[Bug 1717471] Re: networkd does not accept / set advertised mtu

2018-03-21 Thread Launchpad Bug Tracker 
This bug was fixed in the package systemd - 229-4ubuntu21.2

---
systemd (229-4ubuntu21.2) xenial; urgency=medium

  [ Dimitri John Ledkov ]
  * udev: Mark ndb devices as inactive until connected. (LP: #696435)
  * networkd: in dhcp, change UseMTU default to true, to accept DHCP provided 
MTU by default.
(LP: #1717471)
  * sysctl: apply parameters in-order, instead of randomly. (LP: #1718444)
  * networkd: apply promote_secondaries, to make DHCP lease changes work.
(LP: #1721223)
  * shutdown: sync filesystems, before going into a killing spree.
(LP: #1722481)
  * sysctl: do not fail, when cannot apply sysctl changes due to read-only 
sysfs in containers.
(LP: #1734409)
  * networkd,wait-online: add RequiredForOnline to mark mandatory/optional 
links for boot.
(LP: #1737570)

  [ David Glasser ]
  * journald: don't reduce BurstRateLimit on low disk space (LP: #1732803)

 -- Dimitri John Ledkov   Wed, 21 Feb 2018 13:46:37
+

** Changed in: systemd (Ubuntu Xenial)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1717471

Title:
  networkd does not accept / set advertised mtu

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1717471/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1717471] Re: networkd does not accept / set advertised mtu

2018-01-09 Thread Launchpad Bug Tracker 
This bug was fixed in the package nplan - 0.32~17.04.1

---
nplan (0.32~17.04.1) zesty; urgency=medium

  * Backport 0.32 to 17.04. (LP: #1713142)

nplan (0.32) bionic; urgency=medium

  * src/nm.c: better handle the UUID generation; the order of iterating
through interaces may affect things here. Also make sure the tests catch
a null UUID.

nplan (0.31) bionic; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * src/nm.c: generate a UUID for a connection only as needed; when we're
dealing with NM VLANs. (LP: #1712921)
  * debian/tests/autostart: Make the autostart test more verbose and avoid
failing right from the start when systemd-networkd is disabled.
(LP: #1699371)
  * tests/integration.py: bump the NetworkManager timeout for settling to
120 seconds, autopkgtest infrastructure tends to be a little slow for the
network device configuration to be applied and noticed by NM.
(LP: #1699371)

  [ Dimitri John Ledkov ]
  * Reload udevd to invalidate configuration cache of .rules/.link files
as generate step may have changed them. LP: #1669564

  [ Dan Streetman ]
  * Add another interface driver exception to netplan replug to prevent unbind
of the Xen VIF interfaces. (LP: #1729573)

nplan (0.30) artful; urgency=medium

  * Add an "optional" syntax node for now to all devices. This is unimplemented
for now, but intended to allow users to mark some devices as optional: to
make sure they do not delay boot when configured. (LP: #1664844)

nplan (0.29) artful; urgency=medium

  * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
exists. nplan is enabled by default, so it might well have the directory
already created on the filesystem.

nplan (0.28) artful; urgency=medium

  * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
broke default network config in LXD and was contrary to the defaults used
by the kernel. Reopens LP: 1655440. (LP: #1717404)
  * Add "accept-ra:" key for all device types; this will default to OFF but
allow users to disable processing Router Advertisements when required by
their network setup. (LP: #1655440)

nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
(LP: #1717471)
  * tests/integration.py: fix resolved detection.

nplan (0.26) artful; urgency=medium

  * Bonding:
- Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
- Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
  rebind. (LP: #1712224)
  * Autopkgtests:
- Add allow-stderr. Systemd now bleats about a the networkd socket still
  being around and enabled when we restart the service; but we don't need
  to care since we're /restarting/ the service to load the new config.
- Fix the autostart package to be more sensible: we don't really care if
  networkd autostarts or not, but we need to make sure that our generator
  will run at boot, so instead check the state, but only assert it once
  we've added a config file and before checking the state of our dummy
  device.
- Do a bit more to make sure "mix" tests which stack virtual devices are
  as reliable as possible; by setting saner defaults.

nplan (0.25) artful; urgency=medium

  * tests/generate.py: add a test to validate that correct blacklist entries
are added when creating virtual devices.
  * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
the remaining interface and udev configuration can confuse NetworkManager
now that it seems to manage random devices it did not create again.
(LP: #1699371)
  * src/nm.c: set the MTU even though we also specify it in systemd-networkd
for consumption by udev. NetworkManager will try to set it and might
otherwise default to the wrong value.
  * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
same config, SLAAC), and don't have static addresses set. This should fix
the cases where unconfigured devices still get an IPv6 address.
(LP: #1655440)
  * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
configured; this follows the same logic as setting IPv6AcceptRA=no in
networkd, with the exception that NM does not currently disable RAs. When
it does, an unconfigured device for IPv6 will truly be left with no config.

nplan (0.24) artful; urgency=medium

  * debian/control: set Priority to important to make sure we can get into
minimal.

 -- Mathieu Trudel-Lapierre   Thu, 16 Nov 2017
10:43:28 -0500

** Changed in: nplan (Ubuntu Zesty)
   Status: Fix

[Bug 1717471] Re: networkd does not accept / set advertised mtu

2018-01-09 Thread Launchpad Bug Tracker 
This bug was fixed in the package nplan - 0.32~16.04.3

---
nplan (0.32~16.04.3) xenial; urgency=medium

  * tests/integration.py: Really fix skipping test_routes_v6 for the NM
backend.

nplan (0.32~16.04.2) xenial; urgency=medium

  * tests/integration.py: Fix test_routes_v6 that I clobbered when I re-applied
the skip rules for 16.04 after merging in 0.32.

nplan (0.32~16.04.1) xenial; urgency=medium

  * Backport netplan 0.32 to 16.04. (LP: #1713142)
  * debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
feature backported in that revision.
  * tests/integration.py: Skip tests that are still not yet supported in xenial

nplan (0.32) bionic; urgency=medium

  * src/nm.c: better handle the UUID generation; the order of iterating
through interaces may affect things here. Also make sure the tests catch
a null UUID.

nplan (0.31) bionic; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * src/nm.c: generate a UUID for a connection only as needed; when we're
dealing with NM VLANs. (LP: #1712921)
  * debian/tests/autostart: Make the autostart test more verbose and avoid
failing right from the start when systemd-networkd is disabled.
(LP: #1699371)
  * tests/integration.py: bump the NetworkManager timeout for settling to
120 seconds, autopkgtest infrastructure tends to be a little slow for the
network device configuration to be applied and noticed by NM.
(LP: #1699371)

  [ Dimitri John Ledkov ]
  * Reload udevd to invalidate configuration cache of .rules/.link files
as generate step may have changed them. LP: #1669564

  [ Dan Streetman ]
  * Add another interface driver exception to netplan replug to prevent unbind
of the Xen VIF interfaces. (LP: #1729573)

nplan (0.30) artful; urgency=medium

  * Add an "optional" syntax node for now to all devices. This is unimplemented
for now, but intended to allow users to mark some devices as optional: to
make sure they do not delay boot when configured. (LP: #1664844)

nplan (0.29) artful; urgency=medium

  * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
exists. nplan is enabled by default, so it might well have the directory
already created on the filesystem.

nplan (0.28) artful; urgency=medium

  * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
broke default network config in LXD and was contrary to the defaults used
by the kernel. Reopens LP: 1655440. (LP: #1717404)
  * Add "accept-ra:" key for all device types; this will default to OFF but
allow users to disable processing Router Advertisements when required by
their network setup. (LP: #1655440)

nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
(LP: #1717471)
  * tests/integration.py: fix resolved detection.

nplan (0.26) artful; urgency=medium

  * Bonding:
- Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
- Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
  rebind. (LP: #1712224)
  * Autopkgtests:
- Add allow-stderr. Systemd now bleats about a the networkd socket still
  being around and enabled when we restart the service; but we don't need
  to care since we're /restarting/ the service to load the new config.
- Fix the autostart package to be more sensible: we don't really care if
  networkd autostarts or not, but we need to make sure that our generator
  will run at boot, so instead check the state, but only assert it once
  we've added a config file and before checking the state of our dummy
  device.
- Do a bit more to make sure "mix" tests which stack virtual devices are
  as reliable as possible; by setting saner defaults.

nplan (0.25) artful; urgency=medium

  * tests/generate.py: add a test to validate that correct blacklist entries
are added when creating virtual devices.
  * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
the remaining interface and udev configuration can confuse NetworkManager
now that it seems to manage random devices it did not create again.
(LP: #1699371)
  * src/nm.c: set the MTU even though we also specify it in systemd-networkd
for consumption by udev. NetworkManager will try to set it and might
otherwise default to the wrong value.
  * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
same config, SLAAC), and don't have static addresses set. This should fix
the cases where unconfigured devices still get an IPv6 address.
(LP: #1655440)
  * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is

[Bug 1717471] Re: networkd does not accept / set advertised mtu

2017-10-06 Thread Launchpad Bug Tracker 
This bug was fixed in the package systemd - 234-2ubuntu12

---
systemd (234-2ubuntu12) artful; urgency=medium

  [ Dimitri John Ledkov ]
  * debian/rules: do not strip test-copy.
This insures test-copy is large enough for test-copy tests to pass.
(LP: #1721203)

  [ Michael Biebl ]
  * Drop systemd-timesyncd.service.d/disable-with-time-daemon.conf.
All major NTP implementations ship a native service file nowadays with a
Conflicts=systemd-timesyncd.service so this drop-in is no longer
necessary. (Closes: #873185) (LP: #1721204)

 -- Dimitri John Ledkov   Wed, 04 Oct 2017 13:28:34
+0100

** Changed in: systemd (Ubuntu)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1717471

Title:
  networkd does not accept / set advertised mtu

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1717471/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1717471] Re: networkd does not accept / set advertised mtu

2017-09-26 Thread Mathieu Trudel-Lapierre 
** Also affects: systemd (Ubuntu Xenial)
   Importance: Undecided
   Status: New

** Also affects: nplan (Ubuntu Xenial)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1717471

Title:
  networkd does not accept / set advertised mtu

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1717471/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1717471] Re: networkd does not accept / set advertised mtu

2017-09-15 Thread Launchpad Bug Tracker 
This bug was fixed in the package nplan - 0.27

---
nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
(LP: #1717471)
  * tests/integration.py: fix resolved detection.

 -- Dimitri John Ledkov   Fri, 15 Sep 2017 14:25:22
+0100

** Changed in: nplan (Ubuntu)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1717471

Title:
  networkd does not accept / set advertised mtu

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1717471/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1717471] Re: networkd does not accept / set advertised mtu

2017-09-15 Thread Dimitri John Ledkov 
 netplan needs to set DHCP.UseMTU=yes
 If I do that, my local instance no longer behaves strangely, and the 
MTU is correctly 1458

** Also affects: nplan (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1717471

Title:
  networkd does not accept / set advertised mtu

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1717471/+subscriptions

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs