Re: No sound support for KDE
On Tuesday 25 July 2006 07:26, Markus Petermann wrote: Hello, I have a problem with the audio output of KDE 3.5.3 (the KDE version currently used by Debian Etch Testing): There is absolutely no sound output. After the first launch of KDE I got a pop-up with the error message: Sound server information message: Error while initializing sound driver: device: default can't be opened for playback (No such device) The sound server will continue, using the null output device. [...] I suggest disabling the KDE sound system, to see if you can play soundfiles with any apps that don't use it. If that works, you know aRTs is the culprit. You can either not use it (this works for me); or you can try to find out why the device default is not found. Try using the Override device location option in Sound system Hardware and make it something like hw:0 or hw:1, (press Apply for each attempt and see if the error message reappears). If these fail, try putting in the path to your actual sound device - you'll have to hunt that down in /dev. Something that can also help to clearly define sound devices is to have a ~.asoundrc file, which google will tell you about! Hope this helps and good luck, John -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: No sound support for KDE
Hi, Nate Bargmann wrote: Sound server information message: Error while initializing sound driver: device: default can't be opened for playback (No such device) The sound server will continue, using the null output device. Make sure your username is a member of the 'audio' group. My user is in the group audio. Precautionly a changed the access rights for owner, group and all to rwx for the devices /dev/dsp /dev/dsp1 /dev/mixer /dev/mixer1 /dev/rtc /dev/snd/* After this I started alsaconf again - without effect. Greetings, Markus -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: No sound support for KDE
Hello, John O'Hagan wrote: I suggest disabling the KDE sound system, to see if you can play soundfiles with any apps that don't use it. I shutdowned KDE with /etc/init.d/kdm stop and tried aplay /usr/share/sound/ Did not work. Try using the Override device location option in Sound system Hardware and make it something like hw:0 or hw:1, (press Apply for each attempt and see if the error message reappears). If these fail, try putting in the path to your actual sound device - you'll have to hunt that down in /dev. When I type hw:1 I get the reported error message again. No effect with hw:0, but also no sound. Something that can also help to clearly define sound devices is to have a ~.asoundrc file, which google will tell you about! I have to check this one first. I tried the default configuration from http://www.alsa-project.org/alsa-doc/doc-php/asoundrc.php and used aplay to play a WAV file, but this only causes an error: aplay: set_params:906: Channels count non available -- Greetings, Markus -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
No sound support for KDE
Hello, I have a problem with the audio output of KDE 3.5.3 (the KDE version currently used by Debian Etch Testing): There is absolutely no sound output. After the first launch of KDE I got a pop-up with the error message: Sound server information message: Error while initializing sound driver: device: default can't be opened for playback (No such device) The sound server will continue, using the null output device. I started kcontrol / Sound / Sound System / Hardware and activated the ALSA sound system. I installed the remaining alsa packages and ran alsaconf. Then I used alsamixer and unmuted all channels (both actions as root). I also used alsamixer as normal user and of cause kmix - no effect. Due to Bug report #362282 I replaced libasound2 with version 1.0.11-7 - no effect. After this I used the module-assistent to build the ALSA module drivers, installed them and run alsaconf and alsamixer again - no effect. I have two remarks concerning this issue: 1. The ALSA sound system works with Debian Sarge. 2. I tested two other distributions (Kubuntu 6.06 and SusSE 10.1) in the last weeks: I had no sound on both distributions. On Ubuntu 6.06 (using GNOME) audio is available (but I have no idea about the used sound system). Here is a dump of the loaded sound modules: saturn:~$ lsmod | grep snd snd_intel8x0m 15372 0 snd_intel8x0 29436 3 snd_ac97_codec 82784 2 snd_intel8x0m,snd_intel8x0 snd_ac97_bus2048 1 snd_ac97_codec snd_pcm_oss43520 0 snd_mixer_oss 15584 1 snd_pcm_oss snd_pcm74408 5 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 20292 2 snd_pcm snd46080 11 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 8672 1 snd snd_page_alloc 9800 3 snd_intel8x0m,snd_intel8x0,snd_pcm Here is a hardware overview: saturn:~$ lspci 00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [FireGL 9000] (rev 01) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20) 02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) 02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) I am looking forward for some help. Greeting, Markus -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: No sound support for KDE
* Markus Petermann [EMAIL PROTECTED] [2006 Jul 24 17:34 -0500]: Hello, I have a problem with the audio output of KDE 3.5.3 (the KDE version currently used by Debian Etch Testing): There is absolutely no sound output. After the first launch of KDE I got a pop-up with the error message: Sound server information message: Error while initializing sound driver: device: default can't be opened for playback (No such device) The sound server will continue, using the null output device. Make sure your username is a member of the 'audio' group. - Nate -- Wireless | Amateur Radio Station N0NB | Successfully Microsoft Amateur radio exams; ham radio; Linux info @ | free since January 1998. http://www.qsl.net/n0nb/ | Debian, the choice of My Kawasaki KZ-650 SR @| a GNU generation! http://www.networksplus.net/n0nb/ | http://www.debian.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ADI 1980 sound support
This card has drivers on the asus website, YMMV, I've yet to get them working though. It's not listed on the alsa website yet either as a supported card. chris On 17 Jul 2003 11:55:46 +0100 Andrew Ingram [EMAIL PROTECTED] wrote: I'm looking to build an HTPC running Debian. The case I want requires a micro-ATX form factor motherboard and I have found one which looks good: the ASUS P4P800-VM. I want as many things onboard as possible since you do not get many PCI cards on a micro-ATX mobo. This mobo has the onboard sound chipset ADI 1980. Can anyone tell me if this is supported under Debian? I have had a quick google and have not found anything conclusive, just wondered if anyone on this list happened to know about it. Thanks, Andy -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
ADI 1980 sound support
I'm looking to build an HTPC running Debian. The case I want requires a micro-ATX form factor motherboard and I have found one which looks good: the ASUS P4P800-VM. I want as many things onboard as possible since you do not get many PCI cards on a micro-ATX mobo. This mobo has the onboard sound chipset ADI 1980. Can anyone tell me if this is supported under Debian? I have had a quick google and have not found anything conclusive, just wondered if anyone on this list happened to know about it. Thanks, Andy -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
sound support
Hello all. My experience with debian has been great so far. When first started using, I had gotten my sound blaster isa sound card working without much probs. Now, since upgrading to a SB Audigy, I just cant seem to get it working. Does anyone know of a good site for tutorial/walkthrough to help out with this. I wouldn't mind having my hand held on this one:) Later, James -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: sound support
On Thu, 03 Jul 2003 18:30:16 +0200, james leclair wrote: Now, since upgrading to a SB Audigy, I just cant seem to get it working. I don't have a tutorial at hand, but just look around you. The Audigies and their problems are discussed quite often on this list. -- Best Regards, | Hi! I'm a .signature virus. Copy me into Sebastian | your ~/.signature to help me spread! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: sound support
On Thu, Jul 03, 2003 at 10:44:59AM -0300, james leclair wrote: Now, since upgrading to a SB Audigy, I just cant seem to get it working. Does anyone know of a good site for tutorial/walkthrough to help out with this. The kernel doesn't support the Audigy. You need to use the SourceForge driver. -- Marc Wilson | The good life was so elusive It really got me [EMAIL PROTECTED] | down I had to regain some confidence So I got into | camouflage -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: sound support
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thu, Jul 03, 2003 at 10:44:59AM -0300, james leclair wrote: much probs. Now, since upgrading to a SB Audigy, I just cant seem to get it working. Does anyone know of a good site for tutorial/walkthrough to help Should be a matter of editing /etc/modules and replacing the line reading sb with the correct module for your audigy. - -- .''`. Paul Johnson [EMAIL PROTECTED] : :' :proud Debian admin and user `. `'` `- Debian - when you have better things to do than fix a system -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/BOn3J5vLSqVpK2kRAr7AAKCwXxOfjnop8ojbtNEzRek4XJiPywCghO1y z0+gmGBG4fPbwsbiqX28w1g= =sqGO -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
terminal descriptions: how to get the terminfo source packages and/or add in sound support
Hi, I'd like to get the terminfo source packages so I can recompile one to support the bell sound (which doesn't seem to work) Could anybody help me out with the right apt-get cmd or whatever? thx, wim -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: terminal descriptions: how to get the terminfo source packages and/or add in sound support
On Mon, Jan 06, 2003 at 08:48:19PM +0100, Wim De Smet wrote: I'd like to get the terminfo source packages so I can recompile one to support the bell sound (which doesn't seem to work) Could anybody help me out with the right apt-get cmd or whatever? After installing libncurses5-dev (apt-get install libncurses5-dev), try reading terminfo(5), tic(1), and infocmp(1). -- Seneca [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Trouble with sound support in compiling 2.4.x kernel
In October 2001 I described to this list how I'd managed to get my WinBook XL's Yamaha OPL3-SAx soundcard going under Linux with kernel 2.4.9. Among other things, I included CONFIG_SOUND_ADLIB=y, CONFIG_SOUND_YM3812=y and CONFIG_SOUND_OPL3SA2=y in my kernel's .config file; at the time, these seemed to relate to the corresponding modules adlib_card, opl3, opl3sa2, ad1848, mpu401. However, upgrading to later 2.4.9 source had my kernel compiles die with sounddrivers.o having an undefined reference to 'unload_mpu401'. This also happens with the 2.4.17 I'm trying instead. I've been playing with CONFIG_SOUND_OSS, CONFIG_SOUND_AD1816, CONFIG_SOUND_ADLIB, CONFIG_SOUND_MPU401, CONFIG_SOUND_YM3812, CONFIG_SOUND_OPL3SA2. Can anyone tell me which combination of '=y's might work, or at least which ones definitely won't so I can skip trying them? (Of course, I pass appropriate adlib, opl, opl3sa2 parameters to the kernel in my lilo.conf, but that's clearly not the problem here.) Thanks, Mark -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Sound Support
On Tue, 17 Jul 2001, Case, Benjamin wrote: I apt-got the kernel-source-2.4.6. I have compiled a kernel and it works great. I just d/l the source for pcmcia-cs and comiled that and I use that module now too. I just realized I forgot the modules for my Soundblaster. How can I add the necessary modules for this card without having to re-compile? Hello, you have to recompile anyway. But it might not be necesary to reboot. If you have enabled sound support in the kernel, but forgot to enable the needed module, simply run 'make menuconfig', enable the drivers, 'make dep' and 'make modules'. Because the changes to the kernel are relatively small, the new modules have the same version as the old modules. You can verify this by 'insmod /usr/src/linux/drivers/sound/emu10k1.o' for example. If the kernel does not complain about wrong module versions you can do 'make modules_install' and your new sound modules will be available after a 'depmod -a', without rebooting or installing a new kernel. However, if you configured your kernel with sound support disabled, you really need to recompile the entire kernel. Greetz, Sebastiaan
Sound Support
I apt-got the kernel-source-2.4.6. I have compiled a kernel and it works great. I just d/l the source for pcmcia-cs and comiled that and I use that module now too. I just realized I forgot the modules for my Soundblaster. How can I add the necessary modules for this card without having to re-compile? ben
sound support for Turtle Beach Santa Cruz
Hi All, I was wondering if anyone knows anything about the Turtle Beack Santa Cruz. I noticed that some of there other cards are supported in the 2.4 kernel (I think the 2.2. as well). Any help, hints, words of wisdom . . . would be greatly appreciated. Thanks, Andy
Re: helix gnome sound support not working
Moritz == Moritz Schulte [EMAIL PROTECTED] writes: Moritz Do you have xmms configured to use the esd output plugin? Moritz (I've no idea about the other programs...) I would have thought this was the default. Oh, wait, no, its trying to use the OSS plugin. Thanks for your suggestion. xmms works now. I wonder why gnome applications can't play sound (eg. gnome-control-centre). -- Brian May [EMAIL PROTECTED]
helix gnome sound support not working
Hello, I have not been able to get sound support working under Helix Gnome for several weeks now. esdplay works fine, but no Gnome programs work (xmms and Gnome Control Centre for instance). (xmms works if I kill esd first). Any ideas? -- Brian May [EMAIL PROTECTED]
Re: helix gnome sound support not working
Brian May [EMAIL PROTECTED] writes: I have not been able to get sound support working under Helix Gnome for several weeks now. esdplay works fine, but no Gnome programs work (xmms and Gnome Control Centre for instance). Do you have xmms configured to use the esd output plugin? (I've no idea about the other programs...) moritz -- Moritz Schulte [EMAIL PROTECTED] http://www.chaosdorf.de/moritz/ Debian/GNU supporter - http://www.debian.org/ http://www.gnu.org/ GPG fingerprint = 3A14 3923 15BE FD57 FC06 B501 0841 2D7B 6F98 4199
Compiling sound support for sblive
Hello all ye Debian users, Im new to Debian and this list, hope the question hasn't been answered yet. When trying to compile the sblive module, with my new own kernel headers i get a 8390.ver file not found in the kernel headers. Does anyone has a hint as to what mudules I have to select to get the required '/usr/src/linux/include/linux/modules/8390.ver' ? Thank you. Jean-Baptiste Note, from France.
Re: ESS sound support ?
Goeman Stefan [EMAIL PROTECTED] writes: Hello, I have an ESS (Maesto-2 ?) sound card in my PC. From the debian web page I found out that this card is not supported. Does anybody knows how to get the card active ?? try http://www.linuxhardware.net -- Felix Natter
Re: ESS sound support ?
On 28 Jun 2000, Felix Natter wrote: Goeman Stefan [EMAIL PROTECTED] writes: Hello, I have an ESS (Maesto-2 ?) sound card in my PC. From the debian web page I found out that this card is not supported. Does anybody knows how to get the card active ?? try http://www.linuxhardware.net % dmesg ... maestro: version 0.13 time 11:34:26 Apr 25 2000 maestro: Configuring ESS Maestro 2E found at IO 0xFF00 IRQ 11 maestro: subvendor id: 0x00011179 maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf maestro: 1 channels configured. ... I use one in my notebook. It works since 2.2.12 (or before, I'm not sure) []s, -- Marcio /*** * MARCIO ROSA DA SILVAe-mail: [EMAIL PROTECTED] * Assistant Professor [EMAIL PROTECTED] * Electrical Engineering Department * Universidade do Vale do Rio dos Sinos - UNISINOS * Av. Unisinos, 950 * Sao Leopoldo - RS - Brazil * Phone: +55 51 590- R:1781/1782 * FAX: +55 51 590-8172 * http://www.eletrica.unisinos.br/~marcio ***/
ESS sound support ?
Hello, I have an ESS (Maesto-2 ?) sound card in my PC. From the debian web page I found out that this card is not supported. Does anybody knows how to get the card active ?? Greetings, Stefan Goeman.
Sound support enabled in 2.2 kernel deb package?
Hi, all, I am considering installing ALSA Sound drivers for my Ultrasound MAX card. However, ALSA drivers require the general sound support be enabled in the 2.2 series kernel (I personally use 2.2.10). So is there anyone can tell me if this general sound support enabled by default in the 2.2 series kernel deb package? Thanks in advance. Best regards, -- Chia-Sheng Chang Institute of Communications Engineering College of Electrical Engineering National Taiwan University Taipei, Taiwan 10617 E-Mail: [EMAIL PROTECTED]
Re: Sound support enabled in 2.2 kernel deb package?
Chia-Sheng Chang hat gesagt: // Chia-Sheng Chang wrote: I am considering installing ALSA Sound drivers for my Ultrasound MAX card. However, ALSA drivers require the general sound support be enabled in the 2.2 series kernel (I personally use 2.2.10). So is there anyone can tell me if this general sound support enabled by default in the 2.2 series kernel deb package? Thanks in advance. I don't know, but you can have a look in the Config-Files under /boot e.g /boot/config-2.2.13 Search for CONFIG_SOUND! -- ____ Frank Barknecht __ __ trip\ \ / /wire __ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / / / / / // // /\ \\ ___\\ \ /_/ /_/ /_/ /_//_// / \ \\_\\_\ /_/\_\
Re: Fwd: [lug] recompiling kernel and not loosing sound support
Try This edit the Makefile and uncomment the SMP lines make mrproper make menuconfig (select Sound Support with a 'Y') -Select the correct drivers -(If sound blaster set io, irq etc.) -in the 2.0.34 kernel there is a setting to Use the old sound configuration script--USE IT it does something (I dont know what) make boot I use make zImage make modules mv /lib/modules/2.0.34 /lib/modules/2.0.34-old make modules_install mv /boot/vmlinuz /boot/vmlinuz-old cp zImage /boot/vmlinuz edit lilo.conf to have a backup boot option of the old kernel labeling the old kernel old and new kernel linux. lilo and then reboot. email : [EMAIL PROTECTED] url : http://ophir.frcc.ccoes.edu/~mroque Good Luck and Good Hunting Jeff Katcher
Re: Fwd: Re: [lug] recompiling kernel and not loosing sound support
I had something of the same problem - turned out that my SB-compatible card is on IRQ 5 instead of default 7, I change the setting in /usr/src/linux/drivers/sound/Config.in and all worked well. It could be something similar, maybe IRQ or DMA conflict... good luck --- Just call me a sugar vampire D'jinnie/Jinn, encountered on IRC and select MU**. ([EMAIL PROTECTED]) finger [EMAIL PROTECTED] for PGP public key
Fwd: Re: [lug] recompiling kernel and not loosing sound support
