Re: [slim] Nice Job on 7.4
Uggg...spoke too soon. The upgrade to 7.4 from 7.3.3 went fine. The remote worked fine for several days. Then I went to use it and had 3 items on the main menu. The light on the receiver was off. I power cycled the receiver and it flashed a few colors and then the light turned off. I tried to connect the receiver to my router and it couldn't find it. So I did a hard reset of the receiver and the remote and got it going again (I have had to do this about 100 times in the 2 years I have had this). Really. Am I the only one that seems to have problems getting the remote and receiver setup unless a PC is on? If I leave my Windows XP PC off during this procedure, I can't seem to get it working. It's like it doesn't like to be setup from scratch with only the Squeezebox server (over the net) available. ??? -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=68805 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Nice Job on 7.4
I agree. I have previously been very critical of earlier builds but 7.4 is very nice! -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=68805 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] New Controller on horizon?
Nikhil;428870 Wrote: Based on this post, it looks like Logitech are preparing more than one new product for release. It mentions a new version of the Duet, and a device with a touch screen. http://forums.sonos.com/showthread.php?t=13043highlight=squeezebox Discussed a bit here: http://forums.slimdevices.com/showthread.php?t=63727 From the first site listed above, I found this: Last year, however, Logitech launched the Squeezebox Duet to much fanfare. Unlike their other products, it was of an extremely low quality and at launch was quite simply unusable. Hundreds of owners struggled to get the device and/or it's controller connected to their wifi network - many of them existing Squeezebox owners. Logitech refused to accept responsibility and blamed issues with the owners setup and other external factors. Magically, 6 months later, a firmware update fixed the majority of issues - despite many owners having wasted money on new routers etc. to try and resolve the problem. Not what I would call quality and many long term Squeezebox owners also regard it as the black sheep of the family. Talk about walking a mile in my shoes! And I thought I was the only one...still love my Duet but man, it's been a lng road!! -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=64022 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Does anyone make a silicone case for the Duet?
I'm just looking to cover the top portion - to protect it from scratches (front and back) and sticky hands from kids... -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=63244 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
[slim] Does anyone make a silicone case for the Duet?
I would buy one. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=63244 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
[slim] SqueezeCenter 24151 and 24158 broke my SB
Both of these builds prevented my original 1st gen SqueezeBox from seeing my PC. Same for the Duet receiver. I reverted to 23902 and all is well again. Just thought someone might like to know... -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=55792 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] How to force Duet to use ethernet not wireless?
Thanks Cliveb. Oh yes, I am very familiar with the slow blinking red reset versus the fast blinking red reset. Every month or so, I will go to use my Duet and the remote can't find the receiver (usually because my music server PC is selected as the music source but it is now in standby mode). So it confuses the Duet remote. So I have to do a hard reset on the receiver and a factory reset on the remote. The frustrating thing is that I get inconsistent results when I do hard resets and factory resets. As I mentioned above, I always choose the ethernet option during setup but then it seems that I have to do this reset up to a dozen times before it sticks. Not always but sometimes it can be a bear!!! -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=54222 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] How to force Duet to use ethernet not wireless?
I am pretty sure they have a bug. Many times I have done a hard reset on the receiver (hold button in until red flashes fast) and then also did a factory reset on the remote. It starts up and I choose English and then it searches for networks and gives me the option to connect using Ethernet or wifi. I choose Ethernet and then the setup proceeds to continue as if I selected wifi. I have probably hard reset both 50 times... -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=54222 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
[slim] 7.3_23418 Can not install jive.bin
Any suggestions on how I can update the remote? Some background, I have probably updated this thing short of a billion times going back to when it was first released. 7.2 has been much more stable but it still gets confused from time to time. I have the player wired to my PC. The Duet seems to work fine but gets hosed over time when you switch back and forth between Squeezenetwork and the main music server (PC). Or if you are connected to the PC and then the next time you turn on the Duet the PC happens to be off - it gets confused. Not always, but enough to make this item high on my wife's list of hated gadgets (and I have to admit I am losing patience). I installed the Windows version of 7.3_23418 squeeze center and the install went fine. With the remote, I chose to do the software update. It reported that a new update was available but it did not know the version. The update fails with 0% never being displayed. I think fine - I will just copy the bin file on the SD card and rename as jive.bin and update that way. When I reboot the remote, it restarts as normal (never prompts me to immediately update like it used to) so I choose update from SD card under Settings/Advanced. 0% is shown but it never goes any further and quits. Any suggestions -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=53473 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
[slim] SC 7.2 volume issues
I normally listen to internet radio while the Duet receiver is using my Windows PC as the Music Source. I keep my Denon receiver volume level at about 4 and the volume on the Duet remote at about 50%. This results in a pleasant volume level. Last night, since my PC was off, I setup the Duet to use SqueezeNetwork to listen to Internet radio. When the stream started playing, it about blasted my socks off!!! I had to turn the volume knob on the Denon receiver down to about 1/4 of 1. It was ridiculous. Could the Slim team look into this? -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=52471 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Pause/Previous/Next buttons not working on controller (7.0.1 r2147) ?
I am seeing the same thing with 2160. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45490 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
This DUET makes me want to SCREAM It has been working great all week long. I have upgraded it (or been forced to upgrade it 3 or 4 times). It currently has 2269 on it. This morning, the remote was not connected to the receiver. I tried to connect and ONE HOUR LATER after about 15 factory resets on the remote and receiver - STILL NO LUCK. If I am lucky, I get to the final screen and it tells me 2287 is available, so I choose to download it. 10 seconds later, the remote spontaneously reboots. I tried it numerous times with the same results. So I grab my memory card and download 2287 off Slim's site. I turn on the remote and it gives me 3 options: download and install 2287, install from SD card, install from SD card. No matter what I do, the damn thing spontaneously reboots after 10 seconds of trying to copy the update. Now that I have pissed away 90 minutes of my Saturday working on this $428 device, does anyone have any suggestions to get me listening to my music again??? This is getting old. Does anyone test these updates??? -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Unable to update controller
I am having the same problem. Remote is at 2269. It sees 2287 but spontaneously reboots the remote 10 secs after trying to copy the update. SD card update method does the same thing... Very frustrating... -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=46509 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
I found the solution in another thread. When it prompts you to update, if you hit the back button to get back to Settings. Then goto Advanced and choose Software Update. It worked that way for me. Sheeesh. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
Try doing a reset on the receiver (hold the button in until you see rapid flashes). At the same time, do a factory reset on the remote. Then after setting it up (again), when it says it has a 2287 update, hit the back button. Hopefully this will work for you. And I hear ya! -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
No problem - I am starting to know this product better than the ones that I am Product Manager for... Cripes! (;-) -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
Hello everyone, Reporting back on my status. I performed about 3 updates on my remote (currently running 2223) since writing here last. I have also ditched running Squeezecenter on my Mac Pro and now run it on a dedicated WinXP box. Everything has been working wonderfully for the last 3 days or so. I'm not sure if this was Mac related or remote related (I have strong suspicions is was the remote firmware). But I am happy to report that everything is working as I originally had hoped it would - no need to RMA this product. As I have said before, I think the Slim team needs to focus on what happens when the PC or Mac running SqueezeCenter gets turned off. When this would happen, the remote would get confused and would not allow me to change to SqueezeNetwork to listed to Internet radio (since my MP3 library was no longer accessible). I think the Slim team is doing a wonderful job posting frequent updates. They are definitely on top of the issues. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
I am now running 2187 on the remote and fw 23 on the SBC. I think I may be on to something. I had previously been connecting the SBC to a Linksys 8 port switch (model EZXS88W ver 3.1) and then on to my Actiontec MI424-WR Rev C router. I connected the SBC directly to the Actiontec router tonight and the Remote started behaving more like I would expect. Are others here that are having connection problems connecting through switches? -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
I am now running firmware 23 and build 2178 on the remote. This has been the worst build for me yet. I have the SBC wired to my home router. I am connecting the remote to the SBC adhoc. After updating the remote this morning, I had my PC on. I reset the SBC and then factory reset the remote. The remote found the SBC and I chose a wired connection. It completed successfully and I could access the music on my PC and listen to internet radio. Life was good. I turned off the SBC with the remote and placed the remote in the cradle and went to work. I came home tonight and decided to listen to some music during dinner. I spent the entire dinner trying to connect the remote to the SBC via adhoc connection. This included about 4 factory resets and 4 trips to the SBC to reset it (8 feet away). It would find the controller fine but would error out saying it could not connect wirelessly. Note to developers - you say to hold the SBC button until it blinks red. After a few seconds it blinks red slowly and then if you keep holding for another 3 or so seconds, it starts blinking red quickly. Is there a difference between these two modes? If so, you need to clarify for users or this could be causing problems. I always hold the button until I see a fast blink. The only difference between my unsuccessful attempts at trying to connect this evening compared to this morning was that my PC was on this morning. Tonight during dinner, when I just wanted to listen to Internet radio, the PC (where the MP3's live) was off. That shouldn't matter for initial connection/setup - right??? So I went upstairs and turned on my PC. Reset remote, reset SBC. Still would not connect. Then I decided to try connecting to my wireless network. I was able to successfully connect. The only problem with this setup is I often run into delays of up to 30 seconds when I change the volume. Is adhoc mode now broken? What should I try to make it work again? Note to developers, PMs, marketing, and Slim executives. I have been working as a Product Manager in high tech companies for almost 15 years (Intel, Xircom, and a slew of telephony start-ups). I have been involved in numerous 3rd party software betas (Win95-XP) and hardware betas. I'm even in charge of running beta programs. The Squeezebox Duet is by far the most unstable product I have ever used in my entire life. It reminds me of several Alpha stage devices. It is very disappointing to see such an immature product released. In fact, it is perhaps very telling about the state of affairs at Logitech/Slim Devices. I cannot see any respectable product development team releasing such a bug-ridden product. Was there pressure by upper management to get this thing out the door before the end of the quarter to make the numbers? The Duet has sooo much going for it. It is just a shame that you had to release this thing in the state that is in. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
jason3fc;288592 Wrote: I have tried this with the receiver each time I got a blue light. This does not work and it comes back on and ends up with a blue light again. I was also having this problem. I finally read that you can hold the center button on the receiver down for 12 seconds to hard reset the receiver. Previously, I would hold it down for about 3-4 seconds before I saw the red light slowly blink. But if you keep holding it in, it will start to blink fast red. Doing this, combined with a factory reset on the remote, allowed me to connect up again. Kind of reminds me of playing Twister with my kids (;-) -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
I wish everyone would stop blaming wireless networks. While there may be some issues with some wifi network setups, the Duet has some serious bugs. I too have been having to do a factory reset daily since I bought this. I am now running 2171 and connectivity has not improved. I am connected adhoc to the receiver which is wired back to my router. Everything was working tonight. I was connected to my Mac upstairs where all of my music lives. Then my wife turned off the Mac and I lost the connection. OK, I thought, the beauty of this thing is that it doesn't require the PC to be on. So I tried to connect to SqueezeNetwork. No luck. I rebooted the remote. Tried to connect to SN - No luck. I rebooted the receiver. No luck. I repeated both of these about 3 times. No luck. I went upstairs and turned on the Mac. Finally I was able to connect. Can the Duet not connect without SqueezeCenter running? When it loses its connection with SqueezeCenter, it seems to require that the unit be setup again (connect to the receiver, choose the music source...) I would highly recommend doing a lot of testing when the receiver/remote are connected to a PC/Mac and then the computer is turned off. This seems to hose the entire device. It took me over 30 minutes to get everything up and running again. There is no way my wife or any other family member could use this device at this point. Such a shame. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeeze controller losing network connection
Excitement of receiving my Duet quickly faded two days ago after playing with it for about half an hour. This device still needs lots of stability work. The consumer side of me wants to rip Slim Devices a new one. The Product Manager side of me understands the complexity of releasing a device like this. So I will try to be constructive... I had many of the issues listed in this 7 page posting. I initially connected to my home's wifi router. It is an Actiontec MI424-WR Rev C with the latest firmware from Verizon (FIOS). I now have 7.01 with the latest remote firmware and it did not seem to help things much. After reading the posts here, I wired my Duet receiver to my router and setup an adhoc connection to the Duet with the remote. Once the remote is setup for a wifi network, there is no way to go back and tell it to connect via adhoc unless you factory reset the remote and then *also* press and hold the button on the receiver to reset it. The option to do an adhoc connection never appeared for me until I reset the receiver. Things worked well for most of the evening. I could connect to all of my songs on my Mac Pro upstairs. Then my wife turned off the Mac. I couldn't access the music so I tried to connect to Squeeze Network. No matter what I tried, I could not connect to SN. I had a blue wifi signal on the remote and receiver. Finally, I turned off the remote and reset the receiver and was able to connect to Squeeze Network. I would recommend you do lots of testing with the above scenario - where the PC or Mac in the home gets turned off - the Duet should be able to gracefully change networks. This device has a lot of promise. It's too bad I feel like I am still beta testing this $432 device. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=45031 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Squeezecenter won't start on OSX 10.5.2
I am having the same problems. I had this problem forever with Tiger and 6.5 builds. Then I updated to Leopard and 7.0 Alphas worked. Then upgraded to 10.5.2 and 7.0 quit on me. It will start and then 5-10 seconds later it stops. This is getting old! -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=43646 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Broken on Mac OS X 10.4.9
Thanks Steven, I have repaired disk permissions. Some background: This is a brand new Mac Pro. It came with 10.4.8 and I immediately updated it to 10.4.9 when I brought it home about a month ago. Everything works flawlessly except this Slimserver program. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=34474 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Broken on Mac OS X 10.4.9
Thanks for the advice. I tried both of these and it didn't help. I went into the Firewall interface but did not see anything that would tell me if port 9000 was open or not. Any other suggestions? -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=34474 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Broken on Mac OS X 10.4.9
I deleted the cache folder in \library\caches and slimserver ran for about 15 seconds this time before stopping automatically. There was a log file in the caches directory - here are the contents: InnoDB: The first specified data file ./ibdata1 did not exist: InnoDB: a new database to be created! 070421 9:04:10 InnoDB: Setting file ./ibdata1 size to 10 MB InnoDB: Database physically writes the file full: wait... 070421 9:04:10 InnoDB: Log file ./ib_logfile0 did not exist: new to be created InnoDB: Setting log file ./ib_logfile0 size to 5 MB InnoDB: Database physically writes the file full: wait... 070421 9:04:10 InnoDB: Log file ./ib_logfile1 did not exist: new to be created InnoDB: Setting log file ./ib_logfile1 size to 5 MB InnoDB: Database physically writes the file full: wait... InnoDB: Doublewrite buffer not found: creating new InnoDB: Doublewrite buffer created InnoDB: Creating foreign key constraint system tables InnoDB: Foreign key constraint system tables created 070421 9:04:10 InnoDB: Started; log sequence number 0 0 070421 9:04:10 [ERROR] Can't start server: Bind on TCP/IP port: Address already in use 070421 9:04:10 [ERROR] Do you already have another mysqld server running on port: 9092 ? 070421 9:04:10 [ERROR] Aborting 070421 9:04:10 InnoDB: Starting shutdown... 070421 9:04:12 InnoDB: Shutdown completed; log sequence number 0 43655 070421 9:04:12 [Note] /Library/PreferencePanes/SlimServer.prefPane/Contents/server/Bin/darwin/mysqld: Shutdown complete -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=34474 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Broken on Mac OS X 10.4.9
Hi Steven, Thanks again. I added these but it still stops after a few seconds. Thanks for the continued effort!!! -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=34474 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Broken on Mac OS X 10.4.9
Well, I think I am making progress...maybe. I uninstalled Slimserver as you described. Then I downloaded 6.5.2 and tried to install it for just myself. The install would fail immediately. If I chose to install it for all users, it would succeed but when I try to start Slimserver, you guessed it, it starts and then immediately stops. Arrgh! -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=34474 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Broken on Mac OS X 10.4.9
Here is my log file. I have 6.5.1 installed. When I try to run Slimserver from the preference pane, it starts for 2 seconds then stops. When I enter http://localhost:9000 into my browser address, nothing happens. Thanks for the help!!! = Friday, April 20, 2007 2:15:27 PM America/Los_Angeles = 2007-04-20 14:15:39.7587 SlimServer OSDetect init... 2007-04-20 14:15:39.7768 SlimServer OS Specific init... 2007-04-20 14:15:39.7769 SlimServer daemonizing... 2007-04-20 14:15:39. SlimServer saving pid file. 2007-04-20 14:15:39.7786 Got to the END. 2007-04-20 14:15:39.7829 SlimServer settings effective user and group if requested... 2007-04-20 14:15:39.7840 SlimServer settings init... 2007-04-20 14:15:40.0449 SlimServer strings init... 2007-04-20 14:15:40.2405 SlimServer Setup init... 2007-04-20 14:15:40.2491 SlimServer setting language... 2007-04-20 14:15:40.2492 SlimServer MySQL init... 2007-04-20 14:15:42.4360 Firmware init... 2007-04-20 14:15:42.4565 SlimServer Info init... 2007-04-20 14:15:43.1921 SlimServer IR init... 2007-04-20 14:15:43.2377 SlimServer Request init... 2007-04-20 14:15:43.2888 SlimServer Buttons init... 2007-04-20 14:15:43.2930 SlimServer Graphic Fonts init... 2007-04-20 14:15:44.0363 UDP init... 2007-04-20 14:15:44.0754 Slimproto Init... 2007-04-20 14:15:44.0842 mDNS init... 2007-04-20 14:15:44.0844 Async Networking init... 2007-04-20 14:15:44.2122 Cache init... 2007-04-20 14:15:44.2498 UPnP init... 2007-04-20 14:15:44.2779 SlimServer HTTP init... can't setup the listening port 9000 for the HTTP server: Address already in use at /Library/PreferencePanes/SlimServer.prefPane/Contents/server/Slim/Web/HTTP.pm line 172. 2007-04-20 14:15:44.3291 Got to the END. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=34474 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Can no longer use SB2, conflict with OS X.4.9?, Log contains many error messages.
I am also having problems with Slimserver running on OSX 10.4.9 I click on start server and after a couple seconds, it stops running. Is Slim Devices working on this? -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=34583 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Broken on Mac OS X 10.4.9
I bought a brand new Mac Pro a few weeks ago. It had 10.4.8 I updated this to 10.4.9 and then installed slim server 6.5.2 and when I manually start the server, it stops itself after 1-2 seconds. Slim Devices, what is an ordinary (non PERL wizard) supposed to do to get the software running? I have had my SB1 for several years and greatly miss the tunes. PLEASE HELP There is a problem with 6.5.1 and 6.5.2 working on the above configuration. -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=34474 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] SlimServer won't start in OSX after upgrade to 10.4.9
I am new to Macs so go easy on me. I installed 6.5.1 on my new Mac Pro that I just updated from 10.4.8 to 10.4.9. When I click start slimserver, it turns itself off after a few seconds. I tried downgrading to 3.05 but I don't even have that directory as shown above. Any suggestions??? Is there something else I need to install to make this work? -- davidmac27 davidmac27's Profile: http://forums.slimdevices.com/member.php?userid=7 View this thread: http://forums.slimdevices.com/showthread.php?t=33622 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss