[Desktop-packages] [Bug 510625] Re: Bad parsing of GnuPG output, expecting english output, which doesn't work if locales different than english.
** Changed in: duplicity (Debian) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to duplicity in Ubuntu. https://bugs.launchpad.net/bugs/510625 Title: Bad parsing of GnuPG output, expecting english output, which doesn't work if locales different than english. Status in Duplicity: Fix Released Status in duplicity package in Ubuntu: Confirmed Status in duplicity package in Debian: Fix Released Bug description: this is a forward/extract of debian bug #565398, which lives over there: http://bugs.debian.org/565398 summary: when using gpg and --encrypt-key, and only if LANG is set to de_AT and LC_CTYPE is set to de_AT (or POSIX or C, but not iso-8859-1 or utf-8), then incremental backups fail completely. somehow or other duplicity mis-interprets gnupg output and errors out: i assume it would be the 8-bit nature of certain phrases like "Schlüssel" (german for "key") which causes the mess, but i can't identify the code in question. reproducible: always. needs only an empty backup dir (source), an empty target dir (target), a gpg key and locale de_AT available. duplicity --encrypt-key KEYID source file://target works fine, creates a (minuscule) full backup running it again, with LANG unset (or to something purely 7bit like en_US) works perfect again, no problems. but running it with LANG=de_AT and LC_CTYPE=de_AT causes duplicity to attempt some gnupg decryption (of what? the cache and archive are in sync), and it dies with a gpg failure (with the gpg message being the german equivalent of "encryption failed: bad passphrase", not surprising as no passphrase was given, nor should one be necessary). i'm attaching the relevant -v9 logs, first of the successful full run, then of a failed inc run (LANG and LC_CTYPE=de_AT) and then of the successful inc run (LANG="", LC_CTYPE=de_AT). no changes were made to the source dir between runs. regards, az To manage notifications about this bug go to: https://bugs.launchpad.net/duplicity/+bug/510625/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2015706] Re: Automatic time-zone detection does not work
** Changed in: geocode-glib (Debian) Status: Unknown => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to geocode-glib in Ubuntu. https://bugs.launchpad.net/bugs/2015706 Title: Automatic time-zone detection does not work Status in geocode-glib package in Ubuntu: Fix Released Status in geocode-glib package in Debian: Fix Released Bug description: Whenever gsd-datetime attempts to query the location, the following lines appear in journalctl: Apr 09 17:38:11 prescott gsd-datetime[13578]: g_bytes_unref_to_data: assertion 'size != NULL' failed Apr 09 17:38:11 prescott gsd-datetime[13578]: g_file_set_contents_full: assertion 'contents != NULL || length == 0' failed Apr 09 17:38:11 prescott gsd-datetime[13578]: g_task_return_error: assertion 'error != NULL' failed Apr 09 17:38:11 prescott gsd-datetime[13578]: GTask 0x562ac7384890 (source object: 0x562ac6d73480, source tag: (nil)) finalized without ever returning (using g_task_return_*()). This potentially indicates a bug in the program. After doing some debugging, I have found that the issue is fixed by applying this commit from upstream: https://gitlab.gnome.org/GNOME/geocode- glib/-/commit/72285d203963c118a05f810016b584210663ae80 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/geocode-glib/+bug/2015706/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016990] Re: [Lunar] Irregular FPS with Path of Exile
If all of those fail to improve the situation then having "vsync on" in the game might be triggering https://gitlab.gnome.org/GNOME/mutter/-/issues/2646 which is fixed in Mesa 23.0.2. Though you should have that fixed version already, unless you're using a proprietary AMD driver? ** Bug watch added: gitlab.gnome.org/GNOME/mutter/-/issues #2646 https://gitlab.gnome.org/GNOME/mutter/-/issues/2646 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/2016990 Title: [Lunar] Irregular FPS with Path of Exile Status in mutter package in Ubuntu: Incomplete Bug description: I'm having a strange issue with the game Path of Exile (free). With Ubuntu Wayland session, vsync on, I get very irregular frame rates, it jumps around 40 fps. If I switch to Plasma Wayland the game is very smooth 60 fps. I'm running the game from Steam with Proton. I've tried Proton Experimental and Proton 8.0 so far, no difference. The game uses Vulkan so I guess it's being allowed to set up all the swap and presentation stuff pretty much itself... ? MUTTER_DEBUG_DISABLE_TRIPLE_BUFFERING=1 doesn't help Mutter so it's not strictly related to triple buffering, which makes sense since it's a full screen game anyway. Kernel: 6.2.0-1003-lowlatency GPU: Radeon 6800 XT CPU: Ryzen 9 5900X To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/2016990/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2017027] Re: Sound device missing (monitor)
** Package changed: gnome-session (Ubuntu) => pipewire (Ubuntu) ** Also affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-session in Ubuntu. https://bugs.launchpad.net/bugs/2017027 Title: Sound device missing (monitor) Status in gnome-control-center package in Ubuntu: New Status in pipewire package in Ubuntu: New Bug description: GNOME isn't exposing the monitor audio device. It doesn't show up as an option to switch to in the Sound settings. This is the device, from 'lspci': > 03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller It's an LG ultrawide monitor connected via HDMI to an AMD Radeon RX 6600 graphics card. I'm reporting it against the Ubuntu session because I cannot reproduce this on a different desktop or distribution. I've recently tried Kubuntu 22.10 and Fedora 37, and both worked as expected. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: ubuntu-session 43.0-1ubuntu2 ProcVersionSignature: Ubuntu 5.19.0-40.41-generic 5.19.17 Uname: Linux 5.19.0-40-generic x86_64 ApportVersion: 2.23.1-0ubuntu3.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 15:24:31 2023 InstallationDate: Installed on 2023-04-17 (2 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) PackageArchitecture: all SourcePackage: gnome-session UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/2017027/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016990] Re: [Lunar] Irregular FPS with Path of Exile
For lunar, please try MUTTER_DEBUG_TRIPLE_BUFFERING=never although I don't expect that's the issue. Assuming that's not the issue, please also try MUTTER_DEBUG=kms and then monitor the posting method with: journalctl -f /usr/bin/gnome-shell | grep Posting or collect it afterwards: journalctl -b0 /usr/bin/gnome-shell | grep Posting > journal.txt and attach the results here. Separately, another setting to try is: CLUTTER_PAINT=disable-dynamic- max-render-time ** Changed in: mutter (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/2016990 Title: [Lunar] Irregular FPS with Path of Exile Status in mutter package in Ubuntu: Incomplete Bug description: I'm having a strange issue with the game Path of Exile (free). With Ubuntu Wayland session, vsync on, I get very irregular frame rates, it jumps around 40 fps. If I switch to Plasma Wayland the game is very smooth 60 fps. I'm running the game from Steam with Proton. I've tried Proton Experimental and Proton 8.0 so far, no difference. The game uses Vulkan so I guess it's being allowed to set up all the swap and presentation stuff pretty much itself... ? MUTTER_DEBUG_DISABLE_TRIPLE_BUFFERING=1 doesn't help Mutter so it's not strictly related to triple buffering, which makes sense since it's a full screen game anyway. Kernel: 6.2.0-1003-lowlatency GPU: Radeon 6800 XT CPU: Ryzen 9 5900X To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/2016990/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016435] xdpyinfo.txt
apport information ** Attachment added: "xdpyinfo.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665368/+files/xdpyinfo.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016990] Re: [Lunar] Irregular FPS with Path of Exile
** Tags added: amdgpu lunar performance -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/2016990 Title: [Lunar] Irregular FPS with Path of Exile Status in mutter package in Ubuntu: Incomplete Bug description: I'm having a strange issue with the game Path of Exile (free). With Ubuntu Wayland session, vsync on, I get very irregular frame rates, it jumps around 40 fps. If I switch to Plasma Wayland the game is very smooth 60 fps. I'm running the game from Steam with Proton. I've tried Proton Experimental and Proton 8.0 so far, no difference. The game uses Vulkan so I guess it's being allowed to set up all the swap and presentation stuff pretty much itself... ? MUTTER_DEBUG_DISABLE_TRIPLE_BUFFERING=1 doesn't help Mutter so it's not strictly related to triple buffering, which makes sense since it's a full screen game anyway. Kernel: 6.2.0-1003-lowlatency GPU: Radeon 6800 XT CPU: Ryzen 9 5900X To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/2016990/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016435] acpidump.txt
apport information ** Attachment added: "acpidump.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665367/+files/acpidump.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] Xrandr.txt
apport information ** Attachment added: "Xrandr.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665366/+files/Xrandr.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665361/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock
[Desktop-packages] [Bug 2016435] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665362/+files/ProcModules.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation
[Desktop-packages] [Bug 2016435] XorgLogOld.txt
apport information ** Attachment added: "XorgLogOld.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665365/+files/XorgLogOld.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation
[Desktop-packages] [Bug 2016435] XorgLog.txt
apport information ** Attachment added: "XorgLog.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665364/+files/XorgLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665363/+files/UdevDb.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665359/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock
[Desktop-packages] [Bug 2016435] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665360/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation
[Desktop-packages] [Bug 2016435] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665358/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation
[Desktop-packages] [Bug 2016435] Lsusb-v.txt
apport information ** Attachment added: "Lsusb-v.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665357/+files/Lsusb-v.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] Lsusb-t.txt
apport information ** Attachment added: "Lsusb-t.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665356/+files/Lsusb-t.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] Lspci-vt.txt
apport information ** Attachment added: "Lspci-vt.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665354/+files/Lspci-vt.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665355/+files/Lsusb.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665353/+files/Lspci.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] DpkgLog.txt
apport information ** Attachment added: "DpkgLog.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665352/+files/DpkgLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21
[Desktop-packages] [Bug 2016435] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/2016435/+attachment/5665351/+files/Dependencies.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-amdgpu in Ubuntu. https://bugs.launchpad.net/bugs/2016435 Title: amdgpu driver randomly resets Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation
[Desktop-packages] [Bug 2016435] Re: amdgpu driver randomly resets
apport information ** Description changed: amdgpu tends to randomly reset. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xserver-xorg-video-amdgpu 23.0.0-1 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE Date: Sun Apr 16 18:04:34 2023 DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER ProcKernelCmdLine: root=UUID=1f611ee1-b4c4-4178-8681-c1e1fe158f52 ro rootflags=subvol=@ amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 vfio-pci.ids=10de:2486,10de:228b,1b21:2142 amdgpu.ppfeaturemask=0x quiet splash vt.handoff=7 initrd=@\boot\initrd.img-6.2.0-20-generic SourcePackage: xserver-xorg-video-amdgpu UpgradeStatus: Upgraded to lunar on 2023-04-01 (14 days ago) dmi.bios.date: 10/01/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: F3c dmi.board.asset.tag: Default string dmi.board.name: X570S AORUS MASTER dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrF3c:bd10/01/2021:br5.17:svnGigabyteTechnologyCo.,Ltd.:pnX570SAORUSMASTER:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570SAORUSMASTER:rvrDefaultstring:cvnDefaultstring:ct3:cvrDefaultstring:skuDefaultstring: dmi.product.family: X570 MB dmi.product.name: X570S AORUS MASTER dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2023-02-05T17:07:36.420620 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: KDE DistUpgraded: 2023-04-01 18:21:47,742 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: lunar DistroRelease: Ubuntu 23.04 DistroVariant: ubuntu DkmsStatus: openrazer-driver/3.4.0, 6.2.0-19-generic, x86_64: installed openrazer-driver/3.4.0, 6.2.0-20-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-19-generic, x86_64: installed xone/v0.3-1-g2467407, 6.2.0-20-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1849:5212] NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] [10de:2486] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GA104 [GeForce RTX 3060 Ti] [3842:3663] InstallationDate: Installed on 2022-01-14 (457 days ago) InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: Gigabyte Technology Co., Ltd. X570S AORUS MASTER Package:
[Desktop-packages] [Bug 1998267] Re: glib not aware of snap confinement
I tested a standard jammy desktop in a VM by running various apps including calculator to confirm they were still working (i.e. looking for regressions). I tested the core desktop behaviour by building the core22-desktop snap from https://github.com/canonical/core-base-desktop/ (locally modified to use updates) and then installing that into a core desktop. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1998267 Title: glib not aware of snap confinement Status in glib2.0 package in Ubuntu: Fix Released Status in glib2.0 source package in Jammy: Fix Committed Status in glib2.0 source package in Kinetic: Won't Fix Status in glib2.0 source package in Lunar: Fix Released Bug description: [ Impact] glib is not aware of snap confinement and this causes the internal logic to decide when to use portals to not work as designed. One important case is the gsettings backend, which should use a keyfile when confined rather than using dconf. When using a fully confined desktop this is required, as dconf is not suitable for sharing between snaps. This has been fixed in glib main: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3020 [ Test Plan ] (requires a core snap running the updated glib). 1. Install gnome-calculator snap: $ snap install gnome-calculator 2. Disconnect gsettings interface: $ snap disconnect gnome-calculator:gsettings 3. Run gnome-calculator 4. Change mode from basic to advanced 5. Close and re-open gnome-calculator Expected result: Mode change remembered on second run. gnome-calculator settings written to ~/snap/gnome-calculator/current/.config/glib-2.0/settings/keyfile Observed result: Mode change not remembered on second run, errors shown in console about accessing dconf: (gnome-calculator:1031938): dconf-CRITICAL **: 14:08:56.034: unable to create file '/run/user/1000/snap.gnome-calculator/dconf/user': Permission denied. dconf will not work properly. [ Where problems could occur ] - New bug introduced in glib causing a crash. - Security issue introduced in glib due to accessing snapctl. - Unexpected behaviour change when running snaps with updated glib. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1998267/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016987] Re: login screen not translated from English when doing no network Non-english install
** Package changed: gdm (Ubuntu) => gdm3 (Ubuntu) ** Also affects: gnome-shell (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gdm3 in Ubuntu. https://bugs.launchpad.net/bugs/2016987 Title: login screen not translated from English when doing no network Non- english install Status in ubuntu-desktop-installer: New Status in gdm3 package in Ubuntu: New Status in gnome-shell package in Ubuntu: New Bug description: Installing a non-english version of ubuntu with no network results in the login screen displaying words like 'password' in english, and the error message when inputting wrong password in english, and the 'users' button also in english. The clock however, is in the desired language, as is everything after logging in. ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: ubuntu-desktop-installer (not installed) ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 11:44:12 2023 InstallationDate: Installed on 2023-04-19 (0 days ago) InstallationMedia: Ubuntu 23.04 "Lunar Lobster" - Release amd64 (20230418) ProcEnviron: LANG=sv_SE.UTF-8 PATH=(custom, no user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: ubuntu-desktop-installer UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-desktop-installer/+bug/2016987/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2015962] Re: indicator-messages-service crashed with SIGSEGV in g_type_check_instance() from g_signal_handlers_disconnect_matched() from act_user_manager_finalize() from g_obje
** Changed in: indicator-messages (Ubuntu) Status: Invalid => In Progress ** Changed in: indicator-messages (Ubuntu) Assignee: (unassigned) => Sebastien Bacher (seb128) ** Changed in: ayatana-indicator-messages (Ubuntu) Status: New => Triaged ** Changed in: ayatana-indicator-messages (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to accountsservice in Ubuntu. https://bugs.launchpad.net/bugs/2015962 Title: indicator-messages-service crashed with SIGSEGV in g_type_check_instance() from g_signal_handlers_disconnect_matched() from act_user_manager_finalize() from g_object_unref() from im_accounts_service_dispose() Status in accountsservice: Fix Released Status in accountsservice package in Ubuntu: Fix Committed Status in ayatana-indicator-messages package in Ubuntu: Triaged Status in indicator-messages package in Ubuntu: In Progress Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding indicator-messages. This problem was most recently seen with package version 13.10.1+18.10.20180918-0ubuntu3, the problem page at https://errors.ubuntu.com/problem/94c77bb11d79da78a8cb610adb9252f41d2ab4a4 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/accountsservice/+bug/2015962/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1779890] Re: gvfsd process does not have the KRB5CCNAME environment set
** Patch removed: "debdiff for tracker-miners on Focal" https://bugs.launchpad.net/ubuntu/+source/tracker-miners/+bug/1779890/+attachment/5663487/+files/lp1779890_focal.debdiff ** Patch removed: "Debdiff for tracker-miners fix on Kinetic" https://bugs.launchpad.net/ubuntu/+source/tracker-miners/+bug/1779890/+attachment/5658668/+files/lp1779890_kinetic.debdiff ** Patch removed: "Debdiff for tracker-miners fix on Jammy" https://bugs.launchpad.net/ubuntu/+source/tracker-miners/+bug/1779890/+attachment/5658667/+files/lp1779890_jammy.debdiff ** Tags added: sts-sponsor -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1779890 Title: gvfsd process does not have the KRB5CCNAME environment set Status in gvfs package in Ubuntu: New Status in tracker-miners package in Ubuntu: Fix Released Status in gvfs source package in Bionic: New Status in tracker-miners source package in Bionic: Won't Fix Status in gvfs source package in Focal: New Status in tracker-miners source package in Focal: In Progress Status in gvfs source package in Jammy: New Status in tracker-miners source package in Jammy: In Progress Status in gvfs source package in Kinetic: New Status in tracker-miners source package in Kinetic: In Progress Status in gvfs source package in Lunar: New Status in tracker-miners source package in Lunar: Fix Released Bug description: [ Impact ] The KRB5CCNAME environment variable points to the Kerberos ticket of the current machine and this ticket is used for authentication in Active Directory servers. This variable is set by pam_sss when the user authenticates and can be used by other processes, such as gio, to skip the credentials input when accessing network shares, for example. Some services rely on gvfs-daemon in order to properly function, such as tracker-extract-3.service and tracker-miner-fs-3.service, which means they will ask for the gvfs-daemon to be initialized when they are executed by systemd. This creates problems if one service that relies on gvfsd is started too early, as it would result in gvfsd being started too early as well. As of version 3.1 of tracker-miners, the install target of tracker- miners-fs-3.service was set to gnome-session.target: https://gitlab.gnome.org/GNOME/tracker-miners/-/merge_requests/283 However, the tracker-extract-3.service was not updated and its target is still default.target, which is too early for the service to start. Starting tracker-extract too early is also starting gvfsd too early, before the session environment gets fully updated. Which means that gvfsd does not have the KRB5CCNAME variable and can not do any operations with it. Tracker-extract is supposed to be a helper service managed by tracker- miner-fs-3.service. By using a [Install] section, we are actually telling systemd that it should manage this service as well, when it shouldn't. So, by removing the [Install] section and having tracker-miner- fs-3.service being tied to gnome-session.target, we fix the issue of gvfsd starting too early without the updated session environment. [ Test Plan ] In order to test this issue, it's required to have an Active Directory server running. 1) Authenticate with an AD user (as this would set the KRB5CCNAME env); 2) Check gvfsd environment. This can be done by running: cat /proc/$(pidof gvfsd)/environ | xargs --null -n1 You will be able to see that it does not have the variable listed. 3) Check that the information mentioned above about tracker-miner-fs- 3.service is true. 4) Disable tracker-extract-3.service (This is a bit tricky, since its target was default.target. The easiest way is to remove the symlink that systemd created when enabling the unit, located under /etc/systemd/user/default.target.wants/tracker-extract-3.service 5) Reboot the machine; 6) Repeat steps 1 and 2. This will show that gvfsd is now started with the proper environment. Is not enough to look at ptree and the pids of the processes, instead it's better to look into the session logs with: journalctl --user -b And check the order in which the services were started and when they were triggered. Test packages are available in the following ppa: https://launchpad.net/~mruffell/+archive/ubuntu/sf320070-test After installing test packages of tracker-miners, KRB5CCNAME should be set in gvfs environment upon login to gnome. [ Where problems could occur ] The tracker project is a search engine that speeds up search operations in Gnome. The tracker-miners is the indexing daemon that populates the database with information, so changing its start does not affect the system behavior. This changes fix the startup of gvfs-daemon.service, which could delay services that relied on it running to be
[Desktop-packages] [Bug 2004021] Re: Moving video position /scrubbing in Totem (Videos) causes video to freeze (but not audio)
What CPU models are affected? Does uninstalling 'gstreamer1.0-vaapi' affect the situation? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to totem in Ubuntu. https://bugs.launchpad.net/bugs/2004021 Title: Moving video position /scrubbing in Totem (Videos) causes video to freeze (but not audio) Status in GStreamer: New Status in Totem: Fix Released Status in gstreamer package in Ubuntu: Confirmed Status in pitivi package in Ubuntu: Confirmed Status in totem package in Ubuntu: Confirmed Bug description: When playing videos in 22.04, moving the position will often cause the video to stop. The audio will work as expected. I found mention of this behavior here as well: https://gitlab.gnome.org/GNOME/totem/-/issues/526 To manage notifications about this bug go to: https://bugs.launchpad.net/gstreamer/+bug/2004021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1943752] Re: cheese does not work with laptop webcam in Ubuntu 21.10+
Fred J, I installed Ubuntu 22.10 on a liveusb then installed webcamoid using apt. I then logged out then logged back in then webcamoid worked. On Wed, Apr 19, 2023 at 2:11 PM Fred J <1943...@bugs.launchpad.net> wrote: > Dear Warren, > I just bought a HP Elite Dragonfly G3 and I of course ran into this > problem with cam. I have tried to install webcamoid but it didn't work! > Ubuntu 22.10 > Did I miss something? > Best > --Fred > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1943752 > > Title: > cheese does not work with laptop webcam in Ubuntu 21.10+ > > Status in cheese package in Ubuntu: > Confirmed > > Bug description: > Ubuntu 21.10 from live usb on a HP 840 G3 laptop > 1.Ubuntu Impish Indri (development branch) > 2.cheese version installed: 3.38.0-4, candidate: 3.38.0-4 > version table:***3.38.0-4 500 > 3.cheese should display an image from laptop camera after being opened. > 4.The error has reproduced by me on this hardware at least 4 times. > When opening the cheese app no image is displayed until closing and > reopening the app at least 3 times. The cheese app works as expected in > both Ubuntu 18.04 and Ubuntu 20.04. > > ProblemType: Bug > DistroRelease: Ubuntu 21.10 > Package: cheese 3.38.0-4 > ProcVersionSignature: Ubuntu 5.13.0-14.14-generic 5.13.1 > Uname: Linux 5.13.0-14-generic x86_64 > NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair > ApportVersion: 2.20.11-0ubuntu68 > Architecture: amd64 > CasperMD5CheckResult: pass > CasperVersion: 1.465 > CurrentDesktop: ubuntu:GNOME > Date: Wed Sep 15 17:10:23 2021 > LiveMediaBuild: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210915) > MachineType: HP HP EliteBook 840 G3 > ProcEnviron: >TERM=xterm-256color >PATH=(custom, no user) >XDG_RUNTIME_DIR= >LANG=en_US.UTF-8 >SHELL=/bin/bash > RelatedPackageVersions: >cheese3.38.0-4 >cheese-common 3.38.0-4 > SourcePackage: linux > UpgradeStatus: No upgrade log present (probably fresh install) > dmi.bios.date: 04/20/2021 > dmi.bios.release: 1.52 > dmi.bios.vendor: HP > dmi.bios.version: N75 Ver. 01.52 > dmi.board.name: 8079 > dmi.board.vendor: HP > dmi.board.version: KBC Version 85.79 > dmi.chassis.type: 10 > dmi.chassis.vendor: HP > dmi.ec.firmware.release: 133.121 > dmi.modalias: > dmi:bvnHP:bvrN75Ver.01.52:bd04/20/2021:br1.52:efr133.121:svnHP:pnHPEliteBook840G3:pvr:sku2FZ00UP#ABA:rvnHP:rn8079:rvrKBCVersion85.79:cvnHP:ct10:cvr: > dmi.product.family: 103C_5336AN HP EliteBook > dmi.product.name: HP EliteBook 840 G3 > dmi.product.sku: 2FZ00UP#ABA > dmi.sys.vendor: HP > lsusb: >Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub >Bus 001 Device 004: ID 04f2:b51c Chicony Electronics Co., Ltd HP HD > Camera >Bus 001 Device 003: ID 138a:003f Validity Sensors, Inc. VFS495 > Fingerprint Reader >Bus 001 Device 002: ID 154b:0054 PNY USB 2.0 FD >Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > --- > ProblemType: Bug > ApportVersion: 2.20.11-0ubuntu68 > Architecture: amd64 > AudioDevicesInUse: >USERPID ACCESS COMMAND >/dev/snd/controlC0: ubuntu 5074 F pulseaudio > CasperMD5CheckResult: pass > CasperVersion: 1.465 > CurrentDesktop: ubuntu:GNOME > DistroRelease: Ubuntu 21.10 > LiveMediaBuild: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210915) > Lsusb: >Bus 002 Device 002: ID 0781:5581 SanDisk Corp. Ultra >Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub >Bus 001 Device 003: ID 04f2:b51c Chicony Electronics Co., Ltd HP HD > Camera >Bus 001 Device 002: ID 138a:003f Validity Sensors, Inc. VFS495 > Fingerprint Reader >Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > MachineType: HP HP EliteBook 840 G3 > NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair > Package: linux (not installed) > ProcEnviron: >TERM=xterm-256color >PATH=(custom, no user) >XDG_RUNTIME_DIR= >LANG=en_US.UTF-8 >SHELL=/bin/bash > ProcFB: 0 i915drmfb > ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz > file=/cdrom/preseed/username.seed maybe-ubiquity quiet splash --- > ProcVersionSignature: Ubuntu 5.13.0-14.14-generic 5.13.1 > RelatedPackageVersions: >linux-restricted-modules-5.13.0-14-generic N/A >linux-backports-modules-5.13.0-14-generic N/A >linux-firmware 1.199 > RfKill: >0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > Tags: impish > Uname: Linux 5.13.0-14-generic x86_64 > UpgradeStatus: No upgrade log present (probably fresh install) > UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo > _MarkForUpload: True > dmi.bios.date: 04/20/2021 > dmi.bios.release: 1.52 > dmi.bios.vendor: HP > dmi.bios.version: N75 Ver. 01.52 > dmi.board.name: 8079 > dmi.board.vendor:
[Desktop-packages] [Bug 2013216] Re: Single click on title bar does not transfer focus to target window (server side decorations in Xorg sessions)
I am experiencing this same issue on Ubuntu 23.04 Beta -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/2013216 Title: Single click on title bar does not transfer focus to target window (server side decorations in Xorg sessions) Status in Mutter: Fix Released Status in mutter package in Ubuntu: Fix Committed Bug description: Single clicking the title bar of windows without a complex title bar (namely a title bar with additional buttons besides the close/maximinze/minimize) does not transfer focus to them. Reproduction recipe: 1. Open gnome-terminal. 2. Run xedit. 3. Focus gnome-terminal. 4. Click Xedit's title bar. Expected: Xedit has focus. Observed: gnome-terminal retains focus. . 5. Focus Xedit. 6. Click gnome-terminal's title bar. Expected and observed: Xedit relinquishes focus and gnome-terminal gets focus. I can reproduce this in my main, up to date Lunar system in Xorg and also in a virtual machine with the 2023-03-24 09:02 iso (https://cdimage.ubuntu.com/daily-live/current/lunar-desktop- amd64.iso). ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: gnome-shell 44.0-2ubuntu2 ProcVersionSignature: Ubuntu 6.2.0-18.18-generic 6.2.6 Uname: Linux 6.2.0-18-generic x86_64 ApportVersion: 2.26.0-0ubuntu2 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Wed Mar 29 11:53:02 2023 DisplayManager: gdm3 InstallationDate: Installed on 2022-05-16 (316 days ago) InstallationMedia: Xubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) RelatedPackageVersions: mutter-common 44.0-2ubuntu2 SourcePackage: gnome-shell UpgradeStatus: Upgraded to lunar on 2023-01-17 (70 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/mutter/+bug/2013216/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1700756] Re: HDMI not working
Still exists in Ubuntu 22.04 with NVidia driver 390.157 DP works HDMI shows as connected, but no output to monitor. HDMI cable works with Mac Monterey but DP does not. Nouveau driver works with both ports but the external display speed is very slow and choppy even if I add PiP and use both ports at 60Hz to drive half the screen each. So watching Netflix or any other stream is impossible to enjoy. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1700756 Title: HDMI not working Status in xorg package in Ubuntu: Won't Fix Bug description: Ever since updating nvidia driver to nvidia-381 the external HDMI connectors stopped working. Neither the native HDMI port nor HDMI over Thunderbolt works. The driver recognizes the external monitor (existence and resolution) but does not provide a picture. Thunderbolt #1 never worked before but Thunderbolt #2 and the HDMI port worked in 16.10. The ports are fine (I can boot into MacOS and find all three combinations working). ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: xorg 1:7.7+16ubuntu3 ProcVersionSignature: Ubuntu 4.10.0-24.28-generic 4.10.15 Uname: Linux 4.10.0-24-generic x86_64 NonfreeKernelModules: wl nvidia_uvm nvidia_drm nvidia_modeset nvidia .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 381.22 Thu May 4 00:55:03 PDT 2017 GCC version: gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ApportVersion: 2.20.4-0ubuntu4.1 Architecture: amd64 BootLog: CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: Budgie:GNOME Date: Tue Jun 27 14:18:06 2017 DistUpgraded: Fresh install DistroCodename: zesty DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. 3rd Gen Core processor Graphics Controller [106b:00f7] NVIDIA Corporation GK107M [GeForce GT 650M Mac Edition] [10de:0fd5] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. GK107M [GeForce GT 650M Mac Edition] [106b:00f2] InstallationDate: Installed on 2017-05-25 (32 days ago) InstallationMedia: Ubuntu-Budgie 17.04 "Zesty Zapus" - Release amd64 (20170412) LightdmLog: [+21747.08s] DEBUG: Seat seat0 changes active session to [+21750.55s] DEBUG: Seat seat0 changes active session to c2 [+21750.55s] DEBUG: Session c2 is already active MachineType: Apple Inc. MacBookPro10,1 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-24-generic.efi.signed root=UUID=873566f9-4c01-4dae-8ca9-99c95dfbe269 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/21/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP101.88Z.00EE.B03.1212211437 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-C3EC7CD22292981F dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro10,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-C3EC7CD22292981F dmi.modalias: dmi:bvnAppleInc.:bvrMBP101.88Z.00EE.B03.1212211437:bd12/21/2012:svnAppleInc.:pnMacBookPro10,1:pvr1.0:rvnAppleInc.:rnMac-C3EC7CD22292981F:rvrMacBookPro10,1:cvnAppleInc.:ct10:cvrMac-C3EC7CD22292981F: dmi.product.name: MacBookPro10,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.76-1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.0.3-1ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 17.0.3-1ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.19.3-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.9.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20170309-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.14-0ubuntu1 xserver.bootTime: Mon Jun 26 07:46:39 2017 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.19.3-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1700756/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More
[Desktop-packages] [Bug 2011415] Re: /usr/bin/software-properties-gtk:AttributeError:on_pktask_finish:net_status_changed
> bug added by the previous revision Tagging regression-update then, FTR, for future regression risk analysis. > That fix isn't relevant for releases after Focal; The necessary API exists for Jammy onwards. OK thanks. Then the correct bug task status for Jammy onwards is Invalid or maybe Fix Released, so I'll change that. ** Changed in: software-properties (Ubuntu) Status: Fix Committed => Invalid ** Tags added: regression-update ** Tags added: verification-needed verification-needed-focal -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2011415 Title: /usr/bin/software-properties- gtk:AttributeError:on_pktask_finish:net_status_changed Status in software-properties package in Ubuntu: Invalid Status in software-properties source package in Focal: Fix Committed Bug description: * Impact The change from the previous revision to handle connectivity change use an API not available on focal and trigger an exception * Test case - detach the system from ubuntu pro if it's attached - open software-properties - go the ubuntu pro tab - click on 'enable ubuntu pro' - while the dialog is open disconnect and reconnect the network - change the selection from manual token to PIN the UI should update and no error should be triggered Check also that the error reports stop for the new version (url referenced below) * Regression potential If the callback were not working as expected the UI could end up not responding to status change or not accepting the PIN or token entered, validate that the different methods still work as expected to register -- The Ubuntu Error Tracker has been receiving reports about a problem regarding software-properties. This problem was most recently seen with package version 0.99.9.11, the problem page at https://errors.ubuntu.com/problem/22525c20f3bbf4ac03854d8a844e8d5f746b2959 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2011415/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1943752] Re: cheese does not work with laptop webcam in Ubuntu 21.10+
Dear Warren, I just bought a HP Elite Dragonfly G3 and I of course ran into this problem with cam. I have tried to install webcamoid but it didn't work! Ubuntu 22.10 Did I miss something? Best --Fred -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cheese in Ubuntu. https://bugs.launchpad.net/bugs/1943752 Title: cheese does not work with laptop webcam in Ubuntu 21.10+ Status in cheese package in Ubuntu: Confirmed Bug description: Ubuntu 21.10 from live usb on a HP 840 G3 laptop 1.Ubuntu Impish Indri (development branch) 2.cheese version installed: 3.38.0-4, candidate: 3.38.0-4 version table:***3.38.0-4 500 3.cheese should display an image from laptop camera after being opened. 4.The error has reproduced by me on this hardware at least 4 times. When opening the cheese app no image is displayed until closing and reopening the app at least 3 times. The cheese app works as expected in both Ubuntu 18.04 and Ubuntu 20.04. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: cheese 3.38.0-4 ProcVersionSignature: Ubuntu 5.13.0-14.14-generic 5.13.1 Uname: Linux 5.13.0-14-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu68 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.465 CurrentDesktop: ubuntu:GNOME Date: Wed Sep 15 17:10:23 2021 LiveMediaBuild: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210915) MachineType: HP HP EliteBook 840 G3 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: cheese3.38.0-4 cheese-common 3.38.0-4 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/20/2021 dmi.bios.release: 1.52 dmi.bios.vendor: HP dmi.bios.version: N75 Ver. 01.52 dmi.board.name: 8079 dmi.board.vendor: HP dmi.board.version: KBC Version 85.79 dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.ec.firmware.release: 133.121 dmi.modalias: dmi:bvnHP:bvrN75Ver.01.52:bd04/20/2021:br1.52:efr133.121:svnHP:pnHPEliteBook840G3:pvr:sku2FZ00UP#ABA:rvnHP:rn8079:rvrKBCVersion85.79:cvnHP:ct10:cvr: dmi.product.family: 103C_5336AN HP EliteBook dmi.product.name: HP EliteBook 840 G3 dmi.product.sku: 2FZ00UP#ABA dmi.sys.vendor: HP lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 04f2:b51c Chicony Electronics Co., Ltd HP HD Camera Bus 001 Device 003: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint Reader Bus 001 Device 002: ID 154b:0054 PNY USB 2.0 FD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu68 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 5074 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.465 CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 21.10 LiveMediaBuild: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210915) Lsusb: Bus 002 Device 002: ID 0781:5581 SanDisk Corp. Ultra Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b51c Chicony Electronics Co., Ltd HP HD Camera Bus 001 Device 002: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP HP EliteBook 840 G3 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed maybe-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 5.13.0-14.14-generic 5.13.1 RelatedPackageVersions: linux-restricted-modules-5.13.0-14-generic N/A linux-backports-modules-5.13.0-14-generic N/A linux-firmware 1.199 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: impish Uname: Linux 5.13.0-14-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 04/20/2021 dmi.bios.release: 1.52 dmi.bios.vendor: HP dmi.bios.version: N75 Ver. 01.52 dmi.board.name: 8079 dmi.board.vendor: HP dmi.board.version: KBC Version 85.79 dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.ec.firmware.release: 133.121 dmi.modalias: dmi:bvnHP:bvrN75Ver.01.52:bd04/20/2021:br1.52:efr133.121:svnHP:pnHPEliteBook840G3:pvr:sku2FZ00UP#ABA:rvnHP:rn8079:rvrKBCVersion85.79:cvnHP:ct10:cvr: dmi.product.family: 103C_5336AN HP EliteBook dmi.product.name: HP EliteBook 840 G3 dmi.product.sku: 2FZ00UP#ABA dmi.sys.vendor:
[Desktop-packages] [Bug 2017027] Re: Sound device missing (monitor)
This shows what I see when I try to switch between audio output devices. ** Attachment added: "Screenshot of the Sound settings" https://bugs.launchpad.net/ubuntu/+source/gnome-session/+bug/2017027/+attachment/5665297/+files/Screenshot%20from%202023-04-19%2015-30-46.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-session in Ubuntu. https://bugs.launchpad.net/bugs/2017027 Title: Sound device missing (monitor) Status in gnome-session package in Ubuntu: New Bug description: GNOME isn't exposing the monitor audio device. It doesn't show up as an option to switch to in the Sound settings. This is the device, from 'lspci': > 03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller It's an LG ultrawide monitor connected via HDMI to an AMD Radeon RX 6600 graphics card. I'm reporting it against the Ubuntu session because I cannot reproduce this on a different desktop or distribution. I've recently tried Kubuntu 22.10 and Fedora 37, and both worked as expected. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: ubuntu-session 43.0-1ubuntu2 ProcVersionSignature: Ubuntu 5.19.0-40.41-generic 5.19.17 Uname: Linux 5.19.0-40-generic x86_64 ApportVersion: 2.23.1-0ubuntu3.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 15:24:31 2023 InstallationDate: Installed on 2023-04-17 (2 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) PackageArchitecture: all SourcePackage: gnome-session UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-session/+bug/2017027/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2017027] [NEW] Sound device missing (monitor)
Public bug reported: GNOME isn't exposing the monitor audio device. It doesn't show up as an option to switch to in the Sound settings. This is the device, from 'lspci': > 03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 > HDMI/DP Audio Controller It's an LG ultrawide monitor connected via HDMI to an AMD Radeon RX 6600 graphics card. I'm reporting it against the Ubuntu session because I cannot reproduce this on a different desktop or distribution. I've recently tried Kubuntu 22.10 and Fedora 37, and both worked as expected. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: ubuntu-session 43.0-1ubuntu2 ProcVersionSignature: Ubuntu 5.19.0-40.41-generic 5.19.17 Uname: Linux 5.19.0-40-generic x86_64 ApportVersion: 2.23.1-0ubuntu3.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 15:24:31 2023 InstallationDate: Installed on 2023-04-17 (2 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) PackageArchitecture: all SourcePackage: gnome-session UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-session (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug kinetic wayland-session -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-session in Ubuntu. https://bugs.launchpad.net/bugs/2017027 Title: Sound device missing (monitor) Status in gnome-session package in Ubuntu: New Bug description: GNOME isn't exposing the monitor audio device. It doesn't show up as an option to switch to in the Sound settings. This is the device, from 'lspci': > 03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller It's an LG ultrawide monitor connected via HDMI to an AMD Radeon RX 6600 graphics card. I'm reporting it against the Ubuntu session because I cannot reproduce this on a different desktop or distribution. I've recently tried Kubuntu 22.10 and Fedora 37, and both worked as expected. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: ubuntu-session 43.0-1ubuntu2 ProcVersionSignature: Ubuntu 5.19.0-40.41-generic 5.19.17 Uname: Linux 5.19.0-40-generic x86_64 ApportVersion: 2.23.1-0ubuntu3.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 15:24:31 2023 InstallationDate: Installed on 2023-04-17 (2 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) PackageArchitecture: all SourcePackage: gnome-session UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-session/+bug/2017027/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998267] Re: glib not aware of snap confinement
Thanks. I agree and I've added a hint. This should hopefully clear the flag on the next (Jammy) britney run. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1998267 Title: glib not aware of snap confinement Status in glib2.0 package in Ubuntu: Fix Released Status in glib2.0 source package in Jammy: Fix Committed Status in glib2.0 source package in Kinetic: Won't Fix Status in glib2.0 source package in Lunar: Fix Released Bug description: [ Impact] glib is not aware of snap confinement and this causes the internal logic to decide when to use portals to not work as designed. One important case is the gsettings backend, which should use a keyfile when confined rather than using dconf. When using a fully confined desktop this is required, as dconf is not suitable for sharing between snaps. This has been fixed in glib main: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3020 [ Test Plan ] (requires a core snap running the updated glib). 1. Install gnome-calculator snap: $ snap install gnome-calculator 2. Disconnect gsettings interface: $ snap disconnect gnome-calculator:gsettings 3. Run gnome-calculator 4. Change mode from basic to advanced 5. Close and re-open gnome-calculator Expected result: Mode change remembered on second run. gnome-calculator settings written to ~/snap/gnome-calculator/current/.config/glib-2.0/settings/keyfile Observed result: Mode change not remembered on second run, errors shown in console about accessing dconf: (gnome-calculator:1031938): dconf-CRITICAL **: 14:08:56.034: unable to create file '/run/user/1000/snap.gnome-calculator/dconf/user': Permission denied. dconf will not work properly. [ Where problems could occur ] - New bug introduced in glib causing a crash. - Security issue introduced in glib due to accessing snapctl. - Unexpected behaviour change when running snaps with updated glib. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1998267/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998267] Re: glib not aware of snap confinement
In the meantime, please could you confirm what [sorry, that's ambiguous; I mean *how*] you tested? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1998267 Title: glib not aware of snap confinement Status in glib2.0 package in Ubuntu: Fix Released Status in glib2.0 source package in Jammy: Fix Committed Status in glib2.0 source package in Kinetic: Won't Fix Status in glib2.0 source package in Lunar: Fix Released Bug description: [ Impact] glib is not aware of snap confinement and this causes the internal logic to decide when to use portals to not work as designed. One important case is the gsettings backend, which should use a keyfile when confined rather than using dconf. When using a fully confined desktop this is required, as dconf is not suitable for sharing between snaps. This has been fixed in glib main: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3020 [ Test Plan ] (requires a core snap running the updated glib). 1. Install gnome-calculator snap: $ snap install gnome-calculator 2. Disconnect gsettings interface: $ snap disconnect gnome-calculator:gsettings 3. Run gnome-calculator 4. Change mode from basic to advanced 5. Close and re-open gnome-calculator Expected result: Mode change remembered on second run. gnome-calculator settings written to ~/snap/gnome-calculator/current/.config/glib-2.0/settings/keyfile Observed result: Mode change not remembered on second run, errors shown in console about accessing dconf: (gnome-calculator:1031938): dconf-CRITICAL **: 14:08:56.034: unable to create file '/run/user/1000/snap.gnome-calculator/dconf/user': Permission denied. dconf will not work properly. [ Where problems could occur ] - New bug introduced in glib causing a crash. - Security issue introduced in glib due to accessing snapctl. - Unexpected behaviour change when running snaps with updated glib. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1998267/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2015697] Re: seahorse crashed with SIGSEGV in seahorse_place_get_label()
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Information type changed from Private Security to Public -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to seahorse in Ubuntu. https://bugs.launchpad.net/bugs/2015697 Title: seahorse crashed with SIGSEGV in seahorse_place_get_label() Status in seahorse package in Ubuntu: New Bug description: NA ProblemType: Crash DistroRelease: Ubuntu 23.04 Package: seahorse 43.0-1build1 ProcVersionSignature: Ubuntu 6.2.0-19.19-generic 6.2.6 Uname: Linux 6.2.0-19-generic x86_64 ApportVersion: 2.26.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Apr 9 14:09:25 2023 ExecutablePath: /usr/bin/seahorse InstallationDate: Installed on 2023-04-07 (2 days ago) InstallationMedia: Ubuntu 23.04 "Lunar Lobster" - Beta amd64 (20230329) ProcCmdline: /usr/bin/seahorse --gapplication-service ProcEnviron: LANG=en_US.UTF-8 PATH=(custom, no user) SHELL=/bin/bash XDG_RUNTIME_DIR= SegvAnalysis: Segfault happened at: 0x55e23ee570cd : mov 0x20(%rax),%rax PC (0x55e23ee570cd) ok source "0x20(%rax)" (0x0020) not located in a known VMA region (needed readable region)! destination "%rax" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: seahorse StacktraceTop: seahorse_place_get_label () ?? () g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: seahorse crashed with SIGSEGV in seahorse_place_get_label() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sudo users separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/seahorse/+bug/2015697/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1926218] Re: Disable or Remove FLoC features and the provider service
Closing as Floc has been removed and didn't come back. ** Changed in: chromium-browser (Ubuntu) Assignee: Nathan Teodosio (nteodosio) => (unassigned) ** Changed in: chromium-browser (Ubuntu) Status: Triaged => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1926218 Title: Disable or Remove FLoC features and the provider service Status in chromium-browser package in Ubuntu: Fix Released Bug description: Disable or remove entire FLoc, - FLoC component - Any other FLoC functionalities shipped in Chromium - FLoC client-side determinations of cohorts - Any reporting of FLoC cohort determinations to Google (or otherwise) servers (i.e., the reporting used for k-anonymity cohort protections) - FLoC JS methods (i.e. document.interestCohort) Brave, Vivaldi, Bromite have addressed FLoC issue and edge browser has disabled it Resources: https://github.com/brave/brave-core/pull/8468 https://answers.launchpad.net/ubuntu/+source/chromium-browser/+question/696632 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1926218/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2017014] [NEW] can't add private ppa raw entry wihout lp login
Public bug reported: While running somtething like: add-apt-repository --yes "deb https://user:secrets@private- ppa.launchpad.net/owner/ppa-name/ubuntu jammy main" it fails with: Traceback (most recent call last): File "/usr/bin/add-apt-repository", line 364, in sys.exit(0 if addaptrepo.main() else 1) File "/usr/bin/add-apt-repository", line 357, in main shortcut.add() File "/usr/lib/python3/dist-packages/softwareproperties/shortcuthandler.py", line 222, in add self.add_key() File "/usr/lib/python3/dist-packages/softwareproperties/shortcuthandler.py", line 398, in add_key if not all((self.trustedparts_file, self.trustedparts_content)): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 141, in trustedparts_content key = self.lpppa.getSigningKeyData() File "/usr/lib/python3/dist-packages/lazr/restfulclient/resource.py", line 592, in __call__ response, content = self.root._browser._request( File "/usr/lib/python3/dist-packages/lazr/restfulclient/_browser.py", line 429, in _request raise error lazr.restfulclient.errors.Unauthorized: HTTP Error 401: Unauthorized Response headers: --- -content-encoding: gzip content-length: 78 content-security-policy: frame-ancestors 'self'; content-type: text/plain;charset=utf-8 date: Wed, 19 Apr 2023 13:36:06 GMT server: gunicorn status: 401 strict-transport-security: max-age=15552000 vary: Accept,Accept-Encoding x-content-type-options: nosniff x-frame-options: SAMEORIGIN x-launchpad-revision: 473868c1cc6b58a9bc722c23840374c93a7a274b x-lazr-notifications: [] x-powered-by: Zope (www.zope.org), Python (www.python.org) x-request-id: 7744610e-481a-4489-ad5b-e9288c8b7588 x-vcs-revision: 473868c1cc6b58a9bc722c23840374c93a7a274b x-xss-protection: 1; mode=block --- Response body: --- b"(, 'getSigningKeyData', 'launchpad.SubscriberView')" I think is is an unhandled error in the PPAShortcutHandler and it should continue to the next one in the loop at, at least as the uri is not a `ppa:` one, see: https://git.launchpad.net/ubuntu/+source/software-properties/tree/softwareproperties/shortcuts.py?id=2bac9c4702ca203e4a2a5c12f00f50a223251e2d ** Affects: software-properties (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2017014 Title: can't add private ppa raw entry wihout lp login Status in software-properties package in Ubuntu: New Bug description: While running somtething like: add-apt-repository --yes "deb https://user:secrets@private- ppa.launchpad.net/owner/ppa-name/ubuntu jammy main" it fails with: Traceback (most recent call last): File "/usr/bin/add-apt-repository", line 364, in sys.exit(0 if addaptrepo.main() else 1) File "/usr/bin/add-apt-repository", line 357, in main shortcut.add() File "/usr/lib/python3/dist-packages/softwareproperties/shortcuthandler.py", line 222, in add self.add_key() File "/usr/lib/python3/dist-packages/softwareproperties/shortcuthandler.py", line 398, in add_key if not all((self.trustedparts_file, self.trustedparts_content)): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 141, in trustedparts_content key = self.lpppa.getSigningKeyData() File "/usr/lib/python3/dist-packages/lazr/restfulclient/resource.py", line 592, in __call__ response, content = self.root._browser._request( File "/usr/lib/python3/dist-packages/lazr/restfulclient/_browser.py", line 429, in _request raise error lazr.restfulclient.errors.Unauthorized: HTTP Error 401: Unauthorized Response headers: --- -content-encoding: gzip content-length: 78 content-security-policy: frame-ancestors 'self'; content-type: text/plain;charset=utf-8 date: Wed, 19 Apr 2023 13:36:06 GMT server: gunicorn status: 401 strict-transport-security: max-age=15552000 vary: Accept,Accept-Encoding x-content-type-options: nosniff x-frame-options: SAMEORIGIN x-launchpad-revision: 473868c1cc6b58a9bc722c23840374c93a7a274b x-lazr-notifications: [] x-powered-by: Zope (www.zope.org), Python (www.python.org) x-request-id: 7744610e-481a-4489-ad5b-e9288c8b7588 x-vcs-revision: 473868c1cc6b58a9bc722c23840374c93a7a274b x-xss-protection: 1; mode=block --- Response body: --- b"(, 'getSigningKeyData', 'launchpad.SubscriberView')" I think is is an unhandled error in the PPAShortcutHandler and it should continue to the next one in the loop at, at least as the uri is not a `ppa:` one, see: https://git.launchpad.net/ubuntu/+source/software-properties/tree/softwareproperties/shortcuts.py?id=2bac9c4702ca203e4a2a5c12f00f50a223251e2d To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2017014/+subscriptions -- Mailing list:
[Desktop-packages] [Bug 2017011] Re: [snap] unable to read /proc/pressure/{cpu, io, memory}
** Changed in: chromium-browser (Ubuntu) Status: New => Triaged ** Changed in: chromium-browser (Ubuntu) Importance: Undecided => Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/2017011 Title: [snap] unable to read /proc/pressure/{cpu,io,memory} Status in chromium-browser package in Ubuntu: Triaged Bug description: During normal operation, chromium wants to read /proc/pressure/{cpu,io,memory} but is denied by the Apparmor policy: $ journalctl -b0 -k --grep 'chromium.chromium' | grep -F 'name="/proc/pressure/' Apr 19 10:40:27 sdeziel-lemur kernel: audit: type=1400 audit(1681915227.726:817): apparmor="DENIED" operation="open" class="file" profile="snap.chromium.chromium" name="/proc/pressure/cpu" pid=395005 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 Apr 19 10:40:27 sdeziel-lemur kernel: audit: type=1400 audit(1681915227.726:818): apparmor="DENIED" operation="open" class="file" profile="snap.chromium.chromium" name="/proc/pressure/io" pid=395005 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 Apr 19 10:40:27 sdeziel-lemur kernel: audit: type=1400 audit(1681915227.726:819): apparmor="DENIED" operation="open" class="file" profile="snap.chromium.chromium" name="/proc/pressure/memory" pid=395005 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 Note that simply starting the browser doesn't prompt it try and read those files, you need to do something more involving like watching Youtube for example. Additional information: $ snap list chromium core20 Name VersionRev Tracking Publisher Notes chromium 112.0.5615.49 2424 latest/stable canonical✓ - core2020230308 1852 latest/stable canonical✓ base $ lsb_release -rd Description: Ubuntu 22.04.2 LTS Release: 22.04 $ uname -a Linux sdeziel-lemur 5.19.0-40-generic #41~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Mar 31 16:00:14 UTC 2 x86_64 x86_64 x86_64 GNU/Linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/2017011/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2017011] [NEW] [snap] unable to read /proc/pressure/{cpu, io, memory}
Public bug reported: During normal operation, chromium wants to read /proc/pressure/{cpu,io,memory} but is denied by the Apparmor policy: $ journalctl -b0 -k --grep 'chromium.chromium' | grep -F 'name="/proc/pressure/' Apr 19 10:40:27 sdeziel-lemur kernel: audit: type=1400 audit(1681915227.726:817): apparmor="DENIED" operation="open" class="file" profile="snap.chromium.chromium" name="/proc/pressure/cpu" pid=395005 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 Apr 19 10:40:27 sdeziel-lemur kernel: audit: type=1400 audit(1681915227.726:818): apparmor="DENIED" operation="open" class="file" profile="snap.chromium.chromium" name="/proc/pressure/io" pid=395005 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 Apr 19 10:40:27 sdeziel-lemur kernel: audit: type=1400 audit(1681915227.726:819): apparmor="DENIED" operation="open" class="file" profile="snap.chromium.chromium" name="/proc/pressure/memory" pid=395005 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 Note that simply starting the browser doesn't prompt it try and read those files, you need to do something more involving like watching Youtube for example. Additional information: $ snap list chromium core20 Name VersionRev Tracking Publisher Notes chromium 112.0.5615.49 2424 latest/stable canonical✓ - core2020230308 1852 latest/stable canonical✓ base $ lsb_release -rd Description:Ubuntu 22.04.2 LTS Release:22.04 $ uname -a Linux sdeziel-lemur 5.19.0-40-generic #41~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Mar 31 16:00:14 UTC 2 x86_64 x86_64 x86_64 GNU/Linux ** Affects: chromium-browser (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/2017011 Title: [snap] unable to read /proc/pressure/{cpu,io,memory} Status in chromium-browser package in Ubuntu: New Bug description: During normal operation, chromium wants to read /proc/pressure/{cpu,io,memory} but is denied by the Apparmor policy: $ journalctl -b0 -k --grep 'chromium.chromium' | grep -F 'name="/proc/pressure/' Apr 19 10:40:27 sdeziel-lemur kernel: audit: type=1400 audit(1681915227.726:817): apparmor="DENIED" operation="open" class="file" profile="snap.chromium.chromium" name="/proc/pressure/cpu" pid=395005 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 Apr 19 10:40:27 sdeziel-lemur kernel: audit: type=1400 audit(1681915227.726:818): apparmor="DENIED" operation="open" class="file" profile="snap.chromium.chromium" name="/proc/pressure/io" pid=395005 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 Apr 19 10:40:27 sdeziel-lemur kernel: audit: type=1400 audit(1681915227.726:819): apparmor="DENIED" operation="open" class="file" profile="snap.chromium.chromium" name="/proc/pressure/memory" pid=395005 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 Note that simply starting the browser doesn't prompt it try and read those files, you need to do something more involving like watching Youtube for example. Additional information: $ snap list chromium core20 Name VersionRev Tracking Publisher Notes chromium 112.0.5615.49 2424 latest/stable canonical✓ - core2020230308 1852 latest/stable canonical✓ base $ lsb_release -rd Description: Ubuntu 22.04.2 LTS Release: 22.04 $ uname -a Linux sdeziel-lemur 5.19.0-40-generic #41~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Mar 31 16:00:14 UTC 2 x86_64 x86_64 x86_64 GNU/Linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/2017011/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2015962] Re: indicator-messages-service crashed with SIGSEGV in g_type_check_instance() from g_signal_handlers_disconnect_matched() from act_user_manager_finalize() from g_obje
Going forward we need to remove indicator-messages and use the ayatana one which is maintained and switch the flavors to use that one but removing those binaries for the build for now would probably make sense yes -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ayatana-indicator-messages in Ubuntu. https://bugs.launchpad.net/bugs/2015962 Title: indicator-messages-service crashed with SIGSEGV in g_type_check_instance() from g_signal_handlers_disconnect_matched() from act_user_manager_finalize() from g_object_unref() from im_accounts_service_dispose() Status in accountsservice: Fix Released Status in accountsservice package in Ubuntu: Fix Committed Status in ayatana-indicator-messages package in Ubuntu: New Status in indicator-messages package in Ubuntu: Invalid Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding indicator-messages. This problem was most recently seen with package version 13.10.1+18.10.20180918-0ubuntu3, the problem page at https://errors.ubuntu.com/problem/94c77bb11d79da78a8cb610adb9252f41d2ab4a4 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/accountsservice/+bug/2015962/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 827695]
