Re: [Elecraft] SSB list lacking

[Josh Fiden]

I think that was sarcasm. 

73
Josh W6XU 

Sent from my mobile device

> On Sep 29, 2021, at 9:07 AM, Julia Tuttle  wrote:
> 
> Would it kill either of you to cut your fellow ham a little slack? We're
> not talking about an essential piece of emergency communications, we're
> talking about a list of folks who checked in to a social net.
> 
>> On Wed, Sep 29, 2021, 11:50 Steve Hall <99sun...@gmail.com> wrote:
>> 
>> There is no excuse for not being included in the forum email list as you
>> noticed.  If I were you, I would not waste my time checking into this net
>> in the future.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA100/KAT100 EC2 Combo to ICOM 705

[kd4iz]

Robin,

I second Don's comments. To add, have been using my KXPA100AT with the 705 and 
have found it simple and trouble free. I know of quite a few other who do the 
same. Good discussions of that on ic-...@groups.io list.

Jack - KD4IZ

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Don Wilhelm
Sent: Wednesday, September 29, 2021 11:48
To: Robin Tew ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA100/KAT100 EC2 Combo to ICOM 705

Robin,

That will not work.  The KPA100 depends on internal signals from the base K2 
such as AUXBUS and several other signals to operate and control power output.  
In other words, it is an amplifier dedicated to the K2 and not a general 
purpose amplifier.

The KXPA100 and KXAT100 would serve you better than cobbling up an interface 
that would be quite complex.

he signals needed are those in the 9 pin AUX IO connector.  AUXBUS allows the 
base K2 firmware to 'talk' to the KPA100 firmware IC as well as the KAT100 
firmware.

73,
Don W3FPR

On 9/29/2021 10:59 AM, Robin Tew wrote:
> Hi All
> Just thinking about using the KPA100/KAT100 EC2 Combo with the Icom 705.
>
> Any pointers,ideas,tips etc. To achieve this?.
> Many thanks
> Robin G4JDO
>
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to kd...@frawg.org 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] SSB list lacking

[Julia Tuttle]

Would it kill either of you to cut your fellow ham a little slack? We're
not talking about an essential piece of emergency communications, we're
talking about a list of folks who checked in to a social net.

On Wed, Sep 29, 2021, 11:50 Steve Hall <99sun...@gmail.com> wrote:

>  There is no excuse for not being included in the forum email list as you
> noticed.  If I were you, I would not waste my time checking into this net
> in the future.
> --
>
> Message: 2
> Date: Thu, 23 Sep 2021 19:19:58 -0400
> From: Hunsdon Cary III 
> To: ela...@sbcglobal.net
> Cc: Elecraft Mailman 
> Subject: [Elecraft] SSB list lacking
> Message-ID: <6c3fa921-33fa-4fd5-940a-4f1aaba62...@gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> Come on - I checked into the Elecraft SSB Net on Sunday and I know I was
> acknowledged!
> If you are going to send out a partial list , don?t
> K4TM
> Cary
> K2-100 # 7450 and KPA #0380
>
> Sent from Clovelly Cottage II, home of amateur radio station K4TM and the
> most creative Sue Cary, in the foothills of the beautiful Blue Ridge
> mountains of Virginia.
>
> --
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ju...@juliatuttle.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] SSB list lacking

[Steve Hall]

 There is no excuse for not being included in the forum email list as you
noticed.  If I were you, I would not waste my time checking into this net
in the future.
--

Message: 2
Date: Thu, 23 Sep 2021 19:19:58 -0400
From: Hunsdon Cary III 
To: ela...@sbcglobal.net
Cc: Elecraft Mailman 
Subject: [Elecraft] SSB list lacking
Message-ID: <6c3fa921-33fa-4fd5-940a-4f1aaba62...@gmail.com>
Content-Type: text/plain; charset=utf-8

Come on - I checked into the Elecraft SSB Net on Sunday and I know I was
acknowledged!
If you are going to send out a partial list , don?t
K4TM
Cary
K2-100 # 7450 and KPA #0380

Sent from Clovelly Cottage II, home of amateur radio station K4TM and the
most creative Sue Cary, in the foothills of the beautiful Blue Ridge
mountains of Virginia.

--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA100/KAT100 EC2 Combo to ICOM 705

[Don Wilhelm]

Robin,

That will not work.  The KPA100 depends on internal signals from the 
base K2 such as AUXBUS and several other signals to operate and control 
power output.  In other words, it is an amplifier dedicated to the K2 
and not a general purpose amplifier.


The KXPA100 and KXAT100 would serve you better than cobbling up an 
interface that would be quite complex.


he signals needed are those in the 9 pin AUX IO connector.  AUXBUS 
allows the base K2 firmware to 'talk' to the KPA100 firmware IC as well 
as the KAT100 firmware.


73,
Don W3FPR

On 9/29/2021 10:59 AM, Robin Tew wrote:

Hi All
Just thinking about using the KPA100/KAT100 EC2 Combo with the Icom 705.

Any pointers,ideas,tips etc. To achieve this?.
Many thanks
Robin G4JDO




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA100/KAT100 EC2 Combo to ICOM 705

[Robin Tew]

Hi All
Just thinking about using the KPA100/KAT100 EC2 Combo with the Icom 705.

Any pointers,ideas,tips etc. To achieve this?.
Many thanks
Robin G4JDO

Sent from Mail for Windows

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and KPA1500

[Keith Ennis via Elecraft]

Sale! Only $99.99! each.

Keith Ennis, KV5J

www.kv5j.com/store






On Saturday, September 18, 2021, 09:54:58 AM CDT, Keith Ennis 
 wrote: 





KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and 
KPA1500
-
Digital Display Unit for Elecraft's W2 Watt Meter:
The digital read out on the Display Unit takes the guess work out of the LED 
light bars.
-
Digital Display Unit for Elecraft's KXPA100 amplifier:
-
Don't wait for a fault light to come on.  Keep an eye on 5 crucial readings at 
all times.

1. Power amplifier's heat sink temperature
2. Power amplifier's high voltage supply voltage
3. Power amplifier's current
4. Power amplifier's output power
5. SWR that the KXPA100 sees at its output
-
-
Digital Display Unit for Elecraft's KPA500 amplifier:
-
Instead of seeing only 1 crucial reading, monitor all 7 at the same time.
-
1. Power amplifier's heat sink temperature
2. Power amplifier's high voltage supply voltage
3. Power amplifier's current
4. Power amplifier's output power
5. SWR that the KPA500 sees at its output
6. Displays Operate/Standby mode
7. Displays Band amp is tuned to
-
Digital Display Unit for KAT500:
-
This unit displays the front panel settings.
If the tuner is in bypass or not.
Displays the capacitance and inductance used.
What type of circuit is used. LC or CL.
SWR of both before and after a tune cycle is completed.
-
-
Digital Display Unit for Elecraft's KPA1500 amplifier:

Displays the same display that is on the KPA1500 Amplifier 
Change the display on the KPA1500 and the display changes to show this same 
screen
-
-
All of the Digital Display Units:
-
Display Unit can be located at a more visible location
Up to the RS232 limit from unit
-
Easy to read 2 line display
No USB or serial cable to computer
No com port in Windows to manage
No computer needed
Plug and Play
Simply connect the SUPPLIED dc power cable (with inline on/off switch) from the 
DDU to power supply and SUPPLIED  SERIAL data jumper cable to the device

Retains all functions of the front panel

All displayed info obtained directly from the device
-
Only 4" x 4" x 2"
-
For more information and ordering go to:   http://www.kv5j.com/store

Reviews:

https://www.eham.net/reviews/view-product?id=14701
-
https://www.eham.net/reviews/view-product?id=14820


Keith, KV5J
http://www.kv5j.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com