[Elecraft] Antenna 2
Thanks for the replies. Hadn't thought of its use for sub rx or dummy load. I have grounded out the connector with a plug hooked directly to the receiver grounding terminal. Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Antenna 2
Hi all, When messing around today with antennas, I had my aerial connected only to Ant 1 and discovered that when selected, Ant 2 was capable of receiving signals with no antenna connected to it, albeit at a much reduced signal. I would have thought the unused port would have been earthed out?? Paul -- Paul Ormandy ZL4TT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA5
Hi all, Just calling FT4TA on 20m RTTY at about 500W, heard a loud crack from the KPA500, now not amplifying. Still powers up and passes RF thru from the rig but no amplification. No smell of burnt silicon either, which is a good sign I guess! There was no Hi Input or Hi Refl Pwr warnings... same all bands so assume not in LPF section. Going back to work soon (am on a lunch break) so would appreciate advice what to look for. Cheers, Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] External sound cards
Hi all, Have purchased a new Win 7 laptop and have discovered that my much loved Tascam US-122 midi interface/external sound card will not work as it is obsolete and Tascam never produced a Win 7 driver for that model. So I am seeking a very good external USB sound card, preferably USB 3.0 and its essential that it has good EMI/RFI handling, i.e. not a cheap and cheerful type! Any recommendations??? Cheers, Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Key Out Issue
Hi all, Am hoping someone can help me with a problem. I have a K3 with a KD9SV rx antenna switch and use the Key Out line to toggle this device. For some reason, the K3 will not send the key Out low in CW mode via: - external software (Logger32, N1MM) - the macro buttons - a paddle plugged in the rear port It won't send it low using any software-oriented mode, e.g. voice keyer or MMVARI either. However, it does send it low when PTT is activated, i.e. by a footswitch, and will do so when the K3 is in CW mode as well as SSB so in the meantime I can toggle the rx ant switch with the footswitch. So it seems the cabling and MOSFET controlling the Key Out lien are functioning correctly. Have just downloaded the latest firmware, the latest firmware installer and the problem persists. I have tried EEINIT prior to reloading the complete firmware, tried loading older configurations etc... My set-up is K3/KPA500/KAT500 connected via the serial cables for control and keying. I ahve tried disconnecting all external equipment save the rx ant switch and used the M1-M4 macros to generate code with VOX on and it still won't operate the Key Out line. Makes no difference if in VOX or QSK off/on or set PTT to OFF-OFF and use the paddle or M1-M4 macros. I have Cheers, Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Key Out issue
Hi all, Am hoping someone can help me with a problem. I have a K3 with a KD9SV rx antenna switch and use the Key Out line to toggle this device. For some reason, the K3 will not send the key Out low in CW mode via: - external software (Logger32, N1MM) - the macro buttons - a paddle plugged in the rear port It won't send it low using any software-oriented mode, e.g. voice keyer or MMVARI either. However, it does send it low when PTT is activated, i.e. by a footswitch, and will do so when the K3 is in CW mode as well as SSB so in the meantime I can toggle the rx ant switch with the footswitch. So it seems the cabling and MOSFET controlling the Key Out lien are functioning correctly. Have just downloaded the latest firmware, the latest firmware installer and the problem persists. I have tried EEINIT prior to reloading the complete firmware, tried loading older configurations etc... My usual set-up is K3/KPA500/KAT500 connected via the serial cables for control and keying. I have tried disconnecting all external equipment save the rx ant switch and used the M1-M4 macros to generate code with VOX on and it still won't operate the Key Out line. The KD9SV box also has a rig-saver interface, this is not connected to the amp. Makes no difference if in VOX or QSK off/on or set PTT to OFF-OFF and use the paddle or M1-M4 macros. I have Cheers, Paul -- Paul Ormandy, ZL4PW, Oamaru, New Zealand http://www.zl4pw.orconhosting.net.nz/ www.radiodx.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] CW Machine issue???
Hi, I have a strange issue with the following set-up: K3/KPA500/KT500 connected with the serial cables for control and keying. I also have a KD9SV DXpedition II rx ant switch attached directly to the K3's Key Out for switching. For some reason, when TXing CW via Logger32's CW Machine, the Key Out is not working so the rx switch isn't switching back to the TX antenna as it should. This only happens on CW using the CW Machine. Having the VOX on or off makes no difference. The CW Machine is keying correctly thru the K3/KPA500/KAT500 combo. The CW Machine settings are : PTT on selected port Share radio serial port for CW But what I notice is that the check marks beside these settings are red... and I wonder what that is indicating??? Not sure if this is a software issue or a compatibility thing. Cheers, -- -- Paul Ormandy, ZL4PW, Oamaru, New Zealand http://www.zl4pw.orconhosting.net.nz/ www.radiodx.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KAT500 ports
Hi all, Maybe someone with computer nous than me can answer this. Just hooked up the KAT500 and went to configure with the utility. However, the utility is only showing ports 3 and 6 as available. Port 3 is where I have the K3 plugged in and the only spare port I have, which is on the end of a 4 way USB splitter, is apparently not port 6! The USB splitter is plugged into port 4, so I removed it and plugged the KAT500 cable into port 4, expecting the latter show as the available port, but it still only gave me the options of 3 or 6. I tried another port to no avail. Have read the help file tip about the manage facility on My Computer and see that the device does attach itself to port 6... which it cannot connect to. BTW, I have no idea which is physically port 6... Cheers, Paul -- Paul Ormandy, ZL4PW, Oamaru, New Zealand http://www.zl4pw.orconhosting.net.nz/ www.radiodx.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KAT500 ports
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Fwd: Re: KAT500 ports
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Internal keyer
Hi all, Just set up the internal keyer memories and they work accordingly, except they don't key the transmitter. Probably a simple solution that I've overlooked in the manual. Cheers, Paul -- Paul Ormandy, ZL4PW, Oamaru, New Zealand http://www.zl4pw.orconhosting.net.nz/ www.radiodx.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Speaker staying on
Hi all, The K3 has developed a curious fault since switching off yesterday, i.e the speaker stays on even with phones plugged into the front socket. Has not done this before and was working normally when it was switched off last evening. I simply turned it on this morning and encountered this unexpected result. Unplugging and plugging in the phones and re-booting the power made no difference. Any ideas? Cheers, Paul -- Paul Ormandy, ZL4PW, Oamaru, New Zealand http://www.zl4pw.orconhosting.net.nz/ www.radiodx.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] SPKR+PH fault
Hi all, Further to the earlier issue... i.e. my K3 is in SPKR+PH - On mode even though the rig says it is off. This only occurs thru the front speaker port. When I plugged the phones into the rear socket, the internal speaker cut out and I have the usual sound from the rig... I would still like to fix the front phone socket issue as it is much more convenient for me to revert to Speaker from that position. This curious behaviour occurred overnight... it was fine when switched off yesterday and appeared at switch-on today.. I did not access the menus for any reason. I wonder if a firmware re-install may correct it??? Cheers, Paul -- Paul Ormandy, ZL4PW, Oamaru, New Zealand http://www.zl4pw.orconhosting.net.nz/ www.radiodx.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA500 Heat Expansion Pop
Hi all, Also getting the pop here.. I thought it may be a thermal cut-out rather than a relay... fortunately, it doesn't affect how the KPA500 performs! Cheers, Paul On 9/12/2011 12:21 a.m., Dave Perry wrote: Yes, my KPA500 has been doing the same. Whenever I mention it here on the reflector, I get zero response. I cannot tell whether this is a problem or something that is normal. The pops are very frequent regardless of mode. Otherwise, the amp appears to function normally. Dave, N4QS - Original Message - From: Joe Wordjoe.n...@gmail.com To:elecraft@mailman.qth.net Sent: Thursday, December 08, 2011 11:37 AM Subject: [Elecraft] KPA500 Heat Expansion Pop My KPA500 has developed a heat expansion pop. When it heats up and then cools down I get a pop from inside the amp. It does this now every time I make a SSB transmission. Anyone else experience this? If so, any resolution? Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Paul Ormandy, ZL4PW, Oamaru, New Zealand http://www.zl4pw.orconhosting.net.nz/ www.radiodx.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 fusing and cable-colouring
Hi all, Started assembling the KPA500 last night and noticed the use of fuses for the AC supply. Unlike other parts of the world, we don't have individually fused socket outlets or plugs so I'll incorporate a small enclosure with flush fuse holders. Now, do I need to fuse both phase and neutral, and what are the correct colours? In New Zealand and Australia (and most of the Commonwealth) we use red for phase and black for neutral. Cheers, Paul -- Paul Ormandy, ZL4PW, Oamaru, New Zealand http://www.zl4pw.orconhosting.net.nz/ www.radiodx.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KAT500
Hi all, I wonder if any of the Elecraft team can let us know how many antenna ports the KAT500 will have and if they will be auto band-switching? If so, I'll abandon my plan to build a band-switching interface using the Top Ten decoder I have. Cheers, Paul -- Paul Ormandy ZL4PW ZM4M www.radiodx.com www.zl4pw.orcon.net.nz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 losing RF - problem solved
Hi all, I was less flustered today and did some more checking... Discovered the main fuse in the negative supply line from the PSU had blown. I would like to know what reason it could have blown and at this point, presume it was something to do with running 100W on 6M. Thanks to all who e-mailed directly with suggestions. Cheers, Paul *From:* Paul Ormandy ZL4PW zl...@orcon.net.nz *To:* elecraft@mailman.qth.net *Sent:* Sat, January 1, 2011 11:22:39 PM *Subject:* [Elecraft] K3 losing RF Hi all, My K3 has developed a problem... Power output is down to 70W and the LCD back-light flickers on tx. The Low Voltage message flicked up briefly once. I suspect a DC power problem but so saying, the voltage at the rig is 13.9V on transmit at 70W and the rig is drawing 13A. The problem seems worse on the 6mb. If I reduce the output RF control to around 60W, there is no perceptible LCD flickering. I will obtain another 20A power supply tomorrow and see if the problem persists. In the mean time, (apart from running low power), can anyone suggest what I should start looking for internally? Kind regards, Paul -- Paul Ormandy ZL4PW ZM4M www.radiodx.com http://www.radiodx.com/ www.zl4pw.orcon.net.nz http://www.zl4pw.orcon.net.nz/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Paul Ormandy ZL4PW ZM4M www.radiodx.com www.zl4pw.orcon.net.nz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 losing RF
Hi all, My K3 has developed a problem... Power output is down to 70W and the LCD back-light flickers on tx. The Low Voltage message flicked up briefly once. I suspect a DC power problem but so saying, the voltage at the rig is 13.9V on transmit at 70W and the rig is drawing 13A. The problem seems worse on the 6mb. If I reduce the output RF control to around 60W, there is no perceptible LCD flickering. I will obtain another 20A power supply tomorrow and see if the problem persists. In the mean time, (apart from running low power), can anyone suggest what I should start looking for internally? Kind regards, Paul -- Paul Ormandy ZL4PW ZM4M www.radiodx.com www.zl4pw.orcon.net.nz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 losing RF power
Hi all, More info... Was unaware of the power recommendations on 50MHz... I was running 100W calling CQ on 50MHz when the problem suddenly arose. Maybe running 100W on 6M has been the cause? If I dial up 100W on any band, RF power as indicated on the K3 display is 70W. I am unable to get more than 70W on any band... And running very latest software 4.22. Cheers, Paul Hi all, My K3 has developed a problem... Power output is down to 70W and the LCD back-light flickers on tx. The Low Voltage message flicked up briefly once. I suspect a DC power problem but so saying, the voltage at the rig is 13.9V on transmit at 70W and the rig is drawing 13A. The problem seems worse on the 6mb. If I reduce the output RF control to around 60W, there is no perceptible LCD flickering. I will obtain another 20A power supply tomorrow and see if the problem persists. In the mean time, (apart from running low power), can anyone suggest what I should start looking for internally? Kind regards, Paul -- Paul Ormandy ZL4PW ZM4M www.radiodx.com www.zl4pw.orcon.net.nz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Err 12V
Hi all, Yesterday, the K3 threw up the Err 12V error and bypassed the KPA3 module. The circuit breaker didn't pop and I was able to power off and increase the power back up. This was happening on PSK with 50W and RTTY with 100W. I have yet to try digi modes in anger again today without first getting some feedback. I had close to zero AGC/compression when this occurred. Any suggestions will be most welcome. Regards, Paul -- Paul Ormandy ZL4PW ZM4M www.radiodx.com www.zl4pw.orcon.net.nz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Top Ten Devices band decoder interfacing
Hi all, Problem solved! Thanks to Dave N3RD. Cheers, Paul -- Paul Ormandy ZL4PW ZM4M www.radiodx.com www.zl4pw.orcon.net.nz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Top Ten Devices band decoder interfacing
Hi all, Have purchased a Top Ten Devices band decoder and am about to build a cable to connect it to the K3. Can someone please tell me if the band switching matrix is as follows? Band A - Band 0 Band B - Band 1 Band C - Band 2 Band D - Band 3 Thanks in advance, Cheers, Paul -- Paul Ormandy ZL4PW ZM4M www.radiodx.com www.zl4pw.orcon.net.nz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 and the IC-2KL/AT-500
Hi all, Hopefully, I will soon purchase an IC-2KL/AT-500 combo for use with the K3. I understand that to automatically band-switch I need an interface that emulates the CI-V. It would appear that most modern band-decoders don't provide the analogue voltages required and there is W9XT's BCD-10 but it requires a parallel port to drive it... I use a laptop so that is an issue! If anyone is aware of an interface device (apparently someone has homebrewed one) I would appreciate knowing the details. Maybe the Elecraft KRC2 is the answer??? I ma not that concerned about the negative ALC mod at this stage. Cheers, Paul -- ZL4PW ZM4M www.radiodx.com www.zl4pw.orcon.net.nz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Residual tone
Hi all, Have a strange issue using Logger32 with the K3 which has only recently become apparent... After keying the rig with the CW machine, there is a residual tone (about 800Hz) that I can hear thru the phones, even with the AF turned right down. The tone level is controlled by the Monitor function. Turning the K3 off and on again cures the problem until I key with the rig once again... This doesn't always happen and does not happen at all with N1MM. Be grateful for any suggestions. Cheers, Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Reverb...
Hi all, I have been made aware of a reverb on my SSB audio... and I can certainly hear it using the Monitor function I guess I've set something up incorrectly and would appreciate suggestions (other than stick to CW!). I am using a Heil Proset with HC4 cartridge. Cheers, Paul Paul Ormandy ZL4PW ZM4M http://radiodx.com http://www.zl4pw.orconhosting.net.nz/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Set-up screenshots...
Hi all, Finally got around to adding screen-shots of the configs I use for the K3 with N1MM and Logger32, using the USB-serial cable and with Config:PTT set to RTS-DTR Cheers, Paul http://www.zl4pw.orconhosting.net.nz/media/cw_keyer_3.15.jpgLogger32 CW Keyer V3.15 http://www.zl4pw.orconhosting.net.nz/media/dvk_keyer_3.15.jpgLogger32 Voice Keyer V3.15 http://www.zl4pw.orconhosting.net.nz/media/data_keyer_3.15.jpgLogger32 Digi Mode Keyer V3.15 http://www.zl4pw.orconhosting.net.nz/media/radio_setup_3.15.jpgLogger32 Radio Config http://www.zl4pw.orconhosting.net.nz/media/n1mm_setup_3.15.jpgN1MM Setup http://www.zl4pw.orconhosting.net.nz/media/n1mm_port_setup.jpgN1MM Port Settings http://www.zl4pw.orconhosting.net.nz/media/n1mm_configurer.jpgN1MM Configurer Paul Ormandy ZL4PW ZM4M http://radiodx.com http://www.zl4pw.orconhosting.net.nz/ Paul Ormandy ZL4PW ZM4M http://radiodx.com http://www.zl4pw.orconhosting.net.nz/ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 and Logger32
Hi all, Just received my K3 today... and am thinking about pulling out what little hair I have left! Could someone who is using a K3 with Logger32 please, please let me know the config arrangements for the CW DVK??? The rig is keyed when polling occurs during booting the PC so the laptop can definitely see the K3... Also the Config_PTT option to complement this... Regards, Paul Paul Ormandy ZL4PW ZM4M http://radiodx.com http://www.zl4pw.orconhosting.net.nz/ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
