[Bug 608540] Re: Eye of GNOME can display CR2 images but ignores them on next

[J . Pablo Fernández]

Why is it invalid?

-- 
Eye of GNOME can display CR2 images but ignores them on next
https://bugs.launchpad.net/bugs/608540
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to eog in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 542343] Re: gnome-panel will not autostart on lucid

[Alvils Berzins]

Hmm, I must admit this seems like some kind of a race condition to me. As Lucid 
in general starts up processes in parallel, then in a case where the system 
performance is not adequate, things might go south.
To test this, I have assembled two machines of notably low performance.
The first one is running on a Celeron 667 (sic) MHz CPU. Initially I put 256 
megs of RAM into it. It has a 20 GiB hard drive. Swapping as hell, it worked, 
apart from the fact that its i740 video card didn't support resolutions higher 
than 800x600 and so I was forced to generate an xorg.conf file and use the vesa 
driver. But that's another issue. Adding an additional 256 MiB helped to remedy 
the swapping issue, and, although pretty slow, it still worked.
The second one is the precise Intel Desktop Board with the i815 chipset 
mentioned in post #38. It has a Celeron 600 MHz CPU and 384 MiB of RAM 
installed. It uses the embedded video. Oh my - the first logon works as it 
should, as perhaps the configuration files are generated/cached, but the second 
one has no panel. Actually the panel launches, and pressing Ctrl+Alt+T to open 
the terminal and issuing `sudo killall gnome-panel` brings it back up. I tried 
to edit the /usr/share/applications/gnome-panel.desktop file and uncomment the 
X-gnome-autostart-phase=Panel line. After doing that, deleting ~/.g* 
directories and rebooting the panel came up again. And so after several 
restarts. But then I realized another issue - Nautilus does things the same 
way, so, although the panel is up, the desktop icons ain't. :(
Needless to say that after installing the updates the .desktop files were 
changed back to original, so just editing them is not enough, as any updates 
could put things back to normal.
I suspect the problem is Celeron 600's performance. I have a Celeron 766 MHz 
somewhere at home, so if I find it, I'll try to install that CPU on the faulty 
PC and see whether startup works normally then. It could be that the critical 
line for using a Celeron CPU is somewhere between 600 and 667 MHz. At least in 
the configuration I used.
Anyway, regardless of whether my tests will be successful, the very main issue 
that creates such behaviour is the one Lucid developers are proud of - parallel 
starting of processes. While giving an advantage on modern multi-core CPUs, 
this may not work on slower machines. I would be very glad in this regard if 
there was an option available during the installation (and maybe also 
afterwards) that would allow me to choose whether I want to start processes in 
parallel or in a sequential manner, so owners of older and slower machines 
(anyway, Celeron 600 is still enough for my Grandma to read e-mails) could also 
run Lucid. At the very least, update manager should not try to be smarter than 
me and change the .desktop files back to original. If I have edited them, I 
think I know what I'm doing and WHY I am doing that... :(

So, the bottom line of this is: I strongly suspect that this bug is
created by the parallel starting of processes. If a machine, for
whatever reason, does not have enough horsepower, a race condition could
appear. The obvious solution would be to allow the user to choose a
compatibility mode where those Gnome things would be started up in a
sequential manner.

I will inform you later (after about 10 hours) whether upgrading the CPU
to 766 MHz has solved the issue.

-- 
gnome-panel will not autostart on lucid
https://bugs.launchpad.net/bugs/542343
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 542343] Re: gnome-panel will not autostart on lucid

[Virgil Brummond]

Alvils Berzins, perhaps try setting the swappiness parameter to
vm.swappiness=100 on machines with low ram. I find this makes things
much smoother.

To do so:

1. Open this text file as root: /etc/sysctl.conf
2. Append this to the end: vm.swappiness=100
3. Reboot.

-- 
gnome-panel will not autostart on lucid
https://bugs.launchpad.net/bugs/542343
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 542343] Re: gnome-panel will not autostart on lucid

[Alvils Berzins]

Hi Virgil,

Thanks for the tip. :) Actually, this is a good idea.
Yet, this is not the case. As I wrote, a Celeron 667 with 256 MiB of RAM swaps, 
but works. A Celeron 600 with 384 MiB does not.

-- 
gnome-panel will not autostart on lucid
https://bugs.launchpad.net/bugs/542343
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 542343] Re: gnome-panel will not autostart on lucid

[William Grant]

Virgil, Alvils: Whatever you are experiencing, it is not this bug.
Please file another.

-- 
gnome-panel will not autostart on lucid
https://bugs.launchpad.net/bugs/542343
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 248705] Re: Evolution Exchange does not authenticate to Exchange servers with a relative path in the form action, e.g. owaauth.dll

[Martin Pitt]

Any testers? I'll remove this from -proposed soon if we don't get any
feedback. Thank you!

-- 
Evolution Exchange does not authenticate to Exchange servers with a relative 
path in the form action, e.g. owaauth.dll
https://bugs.launchpad.net/bugs/248705
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution-data-server in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 359658] Re: evolution crashed with SIGSEGV in strcmp()

[Martin Pitt]

This update has been in jaunty-proposed for half a year or longer,
without any testing feedback. I removed the jaunty-proposed package
again.

** Changed in: evolution-indicator (Ubuntu Jaunty)
   Status: Fix Committed = Won't Fix

-- 
evolution crashed with SIGSEGV in strcmp()
https://bugs.launchpad.net/bugs/359658
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a subscriber of a duplicate bug (381504).

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 270976] Re: [SRU] gst-plugins-bad0.10 needs rebuilding with mjpegtools to enable burning video with Brasero

[Martin Pitt]

This update has been in jaunty-proposed for half a year or longer,
without any testing feedback. I removed the jaunty-proposed package
again.

** Changed in: gst-plugins-bad-multiverse0.10 (Ubuntu Jaunty)
   Status: Fix Committed = Won't Fix

-- 
[SRU] gst-plugins-bad0.10 needs rebuilding with mjpegtools to enable burning 
video with Brasero
https://bugs.launchpad.net/bugs/270976
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 608689] Re: yelp fails to initialise gecko

[mario]

Todays update (xulrunner-1.9.2_1.9.2.8+build1+nobinonly-
0ubuntu0.10.04.1_amd64.deb) didn't help.

-- 
yelp fails to initialise gecko
https://bugs.launchpad.net/bugs/608689
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to yelp in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 316017] Re: gthumb[15566]: segfault at 5126c60f eip b7f7bfe6 esp bf9bab08 error 4

[Martin Pitt]

I removed the hardy-proposed version again.

** Changed in: gthumb (Ubuntu Hardy)
   Status: Fix Committed = Confirmed

** Tags removed: verification-failed

-- 
gthumb[15566]: segfault at 5126c60f eip b7f7bfe6 esp bf9bab08 error 4
https://bugs.launchpad.net/bugs/316017
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gthumb in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 359658] Re: evolution crashed with SIGSEGV in strcmp()

[Oded Arbel]

I'm sorry, but I didn't encounter this problem again on my system.

My personal opinion as a developer is that changing bad code for good
code is a good idea, and even if the original problem is not
reproduceable and even if the patch is not being tested, that fix still
makes sense and should go in - preventing SIGSEGV should be no. 1
priority of developers.

Here's the GNOME official documentation of g_str_equal() (the call being 
replaced by the patch):
---8---
Note that this function is primarily meant as a hash table comparison function. 
For a general-purpose, NULL-safe string comparison function, see g_strcmp0(). 
---8---

Which as I read it means: don't ever use g_str_equal() as a general
string comparison method. IMHO no testing feedback should be required to
apply this patch, because it makes sense the original code is bad.

-- 
evolution crashed with SIGSEGV in strcmp()
https://bugs.launchpad.net/bugs/359658
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a subscriber of a duplicate bug.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 248355] Re: Evince doesn't anti-alias graphics

[m0sia]

The same problem with Lucid up-to-date. Sebastien Bacher, what
information do you need to consider that the issue is not fixed yet?

-- 
Evince doesn't anti-alias graphics
https://bugs.launchpad.net/bugs/248355
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 293832] Re: printer prints page at wrong position, page cut

[Martin Pitt]

Anyone who can test the karmic-proposed package? I'll remove it soon if
there is no testing feedback. Thank you!

-- 
printer prints page at wrong position, page cut
https://bugs.launchpad.net/bugs/293832
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to poppler in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 569273] Re: memory leak in gnome-power-manager

[Martin Pitt]

I removed the lucid-proposed package again. This wasn't fixed in
maverick yet, and the lucid update reportedly does not fix the problem.

** Changed in: indicator-application
   Status: Fix Released = Confirmed

** Tags removed: verification-failed

-- 
memory leak in gnome-power-manager
https://bugs.launchpad.net/bugs/569273
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-power-manager in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 572985] Re: backup settings option uses unhelpful yes/no dialog

[Andrew]

I have sent a patch upstream which does the following:-


I have changed the backup dialog text from this:
---
Evolution backup can start only when Evolution is not running. Please make sure
that you save and close all your unsaved windows before proceeding.  If you
want Evolution to restart automatically after backup, please enable the toggle
button.
---

To this:
---
To backup your data and settings, you must first close Evolution. Please make
sure that you save any unsaved data before proceeding.
---

I removed the unnecessary explanation about the togglebutton, it is not needed,
it can explain itself. I also removed the bit about closing unsaved windows,
this isn't what we want to tell the user, we want the user to saved any unsaved
data, not just delete it. I also rephrased the first bit to make it orientated
to what the user is doing, not speaking about the technical side of how it will
work.

I also changed the button text from:
--
No | Yes
--

To:
--
Cancel | Close and Backup Evolution
--

Now there is no confusion over what will happen.


I have changed the restore dialog text from this:
---
This will delete all your current Evolution data and settings and restore them
from your backup. Evolution restore can start only when Evolution is not
running. Please make sure that you close all your unsaved windows before you
proceed. If you want Evolution to restart automatically restart after restore,
please enable the toggle button.
---


To this:
---
To restore your data and settings, you must first close Evolution. Please make
sure that you save any unsaved data before proceeding. This will delete all
your current Evolution data and settings and restore them from your backup.
---

this is the same text as in the backup dialog, but with the added sentence of
warning the user of what will happen. Likewise the button text has been changed
from:
--
No | Yes
--

To:
--
Cancel | Close and Restore Evolution
--

** Changed in: hundredpapercuts
 Assignee: (unassigned) = Andrew (and471)

** Changed in: evolution (Ubuntu)
 Assignee: (unassigned) = Andrew (and471)

-- 
backup settings option uses unhelpful yes/no dialog
https://bugs.launchpad.net/bugs/572985
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 604532] Re: X11 session suddenly killed - because of key stroke combination?

[Lars]

Next time this happens I'll report the requested info.

Lars

-- 
X11 session suddenly killed - because of key stroke combination?
https://bugs.launchpad.net/bugs/604532
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-session in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 572985] Re: backup settings option uses unhelpful yes/no dialog

[Andrew]

** Changed in: hundredpapercuts
   Status: Triaged = In Progress

-- 
backup settings option uses unhelpful yes/no dialog
https://bugs.launchpad.net/bugs/572985
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 608000] Re: Clicking Enabled column header in Rhythmbox's plugins dialog enables/disables all plugins intead of sorting them

[Alexander Usyskin]

According to the: http://projects.gnome.org/rhythmbox/
you can send a mail to the rhythmbox-devel mailing list 
(rhythmbox-de...@gnome.org) and ask them about this issue.

-- 
Clicking Enabled column header in Rhythmbox's plugins dialog enables/disables 
all plugins intead of sorting them
https://bugs.launchpad.net/bugs/608000
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to rhythmbox in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 314859] Re: Certificate manager can't delete certificate exception.

[Bug Watch Updater]

** Changed in: epiphany-browser
   Status: Unknown = Confirmed

-- 
Certificate manager can't delete certificate exception.
https://bugs.launchpad.net/bugs/314859
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to epiphany-browser in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 222256] Re: small fonts in epiphany

[Bug Watch Updater]

** Changed in: epiphany-browser
   Status: Unknown = New

-- 
small fonts in epiphany
https://bugs.launchpad.net/bugs/56
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to epiphany-browser in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610599] Re: Smaller default font's

[Vish]

*** This bug is a duplicate of bug 310353 ***
https://bugs.launchpad.net/bugs/310353

Thank you for taking the time to report this bug and helping to make
Ubuntu better. This particular bug has already been reported and is a
duplicate of bug 310353, so it is being marked as such. Please look at
the other bug report to see if there is any missing information that you
can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report.  Please continue to report any other bugs you may
find.

** Also affects: gnome-control-center (Ubuntu)
   Importance: Undecided
   Status: New

** This bug has been marked a duplicate of bug 310353
   Default font size too large if using native DPI

-- 
Smaller default font's
https://bugs.launchpad.net/bugs/610599
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 558841] Re: bluetooth devices menu item not working in bluetooth indicator

[Sebastien Bacher]

The current version stills displays some warning after turning bt off and on 
and the visible item is not listed
Karl could you try to figure what's going on there?

** Changed in: indicator-application (Ubuntu)
   Status: Fix Released = Triaged

** Changed in: indicator-application (Ubuntu)
 Assignee: (unassigned) = Karl Lattimer (karl-qdh)

-- 
bluetooth devices menu item not working in bluetooth indicator
https://bugs.launchpad.net/bugs/558841
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 520118] Re: thunar select freezes after using mouse to select folders (detailed view mode)

[Martin Pitt]

Can anybody please test pcmanfm in lucid-proposed and give feedback
whether the update works and fixes this? Thank you!

-- 
thunar select freezes after using mouse to select folders (detailed view mode)
https://bugs.launchpad.net/bugs/520118
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610422] Re: Nautilus has 100% CPU Usage since Kernel Upgrade in Lucid

[Jan]

Yes this also happens if I boot the previous kernel. Nautilus has a CPU
Usage of 100% but after 10 minutes or so it hasn't.

-- 
Nautilus has 100% CPU Usage since Kernel Upgrade in Lucid
https://bugs.launchpad.net/bugs/610422
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 515139] Re: Icons from gnome panel are missing at random on startup

[turbolad]

I'm having these same problems on Ubuntu 10.04 64-bit.  Sometimes when
you boot up, icons go missing or don't fit properly, other times
everything is there.

Sometimes the power button disappears and I have to go into a terminal
and type sudo poweroff just to switch off my computer.

Until we wait for a bugfix from the updater, is there a way of going
into the terminal and re-loading the Gnome Panel so the icons re-appear
properly?

THIS IS DEFINITELY A BUG and it's been around since I first started
using Ubuntu just under a year ago.  This problem still happens quite
often.

-- 
Icons from gnome panel are missing at random on startup
https://bugs.launchpad.net/bugs/515139
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 175233] Re: Evolution hangs with Formatting Message after several hours

[SkyMan]

this bugs affects me when I want to read message with photo. But
sometimes it is crashes or hungs on messages without any photo but with
attachment.

So I think bug activates while Evolution is processing attachments

-- 
Evolution hangs with Formatting Message after several hours
https://bugs.launchpad.net/bugs/175233
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610802] [NEW] 'Mirror Screens' often seen on projectors during presentations.

[Michael Forrest]

Public bug reported:

Binary package hint: gnome-control-center

Can I suggest that the display labels are hidden when the Monitors
window is not focused? This would help business people when they give
presentations, as they would have to remember to go back and close this
window after they've got the projector working, and it would still be
around once they'd finished their slideshow so they could make sure
their laptop display is still how they like it.

** Affects: gnome-control-center
 Importance: Unknown
 Status: Unknown

** Affects: hundredpapercuts
 Importance: Undecided
 Status: New

** Affects: gnome-control-center (Ubuntu)
 Importance: Undecided
 Status: New

-- 
 'Mirror Screens' often seen on projectors during presentations.
https://bugs.launchpad.net/bugs/610802
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610802] Re: 'Mirror Screens' often seen on projectors during presentations.

[Michael Forrest]

** Attachment added: What I mean by the 'display label' - here it says 'Mirror 
Screens' but it might say anything.
   http://launchpadlibrarian.net/52630312/slideshow.png

** Bug watch added: GNOME Bug Tracker #625476
   https://bugzilla.gnome.org/show_bug.cgi?id=625476

** Also affects: gnome-control-center via
   https://bugzilla.gnome.org/show_bug.cgi?id=625476
   Importance: Unknown
   Status: Unknown

-- 
 'Mirror Screens' often seen on projectors during presentations.
https://bugs.launchpad.net/bugs/610802
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610802] Re: 'Mirror Screens' often seen on projectors during presentations.

[Michael Forrest]

** Also affects: hundredpapercuts
   Importance: Undecided
   Status: New

-- 
 'Mirror Screens' often seen on projectors during presentations.
https://bugs.launchpad.net/bugs/610802
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 604635] Re: Have default settings be energy star 5.0 compliant

[Chris Coulson]

I wrote an extension for Firefox at the sprint last week, which inhibits
suspend when downloading files. It seems to work pretty well now, and
you can download it from http://edge.launchpad.net/moz-gnome-
pm/trunk/0.1/+download/moz-gnome-pm-0.1.xpi

** Changed in: firefox (Ubuntu)
 Assignee: (unassigned) = Chris Coulson (chrisccoulson)

-- 
Have default settings be energy star 5.0 compliant
https://bugs.launchpad.net/bugs/604635
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to rhythmbox in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 175233] Re: Evolution hangs with Formatting Message after several hours

[Aditya]

When I start evolution, it sometimes stops responding and the status bar
shows the message Formatting message . I have to end evolution process
from system monitor to get rid of this. It happens both with my POP
Yahoo account and IMAP gmail account. Please note that this happens only
once in  2-3 days. Please contact me if you need further info.

-- 
Evolution hangs with Formatting Message after several hours
https://bugs.launchpad.net/bugs/175233
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610802] Re: 'Mirror Screens' often seen on projectors during presentations.

[Ivanka Majic]

As someone who gives presentations very regularly, I can confirm this is
a major annoyance and somewhat impedes the 'smoothness' of the start of
the presentation.

+1 on Michael's suggestion.

** Changed in: hundredpapercuts
   Status: New = Confirmed

-- 
 'Mirror Screens' often seen on projectors during presentations.
https://bugs.launchpad.net/bugs/610802
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 108623] Re: totem isn't buffering correctly

[tschinke]

I just upgraded an older ubuntu version to the current 10.04 and there I
can play the *.qtl files properly. You can pause the playback and it
will preload the movie just like the typical youtube flashplayer. It
works for me now as expected.

-- 
totem isn't buffering correctly
https://bugs.launchpad.net/bugs/108623
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610818] [NEW] Brasero doesnt opens

[Kangarooo]

Public bug reported:

Binary package hint: brasero

if i use left click on iso and open with brasero then i can only write that one 
image
but cant open brasero anyway..
heres output

kng-samariesu-g...@kng-samariesu-grup-desktop:~$ ubuntu-bug brasero ** Message: 
pygobject_register_sinkfunc is deprecated (GtkWindow)
** Message: pygobject_register_sinkfunc is deprecated (GtkInvisible)
** Message: pygobject_register_sinkfunc is deprecated (GtkObject)
Gtk-Message: (for origin information, set GTK_DEBUG): failed to retrieve 
property `GtkTreeView::odd-row-color' of type `GdkColor' from rc file value 
((GString*) 0x9b2acb0) of type `GString'
kng-samariesu-g...@kng-samariesu-grup-desktop:~$ brasero 

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data:
assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(brasero:2702): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(brasero:2702): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion 
`G_TYPE_CHECK_INSTANCE (instance)' failed
kng-samariesu-g...@kng-samariesu-grup-desktop:~$

ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: brasero 2.30.2-1ubuntu2
ProcVersionSignature: Ubuntu 2.6.35-11.16-generic 2.6.35-rc5
Uname: Linux 2.6.35-11-generic i686
Architecture: i386
Date: Wed Jul 28 13:57:57 2010
EcryptfsInUse: Yes
InstallationMedia: Xubuntu 10.10 Maverick Meerkat - Alpha i386 (20100701)
ProcEnviron:
 LANG=lv_LV.utf8
 SHELL=/bin/bash
SourcePackage: brasero

** Affects: brasero (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 maverick

-- 
Brasero doesnt opens
https://bugs.launchpad.net/bugs/610818
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to brasero in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610818] Re: Brasero doesnt opens

[Kangarooo]

** Attachment added: Dependencies.txt
   http://launchpadlibrarian.net/52631726/Dependencies.txt

-- 
Brasero doesnt opens
https://bugs.launchpad.net/bugs/610818
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to brasero in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610802] Re: 'Mirror Screens' often seen on projectors during presentations.

[Bug Watch Updater]

** Changed in: gnome-control-center
   Status: Unknown = New

-- 
 'Mirror Screens' often seen on projectors during presentations.
https://bugs.launchpad.net/bugs/610802
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 608689] Re: yelp fails to initialise gecko

[Tan Kah Ping]

A recent update seems to have fixed this for me

-- 
yelp fails to initialise gecko
https://bugs.launchpad.net/bugs/608689
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to yelp in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610802] Re: 'Mirror Screens' often seen on projectors during presentations.

[Vish]

** Changed in: gnome-control-center (Ubuntu)
   Importance: Undecided = Wishlist

** Changed in: gnome-control-center (Ubuntu)
   Status: New = Triaged

** Changed in: hundredpapercuts
   Importance: Undecided = Low

** Changed in: hundredpapercuts
   Status: Confirmed = Triaged

-- 
 'Mirror Screens' often seen on projectors during presentations.
https://bugs.launchpad.net/bugs/610802
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 220656] Re: zenity --progress cancel button doesn't return a value

[Bug Watch Updater]

** Changed in: zenity
   Status: Unknown = Invalid

-- 
zenity --progress cancel button doesn't return a value
https://bugs.launchpad.net/bugs/220656
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 574876] Re: swell-foop segfaults with error 4 in libclutter-glx-1.0.so.0.200.4

[teknopartz]

In case anyone is interested:

After I replaced 'swell-foop' with 'same-gnome' things look good with
the game until it comes to saving high-scores! In order to make scores
work I had to do something like this:


touch /var/games/same-gnome.Small.scores
touch /var/games/same-gnome.Medium.scores
touch /var/games/same-gnome.Large.scores
chmod 664 /var/games/same-gnome.*
chown root:games /var/games/same-gnome.*


I think my mum will be happy about the game working properly now (hopefully!)

Jeremy

-- 
swell-foop segfaults with error 4 in libclutter-glx-1.0.so.0.200.4
https://bugs.launchpad.net/bugs/574876
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-games in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 520118] Re: thunar select freezes after using mouse to select folders (detailed view mode)

[Antonio J. de Oliveira]

Hi Martin

pcmanfm does not start at all. It just exits gracefully when run from
bash.

Cheers

-- 
thunar select freezes after using mouse to select folders (detailed view mode)
https://bugs.launchpad.net/bugs/520118
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 95853] Re: Add an option to get a confirmation dialog before deleting files in Nautilus

[Alexander Obersht]

I don't understand the ongoing holy war at all. Why can't the
confirmation dialog be optional. Those who want it, will turn it on, and
those who don't want it will turn it off. Problem solved and everyone's
happy.

-- 
Add an option to get a confirmation dialog before deleting files in Nautilus
https://bugs.launchpad.net/bugs/95853
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 398077] Re: No easy way to restore the session start programs to the default set

[rykel]

Hi,

I am using Ubuntu Lucid, and I would like to report that the System --
Preferences -- Startup Applications program is buggy when trying to
activate and then DE-activate the Automatically remember running
applications when logging out option.

I activated the option, logged out, logged in and yes, the running
applications were reloaded.

But when I deselect the Automatically... function and logged out then
logged in, the system was STILL trying to reload the previous set of
running applications.

Hope somebody can enlighten me on this problem. Thank you so much!

-- 
No easy way to restore the session start programs to the default set
https://bugs.launchpad.net/bugs/398077
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 474233] Re: brasero does not eject disk after burning

[Igor Wojnicki]

Is it going to be fixed for Karmic?

-- 
brasero does not eject disk after burning
https://bugs.launchpad.net/bugs/474233
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to brasero in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 575500] Re: refuses to open files with incorrect encoding

[arkmundi]

Got this error again today.  The file I'm editing has 100% been created
with gedit, so its surprising that I can edit, save, and then not be
able to open the file.

-- 
refuses to open files with incorrect encoding
https://bugs.launchpad.net/bugs/575500
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gedit in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610847] [NEW] gnome-screenshot allows multiple instances

[John Baptist]

Public bug reported:

Binary package hint: gnome-utils

Multiple instances of gnome-screenshot can be active at a time. This is
problematic if the user accidentally holds down the PrintScr key for a
moment, as the resulting numerous instances of the program seriously
degrade system performance and are annoying to terminate.

Instead, if PrintScr is pressed when gnome-screenshot is already active,
either (a) that instance should be moved to the foreground or (b)
nothing should happen.

** Affects: gnome-utils (Ubuntu)
 Importance: Undecided
 Status: New

-- 
gnome-screenshot allows multiple instances
https://bugs.launchpad.net/bugs/610847
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-utils in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 608833] Re: Gnome Panel hangs and renders touchpad and mouse unusable

[JimP]

@jpangamarca, The first attempt to get a backtrace did not work well.
Gnome-panel has a very long list of dependencies though, and I only
installed the debug symbols for gnome-panel itself. The effect that I
got was that when the problem occurred the gnome debugger seemed to make
the problem worse as none of my previously documented tricks for
regaining control of the X session would work. I had to use the run
application dialog to run killall gnome-panel. There was nothing in the
backtrace after the initial startup messages (one for each dependency!)
and it noting when I terminated it. The problem occurred when I was
using an xpra session to an instance of thunderbird running under
another user account on the same machine.  There were some xsession
messages, which are attached.

** Attachment added: xsession-errors-2
   http://launchpadlibrarian.net/52636058/xsession-errors-2

-- 
Gnome Panel hangs and renders touchpad and mouse unusable
https://bugs.launchpad.net/bugs/608833
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 608833] Re: Gnome Panel hangs and renders touchpad and mouse unusable

[JimP]

Can anyone suggest a smaller set of debug packages to install than the
whole list of gnome-panel dependencies which might help get a meaningful
backtrace?

-- 
Gnome Panel hangs and renders touchpad and mouse unusable
https://bugs.launchpad.net/bugs/608833
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 316904] Re: Cancel button doesn't work

[Bug Watch Updater]

** Changed in: zenity
   Status: New = Invalid

-- 
Cancel button doesn't work
https://bugs.launchpad.net/bugs/316904
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 350772] Re: playing MMS / .ASX with totem needs manual install of codec package

[.cobnet]

Bug #543157 (https://bugs.launchpad.net/ubuntu/+source/gnome-codec-
install/+bug/543157) seems related. The solution provided there by
'Sergey K' (post 5) solved my problem (using Ubuntu 10.04).

-- 
playing MMS / .ASX with totem needs manual install of codec package
https://bugs.launchpad.net/bugs/350772
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 609843] Re: memory leaks

[haqt]

I can confirm and replicate the bug.

ran 2 tests:
1. search results returned only a dozen or so files
2. search results returned a few thousand files

for 1st test:

- No issues running search utility. Only a few files were returned in
search results

top output after search completed:

top - 23:39:45 up  3:12,  2 users,  load average: 0.28, 0.20, 0.29
Tasks: 203 total,   1 running, 202 sleeping,   0 stopped,   0 zombie
Cpu(s):  5.2%us,  1.8%sy,  0.0%ni, 93.1%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   4056520k total,  1150904k used,  2905616k free,14872k buffers
Swap:  2931852k total,   341988k used,  2589864k free,   211564k cached

  PID USER  PR  NI  VIRT  RES  SHR S %CPU %MEMTIME+  COMMAND

  
 2757 haqt  20   0 1053m 351m 346m S0  8.9   3:12.99 
/usr/lib/virtualbox/VirtualBox --comment lucid-mini-amd64 --startvm 
41b4bd1f-1245-42a1-85ed-d527079776fd --no-startvm-errormsgbox   
 
 2464 haqt  20   0  801m 153m  15m S   12  3.9  12:25.75 
/usr/lib/firefox-3.6.8/firefox-bin  
 
 1018 root  20   0  169m  45m 5380 S   10  1.1  10:31.68 /usr/bin/X :0 -nr 
-verbose -auth /var/run/gdm/auth-for-gdm-HiXAz4/database -nolisten tcp vt7  
   
 1562 haqt  20   0  706m  32m  15m S0  0.8   0:23.70 nautilus   

  
 3538 haqt  20   0  372m  28m  11m S0  0.7   0:09.28 gnome-search-tool


No issues copying files to a temp folder.


for 2nd test:

- Again, no issues running search utility. This time more than 6000
files were returned in search results.


- When I selected all the files and dragged (copied) them to a folder, cpu load 
spiked momentarily (due to disk activity). During this period, mouse becomes 
slightly unresponsive too. But eventually the disk activity subsides.
In top I could see that the search tool has consumed a large portion of 
available memory, but nothing has copied to folder. No copy indicator with 
completion bar appear to indicate that a copy is in progress.

here is top output while I was waiting for files to copy across.

top - 23:50:42 up  3:23,  2 users,  load average: 0.85, 0.50, 0.35
Tasks: 203 total,   1 running, 202 sleeping,   0 stopped,   0 zombie
Cpu(s):  0.9%us,  0.8%sy,  0.2%ni, 97.5%id,  0.1%wa,  0.5%hi,  0.0%si,  0.0%st
Mem:   4056520k total,  4006020k used,50500k free,13548k buffers
Swap:  2931852k total,   336692k used,  2595160k free,   295340k cached

  PID USER  PR  NI  VIRT  RES  SHR S %CPU %MEMTIME+  COMMAND

  
 3538 haqt  20   0 3058m 2.7g  11m S0 68.5   0:52.11 gnome-search-tool 
 2757 haqt  20   0 1053m 351m 346m S3  8.9   3:16.11 
/usr/lib/virtualbox/VirtualBox --comment lucid-mini-amd64 --startvm 
41b4bd1f-1245-42a1-85ed-d527079776fd --no-startvm-errormsgbox   
 
 2464 haqt  20   0  801m 153m  15m S0  3.9  12:36.52 
/usr/lib/firefox-3.6.8/firefox-bin  
 
 1562 haqt  20   0  722m  52m  16m S0  1.3   0:49.37 nautilus 


- The files that were copied could not have been more than 1gb in total. So 
there really should have been no issues copying the files to a folder

While I was waiting for the copy indicator to appear, i can use the
search tool to run another search. I was able to run a few more search
queries before an error message appear saying there was insufficient
memory left to run search query.

Eventually, I ran out of patience after 15min or so, and closed the
search tool.

The search tool closed normally, and all the memory it previously
consumed was freed.


** Changed in: gnome-utils (Ubuntu)
   Status: New = Confirmed

-- 
memory leaks
https://bugs.launchpad.net/bugs/609843
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-utils in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 609843] Re: memory leaks

[haqt]

ERE,

I don't think this is a memory leak.

Although gnome-search-tool does consume an unusually large amount of
memory while the program is running, they seem to be freed once the
program is terminated.

I think a more appropriate title to this bug would be: 'gnome-search-
tool consumes alot of memory while attempting to copy files from search
results; cannot copy files from large search results'

or something like that

-- 
memory leaks
https://bugs.launchpad.net/bugs/609843
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-utils in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 520118] Re: thunar select freezes after using mouse to select folders (detailed view mode)

[Antonio J. de Oliveira]

ok, my mistake, oops...had it installed on another machine running ssh
without noticing it ;-). pcmanfm works nomally, the flaw seems
corrected.

-- 
thunar select freezes after using mouse to select folders (detailed view mode)
https://bugs.launchpad.net/bugs/520118
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

Re: [Bug 520118] Re: thunar select freezes after using mouse to select folders (detailed view mode)

[Martin Pitt]

Antonio J. de Oliveira [2010-07-28 11:51 -]:
 pcmanfm does not start at all. It just exits gracefully when run from
 bash.

Is that expected behaviour? Does it do the same with the lucid final
version?

Martin
-- 
Martin Pitt| http://www.piware.de
Ubuntu Developer (www.ubuntu.com)  | Debian Developer  (www.debian.org)

-- 
thunar select freezes after using mouse to select folders (detailed view mode)
https://bugs.launchpad.net/bugs/520118
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610899] [NEW] file transfer Empathy 2.30.2 reports: Error receiving his_filename from his_nick

[Detlef Lechner]

Public bug reported:

Binary package hint: empathy

Trying to receive a file transfer from Empathy 2.30.2, Empathy 2.30.2
reports: Error receiving his_filename from his_nick; Error while
trying to transfer the file. The progress bar freezes at 64%. The same
is true in the reverse direction. File transfer via Pidgin works all
right, though.

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: empathy 2.30.2-0ubuntu1
ProcVersionSignature: Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5
Uname: Linux 2.6.32-24-generic i686
Architecture: i386
Date: Wed Jul 28 16:49:51 2010
ProcEnviron:
 PATH=(custom, user)
 LANG=en_US.utf8
 SHELL=/bin/bash
SourcePackage: empathy

** Affects: empathy (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 lucid

-- 
file transfer Empathy 2.30.2 reports: Error receiving his_filename from 
his_nick
https://bugs.launchpad.net/bugs/610899
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to empathy in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610899] Re: file transfer Empathy 2.30.2 reports: Error receiving his_filename from his_nick

[Detlef Lechner]

** Attachment added: Dependencies.txt
   http://launchpadlibrarian.net/52640812/Dependencies.txt

-- 
file transfer Empathy 2.30.2 reports: Error receiving his_filename from 
his_nick
https://bugs.launchpad.net/bugs/610899
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to empathy in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 520118] Re: thunar select freezes after using mouse to select folders (detailed view mode)

[Antonio J. de Oliveira]

sorry Martin read #105, everything is ok with pcmanfm regarding
directory depth.

-- 
thunar select freezes after using mouse to select folders (detailed view mode)
https://bugs.launchpad.net/bugs/520118
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610899] Re: file transfer Empathy 2.30.2 reports: Error receiving his_filename from his_nick

[Omer Akram]

which protocol are you using to transfer files? e.g. gtalk, jabber, msn?

** Changed in: empathy (Ubuntu)
   Status: New = Incomplete

-- 
file transfer Empathy 2.30.2 reports: Error receiving his_filename from 
his_nick
https://bugs.launchpad.net/bugs/610899
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to empathy in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 470624] Re: Rhythmbox doesn't use Gnome network proxy settings

[Bug Watch Updater]

** Changed in: rhythmbox
   Status: Unknown = New

-- 
Rhythmbox doesn't use Gnome network proxy settings
https://bugs.launchpad.net/bugs/470624
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 520118] Re: thunar select freezes after using mouse to select folders (detailed view mode)

[Martin Pitt]

** Tags added: verification-done
** Tags removed: verification-needed

-- 
thunar select freezes after using mouse to select folders (detailed view mode)
https://bugs.launchpad.net/bugs/520118
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 520118] Re: thunar select freezes after using mouse to select folders (detailed view mode)

[Launchpad Bug Tracker]

This bug was fixed in the package pcmanfm - 0.5.2+svn20091029-1ubuntu3.1

---
pcmanfm (0.5.2+svn20091029-1ubuntu3.1) lucid-proposed; urgency=low

  * debian/patches/02-exo-treeview-fix.patch
   - Backport patch from exo to fix treeview on detailled list view.
 See xfce bug 6230, LP: #520118
 -- Julien Lavergne gi...@ubuntu.com   Fri, 21 May 2010 18:41:47 +0200

** Changed in: pcmanfm (Ubuntu Lucid)
   Status: Fix Committed = Fix Released

-- 
thunar select freezes after using mouse to select folders (detailed view mode)
https://bugs.launchpad.net/bugs/520118
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610908] [NEW] Enter a Password to unlock the volume window got no title

[Dominik]

Public bug reported:

Binary package hint: gvfs

When inserting a encrypted Luks-Volume gvfs pops up a new window asking
for the password. This window got no Title set, so it apears as
Untitled Window in the Task-Bar. See the attached screenshot. Only a
small bug, but perhaps this can be fixed.

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: gvfs 1.6.1-0ubuntu1build1
ProcVersionSignature: Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5
Uname: Linux 2.6.32-24-generic i686
Architecture: i386
CheckboxSubmission: 0865b47e519e0290dda61350cf2b9161
CheckboxSystem: edda5d4f616ca792bf437989cb597002
Date: Wed Jul 28 17:17:42 2010
ProcEnviron:
 LANGUAGE=en_US:en
 LANG=en_GB.utf8
 SHELL=/bin/bash
SourcePackage: gvfs

** Affects: gvfs (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 lucid

-- 
Enter a Password to unlock the volume window got no title
https://bugs.launchpad.net/bugs/610908
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gvfs in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610908] Re: Enter a Password to unlock the volume window got no title

[Dominik]

** Attachment added: Screenshot of the window
   http://launchpadlibrarian.net/52642000/Screenshot.png

** Attachment added: Dependencies.txt
   http://launchpadlibrarian.net/52641916/Dependencies.txt

-- 
Enter a Password to unlock the volume window got no title
https://bugs.launchpad.net/bugs/610908
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gvfs in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 572985] Re: backup settings option uses unhelpful yes/no dialog

[Andrew]

** Changed in: evolution (Ubuntu)
 Assignee: Andrew (and471) = (unassigned)

-- 
backup settings option uses unhelpful yes/no dialog
https://bugs.launchpad.net/bugs/572985
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 588577] Re: evince forgets view preferences

[Bug Watch Updater]

** Changed in: evince
   Status: Confirmed = Fix Released

-- 
evince forgets view preferences
https://bugs.launchpad.net/bugs/588577
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evince in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 23810] Re: Evolution is unusable in 800x600

[Romano Giannetti]

...and I just noticed that the same dialog, in the Junk tab, *do* have
a scrollbar. Sigh.

-- 
Evolution is unusable in 800x600
https://bugs.launchpad.net/bugs/23810
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a direct subscriber.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 575500] Re: refuses to open files with incorrect encoding

[arkmundi]

My solution to the problem:
iconv -f 'UTF-8' -t 'ASCII//IGNORE' -o output-file-name --verbose 
input-file-name

The -t 'ASCII//IGNORE' option insures that the offensive characters will
be discarded from the output, and the --verbose option tells you where
they were in the file.

-- 
refuses to open files with incorrect encoding
https://bugs.launchpad.net/bugs/575500
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gedit in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610930] [NEW] Nautilus crashes when trying to form preview of malformed SVG image.

[Lorem Daijoh]

Public bug reported:

Symptoms:

Nautilus crashes when trying to form preview of malformed SVG image e.g.
when opening the  containing folder. If the image is placed on the
Desktop, Nautilus will go into crash-restart loop.

Culprit:

Malformed SVG file that has style attribute containing zero length
property value. Few examples below:

First perfectly OK svg file.

- example.svg - WORKING 8 (file cutline)
svg
circle style=fill:red cx=100 cy=100 r=100/
/svg
8

Removed the red to make zero length fill-value. Will crash nautilus.

- example.svg - NONWORKING -8
svg
circle style=fill: cx=100 cy=100 r=100/
/svg
8

Added whitespace to make fill-value non zero length. This works again,
although the circle will be completely black.

- example.svg - WORKING 8
svg
circle style=fill:  cx=100 cy=100 r=100/
/svg
8

Added standard delimiter right after the :. Fill-value is again zero-
length and causes Nautilus to crash.

- example.svg - NONWORKING -8
svg
circle style=fill:;  cx=100 cy=100 r=100/
/svg
8

So it is pretty clear that style attribute containing zero length
property value will cause troubles. Hopefully this will help to find and
fix the bug.

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: librsvg2-2 2.26.3-0ubuntu1
ProcVersionSignature: Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5
Uname: Linux 2.6.32-23-generic x86_64
NonfreeKernelModules: fglrx
Architecture: amd64
Date: Wed Jul 28 19:01:47 2010
InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429)
ProcEnviron:
 LANGUAGE=en
 LANG=en_GB.utf8
 SHELL=/bin/bash
SourcePackage: librsvg

** Affects: librsvg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug lucid

-- 
Nautilus crashes when trying to form preview of malformed SVG image.
https://bugs.launchpad.net/bugs/610930
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to librsvg in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610930] Re: Nautilus crashes when trying to form preview of malformed SVG image.

[Lorem Daijoh]

** Attachment added: Dependencies.txt
   http://launchpadlibrarian.net/52643597/Dependencies.txt

-- 
Nautilus crashes when trying to form preview of malformed SVG image.
https://bugs.launchpad.net/bugs/610930
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to librsvg in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 607123] Re: nautilus crashed with SIGSEGV in g_slice_free1() on ejecting a mp3 player

[Steffen Goetz]

I tried, but could not reproduce the crash. However I did produce a Valgrind 
log for Nautilus during the mentioned operations and it looks as if it is 
reporting memory leaks and errors (see attachment).
I will still try to reproduce the crash...
 

** Attachment added: valgrind-log-nautilus.tar.gz
   http://launchpadlibrarian.net/52643826/valgrind-log-nautilus.tar.gz

-- 
nautilus crashed with SIGSEGV in g_slice_free1() on ejecting a mp3 player
https://bugs.launchpad.net/bugs/607123
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 575410] Re: clock-applet freezes when clicking on time

[Cesare Mastroianni]

Hi there. I prevented You to receive some other messages from me: from July 13 
till now I experienced days when the but appeared and days when the bug 
vanished.

Today I tried a workaround read from bug #439448 - comment #205 - I
added a 3 seconds delay at gnome-panel startup. Then I tried to reboot
my sytem MANY TIMES and now I can say that the clock applet works
correctly at startup.

This is not a bug fix but a simply workaround. I cannot argue why the
3 seconds delay at gnome panel startup let it works.

Ciao
CM

-- 
clock-applet freezes when clicking on time
https://bugs.launchpad.net/bugs/575410
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 439448] Re: visual corruption affecting several panel applets

[Cesare Mastroianni]

I tried the 3 seconds delay and it works for me. Moreover, the 3 seconds delay 
fixes for me another bug, which was bug #575410 about clock applet.

Ciao
CM

-- 
visual corruption affecting several panel applets
https://bugs.launchpad.net/bugs/439448
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610937] [NEW] YouTUBE support broken

[Martin-Éric Racine]

Public bug reported:

(Note: I really don't know why Totem insisted on filing this bug against
gstreamer, but anyhow...)

Since a few days, support to playback YouTube videos in Totem is broken
again. The thumbnails appear as normal in the sidebar, but clicking on
any of them returns a you might not have sufficient permissions to
access this content warning.

Trying to run Totem from command line on a terminal, we notice the
following debug message:

** Message: Error: 
http://www.youtube.com/get_video?video_id=Ti-848bKhd0t=vjVQa1PpcFM77_dKTh5EfXDVVGOpbVgZSPi-pkHJDqQ%3Dfmt=18:
 Not Found
gstsouphttpsrc.c(1096): gst_soup_http_src_parse_status (): 
/GstPlayBin2:play/GstURIDecodeBin:uridecodebin0/GstSoupHTTPSrc:source:
404 Not Found

Should I assume that Totem simply hasn't kept up with YouTube's ever-
changing URL format?

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: libgstreamer0.10-0 0.10.28-1
ProcVersionSignature: Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5
Uname: Linux 2.6.32-24-generic i686
Architecture: i386
Date: Wed Jul 28 19:17:48 2010
ProcEnviron:
 LANGUAGE=fi_FI:fi:en_US:en
 PATH=(custom, user)
 LANG=fi_FI.UTF-8
 SHELL=/bin/bash
SourcePackage: gstreamer0.10

** Affects: gstreamer0.10 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 lucid

-- 
YouTUBE support broken
https://bugs.launchpad.net/bugs/610937
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gstreamer0.10 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610937] Re: YouTUBE support broken

[Martin-Éric Racine]

** Attachment added: Dependencies.txt
   http://launchpadlibrarian.net/52644128/Dependencies.txt

-- 
YouTUBE support broken
https://bugs.launchpad.net/bugs/610937
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gstreamer0.10 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610940] [NEW] When power is unplugged the system hibernates

[chanux]

Public bug reported:

Binary package hint: gnome-power-manager

This bug looks a lot like bug #472717 but I report since I see
differences.

Note: Apparently my batteryy is broken so that ubuntu reports laptop
battery capacity is low (42.3%) at the startup.

I'm using Ubuntu 10.04 (freshly Installed recently preserving /home)

Once I unplug the power it prompts to hibernate saying battery capacity is 0.
But when checked on pallette icon it reports 40 mins remaining time.

If I OK the hibernate dialog, machine hibernates. If I Cancel it machine
locks down.

And sometimes it hibernates right after waking up from hibernate. (I say
sometimes because I only have memories of happening this once or twice
and couldn't test and confirm).

I installed xfce4-power-manager and started using it and now I don't
have any problem.

** Affects: gnome-power-manager (Ubuntu)
 Importance: Undecided
 Status: New

-- 
When power is unplugged the system hibernates
https://bugs.launchpad.net/bugs/610940
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-power-manager in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 455421] Re: rhythmbox crashed with SIGSEGV in g_object_set()

[Phil Ayres]

I see a similar issue in Lucid, up to date as of yesterday's updates.

In syslog I see this at the time of the crash. I included the pulseaudio
ratelimit message just before, in case it is relevant.

Jul 28 12:28:51 consected-sv1-001 pulseaudio[1670]: ratelimit.c: 130 events 
suppressed
Jul 28 12:29:17 consected-sv1-001 kernel: [15882.976141] __ratelimit: 6 
callbacks suppressed
Jul 28 12:29:17 consected-sv1-001 kernel: [15882.976155] rhythmbox[30966]: 
segfault at 0 ip (null) sp b233e16c error 4 in 
libgdk-x11-2.0.so.0.2000.1[11+93000]

One thing I observed is this seems to happen more often if I change the
volume soon after opening Rhythmbox and just after starting to play a
track. Perhaps it doesn't like a change in volume at the same time a lot
of other things are going on, such as trying to get a bunch of data
streamed.

Phil

-- 
rhythmbox crashed with SIGSEGV in g_object_set()
https://bugs.launchpad.net/bugs/455421
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gstreamer0.10 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 193325] Re: unknown media type during update

[NoOp]

The errors containing 'Unknown media type in type 'all/all'' etc., are from 
kde.xml (kdelib5). See:
https://bugs.edge.launchpad.net/ubuntu/+source/shared-mime-info/+bug/289592
[Unknown media types in /usr/share/mime/packages/kde.xml]
http://bugs.freedesktop.org/show_bug.cgi?id=16816


** Bug watch added: freedesktop.org Bugzilla #16816
   http://bugs.freedesktop.org/show_bug.cgi?id=16816

-- 
unknown media type during update
https://bugs.launchpad.net/bugs/193325
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is the registrant for shared-mime-info.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610948] [NEW] gnome-appearance-properties fails to change cursor pointer

[keepitsimpleengr]

Public bug reported:

Binary package hint: gdm

~# lsb_release -rd
Description:Ubuntu 10.04.1 LTS
Release:10.04
==
~# apt-cache policy gdm
gdm:
  Installed: 2.30.2.is.2.30.0-0ubuntu3
  Candidate: 2.30.2.is.2.30.0-0ubuntu3
  Version table:
 *** 2.30.2.is.2.30.0-0ubuntu3 0
500 http://mirrors.us.kernel.org/ubuntu/ lucid-updates/main Packages
100 /var/lib/dpkg/status
 2.30.0-0ubuntu5 0
500 http://mirrors.us.kernel.org/ubuntu/ lucid/main Packages
==
Following instructions in https://help.ubuntu.com/community/UbuntuEyeCandy to 
change mouse cursor
nothing changes.  I expected to be able to change the mouse cursor.
==

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: gdm 2.30.2.is.2.30.0-0ubuntu3
ProcVersionSignature: Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5
Uname: Linux 2.6.32-24-generic x86_64
NonfreeKernelModules: nvidia
Architecture: amd64
Date: Wed Jul 28 09:41:29 2010
InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429)
ProcEnviron:
 LANG=en_US.utf8
 SHELL=/bin/bash
SourcePackage: gdm

** Affects: gdm (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug cursor gnome-appearance-properties lucid

-- 
gnome-appearance-properties fails to change cursor pointer
https://bugs.launchpad.net/bugs/610948
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610948] Re: gnome-appearance-properties fails to change cursor pointer

[keepitsimpleengr]

** Attachment added: Screenshot-Customize Theme.png
   http://launchpadlibrarian.net/52645254/Screenshot-Customize%20Theme.png

** Attachment added: Dependencies.txt
   http://launchpadlibrarian.net/52644882/Dependencies.txt

-- 
gnome-appearance-properties fails to change cursor pointer
https://bugs.launchpad.net/bugs/610948
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610955] [NEW] yelp closes when selecting hyperlink

[keepitsimpleengr]

Public bug reported:

Binary package hint: yelp

~$ sudo -i
[sudo] password for ljohnson: 
r...@kise-005:~# lsb_release -rd
Description:Ubuntu 10.04.1 LTS
Release:10.04
:~# apt-cache policy yelp
yelp:
  Installed: 2.30.0-0ubuntu2
  Candidate: 2.30.0-0ubuntu2
  Version table:
 *** 2.30.0-0ubuntu2 0
500 http://mirrors.us.kernel.org/ubuntu/ lucid/main Packages
100 /var/lib/dpkg/status
==
When clicking on ghelp:user-guide#prefs (see attachment) yelp closes.  I 
expected it to open an appropriate window.

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: yelp 2.30.0-0ubuntu2
ProcVersionSignature: Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5
Uname: Linux 2.6.32-24-generic x86_64
NonfreeKernelModules: nvidia
Architecture: amd64
Date: Wed Jul 28 10:02:42 2010
InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429)
ProcEnviron:
 LANG=en_US.utf8
 SHELL=/bin/bash
SourcePackage: yelp

** Affects: yelp (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug help lucid yelp

-- 
yelp closes when selecting hyperlink
https://bugs.launchpad.net/bugs/610955
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to yelp in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610955] Re: yelp closes when selecting hyperlink

[keepitsimpleengr]

** Attachment added: Screenshot-Customizing Your Computer.png
   
http://launchpadlibrarian.net/52646218/Screenshot-Customizing%20Your%20Computer.png

** Attachment added: Dependencies.txt
   http://launchpadlibrarian.net/52645975/Dependencies.txt

-- 
yelp closes when selecting hyperlink
https://bugs.launchpad.net/bugs/610955
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to yelp in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 401823] Re: Gdk-WARNING **: XID collision, trouble ahead

[tekstr1der]

As stated above by Zack Evans and confirmed by many previous me-too's,
this bug is still present in GTK on an up-to-date lucid install. This
occurs with the latest chromium stable build for me. It is not fixed.
Changing status to correctly reflect... status.

** Changed in: gtk+2.0 (Ubuntu Lucid)
   Status: Fix Released = Confirmed

-- 
Gdk-WARNING **: XID collision, trouble ahead
https://bugs.launchpad.net/bugs/401823
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 596022] Re: Package description is unhelpful

[Launchpad Bug Tracker]

** Branch linked: lp:ubuntu/xchat-gnome

-- 
Package description is unhelpful
https://bugs.launchpad.net/bugs/596022
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to xchat-gnome in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 569819] Re: wallpaper in not extended in twinview

[Carlos Valente]

???

-- 
wallpaper in not extended in twinview
https://bugs.launchpad.net/bugs/569819
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610982] [NEW] Problems when running gconf-based applications on a remote desktop

[Till Kamppeter]

Public bug reported:

Binary package hint: gconf

I am SSHing (ssh -X ...) to a Maverick machine from a Lucid machine.
In the terminal I start X applications (thunderbird, OpenOffice.org)
which are running on the Maverick machine and whose windows are
displaying on the desktop of the Lucid machine.

There I have several problems with GConf.

When I start Thunderbird, I get a pop-up window telling An error
occured while loading or saving configuration information for
thunderbird-bin.. Clicking on Details saysFailed to contact
configuration server; the most common cause is a missing or
misconfigured D-Bus session bus daemon. See
http://projects.gnome.org/gconf/ for information.(Details -  1: Failed
to get connection to session: Failed to connect to socket /tmp/dbus-
pQzGHgatiO: Connection refused). This message repeats several times
with different names of the temporary file. Thunderbird takes very long
to start and the window is grayed for a longer time. Also during the
Thunderbird session the window grays very often and freezes, especially
it grays half a minute on the download of every single newsgroup
message. All this does not happen when starting Thunderbird locally on
the desktop of the Maverick box.

When starting ooffice in the SSH terminal, it shows the splash screen
and then gives the message Failed to contact configuration server; the
most common cause is a missing or misconfigured D-Bus session bus
daemon. See http://projects.gnome.org/gconf/ for information.(Details -
1: Failed to get connection to session: Failed to connect to socket /tmp
/dbus-pQzGHgatiO: Connection refused) (same message as in Thunderbird)
repeatedly in an infinite loop and the main window never appears.
OpenOffice.org works correctly when started on the local desktop.

ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: libgconf2-4 2.31.6-0ubuntu1
ProcVersionSignature: Ubuntu 2.6.35-11.16-generic 2.6.35-rc5
Uname: Linux 2.6.35-11-generic x86_64
Architecture: amd64
Date: Wed Jul 28 19:21:41 2010
EcryptfsInUse: Yes
ProcEnviron:
 PATH=(custom, user)
 LANG=en_US.utf8
 SHELL=/bin/bash
SourcePackage: gconf

** Affects: gconf (Ubuntu)
 Importance: High
 Status: New


** Tags: amd64 apport-bug maverick

-- 
Problems when running gconf-based applications on a remote desktop
https://bugs.launchpad.net/bugs/610982
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gconf in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610982] Re: Problems when running gconf-based applications on a remote desktop

[Till Kamppeter]

** Attachment added: Dependencies.txt
   http://launchpadlibrarian.net/52646655/Dependencies.txt

** Changed in: gconf (Ubuntu)
   Importance: Undecided = High

-- 
Problems when running gconf-based applications on a remote desktop
https://bugs.launchpad.net/bugs/610982
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gconf in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 375591] [NEW] f-spot nautilus reality inconsistency when rotating images

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

When rotating an image in f-spot, f-spot does not really rotate that image, 
only shows you rotated, furthermore nautilus now shows you that rotated image 
in its rotated state too, while in reality the image is NOT rotated.
When i then upload the image to imageshack, a blog, a webspace, usb stick or 
whatever, the image is in its original unmodified way.
This inconsistency is unwanted, when i want to rotate an image, i really want 
it rotated not just shown to me in a rotated way, also leads to complications 
and unwanted results.
Please include a way to really rotate it and if not, at least make nautilus 
show the image *correctly*

** Affects: f-spot (Ubuntu)
 Importance: Undecided
 Status: Incomplete

-- 
f-spot nautilus reality inconsistency when rotating images
https://bugs.launchpad.net/bugs/375591
You received this bug notification because you are a member of Ubuntu Desktop 
Bugs, which is subscribed to f-spot in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 375591] Re: f-spot nautilus reality inconsistency when rotating images

[Fabio Marconi]

Thank you for taking the time to report this bug and helping to make Ubuntu 
better.
Is this bug reproducible with the latest Lucid packages ?
Thanks in advance.

** Changed in: ubuntu
   Status: New = Incomplete

** Package changed: ubuntu = f-spot (Ubuntu)

-- 
f-spot nautilus reality inconsistency when rotating images
https://bugs.launchpad.net/bugs/375591
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to f-spot in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] Re: F-spot no longer works

[John Vivirito]

With new install of 10.04 and an upgrade to 10.10 F-spot crashes as it
was before when trying to import pictures. I will run apport-collect to
gather new info.

** Tags added: apport-collected

** Description changed:

  Binary package hint: gnome-screensaver
  
  A few days ago my screen-savers worked great, now i find that F-spot
  screen saver no longer works, they are in my favorites so it should
  work. I don't know if this applies but i opened f-spot to check on tags
  but i will post it here anyway. It seems that a lot if not all work as
  expected. i haven't tried the Webcollage screen saver, that has been
  another one that has given me issues.
  
  An unhandled exception was thrown: Filename path must be absolute
  
at Hyena.SafeUri.FilenameToUri (System.String localPath) [0x0] 
at Hyena.SafeUri..ctor (System.String uri) [0x0] 
at FSpot.App.HandleImport (System.String path) [0x0] 
at FSpot.App.Import (System.String path) [0x0] 
at FSpot.Driver.Main (System.String[] args) [0x0] 
  .NET Version: 2.0.50727.1433
  
  Assembly Version Information:
  
  SemWeb (0.7.1.0)
  gio-sharp (2.14.0.0)
  FSpot.Exporters.RetroactiveRoll (0.7.0.0)
  FSpot.Exporters.CDExport (0.7.0.0)
  FSpot.Exporters.FlickrExport (0.7.0.0)
  FSpot.Exporters.ScreensaverConfig (0.7.0.0)
  FSpot.Exporters.GalleryExport (0.7.0.0)
  FSpot.Exporters.PicasaWeb (0.7.0.0)
  FSpot.Exporters.HashJob (0.7.0.0)
  FSpot.Exporters.FolderExport (0.7.0.0)
  FSpot.Exporters.SmugMugExport (0.7.0.0)
  glade-sharp (2.12.0.0)
  FSpot.Bling (0.7.0.0)
  pango-sharp (2.12.0.0)
  FSpot.Query (0.7.0.0)
  gnome-sharp (2.24.0.0)
  System.Transactions (2.0.0.0)
  System.Data (2.0.0.0)
  Mono.Data.SqliteClient (2.0.0.0)
  gtk-sharp-beans (2.14.0.0)
  FSpot.JobScheduler (0.7.0.0)
  System.Configuration (2.0.0.0)
  FSpot.Widgets (0.7.0.0)
  System.Xml (2.0.0.0)
  gconf-sharp (2.24.0.0)
  System.Core (3.5.0.0)
  unique-sharp (1.0.0.0)
  System (2.0.0.0)
  Mono.Addins (0.4.0.0)
  FSpot.Cms (0.7.0.0)
  FSpot.Core (0.7.0.0)
  FSpot.Platform (0.7.0.0)
  Mono.Posix (2.0.0.0)
  gdk-sharp (2.12.0.0)
  Hyena (0.7.0.0)
  atk-sharp (2.12.0.0)
  gtk-sharp (2.12.0.0)
  Mono.Addins.Setup (0.4.0.0)
  glib-sharp (2.12.0.0)
  FSpot.Utils (0.7.0.0)
  f-spot (0.7.0.0)
  mscorlib (2.0.0.0)
  
  Platform Information: Linux 2.6.35-5-generic i686 unknown GNU/Linux
  
  Distribution Information:
  
  [/etc/debian_version]
  squeeze/sid
  
  [/etc/lsb-release]
  DISTRIB_ID=Ubuntu
  DISTRIB_RELEASE=10.10
  DISTRIB_CODENAME=maverick
  DISTRIB_DESCRIPTION=Ubuntu maverick (development branch)
  
  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: gnome-screensaver 2.30.0-1ubuntu1
  ProcVersionSignature: Ubuntu 2.6.35-5.6-generic 2.6.35-rc3
  Uname: Linux 2.6.35-5-generic i686
  NonfreeKernelModules: nvidia
  Architecture: i386
  Date: Fri Jun 25 09:54:58 2010
  GnomeSessionIdleInhibited: No
  GnomeSessionInhibitors: None
  InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100427.1)
  ProcEnviron:
   PATH=(custom, user)
   LANG=C
   SHELL=/bin/bash
  SourcePackage: gnome-screensaver
  WindowManager: metacity
+ --- 
+ Architecture: i386
+ DistroRelease: Ubuntu 10.10
+ GnomeSessionIdleInhibited: No
+ GnomeSessionInhibitors: None
+ InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100427.1)
+ NonfreeKernelModules: nvidia
+ Package: gnome-screensaver 2.30.0-1ubuntu1
+ PackageArchitecture: i386
+ ProcEnviron:
+  PATH=(custom, user)
+  LANG=C
+  SHELL=/bin/bash
+ ProcVersionSignature: Ubuntu 2.6.35-11.16-generic 2.6.35-rc5
+ Tags: maverick maverick
+ Uname: Linux 2.6.35-11-generic i686
+ UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
+ WindowManager: metacity

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] Dependencies.txt

[John Vivirito]

apport information

** Attachment added: Dependencies.txt
   http://launchpadlibrarian.net/52648585/Dependencies.txt

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] GconfGnomeLockdown.txt

[John Vivirito]

apport information

** Attachment added: GconfGnomeLockdown.txt
   http://launchpadlibrarian.net/52648587/GconfGnomeLockdown.txt

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] GconfGnomePowerManager.txt

[John Vivirito]

apport information

** Attachment added: GconfGnomePowerManager.txt
   http://launchpadlibrarian.net/52648588/GconfGnomePowerManager.txt

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] GconfGnomeScreensaver.txt

[John Vivirito]

apport information

** Attachment added: GconfGnomeScreensaver.txt
   http://launchpadlibrarian.net/52648599/GconfGnomeScreensaver.txt

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] GconfGnomeSession.txt

[John Vivirito]

apport information

** Attachment added: GconfGnomeSession.txt
   http://launchpadlibrarian.net/52648602/GconfGnomeSession.txt

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] XorgConf.txt

[John Vivirito]

apport information

** Attachment added: XorgConf.txt
   http://launchpadlibrarian.net/52648610/XorgConf.txt

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] XorgLog.txt

[John Vivirito]

apport information

** Attachment added: XorgLog.txt
   http://launchpadlibrarian.net/52648611/XorgLog.txt

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] XorgLogOld.txt

[John Vivirito]

apport information

** Attachment added: XorgLogOld.txt
   http://launchpadlibrarian.net/52648612/XorgLogOld.txt

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 610982] Re: Problems when running gconf-based applications on a remote desktop

[Till Kamppeter]

Some additional notes:

1. My Inbox contains around 10 mails. To avoid getting hit by bug
518336 I have turned off the global search.

2. Last week thunderbird-bin consumed 100% CPU, but after a kernel
update to fix bug 609113 thunderbird did not consume 100% CPU any more
while it is frozen/grayed.

3. During the freeze (grayed) phases Thunderbird probably tries to
access GConf and times out, but I am not sure what really happens.

-- 
Problems when running gconf-based applications on a remote desktop
https://bugs.launchpad.net/bugs/610982
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gconf in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 598514] Re: F-spot no longer works

[John Vivirito]

Here is the output from running f-spot during import

** Attachment added: f-spot_crash_log.txt
   http://launchpadlibrarian.net/52648842/f-spot_crash_log.txt

-- 
F-spot no longer works
https://bugs.launchpad.net/bugs/598514
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 609843] Re: gnome-search-tool consumes alot of memory while attempting to copy files from search results

[ERE]

** Summary changed:

- memory leaks
+ gnome-search-tool consumes alot of memory while attempting to copy files from 
search results

-- 
gnome-search-tool consumes alot of memory while attempting to copy files from 
search results
https://bugs.launchpad.net/bugs/609843
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-utils in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs