Don
Thanks for the response.
Yes, I found it very frustrating that Heil does not document their wiring.
yes for the Proset -IC the Bias is turned on.
I tried E-mail to Heil but got no answer.
Your idea on a blocking cap could explain what I am seeing.
I think I might ring out the adapter to see if it is using the bias in pin 5.
Larry K6PJ
On Fri, 21 May 2010 09:34:37 -0400
Don Wilhelm w3...@embarqmail.com wrote:
Actually, this sounds like a question that should be answered by Heilsound.
You may have a non-working microphone or you my have an adapter that will
not work with the K3.
Both the ProSet-iC and the HandiMic-iC should need bias if I recall
correctly.
The K3 provides bias on the AF pin, and that Kenwood cable may include a
blocking capacitor (which would render the K3 bias ineffective) and depend on
the voltage at Kenwood pin 5 to power the element (the K3 has voltage on pin
6).
What I am saying is that only Heil can provide the right answer - they do
not publicize the schematics for their adapters and cables.
Unfortunately, HeilSound in the past has stated that Elecraft is the SAME as
Kenwood, but actually it is not the same - it is compatible but that does
not make them equal.
The difference is in the use of pins 5 and 6 on the mic connector. Elecraft
uses pin 6 for 8 volts, Kenwood uses pin 5 for 8 volts.
Bottom line - any mic (or adapter cable) that depends on the Kenwood pin 5
voltage will not work with the Elecraft pinout. As one for instance, the
Kenwood MC-85 microphone will not work with the K3 for this very reason.
73,
Don W3FPR
Mike wrote:
Larry,
See if this is it. The K3 uses the same connections as Kenwood.
http://homepage.ntlworld.com/rg4wpw/date.html#kenwood
73, Mike NF4L
K6PJ wrote:
I have used the HEIL Proset with the IC microphone since I buught my K3 with
excellent results.
I decided I wanted a desk Mike so I thought the HEIL Handie Mic IC should
give me similar results.
So I bought a Handi Mic IC and CC1K cable. I get no audio into the K3 with
this combination.
Is anyone using this combination with the K3?
Should it work?
Does anyone know the wiring of the 4 pin connector on the Handi Mic IC?
I cannot find it on the Heil web site.
73 Thank You
Larry K6PJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html