*** Bug 154892 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/827695 Title: [Upstream] bug in displaying scalable square brackets in math object Status in LibreOffice: Confirmed Status in OpenOffice: Confirmed Status in libreoffice package in Ubuntu: Confirmed Status in openoffice.org package in Ubuntu: Won't Fix Bug description: 1) lsb_release -rd Description: Ubuntu 11.04 Release: 11.04 2) apt-cache policy libreoffice-writer libreoffice-writer: Installed: 1:3.3.3-1ubuntu2 Candidate: 1:3.3.3-1ubuntu2 Version table: *** 1:3.3.3-1ubuntu2 0 100 /var/lib/dpkg/status 1:3.3.2-1ubuntu5 0 500 http://us.archive.ubuntu.com/ubuntu/ natty-updates/main i386 Packages 1:3.3.2-1ubuntu4 0 500 http://us.archive.ubuntu.com/ubuntu/ natty/main i386 Packages 3) When is expected to happen in LibreOffice Writer via a terminal: cd ~/Desktop && wget https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/827695/+attachment/2284273/+files/bracket_example.odt && lowriter --nologo bracket_example.odt is the scalable square brackets look as they would in Word. Latex also shows the desired bracket shape as per https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/827695/+attachment/2287347/+files/latex_brackets.pdf . 4) What happens instead is the top and bottom part of the bracket look like a square instead of a line pointing inwards towards the equation. To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/827695/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1987976] Re: firefox black window on wayland
Mentioned under "Known Issues" in the lunar release notes. ** Changed in: ubuntu-release-notes Status: New => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1987976 Title: firefox black window on wayland Status in Mozilla Firefox: Confirmed Status in Mutter: New Status in Release Notes for Ubuntu: Fix Released Status in firefox package in Ubuntu: Confirmed Status in mutter package in Ubuntu: Fix Committed Bug description: nicolas@nicolas-fixe:~$ lsb_release -rd Description: Ubuntu 22.04.1 LTS Release: 22.04 nicolas@nicolas-fixe:~$ apt-cache policy firefox firefox: Installé : 1:1snap1-0ubuntu2 Candidat : 1:1snap1-0ubuntu2 Table de version : *** 1:1snap1-0ubuntu2 500 500 http://fr.archive.ubuntu.com/ubuntu jammy/main amd64 Packages 100 /var/lib/dpkg/status When I boot Ubuntu and start Firefox, the Firefox's window is totally black. See attachment. I am at your disposal to answer any question you have. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: firefox 1:1snap1-0ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-46.49-generic 5.15.39 Uname: Linux 5.15.0-46-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Aug 28 12:42:29 2022 InstallationDate: Installed on 2022-08-25 (2 days ago) InstallationMedia: Ubuntu 22.04.1 LTS "Jammy Jellyfish" - Release amd64 (20220809.1) ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash Snap.Changes: aucun changement trouvé SourcePackage: firefox UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1987976/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1968907] Re: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed
Thanks for the fix! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-session in Ubuntu. https://bugs.launchpad.net/bugs/1968907 Title: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed Status in gnome-session: Fix Released Status in gnome-session package in Ubuntu: Fix Released Bug description: Hi, I see the following errors in the system logs: # journalctl | grep gnome-session-binary Apr 13 18:22:54 vougeot gnome-session[3453]: gnome-session-binary[3453]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed Apr 13 18:22:54 vougeot gnome-session[3453]: gnome-session-binary[3453]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed Apr 13 18:22:54 vougeot gnome-session-binary[3453]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed Apr 13 18:22:54 vougeot gnome-session-binary[3453]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: gnome-session-bin 42.0-1ubuntu2 Uname: Linux 5.17.2-051702-generic x86_64 ApportVersion: 2.20.11-0ubuntu81 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: KDE Date: Wed Apr 13 19:48:49 2022 RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: gnome-session UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-session/+bug/1968907/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2003339] Re: kwin_x11: The X11 connection broke: I/O error (code 1)
will the fix be available in 22.04 lts without using ppa any time soon? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2003339 Title: kwin_x11: The X11 connection broke: I/O error (code 1) Status in KDE Base Workspace: Fix Released Status in Mesa: Fix Released Status in kwin package in Ubuntu: Invalid Status in mesa package in Ubuntu: Fix Released Status in kwin package in Debian: New Bug description: ... To manage notifications about this bug go to: https://bugs.launchpad.net/kdebase-workspace/+bug/2003339/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016708] Re: Characters search through GNOME Shell is broken
** Summary changed: - Characthers search through GNOME Shell is broken + Characters search through GNOME Shell is broken -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-characters in Ubuntu. https://bugs.launchpad.net/bugs/2016708 Title: Characters search through GNOME Shell is broken Status in gnome-characters package in Ubuntu: Fix Committed Bug description: [ Impact ] Searching for characters in gnome shell does not bring any result [ Test Case ] - Having gnome-characters installed - Open the overview (hit super), search for "pizza" - The "pizza slice" character should show in the search results: [ Regression potential ] The shell search provider is never stopped once done. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-characters/+bug/2016708/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2015962] Re: indicator-messages-service crashed with SIGSEGV in g_type_check_instance() from g_signal_handlers_disconnect_matched() from act_user_manager_finalize() from g_obje
** Also affects: ayatana-indicator-messages (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to accountsservice in Ubuntu. https://bugs.launchpad.net/bugs/2015962 Title: indicator-messages-service crashed with SIGSEGV in g_type_check_instance() from g_signal_handlers_disconnect_matched() from act_user_manager_finalize() from g_object_unref() from im_accounts_service_dispose() Status in accountsservice: Fix Released Status in accountsservice package in Ubuntu: Fix Committed Status in ayatana-indicator-messages package in Ubuntu: New Status in indicator-messages package in Ubuntu: Invalid Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding indicator-messages. This problem was most recently seen with package version 13.10.1+18.10.20180918-0ubuntu3, the problem page at https://errors.ubuntu.com/problem/94c77bb11d79da78a8cb610adb9252f41d2ab4a4 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/accountsservice/+bug/2015962/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1987137] Re: Migrating chromium-browser to core22 has libwayland-client0 issues
** Changed in: chromium-browser (Ubuntu) Status: New => Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1987137 Title: Migrating chromium-browser to core22 has libwayland-client0 issues Status in chromium-browser package in Ubuntu: Fix Committed Bug description: Following on an earlier bug report that related to simple core22 migration for chromium-browser, here is a blocker that I don't know how to deal with. After checking out the core22 branch from git+ssh://git.launchpad.net/~chromium-core22/+git/chromium-core22 (which already contains the early, easy migration commits), doing a build eventually generates (snippet here): 2022-08-19 20:15:05.809 :: In file included from ../../third_party/wayland/src/src/wayland-client.h:40: 2022-08-19 20:15:05.809 :: /usr/include/wayland-client-protocol.h:1038:13: error: use of undeclared identifier 'wl_proxy_marshal_flags' 2022-08-19 20:15:05.809 :: callback = wl_proxy_marshal_flags((struct wl_proxy *) wl_display, 2022-08-19 20:15:05.809 ::^ 2022-08-19 20:15:05.809 :: /usr/include/wayland-client-protocol.h:1062:13: error: use of undeclared identifier 'wl_proxy_marshal_flags' 2022-08-19 20:15:05.810 :: registry = wl_proxy_marshal_flags((struct wl_proxy *) wl_display, 2022-08-19 20:15:05.810 ::^ 2022-08-19 20:15:05.810 :: /usr/include/wayland-client-protocol.h:1175:7: error: use of undeclared identifier 'wl_proxy_marshal_flags' 2022-08-19 20:15:05.810 :: id = wl_proxy_marshal_flags((struct wl_proxy *) wl_registry, 2022-08-19 20:15:05.810 :: ^ 2022-08-19 20:15:05.810 :: /usr/include/wayland-client-protocol.h:1291:7: error: use of undeclared identifier 'wl_proxy_marshal_flags' 2022-08-19 20:15:05.810 :: id = wl_proxy_marshal_flags((struct wl_proxy *) wl_compositor, and lots more of the same; it seems pretty clear that the relevant wayland library is simply not new enough, and I don't know what to add/modify to add core22 support to the mix, so I am open to suggestions. I do notice the file parts/chromium/build/chrome/installer/linux/debian/dist_package_versions.json, which contains package version manifests for various distros, but not Ubuntu 22.04, so I'm *guessing* that might need enhancement. But that's just a guess. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1987137/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1968383] Re: Touchpad gesture animations trigger Object St.Button (0x56439bd53160), has been already disposed — impossible to get any property from it. This might be caused by
** Changed in: gnome-shell Status: New => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1968383 Title: Touchpad gesture animations trigger Object St.Button (0x56439bd53160), has been already disposed — impossible to get any property from it. This might be caused by the object having been destroyed from C code using something such as destroy(), dispose(), or remove() vfuncs. [windowPreview.js:566] Status in GNOME Shell: Fix Released Status in gnome-shell package in Ubuntu: Fix Committed Bug description: Ubuntu 22.04 development fully updated as of time of this report. On a fresh boot, as soon as you open some applications and do the up touchpad gesture to enter the application grid and then back down to return to the desktop, journal spits out js stacktrace. If you don't trigger the crash then try opening and closing an app and trying again. Apr 08 18:46:18 x1c gnome-shell[1782]: Object St.Button (0x56439a2fd220), has been already disposed — impossible to get any property from it. This might be caused by the object having been destroyed from C code using something such as destroy(), dispose(), or remove() vfuncs. Apr 08 18:46:18 x1c gnome-shell[1782]: == Stack trace for context 0x564398f2e170 == Apr 08 18:46:18 x1c gnome-shell[1782]: #0 56439bea4058 i resource:///org/gnome/shell/ui/windowPreview.js:566 (3be09010ac40 @ 10) Apr 08 18:46:18 x1c gnome-shell[1782]: == Stack trace for context 0x564398f2e170 == Apr 08 18:46:18 x1c gnome-shell[1782]: #0 56439bea4058 i resource:///org/gnome/shell/ui/windowPreview.js:567 (3be09010ac40 @ 36) Apr 08 18:46:18 x1c gnome-shell[1782]: == Stack trace for context 0x564398f2e170 == Apr 08 18:46:18 x1c gnome-shell[1782]: #0 56439bea4058 i resource:///org/gnome/shell/ui/windowPreview.js:570 (3be09010ac40 @ 77) Apr 08 18:46:18 x1c gnome-shell[1782]: Object St.Label (0x56439a2e4c80), has been already disposed — impossible to get any property from it. This might be caused by the object having been destroyed from C code using something such as destroy(), dispose(), or remove() vfuncs. Apr 08 18:46:18 x1c gnome-shell[1782]: Object .Gjs_ui_windowPreview_WindowPreview (0x56439a324ef0), has been already disposed — impossible to get any property from it. This might be caused by the object having been destroyed from C code using something such as destroy(), dispose(), or remove() vfuncs. To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1968383/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016855] Re: padlock icon is missing sometimes
Here is a reason you might want to rank this bug higher than the current "low" rank. People may navigate into read-only data via links or favourites or the "back" navigation so it might not be apparent what is read-only. It is conceivable that not all applications indicate read-only data, or indicate it in a prominent way for visually impaired people or tired people who are not visually impaired, so the user might waste some time modifying it. Even though saving to a different place preserves work, it's annoying and annoyance is disruptive to work. They might want to make changes to a similar or identical file elsewhere so padlocks should be visible on all directories that should have them. That way the user knows as early as possible to direct his attention elsewhere. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/2016855 Title: padlock icon is missing sometimes Status in nautilus package in Ubuntu: New Bug description: The directory icon modifier which is the padlock is missing from a child directory after a recursive "read-only" chmod on a parent directory. This bug has been around for years. Full description at... https://askubuntu.com/questions/1462795/padlock-on-directory-icons-may-be-missing ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: nautilus 1:3.36.3-0ubuntu1.20.04.2 ProcVersionSignature: Ubuntu 5.15.0-69.76~20.04.1-generic 5.15.87 Uname: Linux 5.15.0-69-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.26 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Tue Apr 18 05:38:36 2023 GsettingsChanges: b'org.gnome.nautilus.window-state' b'initial-size' b'(1080, 749)' b'org.gnome.nautilus.preferences' b'show-image-thumbnails' b"'never'" b'org.gnome.nautilus.preferences' b'default-folder-viewer' b"'list-view'" b'org.gnome.nautilus.list-view' b'default-visible-columns' b"['name', 'size', 'date_modified', 'date_modified_with_time', 'starred']" b'org.gnome.nautilus.list-view' b'default-column-order' b"['name', 'size', 'type', 'owner', 'group', 'permissions', 'where', 'date_modified', 'date_modified_with_time', 'date_accessed', 'recency', 'starred', 'detailed_type']" InstallationDate: Installed on 2022-08-27 (233 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_nautilus: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/2016855/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1987137] Re: Migrating chromium-browser to core22 has libwayland-client0 issues
Good news, I got core22 on edge/hwacc. The problems here list apparently went away in the meantime. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1987137 Title: Migrating chromium-browser to core22 has libwayland-client0 issues Status in chromium-browser package in Ubuntu: New Bug description: Following on an earlier bug report that related to simple core22 migration for chromium-browser, here is a blocker that I don't know how to deal with. After checking out the core22 branch from git+ssh://git.launchpad.net/~chromium-core22/+git/chromium-core22 (which already contains the early, easy migration commits), doing a build eventually generates (snippet here): 2022-08-19 20:15:05.809 :: In file included from ../../third_party/wayland/src/src/wayland-client.h:40: 2022-08-19 20:15:05.809 :: /usr/include/wayland-client-protocol.h:1038:13: error: use of undeclared identifier 'wl_proxy_marshal_flags' 2022-08-19 20:15:05.809 :: callback = wl_proxy_marshal_flags((struct wl_proxy *) wl_display, 2022-08-19 20:15:05.809 ::^ 2022-08-19 20:15:05.809 :: /usr/include/wayland-client-protocol.h:1062:13: error: use of undeclared identifier 'wl_proxy_marshal_flags' 2022-08-19 20:15:05.810 :: registry = wl_proxy_marshal_flags((struct wl_proxy *) wl_display, 2022-08-19 20:15:05.810 ::^ 2022-08-19 20:15:05.810 :: /usr/include/wayland-client-protocol.h:1175:7: error: use of undeclared identifier 'wl_proxy_marshal_flags' 2022-08-19 20:15:05.810 :: id = wl_proxy_marshal_flags((struct wl_proxy *) wl_registry, 2022-08-19 20:15:05.810 :: ^ 2022-08-19 20:15:05.810 :: /usr/include/wayland-client-protocol.h:1291:7: error: use of undeclared identifier 'wl_proxy_marshal_flags' 2022-08-19 20:15:05.810 :: id = wl_proxy_marshal_flags((struct wl_proxy *) wl_compositor, and lots more of the same; it seems pretty clear that the relevant wayland library is simply not new enough, and I don't know what to add/modify to add core22 support to the mix, so I am open to suggestions. I do notice the file parts/chromium/build/chrome/installer/linux/debian/dist_package_versions.json, which contains package version manifests for various distros, but not Ubuntu 22.04, so I'm *guessing* that might need enhancement. But that's just a guess. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1987137/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016993] [NEW] When transferring files progress icon is not updated correctly
