Re: Installation de VirtualBox par les dépots Debian?
Bonjour, J'ai lu le thread et je ne savais pas où caser mon mail donc je réponds au mail initial. Le 27/03/2024 à 10:29, Alex PADOLY a écrit : > Peut-on installer VirtualBox par les dépôts Debian, en effet > l'installation à partir du paquet Debian sur le site d'Oracle génère des > erreurs difficiles à résoudre. Je ne réponds pas à la demande exacte, mais personnellement, utilisateur de virtualbox depuis longtemps avec testing et donc actuellement sous Trixie, pour ne plus avoir de problèmes de dépendances, je télécharge sur le site officiel le script VirtualBox x.x.x platform packages/ Linux distributions / All distributions en me tenant informé de la nouvelle stable avec la Mailing List Vitualbox-Anounce. Je n'ai jamais eu de soucis pour l'install et upgrade, mais on sort de la logique paquet Debian en s'installant dans /opt. > Enfin, d'une façon générale, comment doit-on aborder la virtualisation > sous LINUX Plusieurs ont répondu et moi aussi dirais que ça dépend des besoins. Personnellement, pour un poste de travail pour faire un labo de tests, Vitualbox ou ct LXC. Pour un serveur dédié physique, Proxmox. Mes 2 centimes. -- Manu
Re: Premiers pas avec proxmox. Snapshot impossible
Bonjour, Le 02/06/2021 à 14:40, Olivier a écrit : > Je débute avec Proxmox Ve 6.4 sous Buster. > La machine possède deux disques dont 1 dédié aux VMs. > > J'ai créé ma première VM avec l'interface graphique intégrée de Proxmox. > Tout semble fonctionner excepté que l'onglet Snapshot de la nouvelle VM > affiche: > "This current guest configuration does not support taking new snapshots". Regarder dans Datacenter-->Storage Seuls certains types de "storage" permettent les snapshot. https://pve.proxmox.com/wiki/Storage Si le storage qui héberge les vms est de type "directory", alors seuls les fichiers disques en qcow2 permettent les snaphsots. Si on veut pleinement profiter des snaphsot, choisir ZFS lors de l'install de proxmox, ou rajouter un storage en ZFS. -- Manu
Re: firewalld ou ufw
Bonjour, Le 09/11/2020 à 20:14, Gaëtan Perrier a écrit : Pas faux. Dans ce cas comment vérifier qu'il n'y a que des ports nécessaires qui sont ouverts ? Sur le serveur utilise la commande ss ou netstat (deprecated, il faut installer le paquet net-tools). Pour test depuis une machine distante, un scan de port avec nmap (paquet éponyme). -- Manu
Re: Support debian
Bonjour, Le 24/09/2020 à 11:10, Data3V a écrit : Nous souhaitons savoir si Debian propose le support et maintenance payant. Wallace vous a répondu sur cette partie. Si oui, est ce que les modules comme Samba V4 sont couvertes ? J'administre des samba déjà depuis quelques années sous Debian stable, donc je peux vous faire un retour d'expérience concernant le "support" autour de Samba concernant Debian. La doc officielle du projet Samba est sur leur wiki et est très très bien documentée pour chaque type de conf que vous voulez implémenter. Et la Mailing List est très active et réactive, et aboutissent (presque) toujours à la solution. Y participent activement la Samba Team dont certains devs et de nombreux pros. Vous avez donc ici un support de très grande qualité :-) Si toutefois vous cherchez à tout prix un tiers support, je vois que des membres de l'entreprise https://www.tranquil.it/ interviennent régulièrement sur la liste et ont une grande expertise Samba. 2 remarques : * Dans la logique Debian, une version de logiciel ne sera jamais upgradée durant son cycle de vie stable et Samba est un projet qui avance très vite. Ainsi, Buster propose 4.9.5 qui est déjà EOL, et la 4.13 vient juste de sortir. Les backports ne suivent pas le rythme. Mais un membre de la communauté propose les paquets debian des dernières versions des branches non EOL (4.11.x et 4.12.x) : http://apt.van-belle.nl/, et sont validés/recommandés par la Samba Team. Donc pour pourrez avoir très facilement votre Samba à jour. * D'après ce que je constate, les membres de la Samba Team utilisent eux-même Debian, Devuan ou Ubuntu. Si vous hésitez avec une distribution Red Hat, sachez qu'il ne fait pas nativement bon ménage avec Samba (du moins pour faire un AD). RHEL implemente MIT Kerberos qui n'est considéré que comme (très) expérimental dans Samba qui lui utilise Heimdal. Certes des contributeurs proposent leurs paquets mais c'est du gros tuning (modification de Kerbreos et des versions Python). Donc si vous souhaitez utiliser Samba et surtout mettre en place un AD, Debian est un excellent choix :-) Mes 2 cts. -- Manu -- Manu
Re: Lancement de Free Tube
Bonjour, Le 19/07/2020 à 22:03, firenze...@orange.fr a écrit : [5012:0719/154820.687768:FATAL:atom_main_delegate.cc(210)] Running as root without --no-sandbox is not supported. See https://crbug.com/638180. Trappe pour point d'arrêt et de trace $ freetube --no-sandbox devrait le faire. -- Manu
Re: Gimp 2.10
Bonjour, Le 29/11/2019 à 20:21, ajh-valmer a écrit : >> Tu devrais directement contacter le mainteneur : > Comment lui signaler, ou sera t-il à l'Opensummit de décembre ? $ apt show gimp [...] Maintainer: Debian GNOME Maintainers -- Manu
Re: apache2 tombe en erreur au démarrage
Bonjour, Le 02/11/2019 à 16:18, MERLIN Philippe a écrit : Depuis quelque temps suite à une mise à jour apache2 ne démarre plus sur ma debian amd64 Sid à jour. Voilà les diagnostics : nov. 02 11:46:58 portable systemd[1]: Starting The Apache HTTP Server... nov. 02 11:46:59 portable apachectl[1180]: AH00526: Syntax error on line 9 of /etc/apache2/mods-enabled/php7.3.conf: nov. 02 11:46:59 portable apachectl[1180]: Invalid command 'Require', perhaps misspelled or defined by a module not inclu> D'après http://httpd.apache.org/docs/trunk/mod/mod_authz_core.html#require La directive "Required" est fournie par le module mod_authz_core . Est-il bien toujours "enabled" ? -- Manu
Re: bumblebee fails to disable discrete graphics card after upgrade nvidia driver to 430.40-2
Hi, Exactly same problem here (bullseye uptodate). Debian bumblebee wiki page (and other searches on the net) didn't help More info : $ systemctl status bumblebeed.service bumblebeed.service - Bumblebee C Daemon Loaded: loaded (/lib/systemd/system/bumblebeed.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2019-09-06 10:50:41 CEST; 6min ago Main PID: 947 (bumblebeed) Tasks: 1 (limit: 4915) Memory: 24.7M CGroup: /system.slice/bumblebeed.service └─947 /usr/sbin/bumblebeed sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.419291] [ERROR][XORG] (EE) sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.419293] [ERROR][XORG] (EE) Segmentation fault at address 0x7f3873afa000 sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.419296] [ERROR][XORG] (EE) sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.419298] [ERROR][XORG] (EE) Caught signal 11 (Segmentation fault). Server aborting sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.419301] [ERROR][XORG] (EE) sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.419304] [ERROR][XORG] (EE) sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.419308] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additi sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.419311] [ERROR][XORG] (EE) sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.426969] [ERROR][XORG] (EE) Server terminated with error (1). Closing log file. sept. 06 10:55:39 ldlc bumblebeed[947]: [ 312.426997] [ERROR]X did not start properly $ cat /var/log/Xorg.8.log [ 312.408] (II) Initializing extension GLX [ 312.408] (II) Initializing extension GLX [ 312.408] (II) Indirect GLX disabled. [ 312.408] (II) GLX: Another vendor is already registered for screen 0 [ 312.408] (II) Initializing extension XFree86-VidModeExtension [ 312.408] (II) Initializing extension XFree86-DGA [ 312.408] (II) Initializing extension XFree86-DRI [ 312.408] (II) Initializing extension DRI2 [ 312.408] (II) Initializing extension NV-GLX [ 312.408] (II) Initializing extension NV-CONTROL [ 312.415] (EE) [ 312.415] (EE) Backtrace: [ 312.418] (EE) 0: /usr/lib/xorg/Xorg (OsLookupColor+0x139) [0x556f6ef4f2c9] [ 312.418] (EE) 1: /lib/x86_64-linux-gnu/libpthread.so.0 (funlockfile+0x50) [0x7f387750377f] [ 312.418] (EE) 2: /lib/x86_64-linux-gnu/libc.so.6 (memcpy+0x1f) [0x7f38773d003f] [ 312.418] (EE) 3: /usr/lib/x86_64-linux-gnu/libnvidia-glcore.so.430.40 (_nv043glcore+0x27ff39) [0x7f3876003339] [ 312.418] (EE) 4: /usr/lib/x86_64-linux-gnu/libnvidia-glcore.so.430.40 (_nv043glcore+0x28009d) [0x7f387600365d] [ 312.418] (EE) 5: /usr/lib/x86_64-linux-gnu/libnvidia-glcore.so.430.40 (_nv015glcore+0x49bb8) [0x7f3875ab5ba8] [ 312.418] (EE) unw_get_proc_name failed: no unwind info found [-10] [ 312.419] (EE) 6: /usr/lib/nvidia/nvidia/libglxserver_nvidia.so (?+0x0) [0x7f3873a00d32] [ 312.419] (EE) [ 312.419] (EE) Segmentation fault at address 0x7f3873afa000 [ 312.419] (EE) Fatal server error: [ 312.419] (EE) Caught signal 11 (Segmentation fault). Server aborting [ 312.419] (EE) [ 312.419] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 312.419] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information. [ 312.419] (EE) [ 312.421] (EE) Server terminated with error (1). Closing log file. Maybe a bug ? Thanks ! -- Manu
Re: recherche l'utilitaire mail
Bonjour, Le 20/07/2019 à 18:46, pat G a écrit : Je suis à la recherche de l'utilitaire mail. Celui qui permet d'envoyer des mails en ligne de commande. Avant c'était mail-utils, puis bdsmail-utils (je crois), mais dans buster je ne retrouve pas l'utilitaire à installer. Le paquet *mailutils* tout attaché fournit /usr/bin/mail.mailutils, et /usr/bin/mailx et /usr/bin/mail sont des liens symboliques vers lui. $ cat /etc/debian_version 10.0 $ ls -l /usr/bin/mailx lrwxrwxrwx 1 root root 23 oct. 24 2017 /usr/bin/mailx -> /etc/alternatives/mailx $ ls -l /usr/bin/mail lrwxrwxrwx 1 root root 22 oct. 24 2017 /usr/bin/mail -> /etc/alternatives/mail $ ls -l /etc/alternatives/mailx lrwxrwxrwx 1 root root 23 oct. 24 2017 /etc/alternatives/mailx -> /usr/bin/mail.mailutils $ ls -l /etc/alternatives/mail lrwxrwxrwx 1 root root 23 oct. 24 2017 /etc/alternatives/mail -> /usr/bin/mail.mailutils $ dpkg -S /usr/bin/mail.mailutils mailutils: /usr/bin/mail.mailutils -- Manu
Re: gestion de version de documents
Le 17/12/2017 à 11:49, Jean-Michel OLTRA a écrit : Avec Git, tu n'as pas besoin d'un "serveur de version". Tu crées ton propre dépôt en local, et tu peux bosser dessus. Il n'est pas nécessaire, si tu n'en a pas besoin, d'avoir un serveur distant (remote, upstream dans la littérature). Je n'ai pas lu qu'il a demandé de se créer spécifiquement un dépôt an local. Un gestionnaire de versions pour moi, je pense sauvegarde, accès d'où je veux, accès par une interface web. Et choisir un outil par rapport à ce qu'on veut faire. J'utilise aussi git dans un autre contexte qui est un super outil, et je trouve que c'est une "usine à gaz" par rapport à ce qu'il veut faire. Mes 2 centimes. L'essentiel est qu'il utilise quelque chose qui répond à ses besoins et qu'il pourra prendre en main aisément. Là aussi, je pense que svn est plus "facile". Après, les goût et les couleurs de chacun ... :-) -- Manu
Re: gestion de version de documents
Bonjour, Je recommenderai plus subversion que git dans ton cas, git est plutôt un gestion de versions pour du développement. J'utilise svn personnellement dans le me contexte que toi, c'est facilement installable et paramétrable. Le truc à prendre à compte, c'est que tes documents seront des binaires et pas du texte pur donc quand tu recevras par mail un diff de tes versions de documents, ben il n'y aura rien de visible. Mais il existe des outils pour comparer 2 fichiers odt par exemple. -- Manu
Re: [stretch] CUPS en français
Le 17/10/2017 à 11:25, Manu Baylac a écrit : Si on utilise Jessie (ou une distrib qui contient "nativement" le template fr dans cups, et qu'on utilise firefox, on peut pour aller au plus vite avec un about:config changer le paramètre intl.accept_languages, par défaut avec la valeur "en", en "fr" et ça marche. Juste une précision : après le changement, vider le cache et et recharger la page :-) -- Manu
Re: [stretch] CUPS en français
Bonjour, Le 16/10/2017 à 22:28, Mathias Dufresne a écrit : Concernant le fait que la distrib' ne soit pas la même chez François plutôt que râler je vais poser une question : As-tu un répertoire /usr/share/cups/template/fr ? Sous stretch et buster non, sous jessie oui. Cups est très utilisé et la traduction de ces pages n'est pas un travail hors du commun, ceci dit sans vouloir dénigrer à aucun moment le boulot fait par les contributeurs mais plutôt mettre en évidence que je serai fort surpris qu'aucune version de Cups n'ai jamais été traduite en français. Mais si, sous Jessie le paquet cups livre bien le template fr. Tout ça pour dire qu'ajouter le répertoire fr /usr/share/cups/templates/ semble insuffisant. Quelqu'un aurait une idée pour faire avancer le schmilblick ? Si on utilise Jessie (ou une distrib qui contient "nativement" le template fr dans cups, et qu'on utilise firefox, on peut pour aller au plus vite avec un about:config changer le paramètre intl.accept_languages, par défaut avec la valeur "en", en "fr" et ça marche. Sous strech/ buster, on peut faire la même chose avec les templates installés : avec la valeur es, j'ai mon cups en espagnol sans problème, et avec ru en russe. Mais en téléchargeant le répertoire fr de la branche master (avec un svn checkout https://github.com/apple/cups/trunk/templates/fr), ça ne marche pas. Je ne sais pas comment fonctionne le bousin sous le capot et je n'ai pas le temps de regarder. Personnellement, si je ne trouvais pas la solution rapidement sur le net ou par mes propres moyens, et que je voulais vraiment un cups en français, pour aller au plus vite (enfin...) je téléchargerais les sources de la branche master et recompilerai. Ou pour aller très très vite, j'ouvre mon interface web avec Chromium et j'active la traduction en fr à la volée par défaut. PS : pas vu un troll passer :-) -- Manu
Re: [stretch] CUPS en français
Bonsoir, Le 16/10/2017 à 13:10, Michel a écrit : Jessie avec cups 1.7.5, on a: ca, cs, de, es, fr, it, ja, pt_BR et ru. Oui, mais grâce aux contributeurs. Et la question est bien appuyée dans son titre, ça concerne Stretch. Cette stable est récente, il faut être un peu patient ou contribuer pour faire avancer les choses. Donc je persiste : Si François (Tourde) voit son cups en français sans problème et sans n'avoir rien fait comme il le dit, soit il n'a pas bien lu le titre et du coup porte à confusion car il n'est pas sous stretch, soit il utilise un navigateur avec la traduction automatique activée (c'est en majorité très bien traduit donc c'est bluffant). Le thread grossit alors que la solution est donnée et bien expliquée dans la première réponse 14 minutes après la question :-) -- Manu
Re: [stretch] CUPS en français
Bonjour, Le 15/10/2017 à 18:54, François LE GAD a écrit : Ce n'est pas prévu, mais tu peux t'y mettre : https://www.cups.org/doc/translation.html Sous Strech (et testing) cups est en version 2.2.1. On peut voir ici où en est la traduction fr : https://github.com/apple/cups/tree/master/templates/fr Et qu'on travaille dessus, et qu'on peut y contribuer. -- Manu
Re: [stretch] CUPS en français
Le 15/10/2017 à 22:44, François TOURDE a écrit : C'est peut-être pas prévu, mais moi j'ai l'interface CUPS (localhost:631) en français, sans avoir rien fait de particulier... Je soupçonne la traduction automatique de ton navigateur... Je suis partisan de la première réponse, celle de François Le Gad. Pour être sûr, comme l'indique clairement le lien qu'il a donné, regarder dans le dossier /usr/share/cups/templates. Il y a dedans un répertoire pour chaque langue traduite. Sous strech, je vois de, es, ja et ru seulement. Pas de fr. Donc sous firefox je vois mon cups en anglais. Je le regarde sous chromium avec le traduction automatique activée et hop un cups en français. -- Manu
Re: [stretch] CUPS en français
Bonsoir, Le 15/10/2017 à 22:44, François TOURDE a écrit : C'est peut-être pas prévu, mais moi j'ai l'interface CUPS (localhost:631) en français, sans avoir rien fait de particulier... Je soupçonne la traduction automatique de ton navigateur... -- Manu
Re: soucis avec https ( tcp 443 )
Le 12/09/2017 à 21:22, Sébastien NOBILI a écrit : Le mardi 12 septembre 2017 à 18:54, Manu Baylac a écrit : Tu recopies ta configuration de ton site qui écoute sur le port 80 dans /etc/apache2/site-available/default-ssl.conf (server name, ...) Il vaut mieux éviter de modifier ce fichier car il appartient au paquet et il faudra le fusionner à la prochaine mise à jour majeure. Il vaut mieux laisser ce fichier avec uniquement des directives en rapport avec SSL et mettre le reste de la conf autre part, voire recopier le contenu de ce fichier dans un fichier de conf spécifique (et donc inconnu du gestionnaire de paquets). Ça permet d’économiser un temps fou (et d’éviter les c⌀nneries) à la publication de la prochaine version de Debian. Tout à fait d'accord sur tout ce que tu dis, j'aurais du préciser que je répondais sur ssl et pas sur les bonnes pratiques "dans les règles de l'art", qu'il pouvait regarder ce fichier pour voir une conf fonctionnelle et voir ce qu'il lui faut pour que ça fonctionne. -- Manu
Re: soucis avec https ( tcp 443 )
Bonsoir, Le 12/09/2017 à 17:47, bernard.schoenac...@free.fr a écrit : bref pas de ssl au rapport et comment l'activer ? Sous apache2, un site ssl est déjà pré-configuré tout prêt mais pas activé. Tu recopies ta configuration de ton site qui écoute sur le port 80 dans /etc/apache2/site-available/default-ssl.conf (server name, ...) Puis tu n'as qu'à faire : # a2enmod ssl Pour activer le module ssl # a2ensite default-ssl Pour activer ton site # systemctl reload apache2.service (pas la peine de faire un restart) Remarque : les certificats ont été générés durant l'installation d'apache et sont auto-signés Et si tu veux une redirection permanente du port 80 au port 443 : redirect permanent / ton_url_ssl/ Bien sûr si tu ne veux pas utiliser le site par défaut, tu t'en crée un autre mais inspire-toi de la syntaxe de default-ssl. -- Manu
Re: addons invités virtualbox
Le 18/07/2017 à 21:44, G2PC a écrit : Je sais pas si tu as vu tous les messages, car, en fait, j'ai marqué à la fin du sujet, que c'était résolu ;) Oui j'avais vu mais quelquefois ça marche après avoir eu plein d'erreur et traficoté et c'était au cas où tu voulais tout refaire pour t'assurer une installation "propre". Et pour valider une dernière fois chaque étape de ton wiki du coup. -- Manu
Re: addons invités virtualbox
Bonjour, Le 18/07/2017 à 18:27, G2PC a écrit : Et seulement ensuite installer le paquet issu de virtualbox.org. C'est juste. Et, cela a bien été pris en compte : $sudo apt-get autoremove 'virtualbox*' Argh, je croyais que tu l'avais fait avant. À ta place, je repartirais de zéro, en désinstallant tout ce qui concerne virtualbox. Purge du paquet, autoremove... Installation du paquet. Pour plus facilement regarder les dépendances installées du paquet virtualbox-5.1 avec quelles versions si il y en a plusieurs, tu peux utiliser aptitude en mode graphique. Un même paquet avec plusieurs sources peut potentiellement "mélanger" les dépendances. Autant éliminer cette hypothèse. -- Manu
Re: addons invités virtualbox
Le 17/07/2017 à 21:10, G2PC a écrit : Je récapitule : https://www.visionduweb.eu/wiki/index.php?title=Installer_VirtualBox_sur_Debian#Mettre_VirtualBox_.C3.A0_jour Ca te semble correct ? De mon côté ça se lance correctement, mais, je n'ai pas fais attention, si la version a bien changée ou non. Je suis en 5.0.40 Pour garder la même logique de tes sections, rajoute "$ sudo" devant les 4 commandes, c'est vrai qu'il n'y a pas de compte root par défaut sous Mint. Pour vérifier la version, important dans ton cas, menu Aide/ À propos et tu devrais être en 5.1.xx. Toujours pour garder la même logique, ta section "Installer Virtualbox sur la machine hôte GNU Linux Debian Jessie depuis les dépôts officiels de VirtualBox" est obsolète, il faut suivre la même procédure que tu viens de suivre en remplaçant juste "xenial" par "jessie" dans les dépôts. Et tout ce que tu décris se fait automatiquement. Pour rester cohérent avec le reste de la page de ton wiki, tu peux mettre aussi apt-get au lieu de apt mais Le Handbook Debian depuis jessie/stable recommande d'utiliser apt à la place de apt-get. -- Manu
Re: addons invités virtualbox
Le 17/07/2017 à 20:50, G2PC a écrit : Par contre, une fois les paquets installés, je n'arrive pas à lancer virtualbox Je ne le trouve pas dans mes raccourcis programme, et, sudo virtualbox, ou, virtualbox, ou encore virtualbox-qt ne me donne rien. Et après avoir installé virtualbox-qt, que tu n'as pas installé au vu des logs que tu donnes ? Normalement, dans un terminal (pas en root, c'est mal), un simple : $ virtualbox devrait le faire. Sinon que se passe-t-il ? Que lis-tu sur ton terminal ? -- Manu
Re: addons invités virtualbox
Bonjour, Le 15/07/2017 à 23:17, G2PC a écrit : J'ai tenté mon bricolage. Supprimé Virtualbox et tenté de mettre le nouveau en 5.1 mais il ne passe pas, de mémoire, ça bloque, en me disant que certains paquets ne sont pas disponibles, car, pas encore sortit de testing. Ben c'est bizarre, car justement utiliser un paquet packagé pour sa distribution devrait régler les problèmes de dépendances... Du coup par rapport à mes mails précédents, j'ai donc vu que Mint Sarah est basé sur Ubuntu 16.04 Xenial, et justement le site virtualbox propose un dépôt pour cette distribution. Donc en mettant dans ton sources.list : deb http://download.virtualbox.org/virtualbox/debian xenial contrib , ça devrait le faire. C'est bien ce dépôt que tu as utilisé ? Je suppose donc que je suis dépendant des mises à jour de Mint. Qui suit les mises à jour d'Ubuntu pour lequel le paquet est packagé donc ça devrait marcher. Je viens de voir aussi sur un forum Mint que de la même façon que virtualbox n'est plus disponible dans Stretch côté Debian, il n'y aura plus de mise a jour du paquet virtualbox des dépôts Mint. Bref, si tu veux avoir la version 5.1 tu dois utiliser les dépôts officiels virtualbox sinon tu resteras en 5.0. Bien sur mettre à jour sa distribution avant de lancer l'install de virtualbox. Donc pour toi : # echo 'deb http://download.virtualbox.org/virtualbox/debian xenial contrib' >> /etc/apt/sources.list # apt update # apt full-upgrade # apt install virtualbox Et tu ne devrais pas avoir de problèmes de dépendances (à moins que tu aies des paquets "hold" ou des sources différentes avec du pinning, ça je ne peux pas savoir) -- Manu
Re: addons invités virtualbox
Bonjour, Le 14/07/2017 à 22:20, G2PC a écrit : Je me demande tout de même, si je suis sur mon hôte Linux Mint, est ce que ajouter le deb http:// de stretch est une bonne chose ? Rah désolé, je n'avais pas vu dans un précédent mail que le host était sous Mint, donc je vous ai donné un mauvais conseil et vous avez bien fait de poser la question avant de vous lancer ! On voit sur https://www.virtualbox.org/wiki/Linux_Downloads qu'il y a des fichiers deb pour Ubuntu, et Mint étant basé sur Ubuntu, il faut voir sur quelle version d'Ubuntu est basée votre version de Mint, puis suivre la procédure décrite dans le lien que j'ai mentionné pour renseigner le bon dépôt (avec le nom de la version Ubuntu). Pour l'installation, j'ai préféré personnellement sauvegarder mes vms, désinstaller le paquet debian/ jessie qui tournait sur ma bécane, installer virtualbox avec les dépôts officiels, puis restauration de mes vms. Je n'ai pas pris le temps de regarder les scripts de (pré/post) configuration du paquet car j'étais "pressé", mais je pense qu'un upgrade (sans désinstaller votre paquet actuel) devrait marcher. Mais je ne sais pas comment vous l'aviez installé, le paquet de votre distribution ou suivant votre procédure décrite dans vos précédents mails. Mélanger les méthode n'est pas la meilleure chose et potentiellement "mettre la pagaille". Perso, quand on est pas sur à 100% de son coup, sauvegarde (des vms) avant histoire d'être serein :-) -- Manu
Re: addons invités virtualbox
Le 14/07/2017 à 21:01, G2PC a écrit : J'ai regardé dans mes notes, j'ai conservé ceci [...] Mieux car plus propre et plus simple en suivant le wiki debian : Debian 9 "Stretch" Add virtualbox.list to /etc/apt/sources.list.d deb http://download.virtualbox.org/virtualbox/debian stretch contrib curl -O https://www.virtualbox.org/download/oracle_vbox_2016.asc sudo apt-key add oracle_vbox_2016.asc apt-get update apt-get install virtualbox-5.1 Ça marche bien, testé de mon côté. -- Manu
Re: addons invités virtualbox
Bonjour, Le 14/07/2017 à 20:30, G2PC a écrit : Ca me semble envisageable, j'ai sûrement cette procédure quelque part, mais, à tout hasard, tu n'aurais pas cette procédure fonctionnelle, pour m'aider à upgrade VirtualBox ? Est ce prudent ( je voudrais éviter les dysfonctionnements lourds ) et ne ferais je pas mieux d'attendre que cette mise à jour soit ajoutée aux paquets de mon hôte... ? Pour info, le paquet Virtualbox n'est plus disponible dans stretch donc n'attendez pas de mises à jours sans avoir modifié votre sources.list. Il faut utiliser les dépôts officiels Virtualbox. En cas, c'est toujours conseillé surtout si vous avez des données "sensibles", sauvegardez (exportez) vos vms avant. Mes 2 centimes. -- Manu
Re: Synaptics et double tap
Bonjour, Le 19/06/2016 à 11:13, Jean-Marc a écrit : Je ne me souviens pas avoir changer ça souvent sur ma Debian Jessie. Ooops, j'ai oublié de préciser : $ cat /etc/debian_version stretch/sid -- Manu
Re: Synaptics et double tap
Bonjour J'ai suivi le thread avec attention puisque confronté au même problème. Donc en effet libinput remplace synaptics. Les fichiers de conf sont dans /usr/share/X11/xorg.conf.d. Ces fichiers de conf sont lu dans l'ordre. Et si xserver-xorg-input-synaptics et xserver-xorg-input-libinput sont installés alors on voit que la conf de synaptics est lu en dernier et donc c'est lui qui impose sa config. Donc pour que libinput soit "prioritaire", soit désinstaller xserver-xorg-input-synaptics, soit renommer 60-libinput.conf en 90-libinput.conf. Et par défaut libinput désactive le tap et scrolling, donc les réglages n'apparaissent pas dans le panneau de config de "souris et pavé tactile". Pour retrouver ces possibilités de réglages, j'ai modifié le fichier de conf de libinput ainsi (c'est ixquick qui me l'a dit) # cat /usr/share/X11/xorg.conf.d/60-libinput.conf # Match on all types of devices but tablet devices and joysticks Section "InputClass" Identifier "libinput pointer catchall" MatchIsPointer "on" MatchDevicePath "/dev/input/event*" Driver "libinput" EndSection Section "InputClass" Identifier "libinput keyboard catchall" MatchIsKeyboard "on" MatchDevicePath "/dev/input/event*" Driver "libinput" EndSection Section "InputClass" Identifier "libinput touchpad catchall" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Driver "libinput" Option "NaturalScrolling" "on" Option "Tapping" "on" Option "TappingDrag" "on" Option "DisableWhileTyping" "on" EndSection Section "InputClass" Identifier "libinput touchscreen catchall" MatchIsTouchscreen "on" MatchDevicePath "/dev/input/event*" Driver "libinput" EndSection Et enfin je retrouve mon touchpad comme avant :-) -- Manu
Re: live CD Clamav Debian
Bonjour, Le 12/04/2013 11:04, maderios a écrit : C'est une plaisanterie ? Des noms de logiciels commerciaux plus ou moins douteux qui apparaissent sur une liste Debian, c'est presque du spam. Tu as raison, je m'excuse. Je ne travaille personnellement que sous linux (c'est mon métier et une de mes passions), mais un jour les ordis infectés des amis se sont accumulés, et j'avais assez de travail, bien plus intéressant, avec l'administration de mes serveurs (sous debian). J'ai botté en touche (erreur) et essayé de trouver un outil libre qui me simplifierait la vie dans cette période de rush. J'ai lu en 2s que c'était basé sur knoppix, et la tête dans le guidon, comme un idiot sans réfléchir, je me suis dit que c'était libre. Tu as le droit de me flageller sur la place publique avec des orties fraîches, j'assume cette horrible erreur. Mea culpa et désolé pour le bruit. Dommage qu'un véritable rescue CD n'existe pas chez Debian, un outil simple et complet, comme celui-ci basé sur Gentoo Je l'utilise régulièrement. Très bon outil. Pour info, histoire de dire quelque chose d'intéressant, dans mon boulot, et des lans avec des postes clients qui restent sous w$, nous faisons des déploiements d'image avec clonezilla drbl et des sauvegardes tous les soirs. Remise en service rapide en cas d'infections. Car dans ce cas, je préfère tout raser et partir sur du tout neuf. -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/5167fba7.1060...@ldd.fr
Re: live CD Clamav Debian
Bonjour, Le 05/04/2013 11:18, maderios a écrit : Je dois désinfecter un portable windows7+firefox certainement affecté d'un virus un ver (il redirige aléatoirement les recherches google vers des sites de m...). Evidemment, le Clamav installé est inopérant. Connaissez vous un bon live cd basé sur Debian + Clamav ? Je ne réponds pas exactement à ta question (quoiqu'avec le livecd F-secure basée sur Knoppix on s'en rapproche...), mais ça peut peut-être t'aider si tu ne connais pas. http://www.hacker10.com/computer-security/the-best-emergency-antivirus-recovery-live-cds/ Perso, j'ai testé DrWeb et F-secure, que j'ai trouvés chouettes. Mais finalement, les problèmes des ordis sur lesquels je les ai utilisé n'étaient pas dus à un virus, donc je ne peux pas faire de retour sur la qualité de la détection/ désinfection. -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/51671477.6030...@ldd.fr
Re: HS_Re: live CD Clamav Debian
Le 05/04/2013 16:11, maderios a écrit : Tu mets le doigt là où ça fait mal pour ceux qui refusent de voir l'évidence : ces (lamentables) problèmes de virus ou de ver proviennent de windows dont le système immunitaire est déficient. Quand un être humain est très malade, il fait appel à des compétences extérieures, ici Linux. Vouloir soigner un système vérolé de naissance, windows, par le même système vérolé, windows, est voué à l'échec... La seule voie pour le tirer d'affaire est la mise hors-service du système vérolé(windows) et l'utilisation d'un outil extérieur et indépendant, ici Linux Debian + antivirus Clamav. Il fallait le dire. Je plussoie. -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/51671626.6010...@ldd.fr
Re: impossible to bring up eth0 without link up at boot time
Bonjour, Le 10/04/2013 14:24, Charles Plessy a écrit : Debian fonctionne très bien avec un installation par défaut, comme rappelé plus haut dans ce fil de discussion. Dans beaucoup de cas, mais c'est loin d'être une réalité (cf. mes autres mails). Et une fois de plus, je rappelle le mail source du thread, un autre passage : je suis en train de m'amuser avec un wheezy sur un laptop toshiba, dont le chip eth n'est pas supporté par la squeeze. Exemple concret. A la base, on se fiche même du niveau de l'utilisateur. Mais le même cd installé par la même personne qui installe une squeeze, je dirais que le par défaut tout marche est proche du 100% avec un Dell, un hp, asus (je ne fais pas de pub) et à moins de 50% avec un acer (beurk), fujitsu-siemens etc... -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/51656dbc.7040...@ldd.fr
Re: impossible to bring up eth0 without link up at boot time
Ooops, Le 10/04/2013 15:48, Manu Baylac a écrit : Dans beaucoup de cas, mais c'est loin d'être une réalité :s/réalité/généralité -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/516570e9.3030...@ldd.fr
Re: impossible to bring up eth0 without link up at boot time
Bonjour, Le 09/04/2013 10:25, admini a écrit : le jour où mes amis me disent avoir installé un debian sans moi, et tout marche à merveille ... j'en serai vraiment ravi. Je dirais, pour faire rapide, que ce n'est pas possible, du moins pour un utilisateur de base qui n'a pas de connaissances en informatique. Il y a des centaines de distributions linux adaptées à des besoins différents. Si tu veux qu'une très grande majorité d'utilisateurs finaux (en particuliers ceux venant de W$) s'en sortent tout seul sans gueuler, conseilles leur Mint, voire Ubuntu mais en aucun cas Debian. Debian, c'est plus (pas une généralité) pour les geeks, ceux qui justement aiment bien maîtriser leur bousin et aiment/ n'ont pas peur de mettre les mains dans le camboui. D'autre part, vu la charte Debian où de base, tout est libre, si tu achète certaines marques connus fans de certains matériels exotiques, tu peux être sur que certains matériels ne marcheront pas (ethernet, wifi, ...), voire logiciels (flash) sans une intervention de root/ sudouser. Mint, basée sur Ubuntu, donc sur Debian, c'est je pense, comme ça a été dit dans ce thread, exactement ce que tu cherches. Tout ce qui est communément utilisé est installé d'entrée. Donc si tu veux que tout marche tout seul en utilisant que la souris et ne pas te fatiguer avec des gens qui râlent, ne leur propose pas Debian. Mes 2 cts. -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/516423b1.7080...@ldd.fr
Re: impossible to bring up eth0 without link up at boot time
Le 09/04/2013 16:20, Manu Baylac a écrit : Et je rajouterai que que vu la politique Debian, un utilisateur final (client) utilise testing, sinon il râlera car ses logiciels ont 3 ans. Testing... officiellement pas stable... donc intervention sans doute d'un admin... Le serpent se mort la queue. Maintenant que linux est clé en main et peut être installé par n'importe qui, proposes à des gens une distribution suivant leurs compétences et leur utilisation. Y'a plus de chances qu'ils ne disent pas : linux, c'est nul, ça marche pas, ça marche mieux windows... Ils veulent mettre une clé usb/ cd , faire clic clic clic sans rien lire et 30 mn plus tard aller sur un site avec du flash, écouter des radios en lignes, en wifi ou filaire, avoir un environnement graphique joli et intuitif ? Mais ils voudraient utiliser Debian... La (une) solution est Mint, car c'est sa conception. Un poste de travail facilement installé et fonctionnel pour la majorité des utilisateurs lambda. -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/5164293d.4060...@ldd.fr
Re: impossible to bring up eth0 without link up at boot time
Le 09/04/2013 21:12, stephane.garg...@laposte.net a écrit : De plus, quelque soit au tout début de ma conversion à Linux ou aujourd'hui (voire demain), quelque soit avant ou après l'installation d'un système GNU/Linux, je consulte toujours la documentation (qu'elle soit spécifique à la distribution ou non). Bref, la connaissance et la pratique (autrement dit l'expérience) : rien de mieux pour maîtriser son système GNU/Linux. Mais, bien sûr, cela demande quelques efforts... :-) Tout à fait d'accord. Je voulais insister sur le fait que, grossièrement, choisir debian au lieu de mint augmente *baucoup* le % de chance de devoir intervenir en root, même pour une utilisation basique type bureautique. Si une personne n'a pas de connaissances informatiques, veut que tout marche bien sans rien faire, il risque fortement de râler très vite. Et c'est normal. Mais au contraire, un débutant qui veut utiliser gnu/ linux, qui plus est qui a choisi en pleine conscience debian parce que cette distribution l'attire pour quelconque raison, qui n'a pas peur de passer du temps à aller sur le web à la quête d'infos pour essayer de se dépanner tout seul pour un problème mineur, je l'encourage grandement à tenter le coup. Il y arrivera sans doute. Au pire oui, il demandera à un admin, qui le dépannera, lui expliquera le pourquoi du comment. Et le débutant aura vécu ce problème comme un apport; il ne se sera pas plaint, au contraire il aura appris des trucs, et sans doute continuera a utiliser debian, prêt à affronter sereinement le problème suivant. Et rapidement il aidera d'autres débutants. Je ne pense pas qu'il faille systématiquement recommander/ installer debian à un utilisateur qui veut utiliser gnu/ linux parce que soi-même on l'utilise ou on l'aime. Il y a tellement le choix de distributions pour tous les goûts et les couleurs. -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/51647287.7030...@ldd.fr
Re: impossible to bring up eth0 without link up at boot time
Le 09/04/2013 22:46, Bzzz a écrit : Je plussois, plusieurs de mes connaissances sont sous Debian et je me connecte rélugièrement pour faire les MàJ par SSH (quoique pour le prochain ça deviendra chiant, étant donné que dyndns n'est plus gratuit et que mes 5 possibilités sont épuisées). Jusqu'ici, à part l'installation de pgms correspondant à leurs attentes, je n'ai eu aucune récrimination (ni PB:). Tous sont sous XFCE et personne n'a moufté par rapport à w$. \o/ On est tous d'accord. Donc si l'on revient au mail source de ce thread, je cite : cela signifie qu'une install de debian requière (encore) un vrai admin linux debian (car sous ubuntu ou même bsd, j'ai pas ce genre de soucis). là vraiment, c'est honteux quoi. je suis fâché. Y'a de quoi remettre les points sur les i non ? Et même si je ne mets pas de smiley ni de phrase de politesse à la fin, tout ceci reste sur un ton très cordial :-) -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/516489d6.4030...@ldd.fr
DHCP+iptables
Bonjour à tous, Je suis encore un peu débutant sous linux et j'ai un réseau qui fonctionnait grâce à un routeur fisique. Je souhaiterais me passer de ce dernier. Voici ma configuration : Sous réseau : 10.20.30.0 Serveur Windows : 10.20.30.2 Serveur Linux (Debian6) : 10.20.30.1 (Machine qui fait DHCP et passerelle vers ma freebox) Accesspoint Wifi : 10.20.30.3 Serveur NAS : 10.20.30.4 PC MAO : 10.20.30.5 PC Portable : 10.20.30.6 Téléphone IP : 10.20.30.7, 10.20.30.8, 10.20.30.9 Sur le linux Eth0 est connecté à la Freebox, Eth1 est connecté au réseau local (switch 16port) Mon problème : J'arrive à connecté eth0 au net, et eth1 au lan. Les PC sur le Lan communiquent. Mais impossible de envoyer une requête vers l'extérieur du réseau (web ou récupération des mails par exemple) Je pêche un peus sur la configuration de iptables. avant de sécuriser, je voudrais au moins pourvoir accèder au net avec toutes mes machines, via ma passerelle. Petite précision, je suis en interface console sur le linux. Pourriez-vous me filer un coup de main pour me dépétrer de tout ça ? Je crois que je dois faire du masquerading et du forarding... Merci de m'orienter !!! AMICALEMENT Manu SITES WEBS Mon site web Officiel (Manu-dpk.net) Ecoutez Radio DPK CONTACT - E-mail : manuli...@manu-dpk.net - Messenger (WLM) : m...@manu-dpk.net - Skype : manu-dpk PS : Pour le respect de l'environnnement, n'imprimez ce mail qu'en cas de nécessité. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/0945CFECB33F43789776886BF1E65CE0@AsusEEPC1011Manu
Re: Xorg error with 2.6.32-5 kernel
On Monday 27 September 2010 06:21 AM, Stephen Powell wrote: On Sun, 26 Sep 2010 14:05:51 -0400 (EDT), Manu Krishnan T.V wrote: I was using Squeeze for a while and recently updated my Kernel to 2.6.32-5. Since then, the graphics won't start. The system is working fine with the older kernel. The Xorg log shows the following error when using the new kernal. (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge (II) Primary Device is: PCI 0...@00:02:0 (EE) intel(0): No kernel modesetting driver detected. (II) UnloadModule: intel (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Can someone help me to get out of this? The complete log and dmesg are at http://aeneous.coolwrks.com/tvm/log-20100926/ Look in directory /etc/modprobe.d for a file called i915-kms.conf. Look at the contents of that file. Does it say options i915 modeset=0 If so, change the 0 to 1 and file it, then shutdown and reboot. If no such file exists, then create it, specifying modeset as 1. It is already set to 1. Any other possibilities? Or shall I downgrade the kernel? -- *Regards, Tvm a.k.a Bizzard http://www.bizzard.info/** *
Xorg error with 2.6.32-5 kernel
Hi, I was using Squeeze for a while and recently updated my Kernel to 2.6.32-5. Since then, the graphics won't start. The system is working fine with the older kernel. The Xorg log shows the following error when using the new kernal. (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge (II) Primary Device is: PCI 0...@00:02:0 (EE) intel(0): No kernel modesetting driver detected. (II) UnloadModule: intel (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Can someone help me to get out of this? The complete log and dmesg are at http://aeneous.coolwrks.com/tvm/log-20100926/ Thanks in advance, -- *Regards, Tvm a.k.a Bizzard http://www.bizzard.info/* **
Re: Dumping terminal contents to a file
Le Mer 8 septembre 2010 18:52, Alois Mahdal a écrit : Hi Debian users, I wonder if there's a simple and universal way to dump output of terminal to a file, particularly for demonstration purposes. not sure if this would do: screendump manu http://manurevah.com -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cc5e766cf765a01d19d8d956ca51bb69.squir...@mail.manurevah.com
update upgrade parc serveurs
Hello, Je gère un parc de plusieurs dizaines de serveurs sous debian stable. A ce jour je mets à jour les serveurs 1 par 1 à la mano. Je souhaite savoir si il existe une solution pour mettre à jour tout le parc serveur depuis un master (taper une seul commande qui s'aplique sur l'ensemble du parc). Connaissez vous une solition correspondant à cette fonction au combien pratique. Merci pour votre savoir. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktim2knmzcz4fe3sdnuhvadtdt82uxt27ph...@mail.gmail.com
Re: update upgrade parc serveurs
Salut Jm J'ai vu pour cron-apt mais je n'ai pas trouvé une commande complete update upgrade (tout est en stable sur mes serveurs donc je pense que l'upgrade ne posera pasp lus de problemes que ça ! Vous avez un retour d'expérience sur cron-apt update upgrade ? Le 19 août 2010 11:45, Jean-Michel OLTRA jm.oltra.antis...@espinasse.net a écrit : Bonjour, Le jeudi 19 août 2010, Manu a écrit... Je gère un parc de plusieurs dizaines de serveurs sous debian stable. A ce jour je mets à jour les serveurs 1 par 1 à la mano. Je souhaite savoir si il existe une solution pour mettre à jour tout le parc serveur depuis un master (taper une seul commande qui s'aplique sur l'ensemble du parc). Connaissez vous une solition correspondant à cette fonction au combien pratique. J'utilise cron-apt pour les avis de mises à jour, puis cssh pour les manipulations proprement dites. -- jm A.E.L. Sarl (R.C.S CASTRES 490843240) http://www.spidboutic.fr -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100819094517.gj4...@espinasse -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimtk1g_u_h2hwy2az_wmvhrk4wo5m_sxgtbs...@mail.gmail.com
Envoi de mails archie haute dispo avec HAProxy ?
Bonjour la liste, Je vous contact afin d’avoir vos avis face à ‘LA’ solution technique’ qu’il vous semble la plus adaptée au cas que je vais vous présenter ci-dessous. Je suis en train de monter une architecture à base de HAProxy. L’architecture est montée en 3 groupes 1/ Un prémier réseau frontal ayant accès à internet. 2/ Un Réseau local où se trouvent les serveurs web (appellés node) 3/ Un sous réseau au réseau local ouse trouvent les données (serveur de fichiers, serveur sql, etc) Je résume : 1/ le serveur HAProxy est en frontal et a une IP publique et a accès à internet. 2/ Sous le proxy on passe en réseau local pour les nodes web (adresse 192.168.5.0/24) 3/ Sous les nodes web on passe sous un autre sous réseau en 192.168.60.0/24 (serveur de fichiers, SQL, etc … Ci-dessous un lien où vous trouverez le schéma de l’architecture en .pdf - (j'ai fais pour vous vite fait :-) http://marima25.free.fr/archie4.pdf Sur les nodes web (sous réseau 192.168.5.0/24) sont installés : apache2, php5, suphp, postfix en relayhost La question : J’ai besoin de savoir comment procéder pour que mes nodes puissent envoyer des mails sur le réseau internet ayant elle-même pas accès à internet (les nodes passent par le serveur frontal HAProxy) ? Merci pour vos lumières ! Cordialement, Creatyto -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinogjbggatcijwaxsqiedetbxk2nc1fu6+ol...@mail.gmail.com
icedove : pas de nouveaux messages au lancement
Bonjour, Avec Icedove, au démarrage de celui-ci, je n'ai pas de nouveaux messages. Pourtant, cette option est cochée dans les paramètres du serveur. Bref, ça ne marche pas. Je suis tout seul ? -- Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c426636.2010...@vif.ca
Re: what's your favourite FLOSS?
audio player: xmms2, amarok cd-ripper: desktop OR window manager: openbox, xfce4 DBMS: mysql development: g++, python disc burner: k3b e-mail client: mutt file manager: thunar finance: (there is not floss named bailout unfortunately AFAIK) ftp client: lftp games: xmoto image editor: gimp image viewer: qiv instant messenger: finch mathematics: R, python, maxima misc utilities: screen, dvtm, remind, wyrd p2p: amule, deluge package manager: apt pdf-reader: xpdf, kpdf spreadsheet: oocalc tag editor: terminal emulator: urxvt text editor: vim video player: mplayer web browser: iceweasel word-processor: latex non-free: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Missing repeating keypresses in X
On Wed, Sep 3, 2008 at 3:41 PM, Martin [EMAIL PROTECTED] wrote: Hello, I have a strange problem with Xorg: Installed lenny today from the daily built netinst, all went fine. apt-get install xorg xmonad ## installed nvidia drivers from nvidia.com as I have dualhead and a (until yet) working xorg.conf Now when I open a terminal (xterm) and press e.g. a keep holding it down I don't get repeated a's in my term. It's like only the first keypress is recognized. To turn repeat on, run: xset r on You can man xset for more manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
iceweasel random crash
Hi all, After an upgrade to iceweasel 3 (i'm running sid), iceweasel crashed like every a few minutes and it's just unusable. I managed to run strace iceweasel and the following is the line before it crashed: 10:51:25 madvise(0xab7a4000, 28672, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab78b000, 61440, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab76d000, 110592, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab761000, 40960, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab751000, 61440, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab749000, 28672, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab724000, 40960, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab71f000, 4096, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab713000, 36864, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab70b000, 4096, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab706000, 4096, 0x4 /* MADV_??? */) = 0 10:51:25 madvise(0xab603000, 262144, 0x4 /* MADV_??? */) = 0 10:51:25 --- SIGSEGV (Segmentation fault) @ 0 (0) --- 10:51:25 unlink(/home/manu/.mozilla/firefox/021o4gkw.default/lock) = 0 10:51:25 rt_sigaction(SIGSEGV, {SIG_DFL}, NULL, 8) = 0 10:51:25 rt_sigprocmask(SIG_UNBLOCK, [SEGV], NULL, 8) = 0 10:51:25 tgkill(18426, 18426, SIGSEGV) = 0 10:51:25 --- SIGSEGV (Segmentation fault) @ 0 (0) --- 10:51:25 +++ killed by SIGSEGV +++ Any clue what went wrong? manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ps2pdf problem on sid
On Wed, Jun 25, 2008 at 1:14 PM, Florian Kulzer [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: [ Please try to turn off the HTML part of your messages. ] On Tue, Jun 24, 2008 at 20:28:53 -0400, Manu Hack wrote: Hi all, I'm running sid on two different machines. I just update/upgrade both machines. However, I can run ps2pdf successful on one, but get error on the other. The error I get is $ ps2pdf gpcard.ps Unrecoverable error: typecheck in readonly Operand stack: _cjkv_base_util --nostringval-- 0 The file I used is http://www.gnuplot.info/docs_4.0/gpcard.ps.gz Compare the output of these commands on the two machines: gs -v both show $ gs -v GPL Ghostscript 8.62 (2008-02-29) Copyright (C) 2008 Artifex Software, Inc. All rights reserved. dpkg -S bin/ps2pdf both show $ dpkg -S bin/ps2pdf ghostscript: /usr/bin/ps2pdfwr ghostscript: /usr/bin/ps2pdf12 ghostscript: /usr/bin/ps2pdf13 ghostscript: /usr/bin/ps2pdf14 ghostscript: /usr/bin/ps2pdf I think somehow the gs package is corrupted in one of my machine. I try removing it and reinstalling it again, it works fine now. Thanks for the help! Manu
ps2pdf problem on sid
Hi all, I'm running sid on two different machines. I just update/upgrade both machines. However, I can run ps2pdf successful on one, but get error on the other. The error I get is $ ps2pdf gpcard.ps Unrecoverable error: typecheck in readonly Operand stack: _cjkv_base_util --nostringval-- 0 The file I used is http://www.gnuplot.info/docs_4.0/gpcard.ps.gz Thanks a lot.
Re: iceweasel est bien lent
Le 10 juin 2008 21:15, Christian Debarbieri [EMAIL PROTECTED] a écrit : -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Pour info, Je suis en Debian 32bits Shubbaka a écrit : Bonsoir à la liste et ses habitants. Juste une petite question, pas très grave. Avec Sid certains ont ils remarqué que iceweasel ramait pas mal, 1 2 s pour se fermer, depuis ce soir il bloque sur certaines pages 10 15 s avant de repartir, et il bloque tout pendant ce temps ? J'ai bien peu de ram mais bon avant (10 jours) tout allait bien. Voilà. Fab -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkhO0uYACgkQXfnFyCNJxzaUvQCfQyFuLfuFW+jZIzULEactID14 FGEAn2OoSlGdIfDjKUvoP2pKBiy82Za/ =IUNX -END PGP SIGNATURE- -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Bonjour, J'ai le même problème sou Firefox 3b5 sous ubuntu 64 bits mais pas encore vu sous iceweasel 2..14 sous debian testing 32 bit. J'avais ça en pire, après une install de l'extension Flashgot qui sans une configuration appropriée pour décocher la détection automatique du gestionnaire de téléchargement, lançait Wine, ce qui prenait un temps fou. Ce problème est règlé mais j'ai toujours des gros ralentissement de 2 à 7 s.
Re: [HS] démarrer sur une distrib configurée pour une autre CM
Le 29 mai 2008 20:21, Gaëtan PERRIER [EMAIL PROTECTED] a écrit : Le Thu, 29 May 2008 12:36:59 +0200 [EMAIL PROTECTED] a écrit: Salut, J'ai un petit de souci de livraison sur un proc, et du coup mon PC principal n'en a plus. Je voulais savoir si c'est possible de prendre le disque dur, de le coller dans une autre machine, relativement similaire (même proc, même lecteurs, mais CM différente : on passerait de Gigabyte GA-K8N à Asrock) et de booter sur ma distrib ? Sinon, il me reste la solution live-CD? mais c'est moins pratique dans le cas qui me concerne. Merci. Pas de soucis si ton noyau est un standard Debian et surtout si tu gardes le même type de proc sinon il faudrait juste installer un noyau pour le nouveau proc avant. Ma testing a été installé il y plusieurs années et a migré 3 fois de machine (avec changement de proc) sans aucune réinstallation. Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Je l'ai déjà fait aussi avec changement de processeur sans rien réinstaller. -- Manu
quid du filtre antispam de icedove
Bonjour à tous, Le filtre antispam de icedove me convenait bien et c'est une fonctionnalité qui n'est plus disponible en debian stable. Savez-vous pourquoi et si on la récupérera un jour ? Faut-il revenir à thunderbird ? Merci pour l'info. Manu
Re: apt-get dist-upgrade failure
Sorry guys, haven't been able to use that box until now. On 5/16/08, Mike Bird [EMAIL PROTECTED] wrote: On Fri May 16 2008 18:05:57 Raj Kiran Grandhi wrote: Manu Hack wrote: is so weird that even sudo rm /usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.mo said I don't have the permission to do so. (Operation not permitted) Try becoming root with 'sudo -i' and remove that file. root should be able to delete any regular file irrespective of whether it is being used or not. Nobody tells root he can't do something (outside of some special directories). You should suspect something seriously wrong if your system behaves otherwise. That's not quite true. Attributes such as immutable are sometimes set by malware or disk errors. OP please show us the output of the following two commands: file /usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.mo /usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.mo: GNU message catalog (little endian), revision 0, 106 messages lsattr -d /usr/share/locale/tr/LC_MESSAGES suSDiadAc-ZXEj-tT- /usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.m What's happening? Manu
Re: apt-get dist-upgrade failure
On Fri, May 23, 2008 at 6:07 PM, Mike Bird [EMAIL PROTECTED] wrote: On Fri May 23 2008 13:54:59 Manu Hack wrote: That's not quite true. Attributes such as immutable are sometimes set by malware or disk errors. OP please show us the output of the following two commands: file /usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.mo /usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.mo: GNU message catalog (little endian), revision 0, 106 messages lsattr -d /usr/share/locale/tr/LC_MESSAGES suSDiadAc-ZXEj-tT- /usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.m What's happening? The file attributes are complete garbage. Probably a minor hardware glitch. Remove all attributes and try the upgrade again. Here's the command, and yes the = is surrounded by spaces. chattr = /usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.mo It works! Debian is the best! Thanks a lot! Manu
apt-get dist-upgrade failure
Hi, I decided to upgrade my etch box to lenny/sid but an apt-get dist-upgrade got stuck. Please let me know what could be done here. Thanks a lot. Manu $ sudo apt-get update Hit http://ftp.debian.org etch Release.gpg Hit http://ftp.debian.org testing Release.gpg Hit http://ftp.debian.org etch Release Hit http://security.debian.org etch/updates Release.gpg Hit http://ftp.debian.org testing Release Hit http://security.debian.org etch/updates Release Ign http://ftp.debian.org etch/main Packages/DiffIndex Ign http://ftp.debian.org etch/main Sources/DiffIndex Hit http://ftp.debian.org etch/main Packages Hit http://ftp.debian.org etch/main Sources Hit http://ftp.debian.org testing/main Packages/DiffIndex Hit http://ftp.debian.org testing/contrib Packages/DiffIndex Hit http://ftp.debian.org testing/non-free Packages/DiffIndex Ign http://security.debian.org etch/updates/main Packages/DiffIndex Ign http://security.debian.org etch/updates/main Sources/DiffIndex Hit http://security.debian.org etch/updates/main Packages Hit http://security.debian.org etch/updates/main Sources Reading package lists... Done $ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree... Done You might want to run `apt-get -f install' to correct these. The following packages have unmet dependencies: libbonobo2-0: Depends: libbonobo2-common (= 2.22.0-1) but 2.14.0-3 is installed E: Unmet dependencies. Try using -f. $ sudo apt-get -f dist-upgrade Reading package lists... Done Building dependency tree... Done Correcting dependencies... Done Calculating upgrade... Done The following packages will be REMOVED: libcamel1.2-8 libebook1.2-5 libgssapi2 libnss3-0d libopal-2.2.0 libpci2 libpt-plugins-alsa libpt-plugins-v4l libssp0 The following NEW packages will be installed: acpi-support-base bsd-mailx eject filters g++-4.2 gcc-4.2 grub-common gs gs-common gs-gpl hal hal-info kdebase-bin-kde3 libavcodec1d libavformat1d libavutil1d libbind9-30 libc-ares1 libcamel1.2-11 libccid libcdio7 libcrypto++7 libcurl3-gnutls libdevmapper1.02.1 libdirectfb-1.0-0 libdirectfb-extra libdmx1 libdns32 libebml0 libebook1.2-9 libecal1.2-7 libedata-cal1.2-6 libegroupwise1.2-13 libfaad0 libflac8 libfreebob0 libgdata-google1.2-1 libgdata1.2-1 libgif4 libgssglue1 libiec61883-0 libilmbase6 libisc32 libisccc30 libisccfg30 libiso9660-5 libiw29 libjack0 libjasper1 libltdl3 liblwres30 liblzo2-2 libmatroska0 libnetpbm10 libnss3-1d libobparser16 libobrender16 libopal-2.2 libopenexr6 libpam-gnome-keyring libpci3 libpcsclite1 libpostproc1d libpq5 libpt-1.10.10 libpt-1.10.10-plugins-alsa libpt-1.10.10-plugins-v4l librarian0 libsamplerate0 libsmbios-bin libsmbios1 libsmbiosxml1 libsnack2 libsoup2.4-1 libsox-fmt-alsa libsox-fmt-base libsox0 libspeexdsp1 libsplashy1 libssh2-1 libstdc++6-4.2-dev libts-0.0-0 libx86-1 linux-image-2.6.24-1-686 netcat-traditional netpbm nvclock openssh-blacklist pcscd pm-utils psfontmgr python-sepolgen tcl8.5 tk8.5 uuid-runtime vim-gnome x11-apps x11-session-utils x11-utils x11-xfs-utils x11-xkb-utils x11-xserver-utils xauth xinit xorg-docs xserver-xorg-video-intel The following packages will be upgraded: acpi acpi-support acpid alsa-base alsa-tools alsa-utils amsn amule amule-common anacron apmd at bc bind9-host bootchart busybox ca-certificates chameleon-cursor-theme comixcursors console-tools cowsay cpp-4.1 cpufrequtils cron crystalcursors cyrus-sasl2-doc dc debfoster debian-archive-keyring dhcp3-client dhcp3-common dictionaries-common dmidecode dnsutils docbook-xml docker dselect ed ekiga evolution-data-server evolution-data-server-common exim4-base exim4-config exim4-daemon-light exuberant-ctags feh finger g++ g++-4.1 galeon galeon-common gcc gcc-4.1 gcc-4.1-base giblib1 gnome-doc-utils gnome-keyring gnu-efi gnupg gpgv grub grub-splashimages gsfonts gzip hdparm hibernate hicolor-icon-theme hostname hotkey-setup iamerican ibritish iceweasel imlib-base imlib11 info initramfs-tools initscripts installation-report iptables iputils-ping ispell kdebase-bin kdebase-data kdelibs-data kdelibs4c2a kdm klibc-utils klogd laptop-detect less lesstif2 lftp liba52-0.7.4 libaa1 libapm1 libapr1 libarts1c2a libartsc0 libaudio2 libavahi-qt3-1 libblkid1 libbonobo2-common libcaca0 libcdparanoia0 libconsole libcpufreq0 libcucul0 libcurl3 libdb4.2 libdb4.3 libdb4.4 libdc1394-13 libdvbpsi4 libdvdnav4 libdvdread3 libedata-book1.2-2 libedit2 libevent1 libflash-mozplugin libflash0c2 libfontenc1 libfribidi0 libgc1c2 libgcj7-jar libgd2-noxpm libglibmm-2.4-1c2a libgnome-desktop-2 libgnomecups1.0-1 libgnomeprint2.2-0 libgnomeprint2.2-data libgnomeprintui2.2-0 libgnomeprintui2.2-common libgnutls13 libgpmg1 libgsm1 libgtk2.0-bin libgtop2-common libhtml-tagset-perl libidn11 libimlib2 libjack0.100.0-0 libklibc liblcms1 libldap2 liblircclient0 liblockfile1 liblogfile-rotate-perl liblua50 liblualib50 libmad0 libmodplug0c2 libmpeg2-4 libmysqlclient15off libnfsidmap2 libogg0
Re: apt-get dist-upgrade failure
On Fri, May 16, 2008 at 5:06 PM, Preston Boyington [EMAIL PROTECTED] wrote: Manu Hack wrote: Hi, I decided to upgrade my etch box to lenny/sid but an apt-get dist-upgrade got stuck. Please let me know what could be done here. Thanks a lot. Manu i wonder if you could do this: dpkg -i --force-overwrite /var/cache/apt/archives/libbonobo2-common_2.22.0-1_all.deb i've had to use --force-overwrite from time to time... Forgot to reply all. Still getting the same error of dpkg: error processing /var/cache/apt/archives/libbonobo2-common_2.22.0-1_all.deb (--unpack): unable to make backup link of `./usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.mo' before installing new version: Operation not permitted dpkg-deb: subprocess paste killed by signal (Broken pipe) Got the same error with apt-get -f install And the file /usr/share/locale/tr/LC_MESSAGES/libbonobo-2.0.mo is so weird that even sudo rm /usr/share/locale/tr/LC_MESSAGES/ libbonobo-2.0.mo said I don't have the permission to do so. (Operation not permitted) Manu
Squid Dansguardian Shorewall : comment faire un proxy transparent ?
bonjour, J'ai installé Squid (port 3128) avec dansguardian (port 8080). Tout fonctionne bien, mais je n'arrive pas bien à comprendre comment configurer shorewall pour que le proxy soit transparent. Ma config de shorewall (version 4.0.6) est calquée sur le One-interface livré en exemple : - je n'ai qu'une interface - j'ai 2 zones = fw et net Je voudrais savoir et comprendre (ça serait meux !) ce que je dois mettre dans le fichier rules de shorewall. Merci
Re: How do I change cursor/mouse pointer?
On Thu, May 8, 2008 at 9:02 PM, Dennis G. Wicks [EMAIL PROTECTED] wrote: NN_il_Confusionario wrote the following on 05/08/2008 10:48 AM: On Thu, May 08, 2008 at 08:11:26AM -0500, Dennis G. Wicks wrote: NN_il_Confusionario wrote the following on 05/07/2008 09:46 AM: less /usr/share/doc/big-cursor/README.Debian (this is a useful general rule) that is nowhere near intuitive! many debian packages have documentation in /usr/share/doc/$PACKAGENAME and often there is a README.Debian (or similar names) with debian specific post-installation instructions. new session for a new user and I still have the same small cursors and mouse pointers. you do not need a new session but a new istance of the X server (or possibly not, as the above file explains). If you are using gdm / kdm / xdm / wdm ... (as opposed to startx), then a logout does NOT start a new istance of the X server, since the display manager ?dm keeps alive the old istance of X. You can restart the display manager /etc/init.d/gdm restart and/or kill the X server (and so lose all unsaved data in your session) from the X server itself (unless disabled in xorg.conf): altctrlbackspace with a console command: killall X and/or log in in console and manually start a new X istance: startx -- :1 OK, I started a third instance by logging on a third linux user on a console (tty3) and running startx -- :2 and there was no difference in the new session. I have two other instances(?) of x-session-manager running. Do I have to get all of these shutdown for the change to take effect? Okay, let me try one more time. If you have ooffice, try the following: sudo update-alternatives --config x-cursor-theme choose something dfferent from what you're using. Then run ooffice. On the area of the openoffice windows, hope you can see the dfference. I don't know exactly why, but on my machine after running update-alternatives, the cursor won't change immediately but if I run ooffice, after that I can always see the change on the openoffice windows. Manu
Re: How do I change cursor/mouse pointer?
On Wed, May 7, 2008 at 8:50 AM, Dennis G. Wicks [EMAIL PROTECTED] wrote: H.S. wrote the following on 05/07/2008 12:26 AM: Dennis G. Wicks wrote: Manu Hack wrote the following on 05/06/2008 01:11 PM: Sorry, I tried both suggestions and I don't see any changes of differences in anything. Dennis Could you list the steps and actions you tried? As per your previous: On debian Lenny: {~}$ apt-cache search cursors big-cursor - larger mouse cursors for X comixcursors - X11 mouse theme with a comic feeling crystalcursors - X11 mouse theme with the crystal lookfeel dmz-cursor-theme - Style neutral, scalable cursor theme icoutils - Create and extract MS Windows icons and cursors libxcursor1 - X cursor management library oxygencursors - Oxygen mouse cursor theme python-psycopg2 - Python module for PostgreSQL uqm - The Ur-Quan Masters - An inter-galatic adventure game uqm-russian - Russian addon for 'The Ur-Quan Masters' game uqm-content - The Ur-Quan Masters - Game data files Then aptitude install big-cursor Nothing changed so I went searching through Gnome menus for anything to do with mouse or cursor and found nothing that would give me any choices to change cursors or mouse pointers. Then per per other response from Manu: update-alternatives --config x-cursor-theme Chose a couple different ones and again nothing changed. Again I could find nothing in Gnome that allowed me to change cursors or mouse pointers. Is there something else I need to do? I'm using openbox, and it works for me. But note that the change is not immediate. While it's not necessary to restart X, did you try restarting X and see if it changes after that? Manu [EMAIL PROTECTED]
Re: How do I change cursor/mouse pointer?
On Tue, May 6, 2008 at 1:20 PM, Dennis G. Wicks [EMAIL PROTECTED] wrote: Greetings; Search as I may I can not find how to do this. I am running gnome and a hi-res screen. My cursor and mouse pointer are too small to see easily on the screen. How do I make them bigger? sudo apt-get install chameleon-cursor-theme (or any other theme you like) sudo update-alternatives --config x-cursor-theme and choose the one you like. For example I chose /usr/share/icons/Chameleon-Pearl-Large/cursor.theme, which is large enough for me. Manu
Re: Gnome multi langage ?
Edi Stojicevic a écrit : * Emmanuel Kasper [EMAIL PROTECTED] [2008-04-24 11:20:45 +0200] wrote : Bonjour Salut, Quels paquets dois je installer pour avoir gnome dans differentes langues ( avec choix de la langue de la session via gdm ) ? Un apt-cache search gnome german ne me renvoie pas grand chose de pertinent. Il faut configurer tes locales : dpkg-reconfigure locales Donc c'etait bien dpkg-reconfigure locale pour generer les locales, qui peuvent etre ensuite selectionee pour la session via le chooser de gdm. donnent ensuite acces a un bureau gnome en francais/polonais/allemand. Pour openoffice et iceweasel installer les packages i10n correspondants. Manu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian is losing its users
Now many people believe what google says and let google think for themselves. Dangerous. manu
Re: vertical scroll on my touchpad not working
On Mon, Mar 03, 2008 at 10:11:45PM -0700, Dave Thayer wrote: On Fri, Feb 29, 2008 at 01:42:15PM -0500, Manu Hack wrote: Hi I've installed debian amd64 on a Toshiba laptop A215-S7413. I failed to get the touchpad vertical scrolling to work (basic functions work fine). Here is my /etc/X11/xorg.conf: I just rebuilt my xorg.conf on my old laptop due to a fairly bizarre problem involving man running away (100% cpu), but only on urxvt terms with over 36 lines. There was so much cruft in my xorg.conf that I decided to start from scratch, which solved my problem. At any rate, I had to re-install the synaptics driver, and one difference I noticed with your xorg.conf is you have no ServerLayout stanza at the end. Here's mine: Section ServerLayout IdentifierDefault Layout Screen Default Screen InputDeviceGeneric Keyboard InputDeviceSynaptics Touchpad InputDevice USB Mouse CorePointer EndSection That works, after adding the serverlayout section. Thanks a lot guys! Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
vertical scroll on my touchpad not working
Hi I've installed debian amd64 on a Toshiba laptop A215-S7413. I failed to get the touchpad vertical scrolling to work (basic functions work fine). Here is my /etc/X11/xorg.conf: Section Module Loadsynaptics EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option AutoRepeat 195 35 Option XkbRules xorg Option XkbModel pc104 Option XkbLayout us Option XkbOptions ctrl:nocaps,altwin:left_meta_win EndSection Section InputDevice Identifier Synaptics TouchPad Driver synaptics Option Device /dev/psaux Option Protocol auto-dev Option SendCoreEvents true Option SHMConfig on Option VertEdgeScroll on Option HorizEdgeScroll on EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/mice Option Protocol ImPS/2 Option Emulate3Buttons true EndSection Section Device Identifier Configured Video Device EndSection Section Monitor Identifier Configured Monitor EndSection Section Screen Identifier Default Screen Monitor Configured Monitor EndSection I looked at /usr/share/doc/xserver-xorg-input-synaptics/trouble-shooting.txt.gz and found that number 5 may be talking about my problem: 5. Check that the synaptics driver is properly loaded by the X server - The X log file is usually called /var/log/XFree86.0.log or /var/log/Xorg.0.log. It should contain something like this: (II) LoadModule: synaptics (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.o (II) Module synaptics: vendor=X.Org Foundation compiled for 4.3.99.902, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 If the LoadModule line is missing, you probably forgot to add Load synaptics to the Module section in the X config file, or you modified the wrong config file. Some systems that have been upgraded from XFree86 to Xorg or from XFree86 3.x to XFree86 4.x can have multiple config files in the /etc/X11/ directory, but only one is used. Next, check that the log file also contains a line like this: (II) Synaptics touchpad driver version 0.13.4 If there is no such line, there is probably a binary compatibility problem between the synaptics driver and the X server. Possible fixes: 1. Try upgrading to the latest synaptics driver. 2. Try installing the X SDK package if it is available for your version of X. (In Fedora Core 2, that package is called xorg-x11-sdk-6.7.0-2.i386.rpm.) Then re-compile the synaptics driver and try again. 3. Make sure the driver is compiled with the same compiler version as the X server. So I have on my /var/log/Xorg.0.log (II) LoadModule: synaptics (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor=X.Org Foundation compiled for 4.3.99.902, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 but I couldn't find (II) Synaptics touchpad driver version 0.13.4 (or some other version). Unlike on my other laptop, I can see this line among other options related to synaptics. Also, if I run qsynaptics it said please install driver so I suppose the driver may not be installed properly. So regarding the 3 suggestions from /usr/share/doc/xserver-xorg-input-synaptics/trouble-shooting.txt.gz, I'm not exactly sure what to do on Debian. Any suggestions would be welcome. Thanks a lot. Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cpulimit
On Jan 23, 2008 8:41 AM, Douglas A. Tutty [EMAIL PROTECTED] wrote: On Wed, Jan 23, 2008 at 12:20:48AM -0500, Manu Hack wrote: Is there any command like nice so that I can run a command with a cpu limit of at most x%? cpulimit is close to my need but it can't be invoked like nice, i.e., put it before the command I want to run like cpulimit -l 50 some_commands Short answer: no. You mean the app uses e.g. max 50% and if nothing else is running the CPU is then 50% idle? There was a long thread on OpenBSD (where people discuss kernel internals) that concluded that UNIX has never had a scheduler that could do this. What problem are you trying to solve where you think that this is the answer? The problem is that I'm using a laptop but somehow (I don't know exactly why) recently when I run some cpu-intensive and time consuming programs it caused the cpu too hot and an automatic shutdown is resulted. I want to keep the CPU usage low for those programs to avoid the forced shutdown. In the mean while I'm also looking for an external CPU cooler. :) Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cpulimit
On Jan 23, 2008 10:57 AM, Douglas A. Tutty [EMAIL PROTECTED] wrote: On Wed, Jan 23, 2008 at 10:16:56AM -0500, Manu Hack wrote: The problem is that I'm using a laptop but somehow (I don't know exactly why) recently when I run some cpu-intensive and time consuming programs it caused the cpu too hot and an automatic shutdown is resulted. I want to keep the CPU usage low for those programs to avoid the forced shutdown. In the mean while I'm also looking for an external CPU cooler. :) I've never used it but what about CPU throttling? There's some package like CPU utils. Slow down the CPU and it runs cooler. Or complain to the people that made a laptop that can't run at advertized spec. Is it clean? Is the fan working? Is it on a hard surface or a soft (insulating) one? The fan is working (I can tell as it's very noisy when I'm running programs) and it's on a wood table. Will look into the CPU throttling stuff later. Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cpulimit
On Jan 23, 2008 11:48 AM, Douglas A. Tutty [EMAIL PROTECTED] wrote: On Wed, Jan 23, 2008 at 11:33:09AM -0500, Manu Hack wrote: On Jan 23, 2008 10:57 AM, Douglas A. Tutty [EMAIL PROTECTED] wrote: I've never used it but what about CPU throttling? There's some package like CPU utils. Slow down the CPU and it runs cooler. Or complain to the people that made a laptop that can't run at advertized spec. Is it clean? Is the fan working? Is it on a hard surface or a soft (insulating) one? The fan is working (I can tell as it's very noisy when I'm running programs) and it's on a wood table. Will look into the CPU throttling stuff later. Just because a fan is noisy doesn't mean its moving air. Acutally, it could mean that the bearing is shot or the fan-shaft interface is slipping. The motor may be going round full speed and the bios thinks that all is fine but the fan is moving slowly. What is the temp of the air coming out of the laptop? It should be not much above 25 C. I don't have a thermometer handy :) but the air coming out of the laptop is pretty hot sometimes. What's the implication? My fan is broken? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
cpulimit
Hi all Debian users, Is there any command like nice so that I can run a command with a cpu limit of at most x%? cpulimit is close to my need but it can't be invoked like nice, i.e., put it before the command I want to run like cpulimit -l 50 some_commands Any input is appreciated. Thanks! Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Anyone using Debian on notebook?
On Dec 18, 2007 11:06 AM, Ivan Savcic [EMAIL PROTECTED] wrote: On Dec 16, 2007 5:50 AM, js [EMAIL PROTECTED] wrote: Thank you all! Conclusion: Pros: - It's Debian! - It's Free! - Great environment for Programming (better than ssh to linux development style) - More open source softwares support Cons: - might harder to get your devices working. wifi, printer, dual display, iPod etc. - lost lots of OSX goodies (beautiful fonts, expose, widgets, spotlight, sleep mode etc.) - lost vendor's support - not bleeding edge enough for desktop role (compare to Ubuntu) how much better is Ubuntu compared with Sid? Recently I have a hard time trying to install Debian-amd64 on a Toshiba A215-S7413 (cannot use the ATI driver to use X, need to use vesa instead, no sound with hours of googling, decided to stop and take a break before going on working on the wireless card, I couldn't even shutdown properly http://www.mail-archive.com/[EMAIL PROTECTED]/msg31118.html). Before I have already installed Debian-i386 on two Toshiba without any major problems (I don't use hibernate or suspense so didn't bother to try). Is it because of the amd64 version or just because the combination of the wireless/sound/video card is not debian-friendly? I should have been more careful picking the right laptop though (maybe before having two easy experience on Toshiba laptops made me think all Toshiba laptops are easy with debian ... ). well, just want to share some experience ... Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [OT] LaTeX
On Nov 25, 2007 1:39 PM, Michael Pobega [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sun, Nov 25, 2007 at 12:47:02PM -0500, Rick Pasotto wrote: I installed vim-latexsuite which installed vim-addon-manager. Then I entered 'vim-addons install latex-suite' to enable it. Now when I enter 'vim-addons show' I get: Addon: latex-suite Status: broken Description: comprehensive set of tools to view, edit, and compile LaTeX documents What is it that is broken? How do I fix it? I have the same problem after following your instructions; Should this be filed as a bug report against vim-latexsuite? I have been unable to get the suite working thus far, personally. I forgot how I installed it but I found it very useful although it behaves slightly differently after vim upgraded from 6 to 7. Try downloading the suite directly from their website and just put it in you .vim. Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: what's your favourite FLOSS?
I use Kpdf most of the time but xpdf has a smaller footprint (both memory and disk space requirements). I have Kpdf on my main Athlon box and xpdf on my PII. I can view a pdf directly on the PII with xpdf or I can ssh -X into my athlon box and view it with Kpdf if I set Kpdf for poor performance. Its stores rendered pages in the Xorg memory footprint on the PII. If I'm really tight for memory, I'll run xpdf on the Athlon and it will keep rendered pages on the Athlon. I also found kpdf outperform xpdf for big files. But the only reason I still keep using xpdf is that I can't set the vi key-binding (hjkl is enough) in kpdf. Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xdvi shows no font
Hi, I'm using sid and usually I don't need to configure the font in order for xdvi to function properly. But now suddenly xdvi shows no font (I have file with some graphics it can show the graphics somehow but no words). So what should I do now? Thanks. Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
bash reverse menu-complete
Hi, I was changing the key bindings in bash. I found the description of menu-complete in bash reference manual: menu-complete Similar to complete, but replaces the word to be completed with a single match from the list of possible completions. Repeated execution of menu-complete steps through the list of possible completions, inserting each match in turn. At the end of the list of completions, the bell is rung (subject to the setting of \Bbell-style) and the original text is restored. An argument of n moves n positions forward in the list of matches; a negative argument may be used to move backward through the list. This command is intended to be bound to TAB, but is unbound by default. so I added a line in .bashrc bind 'TAB:menu-complete' which works perfectly. Now the question is: how to bind shift + tab to move backward? Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: gnome alarm clock / egg timer?
On 10/9/07, Tyler MacDonald [EMAIL PROTECTED] wrote: Is there some sort of simple application out there for GNOME that acts like an egg timer? You know, i enter in an amount of time, can watch it tick down, and have it make some sort of loud obnoxious sound when it's done? Maybe not exactly what you wanted but on KDE kteatime works for me. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Cannot run iceweasel on remote host
On 10/3/07, Liam O'Toole [EMAIL PROTECTED] wrote: On Wed, 03 Oct 2007 18:08:29 +0530 Raj Kiran Grandhi [EMAIL PROTECTED] wrote: Hi, I am facing a weird problem when trying to run iceweasel on a remote host through an ssh session. I have logged into the remote host using ssh -Y remote and at the prompt of the remote host, I ran iceweasel. However it appears that a local instance of iceweasel is started. There is no iceweasel/firefox process at all on the remote host. The only way I could get iceweasel to run on the remote host is by closing all instances of iceweasel already running on the localhost. Is something wrong? No, it's a feature :-) If not, how do I run separate instances of iceweasel concurrently? Invoke iceweasel on the remote host by issuing the command 'iceweasel -no-remote'. It doesn't work for me. It still gave me a box saying: Iceweasel is already running, but is not responding. To open a new window, you must first close the existing Iceweasel process, or restart your system. Any clue? Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: resize the partition with /
On 10/1/07, Raj Kiran Grandhi [EMAIL PROTECTED] wrote: So I'd like to resize hda2 but I can't as it said I need to unmount hda2 before resizing. People suggest using a live CD but it's not possible with my old laptop (I didn't even install etch using CD, I can only install etch via goodbyemicrosoft.com). USB boot is also not available. If a couple of reboots is ok for you, the following method might work. Yes, and thanks a lot for the instruction. You can use 'dd' to clone hda2 to hda1. Boot your system with init=/bin/bash. When you get to the bash prompt, do bash# dd if=/dev/hda2 of=/dev/hda1 When that completes, you would have your installation available on both the partitions. The 5GB hda1 would contain a filesystem that is only 1GB large. Restart your system. You would boot normally with a 1GB root. Edit /boot/grub/menu.lst and add an entry for the linux on hda1. set root to (hd0,0) and append root=/dev/hda1 for the kernel line of the new entry. mkdir /tmp/newroot; mount /dev/hda1 /tmp/newroot Edit the file /tmp/newroot/boot/grub/menu.lst and replace (hd0,1) with (hda0,0) and root=/dev/hda2 with root=/dev/hda1. Similarly fix the root filesystem entry in /tmp/newroot/etc/fstab by changing /dev/hda2 to /dev/hda1. Now you should be able to boot into either of your two partitions. So I got two grub/menu.lst, but how grub knows which one to read (one is hda1 and one is hda2)? Once you have satisfied yourself that both are working, boot into your 1GB partition, and resize hda1. The command resize2fs /dev/hda1 should be sufficient. Restart into the 5GB parition and now you would have a 5GB root with over 4GB free space. Run grub-install /dev/hda so that grub can load itself from the new location. You can now copy over your home directory from the 1GB partition and continue using hda1. If you wish you format hda2 and mount it as /home. Feel free to post any problems you may have and make sure you take a backup of important files before proceeding. Finally I followed your instruction and now I got what I wanted. Really thanks a lot and hopefully this can help others too. (not to mention I learned a lot!) :) Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: resize the partition with /
On 10/4/07, Raj Kiran Grandhi [EMAIL PROTECTED] wrote: Manu Hack wrote: If a couple of reboots is ok for you, the following method might work. Yes, and thanks a lot for the instruction. You can use 'dd' to clone hda2 to hda1. Boot your system with init=/bin/bash. When you get to the bash prompt, do bash# dd if=/dev/hda2 of=/dev/hda1 When that completes, you would have your installation available on both the partitions. The 5GB hda1 would contain a filesystem that is only 1GB large. Restart your system. You would boot normally with a 1GB root. Edit /boot/grub/menu.lst and add an entry for the linux on hda1. set root to (hd0,0) and append root=/dev/hda1 for the kernel line of the new entry. mkdir /tmp/newroot; mount /dev/hda1 /tmp/newroot Edit the file /tmp/newroot/boot/grub/menu.lst and replace (hd0,1) with (hda0,0) and root=/dev/hda2 with root=/dev/hda1. Similarly fix the root filesystem entry in /tmp/newroot/etc/fstab by changing /dev/hda2 to /dev/hda1. Now you should be able to boot into either of your two partitions. So I got two grub/menu.lst, but how grub knows which one to read (one is hda1 and one is hda2)? Grub will read the menu.lst from the partition that contained /boot/grub/menu.lst when grub-install was run. So if I want grub to read the menu.lst from hda1, I should boot in using hda1 and run grub-install /dev/hda1 and then supposedly I can use hda2 for other storage? Feel free to post any problems you may have and make sure you take a backup of important files before proceeding. Finally I followed your instruction and now I got what I wanted. Really thanks a lot and hopefully this can help others too. (not to mention I learned a lot!) :) This is one important reason why I am in love with linux. :) A little curiosity and it lets you learn everything you care about hardware/software. Yes, Linux is so good. After dual booting for a while I don't even want/need to use M$ anymore and that's why I want to kill M$ completely. (not to mention the label on the laptop!) :) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Cannot run iceweasel on remote host
On 10/4/07, Liam O'Toole [EMAIL PROTECTED] wrote: On Thu, 4 Oct 2007 12:44:24 -0400 Manu Hack [EMAIL PROTECTED] wrote: On 10/3/07, Liam O'Toole [EMAIL PROTECTED] wrote: On Wed, 03 Oct 2007 18:08:29 +0530 Raj Kiran Grandhi [EMAIL PROTECTED] wrote: Hi, I am facing a weird problem when trying to run iceweasel on a remote host through an ssh session. I have logged into the remote host using ssh -Y remote and at the prompt of the remote host, I ran iceweasel. However it appears that a local instance of iceweasel is started. There is no iceweasel/firefox process at all on the remote host. The only way I could get iceweasel to run on the remote host is by closing all instances of iceweasel already running on the localhost. Is something wrong? No, it's a feature :-) If not, how do I run separate instances of iceweasel concurrently? Invoke iceweasel on the remote host by issuing the command 'iceweasel -no-remote'. It doesn't work for me. It still gave me a box saying: Iceweasel is already running, but is not responding. To open a new window, you must first close the existing Iceweasel process, or restart your system. Any clue? Manu I'm not sure sure what you are trying to do, or how you are going about it. Let's assume that you wish to connect to an existing iceweasel instance from a remote host. First, try connecting from the same host. On that host, try the command 'iceweasel -new-window http://www.debian.org'. What happens? It pops up a box say the same thing --- Iceweasel is already running, but is not responding. To open a new window, you must first close the existing Iceweasel process, or restart your system.. Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
resize the partition with /
Hi all, I have a problem with an old desktop running etch. Before it was running XP + etch dual boot. But recently I have deleted the whole XP partition. Now the problem is I started running out of space for the etch. I want to resize the partition so that I can install more programs and stuff like that. The current partition is like hda1 - 5G (before running XP) hda2 - 1G ( etch is living here) So I'd like to resize hda2 but I can't as it said I need to unmount hda2 before resizing. People suggest using a live CD but it's not possible with my old laptop (I didn't even install etch using CD, I can only install etch via goodbyemicrosoft.com). USB boot is also not available. Any suggestion would be welcome. What I want to do is to be able to apt-get upgrade stuff as right now I have only 5Mb of space in hda2. Thanks a lot! Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: resize the partition with /
On 9/30/07, Douglas A. Tutty [EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 04:17:42PM -0400, Manu Hack wrote: I have a problem with an old desktop running etch. Before it was running XP + etch dual boot. But recently I have deleted the whole XP partition. Now the problem is I started running out of space for the etch. I want to resize the partition so that I can install more programs and stuff like that. The current partition is like hda1 - 5G (before running XP) hda2 - 1G ( etch is living here) So I'd like to resize hda2 but I can't as it said I need to unmount hda2 before resizing. People suggest using a live CD but it's not possible with my old laptop (I didn't even install etch using CD, I can only install etch via goodbyemicrosoft.com). USB boot is also not available. Have you considered reinstalling onto hda1 without removing hda2? Not really. Mainly because that old laptop is really old. No other method is available to reboot other than that 6G harddisk. Use debootstrap from your existing system. Make a grub-disk (floppy, so your laptop can boot it) so that you can set up your boot loader if something happens. Even floppy boot is not available. See the installation manual for installing from an existing unix system. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: resize the partition with /
On 9/30/07, Marc Shapiro [EMAIL PROTECTED] wrote: Douglas A. Tutty wrote: On Sun, Sep 30, 2007 at 04:17:42PM -0400, Manu Hack wrote: I have a problem with an old desktop running etch. Before it was running XP + etch dual boot. But recently I have deleted the whole XP partition. Now the problem is I started running out of space for the etch. I want to resize the partition so that I can install more programs and stuff like that. The current partition is like hda1 - 5G (before running XP) hda2 - 1G ( etch is living here) So I'd like to resize hda2 but I can't as it said I need to unmount hda2 before resizing. People suggest using a live CD but it's not possible with my old laptop (I didn't even install etch using CD, I can only install etch via goodbyemicrosoft.com). USB boot is also not available. Have you considered reinstalling onto hda1 without removing hda2? Or mount hda1 at some point on hda2 where you need the extra space. Voila! 5 GB extra space. You could also remove hda1 and recreate several partitions if you want to add space at multiple points in your filesystem. That's what I'm doing. But is it possible to increase the size for apt-get upgrade and apt-get install? Right now I can use that 5G for personal use but for the main thing like in /usr what's the best way to make use of that 5G? Any good website showing how to do add space at multiple points in the file system? Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: efficiency of windows managers
On 9/27/07, Andrew Sackville-West [EMAIL PROTECTED] wrote: On Thu, Sep 27, 2007 at 04:41:12PM -0400, Manu Hack wrote: On 9/27/07, Andy [EMAIL PROTECTED] wrote: Am Donnerstag, 27. September 2007 21:02 schrieb Manu Hack: Hi all, I have a general question which I got when trying out different windows managers/desktop environments. When I try to use windowmaker (I wanted to make my computer faster as it's getting old), it certainly is fast for initialization. But after that when around 10-15 windows are opened and distributed in different workspaces, I found moving around different workspaces and windows pretty slow (I compared with KDE which I usually use.) and thus I still decided to stick with KDE for the moment. Maybe the comparison is not fair as KDE definitely needs longer time to initialize. But my question is, is there a reason for that? Manu You might need more RAM I agree. :) But I'm still confused as to why KDE can outperform (at least up to my experience) a supposedly light weight wm (maybe windowmaker is not lightweight enough, will try fluxbox later) on the same machine. Is that because of something like memory management or something like that? its probably got more to do with memory *use* than management. By that I mean, you may end up wasting memory by using kde apps within a different wm. The kde apps will load up whole bunches of kde libs in order to function in addition to the libs used by whatever wm you're using. You haven't said what your 10-15 windows are doing, so I'm only guessing. Also, it what ways does kde perform better than windowmaker? is it in overall response of the system? screen drawing? window dragging? just switching from one app to another within the same workspace? More windows are pretty standard, like gaim, iceweasel, icedove, xchat, amule, etc. The thing happened is that whenever I need to move to a workspace with more than 3 windows already there, it takes seconds to reload and always give me a window on top which is not previous on the top. I don't know why but it never happened in KDE or Xfce. The reason I'm asking is that I want to change because before I thought I can improve the efficiency by using a more lightweight wm but it turns out it's not true in my case. So maybe as long as the memory is enough to use KDE (or GNOME), KDE can be faster than those lightweight wm because they use more memory? you should do some more comprehensive testing to see if you can figure out what's going on. keep an eye on a top instance or two and sort them by processor usage and memory usage. That will give some insight. Yeah, will do if I have the time. But at the moment I'm very happy with xfce4.4 (fast and with the real transparency stuff). :) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: efficiency of windows managers
On 9/28/07, Ron Johnson [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 09/28/07 17:21, Manu Hack wrote: [snip] Yeah, will do if I have the time. But at the moment I'm very happy with xfce4.4 (fast and with the real transparency stuff). :) What's the benefit of transparency? Not much. And I'm not saying xfce4.4 is good only because of the transparency. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
efficiency of windows managers
Hi all, I have a general question which I got when trying out different windows managers/desktop environments. When I try to use windowmaker (I wanted to make my computer faster as it's getting old), it certainly is fast for initialization. But after that when around 10-15 windows are opened and distributed in different workspaces, I found moving around different workspaces and windows pretty slow (I compared with KDE which I usually use.) and thus I still decided to stick with KDE for the moment. Maybe the comparison is not fair as KDE definitely needs longer time to initialize. But my question is, is there a reason for that? Thanks. Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: efficiency of windows managers
On 9/27/07, Andy [EMAIL PROTECTED] wrote: Am Donnerstag, 27. September 2007 21:02 schrieb Manu Hack: Hi all, I have a general question which I got when trying out different windows managers/desktop environments. When I try to use windowmaker (I wanted to make my computer faster as it's getting old), it certainly is fast for initialization. But after that when around 10-15 windows are opened and distributed in different workspaces, I found moving around different workspaces and windows pretty slow (I compared with KDE which I usually use.) and thus I still decided to stick with KDE for the moment. Maybe the comparison is not fair as KDE definitely needs longer time to initialize. But my question is, is there a reason for that? Thanks. Manu You might need more RAM regards Andy :-) I agree. :) But I'm still confused as to why KDE can outperform (at least up to my experience) a supposedly light weight wm (maybe windowmaker is not lightweight enough, will try fluxbox later) on the same machine. Is that because of something like memory management or something like that? The reason I'm asking is that I want to change because before I thought I can improve the efficiency by using a more lightweight wm but it turns out it's not true in my case. So maybe as long as the memory is enough to use KDE (or GNOME), KDE can be faster than those lightweight wm because they use more memory? Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
ekiga
Hi all, After a dist-upgrade (I'm using sid), ekiga can't be installed anymore. Is there any way to install it in sid? Thanks! Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Réinstall debian si changement de carte mère ?
Bonjour à tous, Je viens de me faire griller ma carte mère que je dis donc remplacer. Devrai-je réinstaller debian (testing) ? -- Emmanuel Bosc
Re: cannot logoff/shutdown properly
On 8/24/07, Florian Kulzer [EMAIL PROTECTED] wrote: On Thu, Aug 23, 2007 at 22:38:27 -0400, Manu Hack wrote: On 8/23/07, Florian Kulzer wrote: On Wed, Aug 22, 2007 at 01:25:47 -0400, Manu Hack wrote: On 8/21/07, Florian Kulzer wrote: On Tue, Aug 21, 2007 at 12:29:53 -0400, Manu Hack wrote: I finally have the chance to look at /var/log/Xorg.0.log in recovery mode but it didn't have anything with (EE) or (WW). And in recovery mode, I can shutdown properly with shutdown -h now. That suggests to me that the shutdown problem might be related to the video driver that you use for Xorg. Any more suggestion? Did you try the vesa driver already? (as I suggested earlier) Yes, it turns out that similar problem is still there. Which video card do you have and which driver do you normally use? I have been using i810 for a while and before it had no problem until an update months ago. Which Intel card is it? How is the driver configured? Are there any warnings or errors in xorg's log? Run the following commands and post the output: lspci | egrep -i 'vga|graphic|display|video' 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) I have the exact same hardware on my laptop and I don't have any problems with shutting down or restarting X. awk '/Section (Device|Monitor)/,/EndSection/' /etc/X11/xorg.conf Section Device Identifier Intel Corporation 82852/855GM Integrated Graphics Device Driver i810 BusID PCI:0:2:0 I use intel instead of i810. This should not matter if you have the newest version of the driver since the i810 is only a legacy symlink nowadays which points to the intel module. What is your output for: dpkg -l xserver-xorg-video-{intel,i810} | awk '/^[^D|+]/{print $1,$2,$3}' ii xserver-xorg-video-i810 2:2.1.0-2 ii xserver-xorg-video-intel 2:2.1.0-2 Also, are there any interesting entries in /var/log/syslog around the time of the crashes/freezes? I don't think so. I think the next thing to try is if X blocks the shutdown or if something else in runlevel 2 is responsible. Shut down X and/or stop the graphical login manager with invoke-rc.d gdm stop Maybe a more detailed way to do so is helpful to me for if I run the above command the screen goes black and I lose control of everything. This still looks like a crash of the graphics driver during mode switching to me. (Did you also try this with the vesa driver?) If you are at the graphical login screen, can you switch to a terminal with CTRL + ALT + F1 (or F2, ..., F6)? I tried vesa, but the screen is not very stable and I can logoff once and then when I login again, I couldn't log off like I was using i810. Unless you can find a related message in either the syslog or the xorg log I don't know how to track this down. The only other thing I can think of right now is having a look at your loaded modules; what is your output for lsmod | egrep 'i(810|830|915)|drm|agp|i2c' ? i915 21280 3 drm73908 4 i915 intel_agp 23004 1 agpgart32168 3 drm,intel_agp Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cannot logoff/shutdown properly
On 8/24/07, Florian Kulzer [EMAIL PROTECTED] wrote: On Fri, Aug 24, 2007 at 10:46:13 -0400, Manu Hack wrote: On 8/24/07, Florian Kulzer wrote: On Thu, Aug 23, 2007 at 22:38:27 -0400, Manu Hack wrote: On 8/23/07, Florian Kulzer wrote: On Wed, Aug 22, 2007 at 01:25:47 -0400, Manu Hack wrote: On 8/21/07, Florian Kulzer wrote: On Tue, Aug 21, 2007 at 12:29:53 -0400, Manu Hack wrote: I finally have the chance to look at /var/log/Xorg.0.log in recovery mode but it didn't have anything with (EE) or (WW). And in recovery mode, I can shutdown properly with shutdown -h now. That suggests to me that the shutdown problem might be related to the video driver that you use for Xorg. [...] lspci | egrep -i 'vga|graphic|display|video' 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) I have the exact same hardware on my laptop and I don't have any problems with shutting down or restarting X. awk '/Section (Device|Monitor)/,/EndSection/' /etc/X11/xorg.conf Section Device Identifier Intel Corporation 82852/855GM Integrated Graphics Device Driver i810 BusID PCI:0:2:0 I use intel instead of i810. This should not matter if you have the newest version of the driver since the i810 is only a legacy symlink nowadays which points to the intel module. What is your output for: dpkg -l xserver-xorg-video-{intel,i810} | awk '/^[^D|+]/{print $1,$2,$3}' ii xserver-xorg-video-i810 2:2.1.0-2 ii xserver-xorg-video-intel 2:2.1.0-2 I'm hoping in the next update I won't have the same problem. :) I have slightly newer versions right now since I track Sid, but I don't recall any problems in the recent past. Also, are there any interesting entries in /var/log/syslog around the time of the crashes/freezes? I don't think so. I think the next thing to try is if X blocks the shutdown or if something else in runlevel 2 is responsible. Shut down X and/or stop the graphical login manager with invoke-rc.d gdm stop Maybe a more detailed way to do so is helpful to me for if I run the above command the screen goes black and I lose control of everything. This still looks like a crash of the graphics driver during mode switching to me. (Did you also try this with the vesa driver?) If you are at the graphical login screen, can you switch to a terminal with CTRL + ALT + F1 (or F2, ..., F6)? I tried vesa, but the screen is not very stable and I can logoff once and then when I login again, I couldn't log off like I was using i810. I would still like to know whether your system hangs if you try to switch to a terminal without shutting down gdm. If I have a graphical login prompt and press CTRL + ALT + Back I can go to a text mode login prompt but immediately I will go back to the graphical login prompt. Unless you can find a related message in either the syslog or the xorg log I don't know how to track this down. The only other thing I can think of right now is having a look at your loaded modules; what is your output for lsmod | egrep 'i(810|830|915)|drm|agp|i2c' i915 21280 3 drm73908 4 i915 intel_agp 23004 1 agpgart32168 3 drm,intel_agp That looks OK to me. (I have compiled drm, intel_agp and agpgart into my kernel, but that should not make a difference.) You do not seem to have any i2c-related modules loaded. I am not sure if this is relevant, but you do have these somewhat ominous DVOI2C errors in your xorg log. Does your system have an SMBus? Post the output of lspci | egrep -i 'i2c|smb' No output for this one. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cannot logoff/shutdown properly
On 8/23/07, Florian Kulzer [EMAIL PROTECTED] wrote: On Wed, Aug 22, 2007 at 01:25:47 -0400, Manu Hack wrote: On 8/21/07, Florian Kulzer wrote: On Tue, Aug 21, 2007 at 12:29:53 -0400, Manu Hack wrote: I finally have the chance to look at /var/log/Xorg.0.log in recovery mode but it didn't have anything with (EE) or (WW). And in recovery mode, I can shutdown properly with shutdown -h now. That suggests to me that the shutdown problem might be related to the video driver that you use for Xorg. Any more suggestion? Did you try the vesa driver already? (as I suggested earlier) Yes, it turns out that similar problem is still there. Which video card do you have and which driver do you normally use? I have been using i810 for a while and before it had no problem until an update months ago. Which Intel card is it? How is the driver configured? Are there any warnings or errors in xorg's log? Run the following commands and post the output: lspci | egrep -i 'vga|graphic|display|video' 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) awk '/Section (Device|Monitor)/,/EndSection/' /etc/X11/xorg.conf Section Device Identifier Intel Corporation 82852/855GM Integrated Graphics Device Driver i810 BusID PCI:0:2:0 EndSection Section Monitor Identifier Generic Monitor Option DPMS EndSection egrep '^\((EE|WW)\)' /var/log/Xorg.0.log (WW) The directory /usr/X11R6/lib/X11/fonts/misc does not exist. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. (WW) The directory /usr/X11R6/lib/X11/fonts/cyrillic does not exist. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi/ does not exist. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi/ does not exist. (WW) The directory /usr/X11R6/lib/X11/fonts/Type1 does not exist. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi does not exist. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi does not exist. (WW) Including the default font path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType. (EE) intel(0): detecting sil164 (EE) intel(0): Unable to read from DVOI2C_E Slave 112. (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed (WW) AIGLX: 3D driver claims to not support visual 0x23 (WW) AIGLX: 3D driver claims to not support visual 0x24 (WW) AIGLX: 3D driver claims to not support visual 0x25 (WW) AIGLX: 3D driver claims to not support visual 0x26 (WW) AIGLX: 3D driver claims to not support visual 0x27 (WW) AIGLX: 3D driver claims to not support visual 0x28 (WW) AIGLX: 3D driver claims to not support visual 0x29 (WW) AIGLX: 3D driver claims to not support visual 0x2a (WW) AIGLX: 3D driver claims to not support visual 0x2b (WW) AIGLX: 3D driver claims to not support visual 0x2c (WW) AIGLX: 3D driver claims to not support visual 0x2d (WW) AIGLX: 3D driver claims to not support visual 0x2e (WW) AIGLX: 3D driver claims to not support visual 0x2f (WW) AIGLX: 3D driver claims to not support visual 0x30 (WW) AIGLX: 3D driver claims to not support visual 0x31 (WW) AIGLX: 3D driver claims to not support visual 0x32 X -version X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Linux Debian (xorg-server 2:1.3.0.0.dfsg-12) Current Operating System: Linux debian 2.6.21-2-686 #1 SMP Wed Jul 11 03:53:02 UTC 2007 i686 Build Date: 09 August 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Also, are there any interesting entries in /var/log/syslog around the time of the crashes/freezes? I don't think so. I think the next thing to try is if X blocks the shutdown or if something else in runlevel 2 is responsible. Shut down X and/or stop the graphical login manager with invoke-rc.d gdm stop Maybe a more detailed way to do so is helpful to me for if I run the above command the screen goes black and I lose control of everything. Thanks a lot!! \ Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cannot logoff/shutdown properly
I finally have the chance to look at /var/log/Xorg.0.log in recovery mode but it didn't have anything with (EE) or (WW). And in recovery mode, I can shutdown properly with shutdown -h now. Any more suggestion? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cannot logoff/shutdown properly
On 8/21/07, Florian Kulzer [EMAIL PROTECTED] wrote: [ You should leave some context in your messages, especially if you are reviving a thread which has been inactive for almost a month; otherwise people might mistake you for one of those special posters from debianhelp.org... ] will remember to do that next time! On Tue, Aug 21, 2007 at 12:29:53 -0400, Manu Hack wrote: I finally have the chance to look at /var/log/Xorg.0.log in recovery mode but it didn't have anything with (EE) or (WW). And in recovery mode, I can shutdown properly with shutdown -h now. That suggests to me that the shutdown problem might be related to the video driver that you use for Xorg. Any more suggestion? Did you try the vesa driver already? (as I suggested earlier) Yes, it turns out that similar problem is still there. Which video card do you have and which driver do you normally use? I have been using i810 for a while and before it had no problem until an update months ago. Also, are there any interesting entries in /var/log/syslog around the time of the crashes/freezes? I don't think so. Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
cannot logoff/shutdown properly
Hi all, I'm running lenny. recently after upgrade to 2.6.21, I found that I couldn't logoff/shutdown properly from KDE/GNOME/windowmaker. By properly I mean whenever I choose logoff, usually KDM/GDM can take over and give me a login prompt but now it just goes blank and nothing can be done (including alt control back or F1) but pressing the power button to turn it off. What could go wrong? Thank a lot. Let me know what further information you need to investigate the issue. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: can't get the login window to appear after leaving machine...
On 7/21/07, Andrei Popescu [EMAIL PROTECTED] wrote: On Sat, Jul 21, 2007 at 11:27:32AM +, Michael Fothergill wrote: Dear Debianists, I am running ADM64 Debian Etch 4.0 r(0) on a AMD 3200 box. Everything is OK, except that on several occasions I have noticed that if I leave the machine for a good while until the screen goes dead and then tap on the mouse several times or tap on the keyboard or both repeatedly I can't get the machine to respond at all. I am running lenny and also had the same problem sometime ago after a update of xorg and it was solved after another update of xorg a week later. I don't know what went wrong but now it is fine. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Sound doesn't work with Iceweasel open
hello, Whenever Iceweasel is open, when I play songs I don't get any sound output. If I go to SystemPreferencesSound and press test, a window pops up saying audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Internal GStreamer error: state change failed. Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer.; I am using the lenny/testing. I have removed totem-xine and have totem-gstreamer installed and Iceweasel uses mplayer-plugin for streaming videos over internet. Anyone has any idea or suggestions about how can I avoid this problem? Regards -- G V Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: URGENT: my gnome desktop is dead
On 7/16/07, Dot Deb [EMAIL PROTECTED] wrote: By the way what is a stable functional alternative to gnome, excluding kde? You may want to try xfce. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
how to shift from stable to testing
hello Now i am using Debian Etch and I am interested in going to testing. What should I do? Does adding the testing repo in sources.list and updating will work? Does all the base packages and all others get updated? Regards -- G V Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: how to shift from stable to testing
On 15/07/07, Alan Ianson [EMAIL PROTECTED] wrote: Now i am using Debian Etch and I am interested in going to testing. What should I do? Does adding the testing repo in sources.list and updating will work? Yes, change your stable/etch lines in /etc/sources.list to testing or lenny and then run apt-get update and apt-get dist-upgrade Does all the base packages and all others get updated? Yes. You should get a new kernel too, so after you reboot you'll be running testing.. :) Ok. Thanks a lot I will upgrade my machine then. Regards -- G V Manu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]