Re: [Dx4win] Filter
in case you want to find the total counties (including these you have lotw confirmation even they don't count for the award right now) you can enable lotw confirmation: file>awards>counties and check lotw under confirmation 73 Kostas SV1DPI Στις 31/3/2021 22:25, ο/η Jim Reisert AD1C έγραψε: On Wed, Mar 31, 2021 at 12:32 PM Luc EA8AM wrote: I would like to generate an ADIF file. I have created a filter with F8 to see the confirmed counties. In the county field I have put * I know that the counties award has not yet accepted confirmations via LoTW, only on paper and E-qsl, but I wanted to know if it could be done. In the Label Cnfm QSL field "Y" I generate the report and it gives me 2825 confirmed counties. I repeat the operation but putting in the QSL Cnfm field "Y" and in the LoTW Cnfm field "Y" and I get 819. Is there any possibility to generate a report by counting Cnfm in either option? Hola Luc, Does it have to be an ADIF file? If you go to File | Awards and click on the County tab. Under "Confirmation", make sure that both QSL Card and eQSL are checked. Then click OK. Now under reports, generate a County Listing. This will show just a list of counties worked and confirmed, but it won't show the actual QSOs. Now you can look through the report for the letter 'C' which means the county is confirmed. 73 - Jim AD1C __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter
On Wed, Mar 31, 2021 at 12:32 PM Luc EA8AM wrote: > I would like to generate an ADIF file. > I have created a filter with F8 to see the confirmed counties. > In the county field I have put * > I know that the counties award has not yet accepted confirmations via LoTW, > only on paper and E-qsl, but I wanted to know if it could be done. > In the Label Cnfm QSL field "Y" > I generate the report and it gives me 2825 confirmed counties. > I repeat the operation but putting in the QSL Cnfm field "Y" and in the > LoTW Cnfm field "Y" and I get 819. > Is there any possibility to generate a report by counting Cnfm in either > option? Hola Luc, Does it have to be an ADIF file? If you go to File | Awards and click on the County tab. Under "Confirmation", make sure that both QSL Card and eQSL are checked. Then click OK. Now under reports, generate a County Listing. This will show just a list of counties worked and confirmed, but it won't show the actual QSOs. Now you can look through the report for the letter 'C' which means the county is confirmed. 73 - Jim AD1C -- Jim Reisert AD1C, , https://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter
Hi. I would like to generate an ADIF file. I have created a filter with F8 to see the confirmed counties. In the county field I have put * I know that the counties award has not yet accepted confirmations via LoTW, only on paper and E-qsl, but I wanted to know if it could be done. In the Label Cnfm QSL field "Y" I generate the report and it gives me 2825 confirmed counties. I repeat the operation but putting in the QSL Cnfm field "Y" and in the LoTW Cnfm field "Y" and I get 819. Is there any possibility to generate a report by counting Cnfm in either option? Instead of counting the two options cnfm "Y". Take into account any of the 2 options with "Y" Cnfm Label "Y" or Cnfm LoTW "Y" EA8AM -- Si reenvía este correo, es OBLIGACIÓN LEGAL según la "Agencia Española de Protección de Datos de Carácter Personal" proteger la intimidad de sus contactos, para ello y para evitar SPAM (correo no deseado) hay que seguir los siguientes pasos: 1.- Borre la dirección del remitente y cualquier otra dirección que aparezca en el cuerpo del mensaje. 2.- Introduzca los destinatarios en el apartado CCO (CON COPIA OCULTA) Recuerde: Para: Déjelo en blanco. Ccc: Déjelo en blanco. Cco: Incluya aquí a sus destinatarios. Coloque esta nota en sus mensajes. GRACIAS POR COLABORAR. __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter WPX Report
Hi Mike, Thanks for the explanation. That accomplished the task. 73, Bud W3LL On Sat, Mar 20, 2021 at 1:09 PM Mike Cizek W0VTT wrote: > Hello Bud, > > > > Unfortunately, there doesn’t appear to be an easy way to filter by just > WPX cards. If you have NO other outstanding QSLs, maybe you can set the > mailed cutoff to a low number and clear them all. > > > > *Worked Cutoff* > > QSOs worked longer ago than the number of days specified will be marked > as 'not worked'. Used to ignore QSOs that are not likely to be ever > confirmed because they took place too long ago. The DX Spots Window for > example will show the colors as if this QSO did not exist. A value of zero > is used to ignore the CutOff and view all QSOs as 'worked' regardless how > long ago the QSO took place. > > > > *Mailed Cutoff* > > Similar as Worked Cutoff, but the QSL date is used instead of the QSO > date. QSOs for which a card has been sent longer ago than the number of > days specified will be treated as if a card was never sent. This can be > used in reports and summary windows and when marking additional QSOs for > QSLing. A value of zero is used to ignore the CutOff and view all QSLs > that were mailed as 'mailed' regardless how long ago the mailing took place. > > > > > > > > > > 73, > > Mike Cizek W0VTT > > > > *From:* Bud Governale > *Sent:* Saturday, 20 March, 2021 12:06 > *To:* ON4AOI > *Cc:* Mike Cizek WØVTT ; Jim Reisert AD1C < > jjreis...@alum.mit.edu>; Bud Governale ; DX4WIN Reflector < > Dx4win@mailman.qth.net> > *Subject:* Re: [Dx4win] Filter WPX Report > > > > My worked and mailed cutoff are both set to zero. > > What does the number represent? Maybe a number of days until cutoff? > > > > On Sat, Mar 20, 2021 at 12:34 PM ON4AOI wrote: > > Yes it still has in preference > Worked and Mailed Cutoff > > Guy ON4AOI - OT7K > > -----Original Message- > From: dx4win-boun...@mailman.qth.net On > Behalf Of Mike Cizek WØVTT > Sent: Saturday, March 20, 2021 4:59 PM > To: Jim Reisert AD1C > Cc: w...@arrl.net; DX4WIN Reflector > Subject: Re: [Dx4win] Filter WPX Report > > Didn’t there used to be a cut off date for QSLs? I seem to remember > seeing that, once upon a time. If you had sent a card and it wasn’t > answered for (user selectable time), that QSO would revert from “Mailed” to > either “Worked” or just to needed. Did dx4win previously have such a > feature, or am I confusing it with something else? > > > 73, > Mike Cizek WØVTT > > > On Mar 20, 2021, at 10:51 AM, Jim Reisert AD1C > wrote: > > > > > >> > >> I want to remove old mailed requests (M) from the WPX report listing. > >> How do I filter to show all the M's? > > > > Bud, I don't think you can filter by Award. I believe 'M' means that > > the QSL Date is not empty, but Cnfm is not 'Y'. You would have to > > individually double-click on each 'M' in the listing and clear the QSL > > Date for the selected QSOs. > > > > -- > > Jim Reisert AD1C, , https://www.ad1c.us > > __ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > > > This list hosted by: http://www.qsl.net Please help support this email > > list: http://www.qsl.net/donate.html > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter WPX Report
Hello Bud, Unfortunately, there doesn’t appear to be an easy way to filter by just WPX cards. If you have NO other outstanding QSLs, maybe you can set the mailed cutoff to a low number and clear them all. Worked Cutoff QSOs worked longer ago than the number of days specified will be marked as 'not worked'. Used to ignore QSOs that are not likely to be ever confirmed because they took place too long ago. The DX Spots Window for example will show the colors as if this QSO did not exist. A value of zero is used to ignore the CutOff and view all QSOs as 'worked' regardless how long ago the QSO took place. Mailed Cutoff Similar as Worked Cutoff, but the QSL date is used instead of the QSO date. QSOs for which a card has been sent longer ago than the number of days specified will be treated as if a card was never sent. This can be used in reports and summary windows and when marking additional QSOs for QSLing. A value of zero is used to ignore the CutOff and view all QSLs that were mailed as 'mailed' regardless how long ago the mailing took place. 73, Mike Cizek W0VTT From: Bud Governale Sent: Saturday, 20 March, 2021 12:06 To: ON4AOI Cc: Mike Cizek WØVTT ; Jim Reisert AD1C ; Bud Governale ; DX4WIN Reflector Subject: Re: [Dx4win] Filter WPX Report My worked and mailed cutoff are both set to zero. What does the number represent? Maybe a number of days until cutoff? On Sat, Mar 20, 2021 at 12:34 PM ON4AOI mailto:on4...@skynet.be> > wrote: Yes it still has in preference Worked and Mailed Cutoff Guy ON4AOI - OT7K -Original Message- From: dx4win-boun...@mailman.qth.net <mailto:dx4win-boun...@mailman.qth.net> mailto:dx4win-boun...@mailman.qth.net> > On Behalf Of Mike Cizek WØVTT Sent: Saturday, March 20, 2021 4:59 PM To: Jim Reisert AD1C mailto:jjreis...@alum.mit.edu> > Cc: w...@arrl.net <mailto:w...@arrl.net> ; DX4WIN Reflector mailto:Dx4win@mailman.qth.net> > Subject: Re: [Dx4win] Filter WPX Report Didn’t there used to be a cut off date for QSLs? I seem to remember seeing that, once upon a time. If you had sent a card and it wasn’t answered for (user selectable time), that QSO would revert from “Mailed” to either “Worked” or just to needed. Did dx4win previously have such a feature, or am I confusing it with something else? 73, Mike Cizek WØVTT > On Mar 20, 2021, at 10:51 AM, Jim Reisert AD1C <mailto:jjreis...@alum.mit.edu> > wrote: > > >> >> I want to remove old mailed requests (M) from the WPX report listing. >> How do I filter to show all the M's? > > Bud, I don't think you can filter by Award. I believe 'M' means that > the QSL Date is not empty, but Cnfm is not 'Y'. You would have to > individually double-click on each 'M' in the listing and clear the QSL > Date for the selected QSOs. > > -- > Jim Reisert AD1C, mailto:jjreis...@alum.mit.edu> >, > https://www.ad1c.us > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net <mailto:DX4WIN@mailman.qth.net> > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net <mailto:DX4WIN@mailman.qth.net> This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter WPX Report
My worked and mailed cutoff are both set to zero. What does the number represent? Maybe a number of days until cutoff? On Sat, Mar 20, 2021 at 12:34 PM ON4AOI wrote: > Yes it still has in preference > Worked and Mailed Cutoff > > Guy ON4AOI - OT7K > > -Original Message- > From: dx4win-boun...@mailman.qth.net On > Behalf Of Mike Cizek WØVTT > Sent: Saturday, March 20, 2021 4:59 PM > To: Jim Reisert AD1C > Cc: w...@arrl.net; DX4WIN Reflector > Subject: Re: [Dx4win] Filter WPX Report > > Didn’t there used to be a cut off date for QSLs? I seem to remember > seeing that, once upon a time. If you had sent a card and it wasn’t > answered for (user selectable time), that QSO would revert from “Mailed” to > either “Worked” or just to needed. Did dx4win previously have such a > feature, or am I confusing it with something else? > > > 73, > Mike Cizek WØVTT > > > On Mar 20, 2021, at 10:51 AM, Jim Reisert AD1C > wrote: > > > > > >> > >> I want to remove old mailed requests (M) from the WPX report listing. > >> How do I filter to show all the M's? > > > > Bud, I don't think you can filter by Award. I believe 'M' means that > > the QSL Date is not empty, but Cnfm is not 'Y'. You would have to > > individually double-click on each 'M' in the listing and clear the QSL > > Date for the selected QSOs. > > > > -- > > Jim Reisert AD1C, , https://www.ad1c.us > > __ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > > > This list hosted by: http://www.qsl.net Please help support this email > > list: http://www.qsl.net/donate.html > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter WPX Report
Yes it still has in preference Worked and Mailed Cutoff Guy ON4AOI - OT7K -Original Message- From: dx4win-boun...@mailman.qth.net On Behalf Of Mike Cizek WØVTT Sent: Saturday, March 20, 2021 4:59 PM To: Jim Reisert AD1C Cc: w...@arrl.net; DX4WIN Reflector Subject: Re: [Dx4win] Filter WPX Report Didn’t there used to be a cut off date for QSLs? I seem to remember seeing that, once upon a time. If you had sent a card and it wasn’t answered for (user selectable time), that QSO would revert from “Mailed” to either “Worked” or just to needed. Did dx4win previously have such a feature, or am I confusing it with something else? 73, Mike Cizek WØVTT > On Mar 20, 2021, at 10:51 AM, Jim Reisert AD1C wrote: > > >> >> I want to remove old mailed requests (M) from the WPX report listing. >> How do I filter to show all the M's? > > Bud, I don't think you can filter by Award. I believe 'M' means that > the QSL Date is not empty, but Cnfm is not 'Y'. You would have to > individually double-click on each 'M' in the listing and clear the QSL > Date for the selected QSOs. > > -- > Jim Reisert AD1C, , https://www.ad1c.us > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter WPX Report
Didn’t there used to be a cut off date for QSLs? I seem to remember seeing that, once upon a time. If you had sent a card and it wasn’t answered for (user selectable time), that QSO would revert from “Mailed” to either “Worked” or just to needed. Did dx4win previously have such a feature, or am I confusing it with something else? 73, Mike Cizek WØVTT > On Mar 20, 2021, at 10:51 AM, Jim Reisert AD1C wrote: > > >> >> I want to remove old mailed requests (M) from the WPX report listing. >> How do I filter to show all the M's? > > Bud, I don't think you can filter by Award. I believe 'M' means that > the QSL Date is not empty, but Cnfm is not 'Y'. You would have to > individually double-click on each 'M' in the listing and clear the QSL > Date for the selected QSOs. > > -- > Jim Reisert AD1C, , https://www.ad1c.us > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter WPX Report
> I want to remove old mailed requests (M) from the WPX report listing. > How do I filter to show all the M's? Bud, I don't think you can filter by Award. I believe 'M' means that the QSL Date is not empty, but Cnfm is not 'Y'. You would have to individually double-click on each 'M' in the listing and clear the QSL Date for the selected QSOs. -- Jim Reisert AD1C, , https://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter WPX Report
I want to remove old mailed requests (M) from the WPX report listing. How do I filter to show all the M's? Thanks es 73, Bud W3LL w...@arrl.net __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter settings V8 > V9
On Sun, Sep 20, 2020 at 10:28 PM Chris DL1MGB wrote: > unfortunately not. And no matter which log I opened in the version 8, it > always showed the export filters. So it must be stored somewhere else. Oh, you mean the import/export filters. I don't know if they are compatible. But you can try: * In the DX4WIN 8.05 SAVE directory, find dx4win.iep * In the DX4WIN 9.0x SAVE directory, the file is called impexpflt.dat Save your original impexpflt.dat file. They try copying dx4win.iep from 8.05 over top of the existing impexpflt.dat file. See if that works. If it messes everything up, then restore the original impexpflt.dat file that you copied. The files are not ASCII text so they are a little hard to read. It appears that the ADIF import/export filter is different between the two versions. If you go to File | Import/Export and click on a particular filter, you can edit and/or print it. But I do not see a way to export a filter. You may want to see if Paul can help here. -- Jim Reisert AD1C, , https://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter settings V8 > V9
Hi Jim, unfortunately not. And no matter which log I opened in the version 8, it always showed the export filters. So it must be stored somewhere else. 73s Chris DL1MGB Jim Reisert AD1C schrieb am 21.09.2020 02:51 (GMT +02:00): > On Sat, Sep 19, 2020 at 12:43 AM Chris DL1MGB wrote: > >> I am pretty new to Version 9 after several years staying with V8. Is there a >> chance to copy the filter settings I created over the years from Version 8 to >> Version 9? > > Filter settings should be stored in your logbook (.DXL file). So if > you copied your logbook file from the V8 to the V9 "SAVE" directory, > you should have them. > > -- > Jim Reisert AD1C, , https://www.ad1c.us > > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter settings V8 > V9
On Sat, Sep 19, 2020 at 12:43 AM Chris DL1MGB wrote: > I am pretty new to Version 9 after several years staying with V8. Is there a > chance to copy the filter settings I created over the years from Version 8 to > Version 9? Filter settings should be stored in your logbook (.DXL file). So if you copied your logbook file from the V8 to the V9 "SAVE" directory, you should have them. -- Jim Reisert AD1C, , https://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter settings V8 > V9
Hi, I am pretty new to Version 9 after several years staying with V8. Is there a chance to copy the filter settings I created over the years from Version 8 to Version 9? 73s Chris DL1MGB __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter by date in V. 9.04
Hello Steve, You can do this with the F8 search function. Start by selecting "File" at the very top: File > Preferences > QSO > QSO Date > Range > Save changes and exit. When you do a search (F8), enter the beginning date, hit return, and the program will ask for the end date. When you do your export (File > Import/Export) select YES for using the filter. -- 73, Mike Cizek WØVTT -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of tobestep . Sent: Monday, March 26, 2018 06:33 To: DX4WIN@mailman.qth.net Subject: [Dx4win] Filter by date in V. 9.04 Hi all: I am trying to filter some QSOs by date range so that I can export them to another app. I have tried using the 'multiple QSO' option combined with the filter by date range but am having no success. Can anyone suggest a simple method for doing this. The help file in dx4win did not provide much info. thanks and 73 Steve VE3XO __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to mgci...@gmail.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter by date in V. 9.04
Hi all: I am trying to filter some QSOs by date range so that I can export them to another app. I have tried using the 'multiple QSO' option combined with the filter by date range but am having no success. Can anyone suggest a simple method for doing this. The help file in dx4win did not provide much info. thanks and 73 Steve VE3XO __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter - Selection - greyed out
"Basic" should be "Regular" W8DN On 12/31/2016 6:28 PM, Mike Rhodes wrote: I set my privileges back to "Basic" and the 'Selection' option is still available on 8.05. So you cannot open the 'Selection' pop-up box at all? Mike / W8DN On 12/31/2016 5:11 PM, Megin Murphy wrote: I would like to use the Selection by date feature but the "Selection" option under the Filter menu is greyed out. How do I make it active? 73, Megin, K5IJ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter - Selection - greyed out
I set my privileges back to "Basic" and the 'Selection' option is still available on 8.05. So you cannot open the 'Selection' pop-up box at all? Mike / W8DN On 12/31/2016 5:11 PM, Megin Murphy wrote: I would like to use the Selection by date feature but the "Selection" option under the Filter menu is greyed out. How do I make it active? 73, Megin, K5IJ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter - Selection - greyed out
I would like to use the Selection by date feature but the "Selection" option under the Filter menu is greyed out. How do I make it active? 73, Megin, K5IJ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter Selections Gone
I was going to create a new filter and inadvertently selected a blank selection from the Import/Export Window. I exited DX4WIN and reopened it. When I now select File - Import/Export Filter, I receive a message saying an Exception has occured and Grid is out of range . Hitting the OK button reveals the Import/Export filter window but there are NO filter selections at all. Now if I select LotW - Export to LOTW, another message is raised: Could not find ADIF filter How do I restore the standard set of Import/Export filters? ( I have current backups) 73 KS1J Jim __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter Selections Not Gone
After a bit of further searching I restored DX4WIN.IEP and the filters were back. My backup version is dated Jan 26 2011 which I assume is the latest. 73 Jim - Original Message - From: Jim Bowman k...@arrl.net To: Dx4win@mailman.qth.net Sent: Saturday, June 15, 2013 12:57 PM Subject: [Dx4win] Filter Selections Gone I was going to create a new filter and inadvertently selected a blank selection from the Import/Export Window. I exited DX4WIN and reopened it. When I now select File - Import/Export Filter, I receive a message saying an Exception has occured and Grid is out of range . Hitting the OK button reveals the Import/Export filter window but there are NO filter selections at all. Now if I select LotW - Export to LOTW, another message is raised: Could not find ADIF filter How do I restore the standard set of Import/Export filters? ( I have current backups) 73 KS1J Jim __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN filter question
This is the easiest way to do what you want, George. On Wed, Jan 30, 2013 at 11:26 AM, ON4AOI on4...@skynet.be wrote: Can be done easy George Make under Filter Selection a new entry With date filter 01/01/2013 to 31/01/2013 Update save etc When the filter is selected Go into reports DXCC Listing worked And you have it You can print it or write to file (and clear the bands also) Guy ON4AOI-OT7K -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens George Verzonden: woensdag 30 januari 2013 15:08 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] DX4WIN filter question I need to filter all my QSO's from 1/1/2013 to 1/31/2013, tomorrow, and only filter for the unique countries and write to a file that others without DX4WIN can read. We have a contest in our DX club, WNYDXA, for the most countries in the month of January. I was able to filter all contacts in January but also need unique countries, no dup countries. How can this be accomplished in DX4WIN version 8.05? Thanks. George W2YJ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN filter question
Can be done easy George Make under Filter Selection a new entry With date filter 01/01/2013 to 31/01/2013 Update save etc When the filter is selected Go into reports DXCC Listing worked And you have it You can print it or write to file (and clear the bands also) Guy ON4AOI-OT7K -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens George Verzonden: woensdag 30 januari 2013 15:08 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] DX4WIN filter question I need to filter all my QSO's from 1/1/2013 to 1/31/2013, tomorrow, and only filter for the unique countries and write to a file that others without DX4WIN can read. We have a contest in our DX club, WNYDXA, for the most countries in the month of January. I was able to filter all contacts in January but also need unique countries, no dup countries. How can this be accomplished in DX4WIN version 8.05? Thanks. George W2YJ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN filter question
Hello George - Try this - FILTER - type in 2013-01-01 - ENTER. This should give you all QSOs from 1 Jan. Then EXPORT this to another log file, say YES when it asks you if you want to use the filter for the export. Do your DXCC report on this exported log file. There may be an easier way, in which case AD1C will probably anwer. 73, Mike Cizek W3MC -Original Message- From: George [mailto:goofy...@rochester.rr.com] Sent: Wednesday, 30 January, 2013 09:08 To: dx4win@mailman.qth.net Subject: [Dx4win] DX4WIN filter question I need to filter all my QSO's from 1/1/2013 to 1/31/2013, tomorrow, and only filter for the unique countries and write to a file that others without DX4WIN can read. We have a contest in our DX club, WNYDXA, for the most countries in the month of January. I was able to filter all contacts in January but also need unique countries, no dup countries. How can this be accomplished in DX4WIN version 8.05? Thanks. George W2YJ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter selection with Elecraft K3 issue
Using Elecraft K3. When double clicking a CW spot that includes a split frequency, it changes my filter width setting from 1K to 400 Hz. On a simplex spot, no change (I prefer 1 KHz). Anyone have a fix for this one? Tnx, Barry W2UP __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter settings reversed
On Wed, Nov 11, 2009 at 10:19 PM, Dave Perry N4QS n...@comcast.net wrote: My K3 has been working great with DX4WIN except for one issue. When I double click on a spot that is split, the K3 reverses the filter bandwidths between VFO A and VFO B. Normally I keep VFO A at 250 Hz and B at 400 Hz. So when I click on a spot, I want to keep the filter bandwidths the same. The RX and TX frequencies are being set properly by DX4WIN -- it is just that the filter bandwidths are being reversed. I am using the Elecraft K3 X4 radio file. Dave, did you ever resolve this? Does ANYONE else with a K3 have this same problem? 73 - Jim AD1C -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter settings reversed
Jim Reisert AD1C wrote: On Wed, Nov 11, 2009 at 10:19 PM, Dave Perry N4QS n...@comcast.net wrote: My K3 has been working great with DX4WIN except for one issue. When I double click on a spot that is split, the K3 reverses the filter bandwidths between VFO A and VFO B. Normally I keep VFO A at 250 Hz and B at 400 Hz. So when I click on a spot, I want to keep the filter bandwidths the same. The RX and TX frequencies are being set properly by DX4WIN -- it is just that the filter bandwidths are being reversed. I am using the Elecraft K3 X4 radio file. Dave, did you ever resolve this? Does ANYONE else with a K3 have this same problem? 73 - Jim AD1C Hi Jim... Mine does it too as well as putting the split freq in the freq window. I discovered that the rig file without the X4 works OK. 73, Roger -- Remember the USS Liberty (AGTR-5) http://ussliberty.org/ __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter settings reversed
Roger N1RJ wrote: Mine does it too as well as putting the split freq in the freq window. I discovered that the rig file without the X4 works OK. Then added: I just discovered that the K# file without X4 seems to set freqs and bandwidth OK but doesn't set the split to on. Here are the differences between the two .RIG files (use a fixed-width font). Maybe someone can figure out how to get the best of both worlds: MODEL=Elecraft K3| MODEL=Elecraft K3 X4 DATE=39734 | DATE=39735 [RC-Clear Clarifier] CSTR=RC; CDELAY=0 LEN=0 LOC=Other CSTR=FR0;FT0;| CSTR=FT1; [RC-Select VFO B] CSTR=K31;SWH58;SWT13;SWT13;K30; CDELAY=520 LEN=0 LOC=VFO AB CSTR=MD0;| CSTR=MD0;FT0;FR0; CSTR=FR0;| CSTR=; [RC-Set Split on] CSTR=FT1; CDELAY=0 LEN=0 LOC=VFO AB CDELAY=0 | CDELAY=520 CDELAY=0 | CDELAY=520 [RF-Write Mode AB] CMD=No Command FMT=BCD POS=0 LM=0 -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter settings reversed
Jim, Yes, I got it fixed thanks to Tom, W4KX. Here is what he sent me: The problem is with the rig file (X4), which includes an errant command to NORM the vfo whenever VFO B is selected (you can see this yourself when you double click on a spot and the display will briefly show NORM). The current commands sent to the rig under a Select VFO B is invoked are K31;SWH58;SWT13;SWT13;K30; It's the SWH58 command that norms the radio. So, just change the rig file for Select VFO B to: K31;SWT13;SWT13;K30; and you will be all set! All I did modify the X4 righ file by deleting the one command SWH58 as he suggested. Works fine now. Some people may want to norm their filters when they go into split. Not me. I like keeping my filter settings for both RXs the same. Dave, N4QS - Original Message - From: Jim Reisert AD1C jjreis...@alum.mit.edu To: Dave Perry N4QS n...@comcast.net Cc: DX4WIN Reflector dx4win@mailman.qth.net Sent: Friday, November 20, 2009 12:27 PM Subject: Re: [Dx4win] Filter settings reversed On Wed, Nov 11, 2009 at 10:19 PM, Dave Perry N4QS n...@comcast.net wrote: My K3 has been working great with DX4WIN except for one issue. When I double click on a spot that is split, the K3 reverses the filter bandwidths between VFO A and VFO B. Normally I keep VFO A at 250 Hz and B at 400 Hz. So when I click on a spot, I want to keep the filter bandwidths the same. The RX and TX frequencies are being set properly by DX4WIN -- it is just that the filter bandwidths are being reversed. I am using the Elecraft K3 X4 radio file. Dave, did you ever resolve this? Does ANYONE else with a K3 have this same problem? 73 - Jim AD1C -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter settings reversed
Close but not quite there: I just tried the modification to the X4 file and it is indeed better, but not quite correct. The WIDTH stays for both A and B, but the SHIFT is normalized in A. The SHIFT in B stays as it was prior to selecting the split spot. Bruce - N1LN -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dave Perry N4QS Sent: Friday, November 20, 2009 18:20 To: Jim Reisert AD1C Cc: DX4WIN Reflector Subject: Re: [Dx4win] Filter settings reversed Jim, Yes, I got it fixed thanks to Tom, W4KX. Here is what he sent me: The problem is with the rig file (X4), which includes an errant command to NORM the vfo whenever VFO B is selected (you can see this yourself when you double click on a spot and the display will briefly show NORM). The current commands sent to the rig under a Select VFO B is invoked are K31;SWH58;SWT13;SWT13;K30; It's the SWH58 command that norms the radio. So, just change the rig file for Select VFO B to: K31;SWT13;SWT13;K30; and you will be all set! All I did modify the X4 righ file by deleting the one command SWH58 as he suggested. Works fine now. Some people may want to norm their filters when they go into split. Not me. I like keeping my filter settings for both RXs the same. Dave, N4QS - Original Message - From: Jim Reisert AD1C jjreis...@alum.mit.edu To: Dave Perry N4QS n...@comcast.net Cc: DX4WIN Reflector dx4win@mailman.qth.net Sent: Friday, November 20, 2009 12:27 PM Subject: Re: [Dx4win] Filter settings reversed On Wed, Nov 11, 2009 at 10:19 PM, Dave Perry N4QS n...@comcast.net wrote: My K3 has been working great with DX4WIN except for one issue. When I double click on a spot that is split, the K3 reverses the filter bandwidths between VFO A and VFO B. Normally I keep VFO A at 250 Hz and B at 400 Hz. So when I click on a spot, I want to keep the filter bandwidths the same. The RX and TX frequencies are being set properly by DX4WIN -- it is just that the filter bandwidths are being reversed. I am using the Elecraft K3 X4 radio file. Dave, did you ever resolve this? Does ANYONE else with a K3 have this same problem? 73 - Jim AD1C -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter settings reversed
My K3 has been working great with DX4WIN except for one issue. When I double click on a spot that is split, the K3 reverses the filter bandwidths between VFO A and VFO B. Normally I keep VFO A at 250 Hz and B at 400 Hz. So when I click on a spot, I want to keep the filter bandwidths the same. The RX and TX frequencies are being set properly by DX4WIN -- it is just that the filter bandwidths are being reversed. I am using the Elecraft K3 X4 radio file. Any help would be appreciate. Thanks. Dave Perry, N4QS __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter Selection
I'm sure this is operator error, but I can't work my way through this. This is what I want to do: Select QSO's from my log (ALL QSO's - Group 0) based on a range of dates (17 Jan 07 to the current date). I want to change the LoTW and eQSL flags to Y for all these QSO's. When I go to FILTER | SELECTION, I can't do anything with the window that appears. The only active thing I can do is get a drop down under the ALL QSO's line at the top allowing me to Replace this name. What I want to do is enable the date filter by typing in the First Date and Last Date. However, this and everything else in the window (except the very top line) seems inactive and I can't change or enter anything. Maybe I'm going about this wrong. How do I set the above flags? Thanks in advance for any help. 73 - Ralph - K0IR __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter Selection
On Mon, Nov 9, 2009 at 11:47 AM, Ralph Fedor radiok...@gmail.com wrote: Select QSO's from my log (ALL QSO's - Group 0) based on a range of dates (17 Jan 07 to the current date). I want to change the LoTW and eQSL flags to Y for all these QSO's. When I go to FILTER | SELECTION, I can't do anything with the window that appears. The only active thing I can do is get a drop down under the ALL QSO's line at the top allowing me to Replace this name. What I want to do is enable the date filter by typing in the First Date and Last Date. However, this and everything else in the window (except the very top line) seems inactive and I can't change or enter anything. Hi Ralph, If it's a simple date range, change your QSO preferences tab to use Range for date. Then use the F8 key and set the starting date. Hit ENTER and it will prompt you for the ending date. Now perform the flag operations, and DX4WIN will ask if you want to use the filter. Answer YES of course. 73 - Jim AD1C -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter (F8) problem...
Hi Paul and Jim, Today I discovered an other strange bahaviour: 1 - Added qso made with OH9AA/P - 14mhz - ssb - IOTA EU126. 2 - Exit by the program. 3 - In the afternoon I made a filter (F8) searching all EU126 qsos. 4 - DX4W shows only two other old qsos with EU126. Nothing about the qso with OH9AA/P ( ??? ) 5 - Then I have deleted the qso and I added it a second time. 6 - F8 with same result (nothing about the last qso) Very Strange. Ciao Stefano, I0MWI -- Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f Sponsor: Ricevi e invia messaggi di posta, instant messaging e rimani in contatto ovunque ti trovi direttamente dal cellulare, con m.email. Provalo gratuitamente Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=8920d=19-8 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter (F8) problem...
What's in the FREQ field for the OH9AA QSO? Isn't this just another version of the same searching problem with European separators in the frequency field? 73 - Jim AD1C On Wed, Aug 19, 2009 at 10:50 AM, Stefano Ciprianii0...@email.it wrote: Hi Paul and Jim, Today I discovered an other strange bahaviour: 1 - Added qso made with OH9AA/P - 14mhz - ssb - IOTA EU126. 2 - Exit by the program. 3 - In the afternoon I made a filter (F8) searching all EU126 qsos. 4 - DX4W shows only two other old qsos with EU126. Nothing about the qso with OH9AA/P ( ??? ) 5 - Then I have deleted the qso and I added it a second time. 6 - F8 with same result (nothing about the last qso) Very Strange. Ciao Stefano, I0MWI -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter Bug
I've merged a ver.7 log in a brand new version 8 log. I've added some QSO today. I want to export these QSOs made today but the filter tell me always: No records found. Strange thing! 73s de Leo, IZ5FSA __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter Bug
Works fine here. Did you use the correct date? IZ5FSA wrote: I've merged a ver.7 log in a brand new version 8 log. I've added some QSO today. I want to export these QSOs made today but the filter tell me always: No records found. Strange thing! 73s de Leo, IZ5FSA __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter Bug
I think so... I use the european format: dd/mm/ Mel ha scritto: Works fine here. Did you use the correct date? IZ5FSA wrote: I've merged a ver.7 log in a brand new version 8 log. I've added some QSO today. I want to export these QSOs made today but the filter tell me always: No records found. Strange thing! 73s de Leo, IZ5FSA __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter Question
Hello -- I'm running DX4WIN 7.04.04. When filtering, say you have a station that you've worked on 40M several times. I want to print a QSL label only for one of those QSOs.However, when filtering using the station's call and a single date, ALL of the QSO's show up, not just the one I wanted. How to I filter on just a single date? Thanks Mark K3MSB __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter Question
Hi Mark When creating the filter start and end date should be same for your case Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mark K3MSB Verzonden: maandag 25 mei 2009 16:34 Aan: List DX4WIN Onderwerp: [Dx4win] Filter Question Hello -- I'm running DX4WIN 7.04.04. When filtering, say you have a station that you've worked on 40M several times. I want to print a QSL label only for one of those QSOs. However, when filtering using the station's call and a single date, ALL of the QSO's show up, not just the one I wanted. How to I filter on just a single date? Thanks Mark K3MSB __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter Question
Hi Mark, In your QSO Preferences, under Searching, set QSO Date to Range. Then in the F8 search, you can set start and end dates for the QSOs. Search for the Start date, then after hitting ENTER, DX4WIN will prompt you for the End date. 73 - Jim AD1C On 5/25/2009 8:34 AM, Mark K3MSB wrote: Hello -- I'm running DX4WIN 7.04.04. When filtering, say you have a station that you've worked on 40M several times. I want to print a QSL label only for one of those QSOs.However, when filtering using the station's call and a single date, ALL of the QSO's show up, not just the one I wanted. How to I filter on just a single date? Thanks Mark K3MSB -- Jim Reisert AD1C/Ø, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter Question
Jim allready gave the answer Mark Van: Mark K3MSB [mailto:mark.k3...@gmail.com] Verzonden: maandag 25 mei 2009 17:32 Aan: ON4AOI Onderwerp: Re: [Dx4win] Filter Question Guy -- I can only specify Date, not start and end dates. Am I misunderstanding you? Mark On Mon, May 25, 2009 at 10:49 AM, ON4AOI on4...@skynet.be wrote: Hi Mark When creating the filter start and end date should be same for your case Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mark K3MSB Verzonden: maandag 25 mei 2009 16:34 Aan: List DX4WIN Onderwerp: [Dx4win] Filter Question Hello -- I'm running DX4WIN 7.04.04. When filtering, say you have a station that you've worked on 40M several times. I want to print a QSL label only for one of those QSOs. However, when filtering using the station's call and a single date, ALL of the QSO's show up, not just the one I wanted. How to I filter on just a single date? Thanks Mark K3MSB __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter Question
In preferences, on the QSO tab, you have 3 choices for date matching. Greater or Equal... handy for QSL operations. Exact... which is what you actually need. Date Range... this is what is causing you a little confusion. If you specify Date-Range... you just specify a start date in the log form and a pop-up window will ask for the range when you start the filter. The reason the guys are suggesting to set preference to Date-Range is that you can use this for all 3 types of queries... so you never have to mess with preferences. For example... for an exact match, begin - end dates are the same. For = specify a future second date... for = specify a past first date... Hope this clears it up for you Mark. ON4AOI wrote: Jim allready gave the answer Mark Van: Mark K3MSB [mailto:mark.k3...@gmail.com] Verzonden: maandag 25 mei 2009 17:32 Aan: ON4AOI Onderwerp: Re: [Dx4win] Filter Question Guy -- I can only specify Date, not start and end dates. Am I misunderstanding you? Mark On Mon, May 25, 2009 at 10:49 AM, ON4AOI on4...@skynet.be wrote: Hi Mark When creating the filter start and end date should be same for your case Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mark K3MSB Verzonden: maandag 25 mei 2009 16:34 Aan: List DX4WIN Onderwerp: [Dx4win] Filter Question Hello -- I'm running DX4WIN 7.04.04. When filtering, say you have a station that you've worked on 40M several times. I want to print a QSL label only for one of those QSOs. However, when filtering using the station's call and a single date, ALL of the QSO's show up, not just the one I wanted. How to I filter on just a single date? Thanks Mark K3MSB __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Filter Question
Got it; thanks guys -- numerous ways to do it!! 73 Mark K3MSB On Mon, May 25, 2009 at 2:07 PM, Mel ve...@videotron.ca wrote: In preferences, on the QSO tab, you have 3 choices for date matching. Greater or Equal... handy for QSL operations. Exact... which is what you actually need. Date Range... this is what is causing you a little confusion. If you specify Date-Range... you just specify a start date in the log form and a pop-up window will ask for the range when you start the filter. The reason the guys are suggesting to set preference to Date-Range is that you can use this for all 3 types of queries... so you never have to mess with preferences. For example... for an exact match, begin - end dates are the same. For = specify a future second date... for = specify a past first date... Hope this clears it up for you Mark. ON4AOI wrote: Jim allready gave the answer Mark Van: Mark K3MSB [mailto:mark.k3...@gmail.com] Verzonden: maandag 25 mei 2009 17:32 Aan: ON4AOI Onderwerp: Re: [Dx4win] Filter Question Guy -- I can only specify Date, not start and end dates. Am I misunderstanding you? Mark On Mon, May 25, 2009 at 10:49 AM, ON4AOI on4...@skynet.be wrote: Hi Mark When creating the filter start and end date should be same for your case Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mark K3MSB Verzonden: maandag 25 mei 2009 16:34 Aan: List DX4WIN Onderwerp: [Dx4win] Filter Question Hello -- I'm running DX4WIN 7.04.04. When filtering, say you have a station that you've worked on 40M several times. I want to print a QSL label only for one of those QSOs. However, when filtering using the station's call and a single date, ALL of the QSO's show up, not just the one I wanted. How to I filter on just a single date? Thanks Mark K3MSB __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Filter Selection
V. 705.04. I have 9 group names entered in filter selection. Problem is when I bring it up I cannot move the slider button. Only 5 show in the window and that is it. The side slider will not move. The OS is Vista. Must be a bug. KI0F___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] Filter Selection
2008/12/1 Roger Wise [EMAIL PROTECTED]: V. 705.04. I have 9 group names entered in filter selection. Problem is when I bring it up I cannot move the slider button. Only 5 show in the window and that is it. The side slider will not move. The OS is Vista. Must be a bug. KI0F Works OK here in WinXP. If you can tab into that field, up/down arrows may show you all the selection names. - Jim -- Jim Reisert AD1C/Ø, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] Filter on QSO date (bug ?)
John, I misread the post and saw QSO date while Alain asked about QSL date; I stand corrected. Will see what I can do for the next release. --Paul, KK4HD John Balsillie wrote: Hi Paul, We seem to be talking about two different issues. To cut the long story short. How do we search a single QSL date (not the QSO date)? Your suggestions only works for a QSO search. Cheers John ZL1ALZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Paul van der Eijk Sent: Friday, 14 November 2008 3:26 a.m. To: Alain, F 5 L I W Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Filter on QSO date (bug ?) Alain, See File | Preferences | QSO | QSO Date for your options. --Paul, KK4HD Alain, F 5 L I W wrote: Hi, When you filter (F8) QSO on QSL Date you filter the QSO with QSL Date is equal or greater but not equal QSL Date. In next version it would be nice if we can filter, at least, on equal QSL Date (but if we can filter on equal QSL Date and equal or greater QSL Date it's better). 73 Alain, F5LIW REF 41548 - 10-X # 50408 Grid : JN27oe ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.175 / Virus Database: 270.9.2/1785 - Release Date: 11/13/2008 9:12 AM ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] Filter on QSO date (bug ?)
Alain, See File | Preferences | QSO | QSO Date for your options. --Paul, KK4HD Alain, F 5 L I W wrote: Hi, When you filter (F8) QSO on QSL Date you filter the QSO with QSL Date is equal or greater but not equal QSL Date. In next version it would be nice if we can filter, at least, on equal QSL Date (but if we can filter on equal QSL Date and equal or greater QSL Date it's better). 73 Alain, F5LIW REF 41548 - 10-X # 50408 Grid : JN27oe ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Filter on QSO date (bug ?)
Hi Paul, We seem to be talking about two different issues. To cut the long story short. How do we search a single QSL date (not the QSO date)? Your suggestions only works for a QSO search. Cheers John ZL1ALZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Paul van der Eijk Sent: Friday, 14 November 2008 3:26 a.m. To: Alain, F 5 L I W Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Filter on QSO date (bug ?) Alain, See File | Preferences | QSO | QSO Date for your options. --Paul, KK4HD Alain, F 5 L I W wrote: Hi, When you filter (F8) QSO on QSL Date you filter the QSO with QSL Date is equal or greater but not equal QSL Date. In next version it would be nice if we can filter, at least, on equal QSL Date (but if we can filter on equal QSL Date and equal or greater QSL Date it's better). 73 Alain, F5LIW REF 41548 - 10-X # 50408 Grid : JN27oe ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Filter Selection LOTW
John, any F8 filter will apply for LoTW export. Just select the prefix !W (exclamation point before the W) in your log (i.e. *not* W [USA]). This will give you DX QSOs only. Then do the upload flag thingie and you should be all set. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] Filter
Interesting reply. Does this special date work for all date fields - ie QSL date ?? To turn the problem on it's head - can you search for QSl entries with a date (with a view to clearing them); where no QSL has been received? I seem to have a lot of records with a date, as if I have sent QSL's, but not received one back. I would like to clear these fields 73 Dave G3NKC -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dick Flanagan Sent: 18 December 2005 20:21 To: Richard Zalewski Cc: REFLECTOR dx4win Subject: Re: [Dx4win] Filter At 11:38 AM 12/18/2005, Richard Zalewski wrote: I want to set a filter so I can list or export all QSOs that have not been uploaded as indicated by the N in the upload field. Darned if I can figure it out. Is there a simple way? Search on Upload=N and UploadDate=01/01/1901 01/01/1901 is a special date indicating an empty date field. 73, Dick -- Dick Flanagan K7VC NV SM E-mail: [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Filter
I want to set a filter so I can list or export all QSOs that have not been uploaded as indicated by the N in the upload field. Darned if I can figure it out. Is there a simple way? -- Tnx es 73 Dick W7ZR www.w7zr.com From [EMAIL PROTECTED] Sun Dec 18 15:21:20 2005 From: [EMAIL PROTECTED] (Dick Flanagan) Date: Sun Dec 18 15:26:00 2005 Subject: [Dx4win] Filter In-Reply-To: [EMAIL PROTECTED] m Message-ID: [EMAIL PROTECTED] At 11:38 AM 12/18/2005, Richard Zalewski wrote: I want to set a filter so I can list or export all QSOs that have not been uploaded as indicated by the N in the upload field. Darned if I can figure it out. Is there a simple way? Search on Upload=N and UploadDate=01/01/1901 01/01/1901 is a special date indicating an empty date field. 73, Dick -- Dick Flanagan K7VC NV SM E-mail: [EMAIL PROTECTED]
[Dx4win] Filter commands on dx cluster?
At 05:39 PM 10/31/2005, Bill Clark wrote: Just recently when I try to enter the following command on the dx cluster every band and mode is rejected, not just the ones I specify set/filter dxbm/reject vhf,uhf,mw When I enter that, every band and mode is listed as rejected. Anyone else encountered the problem?? Doing it in Dx4win ver 7.01 and 5.03 so think it's a cluster problem. Have tried connecting to different clusters with same result?? It's a cluster problem, not a DX4WIN problem. Maybe get in touch with a sysop on one of the clusters to see what happened. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] Filter commands on dx cluster?
Just recently when I try to enter the following command on the dx cluster every band and mode is rejected, not just the ones I specify set/filter dxbm/reject vhf,uhf,mw When I enter that, every band and mode is listed as rejected. Anyone else encountered the problem?? Doing it in Dx4win ver 7.01 and 5.03 so think it's a cluster problem. Have tried connecting to different clusters with sane result?? Thanks, Bill W5VW ___ No banners. No pop-ups. No kidding. Make My Way your home on the Web - http://dell.myway.com
[Dx4win] Filter Upload QSOs
Hello All, I'd like to suggest implementing a filter in the section FILTER | SELECTION | ENABLE FILTERS. This filter might be called LOTW or UPLOAD CONF filtering all received credits from the LOTW (UPL CNF = Y) allowing statistics, e. g. DXCC, WAS and so on, considering only the QSOs confirmed by the LOTW programm. 73 DX de PY2YP - Cesar www.py2yp.ws
[Dx4win] Filter Choice from Spot
Hi, Is there a way to change my 'filter choice' when choosing a Spot on the cluster? It always goes to the medium filter and I would like the wide...IC-756PRO In 'set up parameters' in the notes for radio it says always selests narrow filter for CW/SSBNo choice Thanks and 73, Art W6KY From [EMAIL PROTECTED] Mon Aug 9 05:23:25 2004 From: [EMAIL PROTECTED] (Anders Larsson) Date: Mon Aug 9 05:26:58 2004 Subject: [Dx4win] is anyone else having Band switching Data problems withversion 6.03 References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Hi Steve, I have the same problem when connected to a cluster. Momentarily when a spot is received the band data output switches to the spot band and then back to current. Pressing F9 causes a band change to the default band set under preferences and then back to current. I have reported this 6 weeks ago directly to [EMAIL PROTECTED] Steve has asked Paul to look into it. 73 Andy SM6CNN 7S6N - Original Message - From: KG5VK Steve [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: 07 August, 2004 15:50 Subject: [Dx4win] is anyone else having Band switching Data problems withversion 6.03 I am using a Top Ten devices band decoder The model is Yaesu (which gets the band change data from the computer NOT the radio) My band decoder will ocassionly change antennas while I am on one band it may change to another band several times It is a random problem Steve 73 kg5vk ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Filter selection in DX4Win
Hello All, Several months ago I ask a question about the filters for the IC-756Pro radios and DX4Win. Thanks to the help of a friend the question of filter selection through DX4Win to the IC-756ProII has been answered. In the DX4Win/radio/IC-756ProII file find the following: [RC-Set Mode] CSTR=060002FD LEN=0 LOC=Other The (2) is the filter selection. Change the number as follows: Wide =1 Middle =2 and Narrow = 3. Unfortunately this changes the filter setting for all modes. Maybe in the next release Paul can figure a way to set the filters for each mode separately or maybe a way to change the filter from the program. Ron, N4GFO
[Dx4win] Filter spots per origin
Hi Paul, I've got retired and have more time for QSO's. I found out that many local clusters announce spots received from anywhere. US hams are surely not interested seeing their spot window filed-up with 160-meter and 80-meter spots announced by European stations. And I can't make any use of the VK9 spot announced by a JA station... So, if you're still motivated to keep DX4WIN the Number One ( and I am sure you are! ), it would be fine to add a possibility to Preferences to filter-out the spots announced from some major high-activity countries. I know that sometimes I could hear a rare DX announced by a W-Ham, but then other EU ops could hear it too and some of them would also announce it... What do you think about my proposal? Best 73, Radi, F6GNZ
[Dx4win] Filter spots per origin
Pete, Thanks a lot. This is what happens when someone wants to try the software before reading the user manual, finds it works, uses it and doesn't look further into details! Paul, please apologise my stupidity: I should have supposed you've already done it :) ! 73, Radi, F6GNZ -Original Message- From: Pete Smith [mailto:[EMAIL PROTECTED] Sent: Saturday, November 01, 2003 11:00 AM To: [EMAIL PROTECTED] Subject:Re: [Dx4win] Filter spots per origin At 08:48 AM 11/1/03 +0100, Radivoj KAR wrote: Hi Paul, I've got retired and have more time for QSO's. I found out that many local clusters announce spots received from anywhere. US hams are surely not interested seeing their spot window filed-up with 160-meter and 80-meter spots announced by European stations. And I can't make any use of the VK9 spot announced by a JA station... So, if you're still motivated to keep DX4WIN the Number One ( and I am sure you are! ), it would be fine to add a possibility to Preferences to filter-out the spots announced from some major high-activity countries. I know that sometimes I could hear a rare DX announced by a W-Ham, but then other EU ops could hear it too and some of them would also announce it... What do you think about my proposal? Best 73, It's already there, Radi, on the Packet 1 screen in Preferences. You can select spotters by prefix or zone. 73, Pete N4ZR The World HF Contest Station Database was updated October 29. 2469 stations are listed -- 29 new and over 100 updated. Are you current? www.pvrc.org/wcsd/wcsdsearch.htm
[Dx4win] filter problem V 5.03
Tom, After you see the message that 'The QSO does not match the current filter' , click the OK button followed by an Escape. This cancels the current filter and lets you select any QSO shown. If a 'Selection' is active, this does not work, because only QSOs that are in the current selection will be shown. When DX4WIN starts, the selection is 'ALL QSOs', so I don't think that is the problem. Paul At 03:16 AM 9/3/03 +, Tom Johnson wrote: To elaborate on my earlier post, if I have multiple qsos with thge same station, and try to read from one bamd qso to another, double clicking gets me a pop up screen that THE QSO DOES NOT MATCH THE CURRENT FILTER. I have gone into the filter options screen and tried to change the filter there to DX4WIN V4 OR HIGHER without any success. It will not allow me to make other changes, and to be honest, I am not sure that it has accepted tha one either. Is there any other place that will allow a filter to be changed or any idea of how to clear this problem? I need to be be able to page through the QSOs from time to time to log in cards etc, and this can be a real pain in the lobotomus.. Also, I usually save the SAVE file in another location. If I save the log files, does that mean I saved the problem with it? Would deleting the file after saving my last few QSOS and then reloading using my old SAVE file solve the problem or merely move it around some? Does anyone have any ideas? TIA Tom N4TJ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
[Dx4win] filter problem V 5.03
To elaborate on my earlier post, if I have multiple qsos with thge same station, and try to read from one bamd qso to another, double clicking gets me a pop up screen that THE QSO DOES NOT MATCH THE CURRENT FILTER. I have gone into the filter options screen and tried to change the filter there to DX4WIN V4 OR HIGHER without any success. It will not allow me to make other changes, and to be honest, I am not sure that it has accepted tha one either. Is there any other place that will allow a filter to be changed or any idea of how to clear this problem? I need to be be able to page through the QSOs from time to time to log in cards etc, and this can be a real pain in the lobotomus.. Also, I usually save the SAVE file in another location. If I save the log files, does that mean I saved the problem with it? Would deleting the file after saving my last few QSOS and then reloading using my old SAVE file solve the problem or merely move it around some? Does anyone have any ideas? TIA Tom N4TJ
[Dx4win] Filter problem
I am running 5.03 and today, when I look for a particular QSO in the same call window. I get a popup saying that THE QSO DOES NOT MATCH CURRENT FILTER. Prior to today, it would take me to the other QSO with no trouble. I have gone into the filter select option and checked the DX4Win V 4 or later option with no results. Does anyone have any idea of how I can correct this? TIA Tom N4TJ
[Dx4win] Filter for LoTW!
EA6NB: Hola. Si tienes en el DX4WIN definidos grupos para tus varios indicativos (como yo), y el grupo 0 ea para EA6NB, filtra con ese grupo y después procede como con el EH6... 73 de Isidro, EA8NQ If you already have defined some group numbers for your callsigns (as I have), and the group cero is for your normal callsign, filter on that group number and proceed as before... 73 de Isidro, EA8NQ - Mensaje original - De: Jaime P.Ullívarri [EMAIL PROTECTED] Para: dx4win@mailman.qth.net Enviado: sábado 14 de junio de 2003 12:31 Asunto: [Dx4win] Filter for LoTW! Hello all, I would like to send my log for beta testing but I have a problem as other EA's. My normal callsign is EA6NB but for 6M is EH6NB, as it is for all EA with 6m license. I have all my qso's in the same log (from 160 to 6m) in DX4win software. I will have to send a separate log as EH6NB, not problem, Filter-Selection-Export. But how I export my log without 6M QSO's, as EA6NB? There is an easier way from DX4win, as to export to EXCEL and filter the QSO's there? 73, Jaime EA6NB, ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Strange flaw in Importing with DX4WIN Filter
Another most strange thing I discovered occurs when Importing a DXQ File with DX4WIN3, DX4WIN4 or DX4WIN5 filters. If the QSO time has 59 seconds in it the number or seconds is changed to 58 during importing!!! Can you believe it? I spent quite a few hours trying to figure out why I get duplicate QSOs in my log when I export some QSOs and then Import the same QSOs back selecting: IMPORTED QSO REPLACES EXISTING QSO. I did this operation because I wanted to set the CONFIRMED label to N for a group of QSOs and this is not included into Multiple QSOs Operations. So I had to EXPORT-IMPORT them. So for every 100 QSOs or so I got one identical duplicate and I did not have the Show Seconds in Time marked in Preferences. So it was quite a puzzle till I finally got to it. I checked with other second figures and no problem but 59 is always changed to 58:))) Can you confirm? 73 tonno es5tv
[Dx4win] Filter Help
Can or has someone put together a list of keystrokes or parameters that could be considered standard filters? For example, I'd like to know where I stand in re: WAS, but as I appear not to have flagged any of them for submission, I'm not sure how to do it. Likewise with IOTA, et al. Thanks in advance, Eric W3DQ Washington, DC
[Dx4win] Filter Selection
Amazing that this mail came just few days after I decided to combine all my logs into one, wich I call it by Master Log. I have been now very busy the past four days with this, and my wife is not so happy about it, hi...hi... I also noticed that besides the problems you wrote here, that also when logging a new QSO, it will be on Alllogs, not in the log using filter selection , It would be nice that when we are on the filter selection that the QSO entered would be on this same log and not to the Alllogs in my case Master log I also agree with Bob and Alan, this is really neat solution but still missing some small things. The solution in my case is not to have another log from a diferent DXCC into my Master, but then is also the most of the point with the sytem gone. If one wants to be able to tell the operator that we have had QSO on this and that time with different calls, so will the price be paid for uncertain spots comming in and don't really know if we have worked with our call or another, like said before by Bob and Alan. I hope this will be added in the next update, I still using the V5.01 and have the V5.03 on disk waiting yet, I just don't think it is worth to try update just now when I'm having my DX4WIM working very fine now, it takes really a lot of time to make the updates work propely and neat, hi...hi So if someone have any comments to my mail please be kind to send us an e-mail clearing my mind for what should I do with this situation. I think this Log program is great, I have been using a lot of others before, and still using one major one for contest, but whn it comes to log it DX4WIN and no other one. Thanks for all. LA9PJA - JW9PJA Carlos Ferreira Drammen - Norway www.la9pja.com [EMAIL PROTECTED] - Original Message - From: Alan C. Zack [EMAIL PROTECTED] To: Bob Henderson [EMAIL PROTECTED] Cc: DX4win@mailman.qth.net Sent: Monday, March 04, 2002 7:35 PM Subject: Re: [Dx4win] Filter Selection I would be very interested in this solution also. I have a similar situation here. I have DXCC from both my home California operations plus DXCC from my portable DU (Philippines) operations. I use group names to separate different contests, DU QSO's from USA QSO's, etc. But when logging a new country and it tells me confirmed or needed I don't know if it is confirmed or needed for USA DXCC or DU DXCC. Bob Henderson wrote: I have consolidated my logs from various dx-peditions together with my home logs into one big log called Alllogs and I have tagged each entry with the call I worked under using the Group Names facility. This is really neat as it allows me to see all of my previous qsos with a station regardless of where I was operating in the Other QSOs window. It also provides a very efficient way of dealing with incoming QSL cards as I no longer have to sort these by my call before entering the info and printing lables. As I print the Group Name on each lable I can print out lables for all my calls on a single sheet. I just have to peel them off and make sure I stick 'em on the right card! The only rub with this is that when I am using DX4WIN on the bands I want to see whether I have worked a country from the location I am in, which is mostly 5B4 at the moment. When I load up DX4WIN it defaults to no filters, so my country check info is against my combined log file rather than 5B4. I have to get around this by selecting my Cyprus filter which consolidates my 5B4AGN, 5B4/G3ZEM P3F parts of Alllogs to give me what I want. Is there any way DX4WIN can be set to default to an already specified filter on start up? In this case Cyprus. Setting up the filter every time I start up DX4WIN is becoming a bit of a chore. Thanks Bob 5B4AGN/P3F/ZC4ZM also 5V7ZM/9G5ZM/C21ZM/ZD9ZM/G3ZEM ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- __ Amateur Radio Station K6ACZ Anaheim, Southern California, USA Quality Engineer, The Boeing Company, Retired Aviation Chief Warrant Officer, U.S. Coast Guard, Retired U.S. Coast Guard, Always Ready, Always There Every hour, Every day, Around the Clock and Around the World SEMPER PARATUS ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Filter Selection
I have consolidated my logs from various dx-peditions together with my home logs into one big log called Alllogs and I have tagged each entry with the call I worked under using the Group Names facility. This is really neat as it allows me to see all of my previous qsos with a station regardless of where I was operating in the Other QSOs window. It also provides a very efficient way of dealing with incoming QSL cards as I no longer have to sort these by my call before entering the info and printing lables. As I print the Group Name on each lable I can print out lables for all my calls on a single sheet. I just have to peel them off and make sure I stick 'em on the right card! The only rub with this is that when I am using DX4WIN on the bands I want to see whether I have worked a country from the location I am in, which is mostly 5B4 at the moment. When I load up DX4WIN it defaults to no filters, so my country check info is against my combined log file rather than 5B4. I have to get around this by selecting my Cyprus filter which consolidates my 5B4AGN, 5B4/G3ZEM P3F parts of Alllogs to give me what I want. Is there any way DX4WIN can be set to default to an already specified filter on start up? In this case Cyprus. Setting up the filter every time I start up DX4WIN is becoming a bit of a chore. Thanks Bob 5B4AGN/P3F/ZC4ZM also 5V7ZM/9G5ZM/C21ZM/ZD9ZM/G3ZEM
