Re: Xorg will not start no matter what I do
Ken Heard([EMAIL PROTECTED]) is reported to have said: I recently installed Etch RC1 in a P3 box. The smoke test succeeded up to the point where Xorg was to be loaded -- it would not load. I ran dpkg-reconfigure xserver-xorg several times. Each the time process was able to configure automatically the keyboard, mouse, video card and monitor settings without my intervention. I checked the log file and xorg.conf but could find nothing amiss. Can anyone suggest what to do now? Ken To troubleshoot your problem more information would help. What is the output of dpkg -l xserver-xorg* |grep ^i Wayne -- Any programming language is at its best before it is implemented and used. ___ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Re: Xorg will not start no matter what I do
On Fri, Jan 19, 2007 at 11:12:55PM -0500, Ken Heard wrote: (II) LoadModule: kbd (WW) Warning, couldn't open module kbd (II) UnloadModule: kbd (EE) Failed to load module kbd (module does not exist, 0) (II) LoadModule: mouse (WW) Warning, couldn't open module mouse (II) UnloadModule: mouse (EE) Failed to load module mouse (module does not exist, 0) (EE) No devices detected. Fatal server error: no screens found This happened to me when I used the DAILY SNAPSHOT to install Debian a month ago. And this is what fixed it: Douglas Allan Tutty wrote: What packages do you have installed related to xorg. You will need at least xserver-xorg-input-kbd and xserver-xorg-input-mouse, xserver-xorg depends on some or all of xserver-xorg-input-* These are needed to provide the modules that your log shows do not exist. I also needed to install my xserver-xorg-video-driver package. Angelo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Xorg will not start no matter what I do
I recently installed Etch RC1 in a P3 box. The smoke test succeeded up to the point where Xorg was to be loaded -- it would not load. I ran dpkg-reconfigure xserver-xorg several times. Each the time process was able to configure automatically the keyboard, mouse, video card and monitor settings without my intervention. I checked the log file and xorg.conf but could find nothing amiss. Can anyone suggest what to do now? Here is the xorg installation log file. X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux BDS 2.6.18-3-686 #1 SMP Mon Dec 4 16:41:14 UTC 2006 i686 Build Date: 30 December 2006 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Sun Jan 14 04:53:24 2007 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Philips 150P (**) | |--Device Matrox Graphics, Inc. MGA G200 AGP (**) |--Input Device Generic Keyboard (**) |--Input Device Configured Mouse (WW) The directory /usr/X11R6/lib/X11/fonts/misc does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/Type1 does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi does not exist. Entry deleted from font path. (WW) The directory /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi (==) RgbPath set to /etc/X11/rgb (==) ModulePath set to /usr/lib/xorg/modules (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor=X.Org Foundation compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/lib/xorg/modules/libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3091 card , rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b091 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:09:0: chip 10ec,8139 card 1186,1300 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:11:0: chip 1106,3074 card 1106, rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 18 class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 18 class 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 18 class 0c,03,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card , rev 10 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 102b,0521 card 102b,ff03 rev 01 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II)
Re: Xorg will not start no matter what I do
Ken Heard wrote: I recently installed Etch RC1 in a P3 box. The smoke test succeeded up to the point where Xorg was to be loaded -- it would not load. I ran dpkg-reconfigure xserver-xorg several times. Each the time process was able to configure automatically the keyboard, mouse, video card and monitor settings without my intervention. I checked the log file and xorg.conf but could find nothing amiss. Can anyone suggest what to do now? Here is the xorg installation log file. snip (II) LoadModule: kbd (WW) Warning, couldn't open module kbd (II) UnloadModule: kbd (EE) Failed to load module kbd (module does not exist, 0) (II) LoadModule: mouse (WW) Warning, couldn't open module mouse (II) UnloadModule: mouse (EE) Failed to load module mouse (module does not exist, 0) (II) APM: driver for the Alliance chipsets: AP6422, AT24, AT3D (II) Primary Device is: PCI 01:00:0 (EE) No devices detected. This is where I'd start; I'd see if I could fix the kbd and mouse issue. Google returned a hit at http://forums.debian.net/viewtopic.php?t=8510sid=2796a3ae02b988a9a8ef71fee66b3906 which suggested (between the lines) modprobe mouse for the mouse problem. Another hit I found indicated a problem with udev (not being installed). Try cat /dev/mousedevice, where mousedevice is the device file for your mouse connection, such as /dev/input/mice, etc and then move your mouse around. You should see a lot of ASCII garbage show up on the screen. (Ctrl-C to stop the cat.) This will verify if your mouse is being seen by the system. Also, does lspci report your video card to be on 1:0:0? -- Kent West Westing Peacefully http://kentwest.blogspot.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Xorg will not start no matter what I do
On 1/19/07, Ken Heard [EMAIL PROTECTED] wrote: I recently installed Etch RC1 in a P3 box. The smoke test succeeded up to the point where Xorg was to be loaded -- it would not load. I ran dpkg-reconfigure xserver-xorg several times. Each the time process was able to configure automatically the keyboard, mouse, video card and monitor settings without my intervention. I checked the log file and xorg.conf but could find nothing amiss. Can anyone suggest what to do now? Here is the xorg installation log file. ... (EE) Failed to load module kbd (module does not exist, 0) (II) LoadModule: mouse (WW) Warning, couldn't open module mouse (II) UnloadModule: mouse (EE) Failed to load module mouse (module does not exist, 0) (II) APM: driver for the Alliance chipsets: AP6422, AT24, AT3D (II) Primary Device is: PCI 01:00:0 (EE) No devices detected. Fatal server error: no screens found Well, you can see there are three errors right there. If you look in the config file, you see... Here is the xorg.conf file: ... Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/psaux Option Protocol PS/2 EndSection Notice the kdb and mouse drivers. On my system, the config file has keyboard instead of kbd, and I don't know about mouse, but I use evdev (lets you use more buttons, etc). Try switching to keyboard and evdev and see if that helps. (Should probably comment out the Protocol PS/2 line too.) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Xorg will not start no matter what I do
On Fri, Jan 19, 2007 at 11:12:55PM -0500, Ken Heard wrote: I recently installed Etch RC1 in a P3 box. The smoke test succeeded up to the point where Xorg was to be loaded -- it would not load. I ran dpkg-reconfigure xserver-xorg several times. Each the time process was able to configure automatically the keyboard, mouse, video card and monitor settings without my intervention. I checked the log file and xorg.conf but could find nothing amiss. Can anyone suggest what to do now? Here is the xorg installation log file. [snip] (II) LoadModule: kbd (WW) Warning, couldn't open module kbd (II) UnloadModule: kbd (EE) Failed to load module kbd (module does not exist, 0) (II) LoadModule: mouse (WW) Warning, couldn't open module mouse (II) UnloadModule: mouse (EE) Failed to load module mouse (module does not exist, 0) (EE) No devices detected. Fatal server error: no screens found What packages do you have installed related to xorg. You will need at least xserver-xorg-input-kbd and xserver-xorg-input-mouse, xserver-xorg depends on some or all of xserver-xorg-input-* These are needed to provide the modules that your log shows do not exist. Good luck. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