Manny: Your original post was sent to me instead of to the list; I forwarded it, and apparently someone just clicked on Reply and so it replied to me. You might want to make sure your next post gets sent to debian-user@lists.debian.org so any further replies get to you properly. X-Authentication-Warning: central.boulder.nist.gov: majordom set sender to owner-lug using -f Delivered-To: [EMAIL PROTECTED] From: LJP [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [lug] recompiling kernel and not loosing sound support Date: Sun, 4 Oct 1998 17:30:04 -0600 X-Mailer: Microsoft Outlook Express 4.72.3155.0 Sender: [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] What are the modules that you have in /lib/modules/2.0.34? Are they the same as the old modules that work? Do you insmod them? I dont know much about dual processors, but you might try one of the development kernels, they are SMP by default. -Original Message- From: Manny Roque [EMAIL PROTECTED] To: [EMAIL PROTECTED] [EMAIL PROTECTED] Date: Sunday, October 04, 1998 3:57 PM Subject: [lug] recompiling kernel and not loosing sound support hello all, I have been running into problems when I go to rebuild a kernel. If I do a fresh install of Linux I have sound support. When I go to rebuild the kernel so that it can use 2 processors I loose my sound support. I do set up the kernel to have sound support but I still have problems. I do the rebuild like this: edit the Makefile and uncomment the SMP lines make mrproper make menuconfig (select Sound Support with a 'Y') make boot make modules mv /lib/modules/2.0.34 /lib/modules/2.0.34-old make modules_install mv /boot/vmlinuz /boot/vmlinuz-old cp zImage /boot/vmlinuz edit lilo.conf to have a backup boot option of the old kernel labeling the old kernel old and new kernel linux. lilo and then reboot. It seems that this would work but it does not. I'm thinking that the make modules step is messing up my existing sound module support. But I don't know anything as to how modules work much less when you rebuild a kernel. If anyone can help me out with this I would greatly appreciate it. Sincerely, Manny Roque email : [EMAIL PROTECTED] url : http://ophir.frcc.ccoes.edu/~mroque - Boulder Linux Users Group: http://lug.boulder.co.us - - Boulder Linux Users Group: http://lug.boulder.co.us - Kent West, Technology Support [EMAIL PROTECTED] Abilene Christian Univ., Abilene, TX 915-674-2557 FAX: 915.674.6724 Amateur Radio: KC5ENO Debian Linux: Ride the wave with the penguins!
Fwd: [lug] recompiling kernel and not loosing sound support
Forwarded: X-Authentication-Warning: central.boulder.nist.gov: majordom set sender to owner-lug using -f Date: Sun, 4 Oct 1998 15:36:46 -0600 (MDT) From: Manny Roque [EMAIL PROTECTED] X-Sender: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [lug] recompiling kernel and not loosing sound support Sender: [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] hello all, I have been running into problems when I go to rebuild a kernel. If I do a fresh install of Linux I have sound support. When I go to rebuild the kernel so that it can use 2 processors I loose my sound support. I do set up the kernel to have sound support but I still have problems. I do the rebuild like this: edit the Makefile and uncomment the SMP lines make mrproper make menuconfig (select Sound Support with a 'Y') make boot make modules mv /lib/modules/2.0.34 /lib/modules/2.0.34-old make modules_install mv /boot/vmlinuz /boot/vmlinuz-old cp zImage /boot/vmlinuz edit lilo.conf to have a backup boot option of the old kernel labeling the old kernel old and new kernel linux. lilo and then reboot. It seems that this would work but it does not. I'm thinking that the make modules step is messing up my existing sound module support. But I don't know anything as to how modules work much less when you rebuild a kernel. If anyone can help me out with this I would greatly appreciate it. Sincerely, Manny Roque email : [EMAIL PROTECTED] url : http://ophir.frcc.ccoes.edu/~mroque - Boulder Linux Users Group: http://lug.boulder.co.us - Kent West, Technology Support [EMAIL PROTECTED] Abilene Christian Univ., Abilene, TX 915-674-2557 FAX: 915.674.6724 Amateur Radio: KC5ENO Debian Linux: Ride the wave with the penguins!
