Re: [Elecraft] CW-Skimmer Frequency Offset
Hi, this is really some kind of strange: On the Kx3 I have Mode CW. The frequency on the waterfall of the Px3 and the skimmer are correct. Within skimmer I have narrowed it down to 30 Hz difference between the CW Pitch and Audio IF And this is the known differece between Kx3 and official frequency. I need a better source for calibrating. But later I switched from 20m to 40m and still no offset between Kx3, Px3 and Skimmer. But after 30 minutes I got from RBN the warning, that I am -1.8 kHz off. Kind of strange. 73 de Hajo DL1SDZ --- Cela est bien dit, mais il faut cultiver notre jardin. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW-Skimmer Frequency Offset
Hajo, Whatever you do, the skimmer screen shows on the screen what it is 'listening to'. So set the offset in the settings of skimmer so that skimmer shows you what you hear in the KX3. (I use the K3 with a real softrock and I can adjust the offset right on the spot.) Arie PA3A Op 16-2-2016 om 14:33 schreef Hajo Dezelski: Oh I forgot: I use the Softrock-IF as Radio (model). 73 de Hajo DL1SDZ --- Cela est bien dit, mais il faut cultiver notre jardin. On Tue, Feb 16, 2016 at 1:08 PM, Hajo Dezelskiwrote: Hello, using the Kx3 with CW skimmer and Aggregator 4.1 I got a message from RBN " RBN calculated frequency offset has a maximum value of 1.6 kHz on 20 meters. Please calibrate your skimmer to reduce this offset to a value between -0.1 and -0.1 KHz." When I change the mode on the Kx3 from cw to usb the difference is reduced to 1,0 khz. Which mode should I use to be right on the frequency? Or should I change within skimmer the Audio IF to -1600 Hz. and use CW. My frequency offset in cw is 600 Hz. Thanks for your advice 73 de Hajo DL1SDZ --- Cela est bien dit, mais il faut cultiver notre jardin. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to p...@xs4all.nl __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW-Skimmer Frequency Offset
Oh I forgot: I use the Softrock-IF as Radio (model). 73 de Hajo DL1SDZ --- Cela est bien dit, mais il faut cultiver notre jardin. On Tue, Feb 16, 2016 at 1:08 PM, Hajo Dezelskiwrote: > Hello, > > using the Kx3 with CW skimmer and Aggregator 4.1 I got a message from RBN > " RBN calculated frequency offset has a maximum value of 1.6 kHz on 20 > meters. Please calibrate your skimmer to reduce this offset to a value > between -0.1 and -0.1 KHz." > When I change the mode on the Kx3 from cw to usb the difference is reduced > to 1,0 khz. > > Which mode should I use to be right on the frequency? > > Or should I change within skimmer the Audio IF to -1600 Hz. and use CW. My > frequency offset in cw is 600 Hz. > > Thanks for your advice > > 73 de > > Hajo > DL1SDZ > > > --- > Cela est bien dit, mais il faut cultiver notre jardin. > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] CW-Skimmer Frequency Offset
Hello, using the Kx3 with CW skimmer and Aggregator 4.1 I got a message from RBN " RBN calculated frequency offset has a maximum value of 1.6 kHz on 20 meters. Please calibrate your skimmer to reduce this offset to a value between -0.1 and -0.1 KHz." When I change the mode on the Kx3 from cw to usb the difference is reduced to 1,0 khz. Which mode should I use to be right on the frequency? Or should I change within skimmer the Audio IF to -1600 Hz. and use CW. My frequency offset in cw is 600 Hz. Thanks for your advice 73 de Hajo DL1SDZ --- Cela est bien dit, mais il faut cultiver notre jardin. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com