'automatic printer configuration'
Kłaniam się. Mam kłopoty z instalacją 4.0r0 (etch). Instalacja na 15 identycznych stacjach w/g identycznej procedury: start z krążka, akceptacja proponowanego serwera lustrzanego ftp.pl.debian.org, wybór identycznych elementów (środowisko graficzne, serwer www, serwer plików, baza danych SQL, system podstawowy). Na sześciu spośród piętnastu, pod koniec instalacji (tuż przed instalacją GRUBa, po sygnale sprzątanie..) pojawia się ostrzeżenie: Debian automatic printer configuration! Ten etap instalacji nie powiódł się. Możesz spróbować uruchomić go ponownie lub pominąć i wybrać coś innego. Etap który nie powiódł się: Wybierz i zainstaluj oprogramowanie. Zrobiłem dwie próby: a/ przeszedłem dalej do końca instalując GRUBa. Wszystko startuje, ale przy doinstalowywaniu 'mc' aptitude usuwa pewną ilość zainstalowanych pakietów (różną na różnych stacjach) - czego nie ma gdy instalacja jest poprawna. Wydaje mi się, że świadczy to o błędzie instalacji (w/g aptitude różne rzeczy są zbędne). b/ na jednej stacji ponowiłem instalację oprogramowania wybierając te same elementy. Zakończył bez błędu, ale zgubił ustawione hasło root'a, założonego użytkownika itp. (nie cofałem się do wcześniejszych etapów) Oczywiście mogę sobie poradzić z hasłami, kopiować partycje ze stacji na stację, ale rzecz nie w tym, aby bawić się w chowanego z instalatorem. Przetestowałem pamięci (MemTest) - nic. Kłopoty pojawiły się, gdy uruchomiłem jednoczesną (5-6 szt) instalację, oczywiście z różnych krążków, ale może to jest przypadek (wcześniej podczas dwóch pojedynczych instalacji było OK). Czy ktoś ma jakieś pomysły odnośnie powodów tych kłopotów i co z sensem zrobić? Z podziękowaniem, L. Pańkowski -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
reinstalling has messed up the printer configuration.......
Dear Debianists, I reinstalled Sarge on my machine yet again and have now got it to correctly identify the DVD's and request them when using apt-cdrom add. I am pleased with this. The solution was to load the OS with the CD set I have from the DVD drive (master) not the CD drive. The DVD drive also reads CDs. This set the default drive in the installation to be the DVD. When I used apt-cdrom add to increase the package range it accepted the switch from CDs to the DVDs. Better still it wrote the two new DVD identifier entries into the apt sources.list file. Even better than this when I tried doing apt-get escputil as a test, the OS requested the correct DVD image to look for this file, not one of the dreaded CD images as it had done in the last installation I did, and it correctly found and installed the utility. I think Ihave now escaped from the tyranny of the CDs. But there has been a price for this. I can't seem to configure the printer properly using the foomatic gui. This used to be easy. If you fire it up and do add a printer it prompts you with USB printer Epson D88. It has detected my printer and correctly identified the model. It is an Epson D88. You hit the forward key and it creates a queue name stylus_d88 and location USB Printer #1 and printer description Epson Stylus D88. If you click forward from this you get to choose the printer make and model. It doesn't have an Epson D88 in there as such but Ihave found that clicking on e.g Epson C82 or C86 seems to be good enough in previous installations. If you continue with this it gives you some information about the Stylus C82 printer and tells you it can drive it perfectly. But when you go further it can't find the correct printer driver for it as it used to be able to do automatically. I browsed in the PPD directory in /usr/share/ppd, something I NEVER had to on the many occasions when I successfully configured the printer in previous installations and could not find a driver for any C82 type Stylus printer in the Epson folder. I ended up using a Stylus Color 300 something (not sure what it is driver) but it didn't work... I can send jobs to a printer queue nominally for the D88 but nothing prints. Its as if some printer drivers are missing or somehow the foomatic beastie can't find them as it used to be able to do? Everything else is going good and I am pleased that DVD situation now works as it should do. My next project is to learn to use jigdo. But I can't move on to this if I can't figure out what sort of rat poison has got to the printer config.. Feeling smarter and dumber at the same time, Michael Fothergill _ All-in-one security and maintenance for your PC. Get a free 90-day trial! http://clk.atdmt.com/MSN/go/msnnkwlo005002msn/direct/01/?href=http://clk.atdmt.com/MSN/go/msnnkwlo005001msn/direct/01/?href=http://www.windowsonecare.com/?sc_cid=msn_hotmail -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
CUPS + printer configuration override from clients
Hi there, I Debian (testing) on our server together with Windows and Ubuntu Clients. Since some time my users cannot change from non-duplex to duplex printing. If duplex printing is switched on for a certain printer on the CUPS server the printer will always print double sided no matter if I deactivate duplex printing on the clients printer dialog or not. I have to problem on the Windows as well as on the Linux clients. It was always possible to override the duplex printing configuration on the server by the clients printing dialog. Has anyone an idea what could cause this problem? thanks Eugen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: CUPS + printer configuration override from clients
Eugen Wintersberger [EMAIL PROTECTED] writes: Since some time my users cannot change from non-duplex to duplex printing. If duplex printing is switched on for a certain printer on the CUPS server the printer will always print double sided no matter if I deactivate duplex printing on the clients printer dialog or not. I have to problem on the Windows as well as on the Linux clients. It was always possible to override the duplex printing configuration on the server by the clients printing dialog. Has anyone an idea what could cause this problem? You'll need to provide much more detail, such as: - the make and model of printer - the PPD for the printer (/etc/cups/ppd/printername) - check if the duplex option is set in the printer configuration - set LogLevel to debug in /etc/cups/cupsd.conf, reload CUPS and then print a job with duplex enabled. Then look through /var/log/cups/error_log (and show it to us; you might need to bzip2 it). I've CC'd the printing list for you. Regards, Roger -- Roger Leigh Printing on GNU/Linux? http://gutenprint.sourceforge.net/ Debian GNU/Linuxhttp://www.debian.org/ GPG Public Key: 0x25BFB848. Please sign and encrypt your mail. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: CUPS + printer configuration override from clients
Sorry I meant I have Debian (testing) . and that my users cannot change from duplex to non-duplex printing. One should not do five things at the same time. Eugen On Wed, 2006-06-14 at 16:35 +0200, Eugen Wintersberger wrote: Hi there, I Debian (testing) on our server together with Windows and Ubuntu Clients. Since some time my users cannot change from non-duplex to duplex printing. If duplex printing is switched on for a certain printer on the CUPS server the printer will always print double sided no matter if I deactivate duplex printing on the clients printer dialog or not. I have to problem on the Windows as well as on the Linux clients. It was always possible to override the duplex printing configuration on the server by the clients printing dialog. Has anyone an idea what could cause this problem? thanks Eugen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: no printer configuration in application menu
On Sun, 21 Aug 2005 11:30:53 +0100, belahcene wrote: Hi, I don't understand why there is no printer configuration ( administration not in the menu applications (I use gnome desktop) , as in other distro like knoppix or fedora and others, same problem for sound card configuration. second thing about mozilla Hi, I am suprised that the plugins window is empty, I want to use realplayer directly from firefox and other plugins ( see attached image) but no plugins is listed see the attached image. ( I am using firefox 1.0 on sarge debian) This is the standard installation of firefox on debian. One NASTY fault with debian is, if it ain't free, it's not part of the distro... For mozilla/firefox/epiphany etc you have to track down the plugins and install them yourself... including the hugh java j2re_1.4.2 (whatever) and flashplayer, etc..If you dont' have broadband, good luck.. This one issue alone is what makes debian based distro's like mepis and ubuntu so appealing to a lot of people... They come with all these plugins so it saves you a ton of time in post install system tweeking... Of course they introduce you to a whole other set of other issues but a lot of people seem to be able to live with them... thank for help best regards bela -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
gui printer configuration
Help please - I'm not sure which package(s) are giving this problem. I had previously tried unsuccessfully to print to my wife's DeskJet 3420 on her Win98SE using her samba share via my samba client. My lack of success might not be significant in the bug reporting sense. So I have acquired a DeskJet 1120c and successfully connected it locally. The driver doesn't sem to be too happy rendering transparency but that's another level of problem. I have successfully used the gui ApplicationsDesktop PreferencesSystem ToolsPrinting to make the 1120c (on the parallel port) my default printer. So I activated the samba printer sharing to make my 1120c available to the rest of the family using load printers = yes The bug I have found is that only the DeskJet 3420 is offered as a share (It isn't even mine!) and there is no DeskJet 1120c shown as one of my shares. /ect/cups/printers.conf still shows the 3420 as default. Any ideas, anybody? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
optimal printer configuration
I have a HP deskjet 940c , have some problem to conigure it perfectly, now even lpr doen't work, only lp. Have anyone a good setup to a printerenvironment in linux? Using debian sid, Xfce4, connected to the printer via usb. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: optimal printer configuration
Carl Fûrstenberg [EMAIL PROTECTED] writes: I have a HP deskjet 940c , have some problem to conigure it perfectly, now even lpr doen't work, only lp. Have anyone a good setup to a printerenvironment in linux? Using debian sid, Xfce4, connected to the printer via usb. I usually set up the printer using CUPS (it has a config page at http://localhost:631) Pretty easy and straightforward... OTOH, I never gotten printing to work with Xfc4 (works fine everywhere else, though). -- John L. Fjellstad web: http://www.fjellstad.org/ Quis custodiet ipsos custodes -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: optimal printer configuration