Public bug reported: When you use Nautilus to transfer files from A to B, after successful file transfer, icon that show progress, remains as work in progress, even if it should be changed to 100% done or neutral. Steps to reproduce: 1) Move larger directory to see the transfer progress (reproduced using AWS s3) 2) Wait for the finished file transfer and observe the icon 3) Icon shows WIP progress picture but it should show DONE progress picture (or neutral). ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: nautilus 1:44.0-1ubuntu2 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 14:02:49 2023 GsettingsChanges: b'org.gnome.nautilus.icon-view' b'default-zoom-level' b"'small-plus'" b'org.gnome.nautilus.preferences' b'default-folder-viewer' b"'list-view'" b'org.gnome.nautilus.preferences' b'migrated-gtk-settings' b'true' b'org.gnome.nautilus.window-state' b'initial-size' b'(1110, 795)' InstallationDate: Installed on 2020-12-15 (854 days ago) InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Release amd64 (20201022) SourcePackage: nautilus UpgradeStatus: Upgraded to lunar on 2023-04-08 (10 days ago) usr_lib_nautilus: file-roller 43.0-1 nautilus-extension-gnome-terminal 3.48.0-1ubuntu1 ** Affects: nautilus (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lunar wayland-session ** Attachment added: "Screen shot of WIP progress indicator icon after finished transfer" https://bugs.launchpad.net/bugs/2016993/+attachment/5665211/+files/progress-indicator-example.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/2016993 Title: When transferring files progress icon is not updated correctly Status in nautilus package in Ubuntu: New Bug description: When you use Nautilus to transfer files from A to B, after successful file transfer, icon that show progress, remains as work in progress, even if it should be changed to 100% done or neutral. Steps to reproduce: 1) Move larger directory to see the transfer progress (reproduced using AWS s3) 2) Wait for the finished file transfer and observe the icon 3) Icon shows WIP progress picture but it should show DONE progress picture (or neutral). ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: nautilus 1:44.0-1ubuntu2 ProcVersionSignature: Ubuntu 6.2.0-20.20-generic 6.2.6 Uname: Linux 6.2.0-20-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 14:02:49 2023 GsettingsChanges: b'org.gnome.nautilus.icon-view' b'default-zoom-level' b"'small-plus'" b'org.gnome.nautilus.preferences' b'default-folder-viewer' b"'list-view'" b'org.gnome.nautilus.preferences' b'migrated-gtk-settings' b'true' b'org.gnome.nautilus.window-state' b'initial-size' b'(1110, 795)' InstallationDate: Installed on 2020-12-15 (854 days ago) InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Release amd64 (20201022) SourcePackage: nautilus UpgradeStatus: Upgraded to lunar on 2023-04-08 (10 days ago) usr_lib_nautilus: file-roller 43.0-1 nautilus-extension-gnome-terminal 3.48.0-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/2016993/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016217] Re: gnome-shell crashed with SIGSEGV in clutter_actor_remove_effect() from st_scroll_view_dispose() from g_object_unref() from GjsAutoPointer() from GjsAutoPointer()
** Changed in: gnome-shell Status: Unknown => New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/2016217 Title: gnome-shell crashed with SIGSEGV in clutter_actor_remove_effect() from st_scroll_view_dispose() from g_object_unref() from GjsAutoPointer() from GjsAutoPointer() Status in GNOME Shell: New Status in gnome-shell package in Ubuntu: New Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding gnome-shell. This problem was most recently seen with package version 44.0-2ubuntu3, the problem page at https://errors.ubuntu.com/problem/677a794c2788cd0244c8fc6d7d34780a85127bc9 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. #0 0x7f3aa429dd82 in clutter_actor_remove_effect (self=self@entry=0x55d60fa59e90, effect=0x55d6101c48a0) at ../clutter/clutter/clutter-actor.c:14830 __inst = 0x55d6101c48a0 __t = 94377826055744 __r = _g_boolean_var_274 = __func__ = "clutter_actor_remove_effect" #1 0x7f3aa3f9d27f in st_scroll_view_dispose (object=0x55d60fa59e90) at ../src/st/st-scroll-view.c:246 priv = 0x55d60fa59a00 #2 0x7f3aa4aeada0 in g_object_unref (_object=0x55d60fa59e90) at ../../../gobject/gobject.c:3891 _pp = gaig_temp = gaig_temp = weak_locations = nqueue = 0x55d60fa6da60 _ptr = object = 0x55d60fa59e90 old_ref = retry_atomic_decrement1 = __func__ = "g_object_unref" #3 0x7f3aa43b4b2c in GjsAutoPointer<_GObject, void, _object_unref, _object_ref>::reset (ptr=0x0, this=) at ../gjs/jsapi-util.h:229 old_ptr = #4 GjsAutoPointer<_GObject, void, _object_unref, _object_ref>::~GjsAutoPointer (this=, this=) at ../gjs/jsapi-util.h:172 No locals. #5 GjsSmartPointer<_GObject>::~GjsSmartPointer (this=, this=) at ../gjs/jsapi-util.h:349 No locals. #6 ObjectInstance::release_native_object (this=0x55d60fa0ce80) at /usr/src/gjs-1.76.0-1/obj-x86_64-linux-gnu/../gi/object.cpp:1524 No locals. #7 ObjectInstance::release_native_object (this=0x55d60fa0ce80) at /usr/src/gjs-1.76.0-1/obj-x86_64-linux-gnu/../gi/object.cpp:1500 No locals. #8 0x7f3aa43c9ec0 in ObjectInstance::~ObjectInstance (this=, this=) at /usr/src/gjs-1.76.0-1/obj-x86_64-linux-gnu/../gi/object.cpp:1945 was_using_toggle_refs = false had_toggle_up = false had_toggle_down = had_toggle_up = had_toggle_down = was_using_toggle_refs = #9 GIWrapperInstance::finalize_impl (this=0x55d60fa0ce80) at ../gi/wrapperutils.h:1113 No locals. #10 ObjectInstance::finalize_impl (gcx=, obj=0x35b1abd24820, this=0x55d60fa0ce80) at /usr/src/gjs-1.76.0-1/obj-x86_64-linux-gnu/../gi/object.cpp:1912 query = {type = 94377830362416, type_name = 0x7f3aa3fdcda6 "StScrollView", class_size = 664, instance_size = 48} query = _g_boolean_var_74 = #11 GIWrapperBase::finalize (gcx=, obj=0x35b1abd24820) at ../gi/wrapperutils.h:411 priv = 0x55d60fa0ce80 To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/2016217/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016972] Re: Chromium snap does not support Intel Raptor Lake (13th gen)
Chromium built with core22 is available at edge/hwacc. It would be great if you could test it on the target hardware. I ran the manual tests and could detect no regression, although I can’t test video playback due to a bug I’ve hit (unrelated to Chromium). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/2016972 Title: Chromium snap does not support Intel Raptor Lake (13th gen) Status in chromium-browser package in Ubuntu: In Progress Bug description: The Chromium snap does not support Intel Raptor Lake (13th gen). RPL support was added in Mesa version 22.2.0 and our snaps contain: • /snap/gnome-3-38-2004: Mesa version 21.2.6 • /snap/gnome-42-2204: Mesa version 22.2.5 So the way forward is to get the chromium snap to use gnome-42-2204 (right now Chromium uses 3-38-2004). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/2016972/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016990] [NEW] [Lunar] Irregular FPS with Path of Exile
Public bug reported: I'm having a strange issue with the game Path of Exile (free). With Ubuntu Wayland session, vsync on, I get very irregular frame rates, it jumps around 40 fps. If I switch to Plasma Wayland the game is very smooth 60 fps. I'm running the game from Steam with Proton. I've tried Proton Experimental and Proton 8.0 so far, no difference. The game uses Vulkan so I guess it's being allowed to set up all the swap and presentation stuff pretty much itself... ? MUTTER_DEBUG_DISABLE_TRIPLE_BUFFERING=1 doesn't help Mutter so it's not strictly related to triple buffering, which makes sense since it's a full screen game anyway. Kernel: 6.2.0-1003-lowlatency GPU: Radeon 6800 XT CPU: Ryzen 9 5900X ** Affects: mutter (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/2016990 Title: [Lunar] Irregular FPS with Path of Exile Status in mutter package in Ubuntu: New Bug description: I'm having a strange issue with the game Path of Exile (free). With Ubuntu Wayland session, vsync on, I get very irregular frame rates, it jumps around 40 fps. If I switch to Plasma Wayland the game is very smooth 60 fps. I'm running the game from Steam with Proton. I've tried Proton Experimental and Proton 8.0 so far, no difference. The game uses Vulkan so I guess it's being allowed to set up all the swap and presentation stuff pretty much itself... ? MUTTER_DEBUG_DISABLE_TRIPLE_BUFFERING=1 doesn't help Mutter so it's not strictly related to triple buffering, which makes sense since it's a full screen game anyway. Kernel: 6.2.0-1003-lowlatency GPU: Radeon 6800 XT CPU: Ryzen 9 5900X To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/2016990/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1987976] Re: firefox black window on wayland
** Also affects: ubuntu-release-notes Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1987976 Title: firefox black window on wayland Status in Mozilla Firefox: Confirmed Status in Mutter: New Status in Release Notes for Ubuntu: New Status in firefox package in Ubuntu: Confirmed Status in mutter package in Ubuntu: Fix Committed Bug description: nicolas@nicolas-fixe:~$ lsb_release -rd Description: Ubuntu 22.04.1 LTS Release: 22.04 nicolas@nicolas-fixe:~$ apt-cache policy firefox firefox: Installé : 1:1snap1-0ubuntu2 Candidat : 1:1snap1-0ubuntu2 Table de version : *** 1:1snap1-0ubuntu2 500 500 http://fr.archive.ubuntu.com/ubuntu jammy/main amd64 Packages 100 /var/lib/dpkg/status When I boot Ubuntu and start Firefox, the Firefox's window is totally black. See attachment. I am at your disposal to answer any question you have. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: firefox 1:1snap1-0ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-46.49-generic 5.15.39 Uname: Linux 5.15.0-46-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Aug 28 12:42:29 2022 InstallationDate: Installed on 2022-08-25 (2 days ago) InstallationMedia: Ubuntu 22.04.1 LTS "Jammy Jellyfish" - Release amd64 (20220809.1) ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash Snap.Changes: aucun changement trouvé SourcePackage: firefox UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1987976/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1968390] Re: JS ERROR: TypeError: this.window_container is null
** Changed in: gnome-shell Status: New => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1968390 Title: JS ERROR: TypeError: this.window_container is null Status in GNOME Shell: Fix Released Status in gnome-shell package in Ubuntu: Fix Committed Bug description: Ubuntu 22.04 Development A 3 finger touchpad swipe up/down gesture with 1 application open outputs a lot of JS errors and stacks to the journal. This issue may be the same or related to https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1968383 but the output is somewhat different when you have more than 1 app open. This also happens with all extensions disabled, does not happen in Fedora 36. To reproduce 1. login and open terminal and watch the journal 2. perform the 3 finger swipe up gesture until the app grid displays then swipe down to go back to the desktop. 3. See journal 4. If nothing happens try opening an app, closing it and try again. Apr 08 21:18:49 x1c gnome-shell[21675]: JS ERROR: TypeError: this.window_container is null hideOverlay@resource:///org/gnome/shell/ui/windowPreview.js:373:9 vfunc_leave_event/this._idleHideOverlayId<@resource:///org/gnome/shell/ui/windowPreview.js:571:26 To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1968390/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016217] Re: gnome-shell crashed with SIGSEGV in clutter_actor_remove_effect() from st_scroll_view_dispose() from g_object_unref() from GjsAutoPointer() from GjsAutoPointer()
Looks closest to https://gitlab.gnome.org/GNOME/gnome- shell/-/issues/6521 ** Bug watch added: gitlab.gnome.org/GNOME/gnome-shell/-/issues #6521 https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6521 ** Also affects: gnome-shell via https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6521 Importance: Unknown Status: Unknown ** Description changed: The Ubuntu Error Tracker has been receiving reports about a problem regarding gnome-shell. This problem was most recently seen with package version 44.0-2ubuntu3, the problem page at https://errors.ubuntu.com/problem/677a794c2788cd0244c8fc6d7d34780a85127bc9 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. + + #0 0x7f3aa429dd82 in clutter_actor_remove_effect (self=self@entry=0x55d60fa59e90, effect=0x55d6101c48a0) at ../clutter/clutter/clutter-actor.c:14830 + __inst = 0x55d6101c48a0 + __t = 94377826055744 + __r = + _g_boolean_var_274 = + __func__ = "clutter_actor_remove_effect" + #1 0x7f3aa3f9d27f in st_scroll_view_dispose (object=0x55d60fa59e90) at ../src/st/st-scroll-view.c:246 + priv = 0x55d60fa59a00 + #2 0x7f3aa4aeada0 in g_object_unref (_object=0x55d60fa59e90) at ../../../gobject/gobject.c:3891 + _pp = + gaig_temp = + gaig_temp = + weak_locations = + nqueue = 0x55d60fa6da60 + _ptr = + object = 0x55d60fa59e90 + old_ref = + retry_atomic_decrement1 = + __func__ = "g_object_unref" + #3 0x7f3aa43b4b2c in GjsAutoPointer<_GObject, void, _object_unref, _object_ref>::reset (ptr=0x0, this=) at ../gjs/jsapi-util.h:229 + old_ptr = + #4 GjsAutoPointer<_GObject, void, _object_unref, _object_ref>::~GjsAutoPointer (this=, this=) at ../gjs/jsapi-util.h:172 + No locals. + #5 GjsSmartPointer<_GObject>::~GjsSmartPointer (this=, this=) at ../gjs/jsapi-util.h:349 + No locals. + #6 ObjectInstance::release_native_object (this=0x55d60fa0ce80) at /usr/src/gjs-1.76.0-1/obj-x86_64-linux-gnu/../gi/object.cpp:1524 + No locals. + #7 ObjectInstance::release_native_object (this=0x55d60fa0ce80) at /usr/src/gjs-1.76.0-1/obj-x86_64-linux-gnu/../gi/object.cpp:1500 + No locals. + #8 0x7f3aa43c9ec0 in ObjectInstance::~ObjectInstance (this=, this=) at /usr/src/gjs-1.76.0-1/obj-x86_64-linux-gnu/../gi/object.cpp:1945 + was_using_toggle_refs = false + had_toggle_up = false + had_toggle_down = + had_toggle_up = + had_toggle_down = + was_using_toggle_refs = + #9 GIWrapperInstance::finalize_impl (this=0x55d60fa0ce80) at ../gi/wrapperutils.h:1113 + No locals. + #10 ObjectInstance::finalize_impl (gcx=, obj=0x35b1abd24820, this=0x55d60fa0ce80) at /usr/src/gjs-1.76.0-1/obj-x86_64-linux-gnu/../gi/object.cpp:1912 + query = {type = 94377830362416, type_name = 0x7f3aa3fdcda6 "StScrollView", class_size = 664, instance_size = 48} + query = + _g_boolean_var_74 = + #11 GIWrapperBase::finalize (gcx=, obj=0x35b1abd24820) at ../gi/wrapperutils.h:411 + priv = 0x55d60fa0ce80 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/2016217 Title: gnome-shell crashed with SIGSEGV in clutter_actor_remove_effect() from st_scroll_view_dispose() from g_object_unref() from GjsAutoPointer() from GjsAutoPointer() Status in GNOME Shell: Unknown Status in gnome-shell package in Ubuntu: New Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding gnome-shell. This problem was most recently seen with package version 44.0-2ubuntu3, the problem page at https://errors.ubuntu.com/problem/677a794c2788cd0244c8fc6d7d34780a85127bc9 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. #0 0x7f3aa429dd82 in clutter_actor_remove_effect (self=self@entry=0x55d60fa59e90, effect=0x55d6101c48a0) at ../clutter/clutter/clutter-actor.c:14830 __inst = 0x55d6101c48a0 __t = 94377826055744 __r = _g_boolean_var_274 = __func__ = "clutter_actor_remove_effect" #1 0x7f3aa3f9d27f in st_scroll_view_dispose (object=0x55d60fa59e90) at ../src/st/st-scroll-view.c:246 priv = 0x55d60fa59a00 #2 0x7f3aa4aeada0 in g_object_unref (_object=0x55d60fa59e90) at ../../../gobject/gobject.c:3891 _pp = gaig_temp = gaig_temp = weak_locations = nqueue =
[Desktop-packages] [Bug 2016985] Re: Thunderbird tabs invisible on Ubuntu-Unity
** Summary changed: - Invisible Tabs on Ubuntu-Unity + Thunderbird tabs invisible on Ubuntu-Unity -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/2016985 Title: Thunderbird tabs invisible on Ubuntu-Unity Status in thunderbird package in Ubuntu: New Status in ubuntu-unity-meta package in Ubuntu: New Bug description: The tabs become invisible, when no focus on TBs main window. See attached screen shot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/2016985/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016985] [NEW] Invisible Tabs on Ubuntu-Unity
Public bug reported: The tabs become invisible, when no focus on TBs main window. See attached screen shot. ** Affects: thunderbird (Ubuntu) Importance: Undecided Status: New ** Affects: ubuntu-unity-meta (Ubuntu) Importance: Undecided Status: New ** Attachment added: "TB Tabs invisible.png" https://bugs.launchpad.net/bugs/2016985/+attachment/5665192/+files/TB%20Tabs%20invisible.png ** Also affects: ubuntu-unity-meta (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/2016985 Title: Invisible Tabs on Ubuntu-Unity Status in thunderbird package in Ubuntu: New Status in ubuntu-unity-meta package in Ubuntu: New Bug description: The tabs become invisible, when no focus on TBs main window. See attached screen shot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/2016985/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016933] Re: X-Plane 11 doesn't start on Wayland if offloaded to the discrete Nvidia GPU
** Description changed: On Wayland only, offloading works for `glxinfo` but cannot run 3D app like X-Plane 11: $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia glxinfo | grep "OpenGL vendor string" OpenGL vendor string: NVIDIA Corporation - $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia ./X-Plane\ 11/X-Plane-x86_64 + $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia ./X-Plane\ 11/X-Plane-x86_64 Whoah -- no matter how hard I tried, I failed to get a GLX visual. Something's seriously wonky on your machine. - - Every reboot or shutdown, the nvidia daemon doesn't terminate properly: - - Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: State 'stop-sigterm' timed out. Killing. - Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Killing process 1832 (nvidia-persiste) with signal SIGKILL. - Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Main process exited, code=killed, status=9/KILL - Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Failed with result 'timeout'. - Apr 19 01:00:31 ZB systemd[1]: Stopped NVIDIA Persistence Daemon. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: nvidia-driver-530 (not installed) ProcVersionSignature: Ubuntu 5.19.0-40.41-generic 5.19.17 Uname: Linux 5.19.0-40-generic x86_64 ApportVersion: 2.23.1-0ubuntu3.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 04:30:34 2023 InstallationDate: Installed on 2023-01-04 (104 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) SourcePackage: nvidia-graphics-drivers-530 UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xwayland in Ubuntu. https://bugs.launchpad.net/bugs/2016933 Title: X-Plane 11 doesn't start on Wayland if offloaded to the discrete Nvidia GPU Status in nvidia-graphics-drivers-530 package in Ubuntu: New Status in xwayland package in Ubuntu: New Bug description: On Wayland only, offloading works for `glxinfo` but cannot run 3D app like X-Plane 11: $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia glxinfo | grep "OpenGL vendor string" OpenGL vendor string: NVIDIA Corporation $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia ./X-Plane\ 11/X-Plane-x86_64 Whoah -- no matter how hard I tried, I failed to get a GLX visual. Something's seriously wonky on your machine. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: nvidia-driver-530 (not installed) ProcVersionSignature: Ubuntu 5.19.0-40.41-generic 5.19.17 Uname: Linux 5.19.0-40-generic x86_64 ApportVersion: 2.23.1-0ubuntu3.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 04:30:34 2023 InstallationDate: Installed on 2023-01-04 (104 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) SourcePackage: nvidia-graphics-drivers-530 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-530/+bug/2016933/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016933] Re: X-Plane 11 doesn't start on Wayland if offloaded to the discrete Nvidia GPU
If you like: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-530/+filebug -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xwayland in Ubuntu. https://bugs.launchpad.net/bugs/2016933 Title: X-Plane 11 doesn't start on Wayland if offloaded to the discrete Nvidia GPU Status in nvidia-graphics-drivers-530 package in Ubuntu: New Status in xwayland package in Ubuntu: New Bug description: On Wayland only, offloading works for `glxinfo` but cannot run 3D app like X-Plane 11: $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia glxinfo | grep "OpenGL vendor string" OpenGL vendor string: NVIDIA Corporation $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia ./X-Plane\ 11/X-Plane-x86_64 Whoah -- no matter how hard I tried, I failed to get a GLX visual. Something's seriously wonky on your machine. Every reboot or shutdown, the nvidia daemon doesn't terminate properly: Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: State 'stop-sigterm' timed out. Killing. Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Killing process 1832 (nvidia-persiste) with signal SIGKILL. Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Main process exited, code=killed, status=9/KILL Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Failed with result 'timeout'. Apr 19 01:00:31 ZB systemd[1]: Stopped NVIDIA Persistence Daemon. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: nvidia-driver-530 (not installed) ProcVersionSignature: Ubuntu 5.19.0-40.41-generic 5.19.17 Uname: Linux 5.19.0-40-generic x86_64 ApportVersion: 2.23.1-0ubuntu3.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 04:30:34 2023 InstallationDate: Installed on 2023-01-04 (104 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) SourcePackage: nvidia-graphics-drivers-530 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-530/+bug/2016933/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016933] Re: X-Plane 11 doesn't start on Wayland if offloaded to the discrete Nvidia GPU
Should create a separate bug for Nvidia daemon issue? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xwayland in Ubuntu. https://bugs.launchpad.net/bugs/2016933 Title: X-Plane 11 doesn't start on Wayland if offloaded to the discrete Nvidia GPU Status in nvidia-graphics-drivers-530 package in Ubuntu: New Status in xwayland package in Ubuntu: New Bug description: On Wayland only, offloading works for `glxinfo` but cannot run 3D app like X-Plane 11: $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia glxinfo | grep "OpenGL vendor string" OpenGL vendor string: NVIDIA Corporation $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia ./X-Plane\ 11/X-Plane-x86_64 Whoah -- no matter how hard I tried, I failed to get a GLX visual. Something's seriously wonky on your machine. Every reboot or shutdown, the nvidia daemon doesn't terminate properly: Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: State 'stop-sigterm' timed out. Killing. Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Killing process 1832 (nvidia-persiste) with signal SIGKILL. Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Main process exited, code=killed, status=9/KILL Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Failed with result 'timeout'. Apr 19 01:00:31 ZB systemd[1]: Stopped NVIDIA Persistence Daemon. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: nvidia-driver-530 (not installed) ProcVersionSignature: Ubuntu 5.19.0-40.41-generic 5.19.17 Uname: Linux 5.19.0-40-generic x86_64 ApportVersion: 2.23.1-0ubuntu3.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 04:30:34 2023 InstallationDate: Installed on 2023-01-04 (104 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) SourcePackage: nvidia-graphics-drivers-530 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-530/+bug/2016933/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1968610] Re: Chromium/Brave snap doesn't launch correctly Ubuntu 22.04 on Wayland, Nvidia
** Tags added: driver-snap -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1968610 Title: Chromium/Brave snap doesn't launch correctly Ubuntu 22.04 on Wayland, Nvidia Status in chromium-browser package in Ubuntu: Confirmed Bug description: When launching Chromium as a snap on Ubuntu 22.04, it will not open properly and will open the browser with only the titlebar and a transparent window. I am using an Nvidia Graphics card with the 510.60.02 Nvidia proprietary drivers. Description: Ubuntu Jammy Jellyfish (development branch) Release: 22.04 Chromium Version: 100.0.4896.75 2022-04-07 When running "snap run chromium" in the terminal, the following output happens. Attached screenshot of result. nyaa@nyaa-desktop:~$ snap run chromium Gtk-Message: 13:42:20.777: Failed to load module "canberra-gtk-module" Gtk-Message: 13:42:20.778: Failed to load module "canberra-gtk-module" MESA-LOADER: failed to retrieve device information MESA-LOADER: failed to open nvidia-drm: /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri/nvidia-drm_dri.so: cannot open shared object file: Permission denied (search paths /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri) failed to load driver: nvidia-drm MESA-LOADER: failed to open kms_swrast: /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri/kms_swrast_dri.so: cannot open shared object file: Permission denied (search paths /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri) failed to load driver: kms_swrast MESA-LOADER: failed to open swrast: /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: cannot open shared object file: Permission denied (search paths /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri) failed to load swrast driver [9358:9478:0411/134223.111306:ERROR:udev_watcher.cc(98)] Failed to begin udev enumeration. Edit: I have recently tested this more, and I've isolated it to Wayland and the snap version of Chromium. On X, the chromium snap runs correctly. When I run Chromium as a binary from the Chromium website, the issue doesn't occur on Wayland. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1968610/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016972] [NEW] Chromium snap does not support Intel Raptor Lake (13th gen)
Public bug reported: The Chromium snap does not support Intel Raptor Lake (13th gen). RPL support was added in Mesa version 22.2.0 and our snaps contain: • /snap/gnome-3-38-2004: Mesa version 21.2.6 • /snap/gnome-42-2204: Mesa version 22.2.5 So the way forward is to get the chromium snap to use gnome-42-2204 (right now Chromium uses 3-38-2004). ** Affects: chromium-browser (Ubuntu) Importance: Medium Assignee: Nathan Teodosio (nteodosio) Status: In Progress ** Tags: driver-snap dt-1212 kivu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/2016972 Title: Chromium snap does not support Intel Raptor Lake (13th gen) Status in chromium-browser package in Ubuntu: In Progress Bug description: The Chromium snap does not support Intel Raptor Lake (13th gen). RPL support was added in Mesa version 22.2.0 and our snaps contain: • /snap/gnome-3-38-2004: Mesa version 21.2.6 • /snap/gnome-42-2204: Mesa version 22.2.5 So the way forward is to get the chromium snap to use gnome-42-2204 (right now Chromium uses 3-38-2004). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/2016972/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1968610] Re: Chromium/Brave snap doesn't launch correctly Ubuntu 22.04 on Wayland, Nvidia
** Summary changed: - Chromium snap doesn't launch correctly Ubuntu 22.04 on Wayland, Nvidia + Chromium/Brave snap doesn't launch correctly Ubuntu 22.04 on Wayland, Nvidia -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1968610 Title: Chromium/Brave snap doesn't launch correctly Ubuntu 22.04 on Wayland, Nvidia Status in chromium-browser package in Ubuntu: Confirmed Bug description: When launching Chromium as a snap on Ubuntu 22.04, it will not open properly and will open the browser with only the titlebar and a transparent window. I am using an Nvidia Graphics card with the 510.60.02 Nvidia proprietary drivers. Description: Ubuntu Jammy Jellyfish (development branch) Release: 22.04 Chromium Version: 100.0.4896.75 2022-04-07 When running "snap run chromium" in the terminal, the following output happens. Attached screenshot of result. nyaa@nyaa-desktop:~$ snap run chromium Gtk-Message: 13:42:20.777: Failed to load module "canberra-gtk-module" Gtk-Message: 13:42:20.778: Failed to load module "canberra-gtk-module" MESA-LOADER: failed to retrieve device information MESA-LOADER: failed to open nvidia-drm: /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri/nvidia-drm_dri.so: cannot open shared object file: Permission denied (search paths /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri) failed to load driver: nvidia-drm MESA-LOADER: failed to open kms_swrast: /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri/kms_swrast_dri.so: cannot open shared object file: Permission denied (search paths /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri) failed to load driver: kms_swrast MESA-LOADER: failed to open swrast: /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: cannot open shared object file: Permission denied (search paths /snap/chromium/1957/gnome-platform/usr/lib/x86_64-linux-gnu/dri) failed to load swrast driver [9358:9478:0411/134223.111306:ERROR:udev_watcher.cc(98)] Failed to begin udev enumeration. Edit: I have recently tested this more, and I've isolated it to Wayland and the snap version of Chromium. On X, the chromium snap runs correctly. When I run Chromium as a binary from the Chromium website, the issue doesn't occur on Wayland. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1968610/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1371250] Re: LightDM fails to switch to greeter on logout if allow-user-switching=false
** Tags added: multiseat -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1371250 Title: LightDM fails to switch to greeter on logout if allow-user- switching=false Status in Light Display Manager: Triaged Status in Light Display Manager 1.10 series: Triaged Status in Light Display Manager 1.12 series: Won't Fix Status in lightdm package in Ubuntu: Triaged Status in lightdm source package in Trusty: Triaged Status in lightdm source package in Utopic: Won't Fix Bug description: In my multiseat system, if I logout on a non-seat0 seat (which has allow-user-switching=false by default), lightdm fails to start a greeter on that seat: DEBUG: Seat: Display server stopped DEBUG: Seat: Active display server stopped, starting greeter DEBUG: Seat: Stopping; failed to start a greeter DEBUG: Seat: Stopping DEBUG: Seat: Stopped I guess the problem is related to seat_switch_to_greeter() calls in session_stopped or display_server_stopped callbacks in seat.c. Switch to greeter should be always allowed on logout. NOTE: This was observed in LightDM 1.10.2 on Ubuntu 14.04, but I guess it also happens on trunk series. To manage notifications about this bug go to: https://bugs.launchpad.net/lightdm/+bug/1371250/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2013128] Re: [feature request] Upgrade libglx-mesa0
one way is to wait for the lunar backport to hit jammy, but it won't happen before june/july -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2013128 Title: [feature request] Upgrade libglx-mesa0 Status in mesa package in Ubuntu: Fix Released Status in mesa source package in Jammy: New Status in mesa source package in Kinetic: New Bug description: I have a bug that occurs in Ubuntu 22.04's most up to date libmesa related packages (=22.2.5-0ubuntu0.1~22.04.1) that was not there in =22.0.1-1ubuntu2. It has since been solved in mesa's repo and pulled into debian's repo. I do not know the proper way to request an updated version be made for Ubuntu. I've manually installed many different versions of libmesa to test on my own that it was working in an older version, is broken in this update, and was fixed again in 22.3.4 and 22.3.5. The one-line fix is implemented here in libmesa's repo: https://gitlab.freedesktop.org/mesa/mesa/-/commit/7e68cf91d74e6bd9a88c2b52417451d9afec4782/pipelines -- Feature Request: Upgrade mesa libraries to apply upstream bugfix to a bug introduced in 22.2.5-0ubuntu0.1~22.04.1. I was directed to report this bug via my question at answers.launchpad.net/ubuntu: https://answers.launchpad.net/ubuntu/+question/705988 Please let me know if you need further information. Thanks! > lsb_release -rd Description: Ubuntu 22.04.2 LTS Release: 22.04 > apt-cache policy libglx-mesa0 libglx-mesa0: Installed: 22.2.5-0ubuntu0.1~22.04.1 Candidate: 22.2.5-0ubuntu0.1~22.04.1 Version table: *** 22.2.5-0ubuntu0.1~22.04.1 500 500 http://us.archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages 100 /var/lib/dpkg/status 22.0.1-1ubuntu2 500 500 http://us.archive.ubuntu.com/ubuntu jammy/main amd64 Packages ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libglx-mesa0 22.2.5-0ubuntu0.1~22.04.1 ProcVersionSignature: Ubuntu 5.19.0-35.36~22.04.1-generic 5.19.17 Uname: Linux 5.19.0-35-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82.3 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: i3 Date: Tue Mar 28 15:30:59 2023 InstallationDate: Installed on 2022-04-28 (334 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: mesa UpgradeStatus: No upgrade log present (probably fresh install) modified.conffile..etc.default.apport: [modified] mtime.conffile..etc.default.apport: 2022-04-29T14:47:14.568862 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/2013128/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016064] Re: gnome-shell crashed with SIGSEGV in clutter_stage_get_device_coords() from clutter_stage_repick_device()
I wonder if the "re-pick" mentioned in https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2738 is related. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/2016064 Title: gnome-shell crashed with SIGSEGV in clutter_stage_get_device_coords() from clutter_stage_repick_device() Status in gnome-shell package in Ubuntu: New Bug description: . ProblemType: Crash DistroRelease: Ubuntu 23.04 Package: gnome-shell 44.0-2ubuntu3 Uname: Linux 6.2.0-20-generic x86_64 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Apr 13 16:07:29 2023 ExecutablePath: /usr/bin/gnome-shell ExecutableTimestamp: 1680272303 ProcCmdline: /usr/bin/gnome-shell ProcCwd: /home/dan ProcEnviron: LANG=en_US.UTF-8 PATH=(custom, no user) SHELL=/bin/bash XDG_RUNTIME_DIR= Signal: 11 SourcePackage: gnome-shell UserGroups: adm cdrom dip lpadmin plugdev sudo users To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2016064/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2014986] Re: gnome-shell crashed with signal 5 [The error was 'BadMatch (invalid parameter attributes)'. (Details: serial xxxx error_code 8 request_code 131 (XInputExtension) m
** Tags added: fixed-in-mutter-44.1 fixed-upstream -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/2014986 Title: gnome-shell crashed with signal 5 [The error was 'BadMatch (invalid parameter attributes)'. (Details: serial error_code 8 request_code 131 (XInputExtension) minor_code 57)] Status in gnome-shell package in Ubuntu: Invalid Status in mutter package in Ubuntu: Fix Released Bug description: https://errors.ubuntu.com/problem/53564230b4b22425c80ba6615ecceab429c477e4 ProblemType: Crash DistroRelease: Ubuntu 23.04 Package: gnome-shell 44.0-2ubuntu3 ProcVersionSignature: Ubuntu 6.2.0-18.18-generic 6.2.6 Uname: Linux 6.2.0-18-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.26.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: GNOME-Greeter:GNOME Date: Sun Apr 2 01:49:43 2023 DisplayManager: gdm3 ExecutablePath: /usr/bin/gnome-shell GsettingsChanges: InstallationDate: Installed on 2023-03-30 (2 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) ProcCmdline: /usr/bin/gnome-shell RelatedPackageVersions: mutter-common 44.0-2ubuntu2 Signal: 5 SourcePackage: gnome-shell StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libX11.so.6 ?? () from /lib/x86_64-linux-gnu/libX11.so.6 _XEventsQueued () from /lib/x86_64-linux-gnu/libX11.so.6 XPending () from /lib/x86_64-linux-gnu/libX11.so.6 g_main_context_prepare () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 Title: gnome-shell crashed with signal 5 in _XEventsQueued() UpgradeStatus: Upgraded to lunar on 2023-04-01 (0 days ago) UserGroups: N/A separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2014986/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1873398] Re: gnome-disks won't do SMART on NVME drive
Same for me on Ubuntu 22.04 and Kernel 5.19. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-disk-utility in Ubuntu. https://bugs.launchpad.net/bugs/1873398 Title: gnome-disks won't do SMART on NVME drive Status in GNOME Disks: New Status in gnome-disk-utility package in Ubuntu: Triaged Bug description: I'm running 20.04 beta amd64 Desktop from a USB stick of the live ISO. I opened Disks (gnome-disks) and it sees all my drives, but it won't show SMART stats on my NVME drive (Samsung SSD 970 EVO Plus 500GB). The SMART menu item is greyed out. It works fine on other drives. The NVME has SMART support; it works fine with smartctl -a /dev/nvme0n1 for example. (Though smartctl is not in this live ISO, I have apt-get installed it at another time and tried it; and it works fine in the Ubuntu 18.04 that is installed on this machine.) I've attached a screencast showing the failure. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: gnome-disk-utility 3.36.1-1ubuntu1 ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27 Uname: Linux 5.4.0-21-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu22 Architecture: amd64 CasperVersion: 1.442 CurrentDesktop: ubuntu:GNOME Date: Fri Apr 17 07:32:43 2020 ExecutablePath: /usr/bin/gnome-disks LiveMediaBuild: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200402) ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR= PATH=(custom, no user) LANG=C.UTF-8 SourcePackage: gnome-disk-utility UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-disk-utility/+bug/1873398/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2015543] Re: Update to the upstream 1.12.1 bugfix version
It looks like (for Jammy, at least) there is an in-archive consumer of libwpebackend-fdo-1.0-1 - cog. We need at least a minimal smoke test for SRU verification, and that should suffice. I don't have a Jammy system handy, and cog isn't in the archives post-Jammy - could someone please cook up a minimal test case using cog? ** Also affects: wpebackend-fdo (Ubuntu Jammy) Importance: Undecided Status: New ** Changed in: wpebackend-fdo (Ubuntu Jammy) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to wpebackend-fdo in Ubuntu. https://bugs.launchpad.net/bugs/2015543 Title: Update to the upstream 1.12.1 bugfix version Status in wpebackend-fdo package in Ubuntu: Fix Released Status in wpebackend-fdo source package in Jammy: Incomplete Bug description: * Impact The update fixes memory handling issues which could potential have security implication. It was requested by the MIR team on https://bugs.launchpad.net/ubuntu/+source/wpebackend- fdo/+bug/1973033/comments/11 as we need to promote the package for incoming webkitgtk security updates Fedora issues an update on similar concern https://bodhi.fedoraproject.org/updates/FEDORA-2022-f98ab9f311 * Testcase Unfortunately it's not easy to test wpebackend-fdo since the project has no tests nor demo utility. The backend is used mostly by webkitgtk but the current archive version is built without that option. It is a requirement for newer webkitgtk series though and such for incoming security update (since newer webkitgtk series are rolled out as security updates) * Regression potential The changes are small fixes for memory management issues but if those were wrong then it could lead to rendering issues or crashes in webkitgtk clients once webkitgtk is build with libwpe. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wpebackend-fdo/+bug/2015543/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1968040] Re: [i915] Blanked screen doesn't wake up after locking [drmModeAtomicCommit: Argument invalide] [drmModeAtomicCommit: Invalid argument]
** Description changed: [ Workaround ] Add to /etc/environment (in Ubuntu 22.04): - MUTTER_DEBUG_ENABLE_ATOMIC_KMS=0 + MUTTER_DEBUG_ENABLE_ATOMIC_KMS=0 or in Ubuntu 22.10 and later: - MUTTER_DEBUG_FORCE_KMS_MODE=simple + MUTTER_DEBUG_FORCE_KMS_MODE=simple and then reboot. + + [ Upstream bugs ] + + https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5098 + https://gitlab.gnome.org/GNOME/mutter/-/issues/2268 + https://gitlab.gnome.org/GNOME/mutter/-/issues/2749 [ Original report ] (initially reported as a comment on bug #1965085, and split into a separate bug report) After I lock my screen and let it blank, moving the mouse or pressing any key on the keyboard won't wake it up. The only reliable workaround I've found is to press Ctrl+Alt+F1. That's on a fully up-to-date jammy, my hardware is an Intel NUC with a single Samsung monitor connected with a standard HDMI cable. This is a regression that started happening yesterday (2022-04-05) if I can remember correctly (I do apply pending updates at least once daily). ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: gdm3 42.0-1ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-25.25-generic 5.15.30 Uname: Linux 5.15.0-25-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu80 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Wed Apr 6 15:19:30 2022 InstallationDate: Installed on 2020-09-16 (566 days ago) InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Alpha amd64 (20200910) SourcePackage: gdm3 UpgradeStatus: Upgraded to jammy on 2022-03-19 (17 days ago) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1968040 Title: [i915] Blanked screen doesn't wake up after locking [drmModeAtomicCommit: Argument invalide] [drmModeAtomicCommit: Invalid argument] Status in GNOME Shell: New Status in Mutter: New Status in linux package in Ubuntu: Confirmed Status in linux-hwe-5.19 package in Ubuntu: Confirmed Status in mutter package in Ubuntu: Confirmed Bug description: [ Workaround ] Add to /etc/environment (in Ubuntu 22.04): MUTTER_DEBUG_ENABLE_ATOMIC_KMS=0 or in Ubuntu 22.10 and later: MUTTER_DEBUG_FORCE_KMS_MODE=simple and then reboot. [ Upstream bugs ] https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5098 https://gitlab.gnome.org/GNOME/mutter/-/issues/2268 https://gitlab.gnome.org/GNOME/mutter/-/issues/2749 [ Original report ] (initially reported as a comment on bug #1965085, and split into a separate bug report) After I lock my screen and let it blank, moving the mouse or pressing any key on the keyboard won't wake it up. The only reliable workaround I've found is to press Ctrl+Alt+F1. That's on a fully up-to-date jammy, my hardware is an Intel NUC with a single Samsung monitor connected with a standard HDMI cable. This is a regression that started happening yesterday (2022-04-05) if I can remember correctly (I do apply pending updates at least once daily). ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: gdm3 42.0-1ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-25.25-generic 5.15.30 Uname: Linux 5.15.0-25-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu80 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Wed Apr 6 15:19:30 2022 InstallationDate: Installed on 2020-09-16 (566 days ago) InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Alpha amd64 (20200910) SourcePackage: gdm3 UpgradeStatus: Upgraded to jammy on 2022-03-19 (17 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1968040/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016411] Re: Man page says that mutter is a GTK2 project.
** Summary changed: - Man page says that project is a GTK2 project. + Man page says that mutter is a GTK2 project. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/2016411 Title: Man page says that mutter is a GTK2 project. Status in Mutter: New Status in mutter package in Ubuntu: Triaged Bug description: I don't know for a fact that Ubuntu isn't running mutter using GTK2, but I suspect that it's probably a documentation bug, since Ubuntu tries to use later versions of GTK in their projects. Also, GTK2 apparently hasn't been the default version of GTK used in mutter since 2010, going by this commit in their repository: https://gitlab.gnome.org/GNOME/mutter/-/commit/069092eb9dae48a0aaa208728ad58d997d444221 To manage notifications about this bug go to: https://bugs.launchpad.net/mutter/+bug/2016411/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2016933] Re: X-Plane 11 doesn't start on Wayland if offloaded to the discrete Nvidia GPU
** Changed in: nvidia-graphics-drivers-530 (Ubuntu) Status: Incomplete => New ** Also affects: xwayland (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xwayland in Ubuntu. https://bugs.launchpad.net/bugs/2016933 Title: X-Plane 11 doesn't start on Wayland if offloaded to the discrete Nvidia GPU Status in nvidia-graphics-drivers-530 package in Ubuntu: New Status in xwayland package in Ubuntu: New Bug description: On Wayland only, offloading works for `glxinfo` but cannot run 3D app like X-Plane 11: $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia glxinfo | grep "OpenGL vendor string" OpenGL vendor string: NVIDIA Corporation $ __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia ./X-Plane\ 11/X-Plane-x86_64 Whoah -- no matter how hard I tried, I failed to get a GLX visual. Something's seriously wonky on your machine. Every reboot or shutdown, the nvidia daemon doesn't terminate properly: Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: State 'stop-sigterm' timed out. Killing. Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Killing process 1832 (nvidia-persiste) with signal SIGKILL. Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Main process exited, code=killed, status=9/KILL Apr 19 01:00:31 ZB systemd[1]: nvidia-persistenced.service: Failed with result 'timeout'. Apr 19 01:00:31 ZB systemd[1]: Stopped NVIDIA Persistence Daemon. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: nvidia-driver-530 (not installed) ProcVersionSignature: Ubuntu 5.19.0-40.41-generic 5.19.17 Uname: Linux 5.19.0-40-generic x86_64 ApportVersion: 2.23.1-0ubuntu3.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Apr 19 04:30:34 2023 InstallationDate: Installed on 2023-01-04 (104 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) SourcePackage: nvidia-graphics-drivers-530 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-530/+bug/2016933/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp