Re: [Elecraft] K3 AF knob..
Hmm, "the big three"? Elecraft, Flex and who's third, Anan or Sun? :) Martin, HS0ZED On 08/06/2018 23:20, Bob Gibson via Elecraft wrote: GEE..I wonder if the big three would do that? NOT! 73s Bob W5RG On Friday, June 8, 2018, 11:02:10 AM CDT, hawley, charles j jr wrote: 👍 Chuck KE9UW Sent from my iPhone, cjack On Jun 8, 2018, at 9:47 AM, Michael Eberle wrote: I just contacted them this week for a broken AF knob and they said they were sending a couple at no cost. 73, Mike KI0HA On 6/8/2018 08:14, Don Wilhelm wrote: Linas and all, I don't know if the policy is still in place, but several years ago, Eric stated that defective knobs would be replaced at no cost. Contact Elecraft support. 73, Don W3FPR On 6/8/2018 8:25 AM, Linas Balsys wrote: The same is here. It is the crack in the knob, I can see it. You can try to tighten up the screw a bit but not too much not to finaly break the knob. If it is not completely loose you still can find the end stop while turning very gently and slowly. The best way surely is to get the knob replaced :) 73 Linas LY2H <> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to mtebe...@mchsi.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to c-haw...@illinois.edu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hs0...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF knob..
The West Valley Amateur Radio Association, operating using the call K6EI, has known the value of all modes on a band at the same time for years. We are all Elecraft for that reason. I realize that Field Day is not a contest, but if you look at the results you can see how our solar powered, QRP operation scores. 73 Bill AE6JV On 6/8/18 at 6:22 PM, donw...@embarqmail.com (Don Wilhelm) wrote: The big DXpeditions are using Elecraft gear because they can use several on the same band without interference from one to the other - the low transmit phase noise of the Elecraft gear allows that to happen along with the superior receive performance. With ARRL Field Day coming up, that factor may be important to many Field Day operations. The ability to operate voice, data modes and CW on the same band is possible with Elecraft gear. Convince your FD club to use all Elecraft gear for that reason. 73, Don W3FPR On 6/8/2018 9:02 PM, Bill Frantz wrote: (I see the big DXpeditions using Elecraft and sometimes Flex gear. I don't see them using the others very often. Perhaps I'm missing something.) --- Bill Frantz| Security is like Government | Periwinkle (408)356-8506 | services. The market doesn't | 16345 Englewood Ave www.pwpconsult.com | want to pay for them.| Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF knob..
The big DXpeditions are using Elecraft gear because they can use several on the same band without interference from one to the other - the low transmit phase noise of the Elecraft gear allows that to happen along with the superior receive performance. With ARRL Field Day coming up, that factor may be important to many Field Day operations. The ability to operate voice, data modes and CW on the same band is possible with Elecraft gear. Convince your FD club to use all Elecraft gear for that reason. 73, Don W3FPR On 6/8/2018 9:02 PM, Bill Frantz wrote: (I see the big DXpeditions using Elecraft and sometimes Flex gear. I don't see them using the others very often. Perhaps I'm missing something.) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF knob..
Well, of the big 5, we know the policy of one of them. That's how I got replacement knobs a year or so ago. (I see the big DXpeditions using Elecraft and sometimes Flex gear. I don't see them using the others very often. Perhaps I'm missing something.) 73 Bill AE6JV On 6/8/18 at 9:20 AM, elecraft@mailman.qth.net (Bob Gibson via Elecraft) wrote: GEE..I wonder if the big three would do that? NOT! 73s Bob W5RG On Friday, June 8, 2018, 11:02:10 AM CDT, hawley, charles j jr wrote: 👍 Chuck KE9UW Sent from my iPhone, cjack On Jun 8, 2018, at 9:47 AM, Michael Eberle wrote: I just contacted them this week for a broken AF knob and they said they were sending a couple at no cost. 73, Mike KI0HA --- Bill Frantz| gets() remains as a monument | Periwinkle (408)356-8506 | to C's continuing support of | 16345 Englewood Ave www.pwpconsult.com | buffer overruns. | Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF knob..
Mike, Yep I contacted Elecraft Parts too and they are sending me a new knob at no cost. Don, I did take the knob off and test the pot and it is fine, so the knob is definitely the problem and I'm getting it fixed via an excellent Elecraft support policy from a few years ago. I'm guessing, but I'll bet the other manufacturers won't do that. Thanks Elecraft. Scott AD5HS On 6/8/2018 9:46 AM, Michael Eberle wrote: I just contacted them this week for a broken AF knob and they said they were sending a couple at no cost. 73, Mike KI0HA On 6/8/2018 08:14, Don Wilhelm wrote: Linas and all, I don't know if the policy is still in place, but several years ago, Eric stated that defective knobs would be replaced at no cost. Contact Elecraft support. 73, Don W3FPR On 6/8/2018 8:25 AM, Linas Balsys wrote: The same is here. It is the crack in the knob, I can see it. You can try to tighten up the screw a bit but not too much not to finaly break the knob. If it is not completely loose you still can find the end stop while turning very gently and slowly. The best way surely is to get the knob replaced :) 73 Linas LY2H> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to mtebe...@mchsi.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to netbs...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF knob..
GEE..I wonder if the big three would do that? NOT! 73s Bob W5RG On Friday, June 8, 2018, 11:02:10 AM CDT, hawley, charles j jr wrote: 👍 Chuck KE9UW Sent from my iPhone, cjack > On Jun 8, 2018, at 9:47 AM, Michael Eberle wrote: > > I just contacted them this week for a broken AF knob and they said they were > sending a couple at no cost. > > 73, > > Mike KI0HA > > >> On 6/8/2018 08:14, Don Wilhelm wrote: >> Linas and all, >> >> I don't know if the policy is still in place, but several years ago, Eric >> stated that defective knobs would be replaced at no cost. Contact Elecraft >> support. >> >> 73, >> Don W3FPR >> >>> On 6/8/2018 8:25 AM, Linas Balsys wrote: >>> The same is here. It is the crack in the knob, I can see it. You can try to >>> tighten up the screw a bit but not too much not to finaly break the knob. >>> If it is not completely loose you still can find the end stop while turning >>> very gently and slowly. The best way surely is to get the knob replaced :) >>> 73 Linas LY2H >>> >>> >>> <> >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to donw...@embarqmail.com >>> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to mtebe...@mchsi.com >> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to c-haw...@illinois.edu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF knob..
👍 Chuck KE9UW Sent from my iPhone, cjack > On Jun 8, 2018, at 9:47 AM, Michael Eberle wrote: > > I just contacted them this week for a broken AF knob and they said they were > sending a couple at no cost. > > 73, > > Mike KI0HA > > >> On 6/8/2018 08:14, Don Wilhelm wrote: >> Linas and all, >> >> I don't know if the policy is still in place, but several years ago, Eric >> stated that defective knobs would be replaced at no cost. Contact Elecraft >> support. >> >> 73, >> Don W3FPR >> >>> On 6/8/2018 8:25 AM, Linas Balsys wrote: >>> The same is here. It is the crack in the knob, I can see it. You can try to >>> tighten up the screw a bit but not too much not to finaly break the knob. >>> If it is not completely loose you still can find the end stop while turning >>> very gently and slowly. The best way surely is to get the knob replaced :) >>> 73 Linas LY2H >>> >>> >>> <> >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to donw...@embarqmail.com >>> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to mtebe...@mchsi.com >> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to c-haw...@illinois.edu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF knob..
I just contacted them this week for a broken AF knob and they said they were sending a couple at no cost. 73, Mike KI0HA On 6/8/2018 08:14, Don Wilhelm wrote: Linas and all, I don't know if the policy is still in place, but several years ago, Eric stated that defective knobs would be replaced at no cost. Contact Elecraft support. 73, Don W3FPR On 6/8/2018 8:25 AM, Linas Balsys wrote: The same is here. It is the crack in the knob, I can see it. You can try to tighten up the screw a bit but not too much not to finaly break the knob. If it is not completely loose you still can find the end stop while turning very gently and slowly. The best way surely is to get the knob replaced :) 73 Linas LY2H> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to mtebe...@mchsi.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF knob..
Linas and all, I don't know if the policy is still in place, but several years ago, Eric stated that defective knobs would be replaced at no cost. Contact Elecraft support. 73, Don W3FPR On 6/8/2018 8:25 AM, Linas Balsys wrote: The same is here. It is the crack in the knob, I can see it. You can try to tighten up the screw a bit but not too much not to finaly break the knob. If it is not completely loose you still can find the end stop while turning very gently and slowly. The best way surely is to get the knob replaced :) 73 Linas LY2H <> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF knob..
The same is here. It is the crack in the knob, I can see it. You can try to tighten up the screw a bit but not too much not to finaly break the knob. If it is not completely loose you still can find the end stop while turning very gently and slowly. The best way surely is to get the knob replaced :) 73 Linas LY2H <> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF Knob - No End Stops/Detents
Scott, Remove the knob and try turning the potentiometer shaft without the knob. If the potentiometer has stops as expected, the potentiometer is OK, and you have a cracked knob. Contact Elecraft support to obtain a new knob. 73, Don W3FPR On 6/6/2018 5:21 PM, Scott wrote: It's taken me 8 years to finally "break" something. Well it's not really broken it just doesn't indicate right. The smallest AF knob (the one furthest "out" from the front panel) does not stop at the min and max detent stops. It still adjusts the volume up and down ok but it does not indicate properly. Additionally it will go "all the way around" to adjust the volume. The interior sub receiver AF knob (the biggest and closest to the radio front panel) works fb. Is there any way to fix the smallest AF knob without changing the pot or is that the only fix. Thanks in advance. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF Knob - No End Stops/Detents
Buck, (and everyone else) I just inspected the knob and sure enough where one of the set screws goes into the knob is a fine crack the full length of the knob, top to bottom so to speak. So I guess I'm off to Elecraft to see if the knobs are still free or not. I vaguely recall reading about this on the list a few years back but had no problem with it then so it didn't stick in my memory. Thanks. Scott AD5HS On 6/6/2018 4:33 PM, Buck wrote: If you look at the knob carefully, you will probably discover it is cracked. Request a replacement from Elecraft. Buck, k4ia Honor Roll 8BDXCC EasyWayHamBooks.com On 6/6/2018 5:21 PM, Scott wrote: It's taken me 8 years to finally "break" something. Well it's not really broken it just doesn't indicate right. The smallest AF knob (the one furthest "out" from the front panel) does not stop at the min and max detent stops. It still adjusts the volume up and down ok but it does not indicate properly. Additionally it will go "all the way around" to adjust the volume. The interior sub receiver AF knob (the biggest and closest to the radio front panel) works fb. Is there any way to fix the smallest AF knob without changing the pot or is that the only fix. Thanks in advance. Scott AD5HS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to radiok...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to netbs...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF Knob - No End Stops/Detents
Set screw loose? Chuck Hawley c-haw...@illinois.edu Amateur Radio, KE9UW aka Jack, BMW Motorcycles From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] on behalf of Scott [netbs...@gmail.com] Sent: Wednesday, June 06, 2018 4:21 PM To: Elecraft Subject: [Elecraft] K3 AF Knob - No End Stops/Detents It's taken me 8 years to finally "break" something. Well it's not really broken it just doesn't indicate right. The smallest AF knob (the one furthest "out" from the front panel) does not stop at the min and max detent stops. It still adjusts the volume up and down ok but it does not indicate properly. Additionally it will go "all the way around" to adjust the volume. The interior sub receiver AF knob (the biggest and closest to the radio front panel) works fb. Is there any way to fix the smallest AF knob without changing the pot or is that the only fix. Thanks in advance. Scott AD5HS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to c-haw...@illinois.edu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 AF Knob - No End Stops/Detents
If you look at the knob carefully, you will probably discover it is cracked. Request a replacement from Elecraft. Buck, k4ia Honor Roll 8BDXCC EasyWayHamBooks.com On 6/6/2018 5:21 PM, Scott wrote: It's taken me 8 years to finally "break" something. Well it's not really broken it just doesn't indicate right. The smallest AF knob (the one furthest "out" from the front panel) does not stop at the min and max detent stops. It still adjusts the volume up and down ok but it does not indicate properly. Additionally it will go "all the way around" to adjust the volume. The interior sub receiver AF knob (the biggest and closest to the radio front panel) works fb. Is there any way to fix the smallest AF knob without changing the pot or is that the only fix. Thanks in advance. Scott AD5HS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to radiok...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 AF Knob - No End Stops/Detents
It's taken me 8 years to finally "break" something. Well it's not really broken it just doesn't indicate right. The smallest AF knob (the one furthest "out" from the front panel) does not stop at the min and max detent stops. It still adjusts the volume up and down ok but it does not indicate properly. Additionally it will go "all the way around" to adjust the volume. The interior sub receiver AF knob (the biggest and closest to the radio front panel) works fb. Is there any way to fix the smallest AF knob without changing the pot or is that the only fix. Thanks in advance. Scott AD5HS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com