Sound Support
Does linux support Beach™ A3D 64-Voice Sound Cards? curt -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Sound Support
On 23 Jul, Curt E. Spann wrote: Does linux support Beach™ A3D 64-Voice Sound Cards? I have a TB Montego A3D card and haven't been able to get it to work (if anyone has, please speak up! :-) I checked with OSS about a month ago and they had a timetable of late July/August for a driver for that card... /Michael -- | Linux: Turn on...Tune in...Fork out... | | Michael Tempsch, member of Ballistic Wizards, TIP#088, POG#130, PPIG#11 | | [EMAIL PROTECTED]|hotmail.com] [EMAIL PROTECTED]| | Cell.Phone:+46 705487554 URL:http://www.dtek.chalmers.se/%7Ed1temp | -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
IPX and Sound support from rescue disk
Dear all, I'm thinking of installing hamm on another machine, and I would like to know - can I configure sound and IPX support during the initial install, or do I have to recompile later? Yours, Matthew -- Elen sila lumenn' omentielvo Steward-elect of the Cambridge Tolkien Society Selwyn College Computer Support http://www.geocities.com/Area51/Chamber/8841/ http://www.cam.ac.uk/CambUniv/Societies/tolkien/ http://pick.sel.cam.ac.uk/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Sound support in kernel-image-2.0.30
why don't you simply use make-kpkg to compile the kernel? Will Lowe wrote: On Sat, 4 Oct 1997, Tom Ed White wrote: How can I find out which sound cards, if any, are supported in this kernel image? If you're using the standard debian-installed kernel, I don't think ANY are automatically supported. I want to know if I need to recompile my kernel for sound. I suspect that many of the drivers are already there, since the device file is present. There's no way to get around compiling the kernel. This isn't such a bad thing, as the kernel-install process is simple enough that a trained monkey can do it :). Assuming you've installed the kernel-source.2.0.30.deb, it's 1) determine your soundcard configuration (DMA, IRQ, addresses, etc.) 2) as root, a) cd /usr/src/linux b) make menuconfig (or make xconfig, if you're running x and tcl/tk) c) select sound and follow the prompts at this point, take a look at the other stuff in your kernel; if you don't have scsi, disable scsi support, etc makes the kernel smaller and faster --- you'll probably also want to make sound a module, unless you use your sound card 24/7 3) make dep 4) make clean 5) make zImage 6) make modules 7) make modules_install 8) mv /vmlinuz /mvlinuz.old (or some other backup name) 9) cp /usr/src/linux/arch/i386/boot/zImage /vmlinuz 10) modify /etc/lilo.conf to have a stanze for each kernel -- keep the old one around until you've run the new one a while (you might instead make the new kernel into a boot disk, so you don't have to play with lilo.conf yet -- to do this make zdisk with a disk in the drive) 11) run lilo and then reboot Email with questions. Will [EMAIL PROTECTED] [EMAIL PROTECTED] http://www.cis.udel.edu/~lowe/ * Good Idea: Feeding Stray Cats in the Park. Bad Idea: Feeding Stray Cats in the park ... to a bear. * -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] . -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Sound support in kernel-image-2.0.30
On Sat, 4 Oct 1997, Lucas wrote: Hi, Could someone please help me interpret the following messages: during boot: /dev/hda3 (my Linux part.) has reached maximal mount count ... forced check This is a harmless message. If you mount and unmount an ext2 partition a certain number of times, fsck checks it just to make sure it doesn't contain any errors. On an ext2 partition there is a counter which is reset when you check it. When you unmount a partition (I think it is then) it is increased by one. When the counter reaches a certain value (I believe 20 or 25), the partition is checked the next time you run fsck on it, no matter what. second message (only as regular user, not as root): $man [whatever] (the man page does display, but with a message that obviously concerns permissions:) man: can't create /var/catman/cat1/XXX(some number) man: can't unlink /var/catman/cat1/XXX: Permission denied This could mean /var/catman has, somehow, got the wrong permissions. You can correct this by running these two commands as root: # rm -rf /var/catman # mkcatdirs man root 0755 For an explanation of the mkcatdirs command, run it with no parameters. Remco -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Sound support in kernel-image-2.0.30
How can I find out which sound cards, if any, are supported in this kernel image? I want to know if I need to recompile my kernel for sound. I suspect that many of the drivers are already there, since the device file is present. Thanks, Tom Ed White -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Sound support in kernel-image-2.0.30
