Hi Brian and all. I have an old pair of Kenwood HS5 headphones and plugged
them in to my factory assembled K3 after donning them. Had to back the AF
gain back by about 10% for comfortable listening. I have a question that
someone out there with an Elecraft/Heil MD2 mic may be able to help with. I
bought it second hand and the previous owner had re-wired to suit Icom. I
now wish to use it on my K3 and would like to get the wire color code or
find out which color wire the +8v goes to. I e-mailed Heil but they can't or
won't tell me. Can any one with an MD2 give me the pin outs by color
pllease? John Cl;are VK1CJ.
- Original Message -
From: Brian Alsop [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Tuesday, July 15, 2008 3:45 AM
Subject: Re: [Elecraft] K3 audio output v headphone sensitiviy
From the K3 manual page 20
Sterero or Mono 16 ohm min. recommended
32 ohm earphones are quite common. Not surprising 16 ohms is the
paralleled configuration of the two 32 ohm individual ear sides for mono.
I first ran into 32 ohm earphones for an FT1000MP.
73 de Brian/K3KO
WILLIS COOKE wrote:
I have not heard of 32 ohm impedance headphones. The
DC resistance is not the impedance, but a 600 ohm pair
might have 32 ohms resistance measured with an ohm
meter. Of course, I don't know what the British
military used. The US used 600 ohm.
Measuring several headsets resistance of the headsets
in my shack shows all kinds of resistances. Some
Realistic (Radio Shack) stereo 8 ohms show 9 ohms with
the stereo speakers wired in parallel. A Sony Walkman
stereo headset measures 30 ohms on each speaker. A
Heil BM10 measures 32 ohms for each speaker. A Heil
Pro-Set shows 215 Ohms on each speaker. A Telex Model
A610-1 Military Surplus mono headset labeled 600 ohms
measures 285 ohms. A Telex A1210 mono headset to FAA
Spec TSO C57 measures 615 ohms. All of them work OK
with my TS-850 without major audio gain adjustments
from the speaker.
Cookie, K5EWJ
--- David Cutter [EMAIL PROTECTED] wrote:
They are 32ohm: don't know if the ear pieces are
wired in series or parallel. Didn't observe the manufacturer, but I'll
get back to them in a couple of days and let you know.
David
G3UNA
- Original Message -
From: WILLIS COOKE [EMAIL PROTECTED]
To: David Cutter [EMAIL PROTECTED]
Sent: Monday, July 14, 2008 5:26 PM
Subject: Re: [Elecraft] K3 audio output v headphone
sensitiviy
The aircraft headphones are probably 600 ohm
impedance. Most ham headphones are 8 ohms.
--- David Cutter [EMAIL PROTECTED] wrote:
It has recently astonished me just how deaf some
headphones are. In my work
I was given aircraft headphones that needed 2W to
get the same audio output
as our own make that needed about 20mW. That
quick
test with the spl meter
needs to be repeated on a calibrated jig and I'll
be
taking my ham phones in
to get them checked. I'll post the results here.
David
G3UNA
- Original Message -
From: Jim Brown [EMAIL PROTECTED]
To: Elecraft Reflector
elecraft@mailman.qth.net
Sent: Monday, July 14, 2008 8:01 AM
Subject: Re: Re: [Elecraft] K3 #1037 in IARU
contest
On Sun, 13 Jul 2008 16:49:25 -0700, Fred Jensen
wrote:
Slightly different subject, I wouldn't mind at
all
if the K3 had more
audio available in the headfones from both the
monitor and sidetone.
Fred,
There's an AF Gain setting in the Config Menu.
Check that it's set to
HI. If you need more, maybe I can help you
find
headphones with higher
voltage sensitivity.
Jim
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
No virus found in this incoming message.
Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database:
270.4.10/1550 - Release Date: 7/13/2008 5:58 PM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
