Tom,
That is not reversable - at least not currently. Will it ever be?, who
knows.
With the K-Pod, I believe a hold is easier to do because of the downward
movement rather than a button on a vertical panel, and I believe that is
the reason for the choice.
Just move the macro into the proper slot for what you want. It is easy
with the K3 Utility Macro Editor - you should be able to copy (or cut)
from one and paste it into another.
73,
Don W3FPR
On 10/3/2016 2:37 PM, cx...@4email.net wrote:
Hola,
Set up my K-Pod for K3 this morning. Initially a daunting task as I am
not a programmer but between the Programmer's ref manual(my eyes glazed
over after 6 pages), KE7X K3/P3 cookbook (Ch.11) and the enclosed
instructions, was able to set up for my modest needs.
What threw me off initially was the macro launch from F1-F8 as "Hold"
rather than "tap". That struck me as counter intuitive as the K3's
frequently used front panel selections are initiated with a 'tap'.
The workaround was to select the appropriate macro from the K3 utility
so as to mirror N1MM keyboard choices, such as F4 (tap) sends my call,
by using Macro 12, which triggers M1 (HP1XT) on the K3.
So, question is:
Is it possible to reverse this selection so that F1-8 Macro from K3
Utility is a 'tap' rather than 'hold'? Ref page 6 of K-Pod instructions.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
