Re: [Discuss-gnuradio] Ubuntu 9.04 and GNU Radio
I have removed the offending package from the build instructions on trac wiki This explains why Tom could get it to build and I could not get started! Thanks, Bob On Sat, Apr 25, 2009 at 7:23 PM, Tom Rondeau wrote: > On Sat, Apr 25, 2009 at 4:40 PM, Johnathan Corgan > wrote: >> On Sat, 2009-04-25 at 16:34 -0400, Robert McGwier wrote: >> snip > > And to clarify farther, we do not require PyQwt. We require the QWT > library, but not the Python version of it. When I upgraded from Ubuntu > 8.10 to 9.04 last night, I have been able to build and run GNU Radio > just fine out of the box. However, I have heard that both Bob and at > least one other person has had trouble with this. I would be > interested to hear how other people are getting along with this. > > Tom > ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Ubuntu 9.04 and GNU Radio
This is my fault. I wrote the Ubuntu instructions when we started this Qt trip and they have been copied and pasted. I ASSUMED we were going to use PyQwt. I will remove it from the gnuradio.org/trac pages. Bob On Sat, Apr 25, 2009 at 7:23 PM, Tom Rondeau wrote: > On Sat, Apr 25, 2009 at 4:40 PM, Johnathan Corgan > wrote: >> On Sat, 2009-04-25 at 16:34 -0400, Robert McGwier wrote: >> >>> I am not able to configure and compile GR on Ubuntu 9.04 using the >>> directions from the gnuradio.org/trac on any of three different >>> machines on which I attempted to do the upgrade. I then tried on one >>> of them doing a raw install (the one with the least stuff on it). The >>> same failure occurs, so updates do not appear to be broken. >>> >>> Since several of us are making a big deal of gr-qtgui right now and >>> about to roll out several things which we think will be of interest to >>> people, it was disappointing to find that pyqt-qt4-qwt5 would not >>> install, complaining about python-2.6 being too new a version. >>> >>> I think this is a temporary problem, caused by recent updates to >>> Ubuntu 9.04 repositories, but thankfully, there is an easy remedy that >>> just works. >>> >>> If you go the PyQwt home page, and download PyQwt 5.1.0 source, pay >>> attention to the requisites and make sure you have apt-get them (sip4, >>> pyqt-qt4-dev, ) , GR makes and runs with gr-qtgui enabled. >> >> Just FYI, however, if you aren't using gr-qtgui, GNU Radio compiles and >> installs just fine on Ubuntu 9.04, on two of my lab machines here, by >> just upgrading them with their currently installed packages from 8.10. >> >> Johnathan > > And to clarify farther, we do not require PyQwt. We require the QWT > library, but not the Python version of it. When I upgraded from Ubuntu > 8.10 to 9.04 last night, I have been able to build and run GNU Radio > just fine out of the box. However, I have heard that both Bob and at > least one other person has had trouble with this. I would be > interested to hear how other people are getting along with this. > > Tom > ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Ubuntu 9.04 and GNU Radio
On Sat, Apr 25, 2009 at 4:40 PM, Johnathan Corgan wrote: > On Sat, 2009-04-25 at 16:34 -0400, Robert McGwier wrote: > >> I am not able to configure and compile GR on Ubuntu 9.04 using the >> directions from the gnuradio.org/trac on any of three different >> machines on which I attempted to do the upgrade. I then tried on one >> of them doing a raw install (the one with the least stuff on it). The >> same failure occurs, so updates do not appear to be broken. >> >> Since several of us are making a big deal of gr-qtgui right now and >> about to roll out several things which we think will be of interest to >> people, it was disappointing to find that pyqt-qt4-qwt5 would not >> install, complaining about python-2.6 being too new a version. >> >> I think this is a temporary problem, caused by recent updates to >> Ubuntu 9.04 repositories, but thankfully, there is an easy remedy that >> just works. >> >> If you go the PyQwt home page, and download PyQwt 5.1.0 source, pay >> attention to the requisites and make sure you have apt-get them (sip4, >> pyqt-qt4-dev, ) , GR makes and runs with gr-qtgui enabled. > > Just FYI, however, if you aren't using gr-qtgui, GNU Radio compiles and > installs just fine on Ubuntu 9.04, on two of my lab machines here, by > just upgrading them with their currently installed packages from 8.10. > > Johnathan And to clarify farther, we do not require PyQwt. We require the QWT library, but not the Python version of it. When I upgraded from Ubuntu 8.10 to 9.04 last night, I have been able to build and run GNU Radio just fine out of the box. However, I have heard that both Bob and at least one other person has had trouble with this. I would be interested to hear how other people are getting along with this. Tom ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Ubuntu 9.04 and GNU Radio
On Sat, 2009-04-25 at 16:34 -0400, Robert McGwier wrote: > I am not able to configure and compile GR on Ubuntu 9.04 using the > directions from the gnuradio.org/trac on any of three different > machines on which I attempted to do the upgrade. I then tried on one > of them doing a raw install (the one with the least stuff on it). The > same failure occurs, so updates do not appear to be broken. > > Since several of us are making a big deal of gr-qtgui right now and > about to roll out several things which we think will be of interest to > people, it was disappointing to find that pyqt-qt4-qwt5 would not > install, complaining about python-2.6 being too new a version. > > I think this is a temporary problem, caused by recent updates to > Ubuntu 9.04 repositories, but thankfully, there is an easy remedy that > just works. > > If you go the PyQwt home page, and download PyQwt 5.1.0 source, pay > attention to the requisites and make sure you have apt-get them (sip4, > pyqt-qt4-dev, ) , GR makes and runs with gr-qtgui enabled. Just FYI, however, if you aren't using gr-qtgui, GNU Radio compiles and installs just fine on Ubuntu 9.04, on two of my lab machines here, by just upgrading them with their currently installed packages from 8.10. Johnathan ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Discuss-gnuradio] Ubuntu 9.04 and GNU Radio
I am not able to configure and compile GR on Ubuntu 9.04 using the directions from the gnuradio.org/trac on any of three different machines on which I attempted to do the upgrade. I then tried on one of them doing a raw install (the one with the least stuff on it). The same failure occurs, so updates do not appear to be broken. Since several of us are making a big deal of gr-qtgui right now and about to roll out several things which we think will be of interest to people, it was disappointing to find that pyqt-qt4-qwt5 would not install, complaining about python-2.6 being too new a version. I think this is a temporary problem, caused by recent updates to Ubuntu 9.04 repositories, but thankfully, there is an easy remedy that just works. If you go the PyQwt home page, and download PyQwt 5.1.0 source, pay attention to the requisites and make sure you have apt-get them (sip4, pyqt-qt4-dev, ) , GR makes and runs with gr-qtgui enabled. Bob ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio