Re: [Elecraft] Macro programming for KX3
I had a quick look at the programmer's reference, and saw some commands: IC will read the status of the OFS LED MP can be used to set the VFO OFS menu setting (maybe setting to off and back to on will put the OFS LED in a known state?) SWT can be used to tap the OFS knob, which will toggle the LED Maybe if you have a play with these commands you'll find out what is possible. 73, Matt VK2RQ On 11 Mar 2015, at 6:37 am, geoff allsup gall...@whoi.edu wrote: Been playing with macros a bit and am wondering if there is a command available to set the Offset/VFO B control to VFO B? Haven't spotted something like that in the programmer's reference. geoff - W1OH -- *** Geoff Allsup, W1OH gall...@whoi.edu or w...@whoi.edu Senior Engineer Upper Ocean Processes Group Woods Hole Oceanographic InstitutionWoods Hole, MA, USA *** __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to matt.vk...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Macro programming for KX3
Been playing with macros a bit and am wondering if there is a command available to set the Offset/VFO B control to VFO B? Haven't spotted something like that in the programmer's reference. geoff - W1OH -- *** Geoff Allsup, W1OH gall...@whoi.edu or w...@whoi.edu Senior Engineer Upper Ocean Processes Group Woods Hole Oceanographic InstitutionWoods Hole, MA, USA *** __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Macro programming for KX3
Geoff, Switch 35 Tap will toggle it. I do not see an explicit command to set it to VFO B. You can explicitly set the frequency of VFO B with the FB command. I do not understand the utility of simply changing the Offset/VFO B switch if you have to turn the knob. If it is set incorrectly, just tap the knob - but then, you have apparently not presented the entire picture of what you are trying to accomplish via the macro. 73, Don W3FPR On 3/10/2015 3:37 PM, geoff allsup wrote: Been playing with macros a bit and am wondering if there is a command available to set the Offset/VFO B control to VFO B? Haven't spotted something like that in the programmer's reference. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com