John,
I use the RIGblaster Plus with an Icom 756 ProIII, DX4Win 7.01, MMTY in FSK,
and a WaveNode wattmeter (LPT port interface). I operate phone, CW, RTTY,
and PSK modes, and it works well _AFTER_ spending a lot of time messing
around with the internal jumpers. I can switch between modes instantly
without any reconfiguration or switch flipping -- accomplished only by using
2 serial and two parallel ports.
- first serial port for rig control
- second serial port for MMTTY transmit control
- first parallel LPT port for rotor control
- second parallel port for CW keying and Wavenode wattmeter interface
If you decide to go with a RIGblaster Plus, let me know -- I'd be happy to
share the document I wrote that describes the correct settings in the RB
Plus. (( I do not know if those would translate into equal success with a
straight RIGblaster))
-larry
K8UT
- Original Message -
From: John Kjos [EMAIL PROTECTED]
To: DX4WIN dx4win@mailman.qth.net
Sent: Wednesday, October 05, 2005 15:38
Subject: [Dx4win] Rigblaster
Hi again, Is anyone using a Rigblaster with DX4WIN, being able use the
RTTY window in DX4WIN? I have been thinking about getting one. Thanks-
John
EMAIL: [EMAIL PROTECTED]
WEBPAGE: http://www.w9rpm.com/
AOL IM: W9RPM
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
From [EMAIL PROTECTED] Wed Oct 5 19:48:19 2005
From: [EMAIL PROTECTED] (Jay Sewell)
Date: Wed Oct 5 19:58:42 2005
Subject: [Dx4win] Rotor Support
Message-ID: [EMAIL PROTECTED]
That's true of the older M2-2800, the new ones have different firmware.
[Original Message]
From: NJ9K [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; DX4WIN dx4win@mailman.qth.net
Date: 10/5/2005 1:28:26 PM
Subject: RE: [Dx4win] Rotor Support
I don't have any difficulty using M2-2800 and DX4WIN V7.01..
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Jay Sewell
Sent: Wednesday, October 05, 2005 17:48
To: DX4WIN
Subject: RE: [Dx4win] Rotor Support
I spoke with them on the phone and they said it will be supported in the
7.02 version whenever it comes out. He said that M2 changed the firmware
program without letting anyone know.
The change is minor. Apparently the older rotors respond to A= ###, the
newer versions of the rotor responds to A###. As a stoopgap until the
change is made I have been using HyperTerm for control.
73 Jay W5SL
[Original Message]
From: John Kjos [EMAIL PROTECTED]
To: DX4WIN dx4win@mailman.qth.net
Date: 10/5/2005 12:03:00 PM
Subject: [Dx4win] Rotor Support
Any idea when DX4WIN is going to support the M2 2800 again? Any update
in
the near future? Thanks- John
EMAIL: [EMAIL PROTECTED]
WEBPAGE: http://www.w9rpm.com/
AOL IM: W9RPM
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
