[Bug 1593988] Re: Nautilus failed to start

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: nautilus (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1593988

Title:
  Nautilus failed to start

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1593988/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1573206] Re: GNOME Software does not install third-party .deb packages

[Andres Vega]

*** This bug is a duplicate of bug 1573408 ***
https://bugs.launchpad.net/bugs/1573408

I am also having this problem.

When are they going to fix this bug?

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1573206

Title:
  GNOME Software does not install third-party .deb packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/gdebi/+bug/1573206/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

Re: [Bug 1501250] Re: double clicking on a URL drops the protocol from the URL

[James Troup]

Egmont Koblinger  writes:

> Double clicking, by design, is _not_ meant to select URLs.

Really?  Which design is that?

And regardless of whether or not double click is meant to select URLs,
it's a literal fact that it did in fact (largely) select URLs for many
years.

> So, guys, there's nothing to see here. Please move on.

You're obviously welcome to your opinion, but it's a little strange to
end 77 lines and 705 words with the claim that there is "nothing to
see here" and a request to "move on".

> This bug should be closed as invalid.

That's your opinion; in my opinion this is a regression in Ubuntu.

-- 
James

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1501250

Title:
  double clicking on a URL drops the protocol from the URL

To manage notifications about this bug go to:
https://bugs.launchpad.net/vte/+bug/1501250/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1624171] Re: systemd-logind error at startup if systemd-shim and upstart-sysv

[Martin Wimpress]

** Also affects: systemd-shim (Ubuntu)
   Importance: Undecided
   Status: New

** Also affects: upstart (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to systemd-shim in Ubuntu.
https://bugs.launchpad.net/bugs/1624171

Title:
  systemd-logind error at startup if systemd-shim and upstart-sysv

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-mate/+bug/1624171/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1629754] Re: Add-ons not showing

[Mathew Hodson]

** No longer affects: gnome-software (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1629754

Title:
  Add-ons not showing

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/appstream-glib/+bug/1629754/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1629983] Re: Temperature in Weather Report applet impossible to read when using Ambiance

[Launchpad Bug Tracker]

This bug was fixed in the package ubuntu-themes -
16.10+16.10.20161005-0ubuntu1

---
ubuntu-themes (16.10+16.10.20161005-0ubuntu1) yakkety; urgency=medium

  [ Alberts Muktupāvels ]
  * gnome-panel.css: Fix weather applet text color. (LP: #1629983)

 -- Dmitry Shachnev   Wed, 05 Oct 2016 17:59:11
+

** Changed in: ubuntu-themes (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-applets in Ubuntu.
https://bugs.launchpad.net/bugs/1629983

Title:
  Temperature in Weather Report applet impossible to read when using
  Ambiance

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-applets/+bug/1629983/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630780] [NEW] S.M.A.R.T. not supported in AHCI mode

[James]

Public bug reported:

The S.M.A.R.T. settings are not available through the gnome-disks GUI on
a Dell Inspiron 15 3000 Series laptop.

The hard drive and BIOS support S.M.A.R.T., however.

A workaround is to go into the BIOS and change the SATA mode from AHCI
to legacy ATA.

HOWEVER, this workaround should not be necessary because, although the
command-line tool smartctl SEEMS not to work in AHCI mode, passing it
the -d ata flag (overriding its default IDE mode which required the hard
drive controller's legacy ATA mode) allows it to read S.M.A.R.T. data
from the hard drive while in AHCI mode.

tl;dr: gnome-disks does not support S.M.A.R.T. over ACHI, even though
there are no technical obstacles (such as ioctls, drivers, etc) to
supporting it.

** Affects: gnome-disk-utility (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-disk-utility in Ubuntu.
https://bugs.launchpad.net/bugs/1630780

Title:
  S.M.A.R.T. not supported in AHCI mode

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-disk-utility/+bug/1630780/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1101903] Re: Constantly rising memory usage by gnome-panel

[Alberts Muktupāvels]

** Changed in: gnome-panel (Ubuntu)
   Status: Confirmed => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in Ubuntu.
https://bugs.launchpad.net/bugs/1101903

Title:
  Constantly rising memory usage by gnome-panel

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-panel/+bug/1101903/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1629855] Re: month names reversed (hebrew)

[Egmont Koblinger]

Noone knows how to do BiDi in terminal emulators. Some terminal
emulators (e.g. konsole) apply some magic which fixes certain things
while breaks others, gnome-terminal is not one of them.

See e.g. https://bugzilla.gnome.org/show_bug.cgi?id=321490.

** Bug watch added: GNOME Bug Tracker #321490
   https://bugzilla.gnome.org/show_bug.cgi?id=321490

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1629855

Title:
  month names reversed (hebrew)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/1629855/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1501250] Re: double clicking on a URL drops the protocol from the URL

[Egmont Koblinger]

I "love" how much people still complain and fail to understand the
previous comments...

So let me try it once again...

Double clicking, by design, is _not_ meant to select URLs.

Double clicking selects a continuous sequence of certain (configurable)
characters, and it has do be able to do this even when you double click
outside of a URL.

At one point this configurability was removed, but due to popular demand
(that is: plenty of complaints) it was brought back in the very next
version (alas as a hidden setting, without a UI).

There were many debates around what the default set of such characters
should be, and the reason it is configurable is because there's no
single right answer, it's a matter of taste, or rather, a matter of use
cases. The only clear conclusion was that generally it's better to have
fewer characters in the set rather than more, that is, double clicking
should rather select shorter segments than long ones. This is because if
it selects a shorter section than desired, it is still easy to double-
click and then drag the mouse to extend it by other sections, whereas
the other way around this cannot be done.

This was the reason behind the removal of ":" from the default set, and
continuing this trend if we were to change anything, it would much
rather be the removal of "/" too rather than adding ":" back.

If we removed "/" too, it would mean that double clicking on a URL would
highlight even much shorter parts of it: either the hostname only, or
one path component only. Would you still complain then that it's broken,
or would it be more obvious to you and easier for you to accept that
double clicking is not designed for selecting a URL?

As stated above, if you add ":" to the set (which you can do easily), it
would still not perfectly select URLs, there would be differences
("bugs" if you will). Double clicking behavior is very simple: certain
characters are selected, while the rest are not, without looking at the
larger picture. URLs, on the other hand, are wy more complex to
detect. See https://git.gnome.org/browse/gnome-terminal/tree/src
/terminal-regex.h?h=gnome-3-22 to get an idea how crazily heavily
complex the regular expressions are, and it's still not perfect (it's
not even possible to get it perfect since it's not defined anywhere how
to detect the boundaries of a URL in a text flow), but is quite good.

Theoretically the code could be changed to select based on characters
when double clicking outside a URL, and the entire URL when clicking
inside. But this dual behavior would be even more confusing (i.e.
broken). Then the currently available and luckily configurable set of
word characters would be ignored within URLs (and what if let's say you
actually wanted to easily highlight parts of the URL and hence you
removed "/" from wordchars? you'd find that it doesn't work) whereas
you'd get another way of copying the URL for which you already have one
method.

Also, beginning with Yakkety gnome-terminal recognizes numbers, and even
though (as opposed to URLs) it doesn't highlight them on mouseover, it
provides useful information on a right click. So then should this one
also modify the double click behavior to stop at number boundaries? Why
or why not?

There is a way to conveniently copy an entire URL, and this is in the
right-click menu.

Double clicking was never meant to do this, and modifying double
clicking to do this would cause more harm than good, or at the very
least definitely more inconsistency and less configurability.

Adding ":" back to the list of word chars wouldn't fix the issue (there
would still be cases when the URL is not detected properly) and would
cause other problems elsewhere.

Seriously, the only reasonable thing I can imagine to do is to remove
the "/" from the default set to make it even more obvious that double
clicking on a URL is not broken, it is intended to do something entirely
different, something unrelated to URL recognition.

So, guys, there's nothing to see here. Please move on.

Use every feature for what it was designed for. Double click to select
the continuous region of characters out of a given configurable set.
Right click -> Copy Link Address to copy the URL.

This bug should be closed as invalid.

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1501250

Title:
  double clicking on a URL drops the protocol from the URL

To manage notifications about this bug go to:
https://bugs.launchpad.net/vte/+bug/1501250/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630754] [NEW] outline in bad resolution when use other color than BLACK

[Renato S. Yamane]

Public bug reported:

When you use a text in a color different than BLACK, you can see an 
outline/contour in bad resolution.
Looks like the antialiasing is not in the same color of letters.
Check files attached.

ProblemType: Bug
DistroRelease: Ubuntu 15.10
Package: gimp 2.8.14-1ubuntu2.1
Uname: Linux 4.6.0-040600rc7-generic x86_64
ApportVersion: 2.19.1-0ubuntu5
Architecture: amd64
CurrentDesktop: KDE
Date: Wed Oct  5 17:39:05 2016
InstallationDate: Installed on 2014-03-08 (942 days ago)
InstallationMedia: Kubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140308)
ProcEnviron:
 LANGUAGE=pt_BR:pt:en
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=pt_BR.UTF-8
 SHELL=/bin/bash
SourcePackage: gimp
UpgradeStatus: Upgraded to wily on 2016-01-15 (263 days ago)

** Affects: gimp (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug wily

** Attachment added: "Gimp test file"
   https://bugs.launchpad.net/bugs/1630754/+attachment/4755416/+files/test.xcf

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gimp in Ubuntu.
https://bugs.launchpad.net/bugs/1630754

Title:
  outline in bad resolution when use other color than BLACK

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gimp/+bug/1630754/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630754] Re: outline in bad resolution when use other color than BLACK

[Renato S. Yamane]

** Attachment added: "my window - see the contour/outline of each letter"
   
https://bugs.launchpad.net/ubuntu/+source/gimp/+bug/1630754/+attachment/4755419/+files/gimp_window.jpg

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gimp in Ubuntu.
https://bugs.launchpad.net/bugs/1630754

Title:
  outline in bad resolution when use other color than BLACK

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gimp/+bug/1630754/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630751] [NEW] package systemd 231-9git1 failed to install/upgrade: triggers looping, abandoned

[Steven H]

Public bug reported:

Was trying to upgrade from 16.04 to 16.10 beta

ProblemType: Package
DistroRelease: Ubuntu 16.10
Package: systemd 231-9git1
Uname: Linux 4.7.3-040703-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
Date: Wed Oct  5 22:31:26 2016
ErrorMessage: triggers looping, abandoned
InstallationDate: Installed on 2016-09-13 (22 days ago)
InstallationMedia: Ubuntu-GNOME 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160720)
Lsusb:
 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
 Bus 001 Device 003: ID 8087:0a2a Intel Corp. 
 Bus 001 Device 002: ID 05c8:038e Cheng Uei Precision Industry Co., Ltd 
(Foxlink) 
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: HP HP ENVY Notebook
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.7.3-040703-generic 
root=UUID=fa0986da-ae48-47e2-9e62-a8ef25ce5b73 ro quiet splash vt.handoff=7
RelatedPackageVersions:
 dpkg 1.18.10ubuntu1
 apt  1.3
SourcePackage: systemd
Title: package systemd 231-9git1 failed to install/upgrade: triggers looping, 
abandoned
UpgradeStatus: Upgraded to yakkety on 2016-10-05 (0 days ago)
dmi.bios.date: 07/20/2016
dmi.bios.vendor: Insyde
dmi.bios.version: F.21
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: 81CC
dmi.board.vendor: HP
dmi.board.version: KBC Version 60.26
dmi.chassis.asset.tag: Chassis Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: HP
dmi.chassis.version: Chassis Version
dmi.modalias: 
dmi:bvnInsyde:bvrF.21:bd07/20/2016:svnHP:pnHPENVYNotebook:pvrType1ProductConfigId:rvnHP:rn81CC:rvrKBCVersion60.26:cvnHP:ct10:cvrChassisVersion:
dmi.product.name: HP ENVY Notebook
dmi.product.version: Type1ProductConfigId
dmi.sys.vendor: HP

** Affects: systemd (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package yakkety

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1630751

Title:
  package systemd 231-9git1 failed to install/upgrade: triggers looping,
  abandoned

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1630751/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1101903] Re: Constantly rising memory usage by gnome-panel

[Bug Watch Updater]

** Changed in: gnome-panel
   Status: Confirmed => Expired

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-panel in Ubuntu.
https://bugs.launchpad.net/bugs/1101903

Title:
  Constantly rising memory usage by gnome-panel

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-panel/+bug/1101903/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1582443] Re: [SRU] Update to 3.18.3 in Xenial

[Jeremy Bicha]

** Tags added: upgrade-software-version

** Tags added: xenial

** Also affects: gnome-settings-daemon (Ubuntu Xenial)
   Importance: Undecided
   Status: New

** Changed in: gnome-settings-daemon (Ubuntu Xenial)
   Importance: Undecided => Wishlist

** Changed in: gnome-settings-daemon (Ubuntu Xenial)
   Status: New => Triaged

** Changed in: gnome-settings-daemon (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/1582443

Title:
  [SRU] Update to 3.18.3 in Xenial

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1582443/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1623763] Re: GTK Inspector Statistics tab non-functional

[Jeremy Bicha]

** Also affects: gtk+3.0 (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1623763

Title:
  GTK Inspector Statistics tab non-functional

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-gnome/+bug/1623763/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630662] [NEW] Can't connect to CalDAV server

[Mikael]

Public bug reported:

I'm trying to connect Maya Calendar to caldav.one.com. I've setup
everything up as per the instructions from one.com. Still when I enter
my Username and Password and click OK I get back to the same window
asking for my Username and Password. I get no error message. I'm using
caldav.one.com on my phone and it works. Please let me know what further
details that are needed.

** Affects: evolution-data-server (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution-data-server in Ubuntu.
https://bugs.launchpad.net/bugs/1630662

Title:
  Can't connect to CalDAV server

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evolution-data-server/+bug/1630662/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1548933] Re: It only shows installed apps, not available ones

[Albert]

Dear Sirs,

I would like to fix this thing that is preventing ubuntu software center to 
work. But reading your sites I still unfortunately do not understand how.
Thank you if any help is available.

Kind regards,
Albert

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1548933

Title:
  It only shows installed apps, not available ones

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1548933/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1161670] Re: Order of operations is incorrect for exponents and parentheses

[madbiologist]

The gcalctool in Ubuntu 12.04 "Precise Pangolin" is a transitional
package for the GNOME desktop calculator. In Ubuntu 14.04 "Trusty Tahr"
and later, GNOME desktop calculator is called gnome-calculator. gnome-
calculator 1:3.10.3-0ubuntu0.1.1 in Ubuntu 14.04 "Trusty Tahr" evaluates
all of your examples as you expect it to.

** Changed in: gcalctool (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gcalctool in Ubuntu.
https://bugs.launchpad.net/bugs/1161670

Title:
  Order of operations is incorrect for exponents and parentheses

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gcalctool/+bug/1161670/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1623383] Re: Some restarts fail due to missing base devices

[Dimitri John Ledkov]

** Package changed: udev (Ubuntu) => systemd (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1623383

Title:
  Some restarts fail due to missing base devices

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1623383/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630618] [NEW] Shotwell gallery background incorrect

[Cliff Carson]

Public bug reported:

Unable to control the gallery background color.  When starting Shotwell
the background is black even though the preferences are set to a medium
gray.  With the preference window open changing the background color
does nothing except when it's move to the white side the tags change
color from white to black making them disappear.  Also, when selecting
anyone of the tags for display in the gallery the background changes to
a light gray leaving the tag text white making them unreadable.

ProblemType: Bug
DistroRelease: Ubuntu 16.10
Package: shotwell 0.22.0+git20160108.r1.f2fb1f7-0ubuntu2
ProcVersionSignature: Ubuntu 4.8.0-17.19-generic 4.8.0-rc7
Uname: Linux 4.8.0-17-generic x86_64
ApportVersion: 2.20.3-0ubuntu7
Architecture: amd64
CurrentDesktop: GNOME
Date: Wed Oct  5 10:32:10 2016
InstallationDate: Installed on 2016-08-08 (57 days ago)
InstallationMedia: Ubuntu-GNOME 16.10 "Yakkety Yak" - Alpha amd64 (20160808)
ProcEnviron:
 TERM=xterm-256color
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: shotwell
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: shotwell (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug yakkety

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to shotwell in Ubuntu.
https://bugs.launchpad.net/bugs/1630618

Title:
  Shotwell gallery background incorrect

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/shotwell/+bug/1630618/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630616] [NEW] Evolution unable to fetch email with exchange

[Anton Kozlovsky]

Public bug reported:

I configured evolution with an MS Exchange account. 
Expected result:
All messages from Exchange account should appear. New messages are coming and a 
system notifies the user about that.
What does happening:
In the bottom of the application I can see that there are few active processes 
such as "refreshing folder 'inbox'", "retrieving message '' 
in inbox", "scanning folders". 
I've waited for 10 minutes. Then restarted it and there were messages in 
'inbox' and in 'deleted' folders. However evolution still unable to fetch new 
messages.

Ubuntu 16.04 x64
Evolution 3.18.5.2

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: evolution 3.18.5.2-0ubuntu3
ProcVersionSignature: Ubuntu 4.4.0-38.57-generic 4.4.19
Uname: Linux 4.4.0-38-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
CurrentDesktop: Unity
Date: Wed Oct  5 17:28:13 2016
ExecutablePath: /usr/bin/evolution
InstallationDate: Installed on 2016-10-03 (2 days ago)
InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719)
SourcePackage: evolution
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: evolution (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

** Attachment added: "Screenshot"
   
https://bugs.launchpad.net/bugs/1630616/+attachment/4755102/+files/Screenshot%20from%202016-10-05%2017-31-30.png

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/1630616

Title:
  Evolution unable to fetch email with exchange

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1630616/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1623383] [NEW] Some restarts fail due to missing base devices

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

Arch: s390x
Release: Yakkety / 16.10

This happens on some (but not all) system starts with Yakkety. In Xenial
(which is using the same 4.4 kernel version the Yakkety systems were
using when the problem was first observed) this did not happen. The
system (LPAR) this was seen first was an upgrade from Xenial but since
then has been freshly installed with Yakkety. The same behaviour is seen
on a zVM guest running Yakkety.

The attached syslog shows a failed boot, followed by one that did work. Note 
the "Found device .*(sclp|encc00).*" messages in the good boot. Those are 
missing in the bad attempt and as a result networking and console fail to be 
usable. Also note, those boots were 4.8 kernels but we saw this with 4.4 
kernels, too.
This might be a systemd problem / race, I just filed it into udev for now as 
that better matches the not finding basic devices symptom.

** Affects: systemd (Ubuntu)
 Importance: Critical
 Assignee: Dimitri John Ledkov (xnox)
 Status: Confirmed


** Tags: s390x yakkety
-- 
Some restarts fail due to missing base devices
https://bugs.launchpad.net/bugs/1623383
You received this bug notification because you are a member of Ubuntu Desktop 
Bugs, which is subscribed to systemd in Ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1161670] Re: Order of operations is incorrect for exponents and parentheses

[madbiologist]

Upon further reading, it seems your third example is valid.  One must
use parentheses if the entire exponent is 2π, as in 3^(2pi), otherwise
3^2pi should evaluate to 9pi as you said.

Also from the same further reading, using your second example, if not
wanting to simply write/enter 25000*1.01^20 we should use
(25000)(1.01)^20.

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gcalctool in Ubuntu.
https://bugs.launchpad.net/bugs/1161670

Title:
  Order of operations is incorrect for exponents and parentheses

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gcalctool/+bug/1161670/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1571540] Re: Moving files nautilus extremely slow

[Nicolas_Raoul]

Similar to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1133477

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1571540

Title:
  Moving files nautilus extremely slow

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1571540/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1501250] Re: double clicking on a URL drops the protocol from the URL

[Jamie Strandboge]

FYI, this is still an issue on 16.04. The technique in comment #4
continues to work.

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1501250

Title:
  double clicking on a URL drops the protocol from the URL

To manage notifications about this bug go to:
https://bugs.launchpad.net/vte/+bug/1501250/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1161670] Re: Order of operations is incorrect for exponents and parentheses

[madbiologist]

Also see the first, second and fourth paragraphs of
https://math.berkeley.edu/~gbergman/misc/numbers/ord_ops.html

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gcalctool in Ubuntu.
https://bugs.launchpad.net/bugs/1161670

Title:
  Order of operations is incorrect for exponents and parentheses

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gcalctool/+bug/1161670/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1161670] Re: Order of operations is incorrect for exponents and parentheses

[madbiologist]

AFAIK and IIRC, parentheses are not the equivalent of a multiplication
symbol.  It is simply mathematical conventiont to omit the
multiplication symbol between two variables, between a constant and a
variable, and between a constant or variable and an operator such as (
or Σ.

Note that your first two examples are resolved if you stop using
parentheses where they are unnecessary.

The fundamental issue here is the ambiguity caused by a lack of
superscript. I've attached an example of what I'm talking about.

** Attachment added: "math.docx"
   
https://bugs.launchpad.net/ubuntu/+source/gcalctool/+bug/1161670/+attachment/4755032/+files/math.docx

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gcalctool in Ubuntu.
https://bugs.launchpad.net/bugs/1161670

Title:
  Order of operations is incorrect for exponents and parentheses

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gcalctool/+bug/1161670/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1629983] Re: Temperature in Weather Report applet impossible to read when using Ambiance

[Alberts Muktupāvels]

Dmitry, can you verify fix and upload it if it works?

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-applets in Ubuntu.
https://bugs.launchpad.net/bugs/1629983

Title:
  Temperature in Weather Report applet impossible to read when using
  Ambiance

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-applets/+bug/1629983/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1629983] Re: Temperature in Weather Report applet impossible to read when using Ambiance

[Launchpad Bug Tracker]

** Branch linked: lp:~albertsmuktupavels/ubuntu-themes/lp1629983

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-applets in Ubuntu.
https://bugs.launchpad.net/bugs/1629983

Title:
  Temperature in Weather Report applet impossible to read when using
  Ambiance

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-applets/+bug/1629983/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630560] [NEW] Popup confirms installation after cancel in password window

[Stephan Druskat]

Public bug reported:

Description:Ubuntu 16.04.1 LTS
Release:16.04

gnome-software:
  Installiert:   
3.20.1+git20160617.1.0440874.ubuntu-xenial-0ubuntu1~16.04.1
  Installationskandidat: 
3.20.1+git20160617.1.0440874.ubuntu-xenial-0ubuntu1~16.04.1
  Versionstabelle:
 *** 3.20.1+git20160617.1.0440874.ubuntu-xenial-0ubuntu1~16.04.1 500
500 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 
Packages
100 /var/lib/dpkg/status
 3.20.1+git20160420.1.ca63436.ubuntu-xenial-0ubuntu2 500
500 http://de.archive.ubuntu.com/ubuntu xenial/main amd64 Packages

Expected:
When I start installing virtualbox via gnome-software and press "Cancel" in the 
window where you enter your user password, I expect the installation to cancel 
silently.

What happened:
When I start installing virtualbox via gnome-software and press "Cancel" in the 
window where you enter your user password, a popup appears *sometimes*, 
confirming the installation of virtualbox.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: gnome-software 
3.20.1+git20160617.1.0440874.ubuntu-xenial-0ubuntu1~16.04.1
ProcVersionSignature: Ubuntu 4.4.0-38.57-generic 4.4.19
Uname: Linux 4.4.0-38-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
CurrentDesktop: Unity
Date: Wed Oct  5 14:00:06 2016
EcryptfsInUse: Yes
ExecutablePath: /usr/bin/gnome-software
InstallationDate: Installed on 2016-08-10 (56 days ago)
InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719)
ProcEnviron:
 LANGUAGE=de_DE
 PATH=(custom, user)
 XDG_RUNTIME_DIR=
 LANG=de_DE.UTF-8
 SHELL=/bin/bash
SourcePackage: gnome-software
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gnome-software (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1630560

Title:
  Popup confirms installation after cancel in password window

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1630560/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1583861] Re: Keyboard backlight isn't properly restored after idle on systems with hardwired configuration

[Amr Ibrahim]

The upower Xenial task is Fix Committed, but there is no package in 
xenial-proposed!
Is the task closed or not?

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/1583861

Title:
  Keyboard backlight isn't properly restored after idle on systems with
  hardwired configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/dell-sputnik/+bug/1583861/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630529] [NEW] Keeps asking "Do you want to continue with full Windows compatibility disabled?"

[johnmne]

Public bug reported:

I tried to burn many files that some of them weren't fully compatible
with Windows.

When tried to burn, Brasero kept asking:
"Do you want to continue with full Windows compatibility disabled?"

I clicked "Continue" but it prompts again.
The cycle repeats indefinitely.

When I click "Cancel", I realize that the DVD is already written with 
approximately 2KiB of data.
Thus the DVD is unusable...

** Affects: brasero (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to brasero in Ubuntu.
https://bugs.launchpad.net/bugs/1630529

Title:
  Keeps asking "Do you want to continue with full Windows compatibility
  disabled?"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/1630529/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1563322] Re: Can't remove or launch some apps from Software

[Alessandro Viprati]

** Tags added: yakkety

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1563322

Title:
  Can't remove or launch some apps from Software

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1563322/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1625449] Re: issue with removing apps from the store

[Alessandro Viprati]

This seems similar (if not a duplicate) to
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1563322

If you find it's the same bug, please update the description of bug
#1563322 with all the needed infos and mark this bug as duplicate of
#1563322

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1625449

Title:
  issue with removing apps from the store

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1625449/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1629600] Re: Installed application from .deb does not appear unless Ubuntu is restarted

[Alessandro Viprati]

Problem verified with Google Chrome on Yakkety.
 * install google-chrome-stable package with g-s;
 * close and restart g-s, notice that Google Chrome is not listed under 
"installed" apps nor searchable inside g-s;
 * $ pkill gnome-software;
 * start again g-s, now Google Chrome is listed in g-s.

However there is one omore problem: I can launch Google Chrome from g-s,
but I can't remove it. "Remove" button in g-s does nothing.

** Tags added: xenial

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1629600

Title:
  Installed application from .deb does not appear unless Ubuntu is
  restarted

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1629600/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1629600] Re: Installed application from .deb does not appear unless Ubuntu is restarted

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gnome-software (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1629600

Title:
  Installed application from .deb does not appear unless Ubuntu is
  restarted

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1629600/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1629600] Re: Installed application from .deb does not appear unless Ubuntu is restarted

[Alessandro Viprati]

** Tags added: yakkety

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1629600

Title:
  Installed application from .deb does not appear unless Ubuntu is
  restarted

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1629600/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1575426] Re: Gnome Software doesn't update after refreshing system repositories

[Alessandro Viprati]

Same problem on Yakkety.
Birdfont app installed with g-s, "Remove" button not shown until "pkill 
gnome-software". Then I can see birdfont in the "Installed" page, launch the 
application and remove it.

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1575426

Title:
  Gnome Software doesn't update after refreshing system repositories

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1575426/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1575426] Re: Gnome Software doesn't update after refreshing system repositories

[Alessandro Viprati]

** Tags added: yakkety

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1575426

Title:
  Gnome Software doesn't update after refreshing system repositories

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1575426/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1627157] Re: Steam is not searchable and installable

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gnome-software (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1627157

Title:
  Steam is not searchable and installable

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1627157/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1627157] Re: Steam is not searchable and installable

[Alessandro Viprati]

** Tags added: yakkety

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1627157

Title:
  Steam is not searchable and installable

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1627157/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1622379] Re: SRU: sin(0)/sin(0) crash the the calculator

[Martin Pitt]

Hello Cledersonbc, or anyone else affected,

Accepted gnome-calculator into xenial-proposed. The package will build
now and be available at https://launchpad.net/ubuntu/+source/gnome-
calculator/1:3.18.3-0ubuntu1.16.04.1 in a few hours, and then in the
-proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed.  Your feedback will aid us getting this update
out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested, and change the tag
from verification-needed to verification-done. If it does not fix the
bug for you, please add a comment stating that, and change the tag to
verification-failed.  In either case, details of your testing will help
us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: gnome-calculator (Ubuntu Xenial)
   Status: In Progress => Fix Committed

** Tags added: verification-needed

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-calculator in Ubuntu.
https://bugs.launchpad.net/bugs/1622379

Title:
  SRU: sin(0)/sin(0) crash the the calculator

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-calculator/+bug/1622379/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1554878] Re: fix up usage of XDG_CURRENT_DESKTOP

[Launchpad Bug Tracker]

This bug was fixed in the package unity-control-center -
15.04.0+16.10.20161003.1-0ubuntu1

---
unity-control-center (15.04.0+16.10.20161003.1-0ubuntu1) yakkety; urgency=medium

  [ Robert Ancell ]
  * Don't check if we're running under Unity - we only support Unity
(LP: #1554878, #1629668)
  * Ubuntu only supports usernames with lowercase letters. (LP:
#1600638)

  [ Sebastien Bacher ]
  * Revert the change from r12750 to include only graphical sessions.
(LP: #1380364)

  [ w...@whizzy.org ]
  * Removed "when battery is critical" functionality from the power
panel as this is now handled by Upower and these settings now do
nothing.  Fixes LP: #1599264 (LP: #1599264)

 -- i...@orangesquash.org.uk (i...@orangesquash.org.uk)  Mon, 03 Oct
2016 11:19:09 +

** Changed in: unity-control-center (Ubuntu)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to empathy in Ubuntu.
https://bugs.launchpad.net/bugs/1554878

Title:
  fix up usage of XDG_CURRENT_DESKTOP

To manage notifications about this bug go to:
https://bugs.launchpad.net/glib/+bug/1554878/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630349] Re: libwebp ftbfs on armhf

[Launchpad Bug Tracker]

This bug was fixed in the package libwebp - 0.5.1-2ubuntu1

---
libwebp (0.5.1-2ubuntu1) yakkety; urgency=medium

  * debian/patches/armhf_update_neon_support.patch: configure: do not
rely on arm_neon.h for neon detection.  Closes LP: #1630349.

 -- Nishanth Aravamudan   Tue, 04 Oct
2016 11:45:56 -0700

** Changed in: libwebp (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to libwebp in Ubuntu.
https://bugs.launchpad.net/bugs/1630349

Title:
  libwebp ftbfs on armhf

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libwebp/+bug/1630349/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1591356] Re: keyboard autorepeat in Xmir apps & GTK-on-Mir does not work

[Launchpad Bug Tracker]

This bug was fixed in the package xorg-server - 2:1.18.4-0ubuntu0.1

---
xorg-server (2:1.18.4-0ubuntu0.1) xenial; urgency=medium

  * New upstream bugfix release. (LP: #1619142)
  * randr-adjust-masters-last-set-time.diff,
randr-do-not-check-the-screen-size.diff:
Fix issues changing display mode on prime setups. (LP: #1586260)
  * os-treat-ssh-as-a-non-local-client.diff: Dropped, upstream.
  * drm_device_keep_trying.patch: Dropped, shouldn't be needed anymore,
and causes issues on non-x86 archs. (LP: #1581076)
  * debian/patches/xmir.patch: backport XMir fixes from Ubuntu "Yakkety Yak"
- fix button/menu focus failures (lp: #1590553)
- ignore 'unnkown 11 event' (lp: #1617925)
- don't call epoxy every frame (lp: #1617932)
- fix unclickable parts of the screen after rotation (lp: #1613708)
- fix key repeat issues (lp: #1591356)

 -- Timo Aaltonen   Thu, 01 Sep 2016 10:28:26 +0300

** Changed in: xorg-server (Ubuntu Xenial)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1591356

Title:
  keyboard autorepeat in Xmir apps & GTK-on-Mir does not work

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1591356/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1630455] [NEW] rhythmbox crashes soon after being start in Ubuntu 16.04.1 with rhythmdb_entry_get_entry_type: assertion 'entry != NULL' failed

[Roman Puchkovskiy]

Public bug reported:

For a few years, I used Ubuntu 12.04. I used rhythmbox in it all these
years, it worked fine. Some library was collected.

Then I upgraded to 14.04, and to 16.04 right away.

$ cat /etc/lsb-release 
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.1 LTS"

After I start rhythmbox, in a few seconds it crashes, even if I do
nothing. Here is the output:

(rhythmbox:22810): Gtk-WARNING **: Duplicate child name in GtkStack: Add
to Playlist


(rhythmbox:22810): Gtk-WARNING **: Duplicate child name in GtkStack: Add to 
Playlist


(rhythmbox:22810): Gtk-WARNING **: Duplicate child name in GtkStack: Add to 
Playlist


(rhythmbox:22810): Gtk-WARNING **: Duplicate child name in GtkStack: Add to 
Playlist


(rhythmbox:22810): Gtk-WARNING **: Duplicate child name in GtkStack: Add to 
Playlist


(rhythmbox:22810): Gtk-WARNING **: Duplicate child name in GtkStack: Add to 
Playlist


(rhythmbox:22810): Gtk-WARNING **: Duplicate child name in GtkStack: Add to 
Playlist


(rhythmbox:22810): Gtk-WARNING **: Duplicate child name in GtkStack: Add to 
Playlist


(rhythmbox:22810): RhythmDB-CRITICAL **: rhythmdb_entry_get_entry_type: 
assertion 'entry != NULL' failed
Ошибка сегментирования (сделан дамп памяти)


rhythmbox version is 3.3-1ubuntu7.

I'm filing this bug here by hand because aport does not see these
crashes for some reason.

** Affects: rhythmbox (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/1630455

Title:
  rhythmbox crashes soon after being start in Ubuntu 16.04.1 with
  rhythmdb_entry_get_entry_type: assertion 'entry != NULL' failed

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1630455/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs