[Elecraft] K-Pod Macro and P3
Hello, i send some of my actual macros used with via K-pod on my K3s Maybe could be useful for somebody... (Keep attention to the last command "#FNXn", this call the functiion on P3 button number "n", where i store my SPAN preferences) [For example FNX1 is 5 khz, FNX3 is 10 Khz, FNX4 is 20 Khz etc.] SSB UP5 SWH58;BW0320;SWT13;SWT13;FT1;SB1;UPB7;RT0;XT0;DE010;#FNX3 SSB UP10 MD2;SWH58;BW0320;SWT13;SWT13;FT1;SB1;UPB7;UPB7;RT0;XT0;DE010;#FNX4 CW UP1 SWH58;BW0040;SWT13;SWT13;FT1;SB1;UPB4;RT0;XT0;DE010;#FNX1 CLEANUP FT0;RT0;XT0;LN0;SB0;SWT13;SWT13; --- Some other useful macro command... for anyone SET POWER PC100; PC010; SET MONITOR LEVEL ML000; ML020; SUBRECEIVER SB1; ON SB0; OFF SPLIT FT1; ON FT2; OFF RECALL MEMORY 32 MC032; USING THE DIGOUT1 PIN11 on ACC MN019;MP001;MN255;PC065; SENDING WITH KEYER KS020; Set keyer speed to 20 wpm KYWIW2NOY; Send IW2NOY KYW =; Send BT -- Last, but not least, my actual configuration for K-POD button/function [If somebody is interested to know the macro behind the nutton, just write me on private] (F2 are useful when changing from SSB to Digital mode with WSJTX for example) (F8 are useful if you have a linear amplifier, like me) TappingHolding F1 IW2NOY (M1) F9 RR5NNTU (M2) F2 MIC FP F10USB F3 MIC LINEF11LSB F4 SPOTF12CW F5 SSB 5UP F13CLEANUP F6 CW 1 UP F14CLEANUP F7 MONI 0 F15MONI 20 F8 Power 10W F16Power 100W Best regards, Graziano IW2NOY / W2NOY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-POD Macro
As Don points out, you have to have the CONFIG:VFO IND set to yes (independent VFOs) to set different bands on different VFOs. Cheers and 73, Fred KE7X For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com> (Macro Programming book coming soon) From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Irwin Darack <idar...@gmail.com> Sent: Tuesday, December 13, 2016 9:56 AM To: donw...@embarqmail.com; elecraft@mailman.qth.net Subject: Re: [Elecraft] K-POD Macro I have had no luck in trying a variety of combinations using the Unlink VFO, Split and Sub Band commands in the Macro. I know wonder if you can not create a macro that sends VFO A to one band/frequency and VFO B to another band/Frequency? I am hoping that someone from Elecraft who is responsible for the Macro's can help here before I spend too much more time on this project. Thanks, Irwin KD3TB On Mon, Dec 12, 2016 at 6:44 PM, Irwin Darack <idar...@gmail.com> wrote: > > On Mon, Dec 12, 2016 at 5:22 PM Don Wilhelm <donw...@embarqmail.com> > wrote: > >> Irwin, >> Thanks, Irwin >> >> >> My guess is that you do not have VFO IND turned ON in the menu. >> >> You are trying to set the VFOs to two different bands and that requires >> >> VFO INDependent. See page 37 of the K3 manual for full disclosure. >> >> >> >> 73, >> >> Don W3FPR >> >> >> >> On 12/12/2016 5:07 PM, Irwin Darack wrote: >> >> > I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = >> 15 >> >> > Mhz. >> >> > >> >> > This sends VFO A to 20 Mhz: FA0002000;MD5;FB0001500;BW0300; >> >> > But does not send VFO B to 15 Mhz >> >> > >> >> > What am I doing wrong here? >> >> > >> >> > Thanks, >> >> > >> >> -- Irwin KD3TB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fc...@montana.edu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-POD Macro
I have had no luck in trying a variety of combinations using the Unlink VFO, Split and Sub Band commands in the Macro. I know wonder if you can not create a macro that sends VFO A to one band/frequency and VFO B to another band/Frequency? I am hoping that someone from Elecraft who is responsible for the Macro's can help here before I spend too much more time on this project. Thanks, Irwin KD3TB On Mon, Dec 12, 2016 at 6:44 PM, Irwin Darackwrote: > > On Mon, Dec 12, 2016 at 5:22 PM Don Wilhelm > wrote: > >> Irwin, >> Thanks, Irwin >> >> >> My guess is that you do not have VFO IND turned ON in the menu. >> >> You are trying to set the VFOs to two different bands and that requires >> >> VFO INDependent. See page 37 of the K3 manual for full disclosure. >> >> >> >> 73, >> >> Don W3FPR >> >> >> >> On 12/12/2016 5:07 PM, Irwin Darack wrote: >> >> > I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = >> 15 >> >> > Mhz. >> >> > >> >> > This sends VFO A to 20 Mhz: FA0002000;MD5;FB0001500;BW0300; >> >> > But does not send VFO B to 15 Mhz >> >> > >> >> > What am I doing wrong here? >> >> > >> >> > Thanks, >> >> > >> >> -- Irwin KD3TB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-POD Macro
Irwin, My guess is that you do not have VFO IND turned ON in the menu. You are trying to set the VFOs to two different bands and that requires VFO INDependent. See page 37 of the K3 manual for full disclosure. 73, Don W3FPR On 12/12/2016 5:07 PM, Irwin Darack wrote: I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = 15 Mhz. This sends VFO A to 20 Mhz: FA0002000;MD5;FB0001500;BW0300; But does not send VFO B to 15 Mhz What am I doing wrong here? Thanks, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-POD Macro
You have dual receivers? On 12/12/2016 3:07 PM, Irwin Darack wrote: I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = 15 Mhz. This sends VFO A to 20 Mhz: FA0002000;MD5;FB0001500;BW0300; But does not send VFO B to 15 Mhz What am I doing wrong here? Thanks, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K-POD Macro
I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = 15 Mhz. This sends VFO A to 20 Mhz: FA0002000;MD5;FB0001500;BW0300; But does not send VFO B to 15 Mhz What am I doing wrong here? Thanks, -- Irwin KD3TB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod Macro Question
In the notes associated with Table 5. I'm sure there are others. Those are the only commands I tested. 73, Ron AC7AC -Original Message- From: Jim McDonald [mailto:j...@n7us.net] Sent: Wednesday, October 5, 2016 11:29 AM To: 'Ron D'Eau Claire'; 'paul ecker' Cc: 'Elecraft' Subject: RE: [Elecraft] K-Pod Macro Question I don't see the UPMN097 or DNMN097 in the Programmer's Reference. I use the same macro to toggle the speakers on or off: MN097;UP;MN255; 73, Jim N7US -Original Message- Hi Paul: Try this: SWH14;UPMN097;SWT14 Enters the Config Menu, enables spkr+phones, leaves config menu. SWH14;DNMN097;SWT14 Enters Config menu, disables spkr+phones, leaves config menu. 73, Ron AC7AC -Original Message- In my K3 I have SPKR+PH set to YES, and sometime ago Iassigned a macro to PF2 that allows me to switch the speaker either on or off, even though Ihave headphones plugged in. But I'll be darn if I can remember or figure outnow, what the macro cmd would be so I can assign the same action to a K-Podbutton. Can someone help? 73Paulkc2nyu __ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod Macro Question
Sorry, I left the trailing semicolons off after the last command in each string, e.g. ...SWT14; not ...SWT14 Ron -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ron D'Eau Claire Sent: Wednesday, October 5, 2016 10:36 AM To: 'paul ecker' Cc: 'Elecraft' Subject: Re: [Elecraft] K-Pod Macro Question Hi Paul: Try this: SWH14;UPMN097;SWT14 Enters the Config Menu, enables spkr+phones, leaves config menu. SWH14;DNMN097;SWT14 Enters Config menu, disables spkr+phones, leaves config menu. 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of paul ecker via Elecraft Sent: Wednesday, October 5, 2016 8:36 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K-Pod Macro Question In my K3 I have SPKR+PH set to YES, and sometime ago Iassigned a macro to PF2 that allows me to switch the speaker either on or off, even though Ihave headphones plugged in. But I'll be darn if I can remember or figure outnow, what the macro cmd would be so I can assign the same action to a K-Podbutton. Can someone help? 73Paulkc2nyu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@cobi.biz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@cobi.biz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod Macro Question
I don't see the UPMN097 or DNMN097 in the Programmer's Reference. I use the same macro to toggle the speakers on or off: MN097;UP;MN255; 73, Jim N7US -Original Message- Hi Paul: Try this: SWH14;UPMN097;SWT14 Enters the Config Menu, enables spkr+phones, leaves config menu. SWH14;DNMN097;SWT14 Enters Config menu, disables spkr+phones, leaves config menu. 73, Ron AC7AC -Original Message- In my K3 I have SPKR+PH set to YES, and sometime ago Iassigned a macro to PF2 that allows me to switch the speaker either on or off, even though Ihave headphones plugged in. But I'll be darn if I can remember or figure outnow, what the macro cmd would be so I can assign the same action to a K-Podbutton. Can someone help? 73Paulkc2nyu __ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod Macro Question
Ron - thanks very much and also thanks to Mike Flowers K6MKF who replied off line. 73 Paulkc2nyu From: Ron D'Eau Claire <r...@cobi.biz> To: 'paul ecker' <ecke...@yahoo.com> Cc: 'Elecraft' <elecraft@mailman.qth.net> Sent: Wednesday, October 5, 2016 1:36 PM Subject: RE: [Elecraft] K-Pod Macro Question Hi Paul: Try this: SWH14;UPMN097;SWT14 Enters the Config Menu, enables spkr+phones, leaves config menu. SWH14;DNMN097;SWT14 Enters Config menu, disables spkr+phones, leaves config menu. 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of paul ecker via Elecraft Sent: Wednesday, October 5, 2016 8:36 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K-Pod Macro Question In my K3 I have SPKR+PH set to YES, and sometime ago Iassigned a macro to PF2 that allows me to switch the speaker either on or off, even though Ihave headphones plugged in. But I'll be darn if I can remember or figure outnow, what the macro cmd would be so I can assign the same action to a K-Podbutton. Can someone help? 73Paulkc2nyu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@cobi.biz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod Macro Question
Hi Paul: Try this: SWH14;UPMN097;SWT14 Enters the Config Menu, enables spkr+phones, leaves config menu. SWH14;DNMN097;SWT14 Enters Config menu, disables spkr+phones, leaves config menu. 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of paul ecker via Elecraft Sent: Wednesday, October 5, 2016 8:36 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K-Pod Macro Question In my K3 I have SPKR+PH set to YES, and sometime ago Iassigned a macro to PF2 that allows me to switch the speaker either on or off, even though Ihave headphones plugged in. But I'll be darn if I can remember or figure outnow, what the macro cmd would be so I can assign the same action to a K-Podbutton. Can someone help? 73Paulkc2nyu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@cobi.biz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K-Pod Macro Question
In my K3 I have SPKR+PH set to YES, and sometime ago Iassigned a macro to PF2 that allows me to switch the speaker either on or off, even though Ihave headphones plugged in. But I'll be darn if I can remember or figure outnow, what the macro cmd would be so I can assign the same action to a K-Podbutton. Can someone help? 73Paulkc2nyu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com