Keith,
Yes, If you have a VGA Y cable in that cable mix, it would be pulling
the ACC pin 8 to ground. That is the signal for K3 Power On - pulling
it to ground will automatically send a Power On signal to the K3.
You need a Y cable that has all 15 pins connected, each independent of
each other. A VGA Y cable will not work because it has pins 6, 7, and
8 connected together.
73,
Don W3FPR
On 2/17/2014 10:18 PM, Keith Heimbold wrote:
I have been trying to figure out why my K3 won't power down completely. I
currently have it connected to both a MicroHam USB 3 and a Y connector to my
SPE 1K FA through the ACC. It works perfect when powered on. But shutdown
cycle is not so perfect.
The background light doesn't turn off all the way when powering down and stays
lot without any digits or sound from the receiver. I have been unplugging it to
turn it off, and I noticed that the last time I plugged the power in it came
back on to normal operation.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
