Re: [riot-devel] Need help about RIOT radio communicate example
Hi Chen, I can remember having the same problem with the telosb. I traced it down to the fact, that there are no interrupts triggered. Which is strange as the same code is working on an other msp430/cc2420 platform (Zolertia Z1). Maybe a misconfiguration somehow sneaked into the radio driver setup. As I don’t have a TelosB anymore I can’t debug it in more detail right now, but maybe this gives you a hint. Best, Thomas > On 16 Mar 2015, at 19:11, Oleg Hahm wrote: > > Hi Chen! > >> I connect 2 telosb to 2 USB port and used 2 terminal to "make term" to each >> telosb board. > > I guess you're using the default example, right? > >> Then I use one board to txtsnd to other board address. But there is no >> reaction from the other board. (For native mode, the other should show >> received packets). > > Do you have the possibility to use a sniffer somehow? This could be helpful to > check if it is a sender or a receiver problem. You could also try to use "make > debug" or set ENABLE_DEBUG to 1 in drivers/cc2420/cc2420_rx.c (cc2420_tx.c > respectively), to figure out what fails. The last time I checked the driver > was working, but I cannot verify right now, because I don't have any > cc2420-based hardware here. > > Thomas, Kévin, could one of you verify the problem? > >> I also use the .elf file in cooja simulation tool, there is no reaction for >> receiving node also. >> And I think the #1442 bug is not a matter about shell(explanation from 2014 >> dec version), I think it's a cc2420 driver related bug. > > Have you tried without setting the channel and PAN? > > Cheers, > Oleg > -- > The problem UDP jokes > ___ > devel mailing list > devel@riot-os.org > http://lists.riot-os.org/mailman/listinfo/devel ___ devel mailing list devel@riot-os.org http://lists.riot-os.org/mailman/listinfo/devel
Re: [riot-devel] Need help about RIOT radio communicate example
Hi Chen! > I connect 2 telosb to 2 USB port and used 2 terminal to "make term" to each > telosb board. I guess you're using the default example, right? > Then I use one board to txtsnd to other board address. But there is no > reaction from the other board. (For native mode, the other should show > received packets). Do you have the possibility to use a sniffer somehow? This could be helpful to check if it is a sender or a receiver problem. You could also try to use "make debug" or set ENABLE_DEBUG to 1 in drivers/cc2420/cc2420_rx.c (cc2420_tx.c respectively), to figure out what fails. The last time I checked the driver was working, but I cannot verify right now, because I don't have any cc2420-based hardware here. Thomas, Kévin, could one of you verify the problem? > I also use the .elf file in cooja simulation tool, there is no reaction for > receiving node also. > And I think the #1442 bug is not a matter about shell(explanation from 2014 > dec version), I think it's a cc2420 driver related bug. Have you tried without setting the channel and PAN? Cheers, Oleg -- The problem UDP jokes pgpWbJVaERiZW.pgp Description: PGP signature ___ devel mailing list devel@riot-os.org http://lists.riot-os.org/mailman/listinfo/devel
Re: [riot-devel] Need help about RIOT radio communicate example
Thank you for replying. I connect 2 telosb to 2 USB port and used 2 terminal to "make term" to each telosb board. Then I set addr to each board and the same chan & pan to them. Then I use one board to txtsnd to other board address. But there is no reaction from the other board. (For native mode, the other should show received packets). I also use the .elf file in cooja simulation tool, there is no reaction for receiving node also. And I think the #1442 bug is not a matter about shell(explanation from 2014 dec version), I think it's a cc2420 driver related bug. On Sunday, March 15, 2015, Ludwig Ortmann wrote: > Hi Chen, > > How exactly does the example not work? > Or the other way around: what does work? > > Cheers, Ludwig > > Am 12. März 2015 16:31:55 MEZ, schrieb Chen Xie >: > >Hi, > > > > I'm a USC(University of Southern California) student. and I'm new to > >RIOT and I have a project based on RIOT. > > Firstly, I want to make 2 TelosB boards(Sky Tmote) talk through radio > >(CC2420). > >I tried to use default example, but it seems do not work. I am not sure > >which part goes wrong. > > I searched several days, and no radio examples found. > >Do you have examples related to radio communication? No shell related > >is > >better. Can you help? > > > > Thanks for your attention. > > > > Best, > > Chen > > > > > > > > > >___ > >devel mailing list > >devel@riot-os.org > >http://lists.riot-os.org/mailman/listinfo/devel > > ___ > devel mailing list > devel@riot-os.org > http://lists.riot-os.org/mailman/listinfo/devel > ___ devel mailing list devel@riot-os.org http://lists.riot-os.org/mailman/listinfo/devel