On Mon, Oct 25, 2004 at 05:08:31PM +0200, Carl Fûrstenberg wrote: I have a HP deskjet 940c , have some problem to conigure it perfectly, now even lpr doen't work, only lp. Have anyone a good setup to a Are you using CUPS? If so, did you install the CUPS compatible lpr in cupsys-bsd? printerenvironment in linux? Using debian sid, Xfce4, connected to the printer via usb. -- Chris Harris [EMAIL PROTECTED] --- GNU/Linux --- The best things in life are free. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Help Needed Urgently on Printer Configuration
Respected Sir/Madam, On my debain server I am not able to configure printer which is installed on a remote windows machine. I am using a debain server - Ver 3.0 for my project. It is connected to the windows machine in network. I want to take my printouts on that remote windows machine's printer. I do know that I have to install cupsys, cupsys-bsd, cupsys-client, foomatic-bin, samba, smbclient, gs-esp a2ps packages. But at the very begiging cupsys is giving a lot of dependencies error, as a result of which I cannot proceed. Please help/guide me how to configure the printer for sucessful remote printing Thanking You, Regards, Yuvraj Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com Buy The Best In BOOKS at http://www.bestsellers.indiatimes.com Bid for for Air Tickets @ Re.1 on Air Sahara Flights. Just log on to http://airsahara.indiatimes.com and Bid Now! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Help Needed Urgently on Printer Configuration
On Sun, 2003-12-28 at 04:35, yuvrajspatil wrote: Respected Sir/Madam, On my debain server I am not able to configure printer which is installed on a remote windows machine. I am using a debain server - Ver 3.0 for my project. It is connected to the windows machine in network. I want to take my printouts on that remote windows machine's printer. I do know that I have to install cupsys, cupsys-bsd, cupsys-client, foomatic-bin, samba, smbclient, gs-esp a2ps packages. But at the very begiging cupsys is giving a lot of dependencies error, as a result of which I cannot proceed. Are you attempting to use apt-get, or dpkg to install? If you are using dpkg, you should use apt-get, which will work out all the dependancies for you. If you are using apt-get, my guess is that you need to update /etc/apt/sources.list to use some of the debian repositories. Read the fine manual! Edward -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
[EMAIL PROTECTED] wrote: On Thu, 03 Apr 2003 21:46:06 -0500 Tom Allison [EMAIL PROTECTED] wrote: sudo lpadmin -p Kyocera -E -v socket://192.168.0.100 -m Kyocera-FS-1900-Postscript.ppd lpadmin: add-printer failed: server-error-service-unavailable lpadmin: add-printer failed: server-error-service-unavailable lpadmin: add-printer failed: server-error-service-unavailable Your socket: is missing a port number socket://192.168.0.100:9100 or http://192.168.0.100:631 Kevin Tried both, no luck. They each take about 5 minutes to complete which was unexpected. I've also tried to add the printer using lynx as the browser. Result: lockup. cups pegged my CPU and my ssh connection died I'm thinking I need to do something really primitive here. Like attempt sending a postscript job, or cups configuration, manually via 'telnet 192.168.0.100 9100' to see where it actually barfs. Unfortunately I have no clue what this would involve. I can do this for things like http and smtp. lpadmin -p Kyocera -E -v socket://192.168.0.100:9100 -m Kyocera-FS-1900-Postscript.ppd lpadmin: add-printer failed: server-error-service-unavailable lpadmin: add-printer failed: server-error-service-unavailable lpadmin: add-printer failed: server-error-service-unavailable (same for s/9100/631/) -- Our little systems have their day; They have their day and cease to be; They are but broken lights of thee. -- Tennyson -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
On Fri, Apr 04, 2003 at 06:09:49AM -0500, Tom Allison wrote: Tried both, no luck. Sorry if I missed some of this thread, but did you increase the logging level to look at the problem? I find that helped me at first. Also, I wrote up a small howto that has some gotchas in it, maybe you can give it a once over? http://bevilacqua.us/HowTo/MichaelBevilacqua/CUPS/Debian/HowTo.txt HTH -- Regards, Michael Bevilacqua ~ . . /V\ [EMAIL PROTECTED] // \\ /( )\ ^`~'^ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
On Fri, 4 Apr 2003 07:18:50 -0500 Michael Bevilacqua [EMAIL PROTECTED] wrote: On Fri, Apr 04, 2003 at 06:09:49AM -0500, Tom Allison wrote: Tried both, no luck. Sorry if I missed some of this thread, but did you increase the logging level to look at the problem? I find that helped me at first. Also, I wrote up a small howto that has some gotchas in it, maybe you can give it a once over? Good suggestion about changing the log level. Tom, that's in /etc/cups/cupsd.conf. Change log level of info to debug. Mike, I looked at your howto and it seems specific to printers connected by the parallel port. Tom is trying to print over the Internet. Kevin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
Derrick 'dman' Hudson wrote: On Wed, Apr 02, 2003 at 06:14:12AM -0500, Tom Allison wrote: | Derrick 'dman' Hudson wrote: | I would first install the 'cupsys' package. Then add a local queue | for the printer (use either the lpadmin command or the web interface | which you'll find at http://localhost:631/). Specify the correct | model so that data conversions work correctly. As for the device URI | you have a couple of choices : | lpd://hostname/printername | ipp://hostname:631/ipp/port1 | socket://hostname:9100/ [...] | I started to try this approach and died here: | | Setting up cupsys (1.1.15-4) ... | Starting CUPSys: cupsd. So far so good. | [EMAIL PROTECTED]:~$ sudo foomatic-configure -s cups -n FS1900 -c | socket://192.168.0.100:9100 -p Kyocera-FS-1900 -d Postscript | Password: | Cannot read printers.conf file! Umm, hmm. First of all, I have no idea what 'foomatic-configure' is or what it is supposed to do. (actually I have a guess, but the point is that I have never used it and don't know how it is supposed to be used or how it is supposed to work) What I do notice is that you didn't configure cups after installing the package. Use the 'lpadmin' command, or point a browser to http://localhost:631/ and add a printer. OK, this is where I get into trouble. I have what is supposed to be a network printer with support for JetDirect, Cups and LPD. Unfortunately, it isn't exactly a cups server. So I guess in order to get my network printer working, I need yet another server I guess the whole point was to set up a printer that didn't require another server. After all, it's got it's own hard drive and a 233MHz CPU. -- Last time I had intimate contact with another human being was rather a painful experience... I rather liked it... ;) -- Brett Manz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
On Thu, 03 Apr 2003 06:06:05 -0500 Tom Allison [EMAIL PROTECTED] wrote: | I started to try this approach and died here: | | Setting up cupsys (1.1.15-4) ... | Starting CUPSys: cupsd. I have what is supposed to be a network printer with support for JetDirect, Cups and LPD. Unfortunately, it isn't exactly a cups server. So I guess in order to get my network printer working, I need yet another server I guess the whole point was to set up a printer that didn't require another server. After all, it's got it's own hard drive and a 233MHz CPU. You do have a server, and it's running. You just haven't told it about any printers. You do that either with the web browser interface I suggested or on the command line with lpadmin. Only one machine on the printer's network needs to run a CUPS server. The other machines can send their jobs to the server to be printed. Your printer has a hard drive? Kevin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
On Thu, 03 Apr 2003 06:06:05 -0500 Tom Allison [EMAIL PROTECTED] wrote: | I started to try this approach and died here: | | Setting up cupsys (1.1.15-4) ... | Starting CUPSys: cupsd. I have what is supposed to be a network printer with support for JetDirect, Cups and LPD. Unfortunately, it isn't exactly a cups server. So I guess in order to get my network printer working, I need yet another server I guess the whole point was to set up a printer that didn't require another server. After all, it's got it's own hard drive and a 233MHz CPU. You do have a server, and it's running. You just haven't told it about any printers. You do that either with the web browser interface I suggested or on the command line with lpadmin. Only one machine on the printer's network needs to run a CUPS server. The other machines can send their jobs to the server to be printed. Your printer has a hard drive? I guess I'm missing something then Under Windblows, all they do is point and print the stupid jobs. Under Linux, I can't seem to be able to do the same. Pointing to a 'raw' print mode doesn't seem to cut it. Pointing to a port in (515, 610, 9100) also doesn't seem to cut it. I think that the best I've achieved so far is with PDQ under 'raw' mode using the bsd-lpp interface. With this I think I get stair-casing. But I didn't expect this under a Postscript Printer using Postscript Drivers. The dump job takes .ps files and filters them again through postscript (a2ps). I'm vague as heck on all of this because my printer is actually located some 1,500 miles away and I'm trying to do all of this through ssh. when I print something, I wait for an email from the (patient) end user to tell me if he found anything and what it looked like. What kills me is right now I take a PostScript file with a first line like %! Postscript 2 (or whatever it's supposed to look like) and do 'pdq foo.ps' and the output from that comes in with that exact line three lines down and the first line being %!. Non-postscript files don't end up like this. But I'm unclear if they print at all. I do not believe that they do. so, I was thinking of trying CUPS but that initially didn't get me any further along. It was also a little unnerving that I have to run a cups server to talk to a network printer that (in theory) supports cups to begin with. The problem here is that this really intelligent printer doesn't seem capable of acting as it's own server under both Windows and Linux. Oh well, that's another problem. I'm still trying to print foo.ps! To answer your question, I really don't know for sure if it has a hard drive, but it does seem to support telnet, ftp, http, cups, lpd, and jetdirect. Which is more than some computers can do. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
On Thu, Apr 03, 2003 at 09:17:23AM -0500, [EMAIL PROTECTED] wrote: | On Thu, 03 Apr 2003 06:06:05 -0500 | Tom Allison [EMAIL PROTECTED] wrote: | | | I started to try this approach and died here: | | | | Setting up cupsys (1.1.15-4) ... | | Starting CUPSys: cupsd. | | I have what is supposed to be a network printer with support for | JetDirect, Cups and LPD. Unfortunately, it isn't exactly a cups | server. So I guess in order to get my network printer working, I need | yet another server You only need another server *IF* the clients send data which the printer can't understand by itself. | I guess the whole point was to set up a printer that didn't require | another server. After all, it's got it's own hard drive and a 233MHz | CPU. My understanding is that the hard drive exists for large queues, and the CPU is for running the PostScript/PCL interpreter. (this IS an HP LaserJet, right? Or is it that Kyocera you mentioned another time but with an expensive HP JetDirect card attached to it?) | I guess I'm missing something then Yeah, just the issue of data format and conversion. | Under Windblows, all they do is point and print the stupid jobs. True. However each Winblows machine IS a server. (the beauty and stupidity of fat clients) Each (windows) client must have the driver installed so that Windows can translate from API calls into the data stream the printer understands. Once the data stream is something the printer understands it's a walk in the park. | Under Linux, I can't seem to be able to do the same. You can, if you mimic the fat-client-no-server philosophy of Windows *OR* if you use a thin-client-fat-server architecture. | Pointing to a 'raw' print mode doesn't seem to cut it. That means the client sent some datastream which the printer doesn't understand. | Pointing to a port in (515, 610, 9100) also doesn't seem to cut it. That means something was set up really wrong. Specifying a TCP port is necessary, but not sufficient, configuration. It's only one layer in the architecture. | I think that the best I've achieved so far is with PDQ under 'raw' mode | using the bsd-lpp interface. With this I think I get stair-casing. Not bad for a start, with ASCII-only input. The stair-casing is caused by Line Feed and Carriage Return semantics. Have you ever used or seen a mechanical typewriter? Do you know how they have a lever which feeds the line up by one, and also the carriage must be returned to the beginning of the line? Well, the UNIX philosophy is one of interfaces and adapters. Text files are encoded with only \n (LineFeed) as the end-of-line indicator. The printer, and a number of terminals, separate the LF and CR functionality. So, when you stuff a UNIX file _directly_ to the device, the carriage is never returned although lines are fed. Hence the stair-casing. The solution is to filter the abstract data stored in the file and convert to what the device needs. For this the filter is a matter of replacing \n with \r\n. Simple, but needs to be configured per-device because each device can be different in this respect. | But I didn't expect this under a Postscript Printer using Postscript | Drivers. I don't think postscript came into play in the above, but I've never used PDQ so I can't say for certain. | I'm vague as heck on all of this because my printer is actually located | some 1,500 miles away and I'm trying to do all of this through ssh. when | I print something, I wait for an email from the (patient) end user to tell | me if he found anything and what it looked like. That makes it a bit difficult to fully determine what the printer understands and the quirks of it. (apart from RTMing, and assuming the documentation matches the implementation) | What kills me is right now I take a PostScript file with a first line like | %! Postscript 2 (or whatever it's supposed to look like) and do 'pdq | foo.ps' and the output from that comes in with that exact line three lines | down and the first line being %!. PS files must start with %!. % is the comment marker. So any lines beginning with % are irrelevant, *IF* the parser on the other end is robust. However, some structure has been introduced into comments which simple parsers can use (*IF* the document is well-formed) to located page separations and the like. | Non-postscript files don't end up like this. But I'm unclear if they | print at all. I do not believe that they do. That means PDQ didn't do an adequate job of data conversion. | so, I was thinking of trying CUPS but that initially didn't get me any | further along. It was also a little unnerving that I have to run a cups | server to talk to a network printer that (in theory) supports cups to | begin with. Try some experiments with the cups client software. For example, try this : lp -d port1@printer.fqdn /etc/modules lp -d port1@printer.fqdn /usr/share/cups/data/testprint.ps The first should print the
Re: remote printer configuration - cups
It bears noting in all this that when in CUPS you use lp commands they come from the cupsys-bsd package, which provides same-named replacements for traditional printing commands. They are not the same lp commands you read about in Linux books and other places. Kevin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
On Thu, Apr 03, 2003 at 05:43:40PM -0500, [EMAIL PROTECTED] wrote: | It bears noting in all this that when in CUPS you use lp commands | they come from the cupsys-bsd package, which provides same-named | replacements for traditional printing commands. Close. The lp, lpstat, cancel, etc. commands come from the cupsys-client package and replace the SysV interface. The lpr, lpq, lprm, etc. commands are replacements of the BSD interface, provided by the cupsys-bsd package. | They are not the same lp commands you read about in Linux books | and other places. In terms of implementation, that is correct. In terms of (most of the) interface that isn't correct. (I hope I'm not confusing anyone here ...) -D -- Who can say, I have kept my heart pure; I am clean and without sin? Proverbs 20:9 http://dman.ddts.net/~dman/ pgp0.pgp Description: PGP signature
Re: remote printer configuration - cups
[EMAIL PROTECTED] wrote: On Thu, 03 Apr 2003 06:06:05 -0500 Tom Allison [EMAIL PROTECTED] wrote: | I started to try this approach and died here: | | Setting up cupsys (1.1.15-4) ... | Starting CUPSys: cupsd. I have what is supposed to be a network printer with support for JetDirect, Cups and LPD. Unfortunately, it isn't exactly a cups server. So I guess in order to get my network printer working, I need yet another server I guess the whole point was to set up a printer that didn't require another server. After all, it's got it's own hard drive and a 233MHz CPU. You do have a server, and it's running. You just haven't told it about any printers. You do that either with the web browser interface I suggested or on the command line with lpadmin. Not going all that well sudo lpadmin -p Kyocera -E -v socket://192.168.0.100 -m Kyocera-FS-1900-Postscript.ppd lpadmin: add-printer failed: server-error-service-unavailable lpadmin: add-printer failed: server-error-service-unavailable lpadmin: add-printer failed: server-error-service-unavailable I'm kind of at a loss because I compared this to another cupsd.conf file I have and they are very similar to each other. -- Old age is always fifteen years old than I am. -- B. Baruch -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
On Thu, 03 Apr 2003 21:46:06 -0500 Tom Allison [EMAIL PROTECTED] wrote: sudo lpadmin -p Kyocera -E -v socket://192.168.0.100 -m Kyocera-FS-1900-Postscript.ppd lpadmin: add-printer failed: server-error-service-unavailable lpadmin: add-printer failed: server-error-service-unavailable lpadmin: add-printer failed: server-error-service-unavailable Your socket: is missing a port number socket://192.168.0.100:9100 or http://192.168.0.100:631 Kevin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
Derrick 'dman' Hudson wrote: On Sun, Mar 30, 2003 at 07:02:49AM -0500, Tom Allison wrote: | I have a printer which runs on a network connection. | | I scanned for ports and found ports associated with lpd (515), cups (631), | and jetdirect (9100?) and was trying to configure a cups client. Sounds like an HP JetDirect card connects the printer to the network. | I installed the following packages: | a2ps | cupsys-bsd | cupsys-client | foomatic-bin | foomatic-db I would first install the 'cupsys' package. Then add a local queue for the printer (use either the lpadmin command or the web interface which you'll find at http://localhost:631/). Specify the correct model so that data conversions work correctly. As for the device URI you have a couple of choices : lpd://hostname/printername ipp://hostname:631/ipp/port1 socket://hostname:9100/ Naturally, hostname can be either a name or IP address. Names are generally better. The URIs can vary somewhat depending on the software and configuration of the remote end. For example, with a cups server the ipp uri is ipp://hostname/printers/printername. HP JetDirect cards use port1 for the first printer and port2 for the second (some cards have connections for 2 printers). The general concept is the same, though. You could probably get away without setting up a server if you use the IPP URI, but you would have less control and flexibility. One of CUPS' strong points is the ability to accept many types of input (text, PS, PDF, JPG, PNG, etc.) and automatically convert it to something the printer understands. That is all done server-side, so without a server you lose that functionality. | So I tried configuring it a direct configuration: | foomatic-configure -s cups -n remoteraw -c socket://192.168.0.100:631/ This is really wrong -- the socket protocol (aka JetDirect) normally uses port 9100. Port 631 is (normally) for the IPP protocol. Don't try mixing and matching them unless you know for certain that the server-side setup is unusual. HTH, -D I started to try this approach and died here: Setting up cupsys (1.1.15-4) ... Starting CUPSys: cupsd. [EMAIL PROTECTED]:~$ sudo foomatic-configure -s cups -n FS1900 -c socket://192.168.0.100:9100 -p Kyocera-FS-1900 -d Postscript Password: Cannot read printers.conf file! === I've installed the following (dpkg -l cup*) dpkg -l cup* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name VersionDescription +++-==-==- pn cupnone (no description available) un cups none (no description available) pn cupsomatic-ppd none (no description available) ii cupsys 1.1.15-4 Common UNIX Printing System(tm) - server ii cupsys-bsd 1.1.15-4 Common UNIX Printing System(tm) - BSD comman ii cupsys-client 1.1.15-4 Common UNIX Printing System(tm) - client pro pn cupsys-driver- none (no description available) pn cupsys-pstoras none (no description available) in cupsys-pt none (no description available) Where does the printer.conf file come into play? -- Cops never say good-bye. They're always hoping to see you again in the line-up. -- Raymond Chandler -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
On Wed, Apr 02, 2003 at 06:14:12AM -0500, Tom Allison wrote: | Derrick 'dman' Hudson wrote: | I would first install the 'cupsys' package. Then add a local queue | for the printer (use either the lpadmin command or the web interface | which you'll find at http://localhost:631/). Specify the correct | model so that data conversions work correctly. As for the device URI | you have a couple of choices : | lpd://hostname/printername | ipp://hostname:631/ipp/port1 | socket://hostname:9100/ [...] | I started to try this approach and died here: | | Setting up cupsys (1.1.15-4) ... | Starting CUPSys: cupsd. So far so good. | [EMAIL PROTECTED]:~$ sudo foomatic-configure -s cups -n FS1900 -c | socket://192.168.0.100:9100 -p Kyocera-FS-1900 -d Postscript | Password: | Cannot read printers.conf file! Umm, hmm. First of all, I have no idea what 'foomatic-configure' is or what it is supposed to do. (actually I have a guess, but the point is that I have never used it and don't know how it is supposed to be used or how it is supposed to work) What I do notice is that you didn't configure cups after installing the package. Use the 'lpadmin' command, or point a browser to http://localhost:631/ and add a printer. [...] | pn cupsomatic-ppd none (no description available) | pn cupsys-driver- none (no description available) | pn cupsys-pstoras none (no description available) | in cupsys-pt none (no description available) | You might want to install some or all of these packages because they contain additional drivers to choose from when creating a printer queue. | Where does the printer.conf file come into play? It is managed by the cupsd daemon and modified via the 'lpadmin' command or the web interface. I suppose (but don't have a system to experiment with) that the file doesn't exist until you create a printer queue. On my system it is an apache-config-style file which contains the configuration for all the printer (not class) queues. Taking a look at my system, I have the following (related) printer drivers available : Kyocera F-800T, Foomatic + ljetplus (en) Kyocera F-1010, Foomatic + laserjet (en) Kyocera F-3300, Foomatic + ljetplus (en) Kyocera FS-600 (KPDL-2), Foomatic + Postscript (en) Kyocera FS-600, Foomatic + ljet4 (en) Kyocera FS-680, Foomatic + ljet4 (en) Kyocera FS-800, Foomatic + Postscript (en) Kyocera FS-1000, Foomatic + ljet4 (en) Kyocera FS-1200, Foomatic + Postscript (en) Kyocera FS-1700+, Foomatic + Postscript (en) Kyocera FS-1750, Foomatic + Postscript (en) Kyocera FS-3500, Foomatic + laserjet (en) Kyocera FS-3500, Foomatic + ljet3 (en) Kyocera FS-3750, Foomatic + lj5gray (en) Kyocera FS-3750, Foomatic + ljet4 (en) Kyocera FS-3750, Foomatic + pxlmono (en) Kyocera FS-5900C, Foomatic + Postscript (en) Kyocera P-2000, Foomatic + ljetplus (en) (that's a partial screen shot of elinks browsing the cups web interface) HTH, -D -- The wise in heart are called discerning, and pleasant words promote instruction. Proverbs 16:21 http://dman.ddts.net/~dman/ pgp0.pgp Description: PGP signature
Re: remote printer configuration - cups
On Sun, Mar 30, 2003 at 07:02:49AM -0500, Tom Allison wrote: | I have a printer which runs on a network connection. | | I scanned for ports and found ports associated with lpd (515), cups (631), | and jetdirect (9100?) and was trying to configure a cups client. Sounds like an HP JetDirect card connects the printer to the network. | I installed the following packages: | a2ps | cupsys-bsd | cupsys-client | foomatic-bin | foomatic-db I would first install the 'cupsys' package. Then add a local queue for the printer (use either the lpadmin command or the web interface which you'll find at http://localhost:631/). Specify the correct model so that data conversions work correctly. As for the device URI you have a couple of choices : lpd://hostname/printername ipp://hostname:631/ipp/port1 socket://hostname:9100/ Naturally, hostname can be either a name or IP address. Names are generally better. The URIs can vary somewhat depending on the software and configuration of the remote end. For example, with a cups server the ipp uri is ipp://hostname/printers/printername. HP JetDirect cards use port1 for the first printer and port2 for the second (some cards have connections for 2 printers). The general concept is the same, though. You could probably get away without setting up a server if you use the IPP URI, but you would have less control and flexibility. One of CUPS' strong points is the ability to accept many types of input (text, PS, PDF, JPG, PNG, etc.) and automatically convert it to something the printer understands. That is all done server-side, so without a server you lose that functionality. | So I tried configuring it a direct configuration: | foomatic-configure -s cups -n remoteraw -c socket://192.168.0.100:631/ This is really wrong -- the socket protocol (aka JetDirect) normally uses port 9100. Port 631 is (normally) for the IPP protocol. Don't try mixing and matching them unless you know for certain that the server-side setup is unusual. HTH, -D -- After you install Microsoft Windows XP, you have the option to create user accounts. If you create user accounts, by default, they will have an account type of administrator with no password. -- bugtraq http://dman.ddts.net/~dman/ pgp0.pgp Description: PGP signature
remote printer configuration - cups
I have a printer which runs on a network connection. I scanned for ports and found ports associated with lpd (515), cups (631), and jetdirect (9100?) and was trying to configure a cups client. I installed the following packages: a2ps cupsys-bsd cupsys-client foomatic-bin foomatic-db I tried to set the /etc/cups/client.conf file to include the IP address for the printer. That didn't work. I tried to use foomatic-configure and it complained that there was no printer.conf file. This seems to show up under the cupsys package, but installing that does nothing for me. So I tried configuring it a direct configuration: foomatic-configure -s cups -n remoteraw -c socket://192.168.0.100:631/ foomatic-configure -s cups -D -n remoteraw And nothing, so I removed it and tried: foomatic-configure -s direct -n remoteraw -c socket://192.168.0.100:631/ foomatic-configure -s direct -D -n remoteraw And nothing... -- On the Internet, nobody knows you're a dog. -- Cartoon caption -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: remote printer configuration - cups
On Sun, 30 Mar 2003 07:02:49 -0500 Tom Allison [EMAIL PROTECTED] wrote: So I tried configuring it a direct configuration: foomatic-configure -s cups -n remoteraw -c socket://192.168.0.100:631/ foomatic-configure -s cups -D -n remoteraw And nothing, so I removed it and tried: foomatic-configure -s direct -n remoteraw -c socket://192.168.0.100:631/ foomatic-configure -s direct -D -n remoteraw Port 631 is used for CUPS admin. Fire up your web browser and point it at http://localhost:631; and you should see the CUPS admin screen. You want to manage printers, then add a printer. Port 9100 is the default port for JetDirect interfaces. Using the CUPS wizard, after you give the new printer a name, location and description you'll come to the device screen. Choose AppSocket/HP JetDirect. Next you're asked for Device URI. Mine is socket://lj4:9100, where lj4 is the *name* of the printer I input a few screens ago. (It corresponds to print queue in the lpr scheme.) Then pick your driver and you should be off to the races. Kevin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
kyocera printer configuration
I'm trying to get a kyocera FS-1900 printer set up under Linux. It's a jetdirect type of network printer. I'm find a ton of packages for different PPD files, which I assume I need one of them right now. I'm not really sure what I'm doing. Does anyone have any suggestions on how to procede? I have two machines to set up. One is semi-installed with PDQ and the other is unconfigured. Printing will be rare, so smaller applications would be preferred if there is such a selection -- The degree of civilization in a society can be judged by entering its prisons. -- F. Dostoyevski -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Printer configuration
I just now noticed (and remembered) that during the installation of Woody that I did earlier today, no printers were configured.At the time of installation I was not connected to the local network. I checked on the Gnome control panel but there is no place where I can configure the printcap. The Debian Users Guide also cation about manual editing of the printcap because of the use of magicfilter Can anyone please. Thanks Johan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Printer configuration
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wed, Mar 19, 2003 at 05:08:30PM +0200, Johan van der Walt wrote: I checked on the Gnome control panel but there is no place where I can configure the printcap. The Debian Users Guide also cation about manual editing of the printcap because of the use of magicfilter Your best option is to go hit http://www.tldp.org/ and look up the Printing Howto. Or, apt-get install magicfilter, I *think* debconf asks you questions about your printer, but it's been a *long* time since I used it. - -- .''`. Baloo Ursidae [EMAIL PROTECTED] : :' :proud Debian admin and user `. `'` `- Debian - when you have better things to do than fix a system -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+eI6UJ5vLSqVpK2kRAnyEAJ9dODnY4VQrtEzVoIi9F0XiEOxREQCgq/fZ yKpq6WGq/puGx0CUTZGerPo= =A3/o -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Printer configuration
On Wed, Mar 19, 2003 at 05:08:30PM +0200, Johan van der Walt wrote: I checked on the Gnome control panel but there is no place where I can configure the printcap. The Debian Users Guide also cation about manual editing of the printcap because of the use of magicfilter I don't use GNOME, I just type magicfilterconfig at a prompt. -- Carl Fink [EMAIL PROTECTED] Manager, Dueling Modems Computer Forum http://dm.net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: lprng 3.8.4-2 - network printer configuration?
On Mon, Jan 28, 2002 at 10:54:04PM +0100, Florian Petri wrote: I have a problem configuring my network printer. excerpt /etc/printcap: brother|Remote printer entry :[EMAIL PROTECTED] :sd=/var/spool/lpd/remote Here is my working configuration for a network laser printer: lp|tardis|Xerox DocuPrint N17 with duplex:\ :lp=:sd=/var/spool/lpd/tardis:rm=192.168.0.13:rp=tardis:lpr_bounce:\ :sh:pw#80:pl#66:px#1440:mx#0:\ #:if=/etc/magicfilter/psonly600-filter:\ :af=/var/log/lp-acct:lf=/var/log/lp-errs: This was generated by magicfilterconfig. If you do not use magicfilter I suggest you install it. It is a reliable non-nonsence print filter that handles common formats like DVI and PDF. -- Henry House The attached file is a digital signature. See http://romana.hajhouse.org/pgp for information. My OpenPGP key: http://romana.hajhouse.org/hajhouse.asc. pgpgXY4dbA8AI.pgp Description: PGP signature
lprng 3.8.4-2 - network printer configuration?
Hi! I have a problem configuring my network printer. excerpt /etc/printcap: brother|Remote printer entry :[EMAIL PROTECTED] :sd=/var/spool/lpd/remote Now I run lpq: Printer: brother is [EMAIL PROTECTED] Printer: [EMAIL PROTECTED] - ERROR: spool queue for 'text_p1' does not exist on server nuntius.flop.net non-existent printer or you need to run 'checkpc -f' checkpc -f has no output. Is this a bug or what did I wrong? I wanted to use the lpq port of my network printer. This above should be a simple configuration (adapted from lprng homepage). 192.168.xx.99 is not the localhost. Thanks cu Floh
Re: Printer configuration
on Sat, Nov 24, 2001 at 04:38:19PM +0100, Andrea Merello ([EMAIL PROTECTED]) wrote: Hello Debian World! Can you help me to install an configure the Epson Stylus Color 580 USB Epson LQ 100 printers with my Debian 2.2? What, if anything, have you tried? Many people recommend CUPS these days. I still tend to use lprng with the RH printtool configuration utility. Should walk you straight through the process, particularly for a parallel port printer. You'll need parport support, and information that your printer isn't a WinPrinter. Google is your friend. Peace. -- Karsten M. Self kmself@ix.netcom.com http://kmself.home.netcom.com/ What part of Gestalt don't you understand? Home of the brave http://gestalt-system.sourceforge.net/ Land of the free Free Dmitry! Boycott Adobe! Repeal the DMCA! http://www.freesklyarov.org Geek for Hire http://kmself.home.netcom.com/resume.html pgpkhkngNuCiB.pgp Description: PGP signature
Printer configuration
Hello Debian World! Can you help me to install an configure the Epson Stylus Color 580 USB Epson LQ 100 printers with my Debian 2.2? Thanks!
printer configuration
Dear lists, I think I have a pretty good handle on my printer, buu. the standard printcap file's text will only print one laddered line on a page. So I looked at FreeBSD's instructions, but they are not quite the same. It is an older HPLaserJetSeries 2. The original printcap was: lp|Generic dot-matrix printer entry:\ : lp=/dev/lp0;\ :sd=/var/spool/lpd/lp:\ :af=/var/log/lp-acct:\ :lf=/var/log/lp-errs:\ :pl#66:\ :pw#80:\ :pc#150:\ :mx#0:\ :sh: I changed this to: fugger|lp|HPLaserJetSeries2 sh:sd=/var/spool/lpd/fugger:\ :lp=/dev/lp0 :if=/usr/local/libexec/if-simple;\ where if-simple transfers text from stdin to stdout Would someone send me some tweaks so I can print ?? I've only had this potato less than a week and UNIX is my preferred C programming tool, but I'm stuck and I guess I'll have to use Visual C++ for a while because I can print long programs to debug. Thank you gentlemen and ladies !! Johnny
Re: printer configuration
On Fri, Feb 23, 2001 at 04:12:42PM -0800, JOHN MUELLER wrote: Would someone send me some tweaks so I can print ?? I've only had this potato less than a week and UNIX is my preferred C programming tool, but I'm stuck and I guess I'll have to use Visual C++ for a while because I can print long programs to debug. Thank you gentlemen and ladies !! Johnny Probably the best bet is to install the magicfilter package which will step you through the printer(s) on your system and set up other neat filters that allow the direct printing of different file formats with lpr. - Nate -- Wireless | Amateur Radio Station N0NB | None can love freedom Internet | [EMAIL PROTECTED] | heartily, but good Location | Wichita, Kansas USA EM17hs | men; the rest love not Wichita area exams; ham radio; Linux info @ | freedom, but license. http://www.qsl.net/n0nb/ | -- John Milton
RE: Printer configuration on debian
On 09-Oct-2000 Dwight Johnson wrote: What is the preferred way to configure a PostScript printer on debian 2.2? Thanks to everyone who helped me with suggestions. I used magicfilter with lpd and also took care to have the kernel modules parport, parport_pc and lp installed. Dwight -- Dwight Johnson [EMAIL PROTECTED]
Re: ODP: Printer configuration on debian
How do I configure CUPS? I'm trying to set up my printer with magicfilter. I think there is a permission problem, but I'm not sure. Here's where I'm at.. I can print using staroffice. I can't print using lp, I get the following output: lp: error - no default destination available. If I try to print using 'y' in mutt or slrn--doesn't work. Slrn returns 'error 1'. Here's how my /etc/printcap looks: # This file was generated by /usr/sbin/magicfilterconfig. # lp|lp|Epson StylusColor 600:\ :lp=/dev/lp0:sd=/var/spool/lpd/lp:\ :sh:pw#80:pl#66:px#1440:mx#0:\ :if=/etc/magicfilter/[EMAIL PROTECTED]:\ :af=/var/log/lp-acct:lf=/var/log/lp-errs I also downloadd xpp and it installed the CUPS client and server. Yet when I run xpp it tells me it's unable to connect to CUPS server, check options. duh.. I'm confused please help thanks [EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote: Or use cups with a nice configuration tool. Mariusz On 09-Oct-2000 Dwight Johnson wrote: What is the preferred way to configure a PostScript printer on debian 2.2? MagicFilter did fine for mine. - - Nick - [EMAIL PROTECTED] Your mode of life will be changed for the better because of new developments. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- The major advances in civilization are processes that all but wreck the societies in which they occur. --Albert North Whitehead
Re: ODP: Printer configuration on debian
Dale Morris [EMAIL PROTECTED] writes: How do I configure CUPS? I'm trying to set up my printer with magicfilter. I think there is a permission problem, but I'm not sure. Here's where I'm at.. I can print using staroffice. I can't print using lp, I get the following output: lp: error - no default destination available. If I try to print using 'y' in mutt or slrn--doesn't work. Slrn returns 'error 1'. Use lpr, not lp! Here's how my /etc/printcap looks: # This file was generated by /usr/sbin/magicfilterconfig. # lp|lp|Epson StylusColor 600:\ :lp=/dev/lp0:sd=/var/spool/lpd/lp:\ :sh:pw#80:pl#66:px#1440:mx#0:\ :if=/etc/magicfilter/[EMAIL PROTECTED]:\ :af=/var/log/lp-acct:lf=/var/log/lp-errs I also downloadd xpp and it installed the CUPS client and server. Yet when I run xpp it tells me it's unable to connect to CUPS server, check options. duh.. I'm confused please help thanks [EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote: Or use cups with a nice configuration tool. Mariusz On 09-Oct-2000 Dwight Johnson wrote: What is the preferred way to configure a PostScript printer on debian 2.2? MagicFilter did fine for mine. - - Nick - [EMAIL PROTECTED] Your mode of life will be changed for the better because of new developments. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- The major advances in civilization are processes that all but wreck the societies in which they occur. --Albert North Whitehead -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Andre Berger [EMAIL PROTECTED] from Bonn, Germany
RE: ODP: Printer configuration on debian
did you install an additional package cups-bsd ? -Original Message- From: Andre Berger [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 10, 2000 10:01 AM To: Dale Morris Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; debian-user@lists.debian.org Subject: Re: ODP: Printer configuration on debian Dale Morris [EMAIL PROTECTED] writes: How do I configure CUPS? I'm trying to set up my printer with magicfilter. I think there is a permission problem, but I'm not sure. Here's where I'm at.. I can print using staroffice. I can't print using lp, I get the following output: lp: error - no default destination available. If I try to print using 'y' in mutt or slrn--doesn't work. Slrn returns 'error 1'. Use lpr, not lp! Here's how my /etc/printcap looks: # This file was generated by /usr/sbin/magicfilterconfig. # lp|lp|Epson StylusColor 600:\ :lp=/dev/lp0:sd=/var/spool/lpd/lp:\ :sh:pw#80:pl#66:px#1440:mx#0:\ :if=/etc/magicfilter/[EMAIL PROTECTED]:\ :af=/var/log/lp-acct:lf=/var/log/lp-errs I also downloadd xpp and it installed the CUPS client and server. Yet when I run xpp it tells me it's unable to connect to CUPS server, check options. duh.. I'm confused please help thanks [EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote: Or use cups with a nice configuration tool. Mariusz On 09-Oct-2000 Dwight Johnson wrote: What is the preferred way to configure a PostScript printer on debian 2.2? MagicFilter did fine for mine. - - Nick - [EMAIL PROTECTED] Your mode of life will be changed for the better because of new developments. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- The major advances in civilization are processes that all but wreck the societies in which they occur. --Albert North Whitehead -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Andre Berger [EMAIL PROTECTED] from Bonn, Germany -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: ODP: Printer configuration on debian
no, installation of CUPS came with xpp and apt-get retrieved the extra packages related to CUPS/xpp. [EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote: did you install an additional package cups-bsd ? How do I configure CUPS? I'm trying to set up my printer with magicfilter. I think there is a permission problem, but I'm not sure.
Re: ODP: Printer configuration on debian
When I use lpr... nothing happens.. printer is silent. That's why I'm so confused. Andre Berger ([EMAIL PROTECTED]) wrote: Dale Morris [EMAIL PROTECTED] writes: How do I configure CUPS? I'm trying to set up my printer with magicfilter. I think there is a permission problem, but I'm not sure. Here's where I'm at.. I can print using staroffice. I can't print using lp, I get the following output: lp: error - no default destination available. If I try to print using 'y' in mutt or slrn--doesn't work. Slrn returns 'error 1'. Use lpr, not lp!
RE: ODP: Printer configuration on debian
cups-bsd has a wrapper for BSD printing functions like lp. I hade to installed it to use normal BSD functions. If I remember cups suggest cups-bsd with dselect method installation. Mariusz -Original Message- From: Dale Morris [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 10, 2000 1:59 PM To: [EMAIL PROTECTED] Cc: debian-user@lists.debian.org Subject: Re: ODP: Printer configuration on debian no, installation of CUPS came with xpp and apt-get retrieved the extra packages related to CUPS/xpp. [EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote: did you install an additional package cups-bsd ? How do I configure CUPS? I'm trying to set up my printer with magicfilter. I think there is a permission problem, but I'm not sure.
RE: ODP: Printer configuration on debian
On 10-Oct-2000 [EMAIL PROTECTED] wrote: did you install an additional package cups-bsd ? -Original Message- From: Andre Berger [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 10, 2000 10:01 AM To: Dale Morris Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; debian-user@lists.debian.org Subject: Re: ODP: Printer configuration on debian Dale Morris [EMAIL PROTECTED] writes: How do I configure CUPS? I'm trying to set up my printer with magicfilter. I think there is a permission problem, but I'm not sure. Here's where I'm at.. I can print using staroffice. I can't print using lp, I get the following output: lp: error - no default destination available. If I try to print using 'y' in mutt or slrn--doesn't work. Slrn returns 'error 1'. Use lpr, not lp! Here's how my /etc/printcap looks: # This file was generated by /usr/sbin/magicfilterconfig. # lp|lp|Epson StylusColor 600:\ :lp=/dev/lp0:sd=/var/spool/lpd/lp:\ :sh:pw#80:pl#66:px#1440:mx#0:\ :if=/etc/magicfilter/[EMAIL PROTECTED]:\ :af=/var/log/lp-acct:lf=/var/log/lp-errs I also downloadd xpp and it installed the CUPS client and server. Yet when I run xpp it tells me it's unable to connect to CUPS server, check options. duh.. I'm confused please help thanks [EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote: Or use cups with a nice configuration tool. Mariusz On 09-Oct-2000 Dwight Johnson wrote: What is the preferred way to configure a PostScript printer on debian 2.2? MagicFilter did fine for mine. - - Nick - [EMAIL PROTECTED] Your mode of life will be changed for the better because of new developments. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- The major advances in civilization are processes that all but wreck the societies in which they occur. --Albert North Whitehead -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Andre Berger [EMAIL PROTECTED] from Bonn, Germany -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null I just setup my HP deskjet with CUPS from woody. Read /usr/share/doc/cupsys/README.txt.gz All I did was run the lpadmin cmd as root. In your case try: /usr/lib/lpadmin -p StColor -m stcolor.ppd -v parallel:/dev/lp0 -E This sets up the printer on the first parallel port(lp0) uses the EPSON Stylus Color driver which comes with CUPS and gives the printer the name StColor. I also added my normal user account to the lpadmin group which might be a security hole. You can then administer the printer using a browser by: http://localhost:631/ Now I have a question, a stupid one of course. When I use the CUPS web interface the first page is displayed OK as http://localhost:631/. If I click on any of the links then the browser tries to load the page by substituting my hostname(cumulus) for localhost. This workstation is behind a firewall so it doesn't have a true domain. /etc/hosts is: 127.0.0.1 localhost 192.168.1.3 cumulus /etc/hostname is: cumulus 192.168.1.3 is the NIC's static IP. Is the web browser pulling 'cumulus' from /etc/hostname? How do I tell it that 192.168.1.3 and 127.0.0.1 are the same machine? Am I misunderstanding or are *nix hostname really hostnames per IP? scott -- E-Mail: [EMAIL PROTECTED] Date: 10-Oct-2000 Time: 08:45:49 This message was sent by XFMail --
Printer configuration on debian
What is the preferred way to configure a PostScript printer on debian 2.2? This same printer was most recently configured under SuSE 6.1 using apsfilter. This is my first debian installation and I am bringing it up one resource at a time. So far, I have networking and Internet working. Thanks in advance, Dwight -- Dwight Johnson [EMAIL PROTECTED]
Printer configuration on debian - Another question
So, I have my modem running under my debian installation. Thanks to the ones who helped me. Next step (no, it's not an OS): Setting up the printer. I have printtool installed, so I'm able to set my printer up. When I run printtool and click Add, it says: lp0: there's no printer (or something like that). lp1: there's no printer. ... The problem is: The device lp0 is not bound to parport. I recompiled the kernel, installing parport issues (I think auto-detection). In the system initialization, debian gives me the message: parport0: HEWLLET-PACKARD DESKJET 690, or something like that. But when I type the command cat /proc/parport/0/devices, the only thing it says is plip. I think it should be plip lp0, shouldn't it? Or should I remove (how?) plip and bound (how?) lp0? Thanks, Gaucho
RE: Printer configuration on debian
On 09-Oct-2000 Dwight Johnson wrote: What is the preferred way to configure a PostScript printer on debian 2.2? MagicFilter did fine for mine. - - Nick - [EMAIL PROTECTED] Your mode of life will be changed for the better because of new developments.
ODP: Printer configuration on debian
Or use cups with a nice configuration tool. Mariusz On 09-Oct-2000 Dwight Johnson wrote: What is the preferred way to configure a PostScript printer on debian 2.2? MagicFilter did fine for mine. - - Nick - [EMAIL PROTECTED] Your mode of life will be changed for the better because of new developments. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Printer configuration on debian - Another question
Subject: Printer configuration on debian - Another question Date: Mon, Oct 09, 2000 at 09:19:21AM -0300 In reply to:[EMAIL PROTECTED] Quoting [EMAIL PROTECTED]([EMAIL PROTECTED]): So, I have my modem running under my debian installation. Thanks to the ones who helped me. Next step (no, it's not an OS): Setting up the printer. I have printtool installed, so I'm able to set my printer up. When I run printtool and click Add, it says: lp0: there's no printer (or something like that). lp1: there's no printer. ... The problem is: The device lp0 is not bound to parport. I recompiled the kernel, installing parport issues (I think auto-detection). In the system initialization, debian gives me the message: parport0: HEWLLET-PACKARD DESKJET 690, or something like that. But when I type the command cat /proc/parport/0/devices, the only thing it says is plip. I think it should be plip lp0, shouldn't it? Or should I remove (how?) plip and bound (how?) lp0? Have you put into your lilo.config append statement a parport statement? append = hdd=cdrom lp=parport0 parport=0x378,none The none tells my system _not_ to use an IRQ so it polls the printer instead. :-) HTH, YMMV, HAND :-) -- Real Time, adj.: Here and now, as opposed to fake time, which only occurs there and then. ___
Re: Printer configuration on debian - Another question
I think I used lp=parport0 parport=0x378,7, in my loadlin command line ... My paralell port uses IRQ 7 under windows, so I though I should use the same under debian. I'll try it out(assuming that'll work with loadlin). Thanks. In reply to:[EMAIL PROTECTED] Quoting [EMAIL PROTECTED]([EMAIL PROTECTED]): So, I have my modem running under my debian installation. Thanks to the ones who helped me. Next step (no, it's not an OS): Setting up the printer. I have printtool installed, so I'm able to set my printer up. When I run printtool and click Add, it says: lp0: there's no printer (or something like that). lp1: there's no printer. ... The problem is: The device lp0 is not bound to parport. I recompiled the kernel, installing parport issues (I think auto-detection). In the system initialization, debian gives me the message: parport0: HEWLLET-PACKARD DESKJET 690, or something like that. But when I type the command cat /proc/parport/0/devices, the only thing it says is plip. I think it should be plip lp0, shouldn't it? Or should I remove (how?) plip and bound (how?) lp0? Have you put into your lilo.config append statement a parport statement? append = hdd=cdrom lp=parport0 parport=0x378,none The none tells my system _not_ to use an IRQ so it polls the printer instead. :-) HTH, YMMV, HAND :-) -- Real Time, adj.: Here and now, as opposed to fake time, which only occurs there and then. ___ -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Printer configuration
Robert L. Harris wrote: Ok, Redhat has a neat little control panel that makes installing printers and filters very easy. Does debian have anything comparable or do I need to learn the printcap for lprng? You can use magicfilter to set up your printer. It's not like the printtool in Red Hat, but it works. kometboy
Re: Printer configuration
No cutesy graphical stuff ala Red Hat, but magicfilter has the magicfilterconfig script script which should handle it for you. On Sun, Dec 26, 1999 at 04:31:10PM -0700, Robert L. Harris wrote: Ok, Redhat has a neat little control panel that makes installing printers and filters very easy. Does debian have anything comparable or do I need to learn the printcap for lprng? Robert :wq! --- Robert L. Harris| Low quality in a product happens. Senior System Engineer |That doesn't mean it's right and at RnD Consulting. | and defintely doesn't mean it should \_ be accepted. Require quality. http://www.rnd-consulting.com/~nomad DISCLAIMER: These are MY OPINIONS ALONE. I speak for no-one else. FYI: perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);' -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Bob Nielsen, W6SWE (RN2)Internet: [EMAIL PROTECTED] Tucson, AZ DM42nhAMPRnet: [EMAIL PROTECTED] QRP-L #1985 http://www.primenet.com/~nielsen
Printer configuration
Ok, Redhat has a neat little control panel that makes installing printers and filters very easy. Does debian have anything comparable or do I need to learn the printcap for lprng? Robert :wq! --- Robert L. Harris| Low quality in a product happens. Senior System Engineer |That doesn't mean it's right and at RnD Consulting.| and defintely doesn't mean it should \_ be accepted. Require quality. http://www.rnd-consulting.com/~nomad DISCLAIMER: These are MY OPINIONS ALONE. I speak for no-one else. FYI: perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
Re: Printer configuration
I would like to know what I have to do to configure a printer. I need to configurations: 1) A local printer attached to a parallel port. I personally like magicfilter. For a local printer, I think it is as simple as 1. installing the package magicfilter 2. running magicfilterconfig 3. answering the questions it asks. 2) A remote printer that is accesed through a local area network. I don't know how to do network printing. Sorry. I'm sure there is a way to do it though. Hope this helps, Patrick
Re: Printer configuration
I don't know how to do network printing. Sorry. I'm sure there is a way to do it though. entries like this: kh-lj5:\ :lp=/dev/null:sh:\ :sd=/var/spool/lpd/kh-lj5:\ :rm=kh-lj5.somedomain.something:rp=raw will send to network printers. rick --
Printer configuration
Hello, I would like to know what I have to do to configure a printer. I need to configurations: 1) A local printer attached to a parallel port. 2) A remote printer that is accesed through a local area network. ¿Is there any tool to configure printers (as there is in RedHat)? Thanks in advance. Manuel Arenaz
Re: Slink upgrade broke printer configuration
I'm answering my own query from Saturday 20 March 1999, in case someone else has the same problem (Epson Stylus Color 400 failed after Hamm - Slink upgrade). The problem was the filter /etc/magicfilterstylus_color_720dpi-filter, from magicfilter version 1.2-28. It's good for Ghostscript version 3.33, and possibly 4.03, but not 5.50 which I am running. I replaced the PostScript section of the filter by 0 %! filter /usr/bin/gs @stc.upp -sOutputFile=\|cat 13 - 31 12 -c quit 0 \004%! filter /usr/bin/gs @stc.upp -sOutputFile=\|cat 13 - 31 12 -c quit # PDF 0 %PDFfpipe /usr/bin/gs @stc.upp -sOutputFile=\|cat 13 $FILE 31 12 -c quit using options that I found in a sample gs command at http://eunuchs.org/epson/index.html.. With this change, the filter prints PostScript (formerly, it produced infinite page ejects). There is still a flaw in the printing of text by the final default entry: there is no page eject at the end. It's clear how to write a script using cat to take care of this, but there should be a more elegant solution. Mike O'Donnell
Re: Slink upgrade broke printer configuration [Epson Stylus Color]
On Tue, 25 May 1999, Mike O'Donnell wrote: The problem was the filter /etc/magicfilterstylus_color_720dpi-filter, from magicfilter version 1.2-28. It's good for Ghostscript version 3.33, and possibly 4.03, but not 5.50 which I am running. I replaced the PostScript section of the filter by 0 %! filter /usr/bin/gs @stc.upp -sOutputFile=\|cat 13 - 31 12 -c quit 0 \004%! filter /usr/bin/gs @stc.upp -sOutputFile=\|cat 13 - 31 12 -c quit # PDF 0 %PDFfpipe /usr/bin/gs @stc.upp -sOutputFile=\|cat 13 $FILE 31 12 -c quit using options that I found in a sample gs command at http://eunuchs.org/epson/index.html.. With this change, the filter prints PostScript (formerly, it produced infinite page ejects). There is still a flaw in the printing of text by the final default entry: there is no page eject at the end. It's clear how to write a script using cat to take care of this, but there should be a more elegant solution. i had this same problem using an Epson Stylus Color 600 with the newest gs/magicfilter: infinite formfeeds when trying to print postscript files. After looking through quite a few docs and printing a few test pages, i determined that the magic filter should be using the stc600pl.upp and stc600p.upp profiles (located in /usr/lib/ghostscript/5.10). For different printers, you'd obviously use different profiles. Besides stc.upp, you may want to try stcany.upp and stc_h.upp with your 400. Also, note that stc.upp is a 360dpi profile, so putting it in stylus_color_720dpi-filter is a little misleading ;) So, i copied stylus_color_360dpi-filter and stylus_color_720dpi-filter to stylus_color600_360dpi-filter and stylus_color600_720dpi-filter, respectively. Then i changed the lines like this: --stylus_color600_360dpi-filter-- # PostScript 0 %! filter /usr/bin/gs @stc600pl.upp -q -dSAFER -dNOPAUSE -sOutputFile=- - -c quit 0 \004%! filter /usr/bin/gs @stc600pl.upp -q -dSAFER -dNOPAUSE -sOutputFile=- - -c quit # PDF 0 %PDFfpipe /usr/bin/gs @stc600pl.upp -q -dSAFER -dNOPAUSE -sOutputFile=- $FILE -c quit --stylus_color600_720dpi-filter-- # PostScript 0 %! filter /usr/bin/gs @stc600p.upp -q -dSAFER -dNOPAUSE -sOutputFile=- - -c quit 0 \004%! filter /usr/bin/gs @stc600p.upp -q -dSAFER -dNOPAUSE -sOutputFile=- - -c quit # PDF 0 %PDFfpipe /usr/bin/gs @stc600p.upp -q -dSAFER -dNOPAUSE -sOutputFile=- $FILE -c quit i had considered filing a bug report, but when i checked the database it looked like someone was already reporting it...
Epson 740 printer configuration files !
