Re: [Elecraft] KX3 CW Decode question
Thanks to all. I also confirmed this experimentally. However, even turning decode off on the rig, I still get spurious dropped characters from the utility. It's not a showstopper to me because (a) I'm not looking to bring the computer along on field expeditions, and (b) I'm hoping at some near point in the future to use the CW decoder that is between my ears. Hi hi. --- 72, Rich Hurd / WC3T / DMR: 3142737 PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* On Sun, Nov 26, 2017 at 7:58 PM, Cady, Fred <fc...@montana.edu> wrote: > You must have the KX3 decoding to display text on the PX3. The PX3 > doesn't decode. What you shouldn't do is try to display on the PX3 and the > KX3 Utility at the same time. > > > *Note:* To display CW, RTTY or PSK decoded signals on the PX3, you must > activate text decoding on the KX3. > > Make sure that you do not have the KX3 Utility Terminal program active to > display and send text while you are trying to use the PX3 keyboard, or vice > verse. The KX3’s text decode can be fed to only one place. You will see > dropped characters if the utility is active when using the keyboard. They > both cannot be used at the same time. > > > Cheers, > > Fred KE7X > > > For info on all KE7X books, see www.ke7x.com > > > > -- > *From:* elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> > on behalf of rich hurd WC3T <r...@wc3t.us> > *Sent:* Sunday, November 26, 2017 5:26 PM > *To:* tomb18 > *Cc:* elecraft@mailman.qth.net; MaverickNH > *Subject:* [Elecraft] KX3 CW Decode question > > Hi Tom (or anyone else who knows), > > Does this also hold true for the decode function in the KX3 and the PX3? > Should I not run those simultaneously either? Or is it only the > interaction between the hardware and the utility program? > > On Sat, Nov 25, 2017 at 15:17 tomb18 <tom...@videotron.ca> wrote: > > > HiActually what is happening is that both the p3 svga and the utility are > > attempting to get access to the decoded text at the same time so when > one > > gets a character, the other misses it.. If you wish to use the utility, > > just turn off text decoding display on the svga. 73 Tom > > > > > > Sent from my Samsung Galaxy smartphone. > > Original message From: MaverickNH < > cbjesse...@comcast.net> > > Date: 2017-11-25 2:31 PM (GMT-05:00) To: elecraft@mailman.qth.net > > Subject: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle > > I have always had problems using the K3 Utility to change configurations > > from > > another mode to CW, as I could see text decode on the K3S VFO B display > > area > > after a restore to my CW configuration but not on the P3-SVGA external > > display without a lot of fiddling. I see now that simply turning the P3 > > on/off is required after a configuration restore to get that text decode > to > > display. > > > > I would make a note of that but would just forget where I put it. Now, > it's > > right here for me to find! > > > > Bret/N4SRN > > > > > > > > -- > > Sent from: http://elecraft.365791.n2.nabble.com/ > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net <Elecraft@mailman.qth.net> > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to tom...@videotron.ca > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net <Elecraft@mailman.qth.net> > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to r...@wc3t.us > > -- > --- > 72, > Rich Hurd / WC3T / DMR: 3142737 > PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer > for Scouting > Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: > *FN20is* > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@m
Re: [Elecraft] KX3 CW Decode question
You must have the KX3 decoding to display text on the PX3. The PX3 doesn't decode. What you shouldn't do is try to display on the PX3 and the KX3 Utility at the same time. Note: To display CW, RTTY or PSK decoded signals on the PX3, you must activate text decoding on the KX3. Make sure that you do not have the KX3 Utility Terminal program active to display and send text while you are trying to use the PX3 keyboard, or vice verse. The KX3’s text decode can be fed to only one place. You will see dropped characters if the utility is active when using the keyboard. They both cannot be used at the same time. Cheers, Fred KE7X For info on all KE7X books, see www.ke7x.com<http://www.ke7x.com> From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on behalf of rich hurd WC3T <r...@wc3t.us> Sent: Sunday, November 26, 2017 5:26 PM To: tomb18 Cc: elecraft@mailman.qth.net; MaverickNH Subject: [Elecraft] KX3 CW Decode question Hi Tom (or anyone else who knows), Does this also hold true for the decode function in the KX3 and the PX3? Should I not run those simultaneously either? Or is it only the interaction between the hardware and the utility program? On Sat, Nov 25, 2017 at 15:17 tomb18 <tom...@videotron.ca> wrote: > HiActually what is happening is that both the p3 svga and the utility are > attempting to get access to the decoded text at the same time so when one > gets a character, the other misses it.. If you wish to use the utility, > just turn off text decoding display on the svga. 73 Tom > > > Sent from my Samsung Galaxy smartphone. > Original message From: MaverickNH <cbjesse...@comcast.net> > Date: 2017-11-25 2:31 PM (GMT-05:00) To: elecraft@mailman.qth.net > Subject: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle > I have always had problems using the K3 Utility to change configurations > from > another mode to CW, as I could see text decode on the K3S VFO B display > area > after a restore to my CW configuration but not on the P3-SVGA external > display without a lot of fiddling. I see now that simply turning the P3 > on/off is required after a configuration restore to get that text decode to > display. > > I would make a note of that but would just forget where I put it. Now, it's > right here for me to find! > > Bret/N4SRN > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to tom...@videotron.ca > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@wc3t.us -- --- 72, Rich Hurd / WC3T / DMR: 3142737 PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fc...@montana.edu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 CW Decode question
HiYes it applies there as well. When you use software that is reading the decoded CW, it is requesting the characters from the radio. Same thing with the p3 and px3. They end up competing with each other. So if you use software to get the CW, turn off the p3 or px3 decoing. 73 Tom Sent from my Samsung Galaxy smartphone. Original message From: rich hurd WC3TDate: 2017-11-26 7:26 PM (GMT-05:00) To: tomb18 Cc: MaverickNH , elecraft@mailman.qth.net Subject: KX3 CW Decode question Hi Tom (or anyone else who knows), Does this also hold true for the decode function in the KX3 and the PX3? Should I not run those simultaneously either? Or is it only the interaction between the hardware and the utility program? On Sat, Nov 25, 2017 at 15:17 tomb18 wrote: HiActually what is happening is that both the p3 svga and the utility are attempting to get access to the decoded text at the same time so when one gets a character, the other misses it.. If you wish to use the utility, just turn off text decoding display on the svga. 73 Tom Sent from my Samsung Galaxy smartphone. Original message From: MaverickNH Date: 2017-11-25 2:31 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle I have always had problems using the K3 Utility to change configurations from another mode to CW, as I could see text decode on the K3S VFO B display area after a restore to my CW configuration but not on the P3-SVGA external display without a lot of fiddling. I see now that simply turning the P3 on/off is required after a configuration restore to get that text decode to display. I would make a note of that but would just forget where I put it. Now, it's right here for me to find! Bret/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@wc3t.us-- ---72,Rich Hurd / WC3T / DMR: 3142737 PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer for ScoutingLatitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: FN20is __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 CW Decode question
Hi Tom (or anyone else who knows), Does this also hold true for the decode function in the KX3 and the PX3? Should I not run those simultaneously either? Or is it only the interaction between the hardware and the utility program? On Sat, Nov 25, 2017 at 15:17 tomb18wrote: > HiActually what is happening is that both the p3 svga and the utility are > attempting to get access to the decoded text at the same time so when one > gets a character, the other misses it.. If you wish to use the utility, > just turn off text decoding display on the svga. 73 Tom > > > Sent from my Samsung Galaxy smartphone. > Original message From: MaverickNH > Date: 2017-11-25 2:31 PM (GMT-05:00) To: elecraft@mailman.qth.net > Subject: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle > I have always had problems using the K3 Utility to change configurations > from > another mode to CW, as I could see text decode on the K3S VFO B display > area > after a restore to my CW configuration but not on the P3-SVGA external > display without a lot of fiddling. I see now that simply turning the P3 > on/off is required after a configuration restore to get that text decode to > display. > > I would make a note of that but would just forget where I put it. Now, it's > right here for me to find! > > Bret/N4SRN > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to tom...@videotron.ca > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@wc3t.us -- --- 72, Rich Hurd / WC3T / DMR: 3142737 PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 CW Decode
It seems you turned text decode to TX only. This will decode what you send with paddles (not hand key) but will not decode received stations. Sent from my iPhone ...nr4c. bill > On Dec 6, 2016, at 3:45 PM, Aaron K5ATGwrote: > > I am in the process of learning CW and I am having a little bit of issue > with my KX3 on decoding CW. I am wanting it to be able to decode CW on TX > only so I can work on sending. By pressing the DATA button I selected TX > ONLY and I have the power setting at 0.0 watts into a dummy load. I am > using the plug in paddles for the KX3. However it will not decode anything. > I tuned to a strong signal and tried the different RX Thresholds and it > would not decode anything there either. I am not sure if I have it set up > right or I am missing a setting or something. Can anyone please help? > > Thank you > Aaron Scott K5ATG > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 CW Decode
Aaron, To decode CW, you need to be in CW mode, not DATA. You need to set the TEXT entry to TX only. See the Text Decode and Display in the manual. 73, Don W3FPR On 12/6/2016 3:45 PM, Aaron K5ATG wrote: I am in the process of learning CW and I am having a little bit of issue with my KX3 on decoding CW. I am wanting it to be able to decode CW on TX only so I can work on sending. By pressing the DATA button I selected TX ONLY and I have the power setting at 0.0 watts into a dummy load. I am using the plug in paddles for the KX3. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 CW Decode
I am in the process of learning CW and I am having a little bit of issue with my KX3 on decoding CW. I am wanting it to be able to decode CW on TX only so I can work on sending. By pressing the DATA button I selected TX ONLY and I have the power setting at 0.0 watts into a dummy load. I am using the plug in paddles for the KX3. However it will not decode anything. I tuned to a strong signal and tried the different RX Thresholds and it would not decode anything there either. I am not sure if I have it set up right or I am missing a setting or something. Can anyone please help? Thank you Aaron Scott K5ATG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com