[Ekiga-list] Please help setting up Ekiga to work via Thomson 585 router
Hi, I am trying to get Ekiga to work with a Thomson TG585 v7 wireless router, which I share with my neighbor. My computer is Intel Core 2 quad and O/S is arch Linux x86_64 with kernel 3.0.1. I have tried many suggestions I found by searching the Internet, including setting up port forwarding manually, setting up a static IP connection, disabling STUN and network detection, but to no avail. With network detection enabled, ekiga always gives me an error message, requesting manual prot forwarding setup which doesn't help. Otherwise it says that registration with the SIP provider (both ekiga.net and iptel.org) failed. Trying to use one of the services of ekiga.net (echo test etc) gives me a Security check failed error. I have uploaded the output of ekiga -d 4 to my website: http://www.qsl.net/5b4az/pages/ekiga-debug.txt to avoid a large post here. My thanks in advance! -- Regards Neoklis - Ham Radio Call 5B4AZ QTH Locator KM64KR Website: http://www.qsl.net/5b4az/ ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Microphone not detected only with ekiga
Hello, I just wanted to followup and see if the ekiga -d 4 output was not enough to diagnose the problem. I'm happy to send any other info needed. Once again that output can be found here: http://www.4shared.com/document/RF_HTmAa/output.html Thanks for your help, Joseph ekiga -d 4 output is posted here. http://www.4shared.com/document/RF_HTmAa/output.html Thanks again for your help! On 08/25/2011 07:28 AM, ekiga-list-requ...@gnome.org wrote: Hello, I've just installed Ekiga 3.2.7 on OpenSuse 11.4, 2.6.37.1-1.2-desktop, on a Thinkpad T410 (single audio combo jack). I've followed the Audio Setup page, set all audio devices to the Default (PTLIB/ALSA) (and later everything else just to check), I confirmed that my ALSA configuration was working properly as both echo tests functioned flawlessly: $ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE - $ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 16000 -f S16_LE - But I am unable to perform an echo test within Ekiga. I can receive calls and hear the audio, but the microphone will not pick anything up. Looking at other archives, I didn't see a solution that worked for me. More info that might be useful: $ alsamixer tells me that Master and Capture are both 100% $/sbin/lspci | grep Aud 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) The codecs are set to their defaults: Speex, PCMU, PCMA, silence detection and echo cancelation are not enabled. The same headpiece performs under skype. I'm happy to send any other information. Send us the -d 4 output when calling 5...@ekiga.net and when you speak you do not ehar yourself. ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] Ekiga to call a Tandberg system
Hi, i'm trying to be able to call my Tandberg Edge 95 from a PC client. It seems Ekiga should be able to do it, but for now, it won't. May be some one could be help me to do that ? -- View this message in context: http://ekiga.1756082.n4.nabble.com/Ekiga-to-call-a-Tandberg-system-tp3778472p3778472.html Sent from the Ekiga General mailing list archive at Nabble.com.___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] Ekiga on Thomson TG585 v7 router: Getting desparate!
Hi, For all the effort I put into getting Ekiga to work on my machine (Intel core2-quad, Arch Linux x86_64), it still fails to register with the SIP providers (tried both ekiga.net and iptel.org). When I try the echo etc services of ekiga.net, I get the error message Security check failed). I have tried setting up port forwarding manually on the Thomson TG585 v7 wireless router, disabled STUN, tried both dhcp and static connection and anything else I could find by searching. I feel that I must be missing some simple detail somewhere, but cannot figure it out. I have uploaded the ekiga -d 4 debug output to my website, at the link below. http://www.qsl.net/5b4az/pages/ekiga-debug.txt Please help! Thanks in advance. -- Best regards Neoklis - Ham Radio call 5B4AZ QTH Locator KM64KR Website: http://www.qsl.net/5b4az/ ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Please help setting up Ekiga to work via Thomson 585 router
Le 31/08/2011 10:33, *Neoklis Kyriazis* a écrit fort à propos : Hi, I am trying to get Ekiga to work with a Thomson TG585 v7 wireless router, which I share with my neighbor. I don't know the TG585 model but I assume it is not very different to my ST716v5 since they are built with Broadcom chipsets. In that one I had to modify the default settings as follows, using telnet: 1) connection unbind application=SIP port=5060 (source : http://www.voip-info.org/wiki/view/Routers+SIP+ALG) 2) connection bind application=CONE(UDP) port=3478 Then Stun works for Linphone and it is not needed to NAT any port. Ekiga seems to be a bit more exacting however but I am not able to say more. With network detection enabled, ekiga always gives me an error message, requesting manual prot forwarding setup which doesn't help. Otherwise it says that registration with the SIP provider (both ekiga.net and iptel.org) failed. Trying to use one of the services of ekiga.net (echo test etc) gives me a Security check failed error. Ekiga echo test is very often down... ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] Ekiga 3.2.7 massively slow under xfce debian testing?
Hi there, Does anyone have this problem? in Xfce (testing only, stable works fine), ekiga 3.2.7 becomes incredibly slow to open and becomes unresponsive rather often. Andres Cimmarusti ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list