Re: [Elecraft] KAT500 with KX3

[tomb18]

HiWin4K3Suite supports this without hardware. 73 Tom


Sent from my Samsung Galaxy smartphone. Original message From: 
Jim Brown <j...@audiosystemsgroup.com> Date: 2016-05-20  3:56 PM  (GMT-05:00) 
To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KAT500 with KX3 
This looks like a nice pieces of software, but it is only needed if 
you're feeding the KAT500 less than 10-20W (that is, KX3 barefoot). The 
KAT500 senses operating frequency from RF, but it needs about that level 
to do so.

Another good reason for using this band decoder is to automatically 
switch antennas or bandpass filters.

73, Jim K9YC

On Fri,5/20/2016 11:28 AM, ke9uw wrote:
> You need the Paula Keezer KX3 band decoder. Makes the KX3 look like a K3 for
> the purpose.
>
> http://www.nx1p.net/what-is-a-kx3-band-decoder/

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT500 with KX3

[Jim Brown]

This looks like a nice pieces of software, but it is only needed if 
you're feeding the KAT500 less than 10-20W (that is, KX3 barefoot). The 
KAT500 senses operating frequency from RF, but it needs about that level 
to do so.


Another good reason for using this band decoder is to automatically 
switch antennas or bandpass filters.


73, Jim K9YC

On Fri,5/20/2016 11:28 AM, ke9uw wrote:

You need the Paula Keezer KX3 band decoder. Makes the KX3 look like a K3 for
the purpose.

http://www.nx1p.net/what-is-a-kx3-band-decoder/


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT500 with KX3

[ke9uw]

You need the Paula Keezer KX3 band decoder. Makes the KX3 look like a K3 for
the purpose.

http://www.nx1p.net/what-is-a-kx3-band-decoder/



-
Chuck, KE9UW
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KAT500-with-KX3-tp7617615p7617672.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT500 with KX3

[Michael Blake]

Yes Bill, I believe that is correct but I want it to band follow so that the 
solution will be set to the last correct solution for the current frequency 
when only receiving.  It follows the K3/KPA500  and the the question is “how do 
I implement this with the KX3?

Michael Blake







> On May 19, 2016, at 12:24 PM, Nr4c  wrote:
> 
> I believe it will sense RF on a dit or two. So only the coax is required.  
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On May 19, 2016, at 11:06 AM, Michael Blake  wrote:
>> 
>> Which data connection(s) do I use to control the band/frequency settings on 
>> the KAT500 when the transceiver is a KX3?  The amplifier is a low drive 
>> modified ALS-600 which seems like a straight forward keying connection but I 
>> am not sure about the data connection from the KX3’s E980232 "Cable Adapter 
>> 6” RCA & 3.5mm”.
>> 
>> Stated differently which interconnecting cables do I need to order to cause 
>> the KAT500 to frequency track the KX3?
>> 
>> Michael Blake
>> 
>> 
>> 
>> 
>> 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n...@widomaker.com
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT500 with KX3

[Nr4c]

I believe it will sense RF on a dit or two. So only the coax is required.  

Sent from my iPhone
...nr4c. bill


> On May 19, 2016, at 11:06 AM, Michael Blake  wrote:
> 
> Which data connection(s) do I use to control the band/frequency settings on 
> the KAT500 when the transceiver is a KX3?  The amplifier is a low drive 
> modified ALS-600 which seems like a straight forward keying connection but I 
> am not sure about the data connection from the KX3’s E980232 "Cable Adapter 
> 6” RCA & 3.5mm”.
> 
> Stated differently which interconnecting cables do I need to order to cause 
> the KAT500 to frequency track the KX3?
> 
> Michael Blake
> k9...@mac.com 
> 
> 
> 
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KAT500 with KX3

[Michael Blake]

Which data connection(s) do I use to control the band/frequency settings on the 
KAT500 when the transceiver is a KX3?  The amplifier is a low drive modified 
ALS-600 which seems like a straight forward keying connection but I am not sure 
about the data connection from the KX3’s E980232 "Cable Adapter 6” RCA & 3.5mm”.

Stated differently which interconnecting cables do I need to order to cause the 
KAT500 to frequency track the KX3?

Michael Blake
k9...@mac.com 






__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com