[Elecraft] K3 Stations for sale.
I am putting both of my Elecraft complete K3 line stations up for sale.Each station includes the following: K3 transceiver, KPA500 Amplifier, KAT500 Antenna Tuner, P3 Panadapter with monitor and Navigator interface.All as current photograph on my QRZ.com page. Details of both stations as below. They are in a non-smoking environment. Station 1. K3 Transceiver, serial # 00684, firmware version 5.67.100 Watt amp installed. Full 100 watts out on all bands. Sub receiver installed.100 Watt tuner installed.K312 MDKT upgrade to provide 1.0 amp 12V power output. (Required if P3 SVGA graphics option is to be used).No microphone, I always used headset mic.KUSB PCX 0250 firmware cable included.Fred Cady K3 second edition manual, included.Filters installed; Main Rx. Sub Rx. 1 2.7 2.72 1.8 - 3 0.5 -4 0.50 0.505 0.20 0.20 When I first obtained this radio in 2014 I sent it to Elecraft to check it over. They did some upgrades to it but I can't find the record of what they did.Have never had any reason to open it up and look. Cost then about $800. Has no known problems, is still in regular use. $1800 plus shipping. KPA500 Amplifier, serial #2416, firmware version 1.54. Tested today into 50 Ohm dummy load to achieve 500 watts out. Band. (MHz). Drive Pwr. 1.8 25 3.5 407 2614 3021 2728 225 Max 100 watts allowed this band.10 10 ` 30 (into dummy load)18 2724 2650 26No known problems, still in regular use. Manual included.$1800 plus shipping. KAT500 Antenna tuner, serial # 1601, firmware version 1.75. Including KXUSB PCX 0151 data to computer cable. Including 12V power supply cable.Manual included.No known problems, still in regular use. $700 plus shipping. Elecraft P3 panadapter, serial # 3613, firmware version 1.60.SVGA graphics option installed. Including Acer 20 inch monitor, K3 connection cable, power cables and manual.No known problems, still in regular use. $700 plus shipping. Navigator modem. Black face, pre Timewave model. Including cables to connect to K3. Installation and operation page on Timewave website. Still in regular use.$180 plus shipping. I will sell the entire package for $4600 plus shipping. Station 2. K3 Transciver, serial # 5087, firmware version 5.67.KAT/100-F amp installed.KAT3-F 100 watt ATU tuner installedKXV3A RX out, IF Out and Xverter interface installed.Main receiver filters installed 2.70, 0.40 8 pole, 0.20 5 pole. Digital voice recorder installed. KBPF3 general coverage RX module installed.KSYN3A Upgrade installed.Elecraft MH4 hand mic included.KUSB firmware cable included.12 V DC 1.0 amp power out upgrade installed (required if P3 SVGA graphics option is to be used).Fred Cady K3 manual on CD included.RF Bar display shows 90 watts out on 6 meters (no apparent reason), all other bands 100 watts output. 29 Watts out from the K3 on 6 meters drives the KPA500 amp to 500 watts out easily.No known problems, still in regular use. $1900 plus shipping. KPA500 Amplifier, serial # 1522, firmware version 1.54.Tested today into 50 ohm dummy load to achieve 500 watts out.Band (MHz). Drive Pwr. 1.8 203.5 207 2514 3021 2728 215 Max 100 watts allowed on this band.10 30 (into dummy load).18 2624 2550 29No known problems, still in regular use, manual included.$1800 plus shipping. Kat500 Antenna tuner, serial # 1510, firmware 1.75.Includes KXUSB PCX 0151 data to computer cable and 12v DC power supply cable.Manual included.No known problems, still in regular use.$700 plus shipping. Elecraft P3 panadapter, serial # 2001, firmware version 1.60P3 SVGA graphics option installed. K3 connection cables included.Acer 19 inch monitor and cables included.Manual included.No known problems, still in regular use.$700 plus shipping. Navigator modem.Older silver face model. Including cables to connect to K3.Installation and operation manual on Timewave website.No known problems, still in regular use.$150 plus shipping. I will sell the entire package for $4700 plus shipping. I would give preference to selling each of the entire packages rather than individual items, and would like to sell to a local purchaser in South Mississippi to avoid shipping costs or damage.Serious purchaser is very welcome to come to my shack and operate the equipment in its
[Elecraft] KPA 500 6meter power out.
I have had this problem for some time but as I almost never use 6 meters it has not really concerned me. I have two identical K Line stations, K3's, KAT 500's, KPA 500's and P3's. On station #1 everything works as it should and if I put 25 watts into the KPA 500 I get 500+ watts out. On station #2 if I put 30 watts into the KPA 500 I get 350 out and if I increase the input to 32 watts the KPA 500 momentarily shows 400 watts out and immediately trips the amp and shows the PA DISS fault. It works fine on all other bands putting out 500 watts with nominal drive power. If I then swop the KPA 500's over without changing any antennas or radio settings (so nothing except the amps has changed), the fault moves with the amp and the good amp continues to be good on the other station. My questions: What is wrong with the faulty amp and what do I need to do to fix it? Many thanks for reading. Mike, WM5DX. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Headphones.
I bought the Yamaha phones a couple of years ago. They were fine for a while but the microphone was very loose and kept getting in the way and then the foam earpiece covering all fell apart. So, when I thought about it, it occurred to me that the younger generation that does a lot of gaming for hours on end must need something that worked well and are comfortable for long periods. I did a little research and then bought a "Pro Gamer" headset HyperX Cloud. Not as cheap as the Yamaha but not as pricey as Heil. (I've had Heil headsets over the years and never been really happy with them). The real clincher was that the HyperX has a detachable microphone so now I have something to stir my tea with. (The only use I have for it). I am very pleased, they seem to perform well with the K3 and I find them durable and comfortable. But, as someone else said, every person is different. 73, Mike, WM5DX. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB Elecraft KPA 500 Amp.
I am looking to buy an Elecraft KPA 500 amplifier. Needs to be in good condition and perfect working order. Please contact me at with info and asking price. Thanks for reading, Mike, WM5DX. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Fw: KPA 500 HV Problem.
- Forwarded Message - From: Mike Streeter To: elecraft@mailman.qth.net Sent: Tuesday, April 30, 2019 02:50:12 PM CDTSubject: KPA 500 HV Problem. My KPA 500 has been running ok for several years on 120 Volts. Today I turned it off on the back , unplugged it and opened the top because I thought I might need to change the voltage tap. I did not need to change it. I replaced the top cover, plugged it in and turned it on at the back. All ok, but when I turned it on with the front panel button the HV reads .1 in standby. If I tap OPER it shows a hard fault and "270V error" .The Manual says this is a 270V supply failure and to recycle the mains power KPA 500 after it is corrected. I tried recycling the power but still faults. I don't have any 270V power from the mains, if I did it would be 240ish, not 270. The fuse block on the back is set to 115V.Any advice would be welcome.Mike, WM5DX. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Fw: KPA500 Power out query.
- Forwarded Message - From: Mike StreeterTo: elecraft...@yahoogroups.com Sent: Saturday, January 27, 2018 12:04:40 PM CSTSubject: KPA500 Power out query. I am driving my KPA500 with my K3 to a Mosley PRO 67. On every band except 20 meters 25 watts out from the K3 will give me at least 500 watts out of the amplifier. On 20 meters I get 450 watts out with 25 watts drive but no increase even if I go to 40 watts out from the K3. I have put a dummy load on the K3 using the usual RG 213 and the SWR is 1:1, and I have checked the antenna with an MFJ 259, using the usual RG 213 cable and it is 1:1 at 14.000 up to 1.4:1 at 14.350.I have loaded the latest firmware to both the K3 and the KPA. I realize that the difference between 450 and 500 watts is negligible but it bugs me that it is not giving me full power out on 20.Anyone have any ideas as to how to fix it?Many thanks, Mike, WM5DX. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com