Hello, I just wanted to followup and see if the ekiga -d 4 output was not enough to diagnose the problem. I'm happy to send any other info needed. Once again that output can be found here: http://www.4shared.com/document/RF_HTmAa/output.html
Thanks for your help, Joseph > ekiga -d 4 output is posted here. > <http://www.4shared.com/document/RF_HTmAa/output.html> > Thanks again for your help! > > On 08/25/2011 07:28 AM, [email protected] wrote: >>> Hello, >>>> I've just installed Ekiga 3.2.7 on OpenSuse 11.4, 2.6.37.1-1.2-desktop, >>>> on a Thinkpad T410 (single audio combo jack). >>>> >>>> I've followed the Audio Setup page, set all audio devices to the Default >>>> (PTLIB/ALSA) (and later everything else just to check), I confirmed that >>>> my ALSA configuration was working properly as both echo tests functioned >>>> flawlessly: >>>> >>>> $ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 >>>> -c 1 -r 8000 -f S16_LE - >>>> $ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0 >>>> -c 1 -r 16000 -f S16_LE - >>>> >>>> But I am unable to perform an echo test within Ekiga. I can receive >>>> calls and hear the audio, but the microphone will not pick anything up. >>>> Looking at other archives, I didn't see a solution that worked for me. >>>> >>>> More info that might be useful: >>>> $ alsamixer >>>> tells me that Master and Capture are both 100% >>>> >>>> $/sbin/lspci | grep Aud >>>> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset >>>> High Definition Audio (rev 06) >>>> >>>> The codecs are set to their defaults: Speex, PCMU, PCMA, silence >>>> detection and echo cancelation are not enabled. >>>> >>>> The same headpiece performs under skype. >>>> >>>> I'm happy to send any other information. >> Send us the -d 4 output when calling [email protected] and when you speak >> you do not ehar yourself. _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
