[Desktop-packages] [Bug 1431179] Re: usb_modeswitch@.service fails sometimes
@OdyX, do you know what's going on here? I'm afraid I'm not familiar with usb-modeswitch at all.. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to usb-modeswitch in Ubuntu. https://bugs.launchpad.net/bugs/1431179 Title: usb_modeswitch@.service fails sometimes Status in usb-modeswitch package in Ubuntu: Incomplete Bug description: I lack the technical knowledge to know if this is a bug in udev, systemd or another component. After the switch to systemd, my 4G Huawei USB modem no longer functions as a modem unless I run usb_modeswitch to flip its state from USB mass storage. The command I issue and its output is below, which also show the Vendor and Product ID. Strangely, it does not do this every time. Yesterday when I updated using apt-get dist-upgrade upon reboot the modem worked as expected. But from a cold boot this morning it did not. $ sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -J [sudo] password for damon: Look for default devices ... product ID matched Found devices in default mode (1) Access device 003 on bus 003 Current configuration number is 1 Use interface number 0 Use endpoints 0x01 (out) and 0x81 (in) USB description data (for identification) - Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: - Using standard Huawei switching message Looking for active driver ... OK, driver detached Set up interface 0 Use endpoint 0x01 for message sending ... Trying to send message 1 to endpoint 0x01 ... OK, message successfully sent Reset response endpoint 0x81 Could not reset endpoint (probably harmless): -99 Reset message endpoint 0x01 Could not reset endpoint (probably harmless): -99 Device is gone, skip any further commands - Run lsusb to note any changes. Bye! ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: udev 219-4ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-8.8-generic 3.19.1 Uname: Linux 3.19.0-8-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity CustomUdevRuleFiles: 60-ssd-scheduler.rules Date: Thu Mar 12 11:37:06 2015 InstallationDate: Installed on 2015-02-05 (34 days ago) InstallationMedia: Kubuntu 15.04 Vivid Vervet - Alpha amd64 (20150205) MachineType: LENOVO 427637U ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-8-generic root=UUID=eb18ef51-a2d0-4372-8eb9-ae009a05d4f6 ro quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/26/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 8BET62WW (1.42 ) dmi.board.asset.tag: Not Available dmi.board.name: 427637U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8BET62WW(1.42):bd07/26/2013:svnLENOVO:pn427637U:pvrThinkPadW520:rvnLENOVO:rn427637U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 427637U dmi.product.version: ThinkPad W520 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/usb-modeswitch/+bug/1431179/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 572500] Re: retracer should remove architecture specific tag
Removing the tags seems kind of dumb now. ** Changed in: apport (Ubuntu) Status: New = Won't Fix -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/572500 Title: retracer should remove architecture specific tag Status in apport package in Ubuntu: Won't Fix Bug description: Binary package hint: apport I believe that the tags i386, amd64 et al were designed to identify bug reports that may be specific to a particular architecture. It seems to me that if the retracer marks a bug tagged i386 as a duplicate of a bug tagged armel that the crash is not architecture specific. In which case it'd be helpful for the retracer to remove the architecture tag from the duplicate and the master. As an example one could look at bug 571950 and the bug it is a duplicate of bug 570804 - which I already removed the armel tag from. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/572500/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431179] Re: USB 4G modem detected as USB mass storage
$ systemctl status -l usb_modeswitch@-3-1.2:1.0.service ● usb_modeswitch@-3-1.2:1.0.service - USB_ModeSwitch Loaded: loaded (/lib/systemd/system/usb_modeswitch@.service; static; vendor preset: enabled) Active: failed (Result: exit-code) since Thu 2015-03-12 12:34:56 TJT; 1min 5s ago Process: 892 ExecStart=/usr/sbin/usb_modeswitch_dispatcher --switch-systemd %I (code=exited, status=1/FAILURE) Main PID: 892 (code=exited, status=1/FAILURE) Mar 12 12:34:56 damon-W520 systemd[1]: Starting USB_ModeSwitch... Mar 12 12:34:56 damon-W520 systemd[1]: usb_modeswitch@-3-1.2:1.0.service: main process exited, code=exited, status=1/FAILURE Mar 12 12:34:56 damon-W520 systemd[1]: Failed to start USB_ModeSwitch. Mar 12 12:34:56 damon-W520 systemd[1]: Unit usb_modeswitch@-3-1.2:1.0.service entered failed state. Mar 12 12:34:56 damon-W520 systemd[1]: usb_modeswitch@-3-1.2:1.0.service failed. ** Attachment added: Requested udev output before manual modem start https://bugs.launchpad.net/ubuntu/+source/usb-modeswitch/+bug/1431179/+attachment/4342361/+files/udev.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to usb-modeswitch in Ubuntu. https://bugs.launchpad.net/bugs/1431179 Title: USB 4G modem detected as USB mass storage Status in usb-modeswitch package in Ubuntu: Incomplete Bug description: I lack the technical knowledge to know if this is a bug in udev, systemd or another component. After the switch to systemd, my 4G Huawei USB modem no longer functions as a modem unless I run usb_modeswitch to flip its state from USB mass storage. The command I issue and its output is below, which also show the Vendor and Product ID. Strangely, it does not do this every time. Yesterday when I updated using apt-get dist-upgrade upon reboot the modem worked as expected. But from a cold boot this morning it did not. $ sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -J [sudo] password for damon: Look for default devices ... product ID matched Found devices in default mode (1) Access device 003 on bus 003 Current configuration number is 1 Use interface number 0 Use endpoints 0x01 (out) and 0x81 (in) USB description data (for identification) - Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: - Using standard Huawei switching message Looking for active driver ... OK, driver detached Set up interface 0 Use endpoint 0x01 for message sending ... Trying to send message 1 to endpoint 0x01 ... OK, message successfully sent Reset response endpoint 0x81 Could not reset endpoint (probably harmless): -99 Reset message endpoint 0x01 Could not reset endpoint (probably harmless): -99 Device is gone, skip any further commands - Run lsusb to note any changes. Bye! ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: udev 219-4ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-8.8-generic 3.19.1 Uname: Linux 3.19.0-8-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity CustomUdevRuleFiles: 60-ssd-scheduler.rules Date: Thu Mar 12 11:37:06 2015 InstallationDate: Installed on 2015-02-05 (34 days ago) InstallationMedia: Kubuntu 15.04 Vivid Vervet - Alpha amd64 (20150205) MachineType: LENOVO 427637U ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-8-generic root=UUID=eb18ef51-a2d0-4372-8eb9-ae009a05d4f6 ro quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/26/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 8BET62WW (1.42 ) dmi.board.asset.tag: Not Available dmi.board.name: 427637U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8BET62WW(1.42):bd07/26/2013:svnLENOVO:pn427637U:pvrThinkPadW520:rvnLENOVO:rn427637U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 427637U dmi.product.version: ThinkPad W520 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/usb-modeswitch/+bug/1431179/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1224756] Re: Pulseaudio should integrate with trust-store
** Changed in: canonical-devices-system-image Assignee: Michael Frey (mfrey) = Canonical Phone Foundations (canonical-phonedations-team) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1224756 Title: Pulseaudio should integrate with trust-store Status in the base for Ubuntu mobile products: Confirmed Status in pulseaudio package in Ubuntu: Triaged Bug description: Currently the 'audio' policy group allows access to pulseaudio which allows apps to use the microphone and eavesdrop on the user. Pulseaudio needs to be modified to use trust-store, like location- service does. Integrating with trust-store means that when an app tries use the microphone via pulseaudio, pulseaudio will contact trust-store, the trust-store will prompt the user (Foo wants to use the microphone. Is this ok? Yes|No), optionally cache the result and return the result to pulseaudio. In this manner the user is given a contextual prompt at the time of access by the app. Using caching this decision can be remembered the next time. If caching is used, there should be a method to change the decision in settings. Targeting to T-Series for now, since the trust-store is not in a reusable form yet. Original description: David and the security team (inspired by an observation from Rick) discussed that when recording, pulseaudio should somehow unobtrusively show the user that it is recording. The easiest thing to do would be for pulseaudio to alert indicator-sound which would then turn its icon red (similar to indicator-message turning blue with new messages). Marking 'high' because apps with access to pulseaudio can currently eavedrop on users. If the app is allowed to do networking (the default for apps), then it can ship that information off to a server somewhere. Note 1, the alert to indicator-sound must happen via the out of process pulseaudio server and not the confined app itself to be effective. Note 2, we should consider how to enforce this for foreground apps only. Application lifecycle should probably handle this for 13.10 (apps are suspended if not in foreground or if the screensaver is on), but we don't want an app on the converged device to record in the background when the user isn't paying attention. Example eavesdropping attack: start recording only when the screensaver is on (perhaps inhibiting the screensaver during recording would be enough). To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1224756/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430514] [NEW] as soon as I boot up, it says system has crashed
Public bug reported: not much else I can say. It also happened when I still had 14.10. Now it still happens. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: unity-greeter 15.04.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0 Uname: Linux 3.19.0-7-generic i686 ApportVersion: 2.16.2-0ubuntu2 Architecture: i386 Date: Fri Mar 6 18:48:29 2015 ExecutablePath: /usr/sbin/unity-greeter InstallationDate: Installed on 2013-05-09 (670 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424) ProcCmdline: /usr/sbin/unity-greeter ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/false SourcePackage: unity-greeter UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: unity-greeter (Ubuntu) Importance: Undecided Status: New ** Tags: apport-crash i386 vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-greeter in Ubuntu. https://bugs.launchpad.net/bugs/1430514 Title: as soon as I boot up, it says system has crashed Status in unity-greeter package in Ubuntu: New Bug description: not much else I can say. It also happened when I still had 14.10. Now it still happens. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: unity-greeter 15.04.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0 Uname: Linux 3.19.0-7-generic i686 ApportVersion: 2.16.2-0ubuntu2 Architecture: i386 Date: Fri Mar 6 18:48:29 2015 ExecutablePath: /usr/sbin/unity-greeter InstallationDate: Installed on 2013-05-09 (670 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424) ProcCmdline: /usr/sbin/unity-greeter ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/false SourcePackage: unity-greeter UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-greeter/+bug/1430514/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 958345] Re: ttf-indic-fonts packages are outdated
Happy to see someone working on this Bug . Thanks Robert-Ancell . -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/958345 Title: ttf-indic-fonts packages are outdated Status in libreoffice package in Ubuntu: New Status in ttf-indic-fonts package in Ubuntu: Confirmed Bug description: The Debian fonts team recently restructured the indic fonts. ttf-indic-fonts changed to fonts-indic. This is meta package and all packages ttf-[language]-fonts renamed to fonts-[script/foundry]. In addition to this all fonts were updated to latest versions from upstreams. I request ubuntu maintainers to update the fonts to latest versions and consider following the debian package naming changes for fonts. Refer: http://packages.debian.org/sid/fonts-indic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/958345/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430230] Re: Log flooding with warning message when using linux-lowlatency kernel
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: xserver-xorg-video-intel (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1430230 Title: Log flooding with warning message when using linux-lowlatency kernel Status in xserver-xorg-video-intel package in Ubuntu: Confirmed Bug description: In Vivid, when booting with lowlatency kernel (and possibly with generic kernel and threadirqs), Intel graphics driver will flood the logs with warning: Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247652] [ cut here ] Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247683] WARNING: CPU: 3 PID: 659 at /build/buildd/linux-3.19.0/drivers/gpu/drm/i915/intel_display.c:9705 intel_check_page_flip+0xa2/0xf0 [i915]() Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247685] WARN_ON(!in_irq()) Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247686] Modules linked in: md4 nls_utf8 cifs fscache msr acpi_call(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 bridge stp llc ebtable_filter ebtables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) binfmt_misc rfcomm bnep nls_iso8859_1 hid_apple intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel uvcvideo kvm videobuf2_vmalloc videobuf2_memops crct10dif_pclmul i915 videobuf2_core crc32_pclmul ghash_clmulni_intel v4l2_common videodev aesni_intel media aes_x86_64 btusb lrw gf128mul glue_helper bluetooth ablk_helper cryptd arc4 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iwldvm dm_multipath scsi_dh snd_hda_intel mac80211 snd_hda_controller snd_hda_codec joydev snd_hwdep serio_raw drm_kms_helper iwlwifi snd_pcm thinkpad_acpi cfg80211 snd_seq_midi snd_seq_midi_event nvram snd_rawmidi snd_seq ip6t_REJECT nf_reject_ipv6 snd_seq_de vice nf_log_ipv6 lpc_ich snd_timer drm shpchp xt_hl snd mei_me nf_conntrack_ipv6 mei nf_defrag_ipv6 i2c_algo_bit ip6t_rt soundcore wmi video mac_hid ipt_REJECT nf_reject_ipv4 nf_log_ipv4 nf_log_common xt_LOG xt_multiport xt_limit xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_addrtype xt_conntrack ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast cuse nf_nat_ftp nf_nat nf_conntrack_ftp parport_pc nf_conntrack ppdev iptable_filter ip_tables lp x_tables parport autofs4 btrfs xor raid6_pq hid_generic usbhid hid psmouse ahci e1000e sdhci_pci libahci sdhci ptp pps_core Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247768] CPU: 3 PID: 659 Comm: irq/32-i915 Tainted: GW OE 3.19.0-7-lowlatency #7-Ubuntu Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247770] Hardware name: LENOVO 2353CTO/2353CTO, BIOS G7ETA0WW (2.60 ) 05/14/2014 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247781] c0be7010 88042a353c98 817c5402 88043e2cfd78 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247784] 88042a353ce8 88042a353cd8 8107738a 88042a353cd8 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247786] 880428f3f000 880428f5e800 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247788] Call Trace: Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247795] [817c5402] dump_stack+0x4c/0x6e Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247805] [8107738a] warn_slowpath_common+0x8a/0xc0 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247814] [81077406] warn_slowpath_fmt+0x46/0x50 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247830] [c0b92482] intel_check_page_flip+0xa2/0xf0 [i915] Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247843] [c0b5f4d8] ironlake_irq_handler+0x428/0x1010 [i915] Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247847] [8109b55d] ? finish_task_switch+0x5d/0x100 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247854] [810cfc60] ? irq_thread_fn+0x50/0x50 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247858] [810cfc8d] irq_forced_thread_fn+0x2d/0x70 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247861] [810d01af] irq_thread+0x11f/0x150 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247865] [810cfd00] ? wake_threads_waitq+0x30/0x30 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247868] [810d0090] ? irq_thread_check_affinity+0x90/0x90 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247871] [81095bc9] kthread+0xc9/0xe0 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247874] [81095b00] ? kthread_create_on_node+0x1c0/0x1c0 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247877] [817cc33c]
[Desktop-packages] [Bug 1430230] Re: Log flooding with warning message when using linux-lowlatency kernel
I have this exact same problem. My computer logs : WARNING: CPU: 3 PID: 659 at /build/buildd/linux-3.19.0/drivers/gpu/drm/i915/intel_display.c:9705 intel_check_page_flip+0xa2/0xf0 [i915]() WARN_ON(!in_irq()) continually with the 3.19.0-7 and 3.19.0-8 kernels in the -lowlatency kind. It occurs sometime while resuming from pause in the -generic kind of kernel. I concur : https://bugs.freedesktop.org/show_bug.cgi?id=89321 seems to have the answer. Even a patch there. ** Bug watch added: freedesktop.org Bugzilla #89321 https://bugs.freedesktop.org/show_bug.cgi?id=89321 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1430230 Title: Log flooding with warning message when using linux-lowlatency kernel Status in xserver-xorg-video-intel package in Ubuntu: Confirmed Bug description: In Vivid, when booting with lowlatency kernel (and possibly with generic kernel and threadirqs), Intel graphics driver will flood the logs with warning: Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247652] [ cut here ] Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247683] WARNING: CPU: 3 PID: 659 at /build/buildd/linux-3.19.0/drivers/gpu/drm/i915/intel_display.c:9705 intel_check_page_flip+0xa2/0xf0 [i915]() Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247685] WARN_ON(!in_irq()) Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247686] Modules linked in: md4 nls_utf8 cifs fscache msr acpi_call(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 bridge stp llc ebtable_filter ebtables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) binfmt_misc rfcomm bnep nls_iso8859_1 hid_apple intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel uvcvideo kvm videobuf2_vmalloc videobuf2_memops crct10dif_pclmul i915 videobuf2_core crc32_pclmul ghash_clmulni_intel v4l2_common videodev aesni_intel media aes_x86_64 btusb lrw gf128mul glue_helper bluetooth ablk_helper cryptd arc4 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iwldvm dm_multipath scsi_dh snd_hda_intel mac80211 snd_hda_controller snd_hda_codec joydev snd_hwdep serio_raw drm_kms_helper iwlwifi snd_pcm thinkpad_acpi cfg80211 snd_seq_midi snd_seq_midi_event nvram snd_rawmidi snd_seq ip6t_REJECT nf_reject_ipv6 snd_seq_de vice nf_log_ipv6 lpc_ich snd_timer drm shpchp xt_hl snd mei_me nf_conntrack_ipv6 mei nf_defrag_ipv6 i2c_algo_bit ip6t_rt soundcore wmi video mac_hid ipt_REJECT nf_reject_ipv4 nf_log_ipv4 nf_log_common xt_LOG xt_multiport xt_limit xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_addrtype xt_conntrack ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast cuse nf_nat_ftp nf_nat nf_conntrack_ftp parport_pc nf_conntrack ppdev iptable_filter ip_tables lp x_tables parport autofs4 btrfs xor raid6_pq hid_generic usbhid hid psmouse ahci e1000e sdhci_pci libahci sdhci ptp pps_core Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247768] CPU: 3 PID: 659 Comm: irq/32-i915 Tainted: GW OE 3.19.0-7-lowlatency #7-Ubuntu Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247770] Hardware name: LENOVO 2353CTO/2353CTO, BIOS G7ETA0WW (2.60 ) 05/14/2014 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247781] c0be7010 88042a353c98 817c5402 88043e2cfd78 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247784] 88042a353ce8 88042a353cd8 8107738a 88042a353cd8 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247786] 880428f3f000 880428f5e800 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247788] Call Trace: Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247795] [817c5402] dump_stack+0x4c/0x6e Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247805] [8107738a] warn_slowpath_common+0x8a/0xc0 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247814] [81077406] warn_slowpath_fmt+0x46/0x50 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247830] [c0b92482] intel_check_page_flip+0xa2/0xf0 [i915] Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247843] [c0b5f4d8] ironlake_irq_handler+0x428/0x1010 [i915] Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247847] [8109b55d] ? finish_task_switch+0x5d/0x100 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247854] [810cfc60] ? irq_thread_fn+0x50/0x50 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247858] [810cfc8d] irq_forced_thread_fn+0x2d/0x70 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247861] [810d01af] irq_thread+0x11f/0x150 Mar 10 09:35:43 franck-ThinkPad-T430s kernel: [ 2216.247865] [810cfd00] ?
[Desktop-packages] [Bug 1425972] Re: Firefox no longer supports -remote parameter
** Project changed: hundredpapercuts = python
** Changed in: python
Importance: Medium = Unknown
** Changed in: python
Status: Confirmed = Unknown
** Changed in: python
Remote watch: None = Python Roundup #23262
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to emacs24 in Ubuntu.
https://bugs.launchpad.net/bugs/1425972
Title:
Firefox no longer supports -remote parameter
Status in GNU Emacs:
Unknown
Status in exo:
Fix Released
Status in The Mozilla Firefox Browser:
Fix Released
Status in Python:
Unknown
Status in emacs24 package in Ubuntu:
Confirmed
Status in exo package in Ubuntu:
Confirmed
Status in firefox package in Ubuntu:
Fix Released
Status in emacs24 source package in Trusty:
Confirmed
Status in exo source package in Trusty:
Fix Committed
Status in firefox source package in Trusty:
Fix Released
Status in emacs24 source package in Utopic:
Confirmed
Status in exo source package in Utopic:
In Progress
Status in firefox source package in Utopic:
Fix Released
Status in exo package in Debian:
New
Bug description:
[Impact]
As of Firefox version 36, the -remote commandline parameter was dropped.
This parameter is used in versions of exo prior to 0.10.3. Because of this,
opening any URLs via exo-open will cause a new firefox window to launch at the
home screen.
As reported, this affects the terminal, ubuntu-bug, xchat, and
numerous other applications.
[Test Case]
1. Set Firefox as the default web browser in Preferred Applications.
2. From a terminal, type the following:
exo-open http://www.xfce.org;
Expected: Firefox opens at http://www.xfce.org
Actual: Firefox opens at the home page.
[Regression Potential]
No regressions by this change. This fixes the application call to correctly
open URLs.
---
[Original Report]
When I click a link from an email it does not work any more.
Instead of opening the link in a new tab, Firefox opens a new empty
window and does not follow the link.
If I change the default browser for my desktop from Firefox to Chrome,
then Chrome can open the link fine.
I have started seeing this today since firefox was upgraded from v35
to 36.
My email client is Mozilla thunderbird at the latest stable version.
ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: firefox 36.0+build2-0ubuntu0.14.10.4
ProcVersionSignature: Ubuntu 3.16.0-31.41-generic 3.16.7-ckt5
Uname: Linux 3.16.0-31-generic x86_64
AddonCompatCheckDisabled: False
ApportVersion: 2.14.7-0ubuntu8.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: dpottage 3729 F pulseaudio
BuildID: 20150224133805
Channel: Unavailable
CurrentDesktop: XFCE
Date: Thu Feb 26 14:30:41 2015
ForcedLayersAccel: False
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IncompatibleExtensions:
English (South Africa) Language Pack - langpack-en...@firefox.mozilla.org
English (GB) Language Pack - langpack-en...@firefox.mozilla.org
Français Language Pack - langpack...@firefox.mozilla.org
Deutsch (DE) Language Pack - langpack...@firefox.mozilla.org
Default - {972ce4c6-7e08-4474-a285-3208198ce6fd}
InstallationDate: Installed on 2013-07-02 (604 days ago)
InstallationMedia: Xubuntu 13.04 Raring Ringtail - Release amd64
(20130423.1)
IpRoute:
default via 192.168.1.254 dev eth0 proto static
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.131 metric
1
MostRecentCrashID: bp-86a16931-63d2-435e-8324-421212140304
Plugins:
Shockwave Flash - /usr/lib/flashplugin-installer/libflashplayer.so
LibreOffice Plug-in - /usr/lib/libreoffice/program/libnpsoplugin.so
(browser-plugin-libreoffice)
Java(TM) Plug-in 11.25.2 -
/usr/lib/jvm/java-8-oracle/jre/lib/amd64/libnpjp2.so
PrefSources: prefs.js
Profiles: Profile0 (Default) - LastVersion=36.0/20150224133805 (In use)
RelatedPackageVersions: browser-plugin-libreoffice 1:4.3.3-0ubuntu1
RfKill:
0: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
RunningIncompatibleAddons: True
SourcePackage: firefox
SubmittedCrashIDs: bp-86a16931-63d2-435e-8324-421212140304
UpgradeStatus: Upgraded to utopic on 2014-10-29 (119 days ago)
dmi.bios.date: 11/23/2012
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A08
dmi.board.name: 0XR1GT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvrA08:bd11/23/2012:svnDellInc.:pnVostro270:pvr:rvnDellInc.:rn0XR1GT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: Vostro 270
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/emacs/+bug/1425972/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe :
[Desktop-packages] [Bug 1425972] Re: Firefox no longer supports -remote parameter
** Also affects: emacs
Importance: Undecided
Status: New
** Changed in: emacs
Status: New = Fix Released
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to emacs24 in Ubuntu.
https://bugs.launchpad.net/bugs/1425972
Title:
Firefox no longer supports -remote parameter
Status in GNU Emacs:
Fix Released
Status in exo:
Fix Released
Status in The Mozilla Firefox Browser:
Fix Released
Status in Python:
Confirmed
Status in emacs24 package in Ubuntu:
Confirmed
Status in exo package in Ubuntu:
Confirmed
Status in firefox package in Ubuntu:
Fix Released
Status in emacs24 source package in Trusty:
Confirmed
Status in exo source package in Trusty:
Fix Committed
Status in firefox source package in Trusty:
Fix Released
Status in emacs24 source package in Utopic:
Confirmed
Status in exo source package in Utopic:
In Progress
Status in firefox source package in Utopic:
Fix Released
Status in exo package in Debian:
New
Bug description:
[Impact]
As of Firefox version 36, the -remote commandline parameter was dropped.
This parameter is used in versions of exo prior to 0.10.3. Because of this,
opening any URLs via exo-open will cause a new firefox window to launch at the
home screen.
As reported, this affects the terminal, ubuntu-bug, xchat, and
numerous other applications.
[Test Case]
1. Set Firefox as the default web browser in Preferred Applications.
2. From a terminal, type the following:
exo-open http://www.xfce.org;
Expected: Firefox opens at http://www.xfce.org
Actual: Firefox opens at the home page.
[Regression Potential]
No regressions by this change. This fixes the application call to correctly
open URLs.
---
[Original Report]
When I click a link from an email it does not work any more.
Instead of opening the link in a new tab, Firefox opens a new empty
window and does not follow the link.
If I change the default browser for my desktop from Firefox to Chrome,
then Chrome can open the link fine.
I have started seeing this today since firefox was upgraded from v35
to 36.
My email client is Mozilla thunderbird at the latest stable version.
ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: firefox 36.0+build2-0ubuntu0.14.10.4
ProcVersionSignature: Ubuntu 3.16.0-31.41-generic 3.16.7-ckt5
Uname: Linux 3.16.0-31-generic x86_64
AddonCompatCheckDisabled: False
ApportVersion: 2.14.7-0ubuntu8.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: dpottage 3729 F pulseaudio
BuildID: 20150224133805
Channel: Unavailable
CurrentDesktop: XFCE
Date: Thu Feb 26 14:30:41 2015
ForcedLayersAccel: False
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IncompatibleExtensions:
English (South Africa) Language Pack - langpack-en...@firefox.mozilla.org
English (GB) Language Pack - langpack-en...@firefox.mozilla.org
Français Language Pack - langpack...@firefox.mozilla.org
Deutsch (DE) Language Pack - langpack...@firefox.mozilla.org
Default - {972ce4c6-7e08-4474-a285-3208198ce6fd}
InstallationDate: Installed on 2013-07-02 (604 days ago)
InstallationMedia: Xubuntu 13.04 Raring Ringtail - Release amd64
(20130423.1)
IpRoute:
default via 192.168.1.254 dev eth0 proto static
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.131 metric
1
MostRecentCrashID: bp-86a16931-63d2-435e-8324-421212140304
Plugins:
Shockwave Flash - /usr/lib/flashplugin-installer/libflashplayer.so
LibreOffice Plug-in - /usr/lib/libreoffice/program/libnpsoplugin.so
(browser-plugin-libreoffice)
Java(TM) Plug-in 11.25.2 -
/usr/lib/jvm/java-8-oracle/jre/lib/amd64/libnpjp2.so
PrefSources: prefs.js
Profiles: Profile0 (Default) - LastVersion=36.0/20150224133805 (In use)
RelatedPackageVersions: browser-plugin-libreoffice 1:4.3.3-0ubuntu1
RfKill:
0: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
RunningIncompatibleAddons: True
SourcePackage: firefox
SubmittedCrashIDs: bp-86a16931-63d2-435e-8324-421212140304
UpgradeStatus: Upgraded to utopic on 2014-10-29 (119 days ago)
dmi.bios.date: 11/23/2012
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A08
dmi.board.name: 0XR1GT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvrA08:bd11/23/2012:svnDellInc.:pnVostro270:pvr:rvnDellInc.:rn0XR1GT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: Vostro 270
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/emacs/+bug/1425972/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1404468] Re: German neo2 keyboard layout: no ALT and SUPER keys
Actually this seems to affect every key that is not handled directly to the target application, but indirectly (through the window-manager?), e.g. also media buttons when the associated media application window is not focused. I also seem to have stumbled over a workaround somehow: I'm using Ubuntu Gnome here, and after installing kubuntu-desktop (during installation I selected lightdm, not gdm) and starting into KDE once (there the affected buttons didn't work either), on next login the login screen changed to KDE-style (where you can choose the UI type). After logging in to Gnome again the buttons seem to work. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xkeyboard-config in Ubuntu. https://bugs.launchpad.net/bugs/1404468 Title: German neo2 keyboard layout: no ALT and SUPER keys Status in xkeyboard-config package in Ubuntu: Confirmed Bug description: Affected version: Ubuntu 14.04. When switching to the Neo 2 keyboard layout, I cannot use the ALT or SUPER keys at all. To reproduce this bug, do the following: - In the keyboard system tray menu, select Text Entry - Click + - Select: Germany (Neo 2) - Close the Text Entry configuration - In the keyboard system tray menu, (temporarily) select Germany (Neo 2) as active layout. Now, shortcuts like ALT+TAB, ALT+F2, ... are no longer working. The same goes for the shortcuts I tried with SUPER. Switching to Neo2 by setxkbmap de neo has the same result. For sake of completeness: There are other bug reports regarding Neo2, reporting that Layer4 (Mod4) is not working. In my case, Mod4 seems to be working fine. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xkeyboard-config/+bug/1404468/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1427804] Re: Mouse pointer disappears after upgrade to kernel 3.19
The issue persists in kernel v4.0-rc3-vivid ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed ** Changed in: xorg (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1427804 Title: Mouse pointer disappears after upgrade to kernel 3.19 Status in linux package in Ubuntu: Confirmed Status in xorg package in Ubuntu: Confirmed Bug description: After upgrade to kernel 3.19, the mouse pointer disappears. The mouse is fully functional, just cannot see its pointer, which makes it pretty useless... ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 Uname: Linux 3.19.0-031900-generic x86_64 NonfreeKernelModules: wl .tmp.unity.support.test.0: ApportVersion: 2.14.7-0ubuntu8.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Mar 3 19:23:30 2015 DistUpgraded: 2014-11-04 19:50:17,092 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu DkmsStatus: bcmwl, 6.30.223.248+bdcom, 3.16.0-31-generic, x86_64: installed bcmwl, 6.30.223.248+bdcom, 3.19.0-031900-generic, x86_64: installed vboxhost, 4.3.18, 3.16.0-30-generic, x86_64: installed vboxhost, 4.3.18, 3.16.0-31-generic, x86_64: installed vboxhost, 4.3.18, 3.19.0-031900-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8534] InstallationDate: Installed on 2014-10-24 (129 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: ASUS All Series ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-031900-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to utopic on 2014-11-04 (118 days ago) dmi.bios.date: 09/30/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2012 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z97-PRO(Wi-Fi ac) dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2012:bd09/30/2014:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ97-PRO(Wi-Fiac):rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.2-0ubuntu0.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.2-0ubuntu0.1 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Tue Mar 3 19:21:19 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id4121 vendor WAC xserver.version: 2:1.16.0-1ubuntu1.3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1427804/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1426259] Re: Dell XPS13 regularly loses connection/becomes unusable on Intel 7260
*** This bug is a duplicate of bug 1315221 *** https://bugs.launchpad.net/bugs/1315221 ** This bug has been marked a duplicate of bug 1315221 8086:08b1 (rev 6b) [Dell XPS 13 9333] iwlwifi regularly loses connection/becomes unusable on Intel 7260 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1426259 Title: Dell XPS13 regularly loses connection/becomes unusable on Intel 7260 Status in network-manager package in Ubuntu: New Bug description: i'm affected by the bug described here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1315221 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-46.75-generic 3.13.11-ckt15 Uname: Linux 3.13.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CurrentDesktop: Unity Date: Fri Feb 27 09:13:07 2015 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20130203-1 IfupdownConfig: auto lo iface lo inet loopback InstallationDate: Installed on 2014-10-31 (118 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20130203-13:50 IpRoute: default via 192.168.42.129 dev usb0 proto static 10.0.3.0/24 dev lxcbr0 proto kernel scope link src 10.0.3.1 192.168.42.0/24 dev usb0 proto kernel scope link src 192.168.42.20 metric 1 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: Upgraded to trusty on 2014-11-06 (112 days ago) mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2015-01-17T17:14:49.420493 nmcli-dev: DEVICE TYPE STATE DBUS-PATH usb0 802-3-ethernetconnected /org/freedesktop/NetworkManager/Devices/1 wlan0 802-11-wireless disconnected /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1426259/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 958345] Re: ttf-indic-fonts packages are outdated
The libreoffice-l10n-in package recommends ttf-indic-fonts and should be updated to fonts-indic. ** Also affects: libreoffice (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/958345 Title: ttf-indic-fonts packages are outdated Status in libreoffice package in Ubuntu: New Status in ttf-indic-fonts package in Ubuntu: Confirmed Bug description: The Debian fonts team recently restructured the indic fonts. ttf-indic-fonts changed to fonts-indic. This is meta package and all packages ttf-[language]-fonts renamed to fonts-[script/foundry]. In addition to this all fonts were updated to latest versions from upstreams. I request ubuntu maintainers to update the fonts to latest versions and consider following the debian package naming changes for fonts. Refer: http://packages.debian.org/sid/fonts-indic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/958345/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1419061] Re: On Ubuntu Kylin detect all packages as not genuine
It's the ubuntukylin-default-settings package which modifies /etc/os- release: $ grep -r 'os-release' * debian/ubuntukylin-default-settings.postrm:sed -i /NAME/s/Ubuntu Kylin/Ubuntu/g /etc/os-release debian/changelog: * Be more specific in replacing Ubuntu in /etc/os-release to prevent debian/changelog: * Use os-release instead of ubuntukylin-release debian/ubuntukylin-default-settings.preinst:sed -i 's/\(NAME=Ubuntu\)/\1 Kylin/' /etc/os-release debian/ubuntukylin-default-settings.preinst:sed -i 's/\(PRETTY_NAME=Ubuntu\) 1/\1 Kylin 1/' /etc/os-release So that package should also contain the apport setup in comment #23. ** Package changed: apport (Ubuntu) = ubuntukylin-default-settings (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1419061 Title: On Ubuntu Kylin detect all packages as not genuine Status in Ubuntu Kylin: Triaged Status in ubuntukylin-default-settings package in Ubuntu: Triaged Bug description: Hallo In Vivid if I run apport-bug (pkg) it always return that is not a genuine package: The problem cannot be reported: This is not an official Ubuntu package. Please remove any third party package and try again. see attached screenshot. Set as critical because it represent a loss of informations in a test environement ( eg: a medium user feel discouraged to report a bug) Thanks Fabio P.S.: This start happening after apport's upgrades and NOT runing a fresh installation. - WORKAROUND at #20 --- ApportLog: ApportVersion: 2.16.1-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity DistroRelease: Ubuntu Kylin 14.10 InstallationDate: Installed on 2014-08-12 (184 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) Package: apport 2.16.1-0ubuntu2 [origin: Ubuntu] PackageArchitecture: all ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5 Tags: third-party-packages vivid Uname: Linux 3.18.0-13-generic x86_64 UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. UpgradeStatus: Upgraded to vivid on 2015-01-10 (33 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True --- ApportVersion: 2.16.2-0ubuntu1 Architecture: amd64 CrashReports: 640:1000:120:72115:2015-03-05 10:38:22.031167507 +0100:2015-03-06 10:30:38.543396523 +0100:/var/crash/_usr_bin_sogou-qimpanel.1000.crash 644:0:120:0:2015-03-06 10:24:01.613003795 +0100:2015-03-06 10:30:17.487292102 +0100:/var/crash/_usr_lib_x86_64-linux-gnu_indicator-sound_indicator-sound-service.108.upload 640:110:120:4951702:2015-03-06 18:50:04.986461639 +0100:2015-03-06 18:50:05.986461639 +0100:/var/crash/_usr_share_apport_apport-gtk.110.crash 640:108:120:306702:2015-03-06 10:22:15.169228553 +0100:2015-03-06 10:24:02.636496873 +0100:/var/crash/_usr_lib_x86_64-linux-gnu_indicator-sound_indicator-sound-service.108.crash 600:110:120:0:2015-03-06 10:24:21.091356436 +0100:2015-02-24 22:14:44.551599595 +0100:/var/crash/_usr_lib_x86_64-linux-gnu_indicator-sound_indicator-sound-service.108.uploaded CurrentDesktop: Unity DistroRelease: Ubuntu Kylin 15.04 EcryptfsInUse: Yes InstallationDate: Installed on 2015-02-24 (9 days ago) InstallationMedia: Ubuntu-Kylin 15.04 Vivid Vervet - Alpha amd64 (20150224) Package: apport 2.16.2-0ubuntu1 [origin: Ubuntu] PackageArchitecture: all Tags: third-party-packages vivid Uname: Linux 4.0.0-04rc2-generic x86_64 UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntukylin/+bug/1419061/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431179] Re: USB 4G modem detected as USB mass storage
Thanks. The -3-1.2:1.0 instance name looks fishy. Can you please check whether this enables the modem? sudo systemctl start usb_modeswitch@3-1.2:1.0.service ? I'm not entirely sure what usb-modeswitch expects here, but perhaps you can give me the output of ls -l /var/lib/usb_modeswitch? That should have some existing IDs. ** Summary changed: - USB 4G modem detected as USB mass storage + usb_modeswitch@.service fails sometimes -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to usb-modeswitch in Ubuntu. https://bugs.launchpad.net/bugs/1431179 Title: usb_modeswitch@.service fails sometimes Status in usb-modeswitch package in Ubuntu: Incomplete Bug description: I lack the technical knowledge to know if this is a bug in udev, systemd or another component. After the switch to systemd, my 4G Huawei USB modem no longer functions as a modem unless I run usb_modeswitch to flip its state from USB mass storage. The command I issue and its output is below, which also show the Vendor and Product ID. Strangely, it does not do this every time. Yesterday when I updated using apt-get dist-upgrade upon reboot the modem worked as expected. But from a cold boot this morning it did not. $ sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -J [sudo] password for damon: Look for default devices ... product ID matched Found devices in default mode (1) Access device 003 on bus 003 Current configuration number is 1 Use interface number 0 Use endpoints 0x01 (out) and 0x81 (in) USB description data (for identification) - Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: - Using standard Huawei switching message Looking for active driver ... OK, driver detached Set up interface 0 Use endpoint 0x01 for message sending ... Trying to send message 1 to endpoint 0x01 ... OK, message successfully sent Reset response endpoint 0x81 Could not reset endpoint (probably harmless): -99 Reset message endpoint 0x01 Could not reset endpoint (probably harmless): -99 Device is gone, skip any further commands - Run lsusb to note any changes. Bye! ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: udev 219-4ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-8.8-generic 3.19.1 Uname: Linux 3.19.0-8-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity CustomUdevRuleFiles: 60-ssd-scheduler.rules Date: Thu Mar 12 11:37:06 2015 InstallationDate: Installed on 2015-02-05 (34 days ago) InstallationMedia: Kubuntu 15.04 Vivid Vervet - Alpha amd64 (20150205) MachineType: LENOVO 427637U ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-8-generic root=UUID=eb18ef51-a2d0-4372-8eb9-ae009a05d4f6 ro quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/26/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 8BET62WW (1.42 ) dmi.board.asset.tag: Not Available dmi.board.name: 427637U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8BET62WW(1.42):bd07/26/2013:svnLENOVO:pn427637U:pvrThinkPadW520:rvnLENOVO:rn427637U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 427637U dmi.product.version: ThinkPad W520 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/usb-modeswitch/+bug/1431179/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430280] Re: NetworkManager-wait-online.service not enabled after package installation
** Changed in: console-setup (Ubuntu) Status: In Progress = Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1430280 Title: NetworkManager-wait-online.service not enabled after package installation Status in console-setup package in Ubuntu: Fix Committed Status in network-manager package in Ubuntu: Triaged Bug description: After installing NetworkManager in a fresh vivid VM, NetworkManager- wait-online.service is disabled. We should consider enabling it on systems which don't have any static interfaces in /etc/network/interfaces, so that units that need network-online.target work properly. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/console-setup/+bug/1430280/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 778054] Re: Packages shouldn't depend on the transitional package python-gobject
This bug was fixed in the package zeitgeist - 0.9.14-2.2ubuntu3 --- zeitgeist (0.9.14-2.2ubuntu3) vivid; urgency=medium * Depend on python-gobject-2 and python-gi instead of python-gobject, because it's a transitional package (LP: #778054) -- Mathew Hodson mathew.hod...@gmail.com Tue, 10 Mar 2015 08:55:16 -0700 ** Changed in: zeitgeist (Ubuntu) Status: In Progress = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-utils in Ubuntu. https://bugs.launchpad.net/bugs/778054 Title: Packages shouldn't depend on the transitional package python-gobject Status in aptdaemon package in Ubuntu: Fix Released Status in desktopcouch package in Ubuntu: Invalid Status in eglibc package in Ubuntu: Invalid Status in gnome-utils package in Ubuntu: Invalid Status in libreoffice package in Ubuntu: Fix Released Status in openoffice.org package in Ubuntu: Won't Fix Status in system-config-printer package in Ubuntu: Fix Released Status in wine1.4 package in Ubuntu: Fix Released Status in zeitgeist package in Ubuntu: Fix Released Status in aptdaemon source package in Trusty: Fix Released Status in desktopcouch source package in Trusty: Invalid Status in eglibc source package in Trusty: Invalid Status in gnome-utils source package in Trusty: Invalid Status in libreoffice source package in Trusty: Fix Released Status in openoffice.org source package in Trusty: Invalid Status in system-config-printer source package in Trusty: Fix Released Status in wine1.4 source package in Trusty: Invalid Status in zeitgeist source package in Trusty: In Progress Bug description: [Impact] python-zeitgeist depends on python-gobject, which means python-gobject cannot be removed from the system. python-gobject is a transitional package, and packages should be updated to no longer depend on it. [Test Case] * Install python-zeitgeist, and verify that python-gobject is not installed with it. * If it is already installed, you should be able to run 'apt-get purge python-gobject' without removing python-zeitgeist. [Regression Potential] Negligible. There are no code changes. The fix only removes a dependency on a transitional package that doesn't provide any files. --- [Impact] system-config-printer-gnome depends on python-gobject, which means python-gobject cannot be removed from the system. python-gobject is a transitional package, and packages should be updated to no longer depend on it. [Test Case] * Install system-config-printer-gnome, and verify that python-gobject is not installed with it. * If it is already installed, you should be able to run 'apt-get purge python-gobject' without removing system-config-printer-gnome. [Regression Potential] Negligible. There are no code changes. The fix only removes a dependency on a transitional package that doesn't provide any files. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/aptdaemon/+bug/778054/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1405794] Re: /usr/share/backgrounds/Water_web_by_Tom_Kijas.jpg has executable permissions set by default.
** Branch linked: lp:ubuntu/vivid-proposed/ubuntu-wallpapers -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-wallpapers in Ubuntu. https://bugs.launchpad.net/bugs/1405794 Title: /usr/share/backgrounds/Water_web_by_Tom_Kijas.jpg has executable permissions set by default. Status in ubuntu-wallpapers package in Ubuntu: Confirmed Bug description: /usr/share/backgrounds/Water_web_by_Tom_Kijas.jpg has executable permissions set by default. This file is part of the ubuntu- wallpapers-trusty_14.04.0.1-0ubuntu1_all package. Clearly as a background image/desktop wallpaper this file should not have executable privileges. I have checked the file with ClamTk 5.10 which reports no problems. I'm flagging this as a security bug because jpg files can be used as an attack vector. But it's likely just a mistake in the packaging of the file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-wallpapers/+bug/1405794/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1429011] Re: 15.04 wallpapers package
** Branch linked: lp:ubuntu/vivid-proposed/ubuntu-wallpapers -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-wallpapers in Ubuntu. https://bugs.launchpad.net/bugs/1429011 Title: 15.04 wallpapers package Status in ubuntu-wallpapers package in Ubuntu: Triaged Bug description: This is the bug we'll attach the wallpapers to for the 15.04 release ;) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-wallpapers/+bug/1429011/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 678421] Re: Error message for a faulty ~/.profile script
I have successfully installed and run lightdm 1.12.3-0ubuntu1 from
utopic-proposed. The behavior in case of a syntax error in ~/.profile
has changed in accordance with the test case in the bug description.
** Tags removed: verification-needed
** Tags added: verification-done
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/678421
Title:
Error message for a faulty ~/.profile script
Status in GDM: The Gnome Display Manager:
New
Status in gdm package in Ubuntu:
Fix Released
Status in lightdm package in Ubuntu:
Fix Released
Status in gdm source package in Trusty:
Fix Released
Status in lightdm source package in Trusty:
Fix Released
Status in gdm source package in Utopic:
Fix Released
Status in lightdm source package in Utopic:
Fix Committed
Status in gdm package in Debian:
New
Bug description:
trusty and utopic SRU requests
==
[Impact]
In case of a syntax error in either of ~/.profile or a few other
similar files, the Xorg login is interrupted, and the user is taken
back to the login screen without an explanation. Debugging this
problem may be a time consuming exercise, especially for non-
experienced users.
With the proposed change, lightdm/gdm does not try to load such a
file, but shows a warning dialog instead. (A warning dialog is also
shown in case of some other type of error, which would not have caused
the login to fail.)
[Test Case]
To reproduce:
* Edit ~/.profile and add something bad, e.g. a non-closed parenthesis.
* Log out and find that you can't log in to a graphical session.
After installing the proposed lightdm/gdm version, you'll instead see
the dialog and can log in.
[Regression Potential]
Since this is only about improved exception handling, it does not at
all affect users with correct configuration files. The regression risk
ought to be minimal.
[Original description]
Binary package hint: gdm
After adding function AddPath { PATH=$1:$PATH } to $HOME/.profile
made the Xorg startup fail. (At that moment I had already forgotten
the changes made to the .profile). As I had autologin that meant it
kept trying to login and finally showed me the graphics
reconfiguration screen. That sent me to a huge hunt for xorg conf and
setup problems.
Anyway finally tracked this down. I had used bash syntax in .profile
file whereas it was run with sh.
This is not a bug per se but I think a user mistake in .profile
shouldn't bring the whole xorg startup to a halt as it does with
autologin. I propose running user .profile and .xprofile scripts
so that Xsession script continues running even if they have errors.
I'm not sure whether this change would have some negative effects as
well.
1) Ubuntu Lucid, Linux egon-laptop 2.6.32-25-generic #45-Ubuntu SMP Sat Oct
16 19:48:22 UTC 2010 i686 GNU/Linux
2) gdm 2.30.2.is.2.30.0-0ubuntu4
To manage notifications about this bug go to:
https://bugs.launchpad.net/gdm/+bug/678421/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1398560] Re: Music playback randomly stops working
** Changed in: canonical-devices-system-image Milestone: ww09-2015 = ww13-2015 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1398560 Title: Music playback randomly stops working Status in the base for Ubuntu mobile products: Confirmed Status in Media Hub: Invalid Status in QT Ubuntu Camera: New Status in pulseaudio package in Ubuntu: New Bug description: While listening to music media-hub stops randomly. Restart of the job and reboots don't fix it. Video works fine. Also, 320 kbps music pauses randomly, might be related. I have also talked about this on the mailing list. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1398560/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1087206] Re: Evince often hangs on close
The bug strikes back... again. Evince 3.14.1-0ubuntu1 @ ubuntu 14.10 x64 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/1087206 Title: Evince often hangs on close Status in evince package in Ubuntu: Confirmed Bug description: When closing an Evince 3.4.0-0ubuntu1.4 window, it often happens that the window remains open but stops responding to events. This is not document-dependent, as this behaviour is seen for different documents, for at least both PDF and EPS documents, and the same document sometimes shows this behaviour, and sometimes doesn't. When attaching using strace, it is hanging on futex(0x7f57e20bb5c4, FUTEX_WAIT_PRIVATE, 1, NULL To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1087206/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1098677] Re: Evolution can't use google calendar
Affects me as well. I can only add my organization's main calendar, not any of the other ones. This is pathetic. It also takes forever for whatever it is doing to fail. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/1098677 Title: Evolution can't use google calendar Status in evolution package in Ubuntu: Confirmed Bug description: I have added a Google App Account (mail calendar) to Evolution but it only synchronizes the mail. It only shows, in status bar, Opening calendar name but nothing more. I'm wait several hours and nothing. I try to add one appointment to Google Calendar from Evolution but when I save it, Evolution assigns it to local calendar. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: evolution 3.6.0-0ubuntu3 ProcVersionSignature: Ubuntu 3.5.0-22.34-i7 3.5.7.2 Uname: Linux 3.5.0-22-i7 x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Fri Jan 11 19:31:33 2013 MarkForUpload: True ProcEnviron: LANGUAGE=es_ES:en TERM=xterm PATH=(custom, no user) LANG=es_ES.UTF-8 SHELL=/bin/bash SourcePackage: evolution UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1098677/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1363150] Re: [FFe] Fcitx input method integration in Unity
** Changed in: fcitx-qimpanel (Ubuntu) Status: New = Fix Released ** Changed in: fcitx (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1363150 Title: [FFe] Fcitx input method integration in Unity Status in Indicator keyboard: New Status in fcitx package in Ubuntu: Fix Released Status in fcitx-qimpanel package in Ubuntu: Fix Released Status in indicator-keyboard package in Ubuntu: Fix Released Status in unity-control-center package in Ubuntu: Fix Released Status in unity-settings-daemon package in Ubuntu: Fix Released Bug description: Fcitx is being included in main, but Unity lacks support for it in various ways: - The Text Entry panel in unity-control-center has no effect on Fcitx' engine list - Per-window source options in Text Entry panel don't affect Fcitx - Fcitx engines (specifically for keyboard layout) are not available under unity-greeter - Fcitx indicator isn't available under the lock screen, only indicator-keyboard - Keyboard layout switching shortcut behaviour provided by Unity and unity-settings-daemon doesn't change Fcitx' current IM - Fcitx indicator is missing some options that are normally provided by indicator-keyboard - Running indicator-keyboard and Fcitx concurrently is redundant as indicator-keyboard only works with Xkb layouts and IBus IMs Some of the changes we need: - Add support for Fcitx input sources to unity-settings-daemon, unity-control-center, indicator-keyboard - Customize the Fcitx indicator under Unity to show some menu options that are available in indicator-keyboard (already merged upstream) - Hide indicator-keyboard in the session when Fcitx' indicator is visible - Add D-Bus property to Fcitx API for the current IM, so that we can detect when the user changes the current IM in the Fcitx indicator, and update the current input source accordingly (already merged upstream) - Use indicator-keyboard icons for keyboard layouts in Fcitx and fcitx-qimpanel when running under Unity We have a PPA that includes most of the proposed changes. It is available at https://launchpad.net/~fcitx-team/+archive/ubuntu/fcitx- transition. It does not hide indicator-keyboard in the session yet, as having both indicators visible is helpful for testing purposes. To manage notifications about this bug go to: https://bugs.launchpad.net/indicator-keyboard/+bug/1363150/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431179] Re: usb_modeswitch@.service fails sometimes
@pitti command output as requested ** Attachment added: usb_modeswitch_output.txt https://bugs.launchpad.net/ubuntu/+source/usb-modeswitch/+bug/1431179/+attachment/4342405/+files/usb_modeswitch_output.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to usb-modeswitch in Ubuntu. https://bugs.launchpad.net/bugs/1431179 Title: usb_modeswitch@.service fails sometimes Status in usb-modeswitch package in Ubuntu: Incomplete Bug description: I lack the technical knowledge to know if this is a bug in udev, systemd or another component. After the switch to systemd, my 4G Huawei USB modem no longer functions as a modem unless I run usb_modeswitch to flip its state from USB mass storage. The command I issue and its output is below, which also show the Vendor and Product ID. Strangely, it does not do this every time. Yesterday when I updated using apt-get dist-upgrade upon reboot the modem worked as expected. But from a cold boot this morning it did not. $ sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -J [sudo] password for damon: Look for default devices ... product ID matched Found devices in default mode (1) Access device 003 on bus 003 Current configuration number is 1 Use interface number 0 Use endpoints 0x01 (out) and 0x81 (in) USB description data (for identification) - Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: - Using standard Huawei switching message Looking for active driver ... OK, driver detached Set up interface 0 Use endpoint 0x01 for message sending ... Trying to send message 1 to endpoint 0x01 ... OK, message successfully sent Reset response endpoint 0x81 Could not reset endpoint (probably harmless): -99 Reset message endpoint 0x01 Could not reset endpoint (probably harmless): -99 Device is gone, skip any further commands - Run lsusb to note any changes. Bye! ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: udev 219-4ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-8.8-generic 3.19.1 Uname: Linux 3.19.0-8-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity CustomUdevRuleFiles: 60-ssd-scheduler.rules Date: Thu Mar 12 11:37:06 2015 InstallationDate: Installed on 2015-02-05 (34 days ago) InstallationMedia: Kubuntu 15.04 Vivid Vervet - Alpha amd64 (20150205) MachineType: LENOVO 427637U ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-8-generic root=UUID=eb18ef51-a2d0-4372-8eb9-ae009a05d4f6 ro quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/26/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 8BET62WW (1.42 ) dmi.board.asset.tag: Not Available dmi.board.name: 427637U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8BET62WW(1.42):bd07/26/2013:svnLENOVO:pn427637U:pvrThinkPadW520:rvnLENOVO:rn427637U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 427637U dmi.product.version: ThinkPad W520 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/usb-modeswitch/+bug/1431179/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431179] Re: usb_modeswitch@.service fails sometimes
OK, it was a stab in the dark, thanks for trying. I'm afraid I need someone familiar with usb-modeswitch to explain how this is supposed to work.. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to usb-modeswitch in Ubuntu. https://bugs.launchpad.net/bugs/1431179 Title: usb_modeswitch@.service fails sometimes Status in usb-modeswitch package in Ubuntu: Incomplete Bug description: I lack the technical knowledge to know if this is a bug in udev, systemd or another component. After the switch to systemd, my 4G Huawei USB modem no longer functions as a modem unless I run usb_modeswitch to flip its state from USB mass storage. The command I issue and its output is below, which also show the Vendor and Product ID. Strangely, it does not do this every time. Yesterday when I updated using apt-get dist-upgrade upon reboot the modem worked as expected. But from a cold boot this morning it did not. $ sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -J [sudo] password for damon: Look for default devices ... product ID matched Found devices in default mode (1) Access device 003 on bus 003 Current configuration number is 1 Use interface number 0 Use endpoints 0x01 (out) and 0x81 (in) USB description data (for identification) - Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: - Using standard Huawei switching message Looking for active driver ... OK, driver detached Set up interface 0 Use endpoint 0x01 for message sending ... Trying to send message 1 to endpoint 0x01 ... OK, message successfully sent Reset response endpoint 0x81 Could not reset endpoint (probably harmless): -99 Reset message endpoint 0x01 Could not reset endpoint (probably harmless): -99 Device is gone, skip any further commands - Run lsusb to note any changes. Bye! ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: udev 219-4ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-8.8-generic 3.19.1 Uname: Linux 3.19.0-8-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity CustomUdevRuleFiles: 60-ssd-scheduler.rules Date: Thu Mar 12 11:37:06 2015 InstallationDate: Installed on 2015-02-05 (34 days ago) InstallationMedia: Kubuntu 15.04 Vivid Vervet - Alpha amd64 (20150205) MachineType: LENOVO 427637U ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-8-generic root=UUID=eb18ef51-a2d0-4372-8eb9-ae009a05d4f6 ro quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/26/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 8BET62WW (1.42 ) dmi.board.asset.tag: Not Available dmi.board.name: 427637U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8BET62WW(1.42):bd07/26/2013:svnLENOVO:pn427637U:pvrThinkPadW520:rvnLENOVO:rn427637U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 427637U dmi.product.version: ThinkPad W520 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/usb-modeswitch/+bug/1431179/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1429011] Re: 15.04 wallpapers package
Now with less compression and more MBs. ** Attachment added: Suru_Wallpaper_Desktop_4096x2304_Purple.png https://bugs.launchpad.net/ubuntu/+source/ubuntu-wallpapers/+bug/1429011/+attachment/4341559/+files/Suru_Wallpaper_Desktop_4096x2304_Purple.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-wallpapers in Ubuntu. https://bugs.launchpad.net/bugs/1429011 Title: 15.04 wallpapers package Status in ubuntu-wallpapers package in Ubuntu: Triaged Bug description: This is the bug we'll attach the wallpapers to for the 15.04 release ;) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-wallpapers/+bug/1429011/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430893] Re: [FFe] Install Fcitx for Chinese users
** Branch linked: lp:~happyaron/ubuntu-seeds/lp-1430893 ** Description changed: There are currently two main supported input method frameworks available for CJK users: IBus (current default) and Fcitx. Both are mature projects, but Fcitx is better suited to Chinese users than IBus is, and is already the default in Ubuntu Kylin. IBus is increasingly moving in the direction of removing features upstream like tracking input state on a per-context basis. Also, the leading input method provider in China with more than 300 million users, Sogou, only supports Fcitx under Linux. Skinning support is non-existent in IBus. We've added support for Fcitx on the same level as IBus in Unity, so - this FFe is a proposal to install Fcitx via language-selector for users - who want the Chinese langpacks installed, as a transition towards making - Fcitx the default for all users next cycle. This will involve changes to - language-selector, im-config, and language-pack-zh-*. Those who are not - using the Chinese langpack, or have explicitly selected IBus as their - chosen input method should be unaffected; these changes will only affect - new Chinese users, and Chinese users who have never explicitly chosen an - input method framework in their language settings. + this FFe is a proposal to make Fcitx the default for Chinese locales + this cycle, as a transition towards making Fcitx the default for all + users next cycle. The changes should simply be seeding Fcitx and its + related packages on the CD image, as well as possible changes to im- + config. Those who have explicitly selected IBus as their chosen input + method should be unaffected; these changes will only affect new users, + and users who have never explicitly chosen an input method framework in + their language settings. + + Also, this FFe propose to make language-selector to install more input + method packages for Chinese users to their Fcitx equivalents (currently + IBus) when adding/completing Chinese language support. ** Also affects: ubuntu-meta (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1430893 Title: [FFe] Install Fcitx for Chinese users Status in im-config package in Ubuntu: New Status in language-selector package in Ubuntu: New Status in ubuntu-meta package in Ubuntu: New Bug description: There are currently two main supported input method frameworks available for CJK users: IBus (current default) and Fcitx. Both are mature projects, but Fcitx is better suited to Chinese users than IBus is, and is already the default in Ubuntu Kylin. IBus is increasingly moving in the direction of removing features upstream like tracking input state on a per-context basis. Also, the leading input method provider in China with more than 300 million users, Sogou, only supports Fcitx under Linux. Skinning support is non-existent in IBus. We've added support for Fcitx on the same level as IBus in Unity, so this FFe is a proposal to make Fcitx the default for Chinese locales this cycle, as a transition towards making Fcitx the default for all users next cycle. The changes should simply be seeding Fcitx and its related packages on the CD image, as well as possible changes to im- config. Those who have explicitly selected IBus as their chosen input method should be unaffected; these changes will only affect new users, and users who have never explicitly chosen an input method framework in their language settings. Also, this FFe propose to make language-selector to install more input method packages for Chinese users to their Fcitx equivalents (currently IBus) when adding/completing Chinese language support. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/im-config/+bug/1430893/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1424980] Re: [ffe] xorg-server 1.17
12:54 mlankhorst infinity: we have fglrx now, can you ack 1424980 ? 12:59 infinity mlankhorst: Yeahp, go for it. Please don't break the world. Kthx. ** Changed in: xorg-server (Ubuntu) Status: New = Triaged -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1424980 Title: [ffe] xorg-server 1.17 Status in xorg-server package in Ubuntu: Triaged Bug description: Changes since v1.16: - Adam continues to strip out stale code and clean up the server. Thousands of lines of unnecessary code have disappeared yet again. - The modesetting driver has been merged into the server code base, simplifying ongoing maintenance by coupling it to the X server ABI/API release schedule. This now includes DRI2 support (so that GLX works correctly) along with Glamor support (which handles DRI3). - Lots of Glamor improvements, including a rewrite of the core protocol rendering functions I would have uploaded it before feature freeze, but fglrx isn't ready yet. again To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1424980/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1328678] Re: slash key '/' no longer opens the find box
** Also affects: evince (Ubuntu Trusty) Importance: Undecided Status: New ** Changed in: evince (Ubuntu Trusty) Status: New = Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/1328678 Title: slash key '/' no longer opens the find box Status in evince package in Ubuntu: Fix Released Status in evince source package in Trusty: Fix Committed Bug description: * Impact - using / doesn't start a search which some users are used to * Test case 1. Open a pdf document. 2. Press the '/' key. Expected: The find dialogue opens. Actual: Nothing * Regression potential the code adds an extra action, shouldn't create any new issue - ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: evince 3.10.3-0ubuntu10 ProcVersionSignature: Ubuntu 3.13.0-29.53-generic 3.13.11.2 Uname: Linux 3.13.0-29-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Tue Jun 10 22:15:53 2014 InstallationDate: Installed on 2013-10-25 (228 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64+mac (20131016.1) KernLog: SourcePackage: evince UpgradeStatus: Upgraded to trusty on 2014-04-23 (48 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1328678/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1422096] Re: Occasionally no network on resume
It's happening very frequently now. I tried to get some state this morning. The network would intermittently work when it was in the bad state, and only started working when I disconnected wlan0 *and* reconnected eth0. -- bad state -- laney@iota netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 laney@iota ping orangesquash.org.uk PING orangesquash.org.uk (85.119.82.37) 56(84) bytes of data. ^C --- orangesquash.org.uk ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2016ms laney@iota ip route show default via 192.168.1.1 dev eth0 proto static metric 1024 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.134 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.106 -- good state -- laney@iota ip ro show default via 192.168.1.1 dev eth0 proto static metric 1024 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.106 laney@iota netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 Can someone please tell me what other debugging information will be useful? Attaching another syslog. ** Attachment added: syslog https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1422096/+attachment/4342455/+files/syslog -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1422096 Title: Occasionally no network on resume Status in network-manager package in Ubuntu: New Bug description: Sometimes I resume and n-m thinks that lxcbr0 is a connected wired network, so doesn't connect to the wireless network that I actually want to use until I restart it. laney@iota nmcli d DEVICE TYPE STATE CONNECTION lxcbr0 bridgeconnected lxcbr0 virbr0 bridgeconnected virbr0 50:46:5D:18:E7:06 btdisconnected -- wlan0 wifi disconnected -- eth0 ethernet unavailable -- lo loopback unmanaged -- virbr0-nic tap unmanaged -- laney@iota nmcli d w l ifname wlan0 * SSID MODE CHAN RATE SIGNAL BARS SECURITY laney@iota cat /etc/network/interfaces auto lo iface lo inet loopback ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu6 ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5 Uname: Linux 3.18.0-13-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.16.1-0ubuntu2 Architecture: amd64 CurrentDesktop: GNOME Date: Sun Feb 15 10:37:28 2015 IfupdownConfig: auto lo iface lo inet loopback InstallationDate: Installed on 2012-10-18 (850 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) IpRoute: default via 192.168.1.1 dev wlan0 proto static metric 1024 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.134 SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2014-07-30 (200 days ago) nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1422096/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430971] [NEW] Users not warned about switch to fcitx and no instructions are given
Public bug reported: Received the newest update to 0.0.0+15.04.20150310 a few minutes ago. There is a significant change to behavior with the change to fcitx from ibus. Users, however, are given no warning and no instructions on how to get their preferred input methods set up again. This has the potential to cause major inconveniences to users of non- English input methods, especially for Asian and other languages where the user needs a full IM and not just an alternative keyboard. 1. Users need to be notified of the change and of the need install the necessary fcitx packages. Most users will need some instructions on what to do. 2. After installing fcitx-libpinyin, the Input Method Configuration dialog still showed only keyboard layouts -- even after a reboot. I had to restart fcitx using the restart option in the drop-down menu before additional (non-keyboard) options showed up in the list. 3. After that, finding pinyin input was still not intuitive. Past dialogs had you search for 'Chinese', then choose the appropriate method. In this case, however, 'Chinese' is only used in the 2nd (right) column, which is apparently not searched; so typing 'Chinese' led to no results. After removing the search term and scrolling to the bottom of the list, I saw that the IM's are listed by method name (Pinyin, BoPoMoFo, etc) and do not use the name of the language in the 1st (left) column. This is not expected by users and not consistent with the name of the keyboard methods. ** Affects: indicator-keyboard (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to indicator-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1430971 Title: Users not warned about switch to fcitx and no instructions are given Status in indicator-keyboard package in Ubuntu: New Bug description: Received the newest update to 0.0.0+15.04.20150310 a few minutes ago. There is a significant change to behavior with the change to fcitx from ibus. Users, however, are given no warning and no instructions on how to get their preferred input methods set up again. This has the potential to cause major inconveniences to users of non- English input methods, especially for Asian and other languages where the user needs a full IM and not just an alternative keyboard. 1. Users need to be notified of the change and of the need install the necessary fcitx packages. Most users will need some instructions on what to do. 2. After installing fcitx-libpinyin, the Input Method Configuration dialog still showed only keyboard layouts -- even after a reboot. I had to restart fcitx using the restart option in the drop-down menu before additional (non-keyboard) options showed up in the list. 3. After that, finding pinyin input was still not intuitive. Past dialogs had you search for 'Chinese', then choose the appropriate method. In this case, however, 'Chinese' is only used in the 2nd (right) column, which is apparently not searched; so typing 'Chinese' led to no results. After removing the search term and scrolling to the bottom of the list, I saw that the IM's are listed by method name (Pinyin, BoPoMoFo, etc) and do not use the name of the language in the 1st (left) column. This is not expected by users and not consistent with the name of the keyboard methods. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-keyboard/+bug/1430971/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1425972] Re: Firefox no longer supports -remote parameter
** Bug watch added: debbugs.gnu.org #14038
http://debbugs.gnu.org/cgi-bin/bugreport.cgi?bug=14038
** Changed in: emacs
Importance: Undecided = Unknown
** Changed in: emacs
Status: Fix Released = Unknown
** Changed in: emacs
Remote watch: None = debbugs.gnu.org #14038
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to emacs24 in Ubuntu.
https://bugs.launchpad.net/bugs/1425972
Title:
Firefox no longer supports -remote parameter
Status in GNU Emacs:
Unknown
Status in exo:
Fix Released
Status in The Mozilla Firefox Browser:
Fix Released
Status in Python:
Unknown
Status in emacs24 package in Ubuntu:
Confirmed
Status in exo package in Ubuntu:
Confirmed
Status in firefox package in Ubuntu:
Fix Released
Status in emacs24 source package in Trusty:
Confirmed
Status in exo source package in Trusty:
Fix Committed
Status in firefox source package in Trusty:
Fix Released
Status in emacs24 source package in Utopic:
Confirmed
Status in exo source package in Utopic:
In Progress
Status in firefox source package in Utopic:
Fix Released
Status in exo package in Debian:
New
Bug description:
[Impact]
As of Firefox version 36, the -remote commandline parameter was dropped.
This parameter is used in versions of exo prior to 0.10.3. Because of this,
opening any URLs via exo-open will cause a new firefox window to launch at the
home screen.
As reported, this affects the terminal, ubuntu-bug, xchat, and
numerous other applications.
[Test Case]
1. Set Firefox as the default web browser in Preferred Applications.
2. From a terminal, type the following:
exo-open http://www.xfce.org;
Expected: Firefox opens at http://www.xfce.org
Actual: Firefox opens at the home page.
[Regression Potential]
No regressions by this change. This fixes the application call to correctly
open URLs.
---
[Original Report]
When I click a link from an email it does not work any more.
Instead of opening the link in a new tab, Firefox opens a new empty
window and does not follow the link.
If I change the default browser for my desktop from Firefox to Chrome,
then Chrome can open the link fine.
I have started seeing this today since firefox was upgraded from v35
to 36.
My email client is Mozilla thunderbird at the latest stable version.
ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: firefox 36.0+build2-0ubuntu0.14.10.4
ProcVersionSignature: Ubuntu 3.16.0-31.41-generic 3.16.7-ckt5
Uname: Linux 3.16.0-31-generic x86_64
AddonCompatCheckDisabled: False
ApportVersion: 2.14.7-0ubuntu8.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: dpottage 3729 F pulseaudio
BuildID: 20150224133805
Channel: Unavailable
CurrentDesktop: XFCE
Date: Thu Feb 26 14:30:41 2015
ForcedLayersAccel: False
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IncompatibleExtensions:
English (South Africa) Language Pack - langpack-en...@firefox.mozilla.org
English (GB) Language Pack - langpack-en...@firefox.mozilla.org
Français Language Pack - langpack...@firefox.mozilla.org
Deutsch (DE) Language Pack - langpack...@firefox.mozilla.org
Default - {972ce4c6-7e08-4474-a285-3208198ce6fd}
InstallationDate: Installed on 2013-07-02 (604 days ago)
InstallationMedia: Xubuntu 13.04 Raring Ringtail - Release amd64
(20130423.1)
IpRoute:
default via 192.168.1.254 dev eth0 proto static
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.131 metric
1
MostRecentCrashID: bp-86a16931-63d2-435e-8324-421212140304
Plugins:
Shockwave Flash - /usr/lib/flashplugin-installer/libflashplayer.so
LibreOffice Plug-in - /usr/lib/libreoffice/program/libnpsoplugin.so
(browser-plugin-libreoffice)
Java(TM) Plug-in 11.25.2 -
/usr/lib/jvm/java-8-oracle/jre/lib/amd64/libnpjp2.so
PrefSources: prefs.js
Profiles: Profile0 (Default) - LastVersion=36.0/20150224133805 (In use)
RelatedPackageVersions: browser-plugin-libreoffice 1:4.3.3-0ubuntu1
RfKill:
0: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
RunningIncompatibleAddons: True
SourcePackage: firefox
SubmittedCrashIDs: bp-86a16931-63d2-435e-8324-421212140304
UpgradeStatus: Upgraded to utopic on 2014-10-29 (119 days ago)
dmi.bios.date: 11/23/2012
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A08
dmi.board.name: 0XR1GT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvrA08:bd11/23/2012:svnDellInc.:pnVostro270:pvr:rvnDellInc.:rn0XR1GT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: Vostro 270
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/emacs/+bug/1425972/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post
[Desktop-packages] [Bug 1431222] [NEW] pci_devices does not terminate at computer shutdown
Public bug reported: desktop machine fails to shut down ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pm-utils 1.4.1-13ubuntu0.1 ProcVersionSignature: Ubuntu 3.13.0-46.77-generic 3.13.11-ckt15 Uname: Linux 3.13.0-46-generic i686 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu3.7 Architecture: i386 Date: Wed Mar 4 14:10:15 2015 ExecutablePath: /usr/lib/pm-utils/power.d/pci_devices InstallationDate: Installed on 2014-10-13 (149 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) InterpreterPath: /bin/dash OmitPids: 3513 563 3519 475 3620 563 3519 475 3620 PackageArchitecture: all ProcCmdline: /bin/sh /usr/lib/pm-utils/power.d/pci_devices false ProcEnviron: LC_COLLATE=C PATH=(custom, no user) SourcePackage: pm-utils Title: pci_devices does not terminate at computer shutdown UpgradeStatus: Upgraded to trusty on 2014-11-21 (111 days ago) ** Affects: pm-utils (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 shutdown-hang trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pm-utils in Ubuntu. https://bugs.launchpad.net/bugs/1431222 Title: pci_devices does not terminate at computer shutdown Status in pm-utils package in Ubuntu: New Bug description: desktop machine fails to shut down ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pm-utils 1.4.1-13ubuntu0.1 ProcVersionSignature: Ubuntu 3.13.0-46.77-generic 3.13.11-ckt15 Uname: Linux 3.13.0-46-generic i686 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu3.7 Architecture: i386 Date: Wed Mar 4 14:10:15 2015 ExecutablePath: /usr/lib/pm-utils/power.d/pci_devices InstallationDate: Installed on 2014-10-13 (149 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) InterpreterPath: /bin/dash OmitPids: 3513 563 3519 475 3620 563 3519 475 3620 PackageArchitecture: all ProcCmdline: /bin/sh /usr/lib/pm-utils/power.d/pci_devices false ProcEnviron: LC_COLLATE=C PATH=(custom, no user) SourcePackage: pm-utils Title: pci_devices does not terminate at computer shutdown UpgradeStatus: Upgraded to trusty on 2014-11-21 (111 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/1431222/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 29894] Re: can't take screenshot when menu on panel is opened
** Project changed: gnome-utils = gnome-panel ** Package changed: gnome-utils (Ubuntu) = gnome-panel (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-screenshot in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/29894 Title: can't take screenshot when menu on panel is opened Status in Desktop panel for GNOME: In Progress Status in Unity: Triaged Status in gnome-panel package in Ubuntu: Triaged Status in gnome-screenshot package in Ubuntu: Confirmed Status in gnome-shell package in Ubuntu: Confirmed Status in unity package in Ubuntu: Triaged Bug description: I can always press the Print screen key to take a screenshot of my desktop. When i click on say, the System menu in the gnome-panel, it just doesn't work anymore. Note: this is in fact only a symptom of bug 10905 that states that no hotkeys/shortcuts whatsoever can be triggered when a menu is open. there seems to be a dispute if that is a bug or an intended design decision. thus bug 10905 and its duplicates always get closed. people seem to agree that not being able to take screenshots is not intended bahavior and considered a bug. thus this report is allowed to stay open :) a known workaround for taking screenshots of menus is to directly launch the screengrabber with a delay like so: gnome-screenshot --delay=5 To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-panel/+bug/29894/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1429560] Re: reported System problems on startup after system updates (nvidia-331-updates-uvm 331.113-0ubuntu0.1: nvidia-331-updates-uvm kernel module failed to build)
*** This bug is a duplicate of bug 1398212 *** https://bugs.launchpad.net/bugs/1398212 Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: nvidia-graphics-drivers-331-updates (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331-updates in Ubuntu. https://bugs.launchpad.net/bugs/1429560 Title: reported System problems on startup after system updates (nvidia-331 -updates-uvm 331.113-0ubuntu0.1: nvidia-331-updates-uvm kernel module failed to build) Status in nvidia-graphics-drivers-331-updates package in Ubuntu: Confirmed Bug description: I think this is a duplicate of an existing error. It gives me the error messages on startup but does not actually stop me from doing anything. Ubuntu 14.10 apt-cache policy nvidia-331-updates-uvm nvidia-331-updates-uvm: Installed: 331.113-0ubuntu0.1 Candidate: 331.113-0ubuntu0.1 Version table: *** 331.113-0ubuntu0.1 0 500 http://archive.ubuntu.com/ubuntu/ utopic-updates/restricted amd64 Packages 500 http://archive.ubuntu.com/ubuntu/ utopic-security/restricted amd64 Packages 100 /var/lib/dpkg/status 331.89-0ubuntu5 0 500 http://archive.ubuntu.com/ubuntu/ utopic/restricted amd64 Packages ProblemType: Package DistroRelease: Ubuntu 14.10 Package: nvidia-331-updates-uvm 331.113-0ubuntu0.1 ProcVersionSignature: Ubuntu 3.16.0-32.42-generic 3.16.7-ckt7 Uname: Linux 3.16.0-32-generic x86_64 ApportVersion: 2.14.7-0ubuntu8.2 Architecture: amd64 DKMSKernelVersion: 3.16.0-32-generic Date: Sat Mar 7 22:39:49 2015 InstallationDate: Installed on 2014-10-31 (127 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) PackageVersion: 331.113-0ubuntu0.1 SourcePackage: nvidia-graphics-drivers-331-updates Title: nvidia-331-updates-uvm 331.113-0ubuntu0.1: nvidia-331-updates-uvm kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331-updates/+bug/1429560/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1160569]
Nigel Horne added the following comment to Launchpad bug report 1160569: On 3/10/15 1:34 PM, Gregoire-roussel wrote: firefox -v (process:8553): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed Mozilla Firefox 36.0.1 Even if firefox works properly. This warning should not appear. Is there some possible settings to avoid such warning to appear ? It's not a warning - it's a critical message. -Nigel -- http://launchpad.net/bugs/1160569 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1160569 Title: GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed Status in The Mozilla Firefox Browser: Confirmed Status in The G Library - GLib: Unknown Status in apport package in Ubuntu: Confirmed Status in firefox package in Ubuntu: Triaged Status in thunderbird package in Ubuntu: Triaged Bug description: Have a look at the screen-shot for more details. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: firefox 19.0.2+build1-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-14.24-generic 3.8.4 Uname: Linux 3.8.0-14-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.9.2-0ubuntu4 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: BuildID: 20130308124351 CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Channel: Unavailable Date: Tue Mar 26 21:48:57 2013 ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-03-26 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64+mac (20130326) IpRoute: default via 10.0.1.1 dev eth0 proto static 10.0.1.0/24 dev eth0 proto kernel scope link src 10.0.1.16 metric 1 169.254.0.0/16 dev eth0 scope link metric 1000 IwConfig: eth0 no wireless extensions. lono wireless extensions. MarkForUpload: True Plugins: Windows Media Player Plug-in 10 (compatible; Videos) - /usr/lib/mozilla/plugins/libtotem-gmp-plugin.so (totem-mozilla) VLC Multimedia Plugin (compatible Videos 3.6.3) - /usr/lib/mozilla/plugins/libtotem-cone-plugin.so (totem-mozilla) DivX® Web Player - /usr/lib/mozilla/plugins/libtotem-mully-plugin.so (totem-mozilla) QuickTime Plug-in 7.6.6 - /usr/lib/mozilla/plugins/libtotem-narrowspace-plugin.so (totem-mozilla) iTunes Application Detector - /usr/lib/mozilla/plugins/librhythmbox-itms-detection-plugin.so (rhythmbox-mozilla) PrefSources: prefs.js Profiles: Profile0 (Default) - LastVersion=19.0.2/20130308124351 RelatedPackageVersions: totem-mozilla 3.6.3-0ubuntu4 rhythmbox-mozilla 2.98-0ubuntu3 RfKill: RunningIncompatibleAddons: False SourcePackage: firefox UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1160569/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430280] Re: NetworkManager-wait-online.service not enabled after package installation
** Changed in: network-manager (Ubuntu) Status: Triaged = In Progress ** Bug watch added: GNOME Bug Tracker #746039 https://bugzilla.gnome.org/show_bug.cgi?id=746039 ** Also affects: network-manager via https://bugzilla.gnome.org/show_bug.cgi?id=746039 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1430280 Title: NetworkManager-wait-online.service not enabled after package installation Status in NetworkManager: Unknown Status in console-setup package in Ubuntu: Fix Committed Status in network-manager package in Ubuntu: In Progress Bug description: After installing NetworkManager in a fresh vivid VM, NetworkManager- wait-online.service is disabled. We should consider enabling it on systems which don't have any static interfaces in /etc/network/interfaces, so that units that need network-online.target work properly. To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1430280/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1425972]
I don't think this works on windows.
I opened my 2nd profile with this:
firefox.exe -P Dev -no-remote
Then tried to open a new tab in that profile with this:
firefox.exe -P Dev -remote openURL(http://www.bing.com,new-tab)
it didnt work :(
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to emacs24 in Ubuntu.
https://bugs.launchpad.net/bugs/1425972
Title:
Firefox no longer supports -remote parameter
Status in exo:
Fix Released
Status in The Mozilla Firefox Browser:
Fix Released
Status in One Hundred Papercuts:
Confirmed
Status in emacs24 package in Ubuntu:
Confirmed
Status in exo package in Ubuntu:
Confirmed
Status in firefox package in Ubuntu:
Fix Released
Status in emacs24 source package in Trusty:
Confirmed
Status in exo source package in Trusty:
Fix Committed
Status in firefox source package in Trusty:
Fix Released
Status in emacs24 source package in Utopic:
Confirmed
Status in exo source package in Utopic:
In Progress
Status in firefox source package in Utopic:
Fix Released
Status in exo package in Debian:
New
Bug description:
[Impact]
As of Firefox version 36, the -remote commandline parameter was dropped.
This parameter is used in versions of exo prior to 0.10.3. Because of this,
opening any URLs via exo-open will cause a new firefox window to launch at the
home screen.
As reported, this affects the terminal, ubuntu-bug, xchat, and
numerous other applications.
[Test Case]
1. Set Firefox as the default web browser in Preferred Applications.
2. From a terminal, type the following:
exo-open http://www.xfce.org;
Expected: Firefox opens at http://www.xfce.org
Actual: Firefox opens at the home page.
[Regression Potential]
No regressions by this change. This fixes the application call to correctly
open URLs.
---
[Original Report]
When I click a link from an email it does not work any more.
Instead of opening the link in a new tab, Firefox opens a new empty
window and does not follow the link.
If I change the default browser for my desktop from Firefox to Chrome,
then Chrome can open the link fine.
I have started seeing this today since firefox was upgraded from v35
to 36.
My email client is Mozilla thunderbird at the latest stable version.
ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: firefox 36.0+build2-0ubuntu0.14.10.4
ProcVersionSignature: Ubuntu 3.16.0-31.41-generic 3.16.7-ckt5
Uname: Linux 3.16.0-31-generic x86_64
AddonCompatCheckDisabled: False
ApportVersion: 2.14.7-0ubuntu8.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: dpottage 3729 F pulseaudio
BuildID: 20150224133805
Channel: Unavailable
CurrentDesktop: XFCE
Date: Thu Feb 26 14:30:41 2015
ForcedLayersAccel: False
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IncompatibleExtensions:
English (South Africa) Language Pack - langpack-en...@firefox.mozilla.org
English (GB) Language Pack - langpack-en...@firefox.mozilla.org
Français Language Pack - langpack...@firefox.mozilla.org
Deutsch (DE) Language Pack - langpack...@firefox.mozilla.org
Default - {972ce4c6-7e08-4474-a285-3208198ce6fd}
InstallationDate: Installed on 2013-07-02 (604 days ago)
InstallationMedia: Xubuntu 13.04 Raring Ringtail - Release amd64
(20130423.1)
IpRoute:
default via 192.168.1.254 dev eth0 proto static
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.131 metric
1
MostRecentCrashID: bp-86a16931-63d2-435e-8324-421212140304
Plugins:
Shockwave Flash - /usr/lib/flashplugin-installer/libflashplayer.so
LibreOffice Plug-in - /usr/lib/libreoffice/program/libnpsoplugin.so
(browser-plugin-libreoffice)
Java(TM) Plug-in 11.25.2 -
/usr/lib/jvm/java-8-oracle/jre/lib/amd64/libnpjp2.so
PrefSources: prefs.js
Profiles: Profile0 (Default) - LastVersion=36.0/20150224133805 (In use)
RelatedPackageVersions: browser-plugin-libreoffice 1:4.3.3-0ubuntu1
RfKill:
0: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
RunningIncompatibleAddons: True
SourcePackage: firefox
SubmittedCrashIDs: bp-86a16931-63d2-435e-8324-421212140304
UpgradeStatus: Upgraded to utopic on 2014-10-29 (119 days ago)
dmi.bios.date: 11/23/2012
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A08
dmi.board.name: 0XR1GT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvrA08:bd11/23/2012:svnDellInc.:pnVostro270:pvr:rvnDellInc.:rn0XR1GT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: Vostro 270
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/exo/+bug/1425972/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe :
[Desktop-packages] [Bug 1261666] Re: [pulseaudio] module.c: Failed to load module module-echo-cancel (argument: aec_method=webrtc): initia lization failed.
webrtc is lowercase, this works for me: $ pactl load-module module-echo-cancel aec_method=webrtc -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1261666 Title: [pulseaudio] module.c: Failed to load module module-echo-cancel (argument: aec_method=webrtc): initia lization failed. Status in pulseaudio package in Ubuntu: Fix Released Bug description: Hello! 13.10. Trying to load module-echo-cancel with webrtc and get: [pulseaudio] module.c: Failed to load module module-echo-cancel (argument: aec_method=webrtc): initia lization failed. I guess this is wrong... To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1261666/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431229] [NEW] nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build
Public bug reported: Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic Error! Bad return status for module build on kernel: 3.13.0-46-generic (x86_64) Consult /var/lib/dkms/nvidia-331/331.113/build/make.log for more information. Error! Bad return status for module build on kernel: 3.13.0-46-generic (x86_64) Consult /var/lib/dkms/nvidia-331-uvm/331.113/build/make.log for more information. Setting up linux-libc-dev:amd64 (3.13.0-46.79) ... Processing triggers for libc-bin (2.19-0ubuntu6.6) ... ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331-uvm 331.113-0ubuntu0.0.4 ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7 Uname: Linux 3.13.0-37-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 DKMSKernelVersion: 3.13.0-46-generic Date: Thu Mar 12 10:13:47 2015 InstallationDate: Installed on 2014-10-09 (153 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) PackageVersion: 331.113-0ubuntu0.0.4 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: nvidia-graphics-drivers-331 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package third-party-packages trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1431229 Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build Status in nvidia-graphics-drivers-331 package in Ubuntu: New Bug description: Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic Error! Bad return status for module build on kernel: 3.13.0-46-generic (x86_64) Consult /var/lib/dkms/nvidia-331/331.113/build/make.log for more information. Error! Bad return status for module build on kernel: 3.13.0-46-generic (x86_64) Consult /var/lib/dkms/nvidia-331-uvm/331.113/build/make.log for more information. Setting up linux-libc-dev:amd64 (3.13.0-46.79) ... Processing triggers for libc-bin (2.19-0ubuntu6.6) ... ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331-uvm 331.113-0ubuntu0.0.4 ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7 Uname: Linux 3.13.0-37-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 DKMSKernelVersion: 3.13.0-46-generic Date: Thu Mar 12 10:13:47 2015 InstallationDate: Installed on 2014-10-09 (153 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) PackageVersion: 331.113-0ubuntu0.0.4 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1431229/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430838] [NEW] package ffmpeg (not installed) failed to install/upgrade: zkouším přepsat soubor „/usr/bin/ffmpeg“, který je také v balíku clipgrab 3.4.8-b~utopic~NoobsLab.com
Public bug reported: ffmpeg not install ProblemType: Package DistroRelease: Ubuntu 14.10 Package: ffmpeg (not installed) ProcVersionSignature: Ubuntu 3.16.0-32.42-generic 3.16.7-ckt7 Uname: Linux 3.16.0-32-generic x86_64 ApportVersion: 2.14.7-0ubuntu8.2 AptOrdering: ffmpeg: Install ffmpeg: Configure Architecture: amd64 Date: Wed Mar 11 15:49:17 2015 DuplicateSignature: package:ffmpeg:(not installed):zkouším přepsat soubor „/usr/bin/ffmpeg“, který je také v balíku clipgrab 3.4.8-b~utopic~NoobsLab.com ErrorMessage: zkouším přepsat soubor „/usr/bin/ffmpeg“, který je také v balíku clipgrab 3.4.8-b~utopic~NoobsLab.com InstallationDate: Installed on 2014-07-10 (243 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: libav Title: package ffmpeg (not installed) failed to install/upgrade: zkouším přepsat soubor „/usr/bin/ffmpeg“, který je také v balíku clipgrab 3.4.8-b~utopic~NoobsLab.com UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: libav (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package utopic -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libav in Ubuntu. https://bugs.launchpad.net/bugs/1430838 Title: package ffmpeg (not installed) failed to install/upgrade: zkouším přepsat soubor „/usr/bin/ffmpeg“, který je také v balíku clipgrab 3.4.8-b~utopic~NoobsLab.com Status in libav package in Ubuntu: New Bug description: ffmpeg not install ProblemType: Package DistroRelease: Ubuntu 14.10 Package: ffmpeg (not installed) ProcVersionSignature: Ubuntu 3.16.0-32.42-generic 3.16.7-ckt7 Uname: Linux 3.16.0-32-generic x86_64 ApportVersion: 2.14.7-0ubuntu8.2 AptOrdering: ffmpeg: Install ffmpeg: Configure Architecture: amd64 Date: Wed Mar 11 15:49:17 2015 DuplicateSignature: package:ffmpeg:(not installed):zkouším přepsat soubor „/usr/bin/ffmpeg“, který je také v balíku clipgrab 3.4.8-b~utopic~NoobsLab.com ErrorMessage: zkouším přepsat soubor „/usr/bin/ffmpeg“, který je také v balíku clipgrab 3.4.8-b~utopic~NoobsLab.com InstallationDate: Installed on 2014-07-10 (243 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: libav Title: package ffmpeg (not installed) failed to install/upgrade: zkouším přepsat soubor „/usr/bin/ffmpeg“, který je také v balíku clipgrab 3.4.8-b~utopic~NoobsLab.com UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libav/+bug/1430838/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1130717] Re: Must exit screenshot app to take another one
This annoys me greatly also. FYI, I believe this pertains to Non-interactive mode - that is, I pressed Print Screen without specifically opening the GUI. Background: The UX expectation (from Windows) is that Print Screen simply places the screenshot into the clipboard. When Print Screen is pressed again, the previous clipboard is overwritten. A very tidy, fast UX flow. Opinion: By not directly copying to the clipboard, the user must locate the Screenshot GUI and press copy to clipboard - irritating, but I suppose that's a matter of opinion. I'd suggest that by pressing Print Screen, I intentionally avoided the GUI - I don't want it. BUG: However, if the GUI is already open, it DOES NOT refresh when I press Print Screen again. The Print Screen button is effectively disabled once the GUI is open. I have to find and close the GUI first. This behavior seems BUG worthy. This is especially irritating when the GUI is open on some other workspace, and Print Screen fails silently. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-screenshot in Ubuntu. https://bugs.launchpad.net/bugs/1130717 Title: Must exit screenshot app to take another one Status in gnome-screenshot package in Ubuntu: Confirmed Bug description: Not sure if this is really a bug, but it surely irritates me. Whenever I take a screenshot (printscreen) the Screenshot app fires up. I then copy the screenshot to my clipboard, open up gimp and do whatever i need to. After that, if I need another screenshot. I press printscreen again. This time nothing happens. I have to manually quit the Screenshot app, and printscreen it again. I would prefer the printscreen button to override the existing printscreen, regardless of whether the screenshot app is running. Regards, Rob ProblemType: BugDistroRelease: Ubuntu 12.04 Package: unity 5.18.0-0ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-37.58-generic 3.2.35 Uname: Linux 3.2.0-37-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.1 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] Date: Wed Feb 20 16:13:49 2013 EcryptfsInUse: Yes InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) MarkForUpload: TrueSourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-screenshot/+bug/1130717/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430888] [NEW] DRI_PRIME with radeon/intel windows do not draw
Public bug reported: I'm using Ubuntu 15.04 and Xorg version 1:7.7+7ubuntu2 Step to reproduce: start DRI_PRIME=1 steam (or any other complex 3D program like minecraft) What is expected: the program should show it's window(s), those should have the same content as if started without DRI_PRIME. What actually happens: most times the program just shows a freezed version of the background the window appeared on. Additional Informations: I have the newest BIOS version. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0 Uname: Linux 3.19.0-7-generic x86_64 NonfreeKernelModules: wl .tmp.unity.support.test.0: ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Wed Mar 11 17:01:13 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: bcmwl, 6.30.223.248+bdcom, 3.18.0-13-generic, x86_64: installed bcmwl, 6.30.223.248+bdcom, 3.19.0-7-generic, x86_64: installed virtualbox, 4.3.24, 3.19.0-7-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1486] Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] [1002:68e0] (rev ff) (prog-if ff) MachineType: Hewlett-Packard HP TouchSmart tm2 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-7-generic root=UUID=35d0b52c-aa5e-48d2-9eec-f7a6036f2a56 ro splash drm.rnodes=1 vt.handoff=7 SourcePackage: xorg SystemImageInfo: current build number: 0 device name: channel: daily last update: Unknown UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/18/2011 dmi.bios.vendor: Insyde dmi.bios.version: F.25 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1486 dmi.board.vendor: Hewlett-Packard dmi.board.version: 83.20 dmi.chassis.asset.tag: CNU0250216 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.25:bd02/18/2011:svnHewlett-Packard:pnHPTouchSmarttm2NotebookPC:pvr048920252A2000122:rvnHewlett-Packard:rn1486:rvr83.20:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP TouchSmart tm2 Notebook PC dmi.product.version: 048920252A2000122 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.12.1+15.04.20150303-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.59-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.0-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.0-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.16.2.901-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Tue Mar 10 10:39:26 2015 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 38164 vendor AUO xserver.version: 2:1.16.2.901-1ubuntu4 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 ubuntu vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1430888 Title: DRI_PRIME with radeon/intel windows do not draw Status in xorg package in Ubuntu: New Bug description: I'm using Ubuntu 15.04 and Xorg version 1:7.7+7ubuntu2 Step to reproduce: start DRI_PRIME=1 steam (or any other complex 3D program like minecraft) What is expected: the program should show it's window(s), those should have the same content as if started without DRI_PRIME. What actually happens: most times the program just shows a freezed version of the background the window appeared on. Additional Informations: I have the newest BIOS version. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0 Uname: Linux 3.19.0-7-generic x86_64 NonfreeKernelModules: wl .tmp.unity.support.test.0: ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Wed Mar 11
[Desktop-packages] [Bug 1424466] Re: Devel package not installable in 14.04.2 (mesa-lts-utopic
** Also affects: mesa (Ubuntu Trusty) Importance: Undecided Status: New ** Changed in: mesa (Ubuntu Trusty) Status: New = Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1424466 Title: Devel package not installable in 14.04.2 (mesa-lts-utopic Status in mesa package in Ubuntu: Confirmed Status in mesa source package in Trusty: Fix Committed Bug description: [Impact] * Some -dev packages like ubuntu-sdk and libglew-dev cannot be installed when the lts-utopic stack is used. [Test Case] * Install the lts-utopic stack. * apt-get install ubuntu-sdk * Good: you get a whole list of packages to install. * Bad: apt-get install fails like pasted in the original bug report. * Also test the same without the lts-utopic stack, to make sure there are no regressions. [Regression Potential] * Low, this has been done for precise before, and mesa packaging has to be updated for every LTS release. Unfortunately there are no alternatives. :( [Other Info] * There's probably an apt bug in here too. Nudging the resolver by specifying libgl1-mesa-dev-lts-utopic and libgles2-mesa-dev-lts-utopic works, but I didn't find a good way to express this in the depends, and that would have to be done for every package. [Original bug report] Not the first, likely not the last devel to not be installable in 14.04.2 or any mesa-lts-utopic install Another one is libglew-dev sudo apt-get install freeglut3-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libcheese-gtk23 : Depends: libclutter-gtk-1.0-0 (= 0.91.8) but it is not going to be installed Depends: libcogl15 (= 1.15.8) but it is not going to be installed libcheese7 : Depends: libclutter-gst-2.0-0 (= 0.10.0) but it is not going to be installed Depends: gstreamer1.0-clutter but it is not going to be installed libclutter-1.0-0 : Depends: libcogl-pango15 (= 1.15.8) but it is not going to be installed Depends: libcogl15 (= 1.15.8) but it is not going to be installed ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: freeglut3-dev (not installed) ProcVersionSignature: Ubuntu 3.16.0-31.41~14.04.1-generic 3.16.7-ckt5 Uname: Linux 3.16.0-31-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CurrentDesktop: Unity Date: Sun Feb 22 18:03:30 2015 InstallationDate: Installed on 2015-02-08 (14 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150203.2) SourcePackage: freeglut UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1424466/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1422096] Re: Occasionally no network on resume
Oh, in today's case lxcbr0 and virbr0 weren't listed. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1422096 Title: Occasionally no network on resume Status in network-manager package in Ubuntu: New Bug description: Sometimes I resume and n-m thinks that lxcbr0 is a connected wired network, so doesn't connect to the wireless network that I actually want to use until I restart it. laney@iota nmcli d DEVICE TYPE STATE CONNECTION lxcbr0 bridgeconnected lxcbr0 virbr0 bridgeconnected virbr0 50:46:5D:18:E7:06 btdisconnected -- wlan0 wifi disconnected -- eth0 ethernet unavailable -- lo loopback unmanaged -- virbr0-nic tap unmanaged -- laney@iota nmcli d w l ifname wlan0 * SSID MODE CHAN RATE SIGNAL BARS SECURITY laney@iota cat /etc/network/interfaces auto lo iface lo inet loopback ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu6 ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5 Uname: Linux 3.18.0-13-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.16.1-0ubuntu2 Architecture: amd64 CurrentDesktop: GNOME Date: Sun Feb 15 10:37:28 2015 IfupdownConfig: auto lo iface lo inet loopback InstallationDate: Installed on 2012-10-18 (850 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) IpRoute: default via 192.168.1.1 dev wlan0 proto static metric 1024 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.134 SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2014-07-30 (200 days ago) nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1422096/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430280] Re: NetworkManager-wait-online.service not enabled after package installation
** Changed in: network-manager (Ubuntu) Status: In Progress = Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1430280 Title: NetworkManager-wait-online.service not enabled after package installation Status in NetworkManager: Confirmed Status in console-setup package in Ubuntu: Fix Released Status in network-manager package in Ubuntu: Fix Committed Bug description: After installing NetworkManager in a fresh vivid VM, NetworkManager- wait-online.service is disabled. We should consider enabling it on systems which don't have any static interfaces in /etc/network/interfaces, so that units that need network-online.target work properly. To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1430280/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1426259] Re: Dell XPS13 regularly loses connection/becomes unusable on Intel 7260
gianluca, thank you for taking the time to report this bug and helping to make Ubuntu better. Please execute the following command, as it will automatically gather debugging information, in a terminal: apport-collect 1426259 ** This bug is no longer a duplicate of bug 1315221 8086:08b1 (rev 6b) [Dell XPS 13 9333] iwlwifi regularly loses connection/becomes unusable on Intel 7260 ** Package changed: network-manager (Ubuntu) = linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1426259 Title: Dell XPS13 regularly loses connection/becomes unusable on Intel 7260 Status in linux package in Ubuntu: Incomplete Bug description: i'm affected by the bug described here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1315221 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-46.75-generic 3.13.11-ckt15 Uname: Linux 3.13.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CurrentDesktop: Unity Date: Fri Feb 27 09:13:07 2015 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20130203-1 IfupdownConfig: auto lo iface lo inet loopback InstallationDate: Installed on 2014-10-31 (118 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20130203-13:50 IpRoute: default via 192.168.42.129 dev usb0 proto static 10.0.3.0/24 dev lxcbr0 proto kernel scope link src 10.0.3.1 192.168.42.0/24 dev usb0 proto kernel scope link src 192.168.42.20 metric 1 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: Upgraded to trusty on 2014-11-06 (112 days ago) mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2015-01-17T17:14:49.420493 nmcli-dev: DEVICE TYPE STATE DBUS-PATH usb0 802-3-ethernetconnected /org/freedesktop/NetworkManager/Devices/1 wlan0 802-11-wireless disconnected /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1426259/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220426] Re: [nvidia-prime]Freeze while using touchpad
W! It seems to be fixed, on my Utopic installation, using the X server from the deb file in post #251. Cheers guys! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1220426 Title: [nvidia-prime]Freeze while using touchpad Status in X.Org X server: Fix Released Status in xorg-server package in Ubuntu: Triaged Bug description: Using Asus N43SL laptop as an example, with nvidia-prime installed, so the dedicated NVIDIA graphics card (GT 540m) is in use, once in a while, my screen will freeze when I use my touchpad. WORKAROUND: Use USB mouse. WORKAROUND: Uninstall nvidia-prime and use integrated graphics. WORKAROUND: Do a VT switch via Ctrl+Alt+F1 then Ctrl+Alt+F7. In the attached Xorg.0.log, you can see synaptics: ETPS/2 Elantech Touchpad: touchpad found each time I did a VT switch and regained control: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1220426/+attachment/3801516/+files/Xorg.0.log The following upstream report has a patch that addresses this issue: https://bugs.freedesktop.org/show_bug.cgi?id=86288 To manage notifications about this bug go to: https://bugs.launchpad.net/xorg-server/+bug/1220426/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431012] Re: network-manager, edit connections + connect + disconnect functions are disabled
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: network-manager (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1431012 Title: network-manager, edit connections + connect + disconnect functions are disabled Status in network-manager package in Ubuntu: Confirmed Bug description: Some important functions in network-manager are grayed out: * edit connections * connect * disconnect To resolve the problem: * When i start nm-connection-editor in terminal as normal user it's possible to edit all interfaces without any problems. * When i start users-admin in terminal as normal user, press button advanced settings and enter my password, then the functions edit connections + connect + disconnect are possible to operate and not grayed any more untile a reboot! I already set my user to user-group netdev, but nothing happened. I tryed to dpkg-reconfigure network-manager and /etc/init.d/network-manager restart, but nothing happened. lsb_release -rd: Description: Ubuntu 12.04.5 LTS Release: 12.04 apt-cache policy network-manager: network-manager: Installiert: 0.9.4.0-0ubuntu4.4.1 Kandidat:0.9.4.0-0ubuntu4.4.1 Versionstabelle: *** 0.9.4.0-0ubuntu4.4.1 0 500 http://de.archive.ubuntu.com/ubuntu/ precise-updates/main i386 Packages 100 /var/lib/dpkg/status 0.9.4.0-0ubuntu3 0 500 http://de.archive.ubuntu.com/ubuntu/ precise/main i386 Packages ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: network-manager 0.9.4.0-0ubuntu4.4.1 ProcVersionSignature: Ubuntu 3.2.0-77.112-generic-pae 3.2.66 Uname: Linux 3.2.0-77-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.8 Architecture: i386 Date: Wed Mar 11 20:57:48 2015 InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) IpRoute: default via 192.168.178.1 dev eth0 proto static 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.178.0/24 dev eth0 proto kernel scope link src 192.168.178.92 metric 1 MarkForUpload: True NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2012-11-18T15:36:47 nmcli-dev: DEVICE TYPE STATE DBUS-PATH eth0 802-3-ethernetconnected /org/freedesktop/NetworkManager/Devices/1 wlan0 802-11-wireless unavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.4.0connected enabled disabled disabled enabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1431012/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431012] Re: network-manager, edit connections + connect + disconnect functions are disabled
Actually, looks like a duplicate of Bug #1424119. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1431012 Title: network-manager, edit connections + connect + disconnect functions are disabled Status in network-manager package in Ubuntu: Confirmed Bug description: Some important functions in network-manager are grayed out: * edit connections * connect * disconnect To resolve the problem: * When i start nm-connection-editor in terminal as normal user it's possible to edit all interfaces without any problems. * When i start users-admin in terminal as normal user, press button advanced settings and enter my password, then the functions edit connections + connect + disconnect are possible to operate and not grayed any more untile a reboot! I already set my user to user-group netdev, but nothing happened. I tryed to dpkg-reconfigure network-manager and /etc/init.d/network-manager restart, but nothing happened. lsb_release -rd: Description: Ubuntu 12.04.5 LTS Release: 12.04 apt-cache policy network-manager: network-manager: Installiert: 0.9.4.0-0ubuntu4.4.1 Kandidat:0.9.4.0-0ubuntu4.4.1 Versionstabelle: *** 0.9.4.0-0ubuntu4.4.1 0 500 http://de.archive.ubuntu.com/ubuntu/ precise-updates/main i386 Packages 100 /var/lib/dpkg/status 0.9.4.0-0ubuntu3 0 500 http://de.archive.ubuntu.com/ubuntu/ precise/main i386 Packages ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: network-manager 0.9.4.0-0ubuntu4.4.1 ProcVersionSignature: Ubuntu 3.2.0-77.112-generic-pae 3.2.66 Uname: Linux 3.2.0-77-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.8 Architecture: i386 Date: Wed Mar 11 20:57:48 2015 InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) IpRoute: default via 192.168.178.1 dev eth0 proto static 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.178.0/24 dev eth0 proto kernel scope link src 192.168.178.92 metric 1 MarkForUpload: True NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2012-11-18T15:36:47 nmcli-dev: DEVICE TYPE STATE DBUS-PATH eth0 802-3-ethernetconnected /org/freedesktop/NetworkManager/Devices/1 wlan0 802-11-wireless unavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.4.0connected enabled disabled disabled enabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1431012/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431278] Re: nvidia-304-updates 304.125-0ubuntu0.1: nvidia-304-updates kernel module failed to build
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-304-updates in Ubuntu. https://bugs.launchpad.net/bugs/1431278 Title: nvidia-304-updates 304.125-0ubuntu0.1: nvidia-304-updates kernel module failed to build Status in nvidia-graphics-drivers-304-updates package in Ubuntu: New Bug description: The nvidia-304-updates kernel module fails to build when installing the 4.0rc3 kernel from kernel-ppa. A solution/fix for the problem is shown at https://devtalk.nvidia.com/default/topic/813458/linux/linux-4-0-rc1-346-47-build-error-_cr4-functions-fix/post/4471335/#4471335 ProblemType: Package DistroRelease: Ubuntu 14.10 Package: nvidia-304-updates 304.125-0ubuntu0.1 [modified: usr/src/nvidia-304-updates-304.125/nv.c] Uname: Linux 3.18.7-031807-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8.2 Architecture: amd64 DKMSKernelVersion: 4.0.0-04rc3-generic Date: Thu Mar 12 10:44:31 2015 DuplicateSignature: dkms:nvidia-304-updates:304.125-0ubuntu0.1:/var/lib/dkms/nvidia-304-updates/304.125/build/nv-pat.c:38:5: error: implicit declaration of function ‘read_cr4’ [-Werror=implicit-function-declaration] InstallationDate: Installed on 2014-12-04 (97 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) PackageVersion: 304.125-0ubuntu0.1 SourcePackage: nvidia-graphics-drivers-304-updates Title: nvidia-304-updates 304.125-0ubuntu0.1: nvidia-304-updates kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-304-updates/+bug/1431278/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1418077] Re: After radio technology is changed, mobile-data takes ~5m to re-connect
So confirmed that adding a case for NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER in device_state_changed ( nm- device-modem.c ), causes the connection to be blocked from auto- connecting. I still see the initial retries decrement log message in device_state_changed ( nm-policy.c ), I mentioned this is due to the transition of the device from 'Activated' to 'Failed', it's not a new activation attempt. When this is logged( w/retries=4 ), I don't see any subsequent attempts to retry, ever. nm-policy controls the clearing of the connection's 'autoconnect_blocked_reason' ( which is what gets used in this scenario to block autoconnect ), and at the moment, nothing done by the NM ofono code is triggering the right state changes to clear the reason when 'Attached' becomes TRUE again. Nor is there a timer set, as is done when an autoconnect sequence exceeds it's retry count ( ie. the ~5m timer mentioned above ). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1418077 Title: After radio technology is changed, mobile-data takes ~5m to re-connect Status in the base for Ubuntu mobile products: In Progress Status in network-manager package in Ubuntu: In Progress Bug description: Steps to reproduce: 1. Confirm cellular data (disable wifi) 2. Change TechnologyPreference on online SIM 3. Confirm no cellular data 4. Wait ~10 minutes 5. Confirm cellular data What happens: Changing something on the modem causes cellular data to disappear for 10 minutes What should happen: It should behave as before, i.e. cellular data should come back immediately current build number: 97 device name: krillin channel: ubuntu-touch/devel-proposed alias: ubuntu-touch/vivid-proposed last update: 2015-02-02 12:48:25 version version: 97 version ubuntu: 20150202 version device: 20150128-5379bdb version custom: 20150202 To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1418077/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431031] Re: nautilus crashed with signal 5 in _XEventsQueued()
*** This bug is a duplicate of bug 963743 *** https://bugs.launchpad.net/bugs/963743 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #963743, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Attachment removed: CoreDump.gz https://bugs.launchpad.net/bugs/1431031/+attachment/4341863/+files/CoreDump.gz ** Attachment removed: Disassembly.txt https://bugs.launchpad.net/bugs/1431031/+attachment/4341865/+files/Disassembly.txt ** Attachment removed: ProcMaps.txt https://bugs.launchpad.net/bugs/1431031/+attachment/4341867/+files/ProcMaps.txt ** Attachment removed: ProcStatus.txt https://bugs.launchpad.net/bugs/1431031/+attachment/4341868/+files/ProcStatus.txt ** Attachment removed: Registers.txt https://bugs.launchpad.net/bugs/1431031/+attachment/4341869/+files/Registers.txt ** Attachment removed: Stacktrace.txt https://bugs.launchpad.net/bugs/1431031/+attachment/4341870/+files/Stacktrace.txt ** Attachment removed: ThreadStacktrace.txt https://bugs.launchpad.net/bugs/1431031/+attachment/4341871/+files/ThreadStacktrace.txt ** This bug has been marked a duplicate of private bug 963743 ** Information type changed from Private to Public ** Tags removed: need-amd64-retrace -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1431031 Title: nautilus crashed with signal 5 in _XEventsQueued() Status in nautilus package in Ubuntu: New Bug description: I tried to assign a picture that you just created in the Pinta, as a wallpaper on your desktop after restart nautilus - the picture established as wallpaper ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: nautilus 1:3.14.2-0ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-8.8-generic 3.19.1 Uname: Linux 3.19.0-8-generic x86_64 ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CrashCounter: 1 CurrentDesktop: Unity Date: Wed Mar 11 23:25:27 2015 ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-column-order' b['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 'permissions', 'mime_type', 'where'] InstallationDate: Installed on 2015-03-05 (5 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150305) ProcCmdline: nautilus -n Signal: 5 SourcePackage: nautilus StacktraceTop: ?? () from /usr/lib/x86_64-linux-gnu/libX11.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libX11.so.6 _XEventsQueued () from /usr/lib/x86_64-linux-gnu/libX11.so.6 XPending () from /usr/lib/x86_64-linux-gnu/libX11.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libgdk-3.so.0 Title: nautilus crashed with signal 5 in _XEventsQueued() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo mtime.conffile..etc.xdg.autostart.nautilus.autostart.desktop: 2015-03-05T22:46:49.143864 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1431031/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1363150] Re: [FFe] Fcitx input method integration in Unity
On Thu, Mar 12, 2015 at 06:40:03AM -, Benjamin Xiao wrote: This might be off topic, but I think this update caused fcitx to be installed on my machine so I now have an indicator on my tray. Is this supposed to be the intended effect or can I safely remove it? It's a bug, but should be filed separately. I filed it as bug #1431257. -- Iain Lane [ i...@orangesquash.org.uk ] Debian Developer [ la...@debian.org ] Ubuntu Developer [ la...@ubuntu.com ] -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1363150 Title: [FFe] Fcitx input method integration in Unity Status in Indicator keyboard: New Status in fcitx package in Ubuntu: Fix Released Status in fcitx-qimpanel package in Ubuntu: Fix Released Status in indicator-keyboard package in Ubuntu: Fix Released Status in unity-control-center package in Ubuntu: Fix Released Status in unity-settings-daemon package in Ubuntu: Fix Released Bug description: Fcitx is being included in main, but Unity lacks support for it in various ways: - The Text Entry panel in unity-control-center has no effect on Fcitx' engine list - Per-window source options in Text Entry panel don't affect Fcitx - Fcitx engines (specifically for keyboard layout) are not available under unity-greeter - Fcitx indicator isn't available under the lock screen, only indicator-keyboard - Keyboard layout switching shortcut behaviour provided by Unity and unity-settings-daemon doesn't change Fcitx' current IM - Fcitx indicator is missing some options that are normally provided by indicator-keyboard - Running indicator-keyboard and Fcitx concurrently is redundant as indicator-keyboard only works with Xkb layouts and IBus IMs Some of the changes we need: - Add support for Fcitx input sources to unity-settings-daemon, unity-control-center, indicator-keyboard - Customize the Fcitx indicator under Unity to show some menu options that are available in indicator-keyboard (already merged upstream) - Hide indicator-keyboard in the session when Fcitx' indicator is visible - Add D-Bus property to Fcitx API for the current IM, so that we can detect when the user changes the current IM in the Fcitx indicator, and update the current input source accordingly (already merged upstream) - Use indicator-keyboard icons for keyboard layouts in Fcitx and fcitx-qimpanel when running under Unity We have a PPA that includes most of the proposed changes. It is available at https://launchpad.net/~fcitx-team/+archive/ubuntu/fcitx- transition. It does not hide indicator-keyboard in the session yet, as having both indicators visible is helpful for testing purposes. To manage notifications about this bug go to: https://bugs.launchpad.net/indicator-keyboard/+bug/1363150/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1022723] Re: gnome-contacts crashed with SIGSEGV in g_menu_model_get_n_items()
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: gnome-contacts (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-contacts in Ubuntu. https://bugs.launchpad.net/bugs/1022723 Title: gnome-contacts crashed with SIGSEGV in g_menu_model_get_n_items() Status in gnome-contacts package in Ubuntu: Confirmed Bug description: Just started gnome-contacts, to add a new contact and it crashed. ProblemType: Crash DistroRelease: Ubuntu 12.10 Package: gnome-contacts 3.5.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-3.3-generic 3.5.0-rc5 Uname: Linux 3.5.0-3-generic x86_64 ApportVersion: 2.3-0ubuntu2 Architecture: amd64 Date: Mon Jul 9 22:14:48 2012 ExecutablePath: /usr/bin/gnome-contacts InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120403) ProcCmdline: gnome-contacts -i 666cae5ce7f69817662c46e96e5c72de5631b3a9 ProcEnviron: PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x7f716ea6bd90 g_menu_model_get_n_items: mov (%rdi),%rax PC (0x7f716ea6bd90) ok source (%rdi) (0x) not located in a known VMA region (needed readable region)! destination %rax ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: gnome-contacts StacktraceTop: g_menu_model_get_n_items () from /usr/lib/x86_64-linux-gnu/libgio-2.0.so.0 ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0 ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0 ?? () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit_valist () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: gnome-contacts crashed with SIGSEGV in g_menu_model_get_n_items() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-contacts/+bug/1022723/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431276] [NEW] Libreoffice writer crashes when opening odt file
Public bug reported: After upgrading to vivid and LO4.4, writer will consistently crash on opening a specific file. strace attached ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libreoffice-writer 1:4.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1 Uname: Linux 3.19.0-9-generic x86_64 ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Thu Mar 12 11:47:50 2015 InstallationDate: Installed on 2014-12-13 (88 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: libreoffice UpgradeStatus: Upgraded to vivid on 2015-03-09 (2 days ago) ** Affects: libreoffice (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1431276 Title: Libreoffice writer crashes when opening odt file Status in libreoffice package in Ubuntu: New Bug description: After upgrading to vivid and LO4.4, writer will consistently crash on opening a specific file. strace attached ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libreoffice-writer 1:4.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1 Uname: Linux 3.19.0-9-generic x86_64 ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Thu Mar 12 11:47:50 2015 InstallationDate: Installed on 2014-12-13 (88 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: libreoffice UpgradeStatus: Upgraded to vivid on 2015-03-09 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1431276/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431276] Re: Libreoffice writer crashes when opening odt file
** Attachment added: strace obtained via strace -o /tmp/strace.log -f -tt -s 512 libreoffice Public/AXS_DroitsAcces.odt https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1431276/+attachment/4342610/+files/strace.log.bz2 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1431276 Title: Libreoffice writer crashes when opening odt file Status in libreoffice package in Ubuntu: New Bug description: After upgrading to vivid and LO4.4, writer will consistently crash on opening a specific file. strace attached ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libreoffice-writer 1:4.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1 Uname: Linux 3.19.0-9-generic x86_64 ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Thu Mar 12 11:47:50 2015 InstallationDate: Installed on 2014-12-13 (88 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: libreoffice UpgradeStatus: Upgraded to vivid on 2015-03-09 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1431276/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431289] [NEW] [15.04] need upgrading to 3.14 at least
Public bug reported: Vivid archive still have that oldish 3.8.2 version. It should be nice to get the 3.14 version at least, to get rid of the very old gnome packages. ** Affects: baobab (Ubuntu) Importance: Undecided Status: New ** Tags: bot-stop-nagging vivid ** Tags added: bot-stop-nagging vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to baobab in Ubuntu. https://bugs.launchpad.net/bugs/1431289 Title: [15.04] need upgrading to 3.14 at least Status in baobab package in Ubuntu: New Bug description: Vivid archive still have that oldish 3.8.2 version. It should be nice to get the 3.14 version at least, to get rid of the very old gnome packages. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/baobab/+bug/1431289/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431288] [NEW] [15.04] Needs upgrading to 3.14 at least
Public bug reported:
Vivid archive is at the oldish 3.8.1 version
why that package is not yet upgraded to 3.14 at least ?
hopes to get newer packages replacing the very old gnome packages
** Affects: vino (Ubuntu)
Importance: Undecided
Status: New
** Tags: bot-stop-nagging vivid
** Tags added: bot-stop-nagging vivid
** Description changed:
Vivid archive is at the oldish 3.8.1 version
why that package is not yet upgraded to 3.14 at least ?
+ hopes to get newer packages replacing the very old gnome packages
** Summary changed:
- {15.04] Needs upgrading to 3.14 at least
+ [15.04] Needs upgrading to 3.14 at least
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to vino in Ubuntu.
https://bugs.launchpad.net/bugs/1431288
Title:
[15.04] Needs upgrading to 3.14 at least
Status in vino package in Ubuntu:
New
Bug description:
Vivid archive is at the oldish 3.8.1 version
why that package is not yet upgraded to 3.14 at least ?
hopes to get newer packages replacing the very old gnome packages
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/vino/+bug/1431288/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431276] Re: Libreoffice writer crashes when opening odt file
Please attach the offending file. ** Changed in: libreoffice (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1431276 Title: Libreoffice writer crashes when opening odt file Status in libreoffice package in Ubuntu: Incomplete Bug description: After upgrading to vivid and LO4.4, writer will consistently crash on opening a specific file. strace attached ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libreoffice-writer 1:4.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1 Uname: Linux 3.19.0-9-generic x86_64 ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Thu Mar 12 11:47:50 2015 InstallationDate: Installed on 2014-12-13 (88 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: libreoffice UpgradeStatus: Upgraded to vivid on 2015-03-09 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1431276/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431301] [NEW] goutputstreem files generated one file occupies 5gb place
Public bug reported: i noticed the bug in home directory and the size of the files shows o when i verified my second drive where i store my softwarefile iso s i notice the same goutput stream file which occupies 5gb now i kept them all in trash file what is this and how to overcome from this problem ( iam using 14.04 lts and in my vertual box i am using window ultimate 7 and android kitkat 4.4 and windows xp venkatesh ** Affects: lightdm (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1431301 Title: goutputstreem files generated one file occupies 5gb place Status in lightdm package in Ubuntu: New Bug description: i noticed the bug in home directory and the size of the files shows o when i verified my second drive where i store my softwarefile iso s i notice the same goutput stream file which occupies 5gb now i kept them all in trash file what is this and how to overcome from this problem ( iam using 14.04 lts and in my vertual box i am using window ultimate 7 and android kitkat 4.4 and windows xp venkatesh To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1431301/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1169371] Re: GDBus.Error:org.gnome.OnlineAccounts.Error.NotAuthorized
** Changed in: evolution Status: New = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/1169371 Title: GDBus.Error:org.gnome.OnlineAccounts.Error.NotAuthorized Status in The Evolution Mail Calendaring Tool: Expired Status in evolution package in Ubuntu: Confirmed Bug description: This error occurred following my upgrade to 13.04B2 from 12.10. Upon loading evolution the error appears in the terminal window (relevant lines shown below with email obfuscated). A similar error message appears in Evolution above the message list, and in the preview area of emails that are cached from the last successful connection prior to the upgrade. Removing the account from Online Accounts appears to have no action. After removing, the account is still active in evolution (but not deletable from Evolution Preferences, marked as an online account with an icon). Previously, the account would disappear from Evolution when removed from Online Accounts. Re-Adding the account to Online Accounts appeared to have no impact. (evolution:6690): evolution-mail-WARNING **: Failed to refresh folder: folder://1359550714.3722.1%40imachp/INBOX: GDBus.Error:org.gnome.OnlineAccounts.Error.NotAuthorized: Did not find password with username `x...@.xxx' in credentials (evolution:6690): evolution-mail-WARNING **: Failed to refresh folder: folder://1359550714.3722.1%40imachp/INBOX: GDBus.Error:org.gnome.OnlineAccounts.Error.NotAuthorized: Did not find password with username `x...@.xxx' in credentials ** (evolution:6690): WARNING **: search_address_in_addressbooks: Unable to open addressbook 'Contacts': Cannot open book: GDBus.Error:org.gnome.OnlineAccounts.Error.NotAuthorized: Did not find password with username `x...@.xxx' in credentials ^C ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: evolution 3.6.4-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-18.28-generic 3.8.6 Uname: Linux 3.8.0-18-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Mon Apr 15 20:33:42 2013 MarkForUpload: True SourcePackage: evolution UpgradeStatus: Upgraded to raring on 2013-04-13 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/evolution/+bug/1169371/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1195911] Re: ssh: Received disconnect from xx.yy.zz.aa: 2: Too many authentication failures for XXXX
** Changed in: gnome-keyring Status: Unknown = Confirmed ** Changed in: gnome-keyring Importance: Unknown = Medium -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-keyring in Ubuntu. https://bugs.launchpad.net/bugs/1195911 Title: ssh: Received disconnect from xx.yy.zz.aa: 2: Too many authentication failures for Status in GNOME keyring services: Confirmed Status in gnome-keyring package in Ubuntu: Triaged Bug description: When trying to connect using ssh, I get this error: Received disconnect from xx.yy.zz.aa: 2: Too many authentication failures for It appears that for some reason Lubuntu's agent somehow arbitrarily pulls in some keys and, despite not being asked to, tries to use them for authentication and won't let me try the password. If I list the keys in the agent (ssh-add -L) then it lists a bunch of public keys, none of which I put there, none of which should be there. If anything there should be private keys in the agent. If I remove the keys (ssh-add -D) then they are still there when I check again. Looking at the output for the server, it looks like it keeps trying keys until the max limit for failed logins is reached. The problem can be made to go away by uninstalling gnome-keyring and rebooting or by clearing ~/.ssh/ of keys. The problem can be created by adding 6 or more keys to ~/.ssh/ and then trying to connect with ssh, say to localhost. cd ~/.ssh/ ssh 127.0.0.1 ssh-keygen -P '' -f test_key_1 ssh-keygen -P '' -f test_key_2 ssh-keygen -P '' -f test_key_3 ssh-keygen -P '' -f test_key_4 ssh-keygen -P '' -f test_key_5 ssh 127.0.0.1 ssh-keygen -P '' -f test_key_6 ssh 127.0.0.1 rm test_key_6 ssh 127.0.0.1 I'm not sure if this is a security vulnerability. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gnome-keyring 3.8.2-0ubuntu3 ProcVersionSignature: Ubuntu 3.9.0-7.15-generic 3.9.7 Uname: Linux 3.9.0-7-generic x86_64 ApportVersion: 2.10.2-0ubuntu2 Architecture: amd64 Date: Sat Jun 29 00:52:05 2013 InstallationDate: Installed on 2013-06-21 (7 days ago) InstallationMedia: Lubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130620) MarkForUpload: True SourcePackage: gnome-keyring UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-keyring/+bug/1195911/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 584632]
Please confirm that you are happy to change FF's behaviour to be like Chrome, Opera and Safari. I read the last section of your comment (quote: ... Good luck!) as a confirmation, but before you were rather careful saying (1): If they all agree on putting the selection where I described above (...) then we can look into changing our code and (2) it's clear that the exiting engines don't all agree on a single behavior, which means that my original idea may turn out to be incompatible with the Web. :/ Regarding the first statement: They don't all agree, FF and IE differ, but if FF moved into the Chrome camp, only IE would be left. And who knows what the new Spartan browser will do. Regarding the second statement: I thought the original idea from comment #22 was to move the selection into the text: My suspicion is that place is outside of the element that has the respective style for the font set. We should probably look into normalizing the selection in those cases to be inside the said element Also in comment #50 you said: As I said in comment 22, we should probably look into normalizing the selection, so that if the line ends in an inline frame containing a text frame, we should put the selection at the end of the text frame as opposed to at the end of the inline frame terminating the line. I'm not sure how that would be (quote) incompatible with the Web. Once I have your confirmation I will go ahead. For me, this is the single most annoying bug in Thunderbird which after 10 years should finally be resolved. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/584632 Title: composer changes font mid email Status in Mozilla Thunderbird Mail and News: Confirmed Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird As I'm typing my emails in Thunderbird, I can see what appears to be a font size change on screen, normally in the second line of text. The second line appear smaller than the first. It's barely perceptible, so half them time I think I am imagining it. Well, I've started Bccing to myself to check, and the emails I am receiving from myself are not only a different size, they're also a different font. Composer starts in some default serif, and by the second line is sans. I'd bee glad to email someone viz thunderbird, and also send along a screenshot of how it looks while I am typing. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/584632/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 584632]
I've done a little debugging. On every mouse move event we get this: Entering PresShell::HandleEvent, frame=06EA9488 PresShell::HandleEvent calling nsLayoutUtils::GetEventCoordinatesRelativeTo PresShell::HandleEvent calling FindFrameTargetedByInputEvent PresShell::HandleEvent assigning frame = target, frame=1DD7F010 === about to call HandlePositionedEvent, frame=1DD7F010 === in PresShell::HandlePositionedEvent, mCurrentEventContent/Frame=0D066380/1DD7F010 Leaving PresShell::HandleEvent right after HandlePositionedEvent (BTW, none of the frame numbers change when you move the cursor around. Unless you reload the page, they are always the same numbers). Surely somewhere in there it works out what is under the cursor, since when the cursor is over a link, things happen (cursor changes, link target is displayed). Sadly, I haven't yet found that code. If the button is clicked and released, we additionally get calls to HandlePress and HandleRelease Entering PresShell::HandleEvent, frame=06EA9488 PresShell::HandleEvent calling nsLayoutUtils::GetEventCoordinatesRelativeTo PresShell::HandleEvent calling FindFrameTargetedByInputEvent PresShell::HandleEvent assigning frame = target, frame=1DD7F010 === about to call HandlePositionedEvent, frame=1DD7F010 === in PresShell::HandlePositionedEvent, mCurrentEventContent/Frame=0D066380/1DD7F010 === in nsFrame::HandlePress Leaving PresShell::HandleEvent right after HandlePositionedEvent Entering PresShell::HandleEvent, frame=06EA9488 PresShell::HandleEvent calling nsLayoutUtils::GetEventCoordinatesRelativeTo PresShell::HandleEvent calling FindFrameTargetedByInputEvent PresShell::HandleEvent assigning frame = target, frame=1DD7F010 === about to call HandlePositionedEvent, frame=1DD7F010 === in PresShell::HandlePositionedEvent, mCurrentEventContent/Frame=0D066380/1DD7F010 === in nsFrame::HandleRelease Leaving PresShell::HandleEvent right after HandlePositionedEvent Here is the stack from the HandlePress call: nsFrame::HandlePress(args) Line 2776C++ nsFrame::HandleEvent(args) Line 2562C++ nsPresShellEventCB::HandleEvent(args) Line 507C++ mozilla::EventTargetChainItem::HandleEventTargetChain(args) Line 346C++ mozilla::EventDispatcher::Dispatch(args) Line 634C++ PresShell::DispatchEventToDOM(args) Line 8168C++ PresShell::HandleEventInternal(args) Line 8064C++ PresShell::HandlePositionedEvent(args) Line 7896C++ PresShell::HandleEvent(args) Line 7689C++ As I said before, GetSelectionClosestFrameForLine is not called. The following statements I placed into the corresponding functions in nsFrame.cpp are not reached: printf (=== in GetSelectionClosestFrameForLine\n); printf (=== in GetSelectionClosestFrameForBlock\n); printf (=== in GetSelectionClosestFrame\n); printf (=== in nsIFrame::GetContentOffsetsFromPoint\n); So the idea of discarding the BRFrame in GetSelectionClosestFrameForLine is perhaps not viable. Further suggestions appreciated. I'd really like to find the code that identifies the element under the cursor. Also, is there a way to dump out/print these data structures? How do you print an nsIFrame or an nsBlockFrame? Also, please answer the first question in comment #60 which suggested to not change the selected frame but to tweak the type in state like IE does. IE selects the DIV, but typing happens in the font of the preceding text element in the line. That may be an alternate way to fix the lost font problem that doesn't change existing selection behaviour. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/584632 Title: composer changes font mid email Status in Mozilla Thunderbird Mail and News: Confirmed Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird As I'm typing my emails in Thunderbird, I can see what appears to be a font size change on screen, normally in the second line of text. The second line appear smaller than the first. It's barely perceptible, so half them time I think I am imagining it. Well, I've started Bccing to myself to check, and the emails I am receiving from myself are not only a different size, they're also a different font. Composer starts in some default serif, and by the second line is sans. I'd bee glad to email someone viz thunderbird, and also send along a screenshot of how it looks while I am typing. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/584632/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 584632]
(In reply to Jorg K from comment #57) Please confirm that you are happy to change FF's behaviour to be like Chrome, Opera and Safari. I read the last section of your comment (quote: ... Good luck!) as a confirmation, but before you were rather careful saying (1): If they all agree on putting the selection where I described above (...) then we can look into changing our code and (2) it's clear that the exiting engines don't all agree on a single behavior, which means that my original idea may turn out to be incompatible with the Web. :/ I cannot predict how this change will pan out in the wild before we try it. It may very well be that we try this approach and it turns out that it breaks existing Web pages in a way that would cause us to revert the fix. It is only by trying this out that we can know for sure. Regarding the first statement: They don't all agree, FF and IE differ, but if FF moved into the Chrome camp, only IE would be left. And who knows what the new Spartan browser will do. Well, what I meant was that the browsers do not have a consistent behavior here, so it could be that some websites are relying on Gecko's exact behavior here somehow. But like I said it's impossible to predict. Regarding the second statement: I thought the original idea from comment #22 was to move the selection into the text: My suspicion is that place is outside of the element that has the respective style for the font set. We should probably look into normalizing the selection in those cases to be inside the said element Also in comment #50 you said: As I said in comment 22, we should probably look into normalizing the selection, so that if the line ends in an inline frame containing a text frame, we should put the selection at the end of the text frame as opposed to at the end of the inline frame terminating the line. I'm not sure how that would be (quote) incompatible with the Web. Once I have your confirmation I will go ahead. For me, this is the single most annoying bug in Thunderbird which after 10 years should finally be resolved. This affects more than just Thunderbird, and concerns behavior that is visible to Web pages. Web content can rely on the behavior of the engine in a lot of ways, for example by expecting that Firefox puts the selection somewhere specific when you go to the end of line. This is one of the reasons why fixing this bug is very difficult. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/584632 Title: composer changes font mid email Status in Mozilla Thunderbird Mail and News: Confirmed Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird As I'm typing my emails in Thunderbird, I can see what appears to be a font size change on screen, normally in the second line of text. The second line appear smaller than the first. It's barely perceptible, so half them time I think I am imagining it. Well, I've started Bccing to myself to check, and the emails I am receiving from myself are not only a different size, they're also a different font. Composer starts in some default serif, and by the second line is sans. I'd bee glad to email someone viz thunderbird, and also send along a screenshot of how it looks while I am typing. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/584632/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 584632]
It's not going past static FrameTarget GetSelectionClosestFrameForLine () http://mxr.mozilla.org/mozilla-central/source/layout/generic/nsFrame.cpp#3540 ... nor static FrameTarget GetSelectionClosestFrameForBlock nor static FrameTarget GetSelectionClosestFrame. Also, very little processing in nsFrame::HandlePress. As I said before, leaving there at line 2819: http://mxr.mozilla.org/mozilla-central/source/layout/generic/nsFrame.cpp#2819 These functions fire when you hover over or click into the URL field (or the search box), but NOT the rendered HTML. I'm not afraid of a large C++ code base, but I need a place to start. As I said, five minutes of your time can possibly save me five hours or five days of reverse engineering. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/584632 Title: composer changes font mid email Status in Mozilla Thunderbird Mail and News: Confirmed Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird As I'm typing my emails in Thunderbird, I can see what appears to be a font size change on screen, normally in the second line of text. The second line appear smaller than the first. It's barely perceptible, so half them time I think I am imagining it. Well, I've started Bccing to myself to check, and the emails I am receiving from myself are not only a different size, they're also a different font. Composer starts in some default serif, and by the second line is sans. I'd bee glad to email someone viz thunderbird, and also send along a screenshot of how it looks while I am typing. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/584632/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1322784]
I added this change to the patches directory: https://hg.mozilla.org/integration/mozilla-inbound/rev/99814e9730de -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1322784 Title: Firefox crashes in flag_qsort during spellchecker initialization on x86 due to gcc bug Status in The Mozilla Firefox Browser: Fix Released Status in firefox package in Ubuntu: Confirmed Status in gcc-4.8 package in Ubuntu: Incomplete Bug description: The most common Firefox crash on Linux in Mozilla's crash-stats system is crashes in the function flag_qsort. These crashes occur: * only on x86 architecture * only on Ubuntu packages (and not on Mozilla's builds) * on precise and saucy and trusty (based on kernel versions reported with the crashes) and appear to be due to a compiler bug in the compiler used to generate Ubuntu's builds. (It could be a common compiler bug triggered by different compiler options or a compiler bug specific to Ubuntu's gcc.) The analysis that leads to the conclusion that this is a compiler bug is in https://bugzilla.mozilla.org/show_bug.cgi?id=983817 . In particular, the compiler is miscompiling an access to an element of an array of unsigned short as a 32-bit read, and when the unsigned short in question is the last one in the allocation and that allocation is aligned so that the byte following has a different 0x10 bit, this can lead to crashes. The most recent (whenever you follow the link) 7 days of crash reports are available at: https://crash- stats.mozilla.com/report/list?signature=flag_qsortproduct=Firefoxquery_type=containsrange_unit=weeks To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1322784/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1322784]
For the record, flag_qsort is not present in: https://crash-stats.mozilla.com/topcrasher/products/Firefox/versions/36.0.1/date_range_type/report/crash_type/browser/os_name/Linux/result_count/50?days=7 so this seems to have worked. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1322784 Title: Firefox crashes in flag_qsort during spellchecker initialization on x86 due to gcc bug Status in The Mozilla Firefox Browser: Fix Released Status in firefox package in Ubuntu: Confirmed Status in gcc-4.8 package in Ubuntu: Incomplete Bug description: The most common Firefox crash on Linux in Mozilla's crash-stats system is crashes in the function flag_qsort. These crashes occur: * only on x86 architecture * only on Ubuntu packages (and not on Mozilla's builds) * on precise and saucy and trusty (based on kernel versions reported with the crashes) and appear to be due to a compiler bug in the compiler used to generate Ubuntu's builds. (It could be a common compiler bug triggered by different compiler options or a compiler bug specific to Ubuntu's gcc.) The analysis that leads to the conclusion that this is a compiler bug is in https://bugzilla.mozilla.org/show_bug.cgi?id=983817 . In particular, the compiler is miscompiling an access to an element of an array of unsigned short as a 32-bit read, and when the unsigned short in question is the last one in the allocation and that allocation is aligned so that the byte following has a different 0x10 bit, this can lead to crashes. The most recent (whenever you follow the link) 7 days of crash reports are available at: https://crash- stats.mozilla.com/report/list?signature=flag_qsortproduct=Firefoxquery_type=containsrange_unit=weeks To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1322784/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1322784]
https://hg.mozilla.org/mozilla-central/rev/99814e9730de -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1322784 Title: Firefox crashes in flag_qsort during spellchecker initialization on x86 due to gcc bug Status in The Mozilla Firefox Browser: Fix Released Status in firefox package in Ubuntu: Confirmed Status in gcc-4.8 package in Ubuntu: Incomplete Bug description: The most common Firefox crash on Linux in Mozilla's crash-stats system is crashes in the function flag_qsort. These crashes occur: * only on x86 architecture * only on Ubuntu packages (and not on Mozilla's builds) * on precise and saucy and trusty (based on kernel versions reported with the crashes) and appear to be due to a compiler bug in the compiler used to generate Ubuntu's builds. (It could be a common compiler bug triggered by different compiler options or a compiler bug specific to Ubuntu's gcc.) The analysis that leads to the conclusion that this is a compiler bug is in https://bugzilla.mozilla.org/show_bug.cgi?id=983817 . In particular, the compiler is miscompiling an access to an element of an array of unsigned short as a 32-bit read, and when the unsigned short in question is the last one in the allocation and that allocation is aligned so that the byte following has a different 0x10 bit, this can lead to crashes. The most recent (whenever you follow the link) 7 days of crash reports are available at: https://crash- stats.mozilla.com/report/list?signature=flag_qsortproduct=Firefoxquery_type=containsrange_unit=weeks To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1322784/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 584632]
From someone who is 1% knowledgeable on this stuff... since the problem is that the cursor is returned, after clicking outside on the line being returned to, to a place outside the last (hidden) tag...which I have always seen to be / font...could you not simply detect if that tag existed and place the cursor just before it? For me, this is the single most annoying bug in Thunderbird which after 10 years should finally be resolved. AMEN, and thank you so much for working on it. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/584632 Title: composer changes font mid email Status in Mozilla Thunderbird Mail and News: Confirmed Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird As I'm typing my emails in Thunderbird, I can see what appears to be a font size change on screen, normally in the second line of text. The second line appear smaller than the first. It's barely perceptible, so half them time I think I am imagining it. Well, I've started Bccing to myself to check, and the emails I am receiving from myself are not only a different size, they're also a different font. Composer starts in some default serif, and by the second line is sans. I'd bee glad to email someone viz thunderbird, and also send along a screenshot of how it looks while I am typing. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/584632/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 584632]
Created attachment 8576320 A more comprehensive text The more conservative approach would be not to change the selection behaviour but to maintain/re-establish the correct type in state after the click. That is what IE does: The DIV is selected, but typing continues in the correct font, see comment #54. Would you prefer this approach? One could argue that clicking 10cm or 4 away from the text to the right should not select the text. On the other hand, if no br follows, then you can click far to the right and the text is still selected. Also for text in p/p you can click far to the right and still select the text. Note that links are not followed, even though the text is selected. That's the last example. Personally I would fire any web designer who creates websites for one browser alone and who creates special code for somewhat far-fetched cases of clicking a text. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/584632 Title: composer changes font mid email Status in Mozilla Thunderbird Mail and News: Confirmed Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird As I'm typing my emails in Thunderbird, I can see what appears to be a font size change on screen, normally in the second line of text. The second line appear smaller than the first. It's barely perceptible, so half them time I think I am imagining it. Well, I've started Bccing to myself to check, and the emails I am receiving from myself are not only a different size, they're also a different font. Composer starts in some default serif, and by the second line is sans. I'd bee glad to email someone viz thunderbird, and also send along a screenshot of how it looks while I am typing. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/584632/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 584632]
Created attachment 8576184 Alternate test, take 2, dumping out more info Results: FF: start=DIV(2) - end=DIV(2) IE 10 and 11 (current): start=DIV(2) - end=DIV(2) Chrome 41 (current): start=#text(10) - end=#text(10) Opera 28 (current): start=#text(10) - end=#text(10) Safari 5.1.7 (old): start=#text(10) - end=#text(10) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/584632 Title: composer changes font mid email Status in Mozilla Thunderbird Mail and News: Confirmed Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird As I'm typing my emails in Thunderbird, I can see what appears to be a font size change on screen, normally in the second line of text. The second line appear smaller than the first. It's barely perceptible, so half them time I think I am imagining it. Well, I've started Bccing to myself to check, and the emails I am receiving from myself are not only a different size, they're also a different font. Composer starts in some default serif, and by the second line is sans. I'd bee glad to email someone viz thunderbird, and also send along a screenshot of how it looks while I am typing. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/584632/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 584632]
(In reply to Jorg K from comment #51) Sadly I don't understand some of what you wrote. Let me see what I understood. You're saying you want to check how other rendering engines behave. I ran the test from comment #37 on Chrome and IE. Both continue text entry with the font present on the first line, so their behaviour is what I would expect. That's not what I asked. I want to know where they put the selection. Attachment 8575104 kind of does that but I was hoping to get the offsets as well, but with the results in comment 54, it's clear that the exiting engines don't all agree on a single behavior, which means that my original idea may turn out to be incompatible with the Web. :/ What versions of these browsers did you test? What about Safari? Note that whether or not other engines have this bug is not relevant. Next you talk about test cases where you click and dump out the selection. In this case, we do a single click, so the selection will have one collapsed range. I don't know which property of the Selection or Range you want to inspect, maybe selRange.[start|end]Container.nodeName. Yeah, startContainer and endContainer, plus startOffset and endOffset. I've stripped down the so-called Midas demo and added some information about the clicking when carrying out the text case from comment #37. Result: FF: BODY, continues in the wrong font. Chrome: #text, continues with the correct font. IE: #text if you used enter between the lines, or BODY if you used shiftenter, continues with correct font in both cases. Let me know what to do next. And please, clear instructions ;-) The first step is to read and understand how GetContentOffsetsFromPoint() works, specifically the call to GetSelectionClosestFrame(), which is the function that decides what frame is marked as selected ultimately when a given frame receives a click event. For example in attachment 8575104 if you click to the right of the first line, we get to GetSelectionClosestFrameForLine() selecting the BRFrame at the end of the first line. Now, if we want to collapse the selection to the text frame, it means that we need to skip the BRFrame. So you should modify that logic to ignore BRFrame's if there is anything else on the same line before them (i.e., if there is something that we haven't yet looked at through the line iterator.) Then you should verify that the change actually makes us collapse the selection at the end of the text frame (so for example startContainer and endContainer should both be the text node and startOffset/endOffset should both be 10 depending on the length of the text frame). Then you should post the change to the try server and see what existing tests fail, and debug them to figure out why. There will be two classes of test failures, one for tests that are relying on the specific behavior we're changing here, so you should adjust those tests accordingly. Another set of test failures will hopefully catch the edge cases that we have not thought very carefully about yet. We should probably discuss the test failures once you get to that stage. Beware that this will probably be a lengthy process and it requires a lot of debugging skills and also being comfortable finding your way across a large C++ code base. Good luck! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/584632 Title: composer changes font mid email Status in Mozilla Thunderbird Mail and News: Confirmed Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird As I'm typing my emails in Thunderbird, I can see what appears to be a font size change on screen, normally in the second line of text. The second line appear smaller than the first. It's barely perceptible, so half them time I think I am imagining it. Well, I've started Bccing to myself to check, and the emails I am receiving from myself are not only a different size, they're also a different font. Composer starts in some default serif, and by the second line is sans. I'd bee glad to email someone viz thunderbird, and also send along a screenshot of how it looks while I am typing. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/584632/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316090] LightdmGreeterLog.txt
apport information ** Attachment added: LightdmGreeterLog.txt https://bugs.launchpad.net/bugs/1316090/+attachment/4342793/+files/LightdmGreeterLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1316090 Title: Unable to drop/ place files and links on second screen in dual screen set up Status in xorg package in Ubuntu: Incomplete Bug description: After updating from Xubuntu 13.10 (amd64) to Xubuntu 14.04 LTS (amd64) I have encountered a bug with my dual screen set up. Running the XOrg screen driver (xserver-xorg-video-nouveau), it is possible to place/ drag and drop files and links on my left screen desktop. This is also the desktop that contains the system icons (e.g. removable drives, rubbish bin). However, I I try to drag and drop a file or link on the right screen desktop, it will not stick and fly back to its original location on the left screen. Additionally, I noticed that, when dragging the file over the troubled desktop, the placement squares don't show up. They do on the functioning left screen. Although I have a NVIDIA Corporation GK107 [GeForce GTX 650] Geforce I do run the XOrg driver since it gives me the best results with the software I'm using frequently. However, when I tested this during my initial install of Trusty, I noticed that I did not encounter this bug with the proprietary NVidia 304.117 driver (331.38 did not work for me at all). Running the NVidia 304.117 driver, it was possible to drag and drop/ place files and links on both screen desktops. Also the placement squares appeared on both screens when a file was dragged over it. After returning to the XOrg driver, the problem reoccurred, and placement on the right screen was again not possible. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: XFCE DistUpgraded: Fresh install DistroCodename: trusty DistroRelease: Ubuntu 14.04 DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:3553] InstallationDate: Installed on 2014-04-22 (323 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1648): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/at-spi2-core/at-spi-bus-launcher: Success ** (lightdm-gtk-greeter:1648): WARNING **: Failed to run at-spi-bus-launcher: Failed to execute child process /usr/lib/at-spi2-core/at-spi-bus-launcher (No such file or directory) init: indicator-application main process (1682) terminated with status 1 MachineType: Dell Inc. Vostro 420 Series Package: xorg 1:7.7+1ubuntu8.1 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=c073855c-9065-4cc1-95c7-c3166a57d5a1 ro persistent quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15 Tags: trusty ubuntu Uname: Linux 3.13.0-46-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/22/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.3.0 dmi.board.name: 0R038D dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.3.0:bd06/22/2010:svnDellInc.:pnVostro420Series:pvr:rvnDellInc.:rn0R038D:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Vostro 420 Series dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Mar 12 13:58:37 2015 xserver.configfile: default xserver.errors: Failed to load module nvidia (module does not exist, 0) Failed to load module nvidia (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: nouveau To manage notifications
[Desktop-packages] [Bug 1316090] DpkgLog.txt
apport information ** Attachment added: DpkgLog.txt https://bugs.launchpad.net/bugs/1316090/+attachment/4342791/+files/DpkgLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1316090 Title: Unable to drop/ place files and links on second screen in dual screen set up Status in xorg package in Ubuntu: Incomplete Bug description: After updating from Xubuntu 13.10 (amd64) to Xubuntu 14.04 LTS (amd64) I have encountered a bug with my dual screen set up. Running the XOrg screen driver (xserver-xorg-video-nouveau), it is possible to place/ drag and drop files and links on my left screen desktop. This is also the desktop that contains the system icons (e.g. removable drives, rubbish bin). However, I I try to drag and drop a file or link on the right screen desktop, it will not stick and fly back to its original location on the left screen. Additionally, I noticed that, when dragging the file over the troubled desktop, the placement squares don't show up. They do on the functioning left screen. Although I have a NVIDIA Corporation GK107 [GeForce GTX 650] Geforce I do run the XOrg driver since it gives me the best results with the software I'm using frequently. However, when I tested this during my initial install of Trusty, I noticed that I did not encounter this bug with the proprietary NVidia 304.117 driver (331.38 did not work for me at all). Running the NVidia 304.117 driver, it was possible to drag and drop/ place files and links on both screen desktops. Also the placement squares appeared on both screens when a file was dragged over it. After returning to the XOrg driver, the problem reoccurred, and placement on the right screen was again not possible. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: XFCE DistUpgraded: Fresh install DistroCodename: trusty DistroRelease: Ubuntu 14.04 DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:3553] InstallationDate: Installed on 2014-04-22 (323 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1648): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/at-spi2-core/at-spi-bus-launcher: Success ** (lightdm-gtk-greeter:1648): WARNING **: Failed to run at-spi-bus-launcher: Failed to execute child process /usr/lib/at-spi2-core/at-spi-bus-launcher (No such file or directory) init: indicator-application main process (1682) terminated with status 1 MachineType: Dell Inc. Vostro 420 Series Package: xorg 1:7.7+1ubuntu8.1 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=c073855c-9065-4cc1-95c7-c3166a57d5a1 ro persistent quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15 Tags: trusty ubuntu Uname: Linux 3.13.0-46-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/22/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.3.0 dmi.board.name: 0R038D dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.3.0:bd06/22/2010:svnDellInc.:pnVostro420Series:pvr:rvnDellInc.:rn0R038D:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Vostro 420 Series dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Mar 12 13:58:37 2015 xserver.configfile: default xserver.errors: Failed to load module nvidia (module does not exist, 0) Failed to load module nvidia (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: nouveau To manage notifications about this bug go to:
[Desktop-packages] [Bug 1316090] xdpyinfo.txt
apport information ** Attachment added: xdpyinfo.txt https://bugs.launchpad.net/bugs/1316090/+attachment/4342806/+files/xdpyinfo.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1316090 Title: Unable to drop/ place files and links on second screen in dual screen set up Status in xorg package in Ubuntu: Incomplete Bug description: After updating from Xubuntu 13.10 (amd64) to Xubuntu 14.04 LTS (amd64) I have encountered a bug with my dual screen set up. Running the XOrg screen driver (xserver-xorg-video-nouveau), it is possible to place/ drag and drop files and links on my left screen desktop. This is also the desktop that contains the system icons (e.g. removable drives, rubbish bin). However, I I try to drag and drop a file or link on the right screen desktop, it will not stick and fly back to its original location on the left screen. Additionally, I noticed that, when dragging the file over the troubled desktop, the placement squares don't show up. They do on the functioning left screen. Although I have a NVIDIA Corporation GK107 [GeForce GTX 650] Geforce I do run the XOrg driver since it gives me the best results with the software I'm using frequently. However, when I tested this during my initial install of Trusty, I noticed that I did not encounter this bug with the proprietary NVidia 304.117 driver (331.38 did not work for me at all). Running the NVidia 304.117 driver, it was possible to drag and drop/ place files and links on both screen desktops. Also the placement squares appeared on both screens when a file was dragged over it. After returning to the XOrg driver, the problem reoccurred, and placement on the right screen was again not possible. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: XFCE DistUpgraded: Fresh install DistroCodename: trusty DistroRelease: Ubuntu 14.04 DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:3553] InstallationDate: Installed on 2014-04-22 (323 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1648): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/at-spi2-core/at-spi-bus-launcher: Success ** (lightdm-gtk-greeter:1648): WARNING **: Failed to run at-spi-bus-launcher: Failed to execute child process /usr/lib/at-spi2-core/at-spi-bus-launcher (No such file or directory) init: indicator-application main process (1682) terminated with status 1 MachineType: Dell Inc. Vostro 420 Series Package: xorg 1:7.7+1ubuntu8.1 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=c073855c-9065-4cc1-95c7-c3166a57d5a1 ro persistent quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15 Tags: trusty ubuntu Uname: Linux 3.13.0-46-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/22/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.3.0 dmi.board.name: 0R038D dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.3.0:bd06/22/2010:svnDellInc.:pnVostro420Series:pvr:rvnDellInc.:rn0R038D:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Vostro 420 Series dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Mar 12 13:58:37 2015 xserver.configfile: default xserver.errors: Failed to load module nvidia (module does not exist, 0) Failed to load module nvidia (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: nouveau To manage notifications about this bug go to:
[Desktop-packages] [Bug 1316090] xserver.outputs.txt
apport information ** Attachment added: xserver.outputs.txt https://bugs.launchpad.net/bugs/1316090/+attachment/4342808/+files/xserver.outputs.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1316090 Title: Unable to drop/ place files and links on second screen in dual screen set up Status in xorg package in Ubuntu: Incomplete Bug description: After updating from Xubuntu 13.10 (amd64) to Xubuntu 14.04 LTS (amd64) I have encountered a bug with my dual screen set up. Running the XOrg screen driver (xserver-xorg-video-nouveau), it is possible to place/ drag and drop files and links on my left screen desktop. This is also the desktop that contains the system icons (e.g. removable drives, rubbish bin). However, I I try to drag and drop a file or link on the right screen desktop, it will not stick and fly back to its original location on the left screen. Additionally, I noticed that, when dragging the file over the troubled desktop, the placement squares don't show up. They do on the functioning left screen. Although I have a NVIDIA Corporation GK107 [GeForce GTX 650] Geforce I do run the XOrg driver since it gives me the best results with the software I'm using frequently. However, when I tested this during my initial install of Trusty, I noticed that I did not encounter this bug with the proprietary NVidia 304.117 driver (331.38 did not work for me at all). Running the NVidia 304.117 driver, it was possible to drag and drop/ place files and links on both screen desktops. Also the placement squares appeared on both screens when a file was dragged over it. After returning to the XOrg driver, the problem reoccurred, and placement on the right screen was again not possible. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: XFCE DistUpgraded: Fresh install DistroCodename: trusty DistroRelease: Ubuntu 14.04 DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:3553] InstallationDate: Installed on 2014-04-22 (323 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1648): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/at-spi2-core/at-spi-bus-launcher: Success ** (lightdm-gtk-greeter:1648): WARNING **: Failed to run at-spi-bus-launcher: Failed to execute child process /usr/lib/at-spi2-core/at-spi-bus-launcher (No such file or directory) init: indicator-application main process (1682) terminated with status 1 MachineType: Dell Inc. Vostro 420 Series Package: xorg 1:7.7+1ubuntu8.1 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=c073855c-9065-4cc1-95c7-c3166a57d5a1 ro persistent quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15 Tags: trusty ubuntu Uname: Linux 3.13.0-46-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/22/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.3.0 dmi.board.name: 0R038D dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.3.0:bd06/22/2010:svnDellInc.:pnVostro420Series:pvr:rvnDellInc.:rn0R038D:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Vostro 420 Series dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Mar 12 13:58:37 2015 xserver.configfile: default xserver.errors: Failed to load module nvidia (module does not exist, 0) Failed to load module nvidia (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: nouveau To manage notifications about
[Desktop-packages] [Bug 1316090] LightdmLog.txt
apport information ** Attachment added: LightdmLog.txt https://bugs.launchpad.net/bugs/1316090/+attachment/4342794/+files/LightdmLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1316090 Title: Unable to drop/ place files and links on second screen in dual screen set up Status in xorg package in Ubuntu: Incomplete Bug description: After updating from Xubuntu 13.10 (amd64) to Xubuntu 14.04 LTS (amd64) I have encountered a bug with my dual screen set up. Running the XOrg screen driver (xserver-xorg-video-nouveau), it is possible to place/ drag and drop files and links on my left screen desktop. This is also the desktop that contains the system icons (e.g. removable drives, rubbish bin). However, I I try to drag and drop a file or link on the right screen desktop, it will not stick and fly back to its original location on the left screen. Additionally, I noticed that, when dragging the file over the troubled desktop, the placement squares don't show up. They do on the functioning left screen. Although I have a NVIDIA Corporation GK107 [GeForce GTX 650] Geforce I do run the XOrg driver since it gives me the best results with the software I'm using frequently. However, when I tested this during my initial install of Trusty, I noticed that I did not encounter this bug with the proprietary NVidia 304.117 driver (331.38 did not work for me at all). Running the NVidia 304.117 driver, it was possible to drag and drop/ place files and links on both screen desktops. Also the placement squares appeared on both screens when a file was dragged over it. After returning to the XOrg driver, the problem reoccurred, and placement on the right screen was again not possible. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: XFCE DistUpgraded: Fresh install DistroCodename: trusty DistroRelease: Ubuntu 14.04 DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:3553] InstallationDate: Installed on 2014-04-22 (323 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1648): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/at-spi2-core/at-spi-bus-launcher: Success ** (lightdm-gtk-greeter:1648): WARNING **: Failed to run at-spi-bus-launcher: Failed to execute child process /usr/lib/at-spi2-core/at-spi-bus-launcher (No such file or directory) init: indicator-application main process (1682) terminated with status 1 MachineType: Dell Inc. Vostro 420 Series Package: xorg 1:7.7+1ubuntu8.1 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=c073855c-9065-4cc1-95c7-c3166a57d5a1 ro persistent quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15 Tags: trusty ubuntu Uname: Linux 3.13.0-46-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/22/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.3.0 dmi.board.name: 0R038D dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.3.0:bd06/22/2010:svnDellInc.:pnVostro420Series:pvr:rvnDellInc.:rn0R038D:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Vostro 420 Series dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Mar 12 13:58:37 2015 xserver.configfile: default xserver.errors: Failed to load module nvidia (module does not exist, 0) Failed to load module nvidia (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: nouveau To manage notifications about this bug go
[Desktop-packages] [Bug 1316090] Re: Unable to drop/ place files and links on second screen in dual screen set up
apport information ** Tags added: apport-collected trusty ubuntu ** Description changed: After updating from Xubuntu 13.10 (amd64) to Xubuntu 14.04 LTS (amd64) I have encountered a bug with my dual screen set up. Running the XOrg screen driver (xserver-xorg-video-nouveau), it is possible to place/ drag and drop files and links on my left screen desktop. This is also the desktop that contains the system icons (e.g. removable drives, rubbish bin). However, I I try to drag and drop a file or link on the right screen desktop, it will not stick and fly back to its original location on the left screen. Additionally, I noticed that, when dragging the file over the troubled desktop, the placement squares don't show up. They do on the functioning left screen. Although I have a NVIDIA Corporation GK107 [GeForce GTX 650] Geforce I do run the XOrg driver since it gives me the best results with the software I'm using frequently. However, when I tested this during my initial install of Trusty, I noticed that I did not encounter this bug with the proprietary NVidia 304.117 driver (331.38 did not work for me at all). Running the NVidia 304.117 driver, it was possible to drag and drop/ place files and links on both screen desktops. Also the placement squares appeared on both screens when a file was dragged over it. - After returning to the XOrg driver, the problem reoccurred, and - placement on the right screen was again not possible. + After returning to the XOrg driver, the problem reoccurred, and placement on the right screen was again not possible. + --- + ApportVersion: 2.14.1-0ubuntu3.7 + Architecture: amd64 + CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' + CompositorRunning: None + CurrentDesktop: XFCE + DistUpgraded: Fresh install + DistroCodename: trusty + DistroRelease: Ubuntu 14.04 + DistroVariant: ubuntu + GraphicsCard: + NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller]) +Subsystem: Gigabyte Technology Co., Ltd Device [1458:3553] + InstallationDate: Installed on 2014-04-22 (323 days ago) + InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) + LightdmGreeterLogOld: + ** (lightdm-gtk-greeter:1648): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/at-spi2-core/at-spi-bus-launcher: Success + + ** (lightdm-gtk-greeter:1648): WARNING **: Failed to run at-spi-bus-launcher: Failed to execute child process /usr/lib/at-spi2-core/at-spi-bus-launcher (No such file or directory) + init: indicator-application main process (1682) terminated with status 1 + MachineType: Dell Inc. Vostro 420 Series + Package: xorg 1:7.7+1ubuntu8.1 + PackageArchitecture: amd64 + ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=c073855c-9065-4cc1-95c7-c3166a57d5a1 ro persistent quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15 + Tags: trusty ubuntu + Uname: Linux 3.13.0-46-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 06/22/2010 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: 1.3.0 + dmi.board.name: 0R038D + dmi.board.vendor: Dell Inc. + dmi.board.version: A00 + dmi.chassis.type: 3 + dmi.chassis.vendor: Dell Inc. + dmi.modalias: dmi:bvnDellInc.:bvr1.3.0:bd06/22/2010:svnDellInc.:pnVostro420Series:pvr:rvnDellInc.:rn0R038D:rvrA00:cvnDellInc.:ct3:cvr: + dmi.product.name: Vostro 420 Series + dmi.sys.vendor: Dell Inc. + version.compiz: compiz N/A + version.ia32-libs: ia32-libs N/A + version.libdrm2: libdrm2 2.4.56-1~ubuntu2 + version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.3 + version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A + version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.3 + version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 + version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 + version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 + version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.4 + version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 + xserver.bootTime: Thu Mar 12 13:58:37 2015 + xserver.configfile: default + xserver.errors: + Failed to load module nvidia (module does not exist, 0) + Failed to load module nvidia (module does not exist, 0) + xserver.logfile: /var/log/Xorg.0.log + xserver.version: 2:1.15.1-0ubuntu2.7 + xserver.video_driver: nouveau ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1316090/+attachment/4342787/+files/BootDmesg.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu.
[Desktop-packages] [Bug 1316090] BootLog.txt
apport information ** Attachment added: BootLog.txt https://bugs.launchpad.net/bugs/1316090/+attachment/4342788/+files/BootLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1316090 Title: Unable to drop/ place files and links on second screen in dual screen set up Status in xorg package in Ubuntu: Incomplete Bug description: After updating from Xubuntu 13.10 (amd64) to Xubuntu 14.04 LTS (amd64) I have encountered a bug with my dual screen set up. Running the XOrg screen driver (xserver-xorg-video-nouveau), it is possible to place/ drag and drop files and links on my left screen desktop. This is also the desktop that contains the system icons (e.g. removable drives, rubbish bin). However, I I try to drag and drop a file or link on the right screen desktop, it will not stick and fly back to its original location on the left screen. Additionally, I noticed that, when dragging the file over the troubled desktop, the placement squares don't show up. They do on the functioning left screen. Although I have a NVIDIA Corporation GK107 [GeForce GTX 650] Geforce I do run the XOrg driver since it gives me the best results with the software I'm using frequently. However, when I tested this during my initial install of Trusty, I noticed that I did not encounter this bug with the proprietary NVidia 304.117 driver (331.38 did not work for me at all). Running the NVidia 304.117 driver, it was possible to drag and drop/ place files and links on both screen desktops. Also the placement squares appeared on both screens when a file was dragged over it. After returning to the XOrg driver, the problem reoccurred, and placement on the right screen was again not possible. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: XFCE DistUpgraded: Fresh install DistroCodename: trusty DistroRelease: Ubuntu 14.04 DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:3553] InstallationDate: Installed on 2014-04-22 (323 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1648): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/at-spi2-core/at-spi-bus-launcher: Success ** (lightdm-gtk-greeter:1648): WARNING **: Failed to run at-spi-bus-launcher: Failed to execute child process /usr/lib/at-spi2-core/at-spi-bus-launcher (No such file or directory) init: indicator-application main process (1682) terminated with status 1 MachineType: Dell Inc. Vostro 420 Series Package: xorg 1:7.7+1ubuntu8.1 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=c073855c-9065-4cc1-95c7-c3166a57d5a1 ro persistent quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15 Tags: trusty ubuntu Uname: Linux 3.13.0-46-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/22/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.3.0 dmi.board.name: 0R038D dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.3.0:bd06/22/2010:svnDellInc.:pnVostro420Series:pvr:rvnDellInc.:rn0R038D:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Vostro 420 Series dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Mar 12 13:58:37 2015 xserver.configfile: default xserver.errors: Failed to load module nvidia (module does not exist, 0) Failed to load module nvidia (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: nouveau To manage notifications about this bug go to:
[Desktop-packages] [Bug 1425987] Re: Cellular data connection stops after a while
** Also affects: canonical-devices-system-image Importance: Undecided Status: New ** Changed in: canonical-devices-system-image Status: New = Incomplete ** Changed in: canonical-devices-system-image Milestone: None = ww13-2015 ** Changed in: canonical-devices-system-image Assignee: (unassigned) = Canonical Phone Foundations (canonical-phonedations-team) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1425987 Title: Cellular data connection stops after a while Status in the base for Ubuntu mobile products: Incomplete Status in network-manager package in Ubuntu: Incomplete Bug description: current build number: 122 device name: krillin channel: ubuntu-touch/devel-proposed alias: ubuntu-touch/vivid-proposed last update: 2015-02-25 15:06:29 version version: 122 version ubuntu: 20150225 version device: 20150210-95b6a9f version custom: 20150225 Test Case: 1. Disable Wifi 2. Verify that a cellular data connection is established 3. Wait... Actual result After a while (several minutes) the cellular data connection stops, eventually it'll come back but not always. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu6 Uname: Linux 3.4.67 armv7l ApportVersion: 2.16.1-0ubuntu2 Architecture: armhf CRDA: Error: [Errno 2] No such file or directory: 'iw' Date: Thu Feb 26 16:14:14 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) # Include files from /etc/network/interfaces.d: source-directory /etc/network/interfaces.d InstallationDate: Installed on 2015-02-25 (1 days ago) InstallationMedia: Ubuntu Vivid Vervet (development branch) - armhf (20150225-020204) IpRoute: NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=false WWANEnabled=true WimaxEnabled=true PciNetwork: RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: mtime.conffile..etc.dbus.1.system.d.org.freedesktop.NetworkManager.conf: 2015-02-25T03:31:54 nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1425987/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1300557] Re: Screen resolution no longer works
According to the dpkg.log for that date, quite a lot: libc-bin for amd64. Also gcc-4.8, gcc-4.9, along with g++, cpp, libgcc1, libstdc++6 etc, for amd64 and i386; and libitm1, libgomp1, libgfortran3, libasan0, libatomic1, libtsan0, libquadmath0, libthumbnailer0, apport, apport-gtk, python3-problem-report, python3-apport, binfmt-support, dh-apport, libgtk2-perl, python-boto, python-lxml, python3-lxml, unity-webapps-qml, mobile-broadband-provider-info, python-keystoneclient, The day before I upgraded among other things libffi6 (for i386 and amd64) and libffi-dev, dconf-gsettings-backend, dconf-service, libdconf1, various dconf tools and frontends, libglib2.0-*, libunity- control-center1 and unity-control-center, libido3-0.1-0, lxc and related packages, libapparmor1 and apparmor, libqt5positioning5, libunity-gtk3-parser0, openjdk-7 and icedtea-7, ubuntu-release-upgrader and update-manager, libcompizconfig0, compiz-gnome, compiz-plugins- default, libdecoration0, compiz-core, compiz, im-config, kerneloops- daemon, indicator-*, unity-scope-*, libreoffice, unity, libunity- core-6.0.9, unity-services, ubuntu-mono, libvirt, the kernel, and dh- apparmor. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1300557 Title: Screen resolution no longer works Status in xorg package in Ubuntu: Incomplete Bug description: My display's native resolution is 2560×1440 pixels. Prior to, I think, Saucy I could only reach this resolution by adding it using xrandr, and then calling xrandr on boot/login to select that resolution. The Display preferences did not show any higher options than 1920×1200. In Saucy, the native resolution just worked, and I could stop using xrandr. It also worked in Trusty in the alpha releases, up to (and I think including) beta-1. But today (this is not an April's fool, is it?) I rebooted after an upgrade, and found myself back in 1920×1200. Again, the Display preferences list that resolution as the highest possible. But this time, attempts to ‘xrandr --addmode’ my native resolution failed. The error message wasn't very helpful; I'll try to reproduce it later but it throws my display into yet a lower resolution that's hard to work with. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-20.42-generic 3.13.7 Uname: Linux 3.13.0-20-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Apr 1 09:59:00 2014 DistUpgraded: 2014-01-22 17:01:10,909 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:d000] InstallationDate: Installed on 2013-08-03 (240 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: Gigabyte Technology Co., Ltd. Z87-D3HP ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-20-generic root=UUID=12085c8d-328f-4c75-a04c-184c592f61ee ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to trusty on 2014-01-22 (68 days ago) dmi.bios.date: 05/16/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F4 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z87-D3HP-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF4:bd05/16/2013:svnGigabyteTechnologyCo.,Ltd.:pnZ87-D3HP:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnZ87-D3HP-CF:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: Z87-D3HP dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz 1:0.9.11+14.04.20140328-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-1ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.15.0-1ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3
[Desktop-packages] [Bug 1431257] Re: fcitx indicator shown when fcitx isn't in use
** Changed in: im-config (Ubuntu) Assignee: William Hua (attente) = Aron Xu (happyaron) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to im-config in Ubuntu. https://bugs.launchpad.net/bugs/1431257 Title: fcitx indicator shown when fcitx isn't in use Status in im-config package in Ubuntu: Confirmed Bug description: I don't have any other input source than English (UK) added in Text Entry in the control centre. In language-selector ibus is selected as the IME in use. I just logged in and I'm seeing a fcitx indicator. I *do* have fcitx installed, but just having it installed shouldn't cause it to be used unless my configuration demands it, because it doesn't perform any useful function and takes up space. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/im-config/+bug/1431257/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1425493] Re: release 2.4 of network-manager-gnome causes greyed out Edit Connections... in nm-applet
*** This bug is a duplicate of bug 1424119 *** https://bugs.launchpad.net/bugs/1424119 ** This bug has been marked a duplicate of bug 1424119 Edit Connections...now insensitive by default in network manager's menu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager-applet in Ubuntu. https://bugs.launchpad.net/bugs/1425493 Title: release 2.4 of network-manager-gnome causes greyed out Edit Connections... in nm-applet Status in network-manager-applet package in Ubuntu: New Bug description: Linux Mint 13 (Maya), MATE 64 bit edition. -r--r--r-- 1 root root 403974 Sep 21 20:30 network-manager-gnome_0.9.4.1-0ubuntu2.3_amd64.deb -r--r--r-- 1 root root 404006 Feb 5 15:18 network-manager-gnome_0.9.4.1-0ubuntu2.4_amd64.deb -r--r--r-- 1 root root 402358 Apr 3 2012 network-manager-gnome_0.9.4.1-0ubuntu2_amd64.deb On Feb 5, 2015, I ran update manager and it installed network- manager-gnome_0.9.4.1-0ubuntu2.4_amd64.deb. Afterwards, when I went to edit my network connections using the panel application launcher nm-applet, the Edit Connetions... text was greyed out. I was expecting it to be black and selectable. After some investigation, I downgraded network-manager-gnome to network-manager-gnome_0.9.4.1-0ubuntu2_amd64.deb and the nm-applet was corrected and back to normal. Again, I was able to consistently upgraded to 2.4 to replicate the problem and downgrade to 2 to correct it. This can possibly qualify as a desktop related issue, so I will open a bug in gethub.com also. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager-applet/+bug/1425493/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430893] Re: [FFe] Install Fcitx for Chinese users
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ubuntu-meta (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1430893 Title: [FFe] Install Fcitx for Chinese users Status in im-config package in Ubuntu: Confirmed Status in language-selector package in Ubuntu: Confirmed Status in ubuntu-meta package in Ubuntu: Confirmed Bug description: There are currently two main supported input method frameworks available for CJK users: IBus (current default) and Fcitx. Both are mature projects, but Fcitx is better suited to Chinese users than IBus is, and is already the default in Ubuntu Kylin. IBus is increasingly moving in the direction of removing features upstream like tracking input state on a per-context basis. Also, the leading input method provider in China with more than 300 million users, Sogou, only supports Fcitx under Linux. Skinning support is non-existent in IBus. We've added support for Fcitx on the same level as IBus in Unity, so this FFe is a proposal to make Fcitx the default for Chinese locales this cycle, as a transition towards making Fcitx the default for all users next cycle. The changes should simply be seeding Fcitx and its related packages on the CD image, as well as possible changes to im- config. Those who have explicitly selected IBus as their chosen input method should be unaffected; these changes will only affect new users, and users who have never explicitly chosen an input method framework in their language settings. Also, this FFe propose to make language-selector to install more input method packages for Chinese users to their Fcitx equivalents (currently IBus) when adding/completing Chinese language support. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/im-config/+bug/1430893/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1418077] Re: After radio technology is changed, mobile-data takes ~5m to re-connect
** Tags added: lt-category-visible -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1418077 Title: After radio technology is changed, mobile-data takes ~5m to re-connect Status in the base for Ubuntu mobile products: In Progress Status in network-manager package in Ubuntu: In Progress Bug description: Steps to reproduce: 1. Confirm cellular data (disable wifi) 2. Change TechnologyPreference on online SIM 3. Confirm no cellular data 4. Wait ~10 minutes 5. Confirm cellular data What happens: Changing something on the modem causes cellular data to disappear for 10 minutes What should happen: It should behave as before, i.e. cellular data should come back immediately current build number: 97 device name: krillin channel: ubuntu-touch/devel-proposed alias: ubuntu-touch/vivid-proposed last update: 2015-02-02 12:48:25 version version: 97 version ubuntu: 20150202 version device: 20150128-5379bdb version custom: 20150202 To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1418077/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430893] Re: [FFe] Install Fcitx for Chinese users
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: im-config (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1430893 Title: [FFe] Install Fcitx for Chinese users Status in im-config package in Ubuntu: Confirmed Status in language-selector package in Ubuntu: Confirmed Status in ubuntu-meta package in Ubuntu: Confirmed Bug description: There are currently two main supported input method frameworks available for CJK users: IBus (current default) and Fcitx. Both are mature projects, but Fcitx is better suited to Chinese users than IBus is, and is already the default in Ubuntu Kylin. IBus is increasingly moving in the direction of removing features upstream like tracking input state on a per-context basis. Also, the leading input method provider in China with more than 300 million users, Sogou, only supports Fcitx under Linux. Skinning support is non-existent in IBus. We've added support for Fcitx on the same level as IBus in Unity, so this FFe is a proposal to make Fcitx the default for Chinese locales this cycle, as a transition towards making Fcitx the default for all users next cycle. The changes should simply be seeding Fcitx and its related packages on the CD image, as well as possible changes to im- config. Those who have explicitly selected IBus as their chosen input method should be unaffected; these changes will only affect new users, and users who have never explicitly chosen an input method framework in their language settings. Also, this FFe propose to make language-selector to install more input method packages for Chinese users to their Fcitx equivalents (currently IBus) when adding/completing Chinese language support. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/im-config/+bug/1430893/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316090] LightdmDisplayLog.txt
apport information ** Attachment added: LightdmDisplayLog.txt https://bugs.launchpad.net/bugs/1316090/+attachment/4342792/+files/LightdmDisplayLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1316090 Title: Unable to drop/ place files and links on second screen in dual screen set up Status in xorg package in Ubuntu: Incomplete Bug description: After updating from Xubuntu 13.10 (amd64) to Xubuntu 14.04 LTS (amd64) I have encountered a bug with my dual screen set up. Running the XOrg screen driver (xserver-xorg-video-nouveau), it is possible to place/ drag and drop files and links on my left screen desktop. This is also the desktop that contains the system icons (e.g. removable drives, rubbish bin). However, I I try to drag and drop a file or link on the right screen desktop, it will not stick and fly back to its original location on the left screen. Additionally, I noticed that, when dragging the file over the troubled desktop, the placement squares don't show up. They do on the functioning left screen. Although I have a NVIDIA Corporation GK107 [GeForce GTX 650] Geforce I do run the XOrg driver since it gives me the best results with the software I'm using frequently. However, when I tested this during my initial install of Trusty, I noticed that I did not encounter this bug with the proprietary NVidia 304.117 driver (331.38 did not work for me at all). Running the NVidia 304.117 driver, it was possible to drag and drop/ place files and links on both screen desktops. Also the placement squares appeared on both screens when a file was dragged over it. After returning to the XOrg driver, the problem reoccurred, and placement on the right screen was again not possible. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: XFCE DistUpgraded: Fresh install DistroCodename: trusty DistroRelease: Ubuntu 14.04 DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:3553] InstallationDate: Installed on 2014-04-22 (323 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1648): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/at-spi2-core/at-spi-bus-launcher: Success ** (lightdm-gtk-greeter:1648): WARNING **: Failed to run at-spi-bus-launcher: Failed to execute child process /usr/lib/at-spi2-core/at-spi-bus-launcher (No such file or directory) init: indicator-application main process (1682) terminated with status 1 MachineType: Dell Inc. Vostro 420 Series Package: xorg 1:7.7+1ubuntu8.1 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=c073855c-9065-4cc1-95c7-c3166a57d5a1 ro persistent quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15 Tags: trusty ubuntu Uname: Linux 3.13.0-46-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/22/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.3.0 dmi.board.name: 0R038D dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.3.0:bd06/22/2010:svnDellInc.:pnVostro420Series:pvr:rvnDellInc.:rn0R038D:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Vostro 420 Series dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Mar 12 13:58:37 2015 xserver.configfile: default xserver.errors: Failed to load module nvidia (module does not exist, 0) Failed to load module nvidia (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: nouveau To manage notifications
[Desktop-packages] [Bug 833727] Re: Panel opacity setting is ignored (always opaque) on startup
Verified that Panel transparency is 100% controllable on the Adwaita, Ambience, Radiance, and High Contrast themes in Unity 7 or later. Marking as fixed for those series. ** Changed in: unity Status: Incomplete = Fix Released ** Changed in: unity Milestone: 7.3.2 = None -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/833727 Title: Panel opacity setting is ignored (always opaque) on startup Status in Unity: Fix Released Status in unity package in Ubuntu: Expired Bug description: Tried to set panel transparency with unity plugin in CCSM and I can't obtain tranparency for the panel while using Radiance Theme. That's OK with Ambiance Theme . Last Update/upgrade done at 13.00 pm ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: unity 4.8.2-0ubuntu4 ProcVersionSignature: Ubuntu 3.0.0-9.14-generic 3.0.3 Uname: Linux 3.0.0-9-generic x86_64 Architecture: amd64 CompizPlugins: [core,bailer,detection,composite,opengl,compiztoolbox,decor,vpswitch,gnomecompat,mousepoll,regex,imgpng,animation,grid,wall,workarounds,place,resize,move,snap,session,expo,fade,ezoom,scale,unityshell] CompositorRunning: compiz Date: Thu Aug 25 14:12:54 2011 DistUpgraded: Fresh install DistroCodename: oneiric DistroVariant: ubuntu GraphicsCard: ATI Technologies Inc RV730XT [Radeon HD 4670] [1002:9490] (prog-if 00 [VGA controller]) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Alpha amd64 (20110808) MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-9-generic root=UUID=b2f3b035-88c2-450b-919e-0b65be858730 ro quiet splash vt.handoff=7 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: dmi.bios.date: 04/10/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0220 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P5QPL-VM EPU dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0220:bd04/10/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5QPL-VMEPU:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.5.92+bzr2791-0ubuntu1 version.ia32-libs: ia32-libs 20090808ubuntu16 version.libdrm2: libdrm2 2.4.26-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 7.11-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 7.11-0ubuntu3 version.xserver-xorg: xserver-xorg 1:7.6+7ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.6.0-1ubuntu13 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20110811.g93fc084-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.15.901-1ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20110411+8378443-1 To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/833727/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431369] Re: Pidgin crash on start
*** This bug is a duplicate of bug 1429796 *** https://bugs.launchpad.net/bugs/1429796 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #1429796, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Attachment removed: CoreDump.gz https://bugs.launchpad.net/bugs/1431369/+attachment/4342839/+files/CoreDump.gz ** Attachment removed: ProcMaps.txt https://bugs.launchpad.net/bugs/1431369/+attachment/4342842/+files/ProcMaps.txt ** Attachment removed: ProcStatus.txt https://bugs.launchpad.net/bugs/1431369/+attachment/4342843/+files/ProcStatus.txt ** This bug has been marked a duplicate of private bug 1429796 ** Information type changed from Private to Public ** Tags removed: need-i386-retrace -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pidgin in Ubuntu. https://bugs.launchpad.net/bugs/1431369 Title: Pidgin crash on start Status in pidgin package in Ubuntu: New Bug description: Pidgin crash on start when launched by shortcut in menu. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: pidgin 1:2.10.9-0ubuntu8 ProcVersionSignature: Ubuntu 3.19.0-8.8-generic 3.19.1 Uname: Linux 3.19.0-8-generic i686 ApportVersion: 2.16.2-0ubuntu2 Architecture: i386 CrashCounter: 1 CurrentDesktop: LXDE Date: Thu Mar 12 14:57:23 2015 ExecutablePath: /usr/bin/pidgin InstallationDate: Installed on 2013-03-16 (726 days ago) InstallationMedia: Lubuntu 12.10 Quantal Quetzal - Release i386 (20121017.1) ProcCmdline: pidgin SegvAnalysis: Skipped: missing required field Disassembly Signal: 11 SourcePackage: pidgin UpgradeStatus: Upgraded to vivid on 2015-02-27 (12 days ago) UserGroups: adm audio cdrom dialout dip disk fax floppy fuse lpadmin netdev plugdev sambashare scanner sudo tape video To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pidgin/+bug/1431369/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1425172] Re: Network indicator lists the non-exist AP
This will be a blocker, still seeing in build 127 The list is never pruned. A reboot resets the list of APs. This is definitely Vivid only behavior. The size of the AP list also makes me wonder if we are actually suspending the phone. ** Changed in: canonical-devices-system-image Milestone: ww11-2015 = ww13-2015 ** Changed in: canonical-devices-system-image Importance: High = Critical -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1425172 Title: Network indicator lists the non-exist AP Status in the base for Ubuntu mobile products: Confirmed Status in network-manager package in Ubuntu: Confirmed Status in network-manager package in Ubuntu RTM: Confirmed Bug description: Summary: Network indicator lists the non-exist AP Steps to reproduce: 1. Boot to system 2. Scroll down the Network indicator 3. It lists about 10 AP (In Taipei office) 4. Go to another place and check network indicator again Expected Result: It should not list non-exist AP and only show available AP Actual Result: It shows about 12 AP on the screen but only two are real AP for connecting, and others 10 are from last list. This is reproducible on mako/krillin on both RTM and vivid. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1425172/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430561] Re: hp-plugin crashes with error: Python gobject/dbus may be not installed
Those steps worked successfully. I was able to print! Thanks goutam!!! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1430561 Title: hp-plugin crashes with error: Python gobject/dbus may be not installed Status in HP Linux Imaging and Printing: Confirmed Status in One Hundred Papercuts: Confirmed Status in hplip package in Ubuntu: Confirmed Bug description: When trying to configure an HP LaserJet P1102w, when running hp-plugin I get errors and can not proceed: nessita@miro:~$ hp-plugin error: Unable to locate models.dat file HP Linux Imaging and Printing System (ver. 3.15.2) Plugin Download and Install Utility ver. 2.1 Copyright (c) 2001-15 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Checking for network connection... Downloading plug-in from: Receiving digital keys: /usr/bin/gpg --homedir /home/nessita/.hplip/.gnupg --no-permission-warning --keyserver pgp.mit.edu --recv-keys 0xA59047B9 Creating directory plugin_tmp Verifying archive integrity... All good. Uncompressing HPLIP 3.15.2 Plugin Self Extracting Archive... Error importing HPLIP modules. Is HPLIP installed? error: Python gobject/dbus may be not installed error: Plug-in install failed. Done. nessita@miro:~$ ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: hplip 3.15.2-0ubuntu3 ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0 Uname: Linux 3.19.0-7-generic x86_64 ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Tue Mar 10 19:23:41 2015 InstallationDate: Installed on 2014-11-30 (100 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) Lpstat: device for Laserjet: ipp://NPI2E6620.local:631/printers/Laserjet MachineType: LENOVO 3249CTO Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-7-generic root=UUID=30425f63-143e-4183-aa37-394415c60a42 ro quiet splash vt.handoff=7 SourcePackage: hplip UpgradeStatus: Upgraded to vivid on 2015-02-09 (29 days ago) dmi.bios.date: 10/26/2010 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET61WW (1.31 ) dmi.board.name: 3249CTO dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET61WW(1.31):bd10/26/2010:svnLENOVO:pn3249CTO:pvrThinkPadX201:rvnLENOVO:rn3249CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3249CTO dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/1430561/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1362640] Re: Remove qtwebkit from touch image
What is left before this can be removed? ** Changed in: canonical-devices-system-image Milestone: ww11-2015 = ww13-2015 ** Changed in: canonical-devices-system-image Assignee: Canonical Devices Products (canonical-devices-products-team) = David Barth (dbarth) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to signon-ui in Ubuntu. https://bugs.launchpad.net/bugs/1362640 Title: Remove qtwebkit from touch image Status in the base for Ubuntu mobile products: Confirmed Status in Cordova Ubuntu: Fix Released Status in Web Browser App: Triaged Status in signon-ui package in Ubuntu: Triaged Status in ubuntu-html5-theme package in Ubuntu: Triaged Status in ubuntu-touch-meta package in Ubuntu: In Progress Status in webbrowser-app package in Ubuntu: Triaged Bug description: The argument to remove this is based on the following: The qtwebkit webview is deprecated for our sdk and we will not be supporting it long term We are supporting an Oxide/Chromium solution for the Ubuntu.Webview This was done largely for security reasons The qtwebkit package is large and we would like to reduce image and install size We want to discourage app devs from using this api any longer, the review tools have indicated this for several months To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1362640/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430620] Re: gnome-terminal writes excessively to /tmp (affecting SSD drives)
With the max speed of vte measured on my computer (as I mentioned above), producing 75 TB of scrollback data takes about half a year. (With the compression, it'll be 1.5-2 years or so). Combine that with the typical load average of your terminals in the long run (including those times when the app isn't even running) hopefully being way below 1%, I still don't think SSD lifetime is a valid real-life issue. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to vte in Ubuntu. https://bugs.launchpad.net/bugs/1430620 Title: gnome-terminal writes excessively to /tmp (affecting SSD drives) Status in vte package in Ubuntu: New Bug description: 1) In a gnome-terminal run sudo fatrace -f W -t (filter for writes plus timestamps). 2) In another window cat a file to the screen. 3) Observe the activity. I see large churn on the /tmp partitition: 20:41:24.158837 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.158837 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.159268 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.159268 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.159674 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.159674 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.160171 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.160171 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.160603 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.160603 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.160919 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.160919 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.161093 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.161093 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.161545 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.161545 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.161999 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.161999 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.162447 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.162447 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.162825 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.162825 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.162899 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.162899 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.163366 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.163366 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.163817 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.163817 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.164331 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.164331 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.164729 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.164729 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.164729 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.164729 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.165219 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.165219 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.165674 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.165674 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.166128 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.166128 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.166587 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.166587 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.10 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.10 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.167056 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.167056 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.167529 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.167529 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.167949 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.167949 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.168451 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.168451 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.168524 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.168524 gnome-terminal(23352): W /tmp/#132835 (deleted) 20:41:24.168889 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.168889 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.169364 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.169364 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.169808 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.169808 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.170281 gnome-terminal(23352): W /tmp/#132828 (deleted) 20:41:24.170281 gnome-terminal(23352): W
[Desktop-packages] [Bug 1425172] Re: Network indicator lists the non-exist AP
** Changed in: canonical-devices-system-image Assignee: (unassigned) = Michael Frey (mfrey) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1425172 Title: Network indicator lists the non-exist AP Status in the base for Ubuntu mobile products: Confirmed Status in network-manager package in Ubuntu: Confirmed Status in network-manager package in Ubuntu RTM: Confirmed Bug description: Summary: Network indicator lists the non-exist AP Steps to reproduce: 1. Boot to system 2. Scroll down the Network indicator 3. It lists about 10 AP (In Taipei office) 4. Go to another place and check network indicator again Expected Result: It should not list non-exist AP and only show available AP Actual Result: It shows about 12 AP on the screen but only two are real AP for connecting, and others 10 are from last list. This is reproducible on mako/krillin on both RTM and vivid. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1425172/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431257] Re: fcitx indicator shown when fcitx isn't in use
Let me see if this is the autostart stuff in fcitx-ui-qimpanel causes the trouble. ** Package changed: fcitx (Ubuntu) = im-config (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to im-config in Ubuntu. https://bugs.launchpad.net/bugs/1431257 Title: fcitx indicator shown when fcitx isn't in use Status in im-config package in Ubuntu: Confirmed Bug description: I don't have any other input source than English (UK) added in Text Entry in the control centre. In language-selector ibus is selected as the IME in use. I just logged in and I'm seeing a fcitx indicator. I *do* have fcitx installed, but just having it installed shouldn't cause it to be used unless my configuration demands it, because it doesn't perform any useful function and takes up space. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/im-config/+bug/1431257/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431343] Re: nm-applet crashed with SIGSEGV in g_main_context_dispatch()
*** This bug is a duplicate of bug 1418260 *** https://bugs.launchpad.net/bugs/1418260 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #1418260, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Attachment removed: CoreDump.gz https://bugs.launchpad.net/bugs/1431343/+attachment/4342753/+files/CoreDump.gz ** Attachment removed: Disassembly.txt https://bugs.launchpad.net/bugs/1431343/+attachment/4342755/+files/Disassembly.txt ** Attachment removed: ProcMaps.txt https://bugs.launchpad.net/bugs/1431343/+attachment/4342763/+files/ProcMaps.txt ** Attachment removed: ProcStatus.txt https://bugs.launchpad.net/bugs/1431343/+attachment/4342764/+files/ProcStatus.txt ** Attachment removed: Registers.txt https://bugs.launchpad.net/bugs/1431343/+attachment/4342765/+files/Registers.txt ** Attachment removed: Stacktrace.txt https://bugs.launchpad.net/bugs/1431343/+attachment/4342767/+files/Stacktrace.txt ** Attachment removed: ThreadStacktrace.txt https://bugs.launchpad.net/bugs/1431343/+attachment/4342768/+files/ThreadStacktrace.txt ** This bug has been marked a duplicate of private bug 1418260 ** Information type changed from Private to Public ** Tags removed: need-amd64-retrace -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager-applet in Ubuntu. https://bugs.launchpad.net/bugs/1431343 Title: nm-applet crashed with SIGSEGV in g_main_context_dispatch() Status in network-manager-applet package in Ubuntu: New Bug description: Session init ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: network-manager-gnome 0.9.10.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1 Uname: Linux 3.19.0-9-generic x86_64 ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Thu Mar 12 08:49:28 2015 ExecutablePath: /usr/bin/nm-applet IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-01-31 (39 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150130) IpRoute: default via 192.168.43.1 dev wlan0 proto static metric 1024 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.174 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ProcCmdline: nm-applet ProcEnviron: LANGUAGE=es_BO:es PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=es_BO.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x4327a0: mov0x18(%r14),%rdi PC (0x004327a0) ok source 0x18(%r14) (0x0018) not located in a known VMA region (needed readable region)! destination %rdi ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: network-manager-applet StacktraceTop: ?? () ?? () ?? () ?? () g_main_context_dispatch () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 Title: nm-applet crashed with SIGSEGV in g_main_context_dispatch() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlan0 wifi connected/org/freedesktop/NetworkManager/Devices/2 AndroidAP ec4d6f23-2b8b-40be-810c-52ead13aae9f /org/freedesktop/NetworkManager/ActiveConnection/0 eth0ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager-applet/+bug/1431343/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
