Re: PPP Problems cont.
On Tue, 10 Nov 1998, Peter Iannarelli wrote: > Hi Guys: > > This is what I do. > > I don't log in. Loging in implies V.120. V.120 sucks. > When I get the "CONNECT" is just start ppp negotiation. > This approach seem to work with several ISPs. > I'm using a Zyxel ISDN modem at 128 so don't be > confused with the init or dialing strings. > Below is my provider file > > ABORTBUSY > ABORT"NO CARRIER" > ABORTVOICE > ABORT"NO DIALTONE" > "" ATB40&K44&J3 > "" ATDI98609234+98609234 > CONNECT '' <-- these are single quotes > > When the modem generates a CONNECT string, > the box goes right into LCP negotiation and > authenticates via PAP. In my options file I have > a line which states my login name as follows: > name [EMAIL PROTECTED] > > In my pap-secrets file I have a line which provides > my outbound password for the userid in question > as follows: > > [EMAIL PROTECTED] * password > > > Hope this is of some use. > > Peter > > > > Kent West wrote: > > > On Mon, 9 Nov 1998, Chris Hoover wrote: > > > > > I still can not get my linux box to connect to my isp (bellsouth.net), > > > and am looking for ideas and help. > > > > > > Attached is a copy of my /etc/ppp/peers/provider, > > > /etc/chatscripts/provider, and /var/log/ppp.log. > > > > > > Can someone tell me what is going on here? I've used pppconfig to set > > > it all up, and it dials out fine, but it ppp dies right after > > > connecting. > > > > > > Thanks, > > > > > > Chris > > > > > > > > > > > > /etc/ppp/peers/provider > > > # This file was generated by pppconfig. You can edit the following > > > lines > > > # but please do not delete lines or the change the comments or you will > > > # confuse pppconfig. > > > noauth #pppconfig_noauth > > > connect "/usr/sbin/chat -v -f /etc/chatscripts/provider" > > > #pppconfig_connect > > > debug #pppconfig_debug > > > /dev/ttyS2 #pppconfig_dev > > > 115200 #pppconfig_speed > > > defaultroute #pppconfig_route > > > noipdefault #pppconfig_ipdefault > > > user wax_man #pppconfig_user > > > # End of pppconfig controlled lines. You can add lines below here > > > without > > > # confusing pppconfig. > > > > > > > > > > > > /var/log/ppp.log > > > Nov 9 20:58:18 tux pppd[480]: pppd 2.3.5 started by root, uid 0 > > > Nov 9 20:58:19 tux chat[481]: abort on (BUSY) > > > Nov 9 20:58:19 tux chat[481]: abort on (NO CARRIER) > > > Nov 9 20:58:19 tux chat[481]: abort on (VOICE) > > > Nov 9 20:58:19 tux chat[481]: abort on (NO DIALTONE) > > > Nov 9 20:58:19 tux chat[481]: abort on (NO ANSWER) > > > Nov 9 20:58:19 tux chat[481]: send (ATZ^M) > > > Nov 9 20:58:19 tux chat[481]: expect (OK) > > > Nov 9 20:58:38 tux chat[481]: ATZ^M^M > > > Nov 9 20:58:38 tux chat[481]: OK > > > Nov 9 20:58:38 tux chat[481]: -- got it > > > Nov 9 20:58:38 tux chat[481]: send (ATDT2528294^M) > > > Nov 9 20:58:38 tux chat[481]: expect (CONNECT) > > > Nov 9 20:58:38 tux chat[481]: ^M > > > Nov 9 20:59:18 tux chat[481]: ATDT2528294^M > > > Nov 9 20:59:23 tux chat[481]: alarm > > > Nov 9 20:59:23 tux chat[481]: Failed > > > Nov 9 20:59:23 tux pppd[480]: Connect script failed > > > Nov 9 20:59:24 tux pppd[480]: Exit. > > > > > > > > > > > > /etc/chatscripts/provider > > > ABORT BUSY > > > ABORT "NO CARRIER" > > > ABORT VOICE > > > ABORT "NO DIALTONE" > > > ABORT "NO ANSWER" > > > "" ATZ > > > OK ATDT2528294 > > > CONNECT '' > > > sername: \d\qwax_man > > > ssword: \qpassword > > > > > > "" \d\c > > > > Just a shot in the dark; maybe your ISP's prompt uses "login:" or > > something else instead of "username:". You might want to manually dial-in > > using minicom for comparison purposes. > > > > You might also want to give wvdial a try, which is an "I'll guess my way > > through the connection process" utility that I've had good success with. I'm afraid you've gone beyond my experience level. Perhaps someone else on this list can help. Any bellsouth.net users out there? -- Kent West [EMAIL PROTECTED] KC5ENO - Amateur Radio: When all else fails. Linux - Finally! A real OS for the Intel PC!
Re: PPP Problems cont.
Hi Guys: This is what I do. I don't log in. Loging in implies V.120. V.120 sucks. When I get the "CONNECT" is just start ppp negotiation. This approach seem to work with several ISPs. I'm using a Zyxel ISDN modem at 128 so don't be confused with the init or dialing strings. Below is my provider file ABORTBUSY ABORT"NO CARRIER" ABORTVOICE ABORT"NO DIALTONE" "" ATB40&K44&J3 "" ATDI98609234+98609234 CONNECT '' <-- these are single quotes When the modem generates a CONNECT string, the box goes right into LCP negotiation and authenticates via PAP. In my options file I have a line which states my login name as follows: name [EMAIL PROTECTED] In my pap-secrets file I have a line which provides my outbound password for the userid in question as follows: [EMAIL PROTECTED] * password Hope this is of some use. Peter Kent West wrote: > On Mon, 9 Nov 1998, Chris Hoover wrote: > > > I still can not get my linux box to connect to my isp (bellsouth.net), > > and am looking for ideas and help. > > > > Attached is a copy of my /etc/ppp/peers/provider, > > /etc/chatscripts/provider, and /var/log/ppp.log. > > > > Can someone tell me what is going on here? I've used pppconfig to set > > it all up, and it dials out fine, but it ppp dies right after > > connecting. > > > > Thanks, > > > > Chris > > > > > > > > /etc/ppp/peers/provider > > # This file was generated by pppconfig. You can edit the following > > lines > > # but please do not delete lines or the change the comments or you will > > # confuse pppconfig. > > noauth #pppconfig_noauth > > connect "/usr/sbin/chat -v -f /etc/chatscripts/provider" > > #pppconfig_connect > > debug #pppconfig_debug > > /dev/ttyS2 #pppconfig_dev > > 115200 #pppconfig_speed > > defaultroute #pppconfig_route > > noipdefault #pppconfig_ipdefault > > user wax_man #pppconfig_user > > # End of pppconfig controlled lines. You can add lines below here > > without > > # confusing pppconfig. > > > > > > > > /var/log/ppp.log > > Nov 9 20:58:18 tux pppd[480]: pppd 2.3.5 started by root, uid 0 > > Nov 9 20:58:19 tux chat[481]: abort on (BUSY) > > Nov 9 20:58:19 tux chat[481]: abort on (NO CARRIER) > > Nov 9 20:58:19 tux chat[481]: abort on (VOICE) > > Nov 9 20:58:19 tux chat[481]: abort on (NO DIALTONE) > > Nov 9 20:58:19 tux chat[481]: abort on (NO ANSWER) > > Nov 9 20:58:19 tux chat[481]: send (ATZ^M) > > Nov 9 20:58:19 tux chat[481]: expect (OK) > > Nov 9 20:58:38 tux chat[481]: ATZ^M^M > > Nov 9 20:58:38 tux chat[481]: OK > > Nov 9 20:58:38 tux chat[481]: -- got it > > Nov 9 20:58:38 tux chat[481]: send (ATDT2528294^M) > > Nov 9 20:58:38 tux chat[481]: expect (CONNECT) > > Nov 9 20:58:38 tux chat[481]: ^M > > Nov 9 20:59:18 tux chat[481]: ATDT2528294^M > > Nov 9 20:59:23 tux chat[481]: alarm > > Nov 9 20:59:23 tux chat[481]: Failed > > Nov 9 20:59:23 tux pppd[480]: Connect script failed > > Nov 9 20:59:24 tux pppd[480]: Exit. > > > > > > > > /etc/chatscripts/provider > > ABORT BUSY > > ABORT "NO CARRIER" > > ABORT VOICE > > ABORT "NO DIALTONE" > > ABORT "NO ANSWER" > > "" ATZ > > OK ATDT2528294 > > CONNECT '' > > sername: \d\qwax_man > > ssword: \qpassword > > > > "" \d\c > > Just a shot in the dark; maybe your ISP's prompt uses "login:" or > something else instead of "username:". You might want to manually dial-in > using minicom for comparison purposes. > > You might also want to give wvdial a try, which is an "I'll guess my way > through the connection process" utility that I've had good success with. > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null begin:vcard n:Iannarelli;Peter tel;fax:1+416-929-1056 tel;work:1+416-929-1885 x-mozilla-html:FALSE url:http://www.genxl.com org:GenX Internte Labs;Operations adr:;;20 Madison Ave.;Toronto;ON;M5R 2S1;CA version:2.1 email;internet:Peter.Iannarelli title:Engineer x-mozilla-cpt:;0 fn:Peter Iannarelli end:vcard
Re: PPP Problems cont.
On Mon, 9 Nov 1998, Chris Hoover wrote: > I still can not get my linux box to connect to my isp (bellsouth.net), > and am looking for ideas and help. > > Attached is a copy of my /etc/ppp/peers/provider, > /etc/chatscripts/provider, and /var/log/ppp.log. > > Can someone tell me what is going on here? I've used pppconfig to set > it all up, and it dials out fine, but it ppp dies right after > connecting. > > Thanks, > > Chris > > > > /etc/ppp/peers/provider > # This file was generated by pppconfig. You can edit the following > lines > # but please do not delete lines or the change the comments or you will > # confuse pppconfig. > noauth #pppconfig_noauth > connect "/usr/sbin/chat -v -f /etc/chatscripts/provider" > #pppconfig_connect > debug #pppconfig_debug > /dev/ttyS2 #pppconfig_dev > 115200 #pppconfig_speed > defaultroute #pppconfig_route > noipdefault #pppconfig_ipdefault > user wax_man #pppconfig_user > # End of pppconfig controlled lines. You can add lines below here > without > # confusing pppconfig. > > > > /var/log/ppp.log > Nov 9 20:58:18 tux pppd[480]: pppd 2.3.5 started by root, uid 0 > Nov 9 20:58:19 tux chat[481]: abort on (BUSY) > Nov 9 20:58:19 tux chat[481]: abort on (NO CARRIER) > Nov 9 20:58:19 tux chat[481]: abort on (VOICE) > Nov 9 20:58:19 tux chat[481]: abort on (NO DIALTONE) > Nov 9 20:58:19 tux chat[481]: abort on (NO ANSWER) > Nov 9 20:58:19 tux chat[481]: send (ATZ^M) > Nov 9 20:58:19 tux chat[481]: expect (OK) > Nov 9 20:58:38 tux chat[481]: ATZ^M^M > Nov 9 20:58:38 tux chat[481]: OK > Nov 9 20:58:38 tux chat[481]: -- got it > Nov 9 20:58:38 tux chat[481]: send (ATDT2528294^M) > Nov 9 20:58:38 tux chat[481]: expect (CONNECT) > Nov 9 20:58:38 tux chat[481]: ^M > Nov 9 20:59:18 tux chat[481]: ATDT2528294^M > Nov 9 20:59:23 tux chat[481]: alarm > Nov 9 20:59:23 tux chat[481]: Failed > Nov 9 20:59:23 tux pppd[480]: Connect script failed > Nov 9 20:59:24 tux pppd[480]: Exit. > > > > /etc/chatscripts/provider > ABORT BUSY > ABORT "NO CARRIER" > ABORT VOICE > ABORT "NO DIALTONE" > ABORT "NO ANSWER" > "" ATZ > OK ATDT2528294 > CONNECT '' > sername: \d\qwax_man > ssword: \qpassword > > "" \d\c Just a shot in the dark; maybe your ISP's prompt uses "login:" or something else instead of "username:". You might want to manually dial-in using minicom for comparison purposes. You might also want to give wvdial a try, which is an "I'll guess my way through the connection process" utility that I've had good success with.
PPP Problems cont.
I still can not get my linux box to connect to my isp (bellsouth.net), and am looking for ideas and help. Attached is a copy of my /etc/ppp/peers/provider, /etc/chatscripts/provider, and /var/log/ppp.log. Can someone tell me what is going on here? I've used pppconfig to set it all up, and it dials out fine, but it ppp dies right after connecting. Thanks, Chris /etc/ppp/peers/provider # This file was generated by pppconfig. You can edit the following lines # but please do not delete lines or the change the comments or you will # confuse pppconfig. noauth #pppconfig_noauth connect "/usr/sbin/chat -v -f /etc/chatscripts/provider" #pppconfig_connect debug #pppconfig_debug /dev/ttyS2 #pppconfig_dev 115200 #pppconfig_speed defaultroute #pppconfig_route noipdefault #pppconfig_ipdefault user wax_man #pppconfig_user # End of pppconfig controlled lines. You can add lines below here without # confusing pppconfig. /var/log/ppp.log Nov 9 20:58:18 tux pppd[480]: pppd 2.3.5 started by root, uid 0 Nov 9 20:58:19 tux chat[481]: abort on (BUSY) Nov 9 20:58:19 tux chat[481]: abort on (NO CARRIER) Nov 9 20:58:19 tux chat[481]: abort on (VOICE) Nov 9 20:58:19 tux chat[481]: abort on (NO DIALTONE) Nov 9 20:58:19 tux chat[481]: abort on (NO ANSWER) Nov 9 20:58:19 tux chat[481]: send (ATZ^M) Nov 9 20:58:19 tux chat[481]: expect (OK) Nov 9 20:58:38 tux chat[481]: ATZ^M^M Nov 9 20:58:38 tux chat[481]: OK Nov 9 20:58:38 tux chat[481]: -- got it Nov 9 20:58:38 tux chat[481]: send (ATDT2528294^M) Nov 9 20:58:38 tux chat[481]: expect (CONNECT) Nov 9 20:58:38 tux chat[481]: ^M Nov 9 20:59:18 tux chat[481]: ATDT2528294^M Nov 9 20:59:23 tux chat[481]: alarm Nov 9 20:59:23 tux chat[481]: Failed Nov 9 20:59:23 tux pppd[480]: Connect script failed Nov 9 20:59:24 tux pppd[480]: Exit. /etc/chatscripts/provider ABORT BUSY ABORT "NO CARRIER" ABORT VOICE ABORT "NO DIALTONE" ABORT "NO ANSWER" "" ATZ OK ATDT2528294 CONNECT '' sername: \d\qwax_man ssword: \qpassword "" \d\c