Richard;
You are looking in the wrong place. We made it much easier than that. Make sure
you have the K3 and KPA connected with the AuxIO cable. Now go to a band on the
K3 (matched on the KPA500). With the KPA in STBY, set the power setting on your
K3 to whatever you want - probably 100 watts. Next tap the OP/STBY button on
the KPA to put it in OPER mode. Then adjust the power setting on the KPA to the
lower value for the KPA (25 watts is what you indicated).
After this when you switch the KPA in and out of OPER mode, the K3 will show
you the change on the “B” display and it will automatically set the K3 power
for what you want. I usually set my OPER power while transmitting so that I get
what I want out of the KPA. I have two KPAs & K3s, and each needs a different
TX level to drive the KPA to full power.
Hope this helps!
73,
Jack, W6FB
> On May 28, 2021, at 1:34 PM, Richard wrote:
>
> In the Config Menu:
>
> PWR SET
> If set to PER-BAND, the power level is saved on each band.
> This is especially useful with external amplifiers.
>
> Mine is set to PER-BAND.
>
> If a KPA500 is connected to the K3S via the ACC cable (as mine is),
> two sets of per-band power settings are saved: one
> for “barefoot” operation, one for use with the amp.
>
> Where and how do I save and then access these two savings? Are the somehow
> automatically selected?
>
> In my case I want to save 100 watts for "barefoot" operation and 25 watts for
> amplifier operation. I've tried using Quick Memories 1-9 for bands — which
> works fine — and Quick Memories M1 and M2 for the two power settings for
> each band — which does NOT work.
>
> What's the right way to do this?
>
> Richard Kunc ~ W4KBX
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrin...@me.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
