[Elecraft] KIOB
Don is right as usual. I, too, am very happy with my three USB interfaces (K3, KPA500 and digital PTT), external sound card and 7-port USB hub. Although I upgraded my two K3’s with a total of four KSYN3A’s and two KXV3B’s, I decided not to order the KIO3B which “Eliminates need for PC soundcard and cables”, i.e. would make all that stuff, which cost about twice as much as one KIOB, “obsolete”. YMMV... 73 Richard - HB9ANM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIOB
Well, being that I am 24/7 in my Motorhome, I want the KIOB upgrade to help reduce the , dare I say, clutter at the back of my wireless. Hmm, that's a misnomer... Santa has informed me he is running late and my KIOB will not be delivered till the 1st quarter, 2016. Guess he knows Eric well. Sigh.waiting at the bottom of the list.. Gary -Original Message- From: "Richard - HB9ANM"Sent: 17/12/2015 7:45 AM To: "elecraft@mailman.qth.net" Subject: [Elecraft] KIOB Don is right as usual. I, too, am very happy with my three USB interfaces (K3, KPA500 and digital PTT), external sound card and 7-port USB hub. Although I upgraded my two K3’s with a total of four KSYN3A’s and two KXV3B’s, I decided not to order the KIO3B which “Eliminates need for PC soundcard and cables”, i.e. would make all that stuff, which cost about twice as much as one KIOB, “obsolete”. YMMV... 73 Richard - HB9ANM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to vk1zzg...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B
Hi Bill (and everyone else interested in the KIO3B upgrade), Unfortunately pulling the KIO3B boards out of a packaged K3S kit or already built K3S is not practical, and would really cause production problems here. We build the assembled K3S base units ahead of time before option configuration, and for kits, the KIO3B boards are inside of sealed boxes of kitted product packaged ahead of time. We are also fully maxed out getting December orders out the door for last minute shoppers, presents etc. Fortunately, we will begin taking orders for the KIO3B board set the week after next - after the holiday rush. This will probably on either the 29th or 30th, and we expect to begin shipments 5-10 days after that. We should have the extra KIO3B boards in-house and tested by then. Please do not try to order or call before we announce that the order form is up as we do not have the web order form or internal order systems ready to handle KIO3B upgrade orders. (We prefer on-line orders to avoid phone overload here..) We are also maxed handling the holiday order rush. We will post here on the Elecraft List and of course on our web page as soon as we are ready to take orders and the order form is up and running. We're running as fast as we can - Its a busy month at Elecraft this time of year. 73, Eric /elecraft.com/ On 12/16/2015 8:03 AM, Dr. William J. Schmidt, II wrote: I feel a bit responsible for this thread and it needs to end. The issue for me is that my radio is at my place on J6 where my electronics lab is not. I have three options: 1. Bring the radio back and fix it, 2. Try to fix it down there (with very minimal resources), or 3. Bring a new part down with me to swap out and trouble shoot the broken part back here in the states. Ordering a new KIO3 would be less than smart. I decided last night i would simply order a new K3s, tell Elecraft to hot shot the KIO3B out of it and keep the radio/ send the radio with a replacement KIO3B when they become available (months from now, i don't care). Theres more than one way to skin this cat! Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Macros
Hi everyone, I have two Macros set up to change the audio input on my K3 from the front panel to the Line In on the rear panel. They worked fine until one of the latest big releases: Macro 1: MNO53;DN;DN;DN;MN255: Macro 2: MNO53;DN;DN;DN;UP;MN255: Macro 1 sets the K3 to the mic connector on the front and Macro 2 sets the input to Line In on the rear panel. When I execute them, they come up to the display and I have to rotate the dial to select the input. Previously, they just worked. Any ideas? Thanks. Larry, KN8N __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lightweight headset/mic solution for KX3?
I used an iPhone earbud during the ARRL VHF contest. I used the MH3 microphone for SSB and the combination worked fine. After my wife Peri, KI6SLX brought my CM-500, I was even happier due to the better isolation from that set of headphones. (We had 3 stations in one tent.) 73 Bill AE6JV On 12/16/15 at 7:24 PM, n...@elecraft.com (Wayne Burdick) wrote: What I'm hoping to find is something like the iPhone headset but with two plugs (one for the headphone jack, one for the mic jack). The Logitech H165 fits the requirements but is very expensive. - Bill Frantz| Re: Hardware Management Modes: | Periwinkle (408)356-8506 | If there's a mode, there's a | 16345 Englewood Ave www.pwpconsult.com | failure mode. - Jerry Leichter | Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lightweight headset/mic solution for KX3?
I've used the iPhone headset, but it does require an adapter. So far I haven't found an adapter that I like; they seem to be fragile or have a too-loose connection. What I'm hoping to find is something like the iPhone headset but with two plugs (one for the headphone jack, one for the mic jack). The Logitech H165 fits the requirements but is very expensive. Wayne N6KR On Dec 16, 2015, at 7:18 PM, "J.K. Hooper"wrote: > Wayne, > > Sounds like you use an iPhone-like earbud w/mic with your KX3. Whose > adapter cable do you use and what KX3 mic settings? > > 73, > Hoop > K9QJS > > > > On Dec 16, 2015, at 18:29 , Wayne Burdick wrote: > > Hi all, > > Awhile back, Bill, KT5W, recommended the Logitech H165 "notebook headset" as > a decent stereo earbud+mic solution for ultraportable operation. The H165 has > two 3.5-mm stereo plugs -- one for the headphone jack, one for the mic jack > -- some noise filtering, and a mute switch. It would appear to be ideal for > this application. > > The one catch is that it's a bit pricey. > > Anyone find a good alternative? For my minimalist go-bag, I'd like to stick > with this earbuds-plus-mic-on-cable form-factor. Large ear pieces won't fit. > > Thanks, > > Wayne > N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIOB
Gary, In the "olden days", we did not have such clutter. If one is willing to do paper logging, there is no need for a computer connection and if we stick to SSB and CW, we only need a microphone and a key - KISS principle, and no extra cables except for the mic and key cables. Problem is that we 'want it all', and so the cable clutter expands without bounds as each additional device is introduced. I am planning a new operating desk that can be pulled away from the wall so I can access the rear of the equipment and hopefully keep those 'extra' cables neat and tidy. It may be a while before that is realized. 73, Don W3FPR On 12/16/2015 6:57 PM, Gary wrote: Well, being that I am 24/7 in my Motorhome, I want the KIOB upgrade to help reduce the , dare I say, clutter at the back of my wireless. Hmm, that's a misnomer... Santa has informed me he is running late and my KIOB will not be delivered till the 1st quarter, 2016. Guess he knows Eric well. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIOB
Hmmm ... a big problem for me is that cables seem to come in lengths that are almost universally too long. I have a Wi-Fi dongle on top of the RemoteRig box with a 6 ft [1.83 m] Cat5 cable connecting it to the RR box, all of 1 inch [2.54 cm] below it. Sadly an RJ-45 crimper is expensive and I'd use it a few times, probably all in one day, and never again. The "USB" cable from the wall wart that powers the dongle is also 6 ft [1.83 m] long. It only needs to be 6 in [15.24 cm] long. Nick of Pignology made me a short flat cable from the PigKnob interface to the K3 right below it, replacing about 8 ft [2.44 m]. I wonder if there is a market out there, every contemporary ham station I've seen gives lie to the term "wireless." 73, Fred K6DGW - Northern California Contest Club - CU in the Cal QSO Party 1-2 Oct 2016 - www.cqp.org On 12/16/2015 4:10 PM, Don Wilhelm wrote: In the "olden days", we did not have such clutter. If one is willing to do paper logging, there is no need for a computer connection and if we stick to SSB and CW, we only need a microphone and a key - KISS principle, and no extra cables except for the mic and key cables. Problem is that we 'want it all', and so the cable clutter expands without bounds as each additional device is introduced. I am planning a new operating desk that can be pulled away from the wall so I can access the rear of the equipment and hopefully keep those 'extra' cables neat and tidy. It may be a while before that is realized. 73, Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIOB
On Wed,12/16/2015 4:49 PM, Fred Jensen wrote: a big problem for me is that cables seem to come in lengths that are almost universally too long. One of the virtues of a cable with extra length is that it's easy to add a common mode choke to it by winding some or all of that excess length through a ferrite core. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Macros
Larry, Menu support for the UP and DN commands was unintentionally removed a long time ago. It was added back in as of rev. 5.33. I tested your macros, and they work with the latest release (5.38), except that you need two "UP;" commands to go from FP mic to LINE IN. 73, Wayne N6KR On Dec 16, 2015, at 5:55 PM, Larry Boekeloowrote: > Hi everyone, > I have two Macros set up to change the audio input on my K3 from the front > panel to the Line In on the rear panel. > They worked fine until one of the latest big releases: > Macro 1: MNO53;DN;DN;DN;MN255: > Macro 2: MNO53;DN;DN;DN;UP;MN255: > Macro 1 sets the K3 to the mic connector on the front and Macro 2 sets the > input to Line In on the rear panel. > When I execute them, they come up to the display and I have to rotate the > dial to select the input. Previously, they just worked. > Any ideas? > Thanks. > Larry, KN8N > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lightweight headset/mic solution for KX3?
I use an iPhone headset for my KX3 all the time. No problems. Of course, don’t use a mic at all, just my Begali Magnetic Classic paddle and it plugs into the KX3 just fine. Just real fine. I mean really fine. 73, phil, K7PEH > On Dec 16, 2015, at 7:24 PM, Wayne Burdickwrote: > > I've used the iPhone headset, but it does require an adapter. So far I > haven't found an adapter that I like; they seem to be fragile or have a > too-loose connection. > > What I'm hoping to find is something like the iPhone headset but with two > plugs (one for the headphone jack, one for the mic jack). The Logitech H165 > fits the requirements but is very expensive. > > Wayne > N6KR > > On Dec 16, 2015, at 7:18 PM, "J.K. Hooper" wrote: > >> Wayne, >> >> Sounds like you use an iPhone-like earbud w/mic with your KX3. Whose >> adapter cable do you use and what KX3 mic settings? >> >> 73, >> Hoop >> K9QJS >> >> >> >> On Dec 16, 2015, at 18:29 , Wayne Burdick wrote: >> >> Hi all, >> >> Awhile back, Bill, KT5W, recommended the Logitech H165 "notebook headset" as >> a decent stereo earbud+mic solution for ultraportable operation. The H165 >> has two 3.5-mm stereo plugs -- one for the headphone jack, one for the mic >> jack -- some noise filtering, and a mute switch. It would appear to be ideal >> for this application. >> >> The one catch is that it's a bit pricey. >> >> Anyone find a good alternative? For my minimalist go-bag, I'd like to stick >> with this earbuds-plus-mic-on-cable form-factor. Large ear pieces won't fit. >> >> Thanks, >> >> Wayne >> N6KR > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to phys...@mac.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIOB
Hi Fred, No financial interest but one of the best sources I know of for cables is here: http://www.l-com.com/ If I have to "shorten" cables I fold them back on themselves and use wire ties to bundle that up. Can dramatically reduce clutter and or Rats Nests. 73, Bob K2TK ex KN2TKR (1956) & K2TKR On 12/16/2015 7:49 PM, Fred Jensen wrote: Hmmm ... a big problem for me is that cables seem to come in lengths that are almost universally too long. I have a Wi-Fi dongle on top of the RemoteRig box with a 6 ft [1.83 m] Cat5 cable connecting it to the RR box, all of 1 inch [2.54 cm] below it. Sadly an RJ-45 crimper is expensive and I'd use it a few times, probably all in one day, and never again. The "USB" cable from the wall wart that powers the dongle is also 6 ft [1.83 m] long. It only needs to be 6 in [15.24 cm] long. Nick of Pignology made me a short flat cable from the PigKnob interface to the K3 right below it, replacing about 8 ft [2.44 m]. I wonder if there is a market out there, every contemporary ham station I've seen gives lie to the term "wireless." 73, Fred K6DGW - Northern California Contest Club - CU in the Cal QSO Party 1-2 Oct 2016 - www.cqp.org On 12/16/2015 4:10 PM, Don Wilhelm wrote: In the "olden days", we did not have such clutter. If one is willing to do paper logging, there is no need for a computer connection and if we stick to SSB and CW, we only need a microphone and a key - KISS principle, and no extra cables except for the mic and key cables. Problem is that we 'want it all', and so the cable clutter expands without bounds as each additional device is introduced. I am planning a new operating desk that can be pulled away from the wall so I can access the rear of the equipment and hopefully keep those 'extra' cables neat and tidy. It may be a while before that is realized. 73, Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@att.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Lightweight headset/mic solution for KX3?
Hi all, Awhile back, Bill, KT5W, recommended the Logitech H165 "notebook headset" as a decent stereo earbud+mic solution for ultraportable operation. The H165 has two 3.5-mm stereo plugs -- one for the headphone jack, one for the mic jack -- some noise filtering, and a mute switch. It would appear to be ideal for this application. The one catch is that it's a bit pricey. Anyone find a good alternative? For my minimalist go-bag, I'd like to stick with this earbuds-plus-mic-on-cable form-factor. Large ear pieces won't fit. Thanks, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [KX3] Lightweight headset/mic solution for KX3?
Heck, while we're at it: Could the H165's mute switch be modified for PTT? :) Wayne On Dec 16, 2015, at 6:29 PM, "Wayne Burdick n...@elecraft.com [KX3]"wrote: > Hi all, > > Awhile back, Bill, KT5W, recommended the Logitech H165 "notebook headset" as > a decent stereo earbud+mic solution for ultraportable operation. The H165 has > two 3.5-mm stereo plugs -- one for the headphone jack, one for the mic jack > -- some noise filtering, and a mute switch. It would appear to be ideal for > this application. > > The one catch is that it's a bit pricey. > > Anyone find a good alternative? For my minimalist go-bag, I'd like to stick > with this earbuds-plus-mic-on-cable form-factor. Large ear pieces won't fit. > > Thanks, > > Wayne > N6KR > > __._,_.___ > Posted by: Wayne Burdick > Reply via web post•Reply to sender > •Reply to group • Start > a New Topic • Messages in this topic (1) > > VISIT YOUR GROUP New Members 14 > • Privacy • Unsubscribe • Terms of Use > . > > > __,_._,___ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lightweight headset/mic solution for KX3?
Wayne, Sounds like you use an iPhone-like earbud w/mic with your KX3. Whose adapter cable do you use and what KX3 mic settings? 73, Hoop K9QJS On Dec 16, 2015, at 18:29 , Wayne Burdickwrote: Hi all, Awhile back, Bill, KT5W, recommended the Logitech H165 "notebook headset" as a decent stereo earbud+mic solution for ultraportable operation. The H165 has two 3.5-mm stereo plugs -- one for the headphone jack, one for the mic jack -- some noise filtering, and a mute switch. It would appear to be ideal for this application. The one catch is that it's a bit pricey. Anyone find a good alternative? For my minimalist go-bag, I'd like to stick with this earbuds-plus-mic-on-cable form-factor. Large ear pieces won't fit. Thanks, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jkhoo...@rockisland.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 Hand microphone
The Kenwood MC-43 gives much better audio quality than the MH2 on my K2. Martin Storli LA8OKAOslo, Norway ARCTICPEAK's Radio pages! http://www.arcticpeak.com/radio.htm Fra: Aaron ScottTil: elecraft@mailman.qth.net Sendt: Tirsdag, 15. desember 2015 20.30 Emne: [Elecraft] K2 Hand microphone I need to get a hand microphone for my K2 and I have hear great things about the Elecraft K2 MH2 and Kenwood MC43S. Which seems to be the better microphone? Thank you Aaron Scott K5ATG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net/ Please help support this email list: http://www.qsl.net/donate.html Message delivered to arcticp...@yahoo.no __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B
You need raw material and labor to come together at the same time to build ANYTHING. Henry Ford proved that some years ago. It could be cash flow, marketing strategy, or other business reasons. Jim W6AIM Original message From: Merv SchweigertDate: 12/15/2015 6:15 PM (GMT-08:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KIO3B Im sure they will come in some due time.. What is strange for some of us outsiders is the logic We will have boards when the K3S demand is met? sounds like there is not enough money to buy more boards than what they expect K3S sales to be? Ordering another few hundred extra of the boards would solve the problem of not having enough on hand. Or is the supplier that slow? Can they only provide a few boards a week? Seems the K3 was funded partially by guys paying up front and having a 6 month wait when this started years back, I assume a lot of those are still around and willing to pay up front if money is that short now. Stretching some of this stuff out for a year or more does not help business, only the most dedicated go for that idea. Perhaps its a labor shortage/paying for more labor, cant sell them yet as no instructions written, or "testing" done? Seems there are a number of guys willing to help out on that end. So all the quiet and non fulfilled talk is just that, talk, just being honest and frank about whats up and why its not available would put to rest the speculation and angst that silence brews. Not criticizing, just wondering, I need a couple and keep putting off installing KYSN3 boards in one radio, its been apart for so many mods the screws are wearing out, had to replace them to keep it decent looking. Had chipped off the black. Which reminds me on another thing, I have had lots of knobs crack on the K3 Elecraft has been super at replacing them, the last ones I got have a metal insert and will never crack I assume, but they are butt ugly, instead of semi shiny black knobs, they are a dull black material that looks like something that came on some military piece of junk. Not even a close match to the other knobs. Wazzup with this deal... 73 Merv K9FD/KH6 Jerry, > > You are correct, I am not going to speculate other than to say "it > will happen sometime", but that may not be the end of this year as was > projected back at Dayton in May 2015. > I have no idea when that 'sometime' is because I have no information > about the production capability of the board house supplying Elecraft > with the KIO3B vs. the number of K3S units being ordered and shipped. > > When there are enough in house to supply both the K3S and the expected > deluge of orders anticipated for K3 upgrades, then you will see the > KIO3B offered for K3 upgrades. > > "The best laid plans of mice and men often go astray". > > 73, > Don W3FPR > > On 12/15/2015 7:50 PM, Jerry wrote: >> Nice try guys but I don't think you are going to suck Don in on this >> one >> >> Best regards, >> >> Jerry >> W1IE >> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k...@flex.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jbol...@outlook.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B
I am certain the money is not the problem - at least for Elecraft, but perhaps for their board house. The boards are being populated by a board assembly house in California. In order to increase their production of the finished boards, they would likely have to hire more people and purchase more equipment. That is not a smart business move if the volume will taper off after the "crunch". So we have to wait until things 'even out' before those boards can be available for K3 retrofit. If a cookie manufacturer has capability of producing 100k cookies a day, but the holiday season customers want 125k cookies per day, do you think the manufacturer would increase the production facilities - especially if the demand would fall off to only 100k per day after the holidays? It is the same principle. I am quite happy with the RS-232 interface for my K3 and already have the external soundcard working, so I will not be begging to get the schedule advanced. 73, Don W3FPR Original message From: Merv SchweigertDate: 12/15/2015 6:15 PM (GMT-08:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KIO3B <> We will have boards when the K3S demand is met? sounds like there is not enough money to buy more boards than what they expect K3S sales to be? Ordering another few hundred extra of the boards would solve the problem of not having enough on hand. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B
I feel a bit responsible for this thread and it needs to end. The issue for me is that my radio is at my place on J6 where my electronics lab is not. I have three options: 1. Bring the radio back and fix it, 2. Try to fix it down there (with very minimal resources), or 3. Bring a new part down with me to swap out and trouble shoot the broken part back here in the states. Ordering a new KIO3 would be less than smart. I decided last night i would simply order a new K3s, tell Elecraft to hot shot the KIO3B out of it and keep the radio/ send the radio with a replacement KIO3B when they become available (months from now, i don't care). Theres more than one way to skin this cat! Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa Grand Piton - J68HZ Soufriere, St. Lucia W.I. Rent it: www.VillaGrandPiton.com email: b...@wjschmidt.com > On Dec 16, 2015, at 9:08 AM, Don Wilhelmwrote: > > I am certain the money is not the problem - at least for Elecraft, but > perhaps for their board house. > The boards are being populated by a board assembly house in California. > In order to increase their production of the finished boards, they would > likely have to hire more people and purchase more equipment. > That is not a smart business move if the volume will taper off after the > "crunch". > So we have to wait until things 'even out' before those boards can be > available for K3 retrofit. > > If a cookie manufacturer has capability of producing 100k cookies a day, but > the holiday season customers want 125k cookies per day, do you think the > manufacturer would increase the production facilities - especially if the > demand would fall off to only 100k per day after the holidays? It is the > same principle. > > I am quite happy with the RS-232 interface for my K3 and already have the > external soundcard working, so I will not be begging to get the schedule > advanced. > > 73, > Don W3FPR > > >> Original message >> From: Merv Schweigert >> Date: 12/15/2015 6:15 PM (GMT-08:00) >> To: elecraft@mailman.qth.net >> Subject: Re: [Elecraft] KIO3B >> > <> >> We will have boards when the K3S demand is met? sounds like there is not >> enough money to buy more boards than what they expect K3S sales to be? >> Ordering another few hundred extra of the boards would solve the problem >> of not >> having enough on hand. > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to b...@wjschmidt.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com