do not have a standard floppy drive, and it does not supported by linux. so I want to download the necessary files (by MS Explorer ) of base system of hamm on the partition of MS Windows, and then install the base system directly from hard disk, after completed the base system (support PCMCIA), install other packages by CDROM - PCMCIA. which files are needed (form /hamm/hamm/disk-i386/current)? Thank You -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Installing a single package using dselect.
Hi! I want to know and learn more about the apt-get, where are the resources? Alex On Wed, 22 Jul 1998, Chris Russell wrote: Is there any way to add a single package using dselect without updating the Packages file. All I want to do is add the man-db and netstd packages to the base system. Seems like the deselect is overkill and dpkg is underkill. apt is for you then. Just say apt-get update and then apt-get install man-db netstd -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Install Hamm on Cyrix CPU PC
Now I am ready to install the hamm to a Cyrix-GX200 MMX CPU PC, and I have seen the document Installing Debian Linux 2.0 on the /disk-i386/current/install.html (chapter 4.12) saying Many users of Cyrix CPUs have had to disable the cache in their systems during installation. does it mean disable the cache on the mainboard by BIOS settings? Thank You -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Linux run from Cyrix-GX200MMX CPU PC
Hi! Nate, Thank You very much, (1) now my system's kernel is 2.0.33, which and where the patch file for Cyrix-GX200MMX? I want to download it (2) Which X-server I needed for running X? Best regards Yes, I have one. It works peachily. I do reccomend installing and using set6x86 and patching your kernel with the cyrix patch (the new kernels, I believe) don't need this. So as to turn on some specific features of the CPU and so Linux will recognize it and lists it's name correctly in the logs. set6x86 and the patch are not required, just reccomended. Nate -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
RAM SIZE large than 64MB
I have seen the FAQ on FreeBSD documents, It was said that if the system have more than 64MB RAM, the user needed to use kernel option specified the actual RAM size, because I want to extend the RAM to 128M in my Hamm, so I have two questions: (1) Does the Linux is seem? (2) If needed, how to? Best Regards -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Iniitial Set Up
Now I upgrade my PC to a New One which has Pentium-II and Adaptec 2940UW SCSI Card, This System has install any system before, Do the floppy resc1440.bin can recognize the SCSI Card. Thanks! -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Linux run from Cyrix-GX200MMX CPU PC
Does the Linux can run on a Cyrix-GX200MMX CPU PC? Does anybody have installed Debian or others Linux on this PC? Thank You! -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
What is the change from /hamm/disk-i386/2.08 to /hamm/disk-i386/2.09
Would someone know the changes from /hamm/disk-i386/2.08 to /hamm/disk-i386/2.09 what is the difference between these two version? Thank You -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
How to build a custom kernel with kernel-source-2.0.34_2.0.34-4.deb
Dear debian fans, My system is hamm, and I have downloaded the kernel source (kernel-source-2.0.34-2.0.34-4.deb) from ftp.debian.org (1) What is the difference between linux-2.0.34.tar.gz and kernel-source-2.0.34_2.034-4.deb. (2) How to build a custom kernel with kernel-source-2.034_2.0.34-4.deb step by step please (I knew how to build it with linux-2.0.34.tar.gz) Thanks a lot! -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Packages of FTP Client (GUI)
I am looking for the packages of FTP Client (GUI) under X, Would someone know that? What is its name location? Thank You for Your Help! -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
use *.rpm and *.tar.gz packages on Hamm
Hi, Debian Fans, (1) Can I use the Redhat (*.rpm) and Slackware (*.tar.gz) packages on Hamm? If can, How to? (2) I have downloaded Netscape Communicator 4.05 for Linux 2.0 from Netscape, does it will working well with Hamm? Thanks Regards, -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: use *.rpm and *.tar.gz packages on Hamm
Hi, the alien needs the rpm and the rpm needs the libc5, (I checked these on www.debian.org/Packages) Hamm is using the libc6, Will the libc5 and libc6 happy to-gather? (1) Can I use the Redhat (*.rpm) and Slackware (*.tar.gz) packages on Hamm? If can, How to? Yeah, you can.. I suppose you have to install alien pacakge first.. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Reader / Editor for PDF Format Documents
My System is Hamm, which packages are the Reader or Editor for PDF Format Documents? Where can I download it? Thanks Regards, -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Check Required Relative Packages for New Packages
If I add a new packages to my Hamm system, How can I checked whcih packages are the relative packages (If Required) that I needed to add to my systems too. Thank You
What is apt-get Install
Would someone please explain that 1) What is the apt-get install 2) How to use apt-get install (step by step please) 3) What is the difference between apt and dpkg Many thanks!
Where are the Release Notes of Kernel?
How do I know what is the change from the last version (e.g. 2.0.33) to the updated version (e.g. 2.0.34)? I want to know the information like which drivers are added, which bugs are fixed, and which drivers are supported by the updated Kernel right now. Would someone let me know where is It ? (FreeBSD have the complete Release Notes on their Web Site.) Thank You
Move File From VFAT32 Partition to Linux
I want to move/copy a kernel file linux-2.0.34.tgz from VFAT32 Partition (C:) of MS Win98 (I have downloaded it before I install the Linux, and now I wanted to use it to updated the linux kernel 2.0.33 ) to the /usr/src/linux of Linux (MS Win98 Linux are live in the same PC but different HD), Thank You!
VCD Player and SB 16 PnP
(1) Does the Hamm has package of the VCD Player for X-Window (like Xing for MS Windows)? (2) My Soundcard was Soundblaster 16 PnP, do I need the isapnptools? If need, how to do it? (My systems is Hamm) Thank you very much!
ftp, telnet ping
I have installed the Base System of Hamm and configured the ppp, can I use ftp, telnet and ping command right now or needed to install other packages to do that. Thank You
KDE Windows Manager
My System is HAMM, If I want to install KDE Window Manager, Which packages are needed and where is it? Thank You!
Multiple Processors Netscape Communicator V.4.05
Hi! Debian Fans, (1) I want to upgarde my Linux system to 2 x Pentium-II system, and I have read the document Installing Debian Linux 2.0 on www.debian.org , at chapter 4.13 Multiple Processors have following words: If you compile software on a multiprocessor system, look for the -j flag in the documentation on make. would someone please help me to explain it? (2) where is the packages of Netscape Communicator V.4.05 for hamm? does it working well and stable? Thank you very much to everyone!
SB 64 AWE-64 , 56K Flex Modem SONY CDU-948S
Hi! Debian Fans, (1) What is the difference between SB AWE-64 Valve and SB AWE-64 Gold? (2) I wanted to upgrade my modem from 33.6K to 56K (my ISP supported 56K), can it be improve the speed of download and do I need changed something ( configuration etc.) to my Debian Linux Box? (3) My SCSI-Card was Adaptec 2940UW, and I wanted to add a SONY CDU-948S (8xR, 4xW) CD-ROM, does the Debian hamm supported it to read or write? (if anybody have this CD-ROM, please share your experience with me, thanks!) Thank you very much!
X-Window for 2.0beta
I have succeed to download and install the Debian 2.0 beta, and now I want to install X-Window too, can I use the X window packages on the debian 1.3.1R6 CD-ROM (distributed by Cheapbytes), also do the other packages on the 1.3.1R6 CD-ROM will working well under 2.0 beta? Alex Kwan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
X-window for debian2.0beta
I have installed the base system of debian2.0beta, and I want to setup X-Windows too, (1) can I use the packages of X-window on the CD-ROM of debian 1.3.1R6 (distributed by Cheapbytes.) (2) can I use the others applications' packages on the captioned CD-ROM. Thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
