Re: [Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
please can you post the debs somewhere? Le 13 déc. 2012 07:11, simon james 902...@bugs.launchpad.net a écrit : Just to report that there are new drivers on the Lexmark South Africa Support that work for 12.04 -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Expired Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Expired Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
** Changed in: cups (Ubuntu) Status: Expired = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Confirmed Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
The new lexmark driver for Ubuntu 12.04 has been published in september 2012 . Can you please test your SX05 ( 305, 405 etc...) with the 1.02 driver from lexmark ? Here is the direct link for 64 bits http://support.lexmark.com:80/lexmark/index?page=contentlocale=FRdocLocale=en_USsegType=recommendedSegmentLINUX_UNIXuserlocale=FR_FRid=DR21639 it only concerns seome printers : Lexmark Interpret S409, Lexmark Prospect Pro209, Lexmark Impact S302, Lexmark Interact S608, Lexmark Prevail Pro702, Lexmark Interpret S405, Lexmark Prospect Pro205, Lexmark Intuition S505, Lexmark Impact S305, Lexmark Interact S602, Lexmark Intuition S508, Lexmark Intuition S502, Lexmark Impact S308, Lexmark Interpret S408, Lexmark Interpret S402, Lexmark Platinum Pro902, Lexmark Prestige Pro802, Lexmark Prevail Pro706, Lexmark Prospect Pro208, Lexmark Prospect Pro202, Lexmark Platinum Pro905, Lexmark Interact S605, Lexmark Prestige Pro805, Lexmark Prevail Pro705, Lexmark Pinnacle Pro901, Lexmark Platinum Pro908, Lexmark Prestige Pro808, Lexmark Interact S606, Lexmark Prevail Pro708, Lexmark Genesis S815, Lexmark Genesis S816, Lexmark Prevail Pro709, Lexmark Impact S301 If this works for a S405 , we will close this bug and open a new one for 08Z series It does not concerns 2 printers (08Z) I still have problems on USB with : - X4650 - X2650 ** Summary changed: - Unable to print to Lexmark S405 since upgrade to 11.10 + Unable to print with Lexmark S400 series since upgrade to 11.10 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print with Lexmark S400 series since upgrade to 11.10 Status in “cups” package in Ubuntu: Confirmed Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
Just to report that there are new drivers on the Lexmark South Africa Support that work for 12.04 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Expired Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
[Expired for cups (Ubuntu) because there has been no activity for 60 days.] ** Changed in: cups (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Expired Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
@Lorenzo : Yes and several times because as I sell Ubuntu computers, I have several clients with Lexmark printers that just cannot use it. it's not always possible to downgrade ubuntu, like Intel Ivy bridge support. I tried to downgrade CUPS to 1.4.X from Natty but it would just downgrade the whole Ubuntu desktop. BTW : I successfully installed a x4650 (Same probleme as s405) on Ubuntu 12.04 over Wifi. I had to install the cups filter but it now works great. So as I understood before , the issue seems to be only related to Usb/cups. @Till : could you update the description and detail the USB stuff ? because your explanations are lost in comments. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
Just want to report a success with my Lexmark S301 - but not with USB connection unfortunatly, so it wont help everyone. I can print wirelessly with a fully updated ubuntu 12.04. I have the following setup. I have a Samsung N130 which has an ath9k driver I use hostadp to put my wireless adapter into master mode to turn my netbook into a router. I setup a dhcp3 server to allocate network addresses to clients (ie the Lexmark printer) I then installed the Lexmark driver and set it up using the wireless setup function instead of usb function. After going through the Lexmark driver install. You then go to normal ubuntu printing program, search for your network printer, add the printer and print a test page. For instructions on how I set up the hostadp and dhcp3-server see the following page: http://thenewbieblog.wordpress.com/2012/05/01/(Just ignore the internet sharing section if it dosn't apply) Regards -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
Question: Doesn't the fact that the wireless function works as per post #114. show that cups and the kernel are not the problem. The problem has to do with the usb interface libraries. What changed from ubuntu 11.04 to ubuntu 11.10 with the usb? Any thoughts? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
Ekimia: did you get this answer from Lexmark customer service? If they are not interested in fixing it, downgrading may be the only viable solution to get a working printer... may not be as trivial though, because the last versions that appeared to work were pre-1.5. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
i'm just asking : Did anyone try to downgrade cups to the Natty version ? maybe using a PPA ? Would it be a solution ? lexmark answered they won't update their filter, f... Y... -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
I will download it as soon as the final is released and report back. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
I tried a 12.10 live cd; cups keep failing, although at least this time reports an error message. As you can see in the attachment (screenshot from the printer job properties right after it failed to print), the reason seems to be that the filter crashed. ** Attachment added: Screenshot - Print job properties https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+attachment/3354161/+files/Screenshot.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
All the fixes done in CUPS 1.5.4 are also done in 1.6.1 which is the version used by Quantal (12.10). Please try a live CD of Quantal. Does printing work with such a system for you? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
Edit : Yeah it seems http://www.cups.org/articles.php?L678 (Sorry for double post ) Maybe a PPA with 1.5.4 would solve the problem , -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
Hi I didn't follow all the work on this point. Lexmark just say now that the X2670 is not compatile with 12.04. I've read that some had success with cups 1.5.4 , can 1.5.4 have something more than 1.5.3 where it still fails ? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 902535] Re: Unable to print to Lexmark S405 since upgrade to 11.10
I am also affected by this bug (I have a Lexmark X2690 and my OS is Ubuntu 12.04). Lexmark recently updated their driver, so I was hoping the issue had been corrected. However, even with the latest version (7/17/2012) the issue persists. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print to Lexmark S405 since upgrade to 11.10 Status in “cups” package in Ubuntu: Incomplete Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for auto-detection, the system is able to determine that a Lexmark S405 has been added (and adds the printer as a S300-S400-Series. However at the same time I get the following error message: Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported The printer is added and does show up in CUPS. The device URI is given as: ://Lexmark/S300-S400%20Series?serial=90T409817388744interface=1. Previously two packages were also added via the Software Centre ( lexmark-legacy-wsu (1.0-1) and lexmark-inkjet-legacy-wjre (1.0-1) but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as installed, but items in the print queue remain there without no response from the printer. A Test Page shows the printer as Processing page 1 before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says what's new in CUPS 1.4. The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my newbie-ness showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
