I'd like to install Lenny into existing LVM volume group built top of Software RAID-1 physical volumes like this:
pvs: PV VG Fmt Attr PSize PFree /dev/md0 LVM_VG_2 lvm2 a- 50,13G 0 /dev/md1 LVM_VG_2 lvm2 a- 14,80G 80,00M /proc/mdstat: Personalities : [raid1] md1 : active raid1 hda9[0] hdc6[1] 15518686 blocks super 1.2 [2/2] [UU] md0 : active raid1 hda7[0] hdc5[1] 52564544 blocks [2/2] [UU] Partitions are type "fd Linux raid autodetect" and autodetected fine using existing installation (mix of etch and lenny). I used "priority=medium" boot option to give more control during install. But Lenny installer or kernel doesn't autoassemble md1, only md0. I think it should bring md1 up too. Could it be about superblock version (md1 has version 1.2 superblock). Why version 0.90 is default? As workaround how I assemble array manually from installer without erasing data? (I'm not subscribed) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org