Mike,
You are apparently setting PTT with the DTR signal OK,
But, how are you "sending a RTTY string"? If you are using AFSK A, the
"RTTY string" must come into the K3 as audio (likely from a soundcard) -
the easiest is to use the K3 LINE IN - plug a stereo cable between the
soundcard line out and the K3 line in.. You control the LINE OUT level
on the soundcard AND the LINE-IN level on the K3 to produce 4 bars on
the ALC display - use TX TEST to set the levels and you will not bother
anyone with a transmitted signal..
73,
Don W3FPR
Mike wrote:
> Apparently I don't understand the use of DTR/RTS for PTT.
>
> If I assert DTR, the red xmit LED comes on, but when I send an RTTY
> string to the rig, there is no output. DTR is turned on in CONFIG. I'm
> in DATA mode and set for AFSK A. What I'm after is a way to avoid VOX
> with CW ( Yeah I know for CW I need to be in CW mode), RTTY, and PSK. Is
> there a way?
>
> 73, Mike NF4L
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html