Re: [Elecraft] K3 audio line in/out cables
Bob is right about cables, but things like USB hubs also need to be considered. When I transmitted at more than 100W on certain bands, my 7 port USB hub would lock up and need to be power cycled. It has a plastic case, so I got a metal box to house it, and a ferrite clamp on choke for each USB cable coming into it. I stuffed all of them into the box, bonded the case to the shack bonding system, and haven't had a problem since. (The hub supports my external keyboard, mouse, backup drive the K3, and a cable for syncing/charging my cell phone.) On 4/5/18 at 7:41 AM, rmcg...@blomand.net (Bob McGraw K4TAX) wrote: Yes both channels supported. Regarding USB cables, the standard A Male to B Male is the configuration. Be sure to look for and get good quality cables which do have a shield. This will mitigate many RFI issues associated with the cable picking up RF and allowing it to get into the computer. Of course a couple of turns through a ferrite donut on the cable will also help. 73 Bob, K4TAX --- Bill Frantz| Ham radio contesting is a| Periwinkle (408)356-8506 | contact sport. | 16345 Englewood Ave www.pwpconsult.com | - Ken Widelitz K6LA / VY2TT | Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
David: Yes both channels supported. Regarding USB cables, the standard A Male to B Male is the configuration. Be sure to look for and get good quality cables which do have a shield. This will mitigate many RFI issues associated with the cable picking up RF and allowing it to get into the computer. Of course a couple of turns through a ferrite donut on the cable will also help. 73 Bob, K4TAX On 4/5/2018 6:57 AM, David Ferrington, M0XDF wrote: Bob, does the USB unit (part number escapes me) provide 2 channels on the Codex for dual receivers? 73 de David, M0XDF (K3 #174, P3 #108) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
Well, as Rich replied, AFSK, and other digital audio modes, can be done with only the USB cable. Sometimes people use the terms FSK and AFSK non-specifically to mean "RTTY". 73,Ed W0YK Original message From: j...@kk9a.com Date: 4/5/18 7:07 AM (GMT-08:00) To: Ed W0YK Cc: Elecraft Reflector Subject: Re: [Elecraft] K3 audio line in/out cables That is what I thought. I am using an interface however some of these posts lead me to believe that it was not necessary. John KK9A Sent via the Samsung Galaxy 7 edge, an AT&T 4G LTE smartphone. On Thu, Apr 5, 2018 at 10:04 AM, Ed W0YK wrote: No. A FSK/PTT keying interface is needed between PC and K3 ACC connector. 73,Ed W0YK Original message From: j...@kk9a.com Date: 4/5/18 4:31 AM (GMT-08:00) To: elecraft@mailman.qth.net Subject: [Elecraft] K3 audio line in/out cables Can you do FSK with only a USB connection between your computer and K3? John KK9A > Date: Tue, 3 Apr 2018 12:20:02 -0400 > From: "N2TK, Tony" > > I have upgraded both of my K3's to make them as close to a K3S as best I > can. Presently cleaning up the rats nest of cables. I am using USB. > > I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan > on adding FT8 shortly. With the on board CODECs is there any reason I still > need the LINE cables? Want to check to makes sure I am not missing > something. > > 73, > > N2TK, Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to e...@w0yk.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
That is what I thought. I am using an interface however some of these posts lead me to believe that it was not necessary. John KK9A Sent via the Samsung Galaxy 7 edge, an AT&T 4G LTE smartphone. On Thu, Apr 5, 2018 at 10:04 AM, Ed W0YK wrote: > No. A FSK/PTT keying interface is needed between PC and K3 ACC connector. > > 73, > Ed W0YK > > Original message > From: j...@kk9a.com > Date: 4/5/18 4:31 AM (GMT-08:00) > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3 audio line in/out cables > > Can you do FSK with only a USB connection between your computer and K3? > > John KK9A > > > > > > Date: Tue, 3 Apr 2018 12:20:02 -0400 > > From: "N2TK, Tony" > > > > > > I have upgraded both of my K3's to make them as close to a K3S as best I > > can. Presently cleaning up the rats nest of cables. I am using USB. > > > > I no longer use the Line IN and OUT jacks. Presently only using FSK. I > plan > > on adding FT8 shortly. With the on board CODECs is there any reason I > still > > need the LINE cables? Want to check to makes sure I am not missing > > something. > > > > 73, > > > > N2TK, Tony > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to e...@w0yk.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
No. A FSK/PTT keying interface is needed between PC and K3 ACC connector. 73,Ed W0YK Original message From: j...@kk9a.com Date: 4/5/18 4:31 AM (GMT-08:00) To: elecraft@mailman.qth.net Subject: [Elecraft] K3 audio line in/out cables Can you do FSK with only a USB connection between your computer and K3? John KK9A > Date: Tue, 3 Apr 2018 12:20:02 -0400 > From: "N2TK, Tony" > > I have upgraded both of my K3's to make them as close to a K3S as best I > can. Presently cleaning up the rats nest of cables. I am using USB. > > I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan > on adding FT8 shortly. With the on board CODECs is there any reason I still > need the LINE cables? Want to check to makes sure I am not missing > something. > > 73, > > N2TK, Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to e...@w0yk.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
Thank you Don - bang on as usual (both you and Elecraft :-) 73 de David, M0XDF (K3 #174, P3 #108) We're here to put a dent in the universe. -Steve Jobs, entrepreneur and inventor (1955-2011) > On 5 Apr 2018, at 13:26, Don Wilhelm wrote: > > David, > > Yes, both channels are present. > > 73, > Don W3FPR > > On 4/5/2018 7:57 AM, David Ferrington, M0XDF wrote: >> Bob, does the USB unit (part number escapes me) provide 2 channels on the >> Codex for dual receivers? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
You cannot do FSK only AFSK Rich On 4/5/2018 7:31 AM, j...@kk9a.com wrote: Can you do FSK with only a USB connection between your computer and K3? John KK9A Date: Tue, 3 Apr 2018 12:20:02 -0400 From: "N2TK, Tony" I have upgraded both of my K3's to make them as close to a K3S as best I can. Presently cleaning up the rats nest of cables. I am using USB. I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan on adding FT8 shortly. With the on board CODECs is there any reason I still need the LINE cables? Want to check to makes sure I am not missing something. 73, N2TK, Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rwnewbo...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
David, Yes, both channels are present. 73, Don W3FPR On 4/5/2018 7:57 AM, David Ferrington, M0XDF wrote: Bob, does the USB unit (part number escapes me) provide 2 channels on the Codex for dual receivers? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
John, Yes, use AFSK A. 73, Don W3FPR On 4/5/2018 7:31 AM, j...@kk9a.com wrote: Can you do FSK with only a USB connection between your computer and K3? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
Bob, does the USB unit (part number escapes me) provide 2 channels on the Codex for dual receivers? 73 de David, M0XDF (K3 #174, P3 #108) We are like tenant farmers chopping down the fence around our house for fuel when we should be using Nature's inexhaustible sources of energy -- sun, wind and tide. ... I'd put my money on the sun and solar energy. What a source of power! I hope we don't have to wait until oil and coal run out before we tackle that. -Thomas Edison, inventor (1847-1931) > On 5 Apr 2018, at 03:17, Bob McGraw K4TAX wrote: > > Tony: > > Only need one USB cable between the radio and computer. Audio TO/FROM and > CAT commands are handled over one cable. Works great! If you plug anything > into the rear Line, it will disconnect the audio via the USB cable. > > 73 > > Bob, K4TAX > > K3S s/n 10163 > > > > On 4/4/2018 8:17 AM, elecraft-requ...@mailman.qth.net wrote: >> Message: 4 >> Date: Tue, 3 Apr 2018 12:20:02 -0400 >> From: "N2TK, Tony" >> To: >> Subject: [Elecraft] K3 audio line in/out cables >> Message-ID:<016601d3cb67$9eb505d0$dc1f1170$@verizon.net> >> Content-Type: text/plain;charset="us-ascii" >> >> I have upgraded both of my K3's to make them as close to a K3S as best I >> can. Presently cleaning up the rats nest of cables. I am using USB. >> >> I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan >> on adding FT8 shortly. With the on board CODECs is there any reason I still >> need the LINE cables? Want to check to makes sure I am not missing >> something. >> >> 73, >> >> N2TK, Tony > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to m0...@alphadene.co.uk __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 audio line in/out cables
Can you do FSK with only a USB connection between your computer and K3? John KK9A > Date: Tue, 3 Apr 2018 12:20:02 -0400 > From: "N2TK, Tony" > > I have upgraded both of my K3's to make them as close to a K3S as best I > can. Presently cleaning up the rats nest of cables. I am using USB. > > I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan > on adding FT8 shortly. With the on board CODECs is there any reason I still > need the LINE cables? Want to check to makes sure I am not missing > something. > > 73, > > N2TK, Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
Thx Bob N2TK, Tony Sent from my iPhone > On Apr 4, 2018, at 10:17 PM, Bob McGraw K4TAX wrote: > > Tony: > > Only need one USB cable between the radio and computer. Audio TO/FROM and > CAT commands are handled over one cable. Works great! If you plug anything > into the rear Line, it will disconnect the audio via the USB cable. > > 73 > > Bob, K4TAX > > K3S s/n 10163 > > > >> On 4/4/2018 8:17 AM, elecraft-requ...@mailman.qth.net wrote: >> Message: 4 >> Date: Tue, 3 Apr 2018 12:20:02 -0400 >> From: "N2TK, Tony" >> To: >> Subject: [Elecraft] K3 audio line in/out cables >> Message-ID:<016601d3cb67$9eb505d0$dc1f1170$@verizon.net> >> Content-Type: text/plain;charset="us-ascii" >> >> I have upgraded both of my K3's to make them as close to a K3S as best I >> can. Presently cleaning up the rats nest of cables. I am using USB. >> >> I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan >> on adding FT8 shortly. With the on board CODECs is there any reason I still >> need the LINE cables? Want to check to makes sure I am not missing >> something. >> >> 73, >> >> N2TK, Tony > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to tony@verizon.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 audio line in/out cables
Tony: Only need one USB cable between the radio and computer. Audio TO/FROM and CAT commands are handled over one cable. Works great! If you plug anything into the rear Line, it will disconnect the audio via the USB cable. 73 Bob, K4TAX K3S s/n 10163 On 4/4/2018 8:17 AM, elecraft-requ...@mailman.qth.net wrote: Message: 4 Date: Tue, 3 Apr 2018 12:20:02 -0400 From: "N2TK, Tony" To: Subject: [Elecraft] K3 audio line in/out cables Message-ID:<016601d3cb67$9eb505d0$dc1f1170$@verizon.net> Content-Type: text/plain; charset="us-ascii" I have upgraded both of my K3's to make them as close to a K3S as best I can. Presently cleaning up the rats nest of cables. I am using USB. I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan on adding FT8 shortly. With the on board CODECs is there any reason I still need the LINE cables? Want to check to makes sure I am not missing something. 73, N2TK, Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
No need for LINE cables if you have the updated USB KIO3 system. Sent from my iPhone ...nr4c. bill > On Apr 3, 2018, at 3:09 PM, Don Wilhelm wrote: > > Tony, > > You might want to use LINE IN for computer generated voice or something like > that. > Be aware that if you plug anything into the LINE IN jack, the K3 will turn > off the audio output (but not input) of the USB AUDIO CODEC. > > 73, > Don W3FPR > >> On 4/3/2018 12:20 PM, N2TK, Tony wrote: >> I have upgraded both of my K3's to make them as close to a K3S as best I >> can. Presently cleaning up the rats nest of cables. I am using USB. >> I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan >> on adding FT8 shortly. With the on board CODECs is there any reason I still >> need the LINE cables? Want to check to makes sure I am not missing >> something. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
Tnx Don for the info. N2tK, Tony -Original Message- From: Don Wilhelm [mailto:donw...@embarqmail.com] Sent: Tuesday, April 03, 2018 3:10 PM To: N2TK, Tony ; Elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 audio line in/out cables Tony, You might want to use LINE IN for computer generated voice or something like that. Be aware that if you plug anything into the LINE IN jack, the K3 will turn off the audio output (but not input) of the USB AUDIO CODEC. 73, Don W3FPR On 4/3/2018 12:20 PM, N2TK, Tony wrote: > I have upgraded both of my K3's to make them as close to a K3S as best > I can. Presently cleaning up the rats nest of cables. I am using USB. > > I no longer use the Line IN and OUT jacks. Presently only using FSK. > I plan on adding FT8 shortly. With the on board CODECs is there any > reason I still need the LINE cables? Want to check to makes sure I am > not missing something. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 audio line in/out cables
Tony, You might want to use LINE IN for computer generated voice or something like that. Be aware that if you plug anything into the LINE IN jack, the K3 will turn off the audio output (but not input) of the USB AUDIO CODEC. 73, Don W3FPR On 4/3/2018 12:20 PM, N2TK, Tony wrote: I have upgraded both of my K3's to make them as close to a K3S as best I can. Presently cleaning up the rats nest of cables. I am using USB. I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan on adding FT8 shortly. With the on board CODECs is there any reason I still need the LINE cables? Want to check to makes sure I am not missing something. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 audio line in/out cables
I have upgraded both of my K3's to make them as close to a K3S as best I can. Presently cleaning up the rats nest of cables. I am using USB. I no longer use the Line IN and OUT jacks. Presently only using FSK. I plan on adding FT8 shortly. With the on board CODECs is there any reason I still need the LINE cables? Want to check to makes sure I am not missing something. 73, N2TK, Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com