Re: [Elecraft] KIO3B woes
Set L3 to USB not 38400. Sent from my iPhone ...nr4c. bill > On May 6, 2016, at 9:34 PM, Steve Ward wrote: > > Hi all, so I just got back in town last night, and I wanted to get my new > KIO3B installed in s/n 1544 so I could give it a run during 7QP. Assembly > went smoothly enough and the "Y" cable to the P3 seems to be doing its thing > just fine. > > But my Windows 10 computer isn't talking to the K3 or the P3 anymore. Device > manager sees both the sound card and the serial port (assigned to COM5) but > neither the K3 utility or the P3 utility (both latest versions) can talk with > their respective equipment. They just cycle through all the baud rates trying > to make a connection (I checked and both K3 and P3 are set to 38400). > > What have I missed? I checked all the firmware revisions before starting and > everything looks just fine. I double checked the position of the slide > switch on the I/O board before closing the radio up. Any ideas? I would > hate to have to tear it all apart again tonight just to get on the air for > the contest tomorrow, but it's starting to look like that's my answer. > Please copy me on any replies because I get the digest version of the > reflector and it'll be a while before another one comes through. > > Thanks everyone! > > 73, > Steve > AD7OG > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B woes
That was it! ID10T error strikes again On Friday, May 6, 2016, Ed Muns wrote: > Make sure you have set 'USB' in the K3 CONFIG menu RS232 item. > > Ed W0YK > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net ] > On Behalf Of Steve > Ward > Sent: 06 May, 2016 18:34 > To: elecraft@mailman.qth.net > Subject: [Elecraft] KIO3B woes > > Hi all, so I just got back in town last night, and I wanted to get my > new KIO3B installed in s/n 1544 so I could give it a run during 7QP. > Assembly went smoothly enough and the "Y" cable to the P3 seems to be > doing its thing just fine. > > But my Windows 10 computer isn't talking to the K3 or the P3 anymore. > Device manager sees both the sound card and the serial port (assigned to > COM5) but neither the K3 utility or the P3 utility (both latest > versions) can talk with their respective equipment. They just cycle > through all the baud rates trying to make a connection (I checked and > both K3 and P3 are set to 38400). > > What have I missed? I checked all the firmware revisions before > starting and everything looks just fine. I double checked the position > of the slide switch on the I/O board before closing the radio up. Any > ideas? I would hate to have to tear it all apart again tonight just to > get on the air for the contest tomorrow, but it's starting to look like > that's my answer. Please copy me on any replies because I get the > digest version of the reflector and it'll be a while before another one > comes through. > > Thanks everyone! > > 73, > Steve > AD7OG > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to e...@w0yk.com > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B woes
Make sure you have set 'USB' in the K3 CONFIG menu RS232 item. Ed W0YK -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Steve Ward Sent: 06 May, 2016 18:34 To: elecraft@mailman.qth.net Subject: [Elecraft] KIO3B woes Hi all, so I just got back in town last night, and I wanted to get my new KIO3B installed in s/n 1544 so I could give it a run during 7QP. Assembly went smoothly enough and the "Y" cable to the P3 seems to be doing its thing just fine. But my Windows 10 computer isn't talking to the K3 or the P3 anymore. Device manager sees both the sound card and the serial port (assigned to COM5) but neither the K3 utility or the P3 utility (both latest versions) can talk with their respective equipment. They just cycle through all the baud rates trying to make a connection (I checked and both K3 and P3 are set to 38400). What have I missed? I checked all the firmware revisions before starting and everything looks just fine. I double checked the position of the slide switch on the I/O board before closing the radio up. Any ideas? I would hate to have to tear it all apart again tonight just to get on the air for the contest tomorrow, but it's starting to look like that's my answer. Please copy me on any replies because I get the digest version of the reflector and it'll be a while before another one comes through. Thanks everyone! 73, Steve AD7OG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to e...@w0yk.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KIO3B woes
Hi all, so I just got back in town last night, and I wanted to get my new KIO3B installed in s/n 1544 so I could give it a run during 7QP. Assembly went smoothly enough and the "Y" cable to the P3 seems to be doing its thing just fine. But my Windows 10 computer isn't talking to the K3 or the P3 anymore. Device manager sees both the sound card and the serial port (assigned to COM5) but neither the K3 utility or the P3 utility (both latest versions) can talk with their respective equipment. They just cycle through all the baud rates trying to make a connection (I checked and both K3 and P3 are set to 38400). What have I missed? I checked all the firmware revisions before starting and everything looks just fine. I double checked the position of the slide switch on the I/O board before closing the radio up. Any ideas? I would hate to have to tear it all apart again tonight just to get on the air for the contest tomorrow, but it's starting to look like that's my answer. Please copy me on any replies because I get the digest version of the reflector and it'll be a while before another one comes through. Thanks everyone! 73, Steve AD7OG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com