[Dx4win] test
Hello everyone. This is a test to make sure that I am finally back on the reflector. I changed to a DSL service on January 6th. I unsubscribed the reflector using my old e-mail address and server. I tried to subscribe to the list again with my new address and server. For some reason, the robot would not let me subscribe with my new address until today. I have no idea why it would not respond to my request for over a month. I did not change anything in my set up. But, I tried it again today and it says I am subscribed again. 73Dick KS0M Richard C. Dick White[EMAIL PROTECTED] Fulton, MO. 65251 Amateur Radio Station - KS0M (ex WB0WLX / KC0MY ) ARRL Honor Roll / CW - 5BDXCC / CW #3295 Life Member American Radio Relay League
[Dx4win] M2 2800 RS232 Protocol Update
Confirmed, for those if anyone interested. 73, Byron From: Wyatt Lyzenga [EMAIL PROTECTED] Byron, Yes the protocal has changed. We are currently working with the other software designers to have them update their software. We were unaware of the changes at the time the new board was built. We are working quickly to have company's like DX4WIN and WRITElog get up to speed. Regards, Wyatt - Original Message - snip One question, though: Did you change the RS232 interface protocol at all? Neither DX4WIN nor WRITElog seem to work with it now. DX4WIN can't give it three digit numbers for direction. It only takes the first two (which means it can't automate a turn beyond 35 degrees). I'm guessing the next command is ignored because there is still a character out unused. Then the next command works, up to two digitis, and so on. In WRITElog, I had less success. HYPERterm works as documented in the new manual pages. snip
[Dx4win] EXT DATA -- from QRZ.com on line
I wish to thank Chaz Cone for supplying the magic that allowed me to = use the QRZ.COM web access mentioned in the Version 6.0 manual. The secret is to put the QRZ.COM URL (www.qrz.com) in both the Call sign lookup address and the QSL lookup address sub windows of the EXT DATA window. Then when one places the cursor on the Call in the regular QSO window and presses the [F3]key a blank window appears with call sign in = the lower left corner. Now hit the [ENTER] key and the QRZ screen will = appear.=20 Overall it is not as slick as pulling up the information from a CD = that has been stored on one's hard drive, but it does work. Tod, K=D8TO
[Dx4win] EXT DATA -- from QRZ.com on line
That is not working for me in 6.02. When I hit [ENTER}, it tries to open the QRZ.com site, but flashes through it to a Cannot display screen. The reason for this becomes apparent---the URL entered in the IE address bar is www.qrz.com, but with the DX callsign appended to the .com! Would someone like to take a crack at explaining that? Garry, NI6T -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Tod - ID Sent: Monday, February 16, 2004 9:50 PM To: 'DX4Win' Subject: RE: [Dx4win] EXT DATA -- from QRZ.com on line I wish to thank Chaz Cone for supplying the magic that allowed me to use the QRZ.COM web access mentioned in the Version 6.0 manual. The secret is to put the QRZ.COM URL (www.qrz.com) in both the Call sign lookup address and the QSL lookup address sub windows of the EXT DATA window. Then when one places the cursor on the Call in the regular QSO window and presses the [F3]key a blank window appears with call sign in the lower left corner. Now hit the [ENTER] key and the QRZ screen will appear. Overall it is not as slick as pulling up the information from a CD that has been stored on one's hard drive, but it does work. Tod, KØTO ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] EXT DATA -- from QRZ.com on line
Thanks for the tip Chase. and greetings to Tod Tod too? Jos still looking for Idaho ...! 73's Jos on4kj - Original Message - From: Chaz Cone [EMAIL PROTECTED] To: DX4Win dx4win@mailman.qth.net Sent: Monday, February 16, 2004 5:07 PM Subject: Re: [Dx4win] EXT DATA -- from QRZ.com on line At 12:37 AM 2/15/2004, Tod wrote: Being unreasonably lazy I am posting this so I can avoid an archive search if there is nothing there. I finally installed DX4WIN 6.02 and set all of the preferences to what had been the settings for DX4WIN 5.3 in my environment . Things seem to work just fine. I decided to see about using the Version 6.02 feature that allows one to do a Website Call sign Lookup (page 33 of the Version 6.0, January 2003 Manual). There is a reference to a field labeled callsign which I interpret to be the one labeled Website callsign address on the EXT DATA popup window for setting parameters in my version of 6.02 . When I try to use the example shown for accessing QRZ.COM I get no result displayed. If I change back to use one of the CD ROM databases the call sign information appears immediately (as it normally does). I have tried a number of alternatives with no success. I do use DXTELNET spotting and have no problem getting it to perform properly in Version 6.02. My question is: Is there a bug with respect to the Website Callsign Lookup option or is this simply a case of cockpit error? There is a follow on question if the answer is cockpit error -- Has this been discussed before and the answer provided somewhere in the archives? And a final follow on query -- if it is in the archives does anyone have a guess as to what month it might be in? Tod, KØTO Tod, I had the same problem. You have to put the qrz.com url in both the callsign lookup AND QSL manager fields. Works fine then. Chaz ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win