Re: [Elecraft] Cable for KX2 and KPXA-100

2018-03-10 Thread George Danner

Tim,
I made an adaptor to use my KX3 KXPA portable when I removed it from my 
truck.
I used a headset with foot pedal PTT (or more descriptively - "stomp to 
talk").
Obviously I did not remove the cabling that was in the truck going to a tool 
box in the bed.
My home made cables are about 5' including a home made adaptor for a cat 6 
jumper.
Two years ago, I used this configuration for field day interfaced to a 
computer as well - did not use a soundcard.
The KX3 works fine in this configuration - not a KX2 - suspect they are 
similar to interface.


73
George AI4VZ

-Original Message- 
From: Don Wilhelm

Sent: Friday, March 9, 2018 5:55 PM
To: Tim N9PUZ ; Elecraft Reflector
Subject: Re: [Elecraft] Cable for KX2 and KPXA-100

Tim,

I suspect no one knows the answer because it has not been tested.
If you can find a 2 to 3 foot long TRRS plug to TRRS jack cable
(extension cable), it should be easy enough to give it a try.  If it
works, then it works.
If you have problems, be prepared to remove that extension to see if it
is the problem.
This is not an official Elecraft answer, I am just indicating that there
is an easy way to try the extension.

73,
Don W3FPR

On 3/9/2018 8:20 AM, Tim N9PUZ wrote:

I have a KX2/KPXA-100 combination. I'd like to be able to physically
separate the two more than the factory supplied cables will allow. Any
problems with adding a 2 or 3 foot extension to the KX2ACBL data/control
cable that runs between the two?

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to gdanne...@gmail.com 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Cable for KX2 and KPXA-100

2018-03-09 Thread Don Wilhelm

Tim,

I suspect no one knows the answer because it has not been tested.
If you can find a 2 to 3 foot long TRRS plug to TRRS jack cable 
(extension cable), it should be easy enough to give it a try.  If it 
works, then it works.
If you have problems, be prepared to remove that extension to see if it 
is the problem.
This is not an official Elecraft answer, I am just indicating that there 
is an easy way to try the extension.


73,
Don W3FPR

On 3/9/2018 8:20 AM, Tim N9PUZ wrote:

I have a KX2/KPXA-100 combination. I'd like to be able to physically
separate the two more than the factory supplied cables will allow. Any
problems with adding a 2 or 3 foot extension to the KX2ACBL data/control
cable that runs between the two?

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Cable for KX2 and KPXA-100

2018-03-09 Thread Tim N9PUZ
I have a KX2/KPXA-100 combination. I'd like to be able to physically
separate the two more than the factory supplied cables will allow. Any
problems with adding a 2 or 3 foot extension to the KX2ACBL data/control
cable that runs between the two?

Tim / N9PUZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com