Hi, Could someone please help me interpret the following messages: during boot: /dev/hda3 (my Linux part.) has reached maximal mount count ... forced check second message (only as regular user, not as root): $man [whatever] (the man page does display, but with a message that obviously concerns permissions:) man: can't create /var/catman/cat1/XXX(some number) man: can't unlink /var/catman/cat1/XXX: Permission denied Thanx-a-million YABBADABBADOO -- Lucas Liacopoulossome assembly required ... NOT!! [EMAIL PROTECTED] Concordia U.V. Montreal Canada -- -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Sound support in kernel-image-2.0.30
On Sat, 4 Oct 1997, Tom Ed White wrote: How can I find out which sound cards, if any, are supported in this kernel image? If you're using the standard debian-installed kernel, I don't think ANY are automatically supported. I want to know if I need to recompile my kernel for sound. I suspect that many of the drivers are already there, since the device file is present. There's no way to get around compiling the kernel. This isn't such a bad thing, as the kernel-install process is simple enough that a trained monkey can do it :). Assuming you've installed the kernel-source.2.0.30.deb, it's 1) determine your soundcard configuration (DMA, IRQ, addresses, etc.) 2) as root, a) cd /usr/src/linux b) make menuconfig (or make xconfig, if you're running x and tcl/tk) c) select sound and follow the prompts at this point, take a look at the other stuff in your kernel; if you don't have scsi, disable scsi support, etc makes the kernel smaller and faster --- you'll probably also want to make sound a module, unless you use your sound card 24/7 3) make dep 4) make clean 5) make zImage 6) make modules 7) make modules_install 8) mv /vmlinuz /mvlinuz.old (or some other backup name) 9) cp /usr/src/linux/arch/i386/boot/zImage /vmlinuz 10) modify /etc/lilo.conf to have a stanze for each kernel -- keep the old one around until you've run the new one a while (you might instead make the new kernel into a boot disk, so you don't have to play with lilo.conf yet -- to do this make zdisk with a disk in the drive) 11) run lilo and then reboot Email with questions. Will [EMAIL PROTECTED] [EMAIL PROTECTED] http://www.cis.udel.edu/~lowe/ * Good Idea: Feeding Stray Cats in the Park. Bad Idea: Feeding Stray Cats in the park ... to a bear. * -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Sound support in kernel-image-2.0.30
Hello Tom! You don't have any sound drivers installed by default, although all the device drivers are there. E.g. you have scsi devices even if you don't posess a scsi drive. Look at: /usr/src/linux/drivers/sound/Readme.cards for a list of supported sound cards. You get this file if you install the kernel sources. If you have a SB AWE, you can install the AWE patches (some debian packages) for midi support. You can also buy the commercial version of OSS sound driver. Obviously, you need to recompile the kernel. Try the kernel package for that, it is a lot easier than the canonical way. If you have any more questions, write to the list. PS: Try the Sound-HOWTO for more information. Marcus On Sat, Oct 04, 1997 at 12:21:08PM -0400, Tom Ed White wrote: How can I find out which sound cards, if any, are supported in this kernel image? I want to know if I need to recompile my kernel for sound. I suspect that many of the drivers are already there, since the device file is present. Thanks, Tom Ed White -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] . -- Rhubarb is no Egyptian god. Marcus Brinkmann [EMAIL PROTECTED] http://homepage.ruhr-uni-bochum.de/Marcus.Brinkmann/ -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Sound support in kernel-image-2.0.30
should have gone to the list, too ... -Forwarded message from Marcus Brinkmann [EMAIL PROTECTED]- To: Will Lowe [EMAIL PROTECTED] Subject: Re: Sound support in kernel-image-2.0.30 References: [EMAIL PROTECTED] [EMAIL PROTECTED] Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.84 In-Reply-To: [EMAIL PROTECTED]; from Will Lowe on Sat, Oct 04, 1997 at 05:05:34PM -0400 On Sat, Oct 04, 1997 at 05:05:34PM -0400, Will Lowe wrote: On Sat, 4 Oct 1997, Tom Ed White wrote: I want to know if I need to recompile my kernel for sound. I suspect that many of the drivers are already there, since the device file is present. There's no way to get around compiling the kernel. This isn't such a bad thing, as the kernel-install process is simple enough that a trained monkey can do it :). Assuming you've installed the kernel-source.2.0.30.deb, it's I heavily encourage you to use the kernel-package package. It is so easy, I've seen monkeys using it :-) read the doc under /usr/doc/kernel-package. The 11 steps below will be reduced to 3 steps or so. 1) determine your soundcard configuration (DMA, IRQ, addresses, etc.) often the default values are sufficient. Otherwise, a peek at windows configuration can be useful. 2) as root, a) cd /usr/src/linux b) make menuconfig (or make xconfig, if you're running x and tcl/tk) or make config, for the hardliners :-) c) select sound and follow the prompts at this point, take a look at the other stuff in your kernel; if you don't have scsi, disable scsi support, etc makes the kernel smaller and faster --- you'll probably also want to make sound a module, unless you use your sound card 24/7 If you have pnp sound card, you HAVE to install sound as a module (otherwise pnp cannot take effect before sound module initialize). 3) make dep 4) make clean 5) make zImage 6) make modules 7) make modules_install 8) mv /vmlinuz /mvlinuz.old (or some other backup name) 9) cp /usr/src/linux/arch/i386/boot/zImage /vmlinuz 10) modify /etc/lilo.conf to have a stanze for each kernel -- keep the old one around until you've run the new one a while (you might instead make the new kernel into a boot disk, so you don't have to play with lilo.conf yet -- to do this make zdisk with a disk in the drive) this steps are all one with the kernel package: Make your kernel, and you get a *.deb file, that you can install with dpkg -i name. 11) run lilo and then reboot and have fun :-) Marcus -- Rhubarb is no Egyptian god. Marcus Brinkmann [EMAIL PROTECTED] http://homepage.ruhr-uni-bochum.de/Marcus.Brinkmann/ -End of forwarded message- -- Rhubarb is no Egyptian god. Marcus Brinkmann [EMAIL PROTECTED] http://homepage.ruhr-uni-bochum.de/Marcus.Brinkmann/ -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Sound support in kernel recompile
Hi, Could you mail me a screen dump of the configuration attempt? Have you looked at and added the patch found in the file /usr/doc/kernel-package.Problems.gz? My SB AWE32 config options are given below, and the sound card works fine, I just can't get the wave synthesis to work. manoj # # Sound # CONFIG_SOUND=y # CONFIG_PAS is not set CONFIG_SB=y # CONFIG_ADLIB is not set # CONFIG_GUS is not set # CONFIG_MPU401 is not set # CONFIG_PSS is not set # CONFIG_GUS16 is not set # CONFIG_GUSMAX is not set # CONFIG_MSS is not set # CONFIG_SSCAPE is not set # CONFIG_TRIX is not set # CONFIG_MAD16 is not set # CONFIG_CS4232 is not set # CONFIG_MAUI is not set CONFIG_YM3812=y SBC_BASE=220 SBC_IRQ=5 SBC_DMA=1 SB_DMA2=5 SB_MPU_BASE=330 # # MPU401 IRQ is only required with Jazz16, SM Wave and ESS1688. # # # Enter -1 to the following question if you have something else such as SB16/32. # SB_MPU_IRQ=-1 CONFIG_LOWLEVEL_SOUND=y # CONFIG_ACI_MIXER is not set CONFIG_AWE32_SYNTH=y # CONFIG_AEDSP16 is not set -- It is best to avoid volcanos whenever possible. Manoj Srivastava url:mailto:[EMAIL PROTECTED] Mobile, Alabama USAurl:http://www.datasync.com/%7Esrivasta/
Sound support in kernel recompile
Hi, Following the identification of a subtle bug in kernel-package which prefres custom.1.0 instead of custom-1.0 in the command syntax I managed to recompile my kernel succesfully without sound. When I set the sound card option to yes in the .config file my recompile breaks down giving errors about not being able to find some sound drivers. I only want the generic sound card support since when I put the SoundBlaster option to yes I get some requests for hardware details which I don't know how to fill If I leave the default values I get some sort of infinite loop . Is it possible to recompile a kernel with only the generic sound support on ? If it is what am I doing wrong ? If it isn't and I must set the hardware options can I get those values from a proc file or through some command since my documentation is not good enough ? Any help will be greatly appreciated. This is one of the two reasons I recompiled my kernel anyway. Thanks George --- George Kapetanios Churchill College Cambridge, CB3 0DS U.K.E-Mail: [EMAIL PROTECTED] ---
Re: Sound support in kernel recompile
George, Join the club! I have a SB pro on a machine and ran into the same problem. I am compiling a list of kernels now, but will get it fixed later on. On Sun, 6 Apr 1997, G. Kapetanios wrote: Hi, Following the identification of a subtle bug in kernel-package which prefres custom.1.0 instead of custom-1.0 in the command syntax I managed to recompile my kernel succesfully without sound. When I set the sound card option to yes in the .config file my recompile breaks down giving errors about not being able to find some sound drivers. I only want the generic sound card support since when I put the SoundBlaster option to yes I get some requests for hardware details which I don't know how to fill If I leave the default values I get some sort of infinite loop . Is it possible to recompile a kernel with only the generic sound support on ? If it is what am I doing wrong ? If it isn't and I must set the hardware options can I get those values from a proc file or through some command since my documentation is not good enough ? Any help will be greatly appreciated. This is one of the two reasons I recompiled my kernel anyway. Thanks George --- George Kapetanios Churchill College Cambridge, CB3 0DS U.K.E-Mail: [EMAIL PROTECTED] --- Paul Wade - Greenbush Technologies Corporation http://www.greenbush.com/cds.html Linux CD's sent worldwide