[Dx4win] MMTTY in DX4WIN 8.05

[Mark Endorf]

I just loaded DX4WIN 8.05, and when launching MMTTY is gives an error
indicating it can't start MMTTY. Still works in older DX4WIN version?

Any ideas?

Thanks

Mark 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] WAZ award listing

[Mark Endorf]

It is both LOTW and paper confirmed. I even changed the WAZ award in the
lower part of the logging window to "C", and it still doesn't even looked
like a QSO has been made in the awards window.
Mark

-Original Message-
From: Brian Bird [mailto:n...@aol.com] 
Sent: Tuesday, February 02, 2016 12:47 PM
To: Mark Endorf; dx4win@mailman.qth.net
Subject: Re: [Dx4win] WAZ award listing

Mark,

Being the WAZ award is not on LoTW, could it be the difference between a
paper QSL confirmation compared to a LoTW confirmation?

Brian - NX0X
Sent from my iPad

> On Feb 2, 2016, at 12:36 PM, Mark Endorf <mend...@centurylink.net> wrote:
> 
> In my awards listing for WAZ, I have a single band-zone combination 
> with just a single QSO. It is confirmed as shown in the QSO window, 
> but when I go to the awards listing, it does not even show that that 
> particular zone/band combination has even been worked.
> The only difference in this QSO vs. the many other which seem to show 
> up OK is that this was a digital JT-65 QSO.
> Any ideas?
> 
> Mark WA0MHJ
> 
> 
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] WAZ award listing

[Mark Endorf]

In my awards listing for WAZ, I have a single band-zone combination with
just a single QSO. It is confirmed as shown in the QSO window, but when I go
to the awards listing, it does not even show that that particular zone/band
combination has even been worked.
The only difference in this QSO vs. the many other which seem to show up OK
is that this was a digital JT-65 QSO.
Any ideas?

Mark WA0MHJ


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Events window

[Mark Endorf]

Thanks everyone.

Mark WA0MHJ

-Original Message-
From: Jim Reisert AD1C [mailto:jjreis...@alum.mit.edu] 
Sent: Wednesday, April 13, 2016 6:09 PM
To: Herman Wientjes
Cc: Mark Endorf; DX4WIN Reflector
Subject: Re: [Dx4win] Events window

It's described on the web page:

http://dx4win.ad1c.us/updater/#calendar


On Wed, Apr 13, 2016 at 3:48 PM, Herman Wientjes <wientjesher...@gmail.com> 
wrote:
> Preferences, QSO, Check Calendar at Startup.
>
> 73 Herman  PA9CC
>
>
>
> 2016-04-13 23:37 GMT+02:00 Mark Endorf <mend...@centurylink.net>:
>
>>
>> Just recently I have a new window popping up when I launch DX4WIN 
>> called "Events Calendar".
>> I do not want it, nor do I want to close it every time I launch DX4WIN.
>> How do I get rid of this permanently?
>>
>> Mark WA0MHJ
>>
>> __
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html
>>
>
>
>
> --
> mvgr
>
> Herman Wientjes.
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html



--
Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Events window

[Mark Endorf]

Just recently I have a new window popping up when I launch DX4WIN called
"Events Calendar".
I do not want it, nor do I want to close it every time I launch DX4WIN.
How do I get rid of this permanently?

Mark WA0MHJ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Master calls

[Mark Endorf]

I saw something mentioning that the file name for Master Calls which is now
expected to be mstrcals.dat, used to be something else in version 8.05, but
can't find that comment.
How do I get the Master Calls window to appear again?

License file appeared lightning fast, and install went easy!

Mark WA0MHJ


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Error when spotting

[Mark Endorf]

I have a consistent error message when trying to spot BW/JH1GNU.
I was able to announce several DX on either side of this QSO, but cannot
announce this one.
The error message is simply a repeat of whatever is in the outgoing message
field.
Odd.

Mark WA0MHJ


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MSTCALS.DAT Not Found

[Mark Endorf]

Also restart DX4WIN after the update finishes.

73 Mark WA0MHJ

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of Kostas SV1DPI
Sent: Tuesday, October 24, 2017 1:27 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] MSTCALS.DAT Not Found

Do an update Help>Check for Update

...73 de Kostas SV1DPI
   (One of SZ1A-EP6T)

Στις 24/10/2017 8:12 πμ, ο Bud Governale, W3LL έγραψε:
> Each time I start 9.0.1 I get an error message:
>
> Master file:
> C\dx4w901\save\mstcals.dat
> not found, no calls loaded.
>
> How do I fix this?
>
> 73,
>
> Bud W3LL
> w...@arrl.net
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to sv1...@otenet.gr
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mend...@centurylink.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] No CW Window

[Mark Endorf]

Any ideas as to why the CW Window will not appear with Alt-K or via the drop 
down menu? It is not behind another window, nor off screen.
Thanks!

Mark WA0MHJ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Rig CAT

[Mark Endorf]

Hello,
I just recently noticed that in the QSO logging screen when I am ready to
add a new QSO, the band indicates correctly what it is receiving from the
radio. However when the cluster is active, and feeding very frequent spots,
the band will briefly change to match the spot received. I am almost 100%
sure this is not the way it has behaved in the past. If you are about to
enter a QSO, the log window should only be looking at the radio CAT data for
the band.
I do not have focus on the spot window, and everything seems to be working
as it should. I just do not ever remember the grayed out band data
constantly changing as the cluster spots are received.
Is this normal?

73
Mark WA0MHJ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Contest log program

[Mark Endorf]

A good contest program to use is N1MM.
All of the contest programs are capable of generating an ADIF file which you
then can import into DX4WIN.
73
WA0MHJ

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Scott Millick
Sent: Monday, February 18, 2019 2:30 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Contest log program

What is a good contest program to use with dx4win

Sent from my iPhone

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Importing county line QSO's

[Mark Endorf]

I think this has been addressed before, but what is the easiest way to
import an ADIF file containing county line QSO's?
DX4WIN will stop the import operation, interpreting it as a duplicate QSO.
Thanks!

Mark WA0MHJ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] DX4WIN locks up on file import

[Mark Endorf]

Last night a Windows update occurred. (DX4WIN was active)
Today I seem to be able to add QSO's and save them, but any attempt to
import my ADIF log from my WSJT-X contacts causes DX4WIN to lock up.
Spinning wheel with no import happening.
Any ideas?
73
Mark - WA0MHJ


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN locks up on file import

[Mark Endorf]

I have recently updated to WSJT-X release candidate 2.2.2. Upon launching 
WSJT-X, I now get a pop up window indicating “Error scanning ADIF log”.  
“Invalid ADIF header.”

I took my existing file called wsjt_log.adi (the one I am trying to import), 
and renamed it to temp.adi. I then made a few new contacts in FT-8 mode. I was 
going to try to import the new contacts, but when I re-launch WSJT-X, I get the 
same error message.

I was beginning to think, the problem is with the new version of WSJT-X. Both 
ADIF files initially looked proper to me, but I see that the header is labeled  
“WSJT ADIF Export ”.

 

I renamed  to , and now everything is working properly. Isn’t  
the proper end-of-header for all ADIF versions?

I am running the latest release with all updates installed on a Windows 7 
platform.

Perhaps if any of you are part of the WSJT user groups, this issue can be 
presented there.

 

Mark WA0MHJ

 

From: Lee Hallin [mailto:hall...@lanecc.edu] 
Sent: Tuesday, June 30, 2020 12:08 PM
To: Mark Endorf; Hallin, Lee
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN locks up on file import

 

Hi Mark,

 

Assuming your .DXL log file is WA0MHJ.DXL, see if you have a WA0MHJ.~DXL file.  
If so, copy it to a unique name.  This .~DXL file is a recent copy of 
WA0MHJ.DXL.

 

What version of DX4WIN is this happening with?

 

If you create a "new" (different name) DX4WIN log file, can you import the 
WSJT-X file?

 

Do you have another PC with the same version of DX4WIN on it?

If so, move your logfile.DXL (save a copy of logfile.dxl first if it 
already exists on that PC) and WSJT-X file to that PC and try the import again.

 

Do you have OTHER  WSJT-X ADIF files you could import?

If so:

   1) Copy your logfile.DXL file to a new unique name (debug.dxl)

   2) Go into DX4WIN

   3) Open the debug.dxl file (or whatever you named it in step 1 above)

   4) Try importing a different WSJT-X file (not the one that you used 
before)

   5) Did the import work?

  If yes, try importing the WSJT-X file that didn't work earlier.  
Did it work?

   

Let us know how it went and we can go from there :)

 

73,

Lee  N7NU

 

On Tue, Jun 30, 2020 at 6:33 AM Mark Endorf  wrote:

Last night a Windows update occurred. (DX4WIN was active)
Today I seem to be able to add QSO's and save them, but any attempt to
import my ADIF log from my WSJT-X contacts causes DX4WIN to lock up.
Spinning wheel with no import happening.
Any ideas?
73
Mark - WA0MHJ


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Lost country

[Mark Endorf]

It appears that my credit for XV5AC (Vietnam) has been removed. My 1973 QSO
show that it is not mapped to any country now.
On first glance, it appears I may have lost a few more.

Mark - WA0MHJ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Labels

[Mark Endorf]

It might be a stretch, but I print my labels with a different font and 
different color for just the call sign.
If the selected font is no longer on your computer, or your printer is out of 
ink for the selected color, then I think that might happen.

Mark  WA0MHJ

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of n...@frontier.com
Sent: Tuesday, December 22, 2020 11:07 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Labels

I had not printed mailing labels for a while.  I got an envelope from the buro 
the other day so I had to print some.  



For some reason unknown to me the labels did not print the way they did the 
last time I printed them.  Instead of showing all the information I usually got 
on the labels, it only printed the date of the qso,the time of the qso the band 
of the qso,the signal report of the qso and the mode of the qso. 
Verified and printed by DX4WIN also was printed at the bottom.  The call of the 
station I worked was not printed. Same problem when I show preview look ok but 
don't print call sign worked when I run labels 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] TELNET connections

[Mark Endorf]

Perhaps someone who uses DXTELNET in conjunction with DX4WIN can help me.

All of a sudden my computer (Windows 7) stated giving pop up messages
indicating Windows firewall is blocking access to programs.
I would select "allow", but it does not seem to matter.
In DX4WIN, the DXTELNET hangs without connecting to any cluster.
In N1MM, the TELNET window also hangs.
The program JT-Alert launches, but then gets a "program not responding"
window and then shuts down.
I went into the firewall settings and enabled both private and public, for
virtually every program listed. Now N1MM works, but DX4WIN/DXTELNET and
JT-Alert still do not. I am reluctant to completely disable Windows
firewall, and haven't tried that yet, but wonder if something else is going
on?

73
Mark WA0MHJ


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Syncing LOTW to Log

[Mark Endorf]

I think what you are looking for can be accomplished by logging into LOTW,
and in the tab for "Your QSO's", select to download report.
Once this is brought into DX4WIN, you should be in sync.

73
Mark WA0MHJ

> Hi,
>
> I have tested the waters and have tried some different logging 
> programs, but I still prefer DX4Win as far as tracking awards, etc.  I 
> thought I had found *the* logging software and had moved everything 
> over, but after trying it for awhile I find it lacking in award 
> tracking.  I have imported my new log into DX4Win but it isn't even 
> close to my LoTW records.  I have looked at Jim's excellent utilities 
> and tutorials on how to sync the data, but it doesn't seem to work.  I 
> really don't want to go in and manually fix it as I have a lot of records.
Any ideas?
>
> Thanks and 73,
>
> Terry, W0ZS
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Beware of an empty RST field in a QSO!

[Mark Endorf via DX4WIN]

I have had a situation in WSJT-X where the reply to my report comes much,
much later. 
If I have cleared the right hand decode window prior to that, and then try
to log the contact, it has blanks in the RST field. I try to only clear the
right hand window, when all contacts have been confirmed, but if someone
comes back with a report four or five minutes later, then it's likely I have
cleared out the info. Maybe that is what happened?
Mark WA0MHJ

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Wednesday, December 01, 2021 3:25 PM
To: Mike Cizek W0VTT
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Beware of an empty RST field in a QSO!

>
> Looking at my log, all of the VHF Contest mode QSOs with no signal 
> reports have 599 in the report fields in dx4win.  I don't see any 
> place in the settings for selecting a default RST, so that must be 
> built in to the program.  I think the real question is why are your RST
fields blank?
>

Mike, it was just that one QSO.  I don't know what happened. But finding it
ultimately saves me from sending a "duplicate" QSL to ARRL for VUCC credit.
If I had known earlier, I could have saved postage + SASE costs for
obtaining that QSL!

--
Jim Reisert AD1C, , https://www.ad1c.us

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html