Re: [Elecraft] K-POD Function key #'s mapping/Macro Assignments not matching K3 util assignments
I'm on Mojave 10.14.3 running K3 Util 1.16.6.25. I tried my shack MB air and my MB pro. Same issue. Weird. Using Windows util as a work around. Still a few things not matching up with the Fred Cady or stock documentation so could still be something with the rig. Not getting diversity receive to work as documented. The adventure continues... > On Mar 16, 2019, at 1:28 PM, Michael Blake wrote: > > My Mac OS version of the K3 utility writes all 16 macros and has for several > different MAC OS versions. Currently on Mojave and zero problems with any of > the Elecraft utilities. > > Very 73 - Mike - K9JRI > > > > > > >> On Mar 16, 2019, at 8:10 AM, Brian “VE3BWP” Pietrzyk >> wrote: >> >> It turns out the Mac version of the Elecraft k3 utility has a defect. It >> does not write Macros 10-16 to the K3. The windows (eww!) k3 util writes the >> macros fine so K-Pod working now as documented. >> >> Now if I could just get diversity receive to work as documented.. >> >> Thanks to Doug at Elecraft support for working through this with me through >> a power outage at their site! >> >> Thanks, >> >> Brian ve3bwp >> >>> On Mar 14, 2019, at 7:02 PM, wrote: >>> >>> Quite often folks forget a trailing semicolon after each command. It’s not >>> optional, even if there's only one command in a macro, that one command >>> must end in semicolon. >>> >>> GL! >>> >>> 73 de Dick, K6KR >>> >>> >>> -Original Message- >>> From: elecraft-boun...@mailman.qth.net >>> On Behalf Of Brian Pietrzyk (ve3bwp) >>> Sent: Thursday, March 14, 2019 15:37 >>> To: elecraft@mailman.qth.net >>> Subject: [Elecraft] K-POD Function key #'s mapping/Macro Assignments not >>> matching K3 util assignments >>> >>> I read through the archive and found no mention of this issue: >>> >>> I just got a k-Pod and a K3s and am wanting to program Function keys but >>> the tap assignments don’t seem to work. The hold ones seem to. >>> >>> I am referring to table 11-3 / p 235 in the Fred Kady K3s pdf ebook. >>> >>> The table says tap F1-F8 should map to K3 Macros 9-16, Hold F1-F8 should >>> map to K3 Macros 1-8. >>> >>> I assigned F1 Tap to VFO FINE and Hold F1 to VFO Course. By putting SWT49; >>> and SWH49; commands in Macro 1 & 9 lines respectively and this works as >>> expected. >>> >>> For F2 TAP I just want to toggle NR on/off. So I put SWT34; into Macro 10. >>> When I tap F2 nothing happens and VFO B displays MACRO 1. So I put SWT34; >>> into MACRO 2 and Hold F2 works as expected. NR toggles on/off and VFO B >>> displays MACRO 2 as expected when I hold F2. Not sure why Tap F2 acting >>> this way? >>> >>> I have the same issue with F3 & F4. I assigned BAND ^ and BAND v to tap and >>> nothing happens and VFO B display MACRO 1. Hold F3&4 Works fine. >>> >>> So essentially I can only get Tap F1 to work. I have to Hold the get the >>> rest of the function keys to work. I tried reloading the firmware into the >>> Kpod and no change. Did I get a defective KPOD? >>> >>> Thanks, >>> >>> Brian ve3bwp >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K-POD Function key #'s mapping/Macro Assignments not matching K3 util assignments
My Mac OS version of the K3 utility writes all 16 macros and has for several different MAC OS versions. Currently on Mojave and zero problems with any of the Elecraft utilities. Very 73 - Mike - K9JRI > On Mar 16, 2019, at 8:10 AM, Brian “VE3BWP” Pietrzyk wrote: > > It turns out the Mac version of the Elecraft k3 utility has a defect. It does > not write Macros 10-16 to the K3. The windows (eww!) k3 util writes the > macros fine so K-Pod working now as documented. > > Now if I could just get diversity receive to work as documented.. > > Thanks to Doug at Elecraft support for working through this with me through a > power outage at their site! > > Thanks, > > Brian ve3bwp > >> On Mar 14, 2019, at 7:02 PM, wrote: >> >> Quite often folks forget a trailing semicolon after each command. It’s not >> optional, even if there's only one command in a macro, that one command must >> end in semicolon. >> >> GL! >> >> 73 de Dick, K6KR >> >> >> -Original Message- >> From: elecraft-boun...@mailman.qth.net On >> Behalf Of Brian Pietrzyk (ve3bwp) >> Sent: Thursday, March 14, 2019 15:37 >> To: elecraft@mailman.qth.net >> Subject: [Elecraft] K-POD Function key #'s mapping/Macro Assignments not >> matching K3 util assignments >> >> I read through the archive and found no mention of this issue: >> >> I just got a k-Pod and a K3s and am wanting to program Function keys but the >> tap assignments don’t seem to work. The hold ones seem to. >> >> I am referring to table 11-3 / p 235 in the Fred Kady K3s pdf ebook. >> >> The table says tap F1-F8 should map to K3 Macros 9-16, Hold F1-F8 should map >> to K3 Macros 1-8. >> >> I assigned F1 Tap to VFO FINE and Hold F1 to VFO Course. By putting SWT49; >> and SWH49; commands in Macro 1 & 9 lines respectively and this works as >> expected. >> >> For F2 TAP I just want to toggle NR on/off. So I put SWT34; into Macro 10. >> When I tap F2 nothing happens and VFO B displays MACRO 1. So I put SWT34; >> into MACRO 2 and Hold F2 works as expected. NR toggles on/off and VFO B >> displays MACRO 2 as expected when I hold F2. Not sure why Tap F2 acting this >> way? >> >> I have the same issue with F3 & F4. I assigned BAND ^ and BAND v to tap and >> nothing happens and VFO B display MACRO 1. Hold F3&4 Works fine. >> >> So essentially I can only get Tap F1 to work. I have to Hold the get the >> rest of the function keys to work. I tried reloading the firmware into the >> Kpod and no change. Did I get a defective KPOD? >> >> Thanks, >> >> Brian ve3bwp > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K-POD Function key #'s mapping/Macro Assignments not matching K3 util assignments
It turns out the Mac version of the Elecraft k3 utility has a defect. It does not write Macros 10-16 to the K3. The windows (eww!) k3 util writes the macros fine so K-Pod working now as documented. Now if I could just get diversity receive to work as documented.. Thanks to Doug at Elecraft support for working through this with me through a power outage at their site! Thanks, Brian ve3bwp > On Mar 14, 2019, at 7:02 PM, wrote: > > Quite often folks forget a trailing semicolon after each command. It’s not > optional, even if there's only one command in a macro, that one command must > end in semicolon. > > GL! > > 73 de Dick, K6KR > > > -Original Message- > From: elecraft-boun...@mailman.qth.net On > Behalf Of Brian Pietrzyk (ve3bwp) > Sent: Thursday, March 14, 2019 15:37 > To: elecraft@mailman.qth.net > Subject: [Elecraft] K-POD Function key #'s mapping/Macro Assignments not > matching K3 util assignments > > I read through the archive and found no mention of this issue: > > I just got a k-Pod and a K3s and am wanting to program Function keys but the > tap assignments don’t seem to work. The hold ones seem to. > > I am referring to table 11-3 / p 235 in the Fred Kady K3s pdf ebook. > > The table says tap F1-F8 should map to K3 Macros 9-16, Hold F1-F8 should map > to K3 Macros 1-8. > > I assigned F1 Tap to VFO FINE and Hold F1 to VFO Course. By putting SWT49; > and SWH49; commands in Macro 1 & 9 lines respectively and this works as > expected. > > For F2 TAP I just want to toggle NR on/off. So I put SWT34; into Macro 10. > When I tap F2 nothing happens and VFO B displays MACRO 1. So I put SWT34; > into MACRO 2 and Hold F2 works as expected. NR toggles on/off and VFO B > displays MACRO 2 as expected when I hold F2. Not sure why Tap F2 acting this > way? > > I have the same issue with F3 & F4. I assigned BAND ^ and BAND v to tap and > nothing happens and VFO B display MACRO 1. Hold F3&4 Works fine. > > So essentially I can only get Tap F1 to work. I have to Hold the get the rest > of the function keys to work. I tried reloading the firmware into the Kpod > and no change. Did I get a defective KPOD? > > Thanks, > > Brian ve3bwp __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K-POD Function key #'s mapping/Macro Assignments not matching K3 util assignments
Do you have the latest FW in your K3S? On 3/14/2019 3:36 PM, Brian Pietrzyk (ve3bwp) wrote: I read through the archive and found no mention of this issue: I just got a k-Pod and a K3s and am wanting to program Function keys but the tap assignments don’t seem to work. The hold ones seem to. I am referring to table 11-3 / p 235 in the Fred Kady K3s pdf ebook. The table says tap F1-F8 should map to K3 Macros 9-16, Hold F1-F8 should map to K3 Macros 1-8. I assigned F1 Tap to VFO FINE and Hold F1 to VFO Course. By putting SWT49; and SWH49; commands in Macro 1 & 9 lines respectively and this works as expected. For F2 TAP I just want to toggle NR on/off. So I put SWT34; into Macro 10. When I tap F2 nothing happens and VFO B displays MACRO 1. So I put SWT34; into MACRO 2 and Hold F2 works as expected. NR toggles on/off and VFO B displays MACRO 2 as expected when I hold F2. Not sure why Tap F2 acting this way? I have the same issue with F3 & F4. I assigned BAND ^ and BAND v to tap and nothing happens and VFO B display MACRO 1. Hold F3&4 Works fine. So essentially I can only get Tap F1 to work. I have to Hold the get the rest of the function keys to work. I tried reloading the firmware into the Kpod and no change. Did I get a defective KPOD? Thanks, Brian ve3bwp __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K-POD Function key #'s mapping/Macro Assignments not matching K3 util assignments
I read through the archive and found no mention of this issue: I just got a k-Pod and a K3s and am wanting to program Function keys but the tap assignments don’t seem to work. The hold ones seem to. I am referring to table 11-3 / p 235 in the Fred Kady K3s pdf ebook. The table says tap F1-F8 should map to K3 Macros 9-16, Hold F1-F8 should map to K3 Macros 1-8. I assigned F1 Tap to VFO FINE and Hold F1 to VFO Course. By putting SWT49; and SWH49; commands in Macro 1 & 9 lines respectively and this works as expected. For F2 TAP I just want to toggle NR on/off. So I put SWT34; into Macro 10. When I tap F2 nothing happens and VFO B displays MACRO 1. So I put SWT34; into MACRO 2 and Hold F2 works as expected. NR toggles on/off and VFO B displays MACRO 2 as expected when I hold F2. Not sure why Tap F2 acting this way? I have the same issue with F3 & F4. I assigned BAND ^ and BAND v to tap and nothing happens and VFO B display MACRO 1. Hold F3&4 Works fine. So essentially I can only get Tap F1 to work. I have to Hold the get the rest of the function keys to work. I tried reloading the firmware into the Kpod and no change. Did I get a defective KPOD? Thanks, Brian ve3bwp __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
