[Elecraft] K3(S)/P3 Excellent Example - SOLD

[Alan Geller via Elecraft]

My "K3(S)/P3 Excellent Example” just sold. Happy result for buyer and seller. 
My XYL just
Gave the thumbs up to buy my K4D. As this stage in life, no room for duplicates 
in the house.
Thanks for all queries; some folks looking only for K3 dual receiver 
example…..THATSA RADIO!!

Alan/K6ADG


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3(S)/P3 for sale - Exellent Example

[Alan Geller via Elecraft]

For Sale: K3(S)/P3. - K3 with nearly all (S) options in excellent condition. 
Very clean P3

K3 (S/N 4757) upgrades:
a. KTCXO3-1  1ppm txco
b. KSYN3AUPG  Syn Board u/g
c. KXV3B.  I/O  U/G
d. KIO3BUPKT.   I/O u/g
e. K5PF3/K5LSA-6K  Gen cov + AM 6k filter
f. All 5 filters bought or  u/g to 8 poles
g. K3SSKT.  Stainless h/w upgrade

2.  P3 -F
a. CBLP3Y.  K3S adapter cable

Included:all necessary cables, Paper and  digital manuals. Hard 
pelican case for K3

Results of 2016 factory checkout:
8 volt regulator filter cap installed
KPOD ready, FP R82 to 6.8 ohm
K3 audio protection board install
Front panel gold pins
Factory cal and alignment


Operation Pak 
Consists of Heil Goldline microphone with K3 cable, Heil large earphones and 
Bencher Iambic Paddle in Black. This is sold separately.
Although only with the XCVR.

PRICING
K3(S)/P3….$2,250
Operation Pak………   $145

Pictures available if interested. QSO available on HF. Shipping extra. Local 
pickup encouraged, Redwood City location.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] ELECRAFT K3-F P3-F & SP3.

[rreynolds51]

It’s a hard decision! I’ve been looking at YouTube and talking to people that 
have both radios. Both are really good radios, as is the K3. I’ve been inactive 
for a few months so getting back into and trying to figure out what I want to 
do. I have a lot of classic radios I’ve used for years in the garage. LOL. 
Getting close to pulling the cord however.

 

73’s Rick NJ5W

 

From: Edward Mccann  
Sent: Friday, March 3, 2023 8:32 AM
To: NJ5W Rick 
Cc: Julia Tuttle ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] ELECRAFT K3-F P3-F & SP3.

 

Thanks for the background on the thread.

 

Concur that at this price level no amount of due diligence is unreasonable.

 

Hope you go for it !

 

Checking bank balance here after taxes paid this year!

 

73

Ed McCann

AG6CX





On Mar 3, 2023, at 6:08 AM, NJ5W Rick mailto:rreynold...@gmail.com> > wrote:

 

No negative experience just asking about pro’s and con’s since he had worked 
with both Flex and K4. I’m considering getting one or the other. I’ve had the 
k3 for 10 years now and thinking it’s time to replace it. 

 

Rick NJ5W

 

Rick

  _  

From: elecraft-boun...@mailman.qth.net 
<mailto:elecraft-boun...@mailman.qth.net>  mailto:elecraft-boun...@mailman.qth.net> > on behalf of Edward Mccann 
mailto:edwmcc...@gmail.com> >
Sent: Thursday, March 2, 2023 10:18:16 PM
To: Julia Tuttle mailto:ju...@juliatuttle.net> >
Cc: elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net>  
mailto:elecraft@mailman.qth.net> >
Subject: Re: [Elecraft] ELECRAFT K3-F P3-F & SP3. 

 


Tnx Julia and Dave;

I just thought it would be enlightening to hear whatever knocks “Rick” had in 
the K4, and if he actually had first hand experience with one or was parroting 
some of the negative spin floating around.

Ray was very convincing on his support of the K4, in any case!!

Good on ya’ Ray.

Ed McCann
AG6CX

> On Mar 2, 2023, at 9:08 PM, Julia Tuttle  <mailto:ju...@juliatuttle.net> > wrote:
> Thirded; another bit of context I try to provide is a quote or page number
> when "it's in the manual", and I appreciate it when others do.
> 
> (And, while we're on "ways we can make the list more usable for each
> other": please, if possible, use standard sentence case; EVERY LETTER
> CAPITALIZED and The First Letter Of Every Word Capitalized are needlessly
> difficult to read.)
> 
> 73,
> 
> Julie
> 
> On Thu, Mar 2, 2023 at 4:48 PM Dave (NK7Z)  <mailto:d...@nk7z.net> > wrote:
> 
>> I agree...  It would be nice of folks added a bit of context to their
>> replies.  Far too many replies like, "clip the red wire", happen, and
>> without having the entire thread available it is impossible to follow...
>> 
>> 73,
>> Dave,
>> https://www.nk7z.net
>> On 3/2/23 11:39, Edward Mccann wrote:
>>> Missing the correspondence that elicited your response.
>>> Would you be kind enough to forward the incoming from “Rick” ?
>>> Thanks,
>>> Ed McCann
>>> AG6CX
>>>> On Mar 2, 2023, at 11:16 AM, Ramon Batista >>> <mailto:wd4x...@gmail.com> > wrote:
>>>> We Did A Comparison Here At Home With Anan 7000-Flex 6400M-K4D , Live
>> And
>>>> With Signal Generator , Putting Noise And Carrier Signals At Filters
>>>> Bandwidth Edge Of All If Them, Injecting S1 Level And Listening To S2-3
>>>> Stations And I’ll Keep K4D By The Results. Is My Personal Experience
>> Rick.
>>>> 73’s.
>>>> __
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft@mailman.qth.net
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to edwmcc...@gmail.com <mailto:edwmcc...@gmail.com> 
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to d...@nk7z.net <mailto:d...@nk7z.net> 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>

Re: [Elecraft] ELECRAFT K3-F P3-F & SP3.

[Edward Mccann]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] ELECRAFT K3-F P3-F & SP3.

[NJ5W Rick]

No negative experience just asking about pro’s and con’s since he had worked 
with both Flex and K4. I’m considering getting one or the other. I’ve had the 
k3 for 10 years now and thinking it’s time to replace it.

Rick NJ5W

Rick

From: elecraft-boun...@mailman.qth.net  on 
behalf of Edward Mccann 
Sent: Thursday, March 2, 2023 10:18:16 PM
To: Julia Tuttle 
Cc: elecraft@mailman.qth.net 
Subject: Re: [Elecraft] ELECRAFT K3-F P3-F & SP3.


Tnx Julia and Dave;

I just thought it would be enlightening to hear whatever knocks “Rick” had in 
the K4, and if he actually had first hand experience with one or was parroting 
some of the negative spin floating around.

Ray was very convincing on his support of the K4, in any case!!

Good on ya’ Ray.

Ed McCann
AG6CX

> On Mar 2, 2023, at 9:08 PM, Julia Tuttle  wrote:
> Thirded; another bit of context I try to provide is a quote or page number
> when "it's in the manual", and I appreciate it when others do.
>
> (And, while we're on "ways we can make the list more usable for each
> other": please, if possible, use standard sentence case; EVERY LETTER
> CAPITALIZED and The First Letter Of Every Word Capitalized are needlessly
> difficult to read.)
>
> 73,
>
> Julie
>
> On Thu, Mar 2, 2023 at 4:48 PM Dave (NK7Z)  wrote:
>
>> I agree...  It would be nice of folks added a bit of context to their
>> replies.  Far too many replies like, "clip the red wire", happen, and
>> without having the entire thread available it is impossible to follow...
>>
>> 73,
>> Dave,
>> https://www.nk7z.net
>> On 3/2/23 11:39, Edward Mccann wrote:
>>> Missing the correspondence that elicited your response.
>>> Would you be kind enough to forward the incoming from “Rick” ?
>>> Thanks,
>>> Ed McCann
>>> AG6CX
>>>> On Mar 2, 2023, at 11:16 AM, Ramon Batista  wrote:
>>>> We Did A Comparison Here At Home With Anan 7000-Flex 6400M-K4D , Live
>> And
>>>> With Signal Generator , Putting Noise And Carrier Signals At Filters
>>>> Bandwidth Edge Of All If Them, Injecting S1 Level And Listening To S2-3
>>>> Stations And I’ll Keep K4D By The Results. Is My Personal Experience
>> Rick.
>>>> 73’s.
>>>> __
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft@mailman.qth.net
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to edwmcc...@gmail.com
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to d...@nk7z.net
>>
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ju...@juliatuttle.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to edwmcc...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rreynold...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] ELECRAFT K3-F P3-F & SP3.

[Edward Mccann]


Tnx Julia and Dave;

I just thought it would be enlightening to hear whatever knocks “Rick” had in 
the K4, and if he actually had first hand experience with one or was parroting 
some of the negative spin floating around.

Ray was very convincing on his support of the K4, in any case!!

Good on ya’ Ray.

Ed McCann
AG6CX

> On Mar 2, 2023, at 9:08 PM, Julia Tuttle  wrote:
> Thirded; another bit of context I try to provide is a quote or page number
> when "it's in the manual", and I appreciate it when others do.
> 
> (And, while we're on "ways we can make the list more usable for each
> other": please, if possible, use standard sentence case; EVERY LETTER
> CAPITALIZED and The First Letter Of Every Word Capitalized are needlessly
> difficult to read.)
> 
> 73,
> 
> Julie
> 
> On Thu, Mar 2, 2023 at 4:48 PM Dave (NK7Z)  wrote:
> 
>> I agree...  It would be nice of folks added a bit of context to their
>> replies.  Far too many replies like, "clip the red wire", happen, and
>> without having the entire thread available it is impossible to follow...
>> 
>> 73,
>> Dave,
>> https://www.nk7z.net
>> On 3/2/23 11:39, Edward Mccann wrote:
>>> Missing the correspondence that elicited your response.
>>> Would you be kind enough to forward the incoming from “Rick” ?
>>> Thanks,
>>> Ed McCann
>>> AG6CX
 On Mar 2, 2023, at 11:16 AM, Ramon Batista  wrote:
 We Did A Comparison Here At Home With Anan 7000-Flex 6400M-K4D , Live
>> And
 With Signal Generator , Putting Noise And Carrier Signals At Filters
 Bandwidth Edge Of All If Them, Injecting S1 Level And Listening To S2-3
 Stations And I’ll Keep K4D By The Results. Is My Personal Experience
>> Rick.
 73’s.
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to edwmcc...@gmail.com
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to d...@nk7z.net
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ju...@juliatuttle.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to edwmcc...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] ELECRAFT K3-F P3-F & SP3.

[Julia Tuttle]

Thirded; another bit of context I try to provide is a quote or page number
when "it's in the manual", and I appreciate it when others do.

(And, while we're on "ways we can make the list more usable for each
other": please, if possible, use standard sentence case; EVERY LETTER
CAPITALIZED and The First Letter Of Every Word Capitalized are needlessly
difficult to read.)

73,

Julie

On Thu, Mar 2, 2023 at 4:48 PM Dave (NK7Z)  wrote:

> I agree...  It would be nice of folks added a bit of context to their
> replies.  Far too many replies like, "clip the red wire", happen, and
> without having the entire thread available it is impossible to follow...
>
> 73,
> Dave,
> https://www.nk7z.net
> On 3/2/23 11:39, Edward Mccann wrote:
> > Missing the correspondence that elicited your response.
> >
> > Would you be kind enough to forward the incoming from “Rick” ?
> >
> > Thanks,
> >
> > Ed McCann
> > AG6CX
> >
> >> On Mar 2, 2023, at 11:16 AM, Ramon Batista  wrote:
> >>
> >> We Did A Comparison Here At Home With Anan 7000-Flex 6400M-K4D , Live
> And
> >> With Signal Generator , Putting Noise And Carrier Signals At Filters
> >> Bandwidth Edge Of All If Them, Injecting S1 Level And Listening To S2-3
> >> Stations And I’ll Keep K4D By The Results. Is My Personal Experience
> Rick.
> >> 73’s.
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to edwmcc...@gmail.com
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to d...@nk7z.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ju...@juliatuttle.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] ELECRAFT K3-F P3-F & SP3.

[Dave (NK7Z)]

I agree...  It would be nice of folks added a bit of context to their 
replies.  Far too many replies like, "clip the red wire", happen, and 
without having the entire thread available it is impossible to follow...


73,
Dave,
https://www.nk7z.net
On 3/2/23 11:39, Edward Mccann wrote:

Missing the correspondence that elicited your response.

Would you be kind enough to forward the incoming from “Rick” ?

Thanks,

Ed McCann
AG6CX


On Mar 2, 2023, at 11:16 AM, Ramon Batista  wrote:

We Did A Comparison Here At Home With Anan 7000-Flex 6400M-K4D , Live And
With Signal Generator , Putting Noise And Carrier Signals At Filters
Bandwidth Edge Of All If Them, Injecting S1 Level And Listening To S2-3
Stations And I’ll Keep K4D By The Results. Is My Personal Experience Rick.
73’s.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to edwmcc...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to d...@nk7z.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] ELECRAFT K3-F P3-F.

[Edward Mccann]

Hi Rat:

This is your response to what was probably a very interesting question with 
comments from someone named Rick, apparently  comparing your K4 to something 
else. 

I was curious as to your incoming from Rick.

Good luck wit the sale of your gear. Should go like hotcakes!

73
AG6CX

> On Mar 2, 2023, at 10:51 AM, Ramon Batista  wrote:
> 
> Hi Rick,
> 
> K4D Has No Comparison Rick, I Have The Complete Collection Of Elecraft From
> K1 Through K4. By My Experience With K4 Since 6 Months Ago I Can Tell You
> That Other Radios Can Have A Better Looking Waterfall And Scope, Fancy
> Colors And Finishing, TX Equalizers With Infinite Frequency Ranges, But In
> My Case What Matters Is Selectivity, Sensitivity, Dynamic Range, Fast And
> Accurate RX-TX Switching, Especially For CW. I Can Get Ride Of The Other
> Radios But K4D-K3S-K2100 Will Stay Here. Thank You, 73’s.
> 
> Ray WD4X
> 239-227-9414
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to edwmcc...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] ELECRAFT K3-F P3-F.

[Ray]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] ELECRAFT K3-F P3-F & SP3.

[Edward Mccann]

Missing the correspondence that elicited your response.

Would you be kind enough to forward the incoming from “Rick” ?

Thanks,

Ed McCann
AG6CX

> On Mar 2, 2023, at 11:16 AM, Ramon Batista  wrote:
> 
> We Did A Comparison Here At Home With Anan 7000-Flex 6400M-K4D , Live And
> With Signal Generator , Putting Noise And Carrier Signals At Filters
> Bandwidth Edge Of All If Them, Injecting S1 Level And Listening To S2-3
> Stations And I’ll Keep K4D By The Results. Is My Personal Experience Rick.
> 73’s.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to edwmcc...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] ELECRAFT K3-F P3-F & SP3.

[Ramon Batista]

We Did A Comparison Here At Home With Anan 7000-Flex 6400M-K4D , Live And
With Signal Generator , Putting Noise And Carrier Signals At Filters
Bandwidth Edge Of All If Them, Injecting S1 Level And Listening To S2-3
Stations And I’ll Keep K4D By The Results. Is My Personal Experience Rick.
73’s.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] ELECRAFT K3-F P3-F.

[Ramon Batista]

Hi Rick,

K4D Has No Comparison Rick, I Have The Complete Collection Of Elecraft From
K1 Through K4. By My Experience With K4 Since 6 Months Ago I Can Tell You
That Other Radios Can Have A Better Looking Waterfall And Scope, Fancy
Colors And Finishing, TX Equalizers With Infinite Frequency Ranges, But In
My Case What Matters Is Selectivity, Sensitivity, Dynamic Range, Fast And
Accurate RX-TX Switching, Especially For CW. I Can Get Ride Of The Other
Radios But K4D-K3S-K2100 Will Stay Here. Thank You, 73’s.

Ray WD4X
239-227-9414
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] ELECRAFT K3-F P3-F And SP3 Combo.

[Ramon Batista]

*For Sale An Elecraft K3-F XCVR HF-6M 100W, P3-F Panadapter With TxMon And
VGA Options And SP3 Desktop Speaker. The Three Units Are In Excellent
Cosmetic And Operational Conditions With No Dents, Dings Or Scratches. The
Sale Include The Radio DC Power Cable, Hand Microphone And Accessory Cables
For Interconnecting K3-P3-SP3. Latest Firmware Upgrades Done For K3-P3. Any
Other Option Not Listed In Radio Or Pan Adapter Details Are Not Available.
The Three Units Will Be Shipped In The Original Boxes With Inserts. Will
Trade It For ANAN 7000 DLE Or Flex 6400M-ATU. Asking Price Is $3200.00
Shipped And Insured Or Best Offer And Payment Through Zelle, USPS Money
Order Or Check. My QRZ Information Is Up To Date And Phone Number
239-227-9414. Pictures And Videos Upon Request.*

*K3-100-F*
*P3-F TxMon And VGA Options*
*SP3 Desktop Speaker*
*KPA3 100w PA*
*KAT3 Antenna Tuner*
*KXV3 Transverter Interface*
*KSYN3 Synthesizer*
*KI03 Computer Interface*
*KXV3B Preamp XTVR*
*KUSB Serial RS-232 To USB Cable*

*Main Receiver: All Filters 8 Poles*
*KFL3A 6.0 Khz AM Filter*
*KFL3A 2.8 kHZ SSB Filter*
*KFL3A 1.8 kHZ SSB Filter*
*KFL3C 400 Hz CW Filter*
*KFL3C 250 Hz CW Filter*

*Sub Receiver: All Filters 8 Poles*
*KFL3A 6.0 Khz AM Filter*
*KFL3A 2.8 kHZ SSB Filter*
*KFL3A 1.8 kHZ SSB Filter*
*KFL3C 400 Hz CW Filter*
*KFL3C 250 Hz CW Filter*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 and P3 for sale

[AB1DD]

The K3 has been spoken for.
The P3 is still available.
The P3 is fully loaded. High 2000 s/n. has the svga and modulation 
monitor installed. Has the Gems Products side panels.   All cables 
included. Price 11000.




Carl
AB1DD
sailna...@comcast.net

--
73,
Carl
AB1DD

Resistance is futile.
(don't know about reactance, though)

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 and P3 for sale

[AB1DD]

I'm selling my K3 and P3.
The K3 has S/N in the mid 7000.Fully loaded with just about everything 
to bring it up to the K3s.100watts, KDVR3,KBPF3, KIO3B, KRC2, KRX3, 
KAT3, KXV3B, maybe more that I forgot. The receiver has 6.0, 2.8, 2.1, 
1.0, and .5 filters. The 2nd receiver has a 2.8. Also included is a 
K-pod. Everything is up to specs, Software current.I would like $2000.00 
plus shipping.


The P3 is also fully loaded. High 2000 s/n. has the svga and modulation 
monitor installed. All cables included. Price 1800.00.


I would prefer to sell as a package $3500.00. I would also be willing to 
sell local and would be willing to meet up local to Chittenden County 
Vt. Shipping could be arranged.

Email if you have any questions.


--
73,
Carl
AB1DD

Resistance is futile.
(don't know about reactance, though)

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft K3 and P3's for sale

[lashap]

Hello Gang,

I have a few K3 radios,and P3's for sale,along with many K3 options.

Please email me with your needs.

Thank you,

Larry k6ro

 

 

www.LSRarecoins.com  

310-710-2869

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3/100, P3 For Sale

[bob fctaz . com]

The K3 and P3 have been sold.

Bob,
W7SNR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3/100, P3 For Sale

[bob fctaz . com]

To further add to my K3/100, P3 for sale post, the following additional 
information is necessary.

The K3/100 does have a built in ATU.

The filter complement is as follows—

FL1, Elecraft KFL3A-6K filter,
FL2, Elecraft 2.7, 5 pole filter,
FL3, Elecraft KFL3A-1.8K filter,
FL4, FLx-FRQ-0.04 KHz (700Hz by INRAD),
FL5, Elecraft KFL3A-400.

Hope this helps.

Bob Hughes
Cave Creek, AZ
b...@fctaz.com
480-488-5810
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 and P3 for sale, UK ***Sold***

[Dave]

Early serial number K3, complete with 2nd RX module. Front panel and PA
plugs/sockets have been upgraded to gold plated and all applicable official
mods done. In full working order. The radio comprises the following roofing
filters and modules:
2 x 2.8 KHz, 2 x 400 Hz, 1 x 6 KHz, 1 x 250 Hz (all 8 pole, Elecraft)
2 x KSYN3A upgraded low noise synths
KTCXO-3 (Elecraft)
KAT3 (ATU)
1 x KBPF3 (general coverage)
KXV3 (transverter interface)
KRX3 (sub receiver)
KDVR3 (digital voice recorder)
P3 (pan adapter includes cables)
Advanced Receiver Research P50VDG 6m 0.5 dB NF GaAsFET preamp

£1600
Prefer buyer inspects and collects.

Located nr J38, M62, East Yorkshire
73 Dave G4AON
-- 
Sent from my iPhone SE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 and P3 for sale, UK

[Dave]

 Early serial number K3, complete with 2nd RX module. Front panel and PA
plugs/sockets have been upgraded to gold plated and all applicable official
mods done. In full working order. The radio comprises the following roofing
filters and modules:
2 x 2.8 KHz, 2 x 400 Hz, 1 x 6 KHz, 1 x 250 Hz (all 8 pole, Elecraft)
2 x KSYN3A upgraded low noise synths
KTCXO-3 (Elecraft)
KAT3 (ATU)
1 x KBPF3 (general coverage)
KXV3 (transverter interface)
KRX3 (sub receiver)
KDVR3 (digital voice recorder)
P3 (pan adapter includes cables)
Advanced Receiver Research P50VDG 6m 0.5 dB NF GaAsFET preamp

£1600
Prefer buyer inspects and collects.

Located nr J38, M62, East Yorkshire
73 Dave G4AON
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [Elecraft-K3] Interesting P3 Anomaly

[Fred Jensen]

It doesn't "necessarily" represent your transmitted signal, but in your 
case, it seems that it is, or at least very close.  Likewise for me.  
There are amplifier stages following the IF which can [and often do] 
introduce distortion which won't show up if monitoring the IF frequency.


73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 3/15/2020 8:09 PM, David Box wrote:

Don't know what you mean "doesn't represent your transmitted signal"  It is 
leakage of your signal at the IF, I see it with my SDR that is tied to the P3 IF out and 
it looks exactly like the signal I see on a spectrum analyzer using a coupler.
de Dave K5MWR



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [Elecraft-K3] Interesting P3 Anomaly

[David Box]

Don't know what you mean "doesn't represent your transmitted signal"  It is 
leakage of your signal at the IF, I see it with my SDR that is tied to the P3 
IF out and it looks exactly like the signal I see on a spectrum analyzer using 
a coupler.
de Dave K5MWR 


On March 15, 2020 8:11:07 PM CDT, Brian K0DTJ  wrote:
>As I recall, if you disconnect the RS232 thru the P3 to the K3 it the
>P3 will display your spectrum since it doesn't know to mute during TX.
>Someone from Elecraft said it was due to "leakage" and is at IF so
>doesn't represent your transmitted signal. Seems like you found a
>software way to do this. :-)
>
>73,
>Brian, K0DTJ
>
>-=-=-=-=-=-=-=-=-=-=-=-
>Groups.io Links: You receive all messages sent to this group.
>
>View/Reply Online (#32169):
>https://groups.io/g/Elecraft-K3/message/32169
>Mute This Topic: https://groups.io/mt/71988488/839119
>Group Owner: elecraft-k3+ow...@groups.io
>Unsubscribe:
>https://groups.io/g/Elecraft-K3/leave/1881001/1870350234/xyzzy 
>[do...@suddenlink.net]
>-=-=-=-=-=-=-=-=-=-=-=-

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 and P3 price reduction

[Bill]

Has been sold. It will be missed.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 and P3 price reduction

[Bill]

K3, P3, KPod and a load of extras. Shipped USPS insured to the lower 48 
for $1800 or offer. Payment via USPS Money Order or PayPal. Cash price 
with local pickup $1700. Please email off list for more info: 
mym...@necoastal.net.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 and P3 for sale

[Bill]

K3/P3 station: K3 (built in 2012 ser. 6xxx) with 100 Watt, ATU, stock 
SSB Filter, 2.1 SSB Filter, KBPF3 General Coverage Module, KFLSA 6 kHz 
AM Filter, KXV3A RX Antenna IF Output. P3 (factory built 2012) with 
P3SVGA Adapter. Sure hand mic, MH2 handmic (modified switch), 
AudioTechnica boom mic with cable and boom adapter, Heil hand switch, 
Heil foot switch, bag of assorted cables/adapters required to 
interconnect and operate station. K-POD with cables for K3 and DC power. 
Supporting Elecraft books/manuals, Cady books, other documentation (rig 
history). Very clean and no smoke. Shipped USPS insured to the lower 48 
for $2100. Payment via USPS Money Order.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 and P3 SOLD!

[Pete Meier via Elecraft]

SOLD!  Thanks

> On Aug 18, 2019, at 2:18 AM, Pete Meier  wrote:
> 
> K3 and P3 are both in very excellent cosmetic and working condition with 
> overall low usage hours. Non-smoker environment
> All Manuals, documentation and cables included. 
> I am second owner. Purchased K3 unit in late 2015 and upgraded in 2015 with 
> the following options:
> P3, KAT3, P3-K, KPA3A, KXV3A, KBPF3, 2.7 kHz and 500 Hz Filters.
> Upgraded with KSYN3AUPG (K3S Synthesizer Upgrade Kit) in early 2017.
> 
> Summary of Transceiver Options:
> K3 160-6 Meter Transceiver with K3
> KSYN3AUPG K3S synthesizer Upgrade
> P3-K High Performance Panadapter 
> KPA3A 100-Watt Amplifier 
> KAT3A 100-Watt Automatic Antenna Tuner 
> KXV3A Interface Option
> KBPF3 General Coverage Receive Option
> 2.7 kHz Filter
> 500 Hz Filter
> MH3 Mic
> 
> CORRECT Price is $2050 plus shipping.
> New shipping boxes from Elecraft include foam inserts and bags as in original 
> boxes and both boxes will ship in a larger box - so Double Boxed!
> The shipping price will be approximately $48 for ground or $70 for 2 Day. 
> Price will vary dependent on ship to location.
> 
> Pete Meier
> pmeier at me.com 
> Amateur Radio Callsign: WK8S
> || I never lose. If I don't win, I learn. - unknown author ||
> Pete Meier
> pmeier at me.com 
> Amateur Radio Callsign: WK8S
> || I never lose. If I don't win, I learn. - unknown author ||
> 

Pete Meier
pmeier at me.com
Amateur Radio Callsign: WK8S
|| I never lose. If I don't win, I learn. - unknown author ||

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3-F, P3-F, K3S/0 complete remote setup

[Roger Palmer]

This K3-F loaded with almost every option.
P3-F plus options.
Both main and 2nd rcvr updated with the S synthesizers. 
Email please.
73 Roger K7ERQ 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For sale: Elecraft K3 plus P3 panadapter

[Laurens Sierdsma]

For sale:



Elecraft K3/100 plus P3 panadapter



#5996



KDVR3 (Voicekeyer)
KAT3A (Antennetuner)
KXV3B (RX Ant, IF Out & Xvrtr Int)



Included P3

2400 Euro’s



Without P3

1800 Euro’s



Email for more info or pictures





73



Laurens PD9X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Elecraft K3 and P3 for sale

[Robert Nobis - N7RJN]

I am selling my complete Elecraft K3-100 (dual receiver) and P3 System. The K3 
includes all options that make the K3 as close to a K3S as possible. Asking 
$5,125 for the complete rig (K3 + P3) including USPS Priority Mail shipping 
within USA only. Willing to consider all reasonable offers. (Original price 
$7,324) 

Payment via PayPal only.  

Non-smoking environment. Only used in my ham shack, no portable operation. 
Also, includes all manuals.  


Contact me directly at my email address for more details: 


The installed configuration is as follows: 

K3-K Transceiver Ser 7873 1 each

KPA-3 100W PA 1 each

KSYN3AUPG - KSYN3A Upgrade 2 each

KAT3 ATU 1 each

KXV3B- RX Ant, IF Out & Xverter Interface 1 each

KTCXO03-1 TCXO 1 each

KRX3-K 2nd Rx Module 1 each

KFL3A - 2.8 KHz Filter 2 each

KFL3A - 2.1KHz Filter 2 each

KFL3A - 6K 6.0KHz Filter 2 each

KFL3A - 400 400Hz Filter 2 each

700Hz INRAD Roofing Filter 2 each

KUSB 1 each

KPCA-F Power Cable 1 each

MH2 - Handheld Microphone 1 each

KIO3BUPKT with CBLP3y 1 each

PR-10 Low Noise Preamp 1 each

KPOD for K3 1 each

 

P3 Panadapter 1 each

P3SVGA Video/FFT Adapter 1 each

P3TXMON with DCHF-2000 Coupler (1.8-54MHz) 1 each






















 

Bob Nobis 
n7rjn at  nobis.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3/100 + P3 **Update**

[Phil Hystad]

Earlier post Updated — the P3 has been sold...

For Sale:  K3/100 Configuration as shown below

Updated Price:  $1950 inclusive of shipping/insurance to CONUS destination.

The complement included in the K3, serial number #6183:

  — K3/100 with standard 2.7 kHz Filter
  — KAT3:K3 ATU Option
  — KXV3A:  RX Ant., IF Out and Xverter Interface Option
  — KFL3A-250-R:   250 Hz, 8-Pole Filter
  — KFL3A-400-R:   400 Hz, 8-Pole Filter
  — KFL3A-1.0K-R:  1 kHz, 8-Pole Filter
  — MH2:  Hand Held microphone for the K3
  — KUSB: Universal Serial Bus Adapter

This K3 (modular kit) is fully assembled and calibrated per Elecraft 
calibration procedures.  It is fully
functional with no dents, no scratches, and no dust or dirt on the cabinet.  
Used only in a non-smoking
environent.

Also, Elecraft documentation for the K3 plus the Fred Cady “Elecraft K3” book.

Also, I (posting this ad for Fred) can be contacted at this address or with 
Phil’s (K7PEH) address
offline for any additional questions and photos of the equipment.

73, Fred, KE7FB
fbirc...@gmail.com

Posted by Phil, K7PEH
phys...@mac.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3/100 + P3 **Update**

[Phil Hystad]

I am posting this ad for a friend, Fred KE7FB, who is reluctantly selling his 
K3+P3.  Fred’s e-mail address is listed below and you can contact him or me 
(Phil) or both of us for any questions on the items listed or photos of the 
equipment.

For Sale:  K3/100 and P3

The complement included in the K3, serial number #6183:

   — K3/100 with standard 2.7 kHz Filter
   — KAT3:K3 ATU Option
   — KXV3A:  RX Ant., IF Out and Xverter Interface Option
   — KFL3A-250-R:   250 Hz, 8-Pole Filter
   — KFL3A-400-R:   400 Hz, 8-Pole Filter
   — KFL3A-1.0K-R:  1 kHz, 8-Pole Filter
   — MH2:  Hand Held microphone for the K3
   — KUSB: Universal Serial Bus Adapter

This K3 (modular kit) is fully assembled and calibrated per Elecraft 
calibration procedures.  It is fully
functional with no dents, no scratches, and no dust or dirt on the cabinet.  
Used only in a non-smoking
environent.

Also, Elecraft documentation for the K3 plus the Fred Cady “Elecraft K3” book.

For Sale:   P3-K Panadapter for the K3

The P3-K, Panadapter for the K3, serial # 1870 is fully assembled and 
completely functional with no
dents, no scratches, and also it has no dust or dirt on it either.  Used only 
in a non-smoking 
environment.

A spiral bound copy of the P3 documentation will be included (the original 
documentation was lost
in transit during move from Oregon to Wisconsin or worse, lost somewhere down 
in the basement
of the house).  So, a bound copy of the full downloaded and printed 
documentation for the P3 is included.

This equipment is offered individually or bundled together for a slight 
discount.

K3:  $2000 inclusive of shipping with insurance to any CONUS address 
destination.
P3:  $450 inclusive of shipping with insurance to any CONUS address destination.

Discounted package of K3+P3:  $2300 inclusive of shipping and insurance to any 
CONUS address destination.

Payment by Paypal direct to Fred Birch (the seller) at fbirc...@gmail.com.

Preference will be given to sales of the bundled K3+P3 but all offers will be 
seriously considered in the
order they are received.

If interested or if you have questions about this offer please contact me off 
list.

Also, I (posting this ad for Fred) can be contacted at this address or with 
Phil’s (K7PEH) address
offline for any additional questions and photos of the equipment.

73, Fred, KE7FB
fbirc...@gmail.com

Posted by Phil, K7PEH
phys...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Elecraft K3 and P3 for Sale with accessories

[Ramon Tristani]

Elecraft K3 and Accessories for Sale
by NQ9V

K3/100 Serial #4416 Equipped with:
KBPF3 General Coverage Receive Module
KFL3A-500 
KTCX03-1 K3 TCXO (1 ppm)
KXV3A K3 RX Antenna, IF Out & Transverter Interface
KAT3 - Internal Auto Tuner with additional antenna port
P-3K Panadapter Serial# 315 
Padded Travel Bag by Rose for K3 with extra pockets (sorry… with NQ9V 
embroidered)
DC Power cable e/w power poles at the K3 end and eye connectors for the P/S
RS232 cable from P3 to K3
IF cable between P3 and K3
DC cable from K3 to P3
PC USB to K3 Serial connector cable equipped with latest FTDI chip
Spiral bound Manuals for K3, P3, K3 and P3 Programmer’s Reference, Fred Cady’s 
K3 Design, Configuration, and Operation (no extra cost)
Both P3 and K3 updated to last firmware (done with K3/P3 Utility)

Total original cost: .. $3629.00
Package Sale Price: ………   $2178.00
Shipping to USA …  $50.00

Total Sale Price: $2228.00


Since returns are not accepted, I prefer the equipment to be demonstrated and 
tested in front of the future owner or designated witness prior to delivery. 
All systems are in perfect shape, no scratches, always in Air Conditioned 
Environment. Equipment located in my residence at Fuquay Varina, NC.

Payment via PayPal only to:

Ramon Tristani
r.trist...@gmail.com 
Telephone: 812-340-1975


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] For Sale: Elecraft K3 and P3 combo

[PHILIP GRAITCER]

I am downsizing to an apartment and I will not have room for a station. I am 
selling a K3/P3 combination, along with microphone, interconnecting cables, and 
manuals. Here are the details:

K3 SN 696, purchased from estate and built in 2/2007
Includes:
100 Watt amplifier
ATU
General Coverage Module
KXV3A Interface
KFL3A-500 500Hz, 5 pole filter (CW filter)
Elecraft MH2 microphone

ELECRAFT P3 (panadapter) SN 1772 purchased and built by me 12/2011

The K3 has been updated with suggested factory mods thru June 2013 and it met 
or exceeded all factory standards at that time. (Elecraft letter stating this 
available.)

The equipment is in use at my QTH now (Atlanta) and works perfectly as it has 
since I purchased the transceiver in 2011. All equipment is in top condition, 
nonsmoking environment, never in the field or mobile. Selling because I am 
moving into an apartment. I would like to sell both of these together. Price 
$2300.00 including packing and shipping in the US.

Contact me at W3HZZ at me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 with P3

[Don Wilhelm]

If you have AVERAGING on, it can cause the baseline of the display to 
vary with the signals in the band.


73,
Don W3FPR

On 12/12/2016 9:37 AM, GW4DVB wrote:

Hi... I have a K3 with P3

When using on 40m and higher I notice that a stronger signal on the band HF
and LF affect the background noise level of the band and signals in general
rise and fall by up to 3 S points.

Assuming that the P3 is only displaying what comes out of the K3 I am
assuming that this is a setting that needs working on within the K3

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 with P3

[Guy Olinger K2AV]

Referring to the P3 menu's NB setting. That will spread very strong signals
on the P3 display.

73, Guy K2AV

On Monday, December 12, 2016, Richard Fjeld  wrote:

> As I remember, the P3 is un-affected by settings on the K3.  Nice if you
> use the RF gain control, etc.
>
> As for the signals rising and falling in S units because of a stronger
> signal, I am at a loss to explain at the moment.
>
> Dick, n0ce
>
>
> On 12/12/2016 8:37 AM, GW4DVB wrote:
> > Hi... I have a K3 with P3
> >
> > When using on 40m and higher I notice that a stronger signal on the band
> HF
> > and LF affect the background noise level of the band and signals in
> general
> > rise and fall by up to 3 S points.
> >
> > Assuming that the P3 is only displaying what comes out of the K3 I am
> > assuming that this is a setting that needs working on within the K3
> >
> > ATT = On
> >
> > Pre  = Off
> >
> > Has anyone else come across this and found a fix ??
> >
> >
> >
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net 
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av@gmail.com 
>


-- 
Sent via Gmail Mobile on my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 with P3

[Richard Fjeld]

As I remember, the P3 is un-affected by settings on the K3.  Nice if you 
use the RF gain control, etc.

As for the signals rising and falling in S units because of a stronger 
signal, I am at a loss to explain at the moment.

Dick, n0ce


On 12/12/2016 8:37 AM, GW4DVB wrote:
> Hi... I have a K3 with P3
>
> When using on 40m and higher I notice that a stronger signal on the band HF
> and LF affect the background noise level of the band and signals in general
> rise and fall by up to 3 S points.
>
> Assuming that the P3 is only displaying what comes out of the K3 I am
> assuming that this is a setting that needs working on within the K3
>
> ATT = On
>
> Pre  = Off
>
> Has anyone else come across this and found a fix ??
>
>
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 with P3

[Guy Olinger K2AV]

Do you have the P3 NB on?

73, Guy K2AV

On Monday, December 12, 2016, GW4DVB  wrote:

> Hi... I have a K3 with P3
>
> When using on 40m and higher I notice that a stronger signal on the band HF
> and LF affect the background noise level of the band and signals in general
> rise and fall by up to 3 S points.
>
> Assuming that the P3 is only displaying what comes out of the K3 I am
> assuming that this is a setting that needs working on within the K3
>
> ATT = On
>
> Pre  = Off
>
> Has anyone else come across this and found a fix ??
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.
> nabble.com/K3-with-P3-tp7624604.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net 
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av@gmail.com 
>


-- 
Sent via Gmail Mobile on my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 with P3

[GW4DVB]

Hi... I have a K3 with P3

When using on 40m and higher I notice that a stronger signal on the band HF
and LF affect the background noise level of the band and signals in general
rise and fall by up to 3 S points.

Assuming that the P3 is only displaying what comes out of the K3 I am
assuming that this is a setting that needs working on within the K3

ATT = On

Pre  = Off

Has anyone else come across this and found a fix ??





--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-with-P3-tp7624604.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 and P3 cleaning - after action report

[Jerry]

Get Rose to make some covers for you. An ounce of prevention is worth a pound 
of cure.

Sent from my iPad

> On Aug 2, 2016, at 12:11 AM, Bill Frantz  wrote:
> 
> With all the good advice about cleaning my equipment, I finally tackled the 
> task. I first wiped the outside of the P3 with a damp cloth to remove the 
> external dust. I then took it to the bench with its anti-static mat and wrist 
> strap, and opened it up. I couldn't find any dust inside, so I called it good 
> and closed it up again.
> 
> I did the same with the K3. It actually had some detectable dust in the 100W 
> amp section. I wiped that out with a damp rag and called it good.
> 
> My conclusion is that the radios are quite well dust sealed, even if there 
> isn't a spec for this aspect of their performance.
> 
> Thanks to everyone who responded for your advice. I'm glad that heroic 
> measures were not necessary.
> 
> 73 Bill AE6JV
> 
> ---
> Bill Frantz| Concurrency is hard. 12 out  | Periwinkle
> (408)356-8506  | 10 programmers get it wrong. | 16345 Englewood Ave
> www.pwpconsult.com |- Jeff Frantz | Los Gatos, CA 95032
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to je...@carolinaheli.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 and P3 cleaning - after action report

[Bill Frantz]

With all the good advice about cleaning my equipment, I finally 
tackled the task. I first wiped the outside of the P3 with a 
damp cloth to remove the external dust. I then took it to the 
bench with its anti-static mat and wrist strap, and opened it 
up. I couldn't find any dust inside, so I called it good and 
closed it up again.


I did the same with the K3. It actually had some detectable dust 
in the 100W amp section. I wiped that out with a damp rag and 
called it good.


My conclusion is that the radios are quite well dust sealed, 
even if there isn't a spec for this aspect of their performance.


Thanks to everyone who responded for your advice. I'm glad that 
heroic measures were not necessary.


73 Bill AE6JV

---
Bill Frantz| Concurrency is hard. 12 out  | Periwinkle
(408)356-8506  | 10 programmers get it wrong. | 16345 
Englewood Ave
www.pwpconsult.com |- Jeff Frantz | Los Gatos, 
CA 95032


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KE7X "The Elecraft K3 and P3, 3rd. Edition -- Incorporating the KXV3B and KIO3B"

[Cady, Fred]

Hello all,

Just Released:

This book covers the details you need to effectively operate the Elecraft K3 
and P3. If you are thinking about buying a used Elecraft K3, this book will 
help you review the options that may be in your proposed purchase. Many options 
are still available. Some are no longer available, usually due to components 
being no longer available, and some can be replaced by newer K3S modules. We 
briefly describe these and cover in more detail the popular KXV3B Transverter 
and Receive Antenna Interface and the KIO3B I/O Interface while comparing them 
with their K3 predecessors. If you all ready have a copy of "The Elecraft K3 - 
Design, Configuration, and Operation, 2nd Edition", you might consider 
purchasing "Upgrading the K3 with K3s Components". If you want all your 
information in one place, this is the book for you. You might also consider 
"The Elecraft KPA500 Amplifier and KAT500 Tuner" if you are going to add these 
to your basic K3 and P3 station.


Printed, spiral coil bound copies are available from 
www.lulu.com,<http://www.lulu.com> as is the PDF downloadable version.  You can 
also purchase the PDF  version from KE7X.


See www.ke7x.com<http://www.ke7x.com> for full tables of contents and 
Frequently Asked Questions and ordering information.


73,

Fred KE7X

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3/100, P3, KPA500, more...

[Arlen Fletcher]

The KPA500, ZN5 Key, and the P3 have all been sold pending funds.


 On Aug 20, 2015, at 8:33 AM, Arlen Fletcher arlenfletc...@mac.com wrote:
 
 I’m selling my K3/100 (S/N 81xx), P3 (S/N 31xx)  and KPA500 (S/N 6xx) as well 
 as some other misc equipment.  Continental U.S. buyers only please! All gear 
 is in proper working order and is from a smoke-free and animal-free home. The 
 KPA500 has had one previous owner, and the AL-80B was an “open Box” purchase 
 from DX Engineering. All the other equipment was purchased new and is being 
 sold by the original owner. Photos are on my QRZ page (AA7F). I’ll pay for 
 standard surface shipping, you pay the difference if you want expedited 
 shipping. Payment accepted via cashier’s check only. 
 
 Equipment details follow:
 
 Elecraft K3/100 - purchased new in March 2014 - Excellent condition, no 
 scratches, no dents,  $2800
 
 Includes:
 
   • KPA3 100W PA Module
   • KAT3 ATU Module
   • KXV3A RX Ant, IF Out,  Xverter Interface
   • KFL3A-2.7k 2700Hz, 5-pole filter
   • KFL3A-400 400Hz, 8-pole filter
   • KRX3 2nd Rcvr
   • KFL3A-2.7k 2700Hz 5-pole filter for KRX3
   • KFL3A-400 8-pole filter for KRX3
   • Manuals included
 
 
 Elecraft P3 - purchased new in March 2014 - Excellent condition, small 
 scratch on the top surface of the front panel, no dents, $500
 
 Elecraft KPA500 - purchased used within the last 2 months (minor cosmetic 
 scratches on rear of top panel from previous owner) $1700
 
 
 
 Non-Elecraft gear for sale:
 
 Ameritron AL80B amplifier - “Open Box” purchase from DX Engineering in 2014. 
 The W8JI TOF module (http://www.w8ji.com/TOF1.htm) is installed in this amp.  
 $850
 
 Palstar HF-Auto antenna tuner - (S/N 231xx) purchased new from DX Engineering 
 in Aug 2014 - Excellent condition, no scratches, no dents, $1200
 
 LP100A Digital Vector Wattmeter (S/N 040xx) w/ standard coupler - purchased 
 new from Telepost in Sept 2014, Excellent condition, no scratches, no dents, 
 $350
 
 N3ZN model ZN5 Iambic Key, brass version, like new! (S/N 129) $275
 
 73,
 
 Arlen - AA7F
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to arlenfletc...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3/100, P3, KPA500, more...

[Arlen Fletcher]

The KPA500, ZN5 Key, P3, AL80B, and LP-100A have all been sold - pending 
payment.
 
 
 On Aug 20, 2015, at 8:33 AM, Arlen Fletcher arlenfletc...@mac.com wrote:
 
 I’m selling my K3/100 (S/N 81xx), P3 (S/N 31xx)  and KPA500 (S/N 6xx) as 
 well as some other misc equipment.  Continental U.S. buyers only please! All 
 gear is in proper working order and is from a smoke-free and animal-free 
 home. The KPA500 has had one previous owner, and the AL-80B was an “open 
 Box” purchase from DX Engineering. All the other equipment was purchased new 
 and is being sold by the original owner. Photos are on my QRZ page (AA7F). 
 I’ll pay for standard surface shipping, you pay the difference if you want 
 expedited shipping. Payment accepted via cashier’s check only. 
 
 Equipment details follow:
 
 Elecraft K3/100 - purchased new in March 2014 - Excellent condition, no 
 scratches, no dents,  $2800
 
 Includes:
 
  • KPA3 100W PA Module
  • KAT3 ATU Module
  • KXV3A RX Ant, IF Out,  Xverter Interface
  • KFL3A-2.7k 2700Hz, 5-pole filter
  • KFL3A-400 400Hz, 8-pole filter
  • KRX3 2nd Rcvr
  • KFL3A-2.7k 2700Hz 5-pole filter for KRX3
  • KFL3A-400 8-pole filter for KRX3
  • Manuals included
 
 
 Elecraft P3 - purchased new in March 2014 - Excellent condition, small 
 scratch on the top surface of the front panel, no dents, $500
 
 Elecraft KPA500 - purchased used within the last 2 months (minor cosmetic 
 scratches on rear of top panel from previous owner) $1700
 
 
 
 Non-Elecraft gear for sale:
 
 Ameritron AL80B amplifier - “Open Box” purchase from DX Engineering in 2014. 
 The W8JI TOF module (http://www.w8ji.com/TOF1.htm) is installed in this amp. 
  $850
 
 Palstar HF-Auto antenna tuner - (S/N 231xx) purchased new from DX 
 Engineering in Aug 2014 - Excellent condition, no scratches, no dents, $1200
 
 LP100A Digital Vector Wattmeter (S/N 040xx) w/ standard coupler - purchased 
 new from Telepost in Sept 2014, Excellent condition, no scratches, no dents, 
 $350
 
 N3ZN model ZN5 Iambic Key, brass version, like new! (S/N 129) $275
 
 73,
 
 Arlen - AA7F
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to arlenfletc...@mac.com
 
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to arlenfletc...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3/100, P3, KPA500, more...

[Mike VE3YF]

Hi Arlen:

I am greatly interested in the KPA500. I would get you to ship it to 
Elecraft for me, this way you don't have to fill out any special 
paperwork. Do you have any pictures available of the Amp and the area 
where the scratches are. Also is the KPAK3Aux cable available. Tnx.



73 De Mike
VE3YF

http://www.ve3yf.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3/100, P3, KPA500, more...

[Arlen Fletcher]

The P3 has been spoken for.

Thanks.

Arlen - AA7F

 On Aug 20, 2015, at 8:33 AM, Arlen Fletcher arlenfletc...@mac.com wrote:
 
 I’m selling my K3/100 (S/N 81xx), P3 (S/N 31xx)  and KPA500 (S/N 6xx) as well 
 as some other misc equipment.  Continental U.S. buyers only please! All gear 
 is in proper working order and is from a smoke-free and animal-free home. The 
 KPA500 has had one previous owner, and the AL-80B was an “open Box” purchase 
 from DX Engineering. All the other equipment was purchased new and is being 
 sold by the original owner. Photos are on my QRZ page (AA7F). I’ll pay for 
 standard surface shipping, you pay the difference if you want expedited 
 shipping. Payment accepted via cashier’s check only. 
 
 Equipment details follow:
 
 Elecraft K3/100 - purchased new in March 2014 - Excellent condition, no 
 scratches, no dents,  $2800
 
 Includes:
 
   • KPA3 100W PA Module
   • KAT3 ATU Module
   • KXV3A RX Ant, IF Out,  Xverter Interface
   • KFL3A-2.7k 2700Hz, 5-pole filter
   • KFL3A-400 400Hz, 8-pole filter
   • KRX3 2nd Rcvr
   • KFL3A-2.7k 2700Hz 5-pole filter for KRX3
   • KFL3A-400 8-pole filter for KRX3
   • Manuals included
 
 
 Elecraft P3 - purchased new in March 2014 - Excellent condition, small 
 scratch on the top surface of the front panel, no dents, $500
 
 Elecraft KPA500 - purchased used within the last 2 months (minor cosmetic 
 scratches on rear of top panel from previous owner) $1700
 
 
 
 Non-Elecraft gear for sale:
 
 Ameritron AL80B amplifier - “Open Box” purchase from DX Engineering in 2014. 
 The W8JI TOF module (http://www.w8ji.com/TOF1.htm) is installed in this amp.  
 $850
 
 Palstar HF-Auto antenna tuner - (S/N 231xx) purchased new from DX Engineering 
 in Aug 2014 - Excellent condition, no scratches, no dents, $1200
 
 LP100A Digital Vector Wattmeter (S/N 040xx) w/ standard coupler - purchased 
 new from Telepost in Sept 2014, Excellent condition, no scratches, no dents, 
 $350
 
 N3ZN model ZN5 Iambic Key, brass version, like new! (S/N 129) $275
 
 73,
 
 Arlen - AA7F
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to arlenfletc...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 and P3 Utilities under Ubuntu

[Ramon Tristani]

I am running Ubuntu Linux here and having difficulty installing and 
running the K3 and P3 Utilities. I would appreciate any help installing 
and running the applications under Ubuntu.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 and P3 Utilities under Ubuntu

[David Sanders W4DES]

If you are running a 64-bit version of Ubuntu, you need the 32-bit libraries to 
be installed since the utilities are compiled for 32-bit linux.

I’m not sure exactly how on Ubuntu, but for 64-bit debian you would need a 
sequence of commands like this:
#dpkg —add-architecture i386
#apt-get update
#apt-get install ia32-libs
#apt-get install ia32-libs-gtk

Then you can run the k3util binary that is distributed by Elecraft.


73, David W4DES








On Apr 3, 2014, at 2:48 PM, Ramon Tristani r.trist...@gmail.com wrote:

 I am running Ubuntu Linux here and having difficulty installing and running 
 the K3 and P3 Utilities. I would appreciate any help installing and running 
 the applications under Ubuntu.
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to w4...@sandersweb.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3/100 P3/SVGA for sale

[NZ8J]

The K3/100 and P3/SVGA have been sold thanks to all who responded
Tim
Nz8J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3/100 P3/SVGA for sale

[Tim Cook]

I still have my K3/100 and P3 up for sale. K3/100 # 4072 
 Excellent condition non smoking environment, I am the second owner. Has the 
following options 
KFL3A-500 - 500 Hz 5-pole IF filter 
 KBPF3 - General coverage receive filter 
 KAT3 - Internal ATU with 2nd Ant Jack (both ant jacks have BNC connectors, but 
you can change back to the included original SO-239 if you want) 
KXV3A - RX Ant, IF Out and Xverter Interface 
 KDVR3 - Digital voice recorder 
 KTCX03-1 - High stability reference oscillator 
 MH2 - hand microphone 
 Power cord 
 Original User and Assembly Manuals 
$2275
P3/SVGA #1476 It works great, the right side panel has some scratches on it 
otherwise in excellent condition. 
Works great. 
BNC RF cable 
 Power cord 
DB9 cable to connect to the K3 Manual 
 $795
 US Postal money order.

 Package deal $3000 split shipping/ins

 n...@woh.rr.com for more info if wanted 
 Thanks 
 Tim 
NZ8J



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 and P3

[Larry Boekeloo]

Hi everyone.  Happy Thanksgiving to all!

I know I've seen this posted but can't pull it up..

How does one know if your K3 is capable of powering the P3?  Is there a 
specific serial number or a specific rev level or something?

Thanks.

Larry, KN8N
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 and P3

[Joe Subich, W4TV]

All K3s are capable of powering the P3 ... however, if you order
the P3SVGA it will come with a modification kit to increase the
current available from the K3 Switched +12V to power the P3SVGA.
See K3MDKIT here:
http://www.elecraft.com/order_form_parts.htm#K3%20Parts

73,

   ... Joe, W4TV


On 11/29/2013 6:27 PM, Larry Boekeloo wrote:

Hi everyone.  Happy Thanksgiving to all!

I know I've seen this posted but can't pull it up..

How does one know if your K3 is capable of powering the P3?  Is there a 
specific serial number or a specific rev level or something?

Thanks.

Larry, KN8N
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 and P3

[Bill Frantz]

The K3 will power the P3. Older K3s will need a mod to increase 
power output from 1/2 amp to 1 amp if the P3 has a SVGA board. 
The mod is included with the SVGA. See http://www.elecraft.com/order_form_parts.htm#K3%20Parts.


It works very well.

Cheers - Bill, AE6JV

On 11/29/13 at 3:27 PM, lboeke...@sbcglobal.net (Larry Boekeloo) wrote:

How does one know if your K3 is capable of powering the P3?  
Is there a specific serial number or a specific rev level or something?

-
Bill Frantz| Re: Hardware Management Modes: | Periwinkle
(408)356-8506  | If there's a mode, there's a   | 16345 
Englewood Ave
www.pwpconsult.com | failure mode. - Jerry Leichter | Los Gatos, 
CA 95032


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 with P3 on the air

[W0WFH Bill]

Greeting all,  My K3/100 I picked up from KP4Y 
Is just about all complete, I added the KDVR3 and KATU3 
plus the FM filter.  I also have the XV144 transverter off
my K2 on the K3 and it works super!

An as of today I now have the P3 installed (waiting on the 
SVGA board).

It all working the K3 is S/n 6061 and the P3 is 2817.

Now I will be looking for a KPA 500 amplifier and my K Line
will be complete.  

From what I seen so far this is going to be a great station.
Been using an FT 920 for 15 years worked a lot of 6 meter DX
but now with this set up should be able to finish off DXCC 
only need 5 more countries confirmed.

73, Bill, W0WFH
EM48ck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3-100 / P3 Combo For Sale

[Gary Chaffin]

I have posted my K3/P3 rig for sale at the following link:
http://www.eham.net/classifieds/detail/416960
Rig works flawlessly and is in excellent cosmetic condition.
73, Gary/W5ETJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 and P3 for sale UPDATE

[Scott Dunlavey]

sorry I forgot to list filters... sorry sorry sorry
 
 
main Rx
6kHz AM/essb 8 pole
2.8k 8 pole
500 Hz 5 pole
250 Hz 8 pole
 
Sub Rx
2.8 8 pole
500Hz 5 pole 
 
scott
w2ntv
 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3/100 P3 for sale

[Scott W2NTV]

K3/100 and P3 up for sale (selling for personal reasons)

K3/100
Sub RX
KATU
KXV3A
KDVR
P3 DSP Panadapter
also has weighted knobs N8BX black (VFO A and VFO B)
rs232/usb cable is included
new from Elecraft website $5129+ $158 (the knobs) = $5287  sell for 
$4600 plus shipping
all factory assembled and from a non smoking  shack.. very very nice 
radio... no marks 9.9/10
will only sell together and USA only... upon request I will send 
photos... please contact w2...@arrl.net ..

**MUST BE A LICENSED AMATEUR RADIO OPERATOR*


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] Wanted: Elecraft K3 and P3 Options KTCX03-1, K144XV and P3SVGA card

[spitze1]

Hi friends!

I am looking for some used Elecraft Options to complete my setup:

1. KTCX03-1 TCXO 0.5 PPM High Stability Oscillator
2. K144XV Internal 2M 10 watt Xcvr
3. P3SVGA card

Drop me an email if you have something above for sale ;-)

Tnx

73s Alex NH7VW (OE6ASF, HB9TSF)



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Wanted-Elecraft-K3-and-P3-Options-KTCX03-1-K144XV-and-P3SVGA-card-tp7564143.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3/RigExpert/P3

[Larry Boekeloo]

I have a great K3 with a RigExpert TI-5.  The TI-5 uses the RS-232 serial port 
on the K3.  I would like to purchase a P3 and see that it also needs to use the 
RS-232 port on the K3.  Is anyone else running the K3/RigExpert TI-5/P3 
combination using some type of Y cable for the RS-232 port?

Thanks.

Larry, KN8N
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3/RigExpert/P3

[Lyle Johnson]

I have a RigExpert Plus, and the RS232 port connects to the P3, then the 
P3 daisy-chains to the K3.  No Y-cable needed.

As a bonus, I can download firmware into the P3 or K3 with this setup.

73,

Lyle KK7P
 I have a great K3 with a RigExpert TI-5.  The TI-5 uses the RS-232 serial 
 port on the K3.  I would like to purchase a P3 and see that it also needs to 
 use the RS-232 port on the K3.  Is anyone else running the K3/RigExpert 
 TI-5/P3 combination using some type of Y cable for the RS-232 port?

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3/RigExpert/P3

[Bob]

Hi Larry.

I use the TI-5 myself and have the K3/P3/KPA500.  As Lyle does with his
RigExpert Plus, you just plug the TI-5 into the P3 serial port.  It works
fine and I've had no issue updating firmware in either unit.

73, Bob, WB4SON
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 and P3

[John Lemay]

Hi all

Rick said 

  If you have a P3, unplug the RS-232 connection(s) and it will show you
your audio during transmit.  That way, you don't have to trust your ears to
make the adjustments in timbre.

Request (Wayne/Eric):  Can we make the P3 have this ability without
unplugging the I/O?  It's VERY handy to watch the transmit audio. 

I second that request.

In addition, I wonder if someone could publish a few screen shots on their
web page to indicate good and bad examples of setting up the K3 transmit
side ?

Many thanks

John G4ZTR
 

__ Information from ESET NOD32 Antivirus, version of virus signature
database 6686 (20111205) __

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] [K3 and P3] KE7X Manual

[Doug Turnbull]

Friends,
Today I received a spiral bound copy of Fred Cady's (KE7X) The Elecraft K3 
Design, Configuration and Operation.   This is a 280 A4 page book describing 
much of what anyone might like to know about the K3, P3 and their accessories.  
 Written by a retired Montana State University professor of EE in a thorough 
manner using many diagrams, photos, block diagrams and schematics to illustrate 
his points it should prove a useful aid to many of us.   To me it is an easier 
read than the K3 manual but then Fred had the manual before starting his book.  
There are exercises and question in the book to help in learning, the 
unmistakable signs of a good text book writer.  You do not need to be macho 
about this, many of us have some learning to do as regards our K3, I am a MSEE 
and retired EE lecturer and have much to learn about my two K3s.  Indeed, Fred 
started writing this book in an effort to teach himself how to use our 
beautiful little radio.

 I have long been bothered in not having the more valuable operating tips 
that appear on this forum easily accessible and while Fred's book does not 
answer my problem, it sure seems helpful in this regard.

 The book is thorough, even covering the configuration of the K3 when 
initially purchased and would be useful for anyone prior to ordering their K3!  
 You would then have it to configure your K3 and when the K3 arrived there 
would be a great set of tutorials on how to best make use of the radio.   The 
index is usually a difficulty for most writers but KE7X has done well for us in 
this regard.

The book is independent in outlook and critical of the K3 in some 
regards, the AGC and its handling of multiple signals in the pass band being an 
example.   This problem has recently been addressed on the forum but it is 
interesting to see a professor critically questioning.   I do not find this 
issue covered adequately in the K3 manual though this is probably too much to 
expect. 

   Fred does not want anyone to order his book just yet as he is doing a 
final edit, my copy was ordered before this warning appeared on his web site.   
You might want to check the following website out if you are interested, 
http://www.ke7x.com/home/guide-to-the-k3 .   I wanted the spiral bound version 
as it is uses double sided quality printing and is always available for a quick 
lookup.   The cost is $35 and delivered to EI land it cost me €31.50. If you 
want to print your own copy then a PDF version is available for $15 and 
obviously there is no shipping.

I do not know Professor Cady (Fred KE7X to all hams) and am not sure if 
he is in my log.   The book seems useful and I wanted to let all of you to know 
my first impressions.   This is going to provide some fun in the next few days.

 One final point, you do not need to be an engineer to get a great deal 
of enjoyment and capability from a K3.   Use default values and you have a 
powerful tool.   But like a fine instrument you can learn to better understand 
the radio and how to make full use of the K3.   This is a thinking man's radio 
and Fred's text looks like it will help in learning to squeeze everything out 
of the K3.   After all was it Wayne the other day who admitted that one of his 
employees helped him out of a problem using the very firmware he designed.
73 Doug EI2CN

 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K3] K3+P3+HRD/Logbk +CW Skimmer -How to set it up?

[Pete Smith]

Another solution, particular given your antenna restrictions, is to 
connect to the Reverse Beacon Network's telnet node and then tell the 
node to filter out all spots except those in your immediate area - 
depending on where you are there is probably a Reverse Beacon nearby.
Try telnet.reversebeacon.net port 7000 or arcluster.reversebeacon.net 
port 7000, depending on whether you are more comfortable with DXSpider 
or ARCluster filter commands.  More info at http://reversebeacon.net

73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at 
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000



On 4/6/2011 11:21 PM, Mike Ransom wrote:
 Now that my K-line station (K3-P3-KPA500) is coming together I have a question
 about setting up CW Skimmer. I am running HRD -LogbookV5 and would like run CW
 Skimmer to the HRD telnet connection, so the spots come from my own equipment
 rather than hams out of my listening area. I am limited to one antenna due to 
 a
 small lot size and currently I don't have the second receiver in the K3. Even 
 if
 I get the KRX3, I am not sure how I would I be able to connect the P3 and run
 the skimmer program.

   
 What am I missing here? Any help or a point in the right direction would be
 appreciated.
   
 ..mike AI6II
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K3] K3+P3+HRD/Logbk +CW Skimmer -How to set it up?

[Mike AI6II]

Thanks Pete, I have used filters on telnet nodes such as VE7CC, which does 
read my filters. Unfortunately I cannot get the filtering to work within 
HRD/LogV5. In any case, I am interested in finding out more about skimmers 
as well, that is for copying code as well as spotting. There is the 
possiblilty of going to SDR-IQ, but I can't figure out how to share one 
antenna or how to keep the P3 online. I have read your other posts 
concerning the K3 and SDR-IQ, but that was about using it instead of the P3 
for a panadapter.

..mike



Another solution, particular given your antenna restrictions, is to
connect to the Reverse Beacon Network's telnet node and then tell the
node to filter out all spots except those in your immediate area -
depending on where you are there is probably a Reverse Beacon nearby.
Try telnet.reversebeacon.net port 7000 or arcluster.reversebeacon.net
port 7000, depending on whether you are more comfortable with DXSpider
or ARCluster filter commands.  More info at http://reversebeacon.net

73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] [K3] K3+P3+HRD/Logbk +CW Skimmer -How to set it up?

[Mike Ransom]

Now that my K-line station (K3-P3-KPA500) is coming together I have a question 
about setting up CW Skimmer. I am running HRD -LogbookV5 and would like run CW 
Skimmer to the HRD telnet connection, so the spots come from my own equipment 
rather than hams out of my listening area. I am limited to one antenna due to a 
small lot size and currently I don't have the second receiver in the K3. Even 
if 
I get the KRX3, I am not sure how I would I be able to connect the P3 and run 
the skimmer program. 

 
What am I missing here? Any help or a point in the right direction would be 
appreciated.
 
..mike AI6II
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 and P3 for sale

[K8AC]

K3 - Serial #5053 , P3 - Serial #994 
Options:
KAT3: Auto-tuner
KRX3: 2nd receiver
KFL3A-2.1K: 2.1 KHz 8 pole filter in main receiver
KFL3A-400: 400 Hz 8 pole filter, one in each receiver
KFL3A-200: 200 Hz 5 pole filter in main receiver
KXV3A: RX Ant, IF Out  Xvrtr Interface

Both receivers have the 2.7 KHz SSB filter

Email me if interested.  No responses here, please.

73, Floyd - K8AC

--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-and-P3-for-sale-tp6184914p6184914.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 and P3 for sale - more info

[K8AC]

The K3 is actually a K3/100.

--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-and-P3-for-sale-tp6184914p6185432.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 K3-P3 Stand (Riser)

[John W2XS]

While looking through the office supply catalog at work, I came across a
monitor stand that looked interesting.  The width dimension (17) was about
the same as the width of the K3 and P3 together. So I bought one and set it
up at home.  It seems to be a perfect fit for the K3 next to the P3
(including the feet on that side of the K3).  I happen to have two small but
heavy (and good sounding) speakers that fit right under the stand. It has
allowed me to set up my vintage Drake equipment on the desk again.

It's the Kantek MS400, available on Amazon for about $22.  I updated the
picture on QRZ dot com (or eHam dot net, which has a bigger picture).

Even though I love the Drakes, there are 9 boxes on the desk instead of 2
for the K3 (including power supply), and up to 14 knobs must be adjusted to
change bands, as opposed to two push-button presses. Using the vintage gear
these days is really a labor of love hi hi.

73,

John W2XS
-- 
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-K3-P3-Stand-Riser-tp5975997p5975997.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3/K144XV/P3 Signal Strength Readings

[Geoffrey Downs]

Having calibrated the K3 S meter and the P3 display with my XG2, I have 50
microvolts equal to S9 and -73dbm (whether or not the preamp is on).
However, on 2m (K144XV) there is a discrepancy between the K3 S
meter and the P3. I believe Alan has told us on the reflector that on 2m
S9 on the P3 is -93dbm in accordance with the IARU standard, but I also
believe that when using the K144XV the K3 S meter still regards S9 as -73dbm
which is different by a factor of 10.

Consequently K3 S meter readings are lower on 2m than they should be. Today,
for example, I had a 2m qso where the two stations I was working were about
S7 on the P3 but S3/4 on the K3 S meter. Is anything going on in the
Elecraft f/w academy to address this?

73 to all

Geoff
G3UCK

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html