[Sorry for the massive crossposting. I found a lot of requests in the Linux newsgroups which indicates that the config files could be useful to a wider audience] On Thu, Apr 29, 1999 at 04:31:27AM -0700, John Lapeyre wrote: I got an epson 740 too. Some of the other epson drivers worked ok. I searched and found some hacked drivers, but not for the highest resolution. If its easy, could you mail me the file ? I packed my config files in a tarball at ftp://pc5.isr.uni-stuttgart.de/debian/debian-epson740.tgz They work fine for me. Greetings, Christian PS.: yes, I'll be a good boy and file a bug report soonish ;-) -- Christian Meder, email: [EMAIL PROTECTED] What's the railroad to me ? I never go to see Where it ends. It fills a few hollows, And makes banks for the swallows, It sets the sand a-blowing, And the blackberries a-growing. (Henry David Thoreau)
Re: Slink upgrade broke printer configuration
On Sat, 20 Mar 1999, Mike O'Donnell wrote: I also have noticed some strange printer behaviour. I use magicfilter, and have periodically had a printing problem with ps files after the upgrade. Once it produced another page with junk on it and the other time it printed several extra pages. Have you rerun the magicfilter config program? John I just upgraded from Hamm to Slink. Everything appears to be fine, except that my printer configuration is broken. I've hunted all the places that I know to look for the problem, to no avail. I'm using magicfilter with an Epson Stylus Color 400 printer. After the upgrade to Slink 1. ASCII prints, but the page is not ejected at the end (a minor annoyance, but perhaps a useful symptom), 2. PostScript causes an unlimited number of pages to be run through and ejected, with nothing printed on them. I've tried printing PostScript with enscript, dvips, lpr, and Lyx, with the same results. I've tried the lprng package as well as the lpr package. I checked /etc/printcap, /etc/filter.ps, /etc/filter.pcl against the older versions, and they are unchanged. /etc/init.d/lpd changed, but the changes appear to have to do only with control of starting and stopping the daemon, rather than actual print configuration. What other locations for printer configuration am I overlooking? Thanks, Mike O'Donnell [EMAIL PROTECTED] -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null John Maheuphone (780) 492-2049 University of Alberta fax(780) 492-3300 Dept. of Economicsemail [EMAIL PROTECTED] Edmonton, Alberta Canada, T6G 2H4
Slink upgrade broke printer configuration
I just upgraded from Hamm to Slink. Everything appears to be fine, except that my printer configuration is broken. I've hunted all the places that I know to look for the problem, to no avail. I'm using magicfilter with an Epson Stylus Color 400 printer. After the upgrade to Slink 1. ASCII prints, but the page is not ejected at the end (a minor annoyance, but perhaps a useful symptom), 2. PostScript causes an unlimited number of pages to be run through and ejected, with nothing printed on them. I've tried printing PostScript with enscript, dvips, lpr, and Lyx, with the same results. I've tried the lprng package as well as the lpr package. I checked /etc/printcap, /etc/filter.ps, /etc/filter.pcl against the older versions, and they are unchanged. /etc/init.d/lpd changed, but the changes appear to have to do only with control of starting and stopping the daemon, rather than actual print configuration. What other locations for printer configuration am I overlooking? Thanks, Mike O'Donnell [EMAIL PROTECTED]
Redhat Printer Configuration File For Debian?
Hello! I noticed someone mentioned about a printer configuration tool from Redhat under X Windows which got my interest. Is there a specific rpm or hopefully... a Deb version of it so I can get and install to see if I can get this stupid printer that is attached to the Win95 workable from Samba on my linux? I am just pulling my hairs on this problem and I was resigned from this task til someone mentioned about that printer tool from Redhat. Naturally.. I could not locate the correct one and frankly.. I do not want to go searching for it and install several wrong versions til I find the right one and then search around again and toss the wrong one out of the windows. Just to say for sake of finding a needle in the haysack. :) -- Date: 03-Feb-99 Time:13:53:38 Russell Rademacher Grapevine2 Technical Support Specialist Pager: 800-480-9498 #1041 Phone: 716-214-5644 Fax: 716-214-5642 TDD: 716-214-5643 ICQ: 10663810 AIM: ElikCyber --
Printer configuration
I'm running hamm and wanted to set up a printer (HP OfficeJet). I want PostScript files to be automatically filtered using ghostscript, and text files to be printed in Courier. Under Red Hat there was a GUI tool that was really easy to set up, but under Debian I'm at a loss. Is there a FAQ or something on this? I looked and couldn't find one. --Bill. -- William R Ward Bay View Consulting http://www.bayview.com/~hermit/ [EMAIL PROTECTED] 1803 Mission St. #339voicemail +1 831/479-4072 [EMAIL PROTECTED] Santa Cruz CA 95060 USA pager +1 831/458-8862 PGP Key 0x2BD331E5; Public key at http://www.bayview.com/~hermit/pubkey.txt - Paradise is exactly like where you are right now, only much, much better. --Laurie Anderson (Language Is a Virus / Home of the Brave)
Re: Printer configuration
William R Ward wrote: I'm running hamm and wanted to set up a printer (HP OfficeJet). I want PostScript files to be automatically filtered using ghostscript, and text files to be printed in Courier. Have you tried package magicfilter? If you install it, you will have the following filters: bj10e-filter bj200-filter bj600-filter bj600_draft-filter cps300-filter cps400-filter cps600-filter cpsonly300-filter cpsonly400-filter cpsonly600-filter deskjet-filter dj500-filter dj500c-filter dj550c-filter epson9-filter epson9c-filter epsonlq-filter epsonlqc-filter ibmpro-filter jetp3852-filter la50-filter la75-filter laserjet-filter laserjetlo-filter lbp8-filter lj250-filter ljet2p-filter ljet2plo-filter ljet3-filter ljet4-filter ljet4l-filter ljet4m-filter ljet4ml-filter ljetplus-filter ljetpluslo-filter ln03-filter m8510-filter necp6 -filter oki182-filter pj-filter pjxl-filter pjxl300-filter ps300-filter ps400-filter ps600-filter psonly300-filter psonly400-filter psonly600-filter r4081-filter stylus800-filter stylus_color_360dpi-filter stylus_color_720dpi-filter tek4693-filter tek4696-filter Just choose the closest to your printer and modify it. For example, with dj550c-filter file I have made a dj670c-filter file for my HP Deskjet 670C) by only changing the -r300 to -r600 in the lines: # PostScript 0 %! filter /usr/bin/gs -q -dSAFER -dNOPAUSE -r300 -sDEVICE=cdj550 -sOutputFile=- - 0 \004%! filter /usr/bin/gs -q -dSAFER -dNOPAUSE -r300 -sDEVICE=cdj550 -sOutputFile=- - # PDF 0 %PDFfpipe /usr/bin/gs -q -dSAFER -dNOPAUSE -r300 -sDEVICE=cdj550 -sOutputFile=- $FIL -- Conrado Badenas (Assistant Lecturer) Department of Thermodynamics. University of Valencia c/. Doctor Moliner, 50 | e-m: [EMAIL PROTECTED] 46100 Burjassot (Valencia) | Phn: +34-63864350 SPAIN| Fax: +34-63983385
Re: Remote printer configuration
Hi, your set up looks fine (we have the same set up as you here at our office, JetDirect's work fine with the Debian/Linux lpr package). What you need to do to get rid of that banner page is to telnet to the JetDirect box and disable the banner page: canaima:~# telnet hplj4p Trying 130.151.17.167... Connected to hplj4p.ven.ra.rockwell.com. Escape character is '^]'. Please type [Return] two times, to initialize telnet configuration For HELP type ? banner:0 quit ===JetDirect Parameters Configured=== IP Address : 130.151.17.167 Subnet Mask : 255.255.255.128 Default Gateway : 130.151.17.129 Syslog Server : 0.0.0.0 Idle Timeout: 90 Seconds Set Cmnty Name : Not Specified DHCP Config : Disabled Passwd : Disabled Novell : Enabled DLC/LLC : Disabled Ethertalk : Disabled Banner page : Disabled User Quitting Connection closed by foreign host. Of course, you should do telnet 198.37.24.188. Type ? when you are logged in to you JetDirect to get help. Hope this helps. E.- Carlo U. Segre ([EMAIL PROTECTED]) wrote: : ls178_hp4m|First Floor Department LaserJet:\ : :lp=/dev/null:\ : :rm=198.37.24.188:\ : :rp=text:\ : :sd=/var/spool/lpd/ls178_hp4m:\ : :sh:pw#80:pl#66:px#1440:mx#0:\ : :af=/var/log/lp-acct:\ : :lf=/var/log/lp-errs: : : The rp=text is required to give the proper CRLF sequence when printing : text files from Linux. The printer is set up to autoswitch to postscript : and PCL and this works fine. The problem is that every job I print has a : trailer page with the information about where the print job came from. : : Is this a feature of the Linux lpd? I haven't been able to find anything : in the printer documents aobut this so I need to knowif anyone has heard : of this in Linux. I looked in the Linux docs but no mention there either. -- Eloy A. Paris Information Technology Department Rockwell Automation de Venezuela Telephone: +58-2-9432311 Fax: +58-2-9430323 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Remote printer configuration
Hello All: I have been settin up one of our Debian machines to serve as a departmental printer server for Macs and Windows95 machines. The problem I am having is with an HP LaserJet 4m+ with JetDirect card. The printer has its own IP number and it is directly connected to the network. I have set up a printcap as follows on my Debian box: ls178_hp4m|First Floor Department LaserJet:\ :lp=/dev/null:\ :rm=198.37.24.188:\ :rp=text:\ :sd=/var/spool/lpd/ls178_hp4m:\ :sh:pw#80:pl#66:px#1440:mx#0:\ :af=/var/log/lp-acct:\ :lf=/var/log/lp-errs: The rp=text is required to give the proper CRLF sequence when printing text files from Linux. The printer is set up to autoswitch to postscript and PCL and this works fine. The problem is that every job I print has a trailer page with the information about where the print job came from. Is this a feature of the Linux lpd? I haven't been able to find anything in the printer documents aobut this so I need to knowif anyone has heard of this in Linux. I looked in the Linux docs but no mention there either. Help! I really don't want to waste the extra sheet of paper each job. Carlo *** *Carlo U. Segre * * Department of Biological, Chemical and Physical Sciences * *Illinois Institute of Technology, Chicago, IL 60616 * * Voice: (312) 567-3498 FAX: (312) 567-3494* *[EMAIL PROTECTED]* *** -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .